Table of Contents
Acer Nitro XV431C Pwmiiphx User Manual
Displayed below is the user manual for Nitro XV431C Pwmiiphx by Acer which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
Acer LCD Monitor
User Guide
Copyright © 2020. Acer Incorporated.
All Rights Reserved.
Acer LCD Monitor User Guide
Original Issue: 12/2020
Acer LCD Monitor User Guide
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other
companies' product names or trademarks are used herein for identification purposes
only and belong to their respective companies.
Changes may be made periodically to the information in this publication without
obligation to notify any person of such revisions or changes. Such changes will be
incorporated in new editions of this manual or supplementary documents and
publications. This company makes no representations or warranties, either expressed
or implied, with respect to the contents hereof and specifically disclaims the implied
warranties of merchantability or fitness for a particular purpose.
Record the model number, serial number, purchase date and place of purchase
information in the space provided below. The serial number and model number are
recorded on the label affixed to your computer. All correspondence concerning your
unit should include the serial number, model number and purchase information.
No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, electronically, mechanically, by photocopy,
recording or otherwise, without the prior written permission of Acer Incorporated.
Model number: ___________________________________
Serial number: ___________________________________
Date of purchase: _________________________________
Place of purchase: ________________________________
iii
English
Information for Your Safety and Comfort
Safety instructions
Read these instructions carefully. Keep this document for future reference. Follow all
warnings and instructions marked on the product.
Special notes on LCD monitors
The following are normal with the LCD monitor and do not indicate a problem.
•Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn
off the power switch and then turn it on again to make sure the flicker disappears.
•You may find slightly uneven brightness on the screen depending on the desktop pattern
you use.
•The LCD screen has 99.99% or more effective pixels. It may include blemishes of 0.01%
or less such as a missing pixel or a pixel lit all the time.
•Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screen is recovered slowly by changing the image or turning off the power switch for a
few hours.
Cleaning your monitor
Please carefully follow these guidelines when cleaning the monitor:
•Always unplug the monitor before cleaning.
•Use a soft cloth to wipe the screen and cabinet front and sides.
Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible and located as
close to the equipment operator as possible. When you need to disconnect power from the
equipment, be sure to unplug the power cord from the electrical outlet.
Safe listening
To protect your hearing, follow these instructions.
•Gradually increase the volume until you can hear it clearly and comfortably and without
distortion.
•After setting the volume level, do not increase it after your ears have adjusted.
•Limit the amount of time listening to music at high volume.
•Avoid turning up the volume to block out noisy surroundings.
•Turn the volume down if you can't hear people speaking near you.
iv
English
Warnings
•Do not use this product near water.
•Do not place this product on an unstable cart, stand or table. If the product falls, it could
be seriously damaged.
•Slots and openings are provided for ventilation to ensure reliable operation of the
product and to protect it from overheating. These openings must not be blocked or
covered. The openings should never be blocked by placing the product on a bed, sofa,
rug or other similar surface. This product should never be placed near or over a radiator
or heat register, or in a built-in installation unless proper ventilation is provided.
•Never push objects of any kind into this product through cabinet slots as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric shock.
Never spill liquid of any kind onto or into the product.
•To avoid damage of internal components and to prevent battery leakage, do not place
the product on a vibrating surface.
•Never use it under sporting, exercising, or any vibrating environment which will probably
cause unexpected short current or damage internal devices.
Using electrical power
•This product should be operated from the type of power indicated on the marking label. If
you are not sure of the type of power available, consult your dealer or local power
company.
•If an extension cord is used with this product, make sure that the total ampere rating of
the equipment plugged into the extension cord does not exceed the extension cord
ampere rating. Also, make sure that the total rating of all products plugged into the wall
outlet does not exceed the fuse rating.
•Do not overload a power outlet, strip or receptacle by plugging in too many devices. The
overall system load must not exceed 80% of the branch circuit rating. If power strips are
used, the load should not exceed 80% of the power strip's input rating.
Note: The grounding pin also provides good protection from unexpected noise
produced by other nearby electrical devices that may interfere with the
performance of this product.
