Table of Contents
AOC 24B2XDA User Manual
Displayed below is the user manual for 24B2XDA by AOC which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
1
www.aoc.com
©2020 AOC. All Rights Reserved.
LCD Monitor
User Manual
24B2XD/24B2XDA/27B2DA
i
Safety ................................................................................................................................................................................... 1
National Conventions ................................................................................................................................................ 1
Power ........................................................................................................................................................................ 2
Installation ................................................................................................................................................................. 3
Cleaning .................................................................................................................................................................... 4
Other ......................................................................................................................................................................... 5
Setup .................................................................................................................................................................................... 6
Contents in Box ......................................................................................................................................................... 6
Setup Stand & Base .................................................................................................................................................. 7
Adjusting Viewing Angle ............................................................................................................................................ 8
Connecting the Monitor ............................................................................................................................................. 9
Wall Mounting.......................................................................................................................................................... 10
Adaptive-Sync function ............................................................................................................................................11
Adjusting ............................................................................................................................................................................. 12
Hotkeys ................................................................................................................................................................... 12
OSD Setting ............................................................................................................................................................ 14
Luminance ................................................................................................................................................... 15
Image Setup ................................................................................................................................................ 16
Color Setup .................................................................................................................................................. 17
Picture Boost ............................................................................................................................................... 18
OSD Setup ................................................................................................................................................... 19
Game Setting ............................................................................................................................................... 20
Extra ............................................................................................................................................................ 21
Exit ............................................................................................................................................................... 22
LED Indicator .......................................................................................................................................................... 23
Troubleshoot ....................................................................................................................................................................... 24
Specication ....................................................................................................................................................................... 25
General Specication .............................................................................................................................................. 25
Preset Display Modes ............................................................................................................................................. 28
Pin Assignments ...................................................................................................................................................... 30
Plug and Play .......................................................................................................................................................... 32
1
Safety
National Conventions
The following subsections describe notational conventions used in this document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These
blocks are notes, cautions, and warnings, and they are used as follows:
NOTE: A NOTE indicates important information that helps you make better use of your computer system.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings
may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specic presentation of the
warning is mandated by regulatory authority.
2
Power
The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the
type of power supplied to your home, consult your dealer or local power company.
Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the
monitor from damage due to power surges.
Do not overload power strips and extension cords. Overloading can result in re or electric shock.
To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate congured
receptacles marked between 100-240V AC, Min. 5A.
The wall socket shall be installed near the equipment and shall be easily accessible.
For use only with the attached power adapter (Only for monitors with power adapter).
Manufacturers:TPV ELECTRONICS(FUJIAN) CO., LTD
Model: ADPC1925EX(19VDC,1.31A)
3
Installation
Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a
person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by
the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and use
mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.
Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a re or electric
shock. Never spill liquids on the monitor.
Do not place the front of the product on the oor.
If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit
instructions.
Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence
overheating may cause a re or damage to the monitor.
See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on the
stand:
4
Cleaning
Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent
which will cauterize the product cabinet.
When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it
will scratch the screen surface.
Please disconnect the power cord before cleaning the product.
5
Other
If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a
Service Center.
Make sure that the ventilating openings are not blocked by a table or curtain.
Do not engage the LCD monitor in severe vibration or high impact conditions during operation.
Do not knock or drop the monitor during operation or transportation.
IThe power cords shall be safety approved. For Germany, it shall be H03VV-F, 3G, 0.75 mm2, or better. For other
countries, the suitable types shall be used accordingly.
IExcessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of the equalizer to
maximum increases the earphones and headphones output voltage and therefore the sound pressure level.
6
Setup
Contents in Box
*
*
CD Manual Warranty card
Monitor
Base
**
*
Power Cable Adapter HDMI Cable DVI Cable VGA Cable Audio Cable
*
Not all signal cables will be provided for all countries and regions. Please check with the local dealer or AOC branch
oce for conrmation.
