Table of Contents
AOC AG254FG User Manual
Displayed below is the user manual for AG254FG by AOC which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
1
©
www.aoc.com
2021 AOC.All Rights Reserved
TM
LCD Monitor
User Manual
AG254FG
i
Safety ................................................................................................................................................................................... 1
National Conventions ................................................................................................................................................ 1
Power ........................................................................................................................................................................ 2
Installation ................................................................................................................................................................. 3
Cleaning .................................................................................................................................................................... 4
Other ......................................................................................................................................................................... 5
Setup .................................................................................................................................................................................... 6
Contents in Box ......................................................................................................................................................... 6
Setup Stand & Base .................................................................................................................................................. 7
Adjusting the monitor ................................................................................................................................................ 8
Connecting the Monitor ............................................................................................................................................. 9
Wall Mounting.......................................................................................................................................................... 10
Adaptive-Sync function (Available for selective models) ..........................................................................................11
G-SYNC function ......................................................................................................................................................11
HDR ........................................................................................................................................................................ 12
Adjusting ............................................................................................................................................................................. 13
Hotkeys ................................................................................................................................................................... 13
Quick Switch ........................................................................................................................................................... 14
OSD Key Guide (Menu) .......................................................................................................................................... 15
OSD Setting ............................................................................................................................................................ 17
Game Setting ............................................................................................................................................... 18
Luminance ................................................................................................................................................... 19
G-SYNC® Processor ................................................................................................................................... 20
Color Setup .................................................................................................................................................. 21
Audio ............................................................................................................................................................ 22
Light FX ....................................................................................................................................................... 23
Extra ............................................................................................................................................................ 24
OSD Setup ................................................................................................................................................... 25
LED Indicator .......................................................................................................................................................... 26
Troubleshoot ....................................................................................................................................................................... 27
Specication ....................................................................................................................................................................... 28
General Specication .............................................................................................................................................. 28
Preset Display Modes ............................................................................................................................................. 29
Pin Assignments ...................................................................................................................................................... 30
Plug and Play .......................................................................................................................................................... 31
1
Safety
National Conventions
The following subsections describe notational conventions used in this document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These
blocks are notes, cautions, and warnings, and they are used as follows:
NOTE: A NOTE indicates important information that helps you make better use of your computer system.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem.Some warnings
may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specic presentation of the
warning is mandated by regulatory authority.
2
Power
The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the
type of power supplied to your home, consult your dealer or local power company.
The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will t
only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an
electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of
the grounded plug.
Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the
monitor from damage due to power surges.
Do not overload power strips and extension cords. Overloading can result in re or electric shock.
To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate congured
receptacles marked between 100-240V AC, Min. 5A.
The wall socket shall be installed near the equipment and shall be easily accessible.
For use only with the attached power adapter
Manufacturers: TPV ELECTRONICS(FUJIAN)CO.,LTD. Model: ADPC20120
3
Installation
Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a
person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by
the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and use
mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.
Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a re or electric
shock. Never spill liquids on the monitor.
Do not place the front of the product on the oor.
If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit
instructions.
Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence
overheating may cause a re or damage to the monitor.
To avoid potential damage, for example the panel peeling from the bezel, ensure that the monitor does not tilt
downward by more than -5 degrees. If the -5 degree downward tilt angle maximum is exceeded, the monitor damage will
not be covered under warranty.
See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on the
stand:
Installed with stand
Installed with stand
12 inches
30cm
4 inches
10cm
4 inches
10cm
4 inches
10cm
Leave at lease this
space around the set
4
Cleaning
Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent
which will cauterize the product cabinet.
When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it
will scratch the screen surface.
Please disconnect the power cord before cleaning the product.
5
Other
If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a
Service Center.
Make sure that the ventilating openings are not blocked by a table or curtain.
Do not engage the LCD monitor in severe vibration or high impact conditions during operation.
Do not knock or drop the monitor during operation or transportation.
6
Setup
Contents in Box
*
*
*
Quick Switch
Keypad
*
***
CD Manual Stand Screwdriver Base Wire clipWarranty card
Adaptor DP Cable HDMI Cable USB Cable Micphone
Cable
Power Cable
Shading Hood
Packet
Not all signal cables will be provided for all countries and regions. Please check with the local dealer or AOC branch
ofce for conrmation.
7
Setup Stand & Base
Please setup or remove the base following the steps as below.