Product servicing
Do not attempt to service this product yourself, as opening or removing covers may expose
you to dangerous voltage points or other risks. Refer all servicing to qualified service
personnel.
Unplug this product from the wall outlet and refer servicing to qualified service personnel
when:
•the power cord or plug is damaged, cut or frayed
•liquid was spilled into the product
•the product was exposed to rain or water
•the product has been dropped or the case has been damaged
•the product exhibits a distinct change in performance, indicating a need for service
•the product does not operate normally after following the operating instructions
v
English
Note: Adjust only those controls that are covered by the operating instructions,
since improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the product to
normal condition.
Potentially explosive environments
Switch off your device in any area with a potentially explosive atmosphere and obey all signs
and instructions. Potentially explosive atmospheres include areas where you would normally
be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or
fire resulting in bodily injury or even death. Switch off the device near gas pumps at service
stations. Observe restrictions on the use of radio equipment in fuel depots, storage and
distribution areas; chemical plants; or where blasting operations are in progress. Areas with a
potentially explosive atmosphere are often, but not always, marked. They include below deck
on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such
as propane or butane), and areas where the air contains chemicals or particles such as grain,
dust or metal powders.
Additional safety information
Your device and its enhancements may contain small parts. Keep them out of the reach of
small children.
IT Equipment Recycling Information
Acer is strongly committed to environmental protection and views recycling, in the form of
salvaging and disposal of used equipment, as one of the company's top priorities in
minimizing the burden placed on the environment.
We at Acer are very conscious of the environmental effects of our business and strive to
identify and provide the best working procedures to reduce the environmental impact of our
products.
For more information and help when recycling, please go to this website:
https://www.acer-group.com/sustainability/en/our-products-environment.html
Visit www.acer-group.com for further information on the features and benefits of our other
products.
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize
pollution and ensure utmost protection of the global environment, please
recycle. For more information on the Waste from Electrical and Electronics
Equipment (WEEE) regulations, visit
https://www.acer-group.com/sustainability/en/our-products-environment.html
Acer monitor is purposed for video and visual display of information obtained from electronic
devices.
vi
English
LCD pixel statement
The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some
pixels may occasionally misfire or appear as black or red dots. This has no effect on the
recorded image and does not constitute a malfunction.
This product has been shipped enabled for power management:
•Activate display’s Sleep mode within 5 minutes of user inactivity.
•Wake the monitor when it is in Active Off mode, move the mouse or press any keyboard
key.
Tips and information for comfortable use
Computer users may complain of eyestrain and headaches after prolonged use. Users are
also at risk of physical injury after long hours of working in front of a computer. Long work
periods, bad posture, poor work habits, stress, inadequate working conditions, personal
health and other factors greatly increase the risk of physical injury.
Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis, tenosynovitis or
other musculoskeletal disorders. The following symptoms may appear in the hands, wrists,
arms, shoulders, neck or back:
•numbness, or a burning or tingling sensation
•aching, soreness or tenderness
•pain, swelling or throbbing
•stiffness or tightness
•coldness or weakness
If you have these symptoms, or any other recurring or persistent discomfort and/or pain
related to computer use, consult a physician immediately and inform your company's health
and safety department.
The following section provides tips for more comfortable computer use.
Finding your comfort zone
Find your comfort zone by adjusting the viewing angle of the monitor, using a footrest, or
raising your sitting height to achieve maximum comfort. Observe the following tips:
•refrain from staying too long in one fixed posture
•avoid slouching forward and/or leaning backward
•stand up and walk around regularly to remove the strain on your leg muscles
Taking care of your vision
Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room
lighting, poorly focused screens, very small typefaces and low-contrast displays could stress
your eyes. The following sections provide suggestions on how to reduce eyestrain.
Eyes
•Rest your eyes frequently.
•Give your eyes regular breaks by looking away from the monitor and focusing on a
distant point.
•Blink frequently to keep your eyes from drying out.
vii
English
Display
•Keep your display clean.