7
Setup Stand & Base
Please setup or remove the base following the steps as below.
Setup:
24B2XD 24B2XDA/27B2DA
Remove:
2
1
4
3
2
1
4
3
24B2XD 24B2XDA/27B2DA
8
Adjusting Viewing Angle
For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own
preference.
Hold the stand so you will not topple the monitor when you change the monitor’s angle.
You are able to adjust the monitor as below:
NOTE:
Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.
9
Connecting the Monitor
Cable Connections In Back of Monitor and Computer:
3
2
6
3
2
6
5
14
24B2XD 24B2XDA/27B2DA
1. HDMI
2. DVI
3. Analog (D-Sub 15-Pin VGA cable)
4. Audio in
5. Earphone
6. Power
Connect to PC
1. Connect the power cord to the back of the display rmly.
2. Turn o your computer and unplug its power cable.
3. Connect the display signal cable to the video connector on the back of your computer.
4. Plug the power cord of your computer and your display into a nearby outlet.
5. Turn on your computer and display.
If your monitor displays an image, installation is complete. If it does not display an image, please refer Troubleshooting.
To protect equipment, always turn o the PC and LCD monitor before connecting.
10
Wall Mounting
Preparing to Install An Optional Wall Mounting Arm.
2
1
4
3
This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this procedure.
Follow these steps:
1. Remove the base.
2. Follow the manufacturer’s instructions to assemble the wall mounting arm.
3. Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the back of the
monitor.
4. Insert the 4 screws into the holes and tighten.
5. Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for instructions on
attaching it to the wall.
Noted: VESA mounting screw holes are not available for all models, please check with the dealer or ocial department of
AOC.
11
Adaptive-Sync function
1. Adaptive-Sync function is working with DP/HDMI
2. Compatible Graphics Card: Recommend list is as the below, also could be checked by visiting www.AMD.com
• Radeon™ RX Vega series
• Radeon™ RX 500 series
• Radeon™ RX 400 series
• Radeon™ R9/R7 300 series （R9 370/X, R7 370/X, R7 265 except）
• Radeon™ Pro Duo (2016)
• Radeon™ R9 Nano series
• Radeon™ R9 Fury series
• Radeon™ R9/R7 200 series (R9 270/X, R9 280/X except)
12
Adjusting
Hotkeys
1 Source/Auto/Exit
2 Clear Vision/<
3Volume/Image ratio/>
4 Menu/Enter
5 Power
Menu/Enter
When there is no OSD, Press to display the OSD or conrm the selection.
Power
Press the Power button to turn on the monitor.
Volume/Image ratio
When there is no OSD, Press > Volume button to active volume adjustment bar, Press < or > to adjust volume.
When there is no OSD, Press > hotkey to active image ratio , Press < or > to adjust 4:3 or wide. (If the product screen
size is 4:3 or input signal resolution is wide format, the hot key is disable to adjust).
Source/Auto/Exit
When the OSD is closed, press Source/Auto/Exit button will be Source hot key function.
When the OSD is closed, press Source/Auto/Exit button continuously about 2 second to do auto congure (Only for the
models with D-Sub).
13
Clear Vision
1. When there is no OSD, Press the “ <” button to activate Clear Vision.
2. Use the “ > ” or “>” buttons to select between weak, medium, strong, or o settings. Default setting is always “o”.
3. Press and hold “ <” button for 5 seconds to activate the Clear Vision Demo, and a message of “Clear Vision Demo: on”
will be display on the screen for a duration of 5 seconds. Press Menu or Exit button, the message will disappear. Press
and hold “ <” button for 5 seconds again, Clear Vision Demo will be o.
Clear Vision function provides the best image viewing experience by converting low resolution and blurry images into
clear and vivid images.
14
OSD Setting
Basic and simple instruction on the control keys.
Luminance Image Setup Color Setup Picture Boost OSD Setup Game Setting ExitExtra
Contrast 50
Brightness 90
Eco mode Standard
Gamma Gamma 1
DCR Off
HDR Mode Off
1). Press the MENU-button to activate the OSD window.
