Table of Contents
ACT AC7871 User Manual
Displayed below is the user manual for AC7871 by ACT which is a product in the AV Extenders category. This manual has pages.
Related Manuals
AC7871
4K HDMI chainable receiver
2 | ENGLISH
AC7871 4K chainable receiver
Table of contents
1.0 Introduction ........................................................................................................... 2
1.1 Packing contents ............................................................................................... 2
1.2 Features ............................................................................................................ 2
2.0 Panel descriptions ................................................................................................. 3
3.0 Installation diagram: .............................................................................................. 4
4.0 Technical specifications ......................................................................................... 4
5.0 Service and support ............................................................................................... 5
6.0 Warning and points of attention ............................................................................. 5
7.0 Warranty conditions ............................................................................................... 6
1.0 Introduction
Congratulations with the purchase of this high-quality ACT product! This product
has undergone extensive testing by ACT’s technical experts. Should you
experience any problems with this product, you are covered by ACT
warranty. Please keep this manual and the receipt in a safe place.
Register your product now on www.act-connectivity.com and receive product updates!
1.1 Packing contents
The following parts need to be present in the packing:
• 4K HDMI chainable receiver unit
• Power adapter: 1x 5.0V 2.0A
• Mounting kit: Screws, plugs and mounting tape
1.2 Features
• Extends 4K UHD HDMI signal over one CAT5e cable.
• Support resolution up to 1080P@60hz, 4K@30hz 4:4:4.
• HDCP 1.4 compliant.
• Audio support up to LPCM 2.0.
• Transmission range up to 100M over CAT5e.
• Chainable up to 250 displays, with a max distance of 2.5KM max.
• Plug and play
3 | ENGLISH
2.0 Panel descriptions
Front Panel receiver unit
EDID
Function
Press and hold 2
seconds
Copy receiver monitor EDID to transmitter.
RJ45
Green LED = CAT5e linked
RJ45
Yellow LED = Data transmission
Back panel receiver unit
Link
Green LED = Power on/off
Link
Blue LED = TX/RX linked
Power
DC 5.0V 2.0A
4 | ENGLISH
3.0 Installation diagram:
Please note that the ( chainable ) receiver unit cannot work standalone and always
need the transmitter unit. ( AC7870 extender kit sold separately )
One to Multiple Display application by daisy chain ( AC7870 extender kit sold
separately)
4.0 Technical specifications
Connections
RJ45, HDMI
Connections (out) RJ45
RJ45 (x3)
Connections (out) HDMI
HDMI A (full-size) female (x1)
Max. extension distance
100m
Data Transmission
Zero latency, Real time
transmission
Extension over
CATx
Extension cable
CAT5e
Video signal
HDMI
HDMI specification
HDMI High Speed
Max. resolution @ 60Hz
1920 x 1080
Max. resolution @ 30Hz
3840 x 2160 4:4:4
Video support
HDCP 1.4, EDID
Audio support
LPCM 2.0ch Stereo
Power supply
Input: 100-240V~50/60Hz 0,5A
Output: 5.0V 2.0A
Including mounting kit
Screws, plugs, mounting tape
Dimensions in mm ( W x H x D )
88 x 145 x 30
Weight in grams
300
5 | ENGLISH
5.0 Service and support
This user manual has been carefully written by ACT’s technical experts. If you have
problems installing or using the product, please fill out the support form at the website
https://support.act-connectivity.com/
6.0 Warning and points of attention
Due to laws, directives and regulations set out by the European parliament, some
(wireless) devices could be subject to limitations concerning its use in certain
European member states. In certain European member states the use of such devices
could be prohibited. Contact your (local) government for more information about this
limitations.
Always follow up the instructions in the manual*, especially where it concerns devices
which need to be assembled.
Warning: In most cases this concerns an electronic device. Wrong/improper use may
lead to (severe) injuries!
When you connect the device to the mains, make sure it will not be damaged or
subject to (high) pressure.
A power socket is needed which should be close and easy accessible from the device.
Repairing of the device should be done by qualified ACT staff. Never try to repair the
device yourself. The warranty immediately voids when products have undergone self-
repair and/or by misuse.
Dispose of the device appropriately. Please follow your countries regulation for the
disposal of electronic goods.
Please check below safety points carefully:
- Do not apply external force on the cables
- Do not unplug the device by pulling the power cable
- Do not place the device near heating elements
- Do not let the device come in contact with water of other liquids
- If there is any strange sound, smoke or odor, remove the device immediately from
the power outlet.
- Do not put any sharp objects into the venting hole of a product
- Do not use any damaged cables (risk of electric shock)
- Keep the product out of reach of children
- Wipe off the product with soft fabric, not water mop.
- Keep the power plug and outlet clean
6 | ENGLISH
- Do not unplug the device form the power outlet with wet hands
- Unplug the device when you don’t use it for a long time
- Use the device at a well ventilated place
*Tip: ACT manuals are written with great care. However, due to new technological
developments it can happen that a printed manual does not longer contain the most
recent information. If you are experiencing any problems with the printed manual or
you cannot find what you are looking for, please always check our website www.act-
connectivity.com first for the newest updated manual.
7.0 Warranty conditions
The ACT warranty applies to all ACT products. After buying a second-hand ACT
product the remaining period of warranty is measured from the moment of purchase
by the product’s initial owner. ACT warranty applies to all ACT products and parts,
indissolubly connected or mounted to the product it concerns. Power supply adapters,
batteries, antennas and all other products not directly integrated in or connected to the
main product or products of which, without reasonable doubt, can be assumed that
wear and tear during use will show a different pattern than the main product, are not
covered by the ACT warranty. Products are not covered by the ACT warranty when
exposed to incorrect/improper use, external influences or when opening the service
parts of the product by parties other than ACT. ACT may use refurbished materials for
repair or replacement of your defective product. ACT cannot be held responsible for
changes in network settings by internet providers. We cannot guarantee that the ACT
networking product will keep working when settings are changed by the internet
providers. ACT cannot guarantee the working of web services, apps and other third
party content that is available through ACT products
When my product gets defective
Should you encounter a product rendered defective for reasons other than described
above: Please contact your point of purchase for taking care of your defective product.
AC7871_EN | 07-2020