•Keep your head at a higher level than the top edge of the display so your eyes point
downward when looking at the middle of the display.
•Adjust the display brightness and/or contrast to a comfortable level for enhanced text
readability and graphics clarity.
•Eliminate glare and reflections by:
•placing your display in such a way that the side faces the window or any light
source
•minimizing room light by using drapes, shades or blinds
•using a task light
•changing the display's viewing angle
•using a glare-reduction filter
•using a display visor, such as a piece of cardboard extended from the display's top
front edge
•Avoid adjusting your display to an awkward viewing angle.
•Avoid looking at bright light sources, such as open windows, for extended periods of
time.
Developing good work habits
Develop the following work habits to make your computer use more relaxing and productive:
•Take short breaks regularly and often.
•Perform some stretching exercises.
•Breathe fresh air as often as possible.
•Exercise regularly and maintain a healthy body.
Never place a LCD Monitor in an unstable location. A LCD Monitor may fall, causing serious
personal injury or death. Many injuries, particularly to children, can be avoided by taking
simple precautions such as:
•Using cabinets or stands recommended by the manufacturer of the LCD Monitor.
•Only using furniture that can safely support the LCD Monitor.
•Ensuring the LCD Monitor is not overhanging the edge of the supporting furniture.
•Not placing the LCD Monitor on tall furniture (for example, cupboards or bookcases)
without anchoring both the furniture and the LCD Monitor to a suitable support.
•Not placing the LCD Monitor on cloth or other materials that may be located between the
LCD Monitor and supporting furniture.
•Educating children about the dangers of climbing on furniture to reach the LCD Monitor
or its controls.
•If the existing LCD Monitor is going to be retained and relocated, the same
considerations as above should be applied.
Declaration of Conformity
We,
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan, R.O.C
And,
Acer Italy s.r.l.
Via Lepetit, 40, 20020 Lainate (MI) Italy
Tel: +39-02-939-921, Fax: +39-02 9399-2913
www.acer.it
Product:
Trade Name:
Model Number:
SKU Number:
LCD Monitor
acer
XV431C
XV431C xxxxxxxx
(“x” = 0~9, a ~ z, A ~ Z, or blank)
We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in
conformity with the relevant Union harmonization legislations as below Directive and following harmonized
standards and/or other relevant standards have been applied:
Year to begin affixing CE marking: 2020.
_______________________________
RU Jan / Manager Date
Acer Incorporated (Taipei, Taiwan)
EMC Directive: 2014/30/EU
EN55032:2015+AC:2016 Class B
EN61000-3-2:2014 Class D
EN 55024:2010+A1:2015
EN61000-3-3:2013
LVD Directive: 2014/35/EU
EN62368-1:2014+A11:2017
RoHS Directive: 2011/65/EU
EN 50581:2012
ErP Directive: 2009/125/EC
(EU)2019/2021; EN 50564:2011
Dec. 31, 2020
ix
English
Acer America Corporation
333 West San Carlos St., Suite 1500
San Jose, CA 95110, U. S. A.
Tel: 254-298-4000
Fax: 254-298-4147
www.acer.com
Federal Communications Commission
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
The following local Manufacturer / Importer is responsible for this declaration:
Product: LCD Monitor
Model Number: XV431C
SKU Number: XV431C xxxxxxxx
(“x” = 0~9, a ~ z, A ~ Z, or Blank)
Name of Responsible Party: Acer America Corporation
Address of Responsible Party:
333 West San Carlos St.,
Suite 1500
San Jose, CA 95110,
U. S. A.
Contact Person: Acer Representative
Phone No.: 254-298-4000
Fax No.: 254-298-4147
x
English
Information for Your Safety and Comfort iii
Safety instructions iii
Special notes on LCD monitors iii
Cleaning your monitor iii
Accessibility iii
Safe listening iii
Warnings iv
Using electrical power iv
Product servicing iv
Potentially explosive environments v
Additional safety information v
IT Equipment Recycling Information v
Disposal instructions v
LCD pixel statement vi
Tips and information for comfortable use vi
Finding your comfort zone vi
Taking care of your vision vi
Developing good work habits vii
PACKAGE CONTENTS 1
Attaching the monitor to the base 2
Attaching the monitor on the wall 2
SCREEN POSITION ADJUSTMENT 3
CONNECTING THE POWER CORD 4
Connecting the adapter and AC Power cord 4
POWER SAVING 4
Display Data Channel (DDC) 5
20-Pin Color Display Signal Cable 5
19-Pin Color Display Signal Cable 6
STANDARD TIMING TABLE 7
Connecting Your Monitor to a Computer 8
External Controls 9
Using the Shortcut Menu 10
Contents
1
English
PACKAGE CONTENTS
LCD Monitor AC Power Cord DP Cable (Optional)
HDMI Cable (Optional) Remote Control Quick Start Guide
VESA Adapter Mounting Kit
HDMI
HDMI
USER GUIDE
LCD Monitor NITRO XV1 Series/XV431C
2
English
Attaching the monitor to the base
Attaching the monitor on the wall
Remark:
• Please check monitor weight in advance to choose suitable load capacity of VESA arm
stand.
1. Unpack the box. 2. Take the Styrofoam with display out of the
box.
3. Remove the top Styrofoam. 4. Tighten the base and stand arm with three
screws.
5. Attach the base of step 4 to the quick
release notch of the LCD monitor securely.
6. Flip the LCD monitor over to make it stand
upright on the desk where it will be used.
(Note: Do NOT press the screen to avoid
damage any time.)
1. Connect the VESA Adapter Mounting Kit
with screws (M4x16mm 4pcs)
2. Connect the monitor onto the wall.
Mount
(Not included)
3
English
SCREEN POSITION ADJUSTMENT
To optimize the viewing position, you can adjust the monitor tilt by using both of your hands to
hold the edges of the monitor. The monitor can be adjusted to 15 degrees up or 5 degrees
down.
Note: Do NOT press the screen with fingers.
Do NOT grasp the corners or the left and right sides of the monitor to adjust tilt.
15 -
4
English
CONNECTING THE POWER CORD
• This monitor has a universal power supply that allows operation in either 100/120V AC or
220/240 V AC voltage area. No user-adjustment is required.
Connecting the adapter and AC Power cord
• Check first to make sure that the power cord you use is the correct type required for your
area.
• The monitor has a universal power supply that allows operation in either 100/120 V AC or
220/240 V AC voltage area. No user-adjustment is required.
• Plug one end of the AC power cord to the Adapter, and plug the other end into an AC
outlet.
• For units using 120 V AC:
• Use a UL-listed cord set, type SVT wire and plug rated 10 A/125 V.
• For units using 220/240 V AC:
• Use a cord set consisting of H05VV-F cord and plug rated 10 A/250 V. The cord set
should have the appropriate safety approvals for the country in which the equipment will
be installed.
POWER SAVING
The power saving states will be kept until a control signal has been detected or the keyboard
or mouse is activated. The recovery time from Active OFF state back to ON state is around 3
seconds.
State LED Light
ON Blue
Power Saving Blinking Blue
5
English
Display Data Channel (DDC)
To make your installation easier, the monitor is able to Plug and Play with your system if your
system also supports DDC protocol. The DDC (Display Data Channel) is a communication
protocol through which the monitor automatically informs the host system about its
capabilities, for example, supported resolutions and corresponding timing. The monitor
supports DDC2B standard.