Setup:
1
45
2
3
Remove:
6
32
5
4
1
8
Adjusting the monitor
For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own
preference.
Hold the stand so you will not topple the monitor when you change the monitor’s angle.
You are able to adjust the monitor as below:
130mm
90°
30°
30°
NOTE:
Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.
Warning：
1. To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than
-5 degrees.
2. Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.
9
Connecting the Monitor
Cable Connections In Back of Monitor and Computer:
11 26
3
8
1
54
10
9
7
12
1. Microphone in
2. Earphone (Combined with Microphone)
3. USB3.2 Gen1 downstream + fast charging
4. USB3.2 Gen1 downstream(Reex Latency Analyzer)(Green port)
5. USB3.2 Gen1 upstream
6. AC in
7. HDMI1
8. HDMI2
9. DP
10. Quick Switch port
11. Microphone out (Connect to PC)
12. Luminance (Light) sensor
Connect to PC
1. Connect the power cord to the back of the display rmly.
2. Turn off your computer and unplug its power cable.
3. Connect the display signal cable to the video connector on the back of your computer.
4. Plug the power cord of your computer and your display into a nearby outlet.
5. Turn on your computer and display.
If your monitor displays an image, installation is complete. If it does not display an image, please refer Troubleshooting.
To protect equipment, always turn off the PC and LCD monitor before connecting.
10
Wall Mounting
Preparing to Install An Optional Wall Mounting Arm.
6
32
5
4
1
This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this procedure.
Follow these steps:
1. Remove the base.
2. Follow the manufacturer’s instructions to assemble the wall mounting arm.
3. Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the back of
the monitor.
4. Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for instructions on
attaching it to the wall.
Noted: VESA mounting screw holes are not available for all models, please check with the dealer or ofcial department of
AOC.
-5°
0° 90°
* Display design may differ from those illustrated.
Warning：
1. To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than
-5 degrees.
2. Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.
11
Adaptive-Sync function (Available for selective models)
1. Adaptive-Sync function is working with DP/HDMI
2. Compatible Graphics Card: Recommend list is as the below, also could be checked by visiting www.AMD.com
• Radeon™ RX Vega series
• Radeon™ RX 500 series
• Radeon™ RX 400 series
• Radeon™ R9/R7 300 series （R9 370/X, R7 370/X, R7 265 except）
• Radeon™ Pro Duo (2016)
• Radeon™ R9 Nano series
• Radeon™ R9 Fury series
• Radeon™ R9/R7 200 series (R9 270/X, R9 280/X except)
G-SYNC function
Compatible Graphics Card: GeForece GTX 1070 Boost or higher (for a list of compatible graphics cards,
please visit www.nividia.com/G-SYNC)
Driver: GeForece 331.58 or higer OS: Windows 10 64b (other version of Windows are not supported by the provided
HDR driver!)
12
HDR
It is compatible with input signals in HDR400 format.
The display may automatically activate the HDR function if the player and content are compatible. Please contact the
device manufacturer and the content provider for information on the compatibility of your device and content. Please
select “OFF” for the HDR function when you have no need for automatical activation function.
Note:
1. No special setting is needed for the DisplayPort/HDMI interface in WIN10 versions lower (older) than V1703.
2. Only the HDMI interface is available and the DisplayPort interface cannot function in WIN10 version V1703.
3. The display resolution is set to 1920x1080, and HDR is preset to ON. Under these conditions, the screen may slightly
dim, indicating HDR has been activated.
13
Adjusting
Hotkeys
4
1
3
5
2
1 Source/Up
2 Dial Point/Down
3 Game Mode/Left
4 Light FX /Right
5 Power/ Menu/Enter
Power/Menu/Enter
Press the Power button to turn on the monitor.
When there is no OSD, Press to display the OSD or conrm the selection. Press about 2 seconds to turn off the monitor.
Dial Point/Down
When there is no OSD, press Dial Point button to show / hide Dial Point.
Game Mode/Left
When there is no OSD, press ”Left” key to open game mode function, then press ”Left” or “Right” key to select game mode
(FPS, RTS, Racing, Gamer 1, Gamer 2 or Gamer 3) basing on the different game types.
Light FX/Right
When there is no OSD, press “Right” key to active Light FX function.
Source/Up
When the OSD is closed, press Source/Auto/Up button will be Source hot key function.
