Table of Contents
AOC CQ34G2 User Manual
Displayed below is the user manual for CQ34G2 by AOC which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
1
www.aoc.com
LCD Monitor User Manual
CU34G2/CU34G2X English LED backlight
©2019 AOC. All Rights Reserved.
i
Safety ................................................................................................................................................................................... 1
National Conventions ................................................................................................................................................ 1
Power ........................................................................................................................................................................ 2
Installation ................................................................................................................................................................. 3
Cleaning .................................................................................................................................................................... 4
Other ......................................................................................................................................................................... 5
Setup .................................................................................................................................................................................... 6
Contents in Box ......................................................................................................................................................... 6
Setup Base ................................................................................................................................................................ 7
Adjusting Viewing Angle ............................................................................................................................................ 8
Connecting the Monitor ............................................................................................................................................. 9
Freesync function .................................................................................................................................................... 10
Adjusting ..............................................................................................................................................................................11
Hotkeys ....................................................................................................................................................................11
OSD Setting ............................................................................................................................................................ 12
Luminance ................................................................................................................................................... 13
Color Setup .................................................................................................................................................. 14
Picture Boost ............................................................................................................................................... 15
OSD Setup ................................................................................................................................................... 16
PIP Setting ................................................................................................................................................... 17
Game Setting ............................................................................................................................................... 18
Extra ............................................................................................................................................................ 19
Exit ............................................................................................................................................................... 20
LED Indicator .......................................................................................................................................................... 21
Troubleshoot ....................................................................................................................................................................... 22
Specication ....................................................................................................................................................................... 23
General Specication .............................................................................................................................................. 23
Preset Display Modes ............................................................................................................................................. 24
Pin Assignments ...................................................................................................................................................... 25
Plug and Play .......................................................................................................................................................... 26
1
Safety
National Conventions
The following subsections describe notational conventions used in this document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These
blocks are notes, cautions, and warnings, and they are used as follows:
NOTE: A NOTE indicates important information that helps you make better use of your computer system.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings
may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specic presentation of the
warning is mandated by regulatory authority.
2
Power
The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the
type of power supplied to your home, consult your dealer or local power company.
The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will t
only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an
electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of
the grounded plug.
Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the
monitor from damage due to power surges.
Do not overload power strips and extension cords. Overloading can result in re or electric shock.
To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate congured
receptacles marked between 100-240V AC, Min. 5A.
The wall socket shall be installed near the equipment and shall be easily accessible.
3
Installation
Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a
person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by
the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and use
mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.
Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a re or electric
shock. Never spill liquids on the monitor.
Do not place the front of the product on the oor.
If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit
instructions.
Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence
overheating may cause a re or damage to the monitor.
See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on the
stand:
Installed with stand
Installed with stand
12 inches
30cm
4 inches
10cm
4 inches
10cm
4 inches
10cm
Leave at lease this
space around the set
Please purchase a suitable wall mount to avoid the lack of distance between the back signal cable and the wall.
4
Cleaning
Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent
which will cauterize the product cabinet.
When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it
will scratch the screen surface.
Please disconnect the power cord before cleaning the product.
5
Other
If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a
Service Center.
Make sure that the ventilating openings are not blocked by a table or curtain.
Do not engage the LCD monitor in severe vibration or high impact conditions during operation.
Do not knock or drop the monitor during operation or transportation.
6
Setup
Contents in Box
*
*
*
*
*
*
Not all signal cables (HDMI / DP / USB /Audio cables) will be provided for all countries and regions. Please check
with the local dealer or AOC branch ofce for conrmation.
CD Manual Warranty card Stand Base
Power Cable USB Cable HDMI Cable DP Cable Audio Cable
7
Setup Base
Please setup or remove the base following the steps as below.
Please place the monitor on a soft and at surface to prevent the scratch.
Setup:
Remove:
8
Adjusting Viewing Angle
For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own
preference.
Hold the stand so you will not topple the monitor when you change the monitor’s angle.
You are able to adjust the monitor as below:
NOTE:
Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.
9
Connecting the Monitor
Cable Connections In Back of Monitor and Computer:
CU34G2 CU34G2X
134
5
6
7
821234
5
6
7
8
1. HDMI
2. DisplayPort
3. Earphone out
4. Power
5. USB-PC upstream
6. USB 3.2 Gen 1
7. USB3. 2 Gen1+Quick Charging
8. USB 3.2 Gen 1
Connect to PC
1. Connect the power cord to the back of the display rmly.
2. Turn off your computer and unplug its power cable.
3. Connect the display signal cable to the video connector on the back of your computer.
4. Plug the power cord of your computer and your display into a nearby outlet.
5. Turn on your computer and display.
If your monitor displays an image, installation is complete. If it does not display an image, please refer Troubleshooting.