20-Pin Color Display Signal Cable
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1DP_3.3V 2GND
3HPD 4AUX_CH_N
5 GND 6 AUX_CH_P
7 GND 8 GND
9ML_LANE0_P 10 GND
11 ML_LANE0-N 12 ML_LANE1-P
13 GND 14 ML_LANE1-N
15 ML_LANE2-P 16 GND
17 ML_LANE2-N 18 ML_LANE3-P
19 GND 20 ML_LANE3-N
6
English
19-Pin Color Display Signal Cable
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1DATA2- 2GND
3DATA2+ 4DATA1-
5GND 6DATA1+
7DATA0- 8GND
9DATA0+ 10 DCLK-
11 GND 12 DCLK+
13 NC 14 NC
15 HDMI_SCL 16 HDMI_SDA
17 HDMI_DET 18 HDMI15V
19 HDMI_HPD
7
English
STANDARD TIMING TABLE
Mode Resolution
VGA
640 x 480 60 Hz
640 x 480 72 Hz
640 x 480 75 Hz
MAC 640 x 480 66.66 Hz
MAC 1152 x 870 75Hz
VESA 720 x 400 70 Hz
SVGA
800 x 600 56 Hz
800 x 600 60 Hz
800 x 600 72 Hz
800 x 600 75 Hz
XGA
1024 x 768 60 Hz
1024 x 768 70 Hz
1024 x 768 75 Hz
SXGA 1280 x1024 60 Hz
1280 x1024 75 Hz
VESA
VESA
1280 x 720 60 Hz
1152 x 864 75 Hz
1280 x 960 60 Hz
WXGA+ 1440 x 900 60 Hz
WSXGA+ 1680 x 1050 60 Hz
UXGA 1600 x 1200 60 Hz
QHD 2560 x 1440 60 Hz
FHD 1920 x 1080 60 Hz
DFHD
3840 x 1080 60 Hz
3840 x 1080 120 Hz
Note: DP (1.2): 3840x1080 supports to 120Hz in normal mode， FreeSync Premium
and HDR technology.
HDMI (2.0): 3840x1080 supports to 120Hz, FreeSync Premium and HDR technology.
HDMI (1.4): 3840x1080 supports to 60Hz.
8
English
Connecting Your Monitor to a Computer
1. Make sure both the monitor and computer are powered-OFF.
2. Connect DP Cable (Only DP-input model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the DP cable to the computer.
3. Connect HDMI Cable (Only HDMI-input model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMI cable to the computer.
4. Plug the power cords of your computer and your monitor into a nearby electrical outlet.
Note: 1. The audio output function depends on models. Please refer to User's Guide
for more information.
2. DP (1.2): 3840x1080 supports up to 120Hz in normal mode.
HDMI (2.0): 3840x1080, supports up to 120Hz.
HDMI (1.4): 3840x1080, supports up to 60Hz.
HDMI
HDMI
AC
Power
Cord
DP Cable
HDMI Cable
AC IN AUDIOHDMI1
(HDMI1.4)
HDMI2
(HDMI2.0)
DP
(DP1.2)
9
English
External Controls
FreeSync Premium (HDMI2/DP Only):
It can allow a FreeSync Premium supported graphics source to dynamically adjust
display refresh rate based on typical content frame rates for power efficient,
virtually stutter free and low-latency display.
No. Icon Item Description
1 / Input button / Exit
a. Press to trigger Mode control.
b. When the OSD menu is enabled,
press to exit the current menu and
go back one level.
2 / Mode / Enter
a. Press the key to open the Brightness
control.
b. When the OSD menu is enabled,
press to enter to next level.
3 / Brightnes / +
a. Press to toggle input sources.
b. When the OSD menu is enabled,
press to select or return to the
previous menu.
4 / OSD functions / -
a. Press to view the OSD.
b. When the OSD menu is enabled,
press to select or go to the next
menu.
5 POWER Power button
Turns the monitor on/off. Blue indicates
power on.
Blinking Blue indicates standby mode.
12 3 4 5
10
English
Using the Shortcut Menu
The following content is for general reference only. Actual product specifications may vary.
The OSD (On Screen Display) can be used to adjust the settings of your LCD monitor. Press
the key to open the OSD. You can use the OSD to adjust the picture quality, OSD position
and general settings. For advanced settings, please refer to following page:
Main page
A. Input
B. Hot Key1: Brightness, Volume, Gamma, Contrast, Blue Light, Over Drive, PIP/PBP, VRB
C. Hot Key2: Brightness, Volume, Gamma, Contrast, Blue Light, Over Drive, PIP/PBP, VRB
D. Main Menu
Input
Open the Input control and select DP or HDMI input source. When you are done, use to
go back one level.