2). Press Left or Right to navigate through the functions. Once the desired function is highlighted, press the
MENU-button to activate it, press Left or Right to navigate through the sub-menu functions. Once the desired
function is highlighted, press MENU-button to activate it.
3). Press Left or to change the settings of the selected function. Press to exit. If you want to adjust any other
function, repeat steps 2-3.
4). OSD Lock Function: To lock the OSD, press and hold the MENU-button while the monitor is o and then press
power button to turn the monitor on. To un-lock the OSD - press and hold the MENU-button while the monitor is
o and then press power button to turn the monitor on.
Notes:
1). If the product has only one signal input, the item of “Input Select” is disable to adjust.
2). ECO modes (except Standard mode), DCR, DCB mode and Picture Boost, for these four states that only one state
can exist.
15
Luminance
Luminance Image Setup Color Setup Picture Boost OSD Setup Game Setting ExitExtra
Contrast 50
Brightness 90
Eco mode Standard
Gamma Gamma 1
DCR Off
HDR Mode Off
Contrast 0-100 Contrast from Digital-register.
Brightness 0-100 Backlight Adjustment.
Eco mode
Standard Standard Mode.
Text Text Mode.
Internet Internet Mode.
Game Game Mode.
Movie Movie Mode.
Sports Sports Mode.
Reading Reading Mode.
Gamma
Gamma1 Adjust to Gamma 1.
Gamma2 Adjust to Gamma 2.
Gamma3 Adjust to Gamma 3.
DCR
On Enable dynamic contrast ratio.
O Disable dynamic contrast ratio.
HDR Mode
O
Select HDR Mode.
HDR Picture
HDR Movie
HDR Game
Note:
When “HDR Mode” is set to “non-o”, the items “Contrast”, “ECO”, “Gamma” cannot be adjusted.
16
Image Setup
Color Setup Picture Boost OSD Setup ExitExtra
Image Setup
Clock 50
Phase 50
H. Position 50
V. Position 50
Sharpness 50
Luminance
Game Setting
Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise.
Phase 0-100 Adjust Picture Phase to reduce Horizontal-Line noise
Sharpness 0-100 Adjust picture sharpness
H. Position 0-100 Adjust the horizontal position of the picture.
V. Position 0-100 Adjust the vertical position of the picture.
17
Color Setup
Picture Boost OSD Setup ExitExtra
Luminance
Red 50
Green 50
Blue 50DCB Demo Off
Color Temp. Warm
DCB Mode Off
Color Setup Image Setup
Game Setting
Color Temp.
Warm Recall Warm Color Temperature from EEPROM.
Normal Recall Normal Color Temperature from EEPROM.
Cool Recall Cool Color Temperature from EEPROM.
sRGB Recall SRGB Color Temperature from EEPROM.
User Restore Color Temperature from EEPROM.
DCB Mode
Full Enhance Disable or Enable Full Enhance Mode
Nature Skin Disable or Enable Nature Skin Mode
Green Field Disable or Enable Green Field Mode
Sky-blue Disable or Enable Sky-blue Mode
AutoDetect Disable or Enable AutoDetect Mode
O Disable or Enable O Mode
DCB Demo On or O Disable or Enable Demo
Red 0-100 Red gain from Digital-register.
Green 0-100 Green gain from Digital-register.
Blue 0-100 Blue gain from Digital-register.
Note:
When “HDR Mode” under “Luminance” is set to “non-o”, all items under “Color Setup” cannot be adjusted.
18
Picture Boost
OSD Setup ExitExtra
Luminance Image Setup
Brightness 50
Contrast 50
H. Position 0
V. Position 0
Bright Frame off
Frame Size 14
Picture Boost Color Setup
Game Setting
Bright Frame on or o Disable or Enable Bright Frame
Frame Size 14-100 Adjust Frame Size
Brightness 0-100 Adjust Frame Brightness
Contrast 0-100 Adjust Frame Contrast
H. position 0-100 Adjust Frame horizontal Position
V. position 0-100 Adjust Frame vertical Position
Note:
Adjust the brightness, contrast, and position of the Bright Frame for better viewing experience.