To protect equipment, always turn off the PC and LCD monitor before connecting.
10
Freesync function
1. Freesync function is working with DP1/DP2/HDMI1/HDMI2
2. Compatible Graphics Card: Recommend list is as the below, also could be checked by visiting www.AMD.com
• AMD Radeon™ RX 480
• AMD Radeon™ RX 470
• AMD Radeon™ RX 460
Radeon Pro Duo
• AMD Radeon R9 300 Series
• AMD Radeon R9 Fury X
• AMD Radeon R9 360
• AMD Radeon R7 360
• AMD Radeon R9 295X2
• AMD Radeon R9 290X
• AMD Radeon R9 290
• AMD Radeon R9 285
• AMD Radeon R7 260X
• AMD Radeon R7 260
11
Adjusting
Hotkeys
1 2 3 4 5
1 Source/Exit
2 Game Mode/<
3 Dial Point/>
4 Menu/Enter
5 Power
Source/Exit
When the OSD is closed, press Source/Exit button will be Source hot key function.
Game Mode/<
When there is no OSD, press ”<” key to open game mode function, then press ”<” or “>” key to select game mode (FPS,
RTS, Racing, Gamer 1, Gamer 2 or Gamer 3) basing on the different game types.
Dial Point/>
When there is no OSD, press Dial Point button to active Dial Point menu, and then press “<” or “>” to set Dial Point on or
off.
Menu/Enter
Press to display the OSD or conrm the selection.
Power
Turn on/off the monitor.
12
OSD Setting
Basic and simple instruction on the control keys.
Luminance Color Setup Picture Boost OSD Setup ExitExtra
Contrast 50
Brightness 90
Eco mode Standard
Gamma Gamma1
DCR Off
HDR Mode Off
PIP Setting
PIP
Game Setting
1. Press the MENU-button to activate the OSD window.
2. Press Left or Right to navigate through the functions. Once the desired function is highlighted, press the
MENU-button to activate it, press Left or Right to navigate through the sub-menu functions. Once the desired
function is highlighted, press MENU-button to activate it.
3. Press Left or to change the settings of the selected function. Press to exit. If you want to adjust any other
function, repeat steps 2-3.
4. OSD Lock Function: To lock the OSD, press and hold the MENU-button while the monitor is off and then press
power button to turn the monitor on. To un-lock the OSD - press and hold the MENU-button while the monitor
is off and then press power button to turn the monitor on.
Notes:
1. If the product has only one signal input, the item of “Input Select” is disable to adjust.
2. If the product screen size is 4:3 or input signal resolution is native resolution, the item of “Image Ratio” is disabled.
3. One of DCR, Color Boost and Picture Boost functions is activated, the other two function s are turned off accordingly.
13
Luminance
Luminance Color Setup Picture Boost OSD Setup ExitExtra
Contrast 50
Brightness 90
Eco mode Standard
Gamma Gamma1
DCR Off
HDR Mode Off
PIP Setting
PIP
Game Setting
Contrast 0-100 Contrast from Digital-register.
Brightness 0-100 Backlight Adjustment
Eco mode
Standard Standard Mode
Text Text Mode
Internet Internet Mode
Game Game Mode
Movie Movie Mode
Sports Sports Mode
Reading Reading Mode
Uniformity Uniformity Mode
Gamma
Gamma1 Adjust to Gamma 1
Gamma2 Adjust to Gamma 2
Gamma3 Adjust to Gamma 3
DCR
Off Disable dynamic contrast ratio
On Enable dynamic contrast ratio
HDR
(CU34G2X)
Off
Adjust HDR Mode
Note:
When HDR is detected, the HDR option is
displayed for adjustment. When HDR is not
detected, the HDR Mode option is displayed for
adjustment.
DisplayHDR
HDR Picture
HDR Movie
HDR Game
HDR Mode
Off
Adjust HDR Mode
HDR Picture
HDR Movie
HDR Game
Note:
The function MBR and Overdrive Boost are available only when Adaptive-Sync is off and the vertical frequency is up to
75 Hz.
14
Color Setup
Luminance
Red 50
Green 50
Blue 50DCB Demo Off
Color Temp. Warm
DCB Mode Off
Color Setup
Picture Boost OSD Setup ExitExtraPIP Setting
PIP
Game Setting
Color Temp.
Warm Recall Warm Color Temperature from EEPROM.
Normal Recall Normal Color Temperature from EEPROM.