Hot key1 (default: Mode)
To choose scenario mode (G1, G2, G3) which user-defined profile to use or scenario mode
(User, Standard, ECO, Graphics, HDR).
ABCD
11
English
Hot key2 (default: Brightness)
Open the Brightness control and select the brightness setting. When you are done, use to
go back one level.
12
English
Main Menu
The Function page
Open the Function page to select a menu function, and adjust the settings which you want
using the arrows. You can also view your monitor’s system information from this page. When
you are done, use to go back one level.
1. Press the Main Menu key to open the OSD.
2. Use direction key to the up or down to select Picture from the OSD. Then press Enter to
go into the element you wish to adjust.
3. Use direction key to the left or right to adjust the sliding scales.
Picture
1. Press the MENU key to bring up the OSD.
2. Using the button, select Picture from the OSD. Then navigate to the setting you
wish to change.
3. Use the keys to adjust the sliding scales.
4. Open the Picture page to adjust Brightness, Contrast, Black boost, Blue Light, ACM, HDR
and Super Sharpness.
5. Brightness: Adjust the brightness from 0 to 100.
Note: Adjusts the balance between light and dark shades.
6. Contrast: adjust the contrast from 0 to 100.
Note: Sets the degree of difference between light and dark areas.
7. Black Boost: This boosts the amplitude of the dark color levels of the display– blacks will
be less black. The higher the level, the higher the boost.
Note: If the image is too bright or has few shadowed areas, to adjust this setting
will not cause any significant changes to the image.
Mode - Standard
50
50
Off
Off
Color
Gaming
OSD
Brightness
Contrast
Blue Light
ACM
Picture
5Black Boost
System
Super Sharpness
HDR
Off
Information
Audio
Ř
!Ř
0
Ř
Ř
/
13
English
8. Blue Light: filter out blue light by adjusting different Blue Light showing ratio - 80%, 70%,
60%, 50%.
Note: Higher values allow more blue light through. For the best protection,
select a lower value.
9. ACM: Turn ACM on or off. The default is off.
10. HDR: Can control (off / Auto) the default is off, set to auto will automatically detect and
deal with HDR signal.
Color
1. Press the MENU key to open the OSD.
2. Using the button, select Color from the OSD. Then navigate to the setting you
wish to adjust.
3. Use the button to select the setting.
Note: 1. When HDR = Auto, the Modes will also be automatically set to “HDR”.
2. When HDR = Auto, some parameters: (ACM, Gamma, Contrast, Blue Light,
Black Boost…) functions is gray out and disable, and if you change other
adjustable parameters, the “Modes” will not jump to “User” Mode.
Mode - Standard
50
2 2.
Warm
Gamma
Color Temp
GGain
B Gain
RGain
G Bias
R Bias
B Bias
50
50
50
50
50
Color
Gaming
OSD
Picture
System
Information
Audio
Mode - Standard
Standard
Modes
Color Space
6-
axis
Hue
6-
axis
Saturate
Gr
ayscale
Mode
Color
Gaming
OSD
Picture
System
Information
Audio Off
Ř
!Ř
0
Ř
Ř
/
14
English
4. Gamma mode allows you to adjust the luminance tone. The default value is 2.2 (standard
value for Windows).
5. Color temperature: Default is warm. You can choose Normal, User, Bluelight, Cool and
Warm.
6. Modes: Select your preferred mode from Action, Racing, Sports, User, Standard, ECO,
Graphics and HDR.
7. Color Space: You can choose Standard, SMPTE-C, DCI, EBU, HDR, Rec.709 or sRGB.
8. Grayscale Mode: Turn grayscale mode On or Off. The default is off.
9. 6-axis Hue: Adjust the red, green, blue, yellow, magenta and cyan hue.
10. 6-axis Saturate: Adjust the red, green, blue, yellow, magenta and cyan saturation.
