AOC I2379VHE User Manual
Displayed below is the user manual for I2379VHE by AOC which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
www.aoc.com
©2015 AOC. All Rights Reserved.
LCD Monitor User Manual
I2279VW / I2279VWHE / I2379V / I2379VHE
(LED
Backlight)
1
Safety ........................................................................................................................................................................ 4
National Conventions ......................................................................................................................................... 4
Power ................................................................................................................................................................ 5
Installation.......................................................................................................................................................... 6
Cleaning ............................................................................................................................................................ 7
Other .................................................................................................................................................................. 8
Setup ...................................................................................................................................................................... 9
Contents in Box ............................................................................................................................................... 9
Adjusting Viewing Angle ................................................................................................................................... 11
Connecting the Monitor .................................................................................................................................... 12
Adjusting ................................................................................................................................................................. 13
Setting Optimal Resolution .............................................................................................................................. 13
Windows 8 ................................................................................................................................................ 13
Windows Vista .......................................................................................................................................... 17
Windows XP ............................................................................................................................................. 19
Windows ME/2000 .................................................................................................................................... 20
Hotkeys ............................................................................................................................................................ 21
OSD Setting ..................................................................................................................................................... 23
Luminance ................................................................................................................................................ 24
Image Setup ............................................................................................................................................. 26
Color Setup ............................................................................................................................................... 28
Picture Boost ............................................................................................................................................ 30
OSD Setup ............................................................................................................................................... 32
Extra ......................................................................................................................................................... 34
Exit ........................................................................................................................................................... 36
LED Indicator ................................................................................................................................................... 37
Driver ...................................................................................................................................................................... 38
Monitor Driver .................................................................................................................................................. 38
Windows 8 ................................................................................................................................................ 38
Windows 7 ................................................................................................................................................ 42
Windows Vista ..........................................................................................................................................46
Windows XP ............................................................................................................................................. 48
Windows 2000 .......................................................................................................................................... 51
Windows ME .............................................................................................................................................51
i-Menu .............................................................................................................................................................. 52
e-Saver ............................................................................................................................................................ 53
Screen+ ...........................................................................................................................................................54
Troubleshoot ...........................................................................................................................................................55
Specification ...........................................................................................................................................................57
General Specification (I2279VW/I2279VWHE) ............................................................................................... 57
Preset Display Modes ................................................................................................58
Pin Assignments ..............................................................................................................................................61
Plug and Play ................................................................................................................................................... 63
General Specification ................................................................................................. 59
Preset Display Modes ..................................................................................................... 60
Windows 7 ................................................................................................................................................ 15
(I2279VW/I2279VWHE)
(I2379V/I2379VHE).......
(I2379V/I2379VHE)..
Setup Stand &Base.......................................................................................................................................... 10
2
..
..
Regulation ............................................................................................................................................................... 64
FCC Notice ...................................................................................................................................................... 64
WEEE Declaration ........................................................................................................................................... 65
EPA Energy Star ..............................................................................................................................................66
Service ....................................................................................................................................................................67
WEEE Declaration for India ............................................................................................................................. 65
Warranty Statement for Europe .......................................................................................................................67
Warranty Statement for Middle East and Africa (MEA) ....................................................................................69
RoHS Declaration for India ............................................................................................................................. .65
AOC International (Europe) B.V. ......................................................................................................................71
Warranty Statement for North & South America (excluding Brazil) ...........................................................
......72
3
Safety
National Conventions
The following subsections describe notational conventions used in this document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.
These blocks are notes, cautions, and warnings, and they are used as follows:
NOTE: A NOTE indicates important information that helps you make better use of your computer system.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some
warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific
presentation of the warning is mandated by regulatory authority.
4
Power
The monitor should be operated only from the type of power source indicated on the label. If you are not sure
of the type of power supplied to your home, consult your dealer or local power company.
Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect
the monitor from damage due to power surges.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate
configured receptacles marked between 100 - 240V ~, Min. 5A
The wall socket shall be installed near the equipment and shall be easily accessible.
For use only with the attached power adapter which have CE,UL,CSA listed license (Only for
monitors with power adapter).
Manufacturer:
SHENZHEN HONOR ELECTRONIC CO., LTD
ADS-25FSG-19 19025GPCN： Output: 19VDC， 1.31A；
TPV ELECTRONICS (FUJIAN) CO., LTD
ADPC1925EX：
Output: 19VDC， 1.31A；
5
Installation
Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a
person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by
the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and
use mounting accessories recommended by the manufacturer. A product and cart combination should be moved
with care.
Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire or
electric shock. Never spill liquids on the monitor.
Do not place the front of the product on the floor.
Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence
overheating may cause a fire or damage to the monitor.
See below the recommended ventilation areas around the monitor when the monitor is installed on the stand:
6
Cleaning
Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of
strong-detergent which will cauterize the product cabinet.
When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough
as it will scratch the screen surface.
Please disconnect the power cord before cleaning the product.
7
Other
If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and
contact a Service Center.
Make sure that the ventilating openings are not blocked by a table or curtain.
Do not engage the LCD monitor in severe vibration or high impact conditions during operation.
Do not knock or drop the monitor during operation or transportation.
For display with glossy bezel the user should consider the placement of the display as the bezel may cause
disturbing reflections from surrounding light and bright surfaces.
If the phone on the base of LCD monitor when the phone calls will affect the circuit characteristics, may
cause the screen to mute or screen interference.
8
Setup
Contents in Box
Not all signal cables (Power,Analog,DVI,HDMI ) will be provided for all countries and regions.
Please check with the local dealer or AOC branch office for confirmation.
*
DVI Cable
*
Power Cable
Monitor
Base
Analog Cable
*
*
or
CD Manual
9
Setup Stand & Base
Please setup or remove the base following the steps as below.
Setup:
Remove:
10
Adjusting Viewing Angle
For optimal viewing, it is recommended to look at the full face of the monitor, and then adjust the monitor's angle to
your own preference.
Hold the stand so you will not topple the monitor when you change the monitor's angle.
You are able to adjust the monitor's angle as below.
NOTE:
523
11
Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.
Do not adjust the viewing angle over 23 degrees in order to avoid damage.
Do not put your hand close to the gap between the monitor and the base to avoid the injury when adjusting the
viewing angle.
Connecting the Monitor
Cable Connections In Back of Monitor and Computer:
1. DC port
2.
3.
D-SUB
4.
HDMI
To protect equipment, always turn off the PC and LCD monitor before connecting.
If your monitor displays an image, installation is complete. If it does not display an image, please refer
Troubleshooting.
1. Connect the power cable to the DC port on the back of the monitor.
2. Turn on your monitor and computer.
3.