Cool Recall Cool Color Temperature from EEPROM.
sRGB Recall SRGB Color Temperature from EEPROM.
User Restore Color Temperature from EEPROM.
DCB Mode
Full Enhance On or Off Disable or Enable Full Enhance Mode
Nature Skin On or Off Disable or Enable Nature Skin Mode
Green Field On or Off Disable or Enable Green Field Mode
Sky-blue On or Off Disable or Enable Sky-blue Mode
AutoDetect On or Off Disable or Enable AutoDetect Mode
Off Disable DCB Mode
DCB Demo On or Off Disable or Enable Demo
Red 0-100 Red gain from Digital-register.
Green 0-100 Green gain from Digital-register.
Blue 0-100 Blue gain from Digital-register.
15
Picture Boost
Luminance
Brightness 50
Contrast 50
H. Position 0
V. Position 0
Bright Frame Off
Frame Size 14
Picture Boost Color Setup
OSD Setup ExitExtraPIP Setting
PIP
Game Setting
Bright Frame On or Off Disable or Enable Bright Frame
Frame Size 14-100 Adjust Frame Size
Brightness 0-100 Adjust Frame Brightness
Contrast 0-100 Adjust Frame Contrast
H. position 0-100 Adjust Frame horizontal Position
V. position 0-100 Adjust Frame vertical Position
Note:
Adjust the brightness, contrast, and position of the Bright Frame for better viewing experience.
16
OSD Setup
ExitExtra
Luminance Color Setup
H. Position 50
V. Position 0
Transparence 25
Language English
Timeout 10 Break Reminder Off
OSD Setup Picture Boost
DP Capability 1.2/1.4 Volume
PIP Setting
PIP
Game Setting
50 Off
Frame Counter
Language Select the OSD language
Timeout 5-120 Adjust the OSD Timeout
DP Capability 1.1/1.2 (CU34G2)
1.1/1.2/1.4 (CU34G2X)
Please be noted that only DP1.2 support Adaptive-
Sync function
H. Position 0-100 Adjust the horizontal position of OSD
V. Position 0-100 Adjust the vertical position of OSD
Volume 0-100 Volume Adjustment.
Transparence 0-100 Adjust the transparence of OSD
Break Reminder
(Pause-
Erinnerung)
On (Ein) / Off (Aus) Break reminder if the user continuously work for
more than 1hrs
Frame Counter
(CU34G2)
Off / Right-Up /Right-
Down / Left-Down / Left-
Up
Display V frequency on the corner selected.
Notes:
If the DP video content supports DP1.2, please select DP1.2 for DP Capability; otherwise, please select DP1.1.
17
PIP Setting
ExitExtra
Luminance Color Setup
Size
Position
PIP Setting Off
Main Source
Swap Off
Picture Boost
Sub Source HDMI1 Audio
PIP Setting
PIP
Game Setting
OSD Setup
HDMI2
Small
Off
Right-Up
PIP Setting Off / PIP / PBP Off
Main Source Follow Input Select Content HDMI1
Sub Source Follow Input Select Content DP (CU34G2)
HDMI1 (CU34G2X)
Size Small, Middle, Large Small
Position Right-Up /Right-Down / Left-Down /
Left-Up Right-Up
Audio On / Off Off
Swap Swap the screen source.
CU34G2:
Sub Main HDMI1 HDMI2 DP
HDMI1 X X V
HDMI2 X X V
DP V V X
18
Game Setting
ExitExtra
Luminance Color Setup
Game Mode Off
Shadow Control
Picture Boost
Low Input Lag On
OSD Setup PIP Setting
PIP
Game Setting
50 LowBlue Mode
Overdrive Off
Off
Game Color 10
MBR
Adaptive-Sync
Off
Frame Counter
On
0
Game Mode
Off No optimization by Smart image
game
FPS
For playing FPS (rst Person Shoot-
ers) games. Improves dark theme
black level details.
RTS For playing RTS (Real Time Strate-
gy). Improves the image quality.
Racing
For playing Racing games, Provides
fastest response time and high color
saturation.
Gamer1 User’s preference settings saved as
Gamer 1.
Gamer2 User’s preference settings saved as
Gamer 2.
Gamer3 User’s preference settings saved as
Gamer 3.
Shadow Control 0-100
Shadow Control Default is 50, then
end-user can adjust from 50 to 100
or 0 to increase contrast for clear
picture.
1. If picture is too dark to be saw
the detail clearly, adjusting from
50 to100 for clear picture.
2. If picture is too white to be saw
the detail clearly, adjusting from
50 to 0 for clear picture.
Low input Lag On/Off Turn off frame buffer to decrease
input lag
Game Color 0-20
Game Color will provide 0-20 level
for adjusting saturation to get better
picture.