Audio
1. Press the MENU key to open the OSD.
2. Using the button, select Audio from the OSD. Then navigate to the setting you
wish to adjust.
3. Use the button to select the setting.
4. Volume: Adjusts the volume.
5. Mute: Select On or Off.
Note: 1. If Color Space is "HDR", then Modes is set to "HDR" automatically.
2. If Color Space not "HDR", then Modes is set to "Standard".
Mode - Standard
Off
Volume
Mute
Color
Gaming
OSD
Picture
System
Information
Audio
50
Ř
!Ř
0
Ř
Ř
/
15
English
Gaming
1. Press the MENU key to open the OSD.
2. Using the button, select Gaming from the OSD. Then navigate to the setting you
wish to adjust.
3. Use the button to select the setting.
4. Over Drive: Select Off, Normal, or Extreme.
5. FreeSync Premium: Default is On, can choose Off.
Note: 1. If FreeSync Premium is "On" , then the Over Drive selection is set to
"Normal" automatically.
2. If FreeSync Premium is "OFF", then the user can set Over Drive to either
one of the three settings including: (a) Extreme (b) Normal (c) Off.
3. DP and HDMI2 support "FreeSync Premium ".
4. If FreeSync Premium is set to "On", please note that the screen might flicker
during use.
5. The following situations may happen when playing games with FreeSync
Premium enabled:
• Depending on the type of graphic cards, the game settings, and the video
you are playing, a flickering screen may occur. Please try to set current
FreeSync Premium mode to "Off ", or visit the official AMD website to
update the graphic card’s driver.
• When using FreeSync Premium , the screen may flicker due to different
output frequencies of the graphics card.
• When FreeSync Premium is set to "On " , changing the resolution may
result in screen-tearing. It is recommended to set FreeSync Premium to
"Off" and then change the resolution.
Mode - Standard
Normal
On
Over Drive
FreeSync Premium
AimPoint Off
Color
Gaming
OSD
Picture
System
Information
Audio
OffRefresh Rate Num
VRB
Off
Ř
!Ř
0
Ř
Ř
/
16
English
6. VRB: To choose whether to support dynamic picture more clean control, default is Off.
7. Refresh Rate Num: Display the panel’s current refresh rate on the screen.
Note: If FreeSync Premium set "On" you can see the V Frequency to changes in the
OSD.
8. Aim Point: Show an Aim point on the screen for shooting games.
Note: Aim Point is not supported in PBP mode.
OSD
1. Press the MENU key to open the OSD.
2. Using the button, select System from the OSD. Then navigate to the setting you
wish to adjust.
3. Use the button to select the setting.
4. Language: Set the OSD menu language.
5. OSD Timeout: Adjust the delay before turning the off the OSD menu.
6. Transparency: Select the transparency when using gaming mode. The transparency can
be 20%, 40%, 60%, 80%, or Off.
Note: 1. It is not support VRB when HDR set to "On" or "Auto".
2. VRB function does not affect the (Logo, Aim Point, Message and Input Icon)
brightness.
3. When turn on FreeSync Premium , will set VRB to "Off" automatically.
4. When to adjust Brightness, Blue Light and ACM, will set VRB to "Off"
automatically.
5. When detect input timing lower than 75Hz, will set VRB to "Off"
automatically and grey out to disable.
6. Due to the IC control dynamic picture to be clear when switch on VRB
function, the overall brightness will become dark, and the brightness of
"Extreme" will be darker than "Normal".
Mode - Standard
English
Off
Language
OSD Timeout
Transparency
OffOSD Lock
10
Color
Gaming
OSD
Picture
System
Information
Audio
Ř
!Ř
0
Ř
Ř
/
17
English
7. OSD Lock: OSD Lock function is used to prevent OSD button from being pressed
accidentally.
System
1. System menu can be used to select signal input sources and other important settings,
including input types and PIP/PBP features.
2. Press the MENU key to open the OSD.
3. Using the button, select OSD from the OSD. Then navigate to the setting you
wish to adjust.