4.
Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the
computer's D-Sub port.
(Optional—Requires a video card with HDMI port）-Connect one end of the HDMI cable to the back of the monitor and
connect the other end to the computer’s HDMI port.
DVI
(Optional –Requires a video card with DVI port)Connect one end of the DVI cable to the back of the monitor and connect
the other end to the computer’s DVI port.
I2279VW/I2379V I2279VWHE/I2379VHE
5.
1
23
1
2
12
Adjusting
Setting Optimal Resolution
Windows 8
For Windows 8:
1. Right click and click All apps at the bottom-right of the screen.
2. Set the “View by” to “Category”.
3. Click Appearance and Personalization.
13
4. Click DISPLAY.
5. SettheresolutionSLIDE-BARtoOptimalpresetresolution
14
Windows 7
For Windows 7:
1. Click START.
2. Click CONTROL PANEL.
3. Click APPEARANCE.
4. Click DISPLAY
15
5. Set the resolution SLIDE-BAR to Optimal preset resolution.
16
Windows Vista
For Windows Vista:
1 Click START.
2 Click CONTROL PANEL.
3 Click Appearance and Personalization.
4 Click Personalization
17
5 Click Display Settings.
6 Set the resolution SLIDE-BAR to Optimal preset resolution
18
Windo
w
For Win
d
1 Click S
T
2 Click S
E
3 Click C
O
4 Click A
p
5 Double
w
s XP
d
ows XP:
T
ART.
E
TTINGS.
O
NTROL PA
N
p
pearance a
n
click DISPL
AY
N
EL.
n
d Themes.
AY
.
19
6 Click S
E
7 Set the
Windo
w
For Win
d
1 Click S
T
2 Click S
E
3 Click C
O
4 Double
5 Click S
E
6 Set the
E
TTINGS.
resolution S
L
w
s ME/20
0
d
ows ME/200
0
T
ART.
E
TTINGS.
O
NTROL PA
N
click DISPL
AY
E
TTINGS.
resolution S
L
L
IDE-BAR to
O
0
0
0
:
N
EL.
AY
.
L
IDE-BAR to
O
O
ptimal prese
t
O
ptimal prese
t
t
resolution
t
resolution
20
Hotkeys
1 Source/ Auto/ Exit
2 Clear Vision /<
3
4 Menu/Enter
5 Power
Power
Press the Power button to turn on/off the monitor.
Auto / Exit
When there is no OSD, press Auto / Exit button continuously about 2 second to do auto configure.
Source hot key
When the OSD is closed, press Source button will be Source hot key function. Press Source button to select
the input source showed in the message bar , press Menu/Enter button to change to the source selected.
Widescreen / 4:3 switch />
1 2 3 4 5
4:3 or wide image ratio / >
When there is no OSD, press > hotkey continuously to change 4:3 or wide image ratio. (If the product screen size
is 4:3 or input signal resolution is wide format, the hot key is disable to adjust. )
21
Clear Vision
1. When there is no OSD, Press the “<” button to activate Clear Vision.
2. Use the “<” or “>” buttons to select between weak, medium, strong, or off settings. Default setting is always
“off”.
3. Press and hold “<” button for 5 seconds to activate the Clear Vision Demo, and a message of “Clear Vision
Demo: on” will be display on the screen for a duration of 5 seconds. Press Menu or Exit button, the message
will disappear. Press and hold “<” button for 5 seconds again, Clear Vision Demo will be off.
Clear Vision function provides the best image viewing experience by converting low resolution and blurry images
into clear and vivid images.
22
Clear Vision
Adjust the Clear Vision
Weak
Medium
Strong
Clear Vision Demo
on or off
Disable or Enable Demo
Medium
Strong
Off
Weak
OSD Setting
Basic and simple instruction on the control keys.
1. Press the MENU-button to activate the OSD window.
2. Press < or > to navigate through the functions. Once the desired function is highlighted, press the
MENU-button to activate. Press < or > to navigate through the sub-menu. Once the desired function is
highlighted, press MENU-button to activate.
3. Press < or > to change the settings of the selected function. Press AUTO to exit. If you want to adjust any
other function, repeat steps 2-3.
4. OSD Lock Function: To lock the OSD, press and hold the MENU-button while the monitor is off and then
press power-button to turn the monitor on. To un-lock the OSD, press and hold the MENU-button while
the monitor is off and then press power-button to turn the monitor on.
Notes:
1. If the product has only one signal input, the item of "Input Select" is disabled.
2. If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is disabled.
3. One of Clear vision, DCR, Color Boost, and Picture Boost functions is activated; the other three functions are
turned off accordingly.
23
Luminance
1 Press (Menu) to display menu.
2 Press < or > to select (Luminance), and press to enter.
to enter.
3 Press < or > to select submenu, and press
24
5 Press to exit.
4 Press < or > to adjust.
Brightness 0-100 Backlight Adjustment.
Contrast 0-100 Contrast from Digital-register.
Eco mode
Standard Standard Mode.
Text Text Mode.
Internet Internet Mode.
Game Game Mode.
Movie Movie Mode.
Sports Sports Mode.
Gamma
Gamma1 Adjust to Gamma 1.
Gamma2 Adjust to Gamma 2.
Gamma3 Adjust to Gamma 3.
DCR
Off Disable dynamic contrast ratio.
On Enable dynamic contrast ratio.
25
Image Setup
1 Press (Menu) to display menu.
2 Press < or > to select (Image Setup), and press to enter.
3 Press < or > to select submenu, and press to enter.
26
Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise.
Phase 0-100 Adjust Picture Phase to reduce Horizontal-Line noise.
Sharpness 0-100 Adjust picture sharpness.
H.Position 0-100 Adjust the horizontal position of the picture.
V.Position 0-100 Adjust the vertical position of the picture.
4 Press < or > to adjust.
5 Press to exit.
27
Color Setup
1 Press (Menu) to display menu.
2 Press < or > to select (Color Setup), and press to enter.
3 Press < or > to select submenu, and press to enter.
28
Color setup.
Warm Recall Warm Color Temperature from EEPROM.
Normal Recall Normal Color Temperature from EEPROM.
Cool Recall Cool Color Temperature from EEPROM.
sRGB Recall SRGB Color Temperature from EEPROM.
User
Red Red Gain from Digital-register.
Green Green Gain Digital-register.
Blue Blue Gain from Digital-register.
DCB Mode
Full Enhance on or off Disable or Enable Full Enhance Mode.
Nature Skin on or off Disable or Enable Nature Skin Mode.
Green Field on or off Disable or Enable Green Field Mode.
Sky-blue on or off Disable or Enable Sky-blue Mode.