When “HDR Mode” under “Luminance” is set to “non-o”, all items under “Picture Boost” cannot be adjusted.
19
OSD Setup
ExitExtra
Luminance Image Setup Color Setup
H. Position 50
V. Position 0
Transparence 25
Language English
Timeout 10 Break Reminder Off
OSD Setup Picture Boost
Game Setting
Language Select the OSD language
Timeout 5-120 Adjust the OSD Timeout
H. Position 0-100 Adjust the horizontal position of OSD
V. Position 0-100 Adjust the vertical position of OSD
Transparence 0-100 Adjust the transparence of OSD
Break Reminder on or o Break reminder if the user continuously work for more
than 1hrs
20
Game Setting
Picture Boost OSD SetupExitExtra
Luminance
Overdrive
LowBlue Mode
Dial Point
Shadow Control
Game Mode Off
OffOff
Off
Image Setup Color Setup
Game Setting
50
Game Color 10
Frame Counter Off
On
Adaptive-Sync
Game Mode
O No optimization by Smart image game
FPS For playing FPS (rst Person Shooters) games.
Improves dark theme black level details.
RTS For playing RTS (Real Time Strategy). Improves the
image quality.
Racing For playing Racing games, Provides fastest response
time and high color saturation.
Gamer 1 User’s preference settings saved as Gamer 1.
Gamer 2 User’s preference settings saved as Gamer 2.
Gamer 3 User’s preference settings saved as Gamer 3.
Shadow Control 0-100
Shadow Control Default is 50, then end-user can adjust
from 50 to 100 or 0 to increase contrast for clear picture.
1. If picture is too dark to be saw the detail clearly,
adjusting from 50 to100 for clear picture.
2. If picture is too white to be saw the detail clearly,
adjusting from 50 to0 for clear picture
Overdrive
O
Adjust the response time.
Weak
Medium
Strong
Game Color 0-20 Game Color will provide 0-20 level for adjusting
saturation to get better picture.
LowBlue Mode
Reading / Oce /
Internet / Multimedia /
O
Decrease blue light wave by controlling color
temperature.
Dial Point On or O
The“Dial Point”function places an aiming indicator in the
center of screen for helping gamers to play First Person
Shooter (FPS) games with an accurate and precise
aiming.
Adaptive-Sync
(24B2XDA/27B2DA) On or O
Disable or Enable Adaptive-Sync.c
Adaptive-Sync Run Reminder: When the Adaptive-Sync
feature is enabled, there may be ashing in some game
environments.
Frame Counter
(24B2XDA/27B2DA)
O / Right-up / Right-
Down / Left-Down /
Left-Up
Display V frequency on the corner selected
Note:
When “HDR Mode” under “Luminance” is set to “non-o”, the items “Game Mode”, “Shadow Control”, “Game Color”, “Low
Blue Mode” cannot be adjusted.
21
Extra
Picture Boost OSD SetupExit
Luminance Image Setup Color Setup
Off Timer 00
Input Select Auto
Auto Config. No
Reset No
Image Ratio Wide
DDC/CI Yes
Resolution : 1920(H)X1080(V)
H. Frequency : 67KHz
V. Frequency : 60Hz
Extra
Game Setting
Input Select Select Input Signal Source
Auto Cong. Yes or No Auto adjust the picture to default. (For D-SUB
models)
O timer 0-24hrs Select DC o time
Image Ratio
Wide
Select image ratio for display.
