Table of Contents
ACT AC7770 User Manual
Displayed below is the user manual for AC7770 by ACT which is a product in the AV Extenders category. This manual has pages.
Related Manuals
AC7770
4K DisplayPort v1.2 extender set
2 | ENGLISH
AC7770 DisplayPort v1.2 extender set
Table of contents
1.0 Introduction ........................................................................................................... 2
1.1 Packing contents ............................................................................................... 2
1.2 Features ............................................................................................................ 2
2.0 Panel descriptions ................................................................................................. 3
3.0 Installation diagram: .............................................................................................. 4
4.0 Technical specifications ......................................................................................... 4
4.1 Transmission range over CAT: .......................................................................... 5
5.0 Service and support ............................................................................................... 5
6.0 Warning and points of attention ............................................................................. 5
7.0 Warranty conditions ............................................................................................... 6
1.0 Introduction
Congratulations with the purchase of this high-quality ACT product! This product
has undergone extensive testing by ACT’s technical experts. Should you
experience any problems with this product, you are covered by ACT
warranty. Please keep this manual and the receipt in a safe place.
Register your product now on www.act-connectivity.com and receive product updates!
1.1 Packing contents
The following parts need to be present in the packing:
• 4K DisplayPort extender transmitter unit
• 4K DisplayPort extender receiver unit
• Power adapter: 2x 5.0V 2.0A
• Mounting kit: Screws, plugs and mounting tape
1.2 Features
• Extends 4K UHD DisplayPort signal over one CAT6a cable.
• Support resolution up to 1080P@60hz, 4K@30hz 4:4:4.
• HDCP compliant.
• Audio support up to LPCM 2.0.
• Transmission range up to 70m via single CAT6a cable.
1080P @ 60Hz = 70m / 4K @ 30Hz = 40m
• Plug and play
3 | ENGLISH
2.0 Panel descriptions
Front Panel Transmitter and receiver unit
RJ45
CAT6a
Back panel Transmitter and receiver unit
Link
Green LED = Power on/off
Link
Blue LED = TX/RX linked. Flashing = Low power mode
Power
DC 5.0V 2.0A
4 | ENGLISH
3.0 Installation diagram:
Point to Point application
4.0 Technical specifications
Connections
RJ45, DisplayPort
Connections (in)
RJ45, DisplayPort (full-size)
female (x1)
Connections (out)
RJ45, DisplayPort (full-size)
female (x1)
Max. extension distance
70m
Data transmission
Zero latency, Real time
transmission
Extension cable
CAT6a
Video signal
DisplayPort
DisplayPort specification
DisplayPort 1.2
Max. resolution @ 60Hz
1920 x 1080
Max. resolution @ 30Hz
3840 x 2160 4:4:4
Video support
HDCP
Audio support
LPCM 2.0ch Stereo
Power supply x 2 included
Input: 100-240V~50/60Hz 0,5A
Output: 5.0V 2.0A
Including mounting kit
Screws, plugs, mounting tape
Dimensions in mm ( W x H x D )
92 x 25 x 69mm
Weight in grams
340g ( Transmitter + Receiver )
5 | ENGLISH
4.1 Transmission range over CAT:
CAT5e / CAT6
60M
1080p @ 60Hz
CAT6a
70M
CAT5e / CAT6
35M
1080p @ 60Hz 16bit
2160 @ 30Hz 4:4:4
CAT6a
40M
5.0 Service and support
This user manual has been carefully written by ACT’s technical experts. If you have
problems installing or using the product, please fill out the support form at the website
https://support.act-connectivity.com/
6.0 Warning and points of attention
Due to laws, directives and regulations set out by the European parliament, some
(wireless) devices could be subject to limitations concerning its use in certain
European member states. In certain European member states the use of such devices
could be prohibited. Contact your (local) government for more information about this
limitations.
Always follow up the instructions in the manual*, especially where it concerns devices
which need to be assembled.
Warning: In most cases this concerns an electronic device. Wrong/improper use may
lead to (severe) injuries!
When you connect the device to the mains, make sure it will not be damaged or
subject to (high) pressure.
A power socket is needed which should be close and easy accessible from the device.
Repairing of the device should be done by qualified ACT staff. Never try to repair the
device yourself. The warranty immediately voids when products have undergone self-
repair and/or by misuse.
6 | ENGLISH
Dispose of the device appropriately. Please follow your countries regulation for the
disposal of electronic goods.
Please check below safety points carefully:
- Do not apply external force on the cables
- Do not unplug the device by pulling the power cable
- Do not place the device near heating elements
- Do not let the device come in contact with water of other liquids
- If there is any strange sound, smoke or odor, remove the device immediately from
the power outlet.
- Do not put any sharp objects into the venting hole of a product
- Do not use any damaged cables (risk of electric shock)
- Keep the product out of reach of children
- Wipe off the product with soft fabric, not water mop.
- Keep the power plug and outlet clean
- Do not unplug the device form the power outlet with wet hands
- Unplug the device when you don’t use it for a long time
- Use the device at a well ventilated place
*Tip: ACT manuals are written with great care. However, due to new technological
developments it can happen that a printed manual does not longer contain the most
recent information. If you are experiencing any problems with the printed manual or
you cannot find what you are looking for, please always check our website www.act-
connectivity.com first for the newest updated manual.
7.0 Warranty conditions
The ACT warranty applies to all ACT products. After buying a second-hand ACT
product the remaining period of warranty is measured from the moment of purchase
by the product’s initial owner. ACT warranty applies to all ACT products and parts,
indissolubly connected or mounted to the product it concerns. Power supply adapters,
batteries, antennas and all other products not directly integrated in or connected to the
main product or products of which, without reasonable doubt, can be assumed that
wear and tear during use will show a different pattern than the main product, are not
covered by the ACT warranty. Products are not covered by the ACT warranty when
exposed to incorrect/improper use, external influences or when opening the service
parts of the product by parties other than ACT. ACT may use refurbished materials for
repair or replacement of your defective product. ACT cannot be held responsible for
changes in network settings by internet providers. We cannot guarantee that the ACT
networking product will keep working when settings are changed by the internet
providers. ACT cannot guarantee the working of web services, apps and other third
party content that is available through ACT products
7 | ENGLISH
When my product gets defective
Should you encounter a product rendered defective for reasons other than described
above: Please contact your point of purchase for taking care of your defective product.
AC7770_EN | 07-2020