AutoDetect on or off Disable or Enable AutoDetect Mode.
DCB Demo on or off Disable or Enable Demo.
4 Press < or > to adjust.
5 Press to exit.
29
Picture Boost
1 Press (Menu) to display menu.
2 Press < or > to select (Picture Boost), and press to enter.
3 Press < or > to select submenu, and press to enter.
30
Frame Size 14-100 Adjust Frame Size.
Brightness 0-100 Adjust Frame Brightness.
Contrast 0-100 Adjust Frame Contrast.
H. position 0-100 Adjust Frame horizontal position.
V. position 0-100 Adjust Frame vertical position.
Bright Frame on or off Disable or Enable Bright Frame.
4 Press < or > to adjust.
5 Press to exit
31
OSD Setup
1 Press (Menu) to display menu.
2 Press < or > to select (OSD Setup), and press to enter.
3 Press < or > to select submenu, and press to enter.
32
H. Position 0-100 Adjust the horizontal position of OSD.
V. Position 0-100 Adjust the vertical position of OSD.
Timeout 5-120 Adjust the OSD Timeout.
Transparence 0-100 Adjust the transparence of OSD.
Language Select the OSD language.
Break Reminder on or off
Disable or Enable
(1 hour of work, break ?) /
(2 hours of work, break ?)
4 Press < or > to adjust.
5 Press to exit.
33
Extra
1 Press (Menu) to display menu.
2 Press < or > to select (Extra), and press to enter.
to enter. 3 Press < or > to select submenu, and press
34
4 Press < or > to adjust.
5 Press to exit.
Input Select Auto / D-SUB /DVI Select input signal source.
(I2279VW/I2379V)
Input Select Auto / /HDMI
Off timer 0-24hrs Select DC off time.
Image Ratio wide or 4:3 Select wide or 4:3 format for display.
DDC-CI yes or no Turn ON/OFF DDC-CI Support.
Reset yes or no Reset the menu to default.
Information Show the information of the main image
and sub-image source.
Select input signal source.
(I2279VWHE/I2379VHE)
D-SUB
35
Exit
1 Press (Menu) to display menu.
2 Press < or > to select (Exit), and press to enter.
Exit Exit the main OSD.
3 Press AUTO to exit.
36
LED Indicator
Status LED Color
Full Power Mode White
Active-off Mode Orange
37
Driver
Monitor Driver
Windows 8
1. Start Windows® 8
2. Right click and click All apps at the bottom-right of the screen.
3. Click on the “Control panel” icon
4. Set the “View by” to “Large icons” or “Small icons”.
38
5. Click on the “Display” icon.
6. Click on the “Change display settings” button.
7. Click the
“Advanced Settings” button.
39
9. Click the “Driver” tab.
10. Open the “Update Driver Software-Generic PnP Monitor” window by clicking on “Update Driver... “ and
then click the "Browse my computer for driver software" button.
8. Click the “Monitor” tab and then click the “Properties” button.
40
12. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory:
X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive).
13. Select the "xxx.inf" file and click the “Open” button. Click the “OK” button.
14. Select your monitor model and click the “Next” button. The files will be copied from the CD to your hard disk
drive.
15. Close all open windows and remove the CD.
16. Restart the system. The system will automatically select the maximum refresh rate and corresponding Color
Matching Profiles.
11. Select "Let me pick from a list of device drivers on my computer".
41
Windows 7
1. Start Windows® 7
2. Click on the 'Start' button and then click on 'Control Panel'.
3. Click on the 'Display' icon.
42
4. Click on the “Change display settings” button.
5. Click the “Advanced Settings” button.
6. Click the “Monitor” tab and then click the “Properties” button.
43
7. Click the “Driver” tab.
8. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on “Update Driver... “ and then
click the "Browse my computer for driver software" button.
9. Select "Let me pick from a list of device drivers on my computer".
44
10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory:
X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive).
11. Select the "xxx.inf" file and click the “Open” button. Click the “OK” button.
12. Select your monitor model and click the “Next” button. The files will be copied from the CD to your hard disk
drive.
13. Close all open windows and remove the CD.
14. Restart the system. The system will automatically select the maximum refresh rate and corresponding Color
Matching Profiles.
45
Windows Vista
1. Click "Start" and "Control Panel". Then, double-click on "Appearance and Personalization".
2. Click "Personalization" and then "Display Settings".
3. Click "Advanced Settings...".
46
4. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for
your monitor is completed. The monitor can be used as is.
If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue".
5. Click "Update Driver..." in the "Driver" tab.
6. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device
drivers on my computer".
7. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive
F:\Driver (CD-ROM Drive).
8. Select your monitor model and click on the 'Next' button.
9. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence.
47
Windo
w
1. Start
2. Click
3. Sele
c
4. Click
w
s XP
Windows® X
on the 'Start'
c
t and click o
n
on the 'Displ
a
P
button and th
n
the categor
y
a
y' Item.
en click on 'C
o
y
‘Appearance
o
ntrol Panel'.
and Themes’
48
5. Sele
c
6. Sele
c
-
-
Ple
a
7. Click
c
t the 'Setting
s
c
t 'Monitor' ta
b
If the 'Prope
r
If the 'Prope
r
a
se follow th
e
on the 'Drive
r
s
' tab then cli
c
b
r
ties' button is
r
ties' button i
s
e
steps below.
r
' tab and the
n
c
k on the 'Adv
inactive, it m
e
s
active, click
o
n
click on 'Up
d
anced' button
e
ans your mo
n
o
n 'Properties
'
d
ate Driver...'
b
.
n
itor is proper
l
'
button.
b
utton.
l
y configured. Please stop i
n
n
stallation.
49
8. Sele
c
9. Sele
c
10. Click
(CD-
11. Click
12. Sele
c
-
13. Click
14. Click
c
t the 'Install f
c
t the 'Don't S
on the 'Have
ROM Drive).
on the 'Open
c
t your monit
o
If you can s
e
message, pl
e
on the 'Finis
h
on the 'OK' b
rom a list or s
earch. I will c
h
disk...' button
' button, then
o
r model and
c
e
e the 'has no
t
e
ase click on
h
' button then
utton and the
n
pecific locatio
h
oose the dri
v
, then click o
n
click the 'OK'
c
lick on the 'N
e
t
passed Win
d
the 'Continue
the 'Close' bu
n
the 'OK' but
t
n [advanced]'
v
er to install' r
a
n
the 'Browse.
button.
e
xt' button.
d
ows® Logo t
e
Anyway' butt
o
tton.
t
on again to c
radio button
a
a
dio button. T
h
..' button and
e
sting to verif
y
o
n.
lose the Displ
a
nd then click
h
en click on t
h
then select th
y
its compatib
ay Properties
on the 'Next'
h
e 'Next' butt
o
e appropriate
ility with Win
d
dialog box.
button.
o
n.
drive F:
ows® XP'
50
Windows 2000
1. Start Windows® 2000
2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.