14
Quick Switch
◄:
When there is no OSD, press the ◄ button to open game mode function, then press ◄ or ► key to select game mode (FPS,
RTS, Racing, G-SYNC Esports,Gamer 1, Gamer 2 or Gamer 3) basing on the different game types.
►:
When there is no OSD, press “Right” key to active Light FX function.
Menu/OK:
When there is no OSD, Press to display the OSD or conrm the selection.
▲:
When the OSD is closed, press ▲ button will be Source hot key function.
▼:
When there is no OSD, press Dial Point button to show / hide Dial Point.
1:
Press the 1 button to select Gamer 1 mode
2:
Press the 2 button to select Gamer 2 mode
3:
Press the 3 button to select Gamer 3 mode
Press to exit OSD.
15
OSD Key Guide (Menu)
Enter Move Exit
Enter : Use Enter key to enter the next OSD level
Move : Use Left / Up / Down key to move OSD selection
Exit : Use Right key to exit OSD
Enter Move Exit
Enter : Use Enter key to enter the next OSD level
Move : Use Right / Up / Down key to move OSD selection
Exit : Use Left key to exit OSD
Enter Move Exit
Enter : Use Enter key to enter the next OSD level
Move : Use Up / Down key to move OSD selection
Exit : Use Left key to exit OSD
Enter Move
Move : Use Left / Right / Up / Down Key to move OSD selection
Exit Enter Select
Exit : Use Left key to exit OSD to previous OSD level
Enter : Use Right key to enter next OSD level
Select : Use Up / Down key to move OSD selection
Enter Select
Enter : Use Enter key to apply the OSD setting and back to previous OSD level
Select : Use Down key to adjust OSD setting
16
Enter Select
Select : Use Up / Down key to adjust OSD setting
Enter Select
Enter : Use Enter key to exit OSD to previous OSD level
Select : Use Left / Right key to adjust OSD setting
17
OSD Setting
Basic and simple instruction on the control keys.
OSD SetupExtras
Light FXAudio
Color Setup
Enter Move Exit Enter Move Exit
Light FXAudio
G-SYNC
®
Processor
G-SYNC
®
Processor
1). Press the MENU-button to activate the OSD window.
2). Follow Key Guide to move or select (adjust) OSD settings
3). OSD Lock/Unlock Function: To lock or unlock the OSD, press and hold the Down–button for 10s while OSD function is
not active.
Notes:
If the product has only one signal input, the item of “Input Select” is disable to adjust.
18
Game Setting
Game Setting
OffGame Mode
Overdrive Off
Shadow Control 0
DialPoint Off
Exit Enter Select
Frame Counter Off
QuickSwitch LED Off
Game Mode
FPS For playing FPS (rst Person Shooters) games. Improves
dark theme black level details.
RTS For playing RTS (Real Time Strategy). Improves the image
quality.
Racing For playing Racing games, Provides fastest response time
and high color saturation.
G-SYNC Esports NVIDIA preference Settings. Improves quality.
Gamer 1 User’s preference settings saved as Gamer 1.
Gamer 2 User’s preference settings saved as Gamer 2.
Gamer 3 User’s preference settings saved as Gamer 3.
Off No optimization by Smart image game
Shadow Control 0-3
Shadow Control Default is 0, then end-user can adjust from
0 to 3 or 0 to increase contrast for clear picture.
1. If picture is too dark to be saw the detail clearly,
adjusting from 0 to 3 for clear picture..
2. If picture is too white to be saw the detail clearly,
adjusting from 3 to 0 for clear picture
DialPoint On / Off
The“Dial Point”function places an aiming indicator in the
center of screen for helping gamers to play First Person
Shooter (FPS) games with an accurate and precise aiming.
QuickSwitch LED On / Off Disable or Enable QuickSwitch LED
Overdrive Weak/Medium/
Strong/Off Adjust the response time.
Frame Counter
Off / Right-Up /
Right-Down / Left-
Down / Left-Up
Display V frequency on the corner selected
(Frame counter feature only works with NVIDIA graphic
card.)
19
Luminance
Luminance
50Contrast
Exit Enter Select
Peak white (nits) 280
Variable Backlight Mode Gaming
Relative Gamma Default
SDR Colors sRGB Off
SDR Variable Backlight On
HDR Variable Backlight On
OffAuto Brightness
Contrast 0-100 Contrast from Digital-register.