4. Use the button to select the setting.
5. Input: Select the source from DP or HDMI input source. The options are HDMI1 (1.4),
HDMI2 (2.0), and DP (1.2).
Note: 1. OSD Locked:
Set the OSD Lock to "On" from the OSD and press "Enter".
The "OSD Locked" message will appear in the middle of the screen, and
LED lights will indicate as blinking blue.
When pressing any key, "OSD Locked" message will be prompted.
2. OSD Unlocked:
Press the second OSD key continuously for 3 seconds to unlock OSD. The
"OSD Unlocked" message will appear in the middle of the screen, and LED
lights will turn into blue.
Mode - Standard
Color
Gaming
OSD
Input DP (1. )
On
FULL
On
Auto Source
Wide Mode
Hot Key Assignment
DDC/CI
Picture
Information
PIP/PBP
System
Audio
Lighting
Mode - Standard
Color
Gaming
OSD
lamroNleveL kcalB IMDH
Picture
Information
System
Off
Quick Start Mode
Audio
Ř
!Ř
0
Ř
Ř
/
18
English
6. Auto Source: Automatically searches for available input sources.
7. Wide Mode: You can select which screen aspect you are using. The options are Aspect,
1:1, 21:9 and Full.
8. Lighting: Choose a favorite from functions.
Lighting Switch: Lighting main switch ,default is "On".
Lighting Style: 4 kinds of style choice: Static(Default), Flashing, Breathing ,Marquee.
Lighting on in Sleep: Decide whether to light in power saving mode, the default is "off".
Lighting Color: 7 kinds of lighting color: Red,Green,Blue(Default),White,Yellow,
Purple,Cyan.
9. PIP/PBP: The options for PIP/PBP Mode are Off, PIP Large, PIP Small, and PBP. You can
also adjust the PIP Position, Sub Source, Source Swap, and Audio Source.
Note: PIP/PBP is not supported while FreeSync Premium is "On"
10. Hot Key Assignment: Select the function of Hot Key 1 or Hot Key 2.
11. DDC/CI: Allows the monitor settings to be set through the software on the PC.
Note: DDC/CI, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
12. HDMI Black Level: You can select the level of blackness under HDMI source.
13. Quick Start Mode: Select Off or On. The default is "Off". Turn on to speed up boot speed.
Product information
1. Press the MENU key to open the OSD.
2. Using the keys, select Information to view the basic information for your monitor
and current input.
3. Reset All Settings: Reset all settings to the factory defaults.
Mode - Standard
Color
Gaming
OSD
System
Main Source
DP (1.2)
Resoiution
1920x1080
Picture
H/V Frequency
H: 67KHz V: 60Hz
Mode
SDR
Series Number
Reset All Settings
Information
Ř
!Ř
0
19
English
Save Setting to...(User mode only)
1. Press the MENU key to open the OSD.
2. Using the button, select “Save Setting to...” from the OSD. Then select the
preferred mode.
3. Save Setting to Game mode: There are three user-defined profiles available (Action,
Racing and Sports). Save your customized settings to the Game mode in order to
implement those settings automatically when you select it afterwards.
Mode - U
ser
Color
Gaming
OSD
System
Game Mode: Action
Game Mode: Racing
Game Mode: Sports
Picture
Information
Save Settings to...
Ř
!Ř
0
20
English
TROUBLESHOOTING
Before sending your LCD monitor for servicing, please check the troubleshooting list below to
see if you can self-diagnose the problem.
HDMI/DP Mode (Optional)
Problems Current Status Remedy
No Picture Blue Using OSD, adjust brightness and
contrast to maximum or reset to their
default settings.
Blinking Blue Check if signal cable is properly
connected, which can be determined
by plugging and unplugging the cable.
Check if the PC is functioning properly
or in the Hibernate mode. To wake the
PC from Sleep mode, you can click
the mouse or tap any key on the
keyboard.
LED OFF Check the power switch.
Check if AC power cord is properly
connected to the monitor.
Product Information for EU Energy Label