LowBlue Mode Reading / Ofce / Internet /
Multimedia / Off
Decrease blue light wave by
controlling color temperature.
Overdrive
Weak
Adjust the response time.
(Boost can only enable in Freesync
off mode)
Medium
Strong
Boost (Motion picture response time
1ms)
Off
Frame Counter
(CU34G2X)
Off / Right-Up / Right-Down / Left-
Down / Left-Up Display vertical scanning frequency
MBR 0-20
MBR (Motion Blur Reduction) will
provide 0 – 20 levels for adjusting
visible motion blur.
Adaptive-Sync On/Off Adjust the Adaptive-Sync
19
Extra
Picture Boost OSD SetupExit
Luminance Color Setup
Image Ratio Wide
Input Select Auto
Off Timer 00
DDC/CI Yes
Reset No
Resolution : 960(H)X720(V) SDR
H. Frequency : 56 KHz
V. Frequency : 75 Hz
Extra
PIP Setting
PIP
Game Setting
USB No
Input Select Select Input Signal Source
Auto Cong. Yes or No Auto adjust the picture to default
Off timer 0-24hrs Select DC off time
Image Ratio
Wide / 4:3 / 1:1 / 17”(4:3) / 19”(4:3) /
19”(5:4) / 19”w(16:10) / 21.5”w(16:9) /
22”w(16:10) / 23”w(16:9) / 23.6”W (16:9) /
24”W (16:9) / 27”W (16:9)
Select image ratio for display.
DDC/CI Yes or No Turn ON/OFF DDC/CI Support
Reset Yes or No Reset the menu to default
USB
(CU34G2) On/Off
20
Exit
Exit Luminance
Color Setup Picture Boost OSD Setup ExtraPIP Setting
PIP
Game Setting
Exit Exit the main OSD
21
LED Indicator
Status LED Color
Full Power Mode White
Active-off Mode Orange
22
Troubleshoot
Problem & Question Possible Solutions
Power LED Is Not ON Make sure the power button is ON and the Power Cord is properly
connected to a grounded power outlet and to the monitor.
No images on the screen
Is the power cord connected properly?
Check the power cord connection and power supply.
Is the cable connected correctly?
(Connected using the HDMI cable)
Check the HDMI cable connection.
(Connected using the DP cable)
Check the DP cable connection.
* HDMI/DP input is not available on every model.
If the power is on, reboot the computer to see the initial screen (the login
screen), which can be seen.
If the initial screen (the login screen) appears, boot the computer in the
applicable mode (the safe mode for Windows 7/8/10) and then change the
frequency of the video card.
(Refer to the Setting the Optimal Resolution)
If the initial screen (the login screen) does not appear, contact the Service
Center or your dealer.
Can you see “Input Not Supported” on the screen?
You can see this message when the signal from the video card exceeds
the maximum resolution and frequency that the monitor can handle
properly.
Adjust the maximum resolution and frequency that the monitor can handle
properly.
Make sure the AOC Monitor Drivers are installed.
Picture Is Fuzzy & Has
Ghosting Shadowing Problem
Adjust the Contrast and Brightness Controls.
Press to auto adjust.
Make sure you are not using an extension cable or switch box. We
recommend plugging the monitor directly to the video card output connector
on the back.
Picture Bounces, Flickers Or
Wave Pattern Appears In The
Picture
Move electrical devices that may cause electrical interference as far away
from the monitor as possible.
Use the maximum refresh rate your monitor is capable of at the resolution
you are using.
Monitor Is Stuck In Active Off-
Mode”
The Computer Power Switch should be in the ON position.
The Computer Video Card should be snugly tted in its slot.
Make sure the monitor’s video cable is properly connected to the computer.
Inspect the monitor’s video cable and make sure no pin is bent.
Make sure your computer is operational by hitting the CAPS LOCK key on
the keyboard while observing the CAPS LOCK LED. The LED should either
turn ON or OFF after hitting the CAPS LOCK key.
Missing one of the primary
colors (RED, GREEN, or
BLUE)
Inspect the monitor’s video cable and make sure that no pin is damaged.
Make sure the monitor’s video cable is properly connected to the computer.
Picture has color defects
(white does not look white) Adjust RGB color or select desired color temperature.
Horizontal or vertical
disturbances on the screen
Use Windows 7/8/10 shut-down mode to adjust CLOCK and FOCUS.
Press to auto-adjust.