Peak white (nits) 40-450 Peak white setting.(Only for SDR)
Ref. white (nits) 40-450 Ref. white setting.(Only for HDR)
Variable Backlight Mode Gaming/Hybrid/Desktop Variable Backlight Mode setting
Relative Gamma -0.4/-0.2/
Default/+0.2/+0.4 Relative Gamma setting.
SDR Colors sRGB Off/On Disable or Enable SDR Colors sRGB.
SDR Variable Backlight Off/On Disable or Enable SDR Variable Backlight.
HDR Variable Backlight Off/On Disable or Enable HDR Variable Backlight.
Auto Brightness Off/On Enable automatic brightness. (By Luminance
(Light) sensor)
20
G-SYNC® Processor
Exit Enter Select
G-SYNC
®
Processor
Deep sleep Off
OffOff
Off
Off
Off
USB Charge
NVIDIA Reflex Latency Analyzer
ULMB
ULMB Pulse Width
Deep sleep OFF/ON
Set the “allow deep sleep mode” to ON or OFF. The
deep sleep mode will turn the FPGA completely
off after a certain amount of time when either the
user presses the monitor DC power off button or
the PC puts the monitor to sleep.
USB Charge OFF/ON USB function By Model setting
NVIDIA Reex
Latency Analyzer
(with Mouse Logo)
PC+Display Latency OFF/ON
Monitoring Sensitivity Low/Medium/High
Show Monitoring Rectangle OFF/ON
Rectangle Preset Centered/Right Handed/Left Handed
Rectangle Location
Rectangle Size
ULMB ON/OFF Return ULMB capability for the timing associated
with the timing index.
ULMB Pulse Width 10~100 ULMB PWM setting
Note:
With Nvida® Ultra Low Motion Blur(ULMB) technology, objects in motion look sharper than they do during standard
operation -even at high refresh rates such as 144Hz,240Hz.
21
Color Setup
Exit Enter Select
Color Setup
DP YCbCr sRGB
HDMI YCbCr sRGB
6-axis color
Color Temp.
On
Off
Warm
Green
Blue
50
50
Red 50
OffLowBlue Mode
LowBlue Mode
Off / Multimedia
/ Internet /
Ofce / Reading
Decrease blue light wave by controlling color
temperature.
DP YCbCr sRGB Off/On Disable or Enable DP YCbCr sRGB.
HDMI YCbCr sRGB Off/On Disable or Enable HDMI YCbCr sRGB.
6-axis color
Red color 0-255
Green color 0-255
Blue color 0-255
Cyan color 0-255
Yellow color 0-255
Magenta color 0-255
Color Temp.
Warm Recall Warm Color Temperature from EEPROM.
Normal Recall Normal Color Temperature from EEPROM.
Cool Recall Cool Color Temperature from EEPROM.
User
Red Gain from Digital-register
Green Gain Digital-register.
Blue Gain from Digital-register
Red 0-100 Red gain from Digital-register.
Green 0-100 Green gain from Digital-register.
Blue 0-100 Blue gain from Digital-register.
22
DP YCbCr sRGB
Gamma curve selection for YCbCr formats on DP input in SDR mode; get/set methods (returns off or on):
When enabled (default), the DP input will use sRGB gamma to display YCbCr inputs.
When disabled, the DP input will use BT1886 gamma to display YCbCR inputs.
Default is: ON
HDMI YCbCr sRGB
Gamma curve selection for YCbCr formats on HDMI input in SDR mode; get/set methods (returns off or on):
When enabled , the HDMI input will use sRGB gamma to display YCbCr inputs.
When disabled (default), the HDMI input will use BT1886 gamma to display YCbCR inputs.
Default is: OFF
Audio
Exit Enter Select
Audio
DTS Sound Off
70Volume
Volume 0-100 Adjust volume setting
DTS Sound Off/On DTS On/Off.
23
Light FX
Exit Enter Select
Light FX
Light FX Mode
Pattern
Foreground R 50
50
50
50
50
50
Foreground G
Foreground B
Background R
Background G
Background B
Breathing
Rainbow
OffLight FX
R
G
B
R
G
B
Light FX Off / Low / Medium /
Strong Select the intensity of Light FX.