3. Double click on the 'Display' Icon.
4. Select the 'Settings' tab then click on 'Advanced...'.
5. Select 'Monitor'
- If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation.
- If the 'Properties' button is active. Click on 'Properties' button. Please follow the steps given below.
6. Click on 'Driver' and then click on 'Update Driver...' then click on the 'Next' button.
7. Select 'Display a list of the known drivers for this device so that I can choose a specific driver', then click on
'Next' and then click on 'Have disk...'.
8. Click on the 'Browse...' button then select the appropriate drive F: ( CD-ROM Drive).
9. Click on the 'Open' button, then click on the 'OK' button.
10. Select your monitor model and click on the 'Next' button.
11. Click on the 'Finish' button then the 'Close' button.
If you can see the 'Digital Signature Not Found' window, click on the 'Yes' button.
Windows ME
1. Start Windows® Me
2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.
3. Double click on the 'Display' Icon.
4. Select the 'Settings' tab then click on 'Advanced...'.
5. Select the 'Monitor' button, then click on 'Change...' button.
6. Select 'Specify the location of the driver(Advanced)' and click on the 'Next' button.
7. Select 'Display a list of all the drivers in a specific location, so you can choose the driver you want', then click
on 'Next' and then click on 'Have Disk...'.
8. Click on the 'Browse...' button, select the appropriate drive F: ( CD-ROM Drive) then click on the 'OK' button.
9. Click on the 'OK' button, select your monitor model and click on the 'Next' button.
10. Click on 'Finish' button then the 'Close' button.
51
i-Me
n
Welcome
screen m
e
guide.The software Supported operating systems: Windows 7, Windows Vista, Windows XP.
n
u
to “i-Menu” s
o
e
nus instead
o
o
ftware by A
O
o
f the OSD b
u
O
C. i-Menu m
a
u
tton on the
m
a
kes it easy t
o
m
onitor. To co
m
o
adjust your
m
m
plete installa
t
m
onitor displa
y
t
ion, please f
o
y
setting by u
s
o
llow the insta
s
ing on
llation
52
e-Saver
Welcome to use AOC e-Saver monitor power management software! The AOC e-Saver features Smart Shutdown
functions for your monitors, allows your monitor to timely shutdown when PC unit is at any status (On, Off, Sleep or
Screen Saver); the actual shutdown time depends on your preferences (see example below).
Please click on "driver/e-Saver/setup.exe" to start installing the e-Saver software, follow the install wizard to
complete software installation.The software Supported operating systems: Windows 7, Windows Vista, Windows
XP.
Under each of the four PC status, you may choose from the pull-down menu the desired time (in minutes)you’re
your monitor to automatically shutdown. The example above illustrated:
1. The monitor will never shutdown when the PC is powered on.
2. The monitor will automatically shutdown 5 minutes after the PC is powered off.
3. The monitor will automatically shutdown 10 minutes after the PC is in sleep/stand-by mode.
4. The monitor will automatically shutdown 20 minutes after the screen saver appears.
You can click “RESET” to set the e-Saver to its default settings like below.
53
Screen+
Welcome to "Screen+" software by AOC. Screen+ software is a desktop screen splitting tool; it splits the desktop
into different panels, and each panel displays a different window. You only need to drag the window to a
corresponding pane, when you want to access it. It supports multiple monitor display to make your task easier.
Please follow the installation software to install it.The software Supported operating systems: Windows 8,
Windows 7, Windows Vista, Windows XP.
54
Troubleshoot
Problem & Question Possible Solutions
Power LED Is Not ON Make sure the power button is ON and the Power Cord is properly connected
to a grounded power outlet and to the monitor.
No images on the screen
Is the power cord connected properly?
Check the power cord connection and power supply.
Is the cable connected correctly?
(Connected using the D-sub cable)
Check the DB-15 cable connection.
(Connected using the DVI cable)
Check the DVI cable connection.
* DVI input is not available on every model.
(Connected using the HDMI cable)
Check the HDMI cable connection.
* HDMI input is not available on every model.
If the power is on, reboot the computer to see the initial screen (the login
screen), which can be seen.
If the initial screen (the login screen) appears, boot the computer in the
applicable mode (the safe mode for Windows ME/XP/2000) and then change
the frequency of the video card.
(Refer to the Setting the Optimal Resolution)
If the initial screen (the login screen) does not appear, contact the Service
Center or your dealer.
Can you see "Input Not Supported" on the screen?
You can see this message when the signal from the video card exceeds the
maximum resolution and frequency that the monitor can handle properly.
Adjust the maximum resolution and frequency that the monitor can handle
properly.
Make sure the AOC Monitor Drivers are installed.
Picture Is Fuzzy & Has
Ghosting Shadowing Problem
Adjust the Contrast and Brightness Controls.
Press for auto adjust.
Make sure you are not using an extension cable or switch box. We
recommend plugging the monitor directly to the video card output connector
on the back.
55
Picture Bounces, Flickers Or
Wave Pattern Appears In The
Picture
Move electrical devices that may cause electrical interference as far away
from the monitor as possible.
Use the maximum refresh rate your monitor is capable of at the resolution
you are using.
Monitor Is Stuck In Active
Off-Mode"
The Computer Power Switch should be in the ON position.
The Computer Video Card should be snugly fitted in its slot.
Make sure the monitor's video cable is properly connected to the computer.
Inspect the monitor's video cable and make sure no pin is bent.
Make sure your computer is operational by hitting the CAPS LOCK key on
the keyboard while observing the CAPS LOCK LED. The LED should either
turn ON or OFF after hitting the CAPS LOCK key.
Missing one of the primary
colors (RED, GREEN, or
BLUE)
Inspect the monitor's video cable and make sure that no pin is damaged.
Make sure the monitor's video cable is properly connected to the computer.
Screen image is not centered
or sized properly Adjust H-Position and V-Position or press hot-key (AUTO).
Picture has color defects
(white does not look white) Adjust RGB color or select desired color temperature.
Horizontal or vertical
disturbances on the screen
Use Windows 95/98/2000/ME/XP shut-down mode Adjust CLOCK and
Phase.Press to auto-adjust.