4:3
DDC/CI Yes or No Turn ON/OFF DDC/CI Support
Reset
Yes or No Reset the menu to default
ENERGY STAR® or No Reset the menu to default
(ENERGY STAR® available for selective models)
22
Exit
Picture Boost OSD Setup
Luminance Image Setup Color Setup
Exit
Extra
Game Setting
Exit Exit the main OSD
23
LED Indicator
Status LED Color
Full Power Mode White
Active-o Mode Orange
24
Troubleshoot
Problem & Question Possible Solutions
Power LED Is Not ON Make sure the power button is ON and the Power Cord is properly connected to a
grounded power outlet and to the monitor.
No images on the screen
Is the power cord connected properly?
Check the power cord connection and power supply.
Is the cable connected correctly?
(Connected using the VGA cable)
Check the VGA cable connection.
(Connected using the HDMI cable)
Check the HDMI cable connection.
(Connected using the DP cable)
Check the DP cable connection.
* VGA/HDMI/DP input is not available on every model.
If the power is on, reboot the computer to see the initial screen (the login screen),
which can be seen.
If the initial screen (the login screen) appears, boot the computer in the
applicable mode (the safe mode for Windows 7/8/10) and then change the
frequency of the video card.
(Refer to the Setting the Optimal Resolution)
If the initial screen (the login screen) does not appear, contact the Service
Center or your dealer.
Can you see “Input Not Supported” on the screen?
You can see this message when the signal from the video card exceeds the
maximum resolution and frequency that the monitor can handle properly.
Adjust the maximum resolution and frequency that the monitor can handle
properly.
Make sure the AOC Monitor Drivers are installed.
Picture Is Fuzzy & Has
Ghosting Shadowing Problem
Adjust the Contrast and Brightness Controls.
Press to auto adjust.
Make sure you are not using an extension cable or switch box. We recommend
plugging the monitor directly to the video card output connector on the back.
Picture Bounces, Flickers Or
Wave Pattern Appears In The
Picture
Move electrical devices that may cause electrical interference as far away from the
monitor as possible.
Use the maximum refresh rate your monitor is capable of at the resolution you are
using.
Monitor Is Stuck In Active O-
Mode”
The Computer Power Switch should be in the ON position.
The Computer Video Card should be snugly tted in its slot.
Make sure the monitor’s video cable is properly connected to the computer.
Inspect the monitor’s video cable and make sure no pin is bent.
Make sure your computer is operational by hitting the CAPS LOCK key on the
keyboard while observing the CAPS LOCK LED. The LED should either turn ON or
OFF after hitting the CAPS LOCK key.
Missing one of the primary
colors (RED, GREEN, or
BLUE)
Inspect the monitor’s video cable and make sure that no pin is damaged.
Make sure the monitor’s video cable is properly connected to the computer.
Screen image is not centered
or sized properly Adjust H-Position and V-Position or press hot-key (AUTO).
Picture has color defects
(white does not look white) Adjust RGB color or select desired color temperature.
Horizontal or vertical
disturbances on the screen
Use Windows 7/8/10 shut-down mode to adjust CLOCK and FOCUS.
Press to auto-adjust.
Regulation & Service
Please refer to Regulation & Service Information which is in the CD manual
or www.aoc.com (to nd the model you purchase in your country and to nd
Regulation & Service Information in Support page.