Light FX Mode
Static / Dark Point Sweep
/ Gradient Shift / Spread
Fill / Drip Fill / Spreading
Drip Fill / Breathing / Light
Point Sweep / Zoom /
Rainbow / Water Wave /
Flashing / Demo
Select Light FX Mode
Pattern Red / Green / Blue /
Rainbow / User Dene Select Light FX Pattern
Foreground R
0-100 User can adjust Light FX foreground color, when
Pattern setting to user dene
Foreground G
Foreground B
Background R
0-100 User can adjust Light FX background color, when
Pattern setting to user dene
Background G
Background B
24
Extra
Exit Enter Select
Extra
Logo Projector
DPInput Select
DP
Red
Green
Blue
50
50
50
Medium
Reset
Information
OffInput Auto Switch
Input Auto Switch Off/On Disable or Enable Input Auto Switch.
Input Select HDMI1/HDMI2/DP Select Input Signal Source
Logo Projector Off/Weak/Medium/Strong It’s projection logo function.
Red 0 ~ 100 Red gain from Digital-register.
Green 0 ~ 100 Green gain from Digital-register.
Blue 0 ~ 100 Blue gain from Digital-register.
Reset Yes or No Reset the menu to default
Information
Resolution Ex. 1920x1080
V. Frequency Ex: 360Hz
Mode Ex. (Normal/G-Sync).
Format
Format: (1) - (2)
(1)Unknown/RGB444/YCbCr444/YCbCr422
(2)Unknown/sRGB/BT601/BT709/BT2020 "
Range Unknown/Full/Limited
EOTF Unknown/SDR-sRGB/SDR-BT1886/ HDR-
ST2084
OD Active
Mouse Analyzer Enable/Disable
25
OSD Setup
Exit Enter Select
OSD Setup
Timeout 110
EnglishLanguage
H.Position
V.Position
Transparence
Break Reminder
100
100
100
Off
Language Select the OSD language
Timeout 10-120 Adjust the OSD Timeout
H. Position 0-100 Adjust the horizontal position of OSD
V. Position 0-100 Adjust the vertical position of OSD
Transparence 0-100 Adjust the transparence of OSD
Break Reminder on /off Break reminder if the user continuously work for more than 1hrs
26
LED Indicator
Status LED Color
Full Power Mode White
Active-off Mode Orange
27
Troubleshoot
Problem & Question Possible Solutions
Power LED Is Not ON Make sure the power button is ON and the Power Cord is properly connected to a
grounded power outlet and to the monitor.
No images on the screen
Is the power cord connected properly?
Check the power cord connection and power supply.
Is the cable connected correctly?
(Connected using the DP cable)
Check the DP cable connection.
(Connected using the HDMI cable)
Check the HDMI cable connection.
If the power is on, reboot the computer to see the initial screen (the login screen),
which can be seen.
If the initial screen (the login screen) appears, boot the computer in the
applicable mode (the safe mode for Windows 7/8/10) and then change the
frequency of the video card.
(Refer to the Setting the Optimal Resolution)
If the initial screen (the login screen) does not appear, contact the Service
Center or your dealer.
Can you see “Input Not Supported” on the screen?
You can see this message when the signal from the video card exceeds the
maximum resolution and frequency that the monitor can handle properly.
Adjust the maximum resolution and frequency that the monitor can handle
properly.
Make sure the AOC Monitor Drivers are installed.
Picture Is Fuzzy & Has
Ghosting Shadowing Problem
Adjust the Contrast and Brightness Controls.
Press to auto adjust.
Make sure you are not using an extension cable or switch box. We recommend
plugging the monitor directly to the video card output connector on the back.
Picture Bounces, Flickers Or
Wave Pattern Appears In The
Picture
Move electrical devices that may cause electrical interference as far away from the
monitor as possible.
Use the maximum refresh rate your monitor is capable of at the resolution you are
using.
Monitor Is Stuck In Active Off-
Mode”
The Computer Power Switch should be in the ON position.
The Computer Video Card should be snugly tted in its slot.
Make sure the monitor’s video cable is properly connected to the computer.
Inspect the monitor’s video cable and make sure no pin is bent.
Make sure your computer is operational by hitting the CAPS LOCK key on the
keyboard while observing the CAPS LOCK LED. The LED should either turn ON or
OFF after hitting the CAPS LOCK key.
Missing one of the primary
colors (RED, GREEN, or
BLUE)
Inspect the monitor’s video cable and make sure that no pin is damaged.