56
Specification
General Specification
Panel
I2279VW/I2279VWHE
Model name
Driving system TFT Color LCD
54.61cm diagonal
Viewable Image Size
Pixel pitch 0.08265*RGB(H)mm x 0.24795(V) mm
Video R, G, B Analog lnterface &DVI lnterface (I2279VW)
Separate Sync. H/V TTL
Display Color 16.7M Colors
Pixel Clock 148.5MHz
Others
Horizontal scan range 30kHz - 83kHz
Horizontal scan Size(Maximum) 477 mm
Vertical scan range 50Hz - 76 Hz
Vertical scan Size(Maximum) 268 mm
Optimal preset resolution 1920x1080@60Hz
Plug & Play VESA DDC2B/CI
Input Connector
Input Video Signal Analog: 0.7Vp-p(standard), 75 OHM, TMDS
Power Source 19VDC, 1.31A
Power Consumption
Off timer 0-24 hrs
Physical
Characteristics
VGA /DVI (I2279VW); VGA /HDMI (I2279VWHE) Connector Type
Detachable
Signal Cable Type
Environmental
Temperature: Operating 0° C 40°C
Non-Operating -20°C 60
°C
Humidity:
Operating 20% 90%
(non-condensing)
Non-Operating 15% 90% (non-condensing)
Altitude:
Operating
Non-Operating
0~ 5000m (0~ 16404 ft )
0~ 12192m (0~ 40000 ft )
Typical (brightness = 90, contrast= 50 )
≤ 0. 5 W
19W (I2279VW)
22W (I2279VWHE)
(brightness = 100, contras t = 100)
Power Saving
22W (I2279VW)
24W (I2279VWHE)
VGA /DVI (I2279VW); VGA /HDMI (I2279VWHE)
R, G, B Analog lnterface &HDMI lnterface (I2279VWHE)
（I2279VW/I2279VWHE）
57
Preset Display Modes
STANDARD RESOLUTION HORIZONTAL
FREQUENCY(kHZ)
VERTICAL
FREQUENCY(Hz)
VGA 640×480@60Hz 31.469 59.940
VGA 640×480@72Hz 37.861 72.809
VGA 640×480@75Hz 37.500 75.000
Dos-mode 720×400@70Hz 31.469 70.087
SVGA 800×600@60Hz 37.879 60.317
SVGA 800×600@72Hz 48.077 72.188
SVGA 800×600@75Hz 46.875 75.000
SVGA 49.725 74.551
XGA 48.363 60.004
XGA 56.476 70.069
XGA 60.023 75.029
*** 60.000 60.000
SXGA 63.981 60.020
79.976 75.025
55.935 59.887
65.290 59.954
VGA 640×480@67Hz 35.000 66.667
SVGA 800×600@56Hz 35.156 56.250
67.500 60.000
SXGA
WXGA+
WSXGA
FHD
832×624@75Hz
1024×768@60Hz
1024×768@70Hz
1024×768@75Hz
1280×960@60Hz
1280×1024@60Hz
1280×1024@75Hz
1440×900@60Hz
1680×1050@60Hz
1920×1080@60Hz
HDMI timing (I2279VWHE)
（I2279VW/I2279VWHE）
Format Resolution Vertical frequency
480p 640x480 60Hz
480p 720x480 60Hz
576p 720x576 50Hz
720p 1280x720 50Hz,60Hz
1080p 1920x1080 50Hz,60Hz
58
Panel
I2379V/I2379VHE
Model name
Driving system TFT Color LCD
58.42cm diagonal
Viewable Image Size
Pixel pitch 0.0884*RGB(H) mm x 0.2652(V) mm
Video R, G, B Analog lnterface &DVI lnterface (I2379V)
Separate Sync. H/V TTL
Display Color 16.7M Colors
Pixel Clock 148.5MHz
Others
Horizontal scan range 30kHz - 83kHz
Horizontal scan Size(Maximum) 509 mm
Vertical scan range 50Hz - 76 Hz
Vertical scan Size(Maximum) 286 mm
Optimal preset resolution 1920x1080@60Hz
Plug & Play VESA DDC2B/CI
Input Connector
Input Video Signal Analog: 0.7Vp-p(standard), 75 OHM, TMDS
Power Source 19VDC, 1.31A
Power Consumption
Off timer 0-24 hrs
Physical
Characteristics
VGA /DVI (I2379V); VGA /HDMI (I2379VHE) Connector Type
Detachable
Signal Cable Type
Environmental
Temperature: Operating 0° C 40°C
Non-Operating -20°C 60
°C
Humidity:
Operating 20% 90%
(non-condensing)
Non-Operating 15% 90% (non-condensing)
Altitude:
Operating
Non-Operating
0~ 5000m (0~ 16404 ft )
0~ 12192m (0~ 40000 ft )
Typical (brightness = 90, contrast = 50 )
≤ 0. 5 W
19W(I2379V)
23W(I2379VHE)
(brightness = 100, contr ast = 100)
Power Saving
22W(I2379V)
25W(I2379VHE)
VGA /DVI (I2379V); VGA /HDMI (I2379VHE)
General Specification
R, G, B Analog lnterface &HDMI lnterface (I2379VHE)
（I2379V/I2379VHE）
59
Preset Display Modes
HDMI timing (I2379VHE)
STANDARD RESOLUTION HORIZONTAL
FREQUENCY(kHZ)
VERTICAL
FREQUENCY(Hz)