23
Specification
General Specification
Panel
Model name CU34G2 CU34G2X
Driving system TFT Color LCD
Viewable Image Size 86.36 cm diagonal
Pixel pitch 0.23175mm(H) x 0.23175mm(V)
Video HDMI lnterface & DP Interface
Display Color 16.7M Colors
Others
Horizontal scan range 30-160KHZ(HDMI/DP) 30-170KHZ(HDMI)
30-220KHZ(DP)
Horizontal scan Size(Maximum) 797.22mm
Vertical scan range 48-100HZ(HDMI/DP) 48-100HZ(HDMI)
48-144HZ(DP)
Vertical Scan Size(Maximum) 333.72mm
Optimal preset resolution 3440x1440@60Hz
Max resolution 3440x1440@100Hz
(HDMI/DP)
3440x1440@144Hz
(HDMI/DP)
Plug & Play VESA DDC2B/CI
Input Connector HDMI/DP
Power Source 100-240V~, 50/60Hz,1.5A
Power
Consumption
Typical (default
brightness and contrast) 55W 67W
Max. (brightness = 100,
contrast =100) 108W 110W
Power saving ≤0.5W ≤0.5W
Physical
Characteristics
Connector Type HDMI/DP/USB/Earphone out
Signal Cable Type Detachable
Environmental
Temperature Operating 0°~ 40°
Non-Operating -25°~ 55°
Humidity Operating 10% ~ 85% (non-condensing)
Non-Operating 5% ~ 93% (non-condensing)
Altitude Operating 0~ 5000m (0~ 16404ft )
Non-Operating 0~ 12192m (0~ 40000ft )
24
Preset Display Modes
STANDARD RESOLUTION HORIZONTAL
FREQUENCY(kHz)
VERTICAL
FREQUENCY(Hz)
VGA
640x480@60Hz 31.469 59.94
640x480@72Hz 37.861 72.809
640x480@75Hz 37.5 75
SVGA
800x600@60Hz 37.879 60.317
800x600@72Hz 48.077 72.188
800x600@75Hz 46.875 75
XGA
1024x768@60Hz 48.363 60.004
1024x768@70Hz 56.476 70.069
1024x768@75Hz 60.023 75.029
SXGA 1280x1024@60Hz 63.981 60.020
1280x1024@75Hz 79.976 75.025
WXGA+ 1440x900@60Hz 55.935 59.887
1440x900@60Hz 55.469 59.901
WSXGA 1680x1050@60Hz 65.290 59.954
1680x1050@60Hz 64.674 59.883
HD 1920x1080@60Hz 67.5 60
*** 1152x864@75HZ 67.5 75
1280x960@60HZ 60 60
QHD
2560x1080@60HZ 66 60
2560x1080@50HZ 56.25 50
2560x1080@120HZ 150 120
WQHD
3440x1440@30HZ 44.408 29.985
3440x1440@60HZ 89.819 59.973
3440x1440@100HZ 150.972 99.982
3440x1440@120HZ ONLY DP 181.2 120
3440x1440@144HZ ONLY DP 214.56 144
IBM MODES
DOS 640x350@70Hz 31.469 70.087
720x400@70Hz 31.469 70.087
MAC MODES
VGA 640x480@67Hz 35.000 66.667
SVGA 832x624@75Hz 49.725 74.551
XGA 1024x768@75Hz 60.241 74.927
25
Pin Assignments
Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name
1. TMDS Data 2+ 9. TMDS Data 0- 17. DDC/CEC Ground
2. TMDS Data 2 Shield 10. TMDS Clock + 18. +5V Power
3. TMDS Data 2- 11. TMDS Clock Shield 19. Hot Plug Detect
4. TMDS Data 1+ 12. TMDS Clock-
5. TMDS Data 1Shield 13. CEC
6. TMDS Data 1- 14. Reserved (N.C. on device)
7. TMDS Data 0+ 15. SCL
8. TMDS Data 0 Shield 16. SDA
20-Pin Color Display Signal Cable
Pin No. Signal Name Pin No. Signal Name
1 ML_Lane 3 (n) 11 GND
2 GND 12 ML_Lane 0 (p)
3 ML_Lane 3 (p) 13 CONFIG1
4 ML_Lane 2 (n) 14 CONFIG2
5 GND 15 AUX_CH(p)
6 ML_Lane 2 (p) 16 GND
7 ML_Lane 1 (n) 17 AUX_CH(n)
8 GND 18 Hot Plug Detect
9 ML_Lane 1 (p) 19 Return DP_PWR
10 ML_Lane 0 (n) 20 DP_PWR
26
Plug and Play
Plug & Play DDC2B Feature
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor
to inform the host system of its identity and, depending on the level of DDC used, communicate additional information
about its display capabilities.
The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the
DDC2B channel.