Make sure the monitor’s video cable is properly connected to the computer.
Picture has color defects
(white does not look white) Adjust RGB color or select desired color temperature.
Horizontal or vertical
disturbances on the screen
Use Windows 7/8/10 shut-down mode to adjust CLOCK and FOCUS.
Press to auto-adjust.
28
Specification
General Specification
Panel
Model name AG254FG
Driving system TFT Color LCD
Viewable Image Size 62.2 cm diagonal
Pixel pitch 0.2829mm(H) x 0.2802mm(V)
Display Color 16.7M Colors
Others
Horizontal scan range 30~280kHz (HDMI)
30~400kHz (DP)
Horizontal scan Size(Maximum) 543.168 mm
Vertical scan range 48~240Hz (HDMI)
1~360Hz (DP)
Vertical Scan Size(Maximum) 302.616 mm
Optimal preset resolution 1920 x 1080@60Hz
Max resolution 1920 x 1080@240Hz (HDMI)
1920 x 1080@360Hz (DP)
Plug & Play VESA DDC2B/CI
Power Source 20Vdc, 6.0A
Power Consumption
Typical (default brightness and contrast) 38W
Max. (Brightness = 100, contrast =100) ≤100W
Standby mode ≤0.5W
Physical
Characteristics
Connector Type HDMI/ DP/ USB/ Earphone out/ Microphone In
Signal Cable Type Detachable
Environmental
Temperature Operating 0°~ 40°
Non-Operating -25°~ 55°
Humidity Operating 10% ~ 85% (non-condensing)
Non-Operating 5% ~ 93% (non-condensing)
Altitude Operating 0~ 5000 m (0~ 16404ft )
Non-Operating 0~ 12192m (0~ 40000ft )
29
Preset Display Modes
STANDARD RESOLUTION HORIZONTAL
FREQUENCY(kHz)
VERTICAL
FREQUENCY(Hz)
VGA 640 x 480 (60p Hz) 31.469 59.94
DOS MODE 720 x 480 (60p Hz) 29.855 59.71
SD 720 x 576 (50p Hz) 31.25 50
SVGA 800 x 600 (60p Hz) 37.879 60.317
XGA 1024 x 768 (60p Hz) 48.363 60.004
HD 1280 x 720 (60p Hz) 44.772 59.885
Full HD 1920 x 1080 (60p Hz) 67.5 60
Full HD 1920 x 1080 (120p Hz) 137.259 119.982
Full HD 1920 x 1080 (144p Hz) 158.113 144.001
Full HD 1920 x 1080 (240p Hz) 274.519 239.964
Full HD (for DP) 1920 x 1080 (360p Hz) 399.6 360
30
Pin Assignments
19-Pin Color Display Signal Cable
Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name
1. TMDS Data 2+ 9. TMDS Data 0- 17. DDC/CEC Ground
2. TMDS Data 2 Shield 10. TMDS Clock + 18. +5V Power
3. TMDS Data 2- 11. TMDS Clock Shield 19. Hot Plug Detect
4. TMDS Data 1+ 12. TMDS Clock-
5. TMDS Data 1Shield 13. CEC
6. TMDS Data 1- 14. Reserved (N.C. on device)
7. TMDS Data 0+ 15. SCL
8. TMDS Data 0 Shield 16. SDA
20-Pin Color Display Signal Cable
Pin No. Signal Name Pin No. Signal Name
1 ML_Lane 3 (n) 11 GND
2 GND 12 ML_Lane 0 (p)
3 ML_Lane 3 (p) 13 CONFIG1
4 ML_Lane 2 (n) 14 CONFIG2
5 GND 15 AUX_CH(p)
6 ML_Lane 2 (p) 16 GND
7 ML_Lane 1 (n) 17 AUX_CH(n)
8 GND 18 Hot Plug Detect
9 ML_Lane 1 (p) 19 Return DP_PWR
10 ML_Lane 0 (n) 20 DP_PWR
31
Plug and Play
Plug & Play DDC2B Feature
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to
inform the host system of its identity and, depending on the level of DDC used, communicate additional information about
its display capabilities.
The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the
DDC2B channel.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol,
& DTS and the Symbol together are registered trademarks, and DTS Sound is a trademark of DTS, Inc. © DTS, Inc. All
Rights Reserved.