25
Specification
General Specification
Panel
Model name 24B2XD
Driving system TFT Color LCD
Viewable Image Size 60.47cm diagonal
Pixel pitch 0.2745(H)mm x 0.2745(V) mm
Video R, G, B Analog Interface & DVI Interface
Separate Sync H/V TTL
Display Color 16.7M Colors
Others
Horizontal scan range 30-85kHz
Horizontal scan Size(Maximum) 527.04mm
Vertical scan range 48-75Hz
Vertical Scan Size(Maximum) 296.46mm
Optimal preset resolution 1920x1080@60Hz
Max resolution 1920x1080@60Hz
Plug & Play VESA DDC2B/CI
Power Source 19Vdc,1.31A
Power Consumption
Typical(default brightness and contrast) 19W
Max. (brightness = 100, contrast =100) ≤ 23W
Standby mode ≤0.3W
Physical
Characteristics
Connector Type DVI/D-Sub/Earphone out
Signal Cable Type Detachable
Environmental
Temperature Operating 0°~ 40°
Non-Operating -25°~ 55°
Humidity Operating 10% ~ 85% (non-condensing)
Non-Operating 5% ~ 93% (non-condensing)
Altitude Operating 0~ 5000 m (0~ 16404ft )
Non-Operating 0~ 12192m (0~ 40000ft )
26
Panel
Model name 24B2XDA
Driving system TFT Color LCD
Viewable Image Size 60.47cm diagonal
Pixel pitch 0.2745(H)mm x 0.2745(V) mm
Video R, G, B Analog Interface & HDMI Interface & DVI Interface
Separate Sync H/V TTL
Display Color 16.7M Colors
Others
Horizontal scan range 30-85kHz
Horizontal scan Size(Maximum) 527.04mm
Vertical scan range 48-75Hz
Vertical Scan Size(Maximum) 296.46mm
Optimal preset resolution 1920x1080@60Hz
Max resolution 1920x1080@60Hz(VGA/DVI)
1920x1080@75Hz(HDMI)
Plug & Play VESA DDC2B/CI
Power Source 19Vdc,1.31A
Power Consumption
Typical(default brightness and contrast) 19W
Max. (brightness = 100, contrast =100) ≤ 23W
Standby mode ≤0.3W
Physical
Characteristics
Connector Type HDMI/DVI/D-Sub/Audio in/Earphone out
Signal Cable Type Detachable
Environmental
Temperature Operating 0°~ 40°
Non-Operating -25°~ 55°
Humidity Operating 10% ~ 85% (non-condensing)
Non-Operating 5% ~ 93% (non-condensing)
Altitude Operating 0~ 5000 m (0~ 16404ft )
Non-Operating 0~ 12192m (0~ 40000ft )
27
Panel
Model name 27B2DA
Driving system TFT Color LCD
Viewable Image Size 68.6cm diagonal
Pixel pitch 0.3114(H)mm x 0.3114(V) mm
Video R, G, B Analog Interface & HDMI Interface & DVI Interface
Separate Sync H/V TTL
Display Color 16.7M Colors
Others
Horizontal scan range 30-85kHz
Horizontal scan Size(Maximum) 597.888mm
Vertical scan range 48-75Hz
Vertical Scan Size(Maximum) 336.312mm
Optimal preset resolution 1920x1080@60Hz
Max resolution 1920x1080@60Hz(VGA/DVI)
1920x1080@75Hz(HDMI)
Plug & Play VESA DDC2B/CI
Power Source 19Vdc,1.31A
Power Consumption
Typical(default brightness and contrast) 19W
Max. (brightness = 100, contrast =100) ≤ 25W
Standby mode ≤0.3W
Physical
Characteristics
Connector Type HDMI/DVI/D-Sub/Audio in/Earphone out
Signal Cable Type Detachable
Environmental
Temperature Operating 0°~ 40°
Non-Operating -25°~ 55°
Humidity Operating 10% ~ 85% (non-condensing)
Non-Operating 5% ~ 93% (non-condensing)