VGA 640×480@60Hz 31.469 59.940
VGA 640×480@72Hz 37.861 72.809
VGA 640×480@75Hz 37.500 75.000
Dos-mode 720×400@70Hz 31.469 70.087
SVGA 800×600@60Hz 37.879 60.317
SVGA 800×600@72Hz 48.077 72.188
SVGA 800×600@75Hz 46.875 75.000
SVGA 49.725 74.551
XGA 48.363 60.004
XGA 56.476 70.069
XGA 60.023 75.029
*** 60.000 60.000
SXGA 63.981 60.020
79.976 75.025
55.935 59.887
65.290 59.954
VGA 640×480@67Hz 35.000 66.667
SVGA 800×600@56Hz 35.156 56.250
67.500 60.000
SXGA
WXGA+
WSXGA
FHD
832×624@75Hz
1024×768@60Hz
1024×768@70Hz
1024×768@75Hz
1280×960@60Hz
1280×1024@60Hz
1280×1024@75Hz
1440×900@60Hz
1680×1050@60Hz
1920×1080@60Hz
（I2379V/I2379VHE）
Format Resolution Vertical frequency
480p 640x480 60Hz
480p 720x480 60Hz
576p 720x576 50Hz
720p 1280x720 50Hz,60Hz
1080p 1920x1080 50Hz,60Hz
60
Pin Assignments
Pin Number 15-Pin Side of the
Signal Cable Pin Number 15-Pin Side of the
Signal Cable
1 Video-Red 9 +5V
2 Video-Green 10 Ground
3 Video-Blue 11 N.C.
4 N.C. 12 DDC-Serial data
5 Detect Cable 13 H-sync
6 GND-R 14 V-sync
7 GND-G 15 DDC-Serial clock
8 GND-B
24-Pin Color Display Signal Cable
Pin Number 24-Pin Color Display Signal
Cable Pin Number 24-Pin Color Display Signal
Cable
1 TMDS data 2－ 13 TMDS data 3＋
2 TMDS data 2＋ 14 ＋5V Power
3 TMDS data 2/4 Shield 15 Ground (for+5V)
4 TMDS data 4－ 16 Hot Plug Detect
5 TMDS data 4＋ 17 TMDS data 0－
6 DDC Clock 18 TMDS data 0＋
7 DDC Data 19 TMDS data 0/5 Shield
8 N.C. 20 TMDS data 5－
9 TMDS data 1－ 21 TMDS data 5＋
10 TMDS data 1＋ 22 TMDS Clock Shield
11 TMDS data 1/3 Shield 23 TMDS Clock +
12 TMDS data 3－ 24 TMDS Clock －
15-Pin Color Display Signal Cable
/N.C.
/N.C.
/N.C.
/N.C.
/N.C.
/N.C.
61
Pin No.
1
2
3
4
5
6
7
8
Signal N
a
TMDS Dat
a
TMDS Dat
a
TMDS Data
TMDS Dat
a
TMDS Dat
a
TMDS Data
TMDS Dat
a
TMDS Dat
a
a
me
a
2+
a
2 Shield
a 2-
a
1+
a
1Shield
a 1-
a
0+
a
0 Shield
Pin No.
9 T
10
T
11
T
12 T
13
C
14
R
15
S
16
S
Signal Nam
e
TMDS Data 0-
T
MDS Clock
+
T
MDS Clock
S
TMDS Clock-
C
EC
R
eserved (N.
C
S
CL
S
DA
e
+
S
hield
C
. on device
Pin No.
17
18
19
Signal Nam
e
DDC/CEC Gr
o
+5V Power
Hot Plug Det
e
e
o
und
e
ct
19 Pin Color Display Signal Cable
62
Plug and Play
Plug & Play DDC2B Feature
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the
monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional
information about its display capabilities.
The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over
the DDC2B channel.
63
Regulation
FCC Notice
FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS)
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTICE:
The changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this
equipment. It is the responsibilities of the user to correct such interference. It is the responsibility of the user to
correct such interference.
64
WEE
Disposal
o
This sym
b
househol
d
designat
e
and recy
c
that it is r
e
you can
d
disposal
s
E Decl
a
o
f Waste Equ
b
ol on the pro
d
waste. Inst
e
e
d collection p
c
ling of your
w
e
cycled in a
m
d
rop off your
w
s
ervice or the
a
ration
ipment by Us
e
duct or on its
e
ad, it is your
r
oint for the re
c
w
aste equipm
e
m
anner that p
r
w
aste equipm
e
shop where
y
e
rs in Private
packaging in
d
r
esponsibility
t
c
ycling of wa
s
e
nt at the time
r
otects human
e
nt for recycli
n
y
ou purchase
d
Household in
d
icates that th
i
t
o dispose of
y
s
te electrical
a
of disposal
w
health and t
h
n
g, please co
n
d
the product.
the Europea
n
i
s product mu
s
y
our waste e
q
a
nd electronic
w
ill help to con
s
h
e environme
n
n
tact your loc
a
n
Union.
s
t not be disp
o
q
uipment by h
a
equipment. T
s
erve natural
n
t. For more i
n
a
l city office, y
o
o
sed of with
y
a
nding it over
he separate
c
resources an
d
n
formation ab
o
o
ur househol
d
y
our other
to a
c
ollection
d
ensure
o
ut where
d
waste
WEEE Declaration IRU,QGLD
This symbol on the product or on its packaging indicates that this product must not be disposed of with
your other household waste. Instead it is your responsibility to dispose of your waste equipment by
handing it over to a designated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at the time of disposal will
help to conserve natural resources and ensure that it is recycled in a manner that protects human health
and the environment.
For more information about where you can drop off your waste equipment for recycling in India please
visit the below web link.
www.aocindia.com/ewaste.php.
We continue to monitor, influence and develop our processes to comply with upcoming proposed RoHS
type regulations, including but not limited to, Brazil, Argentina, Canada.
Restriction on Hazardous Substances statement (India)
This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding
0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the
Rule.
This product complies with all implemented RoHS type regulations worldwide, including but not limited
to, EU, Korea, Japan, US States (e.g. California), Ukraine, Serbia, Turkey, Vietnam and India.
5R+6'HFODUDWLRQIRU,QGLD
65
EPA Energy Star
ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR® Partner, AOC International (Europe) BV and
Envision Peripherals, Inc. have determined that this product meets the ENERGY STAR® guidelines for energy
efficiency.
(FOR EPA CERTIFIED MODELS)
66
Service
Warranty Statement for Europe
LIMITED THREE-YEAR WARRANTY*
For AOC LCD Monitors sold within Europe, AOC International (Europe) B.V. warrants this product to be free from
defects in material and workmanship for a period of Three (3) years after the original date of consumer purchase.
During this period, AOC International (Europe) B.V. will, at its option, either repair the defective product with new or
rebuilt parts, or replace it with a new or rebuilt product at no charge except as *stated below. In the absent of the
proof of purchase, the warranty will start 3 months after the date of manufacturing indicated on the product.
If the product appears to be defective, please contact your local dealer or refer to the service and support section
on www.aoc-europe.com for the warranty instructions in your country. The freight cost for the warranty is pre-paid
by AOC for the delivery and return. Please ensure you provide a dated proof of purchase along with the product
and deliver to the AOC Certified or Authorized Service Center under the following condition:
Make sure the LCD Monitor is packed in a proper carton box (AOC prefers the original carton box to
protects your monitor well enough during transport).
Put the RMA number on the address label
Put the RMA number on the shipping carton
AOC International (Europe) B.V. will pay the return shipping charges within one of the countries specified within this
warranty statement. AOC International (Europe) B.V. is not responsible for any costs associated with the
transportation of product across international borders. This includes the international border within the European
Union. If the LCD Monitor is not available for collection when the currier attends, you will be charged a collection
fee.
