Table of Contents
ACT AC7800 User Manual
Displayed below is the user manual for AC7800 by ACT which is a product in the AV Extenders category. This manual has pages.
Related Manuals
AC7800
HDMI extender set via UTP Cables
2
|
ENGL
ISH
AC7800 HDMI extender set via UTP Cables
Table of contents
1.0 Introduction ........................................................................................................... 2
1.1 Packing contents ............................................................................................... 2
2.0 Panel Descriptions ................................................................................................. 3
3.0 Installation instructions .......................................................................................... 4
3.1 EDID.................................................................................................................. 4
4.0 Frequently Asked Questions and other related information .................................... 5
5.0 Service and support ............................................................................................... 5
6.0 Warning and points of attention ............................................................................. 5
7.0 Warranty conditions ............................................................................................... 7
1.0 Introduction
Congratulations with the purchase of this high-quality ACT product! This product
has undergone extensive testing by ACT’s technical experts. Should you
experience any problems with this product, you are covered by ACT
warranty. Please keep this manual and the receipt in a safe place.
Register your product now on www.act-connectivity.com and receive product updates!
1.1 Packing contents
• HDMI receiver
• HDMI transmitter
• 2x Power supply DC 5V 1A
3
|
ENGL
ISH
2.0 Panel Descriptions
Transmitter Panel
1. DC5V Power
2. Cat RJ45 output port
3. HDMI input ( Source )
4. Connection indicator
5. EDID
Receiver Panel
1. DC5V Power.
2. Cat5e/6 RJ45 input port
3. HDMI output ( Display )
4. Connection indicator.
5. Power indicator.
4
|
ENGL
ISH
3.0 Installation instructions
Because of the built-in EDID protocol, you need to make sure that all connected
devices are powered before the HDMI extender is switched on.
1. Connect the HDMI input source ( such as Media player, BD/DVD player etc.) to
the transmitter unit using a HDMI cable.
2. Connect the Cat5e/6 output of the transmitter to the Cat5e/6 input of the receiver
using a CAT5E or CAT6 cable with a maximum length of 50m.
3. Connect the HDMI display device (such as HDTV) to the HDMI output port.
4. Connect the DC side from one power adapter in to the transmitter unit and one
power adapter into receiver unit and connect the AC side of both the power supply
into the wall outlet.
Installation example.
3.1 EDID
EDID can read the “Extended Display Identification Data” information from the
connected display devices. EDID is a data structure provided by digital displays to
describe its capabilities to a video source. It enables a personal computer to know
what kind of monitor is connected to it and thus the capabilities of the identified
monitor.
5
|
ENGL
ISH
4.0 Frequently Asked Questions and other
related information
The latest Frequently asked questions for your product can be found on the support
page of your product. ACT will update these pages frequently to assure you have the
most recent information. Visit www.act-connectivity.com for more information about
your product.
5.0 Service and support
This user manual has been carefully written by ACT’s technical experts. If you have
problems installing or using the product, please check the support link at the website
www.act-connectivity.com.
6.0 Warning and points of attention
Due to laws, directives and regulations set out by the European parliament, some
(wireless) devices could be subject to limitations concerning its use in certain
European member states. In certain European member states the use of such devices
could be prohibited. Contact your (local) government for more information about this
limitations.
Always follow up the instructions in the manual*, especially where it concerns devices
which need to be assembled.
Warning: In most cases this concerns an electronic device. Wrong/improper use may
lead to (severe) injuries!
When you connect the device to the mains, make sure it will not be damaged or
subject to (high) pressure.
A power socket is needed which should be close and easy accessible from the device.
Repairing of the device should be done by qualified ACT staff. Never try to repair the
device yourself. The warranty immediately voids when products have undergone self-
repair and/or by misuse. For extended warranty conditions, please visit our website at
www.act-connectivity.com
Dispose of the device appropriately. Please follow your countries regulation for the
disposal of electronic goods.
Please check below safety points carefully:
- Do not apply external force on the cables
- Do not unplug the device by pulling the power cable
6
|
ENGL
ISH
- Do not place the device near heating elements
- Do not let the device come in contact with water of other liquids
- If there is any strange sound, smoke or odor, remove the device immediately from
the power outlet.
- Do not put any sharp objects into the venting hole of a product
- Do not use any damaged cables (risk of electric shock)
- Keep the product out of reach of children
- Wipe off the product with soft fabric, not water mop.
- Keep the power plug and outlet clean
- Do not unplug the device form the power outlet with wet hands
- Unplug the device when you don’t use it for a long time
- Use the device at a well ventilated place
*Tip: ACT manuals are written with great care. However, due to new technological
developments it can happen that a printed manual does not longer contain the most
recent information. If you are experiencing any problems with the printed manual or
you cannot find what you are looking for, please always check our website www.act-
connectivity.com first for the newest updated manual.
Frequently asked questions (FAQ). Consult support on our website www.act-
connectivity.com and see if you can find the right information about your product here.
It is highly advisable to consult the FAQ section first, the answer is often here.
7
|
ENGL
ISH
7.0 Warranty conditions
The ACT warranty applies to all ACT products. After buying a second-hand ACT
product the remaining period of warranty is measured from the moment of purchase
by the product’s initial owner. ACT warranty applies to all ACT products and parts,
indissolubly connected or mounted to the product it concerns. Power supply adapters,
batteries, antennas and all other products not directly integrated in or connected to the
main product or products of which, without reasonable doubt, can be assumed that
wear and tear during use will show a different pattern than the main product, are not
covered by the ACT warranty. Products are not covered by the ACT warranty when
exposed to incorrect/improper use, external influences or when opening the service
parts of the product by parties other than ACT. ACT may use refurbished materials for
repair or replacement of your defective product. ACT cannot be held responsible for
changes in network settings by internet providers. We cannot guarantee that the ACT
networking product will keep working when settings are changed by the internet
providers. ACT cannot guarantee the working of web services, apps and other third
party content that is available through ACT products
When my product gets defective
Should you encounter a product rendered defective for reasons other than described
above: Please contact your point of purchase for taking care of your defective product.
AC7800 | 01-2020