Altitude Operating 0~ 5000 m (0~ 16404ft )
Non-Operating 0~ 12192m (0~ 40000ft )
28
Preset Display Modes
24B2XD
STANDARD RESOLUTION HORIZONTAL
FREQUENCY(kHz)
VERTICAL
FREQUENCY(Hz)
VGA
640x480@60Hz 31.469 59.94
640x480@72Hz 37.861 72.809
640x480@75Hz 37.5 75
MAC MODES VGA 640x480@67Hz 35 66.667
IBM MODE 720x400@70Hz 31.469 70.087
SVGA
800x600@56Hz 35.156 56.25
800x600@60Hz 37.879 60.317
800x600@72Hz 48.077 72.188
800x600@75Hz 46.875 75
MAC MODES SVGA 835x624@75Hz 49.725 74.5
XGA
1024x768@60Hz 48.363 60.004
1024x768@70Hz 56.476 70.069
1024x768@75Hz 60.023 75.029
SXGA
1280x1024@60Hz 63.981 60.02
1280x1024@75Hz 79.976 75.025
WSXG
1280x720@60HZ 45 60
1280x960@60Hz 60 60
WXGA+ 1440x900@60Hz 55.935 59.876
WSXGA+ 1680x1050@60Hz 65.29 59.954
FHD 1920x1080@60Hz 67.5 60
29
24B2XDA/27B2DA
STANDARD RESOLUTION HORIZONTAL
FREQUENCY(kHz)
VERTICAL
FREQUENCY(Hz)
VGA
640x480@60Hz 31.469 59.94
640x480@72Hz 37.861 72.809
640x480@75Hz 37.5 75
MAC MODES VGA 640x480@67Hz 35 66.667
IBM MODE 720x400@70Hz 31.469 70.087
SVGA
800x600@56Hz 35.156 56.25
800x600@60Hz 37.879 60.317
800x600@72Hz 48.077 72.188
800x600@75Hz 46.875 75
MAC MODES SVGA 835x624@75Hz 49.725 74.5
XGA
1024x768@60Hz 48.363 60.004
1024x768@70Hz 56.476 70.069
1024x768@75Hz 60.023 75.029
SXGA
1280x1024@60Hz 63.981 60.02
1280x1024@75Hz 79.976 75.025
WSXG
1280x720@60HZ 45 60
1280x960@60Hz 60 60
WXGA+ 1440x900@60Hz 55.935 59.876
WSXGA+ 1680x1050@60Hz 65.29 59.954
FHD 1920x1080@60Hz 67.5 60
FHD 1920x1080@75Hz 83.9 75
30
Pin Assignments
15-Pin Color Display Signal Cable
Pin No. Signal Name Pin No. Signal Name
1. Video-Red 9 +5V
2. Video-Green 10 Ground
3. Video-Blue 11 N.C.
4. N.C. 12 DDC-Serial data
5. Detect Cable 13 H-sync
6. GND-R 14 V-sync
7. GND-G 15 DDC-Serial clock
8. GND-B
19-Pin Color Display Signal Cable
Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name
1. TMDS Data 2+ 9. TMDS Data 0- 17. DDC/CEC Ground
2. TMDS Data 2 Shield 10. TMDS Clock + 18. +5V Power
3. TMDS Data 2- 11. TMDS Clock Shield 19. Hot Plug Detect
4. TMDS Data 1+ 12. TMDS Clock-
5. TMDS Data 1Shield 13. CEC
6. TMDS Data 1- 14. Reserved (N.C. on device)
7. TMDS Data 0+ 15. SCL
8. TMDS Data 0 Shield 16. SDA
31
24-Pin Color Display Signal Cable
Pin No. Signal Name Pin No. Signal Name
1 TMDS data 2- 13 TMDS data 3+
2 TMDS data 2+ 14 +5V Power
3 TMDS data 2/4 Shield 15 Ground (for+5V)
4 TMDS data 4- 16 Hot Plug Detect
5 TMDS data 4+ 17 TMDS data 0-
6 DDC Clock 18 TMDS data 0+
7 DDC Data 19 TMDS data 0/5 Shield
8 N.C. 20 TMDS data 5-
9 TMDS data 1- 21 TMDS data 5+
10 TMDS data 1+ 22 TMDS Clock Shield
11 TMDS data 1/3 Shield 23 TMDS Clock +
12 TMDS data 3- 24 TMDS Clock -
32
Plug and Play
Plug & Play DDC2B Feature
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor
to inform the host system of its identity and, depending on the level of DDC used, communicate additional information
about its display capabilities.
The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the
DDC2B channel.