* This limited warranty does not cover any losses or damages that occur as a result of:
Damages during transport due to improper packaging
Improper installation or maintenance other then in accordance with AOC’s user manual
Misuse
Neglect
Any cause other than ordinary commercial or industrial application
Adjustment by non-authorized source
Repair, modification, or installation of options or parts by anyone other than an AOC Certified or
Authorized Service Center
Improper environments like humidity, water damage and dusts
Damaged by violence, earthquake and terrorist attacks
Excessive or inadequate heating or air conditioning or electrical powers failures, surges, or other
irregularities
This limited warranty does not cover any of the product firmware or hardware that you or any third party have
modified or altered; you bear the sole responsibility and liability for any such modifications or alteration.
67
All AOC LCD Monitors are produced according to the ISO 9241-307 Class 1 pixel policy standards.
If your warranty has expired, you still have access to all available service options, but you will be responsible for the
cost of service, including parts, labor, shipping (if any) and applicable taxes. AOC Certified or Authorized Service
Center will provide you with an estimate of service costs before receiving your authorization to perform service.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A
PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR FROM THE ORIGINAL DATE OF CONSUMER
PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD. AOC
INTERNATIONAL (EUROPE) B.V. OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE SOLELY AND
EXCULSIVELY AS STATED HERE. AOC INTERNATIONAL (EUROPE) B.V. LIABILITY, WHETHER BASED ON
CONTRACT, TORT, WARRANTY, STRICT LIABILITY, OR OTHER THEORY, SHALL NOT EXCEED THE PRICE
OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO EVENT
SHALL AOC INTERNATIONAL (EUROPE) B.V. BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE OR
FACILITIES OR EQUIPMENT, OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE. SOME
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS, WHICH MAY VARY FROM
COUNTRY TO COUNTRY. THIS LIMITED WARRANTY IS ONLY VALID FOR PRODUCTS PURCHASED IN THE
MEMBER COUNTRIES OF THE EUROPEAN UNION.
Information in this document is subject to change without notice. For more information, please visit:
http://www.aoc-europe.com
68
Warranty Statement for Middle East and Africa (MEA)
And
The Commonwealth of Independent States (CIS)
LIMITED ONE to THREE YEARS WARRANTY*
For AOC LCD Monitors sold within the Middle East and Africa (MEA) and the Commonwealth of Independent
States (CIS), AOC International (Europe) B.V. warrants this product to be free from defects in material and
workmanship for a period of One (1) to Three (3) years from the manufacture date depending on sale country.
During this period, AOC International (Europe) B.V. offers a Carry-In (return to Service Center) Warranty Support at
an AOC’s Authorized Service Center or Dealer and at its option, either repair the defective product with new or
rebuilt parts, or replace it with a new or rebuilt product at no charge except as *stated below. As a Standard Policy,
the warranty will be calculated from the manufacture date identified from the product ID serial number, but the total
warranty will be Fifteen (15) months to Thirty Nine (39) months from MFD (manufacture date) depending on sale
country. Warranty will be considered for exceptional cases that are out of warranty as per the product ID serial
number and for such exceptional cases; Original Invoice/Proof Of Purchase Receipt is mandatory.
If the product appears to be defective, please contact your AOC authorized dealer or refer to the service and
support section on AOC’s website for the warranty instructions in your country:
Egypt: http://aocmonitorap.com/egypt_eng
CIS Central Asia: http://aocmonitorap.com/ciscentral
Middle East: http://aocmonitorap.com/middleeast
South Africa: http://aocmonitorap.com/southafrica
Saudi Arabia: http://aocmonitorap.com/saudiarabia
Please ensure you provide a dated proof of purchase along with the product and deliver to the AOC Authorized
Service Center or Dealer under the following condition:
Make sure the LCD Monitor is packed in a proper carton box (AOC prefers the original carton box to
protects your monitor well enough during transport).
Put the RMA number on the address label
Put the RMA number on the shipping carton
*This limited warranty does not cover any losses or damages that occur as a result of:
Damages during transport due to improper packaging
Improper installation or maintenance other then in accordance with AOC’s user manual
Misuse
Neglect
Any cause other than ordinary commercial or industrial application
Adjustment by non-authorized source
69
Repair, modification, or installation of options or parts by anyone other than an AOC Certified or
Authorized Service Center
Improper environments like humidity, water damage and dusts
Damaged by violence, earthquakes and terrorist attacks
Excessive or inadequate heating or air conditioning or electrical powers failures, surges, or other
irregularities
This limited warranty does not cover any of the product firmware or hardware that you or any third party have
modified or altered; you bear the sole responsibility and liability for any such modifications or alteration.
All AOC LCD Monitors are produced according to the ISO 9241-307 Class 1 pixel policy standards.
If your warranty has expired, you still have access to all available service options, but you will be responsible for the
cost of service, including parts, labor, shipping (if any) and applicable taxes. AOC Certified, Authorized Service
Center or dealer will provide you with an estimate of service costs before receiving your authorization to perform
service.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A
PERIOD OF ONE (1) to THREE (3) YEARS FOR PARTS AND LABOR FROM THE ORIGINAL DATE OF
CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS
PERIOD. AOC INTERNATIONAL (EUROPE) B.V. OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE
SOLELY AND EXCULSIVELY AS STATED HERE. AOC INTERNATIONAL (EUROPE) B.V. LIABILITY, WHETHER
BASED ON CONTRACT, TORT, WARRANTY, STRICT LIABILITY, OR OTHER THEORY, SHALL NOT EXCEED
THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO
EVENT SHALL AOC INTERNATIONAL (EUROPE) B.V. BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE
OR FACILITIES OR EQUIPMENT, OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS, WHICH MAY VARY FROM
COUNTRY TO COUNTRY. THIS LIMITED WARRANTY IS ONLY VALID FOR PRODUCTS PURCHASED IN THE
MEMBER COUNTRIES OF THE EUROPEAN UNION.
Information in this document is subject to change without notice. For more information, please visit:
http://www.aocmonitorap.com
70
AOC International (Europe) B.V.
Prins Bernhardplein 200 / 6th floor, Amsterdam, The Netherlands
Tel: +31 (0)20 504 6962 • Fax: +31 (0)20 5046933
AOC Pixel Policy
ISO 9241-307 Class 1
July 25th, 2013
AOC strives to deliver the highest quality products. We use some of the industry’s most advanced manufacturing
processes and practice stringent quality control. However, pixel or sub pixel defects on the TFT monitor panels used in
flat panel monitors are sometimes unavoidable. No manufacturer can guarante e that all panels will be free from pixel
defects, but AOC guarantees that any monitor with an unacceptable number of defects will be repaired or replaced
under warranty. This Pixel Policy explains the different types of pixel defects and defines acceptable defect levels for
each type. In order to qualify for repair or replacement under warranty, the number of pixel defects on a TFT monitor
panel must exceed these acceptable levels.
Pixels and Sub Pixel Definition
A pixel, or picture element, is composed of three sub pixels in the primary colors of red, green and blue. When all sub
pixels of pixel are lit, the three colored sub pixel together appear as a single white pixel. When all are dark, the three
colored sub pixels together appear as a single black pixel.
Types of Pixel Defects
Bright Dot Defects: the monitor displays a dark pattern, sub pixels or pixels are always lit or “on”
Black Dot Defects: the monitor displays a light pattern, sub pixels or pixels are always dark or “off”.
ISO 9241-307
Pixel Defect Class
Defect Type 1
Bright Pixel
Defect Type 2
Black Pixel
Defect Type 3
Bright Sub pixel
Defect Type 4 Black
Sub pixel
Class 1 1 1
2
1
0
+
+
+
1
3
5
AOC International (Europe) B.V.
71
Warranty Statement for North & South Ameri ca (excluding Brazil)
WARRANTY STATEMENT
for AOC Color Monitors
Including those Sold within North America as Specified
Envision Peripherals, Inc. warrants this product to be free from defects in material and workmanship for a period of
three (3) years for parts & labor and one (1) year for CRT Tube or LCD Panel after the original date of consumer
purchase. During this period, EPI ( EPI is the abbreviation of Envision Peripherals, Inc. ) will, at its option, either
repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except
as *stated below. The parts or product that are replaced become the property of EPI.
In the USA to obtain service under this limited warranty, call EPI for the name of the Authorized Service Center
closest to your area. Deliver the product freight pre-paid, along with the dated proof of purchase, to the EPI
Authorized Service Center. If you cannot deliver the product in person:
Pack it in its original shipping container (or equivalent)
Put the RMA number on the address label
Put the RMA number on the shipping carton
Insure it (or assume the risk of loss/damage during shipment)
Pay all shipping charges
EPI is not responsible for damage to inbound product that was not properly packaged.
EPI will pay the return shipment charges within one of the countries specified within this warranty statement. EPI is
not responsible for any costs associated with the transportation of product across international borders. This
includes the international borders of the countries within this warranty statement.
In the United States and Canada contact your Dealer or EPI Customer Service, RMA Department at the toll free
number (888) 662-9888. Or you can request an RMA Number online at www.aoc.com/na-warranty.
* This limited warranty does not cover any losses or damages that occur as a result of:
Shipping or improper installation or maintenance
Misuse
Neglect
Any cause other than ordinary commercial or industrial application
Adjustment by non-authorized source
Repair, modification, or installation of options or parts by anyone other than an EPI Authorized Service Center
Improper environment
Excessive or inadequate heating or air conditioning or electrical power failures, surges, or other irregularities
This three-year limited warranty does not cover any of the product's firmware or hardware that you or any third
party have modified or altered; you bear the sole responsibility and liability for any such modification or alteration.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF
72
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A
PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR AND ONE (1) YEAR FOR CRT TUBE OR LCD PANEL
FROM THE ORIGINAL DATE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR
IMPLIED) APPLY AFTER THIS PERIOD. IN THE UNITED STATES OF AMERICA, SOME STATES DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY
NOT APPLY TO YOU.
EPI OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE SOLELY AND EXCLUSIVELY AS STATED HERE.
EPI’ LIABILITY, WHETHER BASED ON CONTRACT, TORT. WARRANTY, STRICT LIABILITY, OR OTHER
THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE
BASIS OF THE CLAIM. IN NO EVENT SHALL ENVISION PERIPHERALS, INC. BE LIABLE FOR ANY LOSS OF
PROFITS, LOSS OF USE OR FACILITIES OR EQUIPMENT OR OTHER INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGE. IN THE UNITED STATES OF AMERICA, SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.
YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.
In the United States of America, this limited warranty is only valid for Products purchased in the Continental United
States, Alaska, and Hawaii.
Outside the United States of America, this limited warranty is only valid for Products purchased in Canada.
Information in this document is subject to change without notice.
For more details, please visit:
USA: http://us.aoc.com/support/warranty
ARGENTINA: http://ar.aoc.com/support/warranty
BOLIVIA: http://bo.aoc.com/support/warranty
CHILE: http://cl.aoc.com/support/warranty
COLOMBIA: http://co.aoc.com/warranty
COSTA RICA: http://cr.aoc.com/support/warranty
DOMINICAN REPUBLIC: http://do.aoc.com/support/warranty
ECUADOR: http://ec.aoc.com/support/warranty
EL SALVADOR: http://sv.aoc.com/support/warranty
GUATEMALA: http://gt.aoc.com/support/warranty
HONDURAS: http://hn.aoc.com/support/warranty
NICARAGUA: http://ni.aoc.com/support/warranty
PANAMA: http://pa.aoc.com/support/warranty
PARAGUAY: http://py.aoc.com/support/warranty
PERU: http://pe.aoc.com/support/warranty
URUGUAY: http://pe.aoc.com/warranty
VENEZUELA: http://ve.aoc.com/support/warranty
IF COUNTRY NOT LISTED: http://latin.aoc.com/warranty
73
WARRANTY
PERIOD COVERAGE AT
NO CHARGE CUSTOMER
CHARGES
Within the first three months of
purchase: Covered by EASE
- New AOC monitor
- Call tag dispatched and return freight
charges via UPS
- None*
Between 4 months – 1 Year - All Parts & Labor Including CRT
Tube & LCD Panel
- UPS Return Freight to AOC
Between 1 Year - 3 Years:
Covered by standard limited
warranty
- Parts & Labor (excluding CRT Tube
& LCD Panel) - UPS Return Freight to AOC
Only for AOC branded monitors sold within the continental United States.
All AOC branded monitors are now covered by the EASE Program. If your monitor malfunctions at any time
during the first three months, AOC will provide a replacement monitor within 72 hours after you are approved
for our program. If your monitor qualifies for the EASE program, AOC will pay for freight both ways.
Step 1: Phone our TECH Department at 888.662.9888
Step 2: Fill out and return EASE registration forms by mail or fax.
Step 3: We will issue a Return Authorization Number upon verification into the program.
Step 4: A monitor will be advance shipped to your location.
Step 5: We will issue a UPS Call Tag to pick up the defective unit.
Step 6: Please review the following chart to see your EASE program qualifications.
*AOC will need to obtain a credit card number if you would like to get a new AOC monitor advanced shipped to your location, prior to the defective unit
arriving at AOC’s service center. If you do not wish to supply a credit card, AOC will only ship the new monitor, once the defective unit arrives at the AOC
service center.
us
.aoc.com
74