Table of Contents
ASUS XG279Q-G GUNDAM EDITION User Manual
Displayed below is the user manual for XG279Q-G GUNDAM EDITION by ASUS which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
ii
First Edition
October 2019
Copyright © 2019 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM
ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN
THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
iii
Contents
1.3.1 Front/side view ................................................................ 1-2
1.3.2 Back view ........................................................................ 1-3
1.3.3 GamePlus Function ........................................................ 1-4
1.3.4 GameVisual Function ...................................................... 1-5
1.3.5 Other Function(s) ............................................................ 1-6
3.1.1 How to recongure .......................................................... 3-1
3.1.2 OSD function introduction ............................................... 3-1
iv
Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is
required to assure compliance with FCC regulations. Changes or modications
to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
This Class B digital apparatus meets all requirements of the Canadian Interference
- Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement
sur le matériel brouiller du Canada.
v
Safety information
• Before setting up the monitor, carefully read all the documentation that came
with the package.
• To prevent re or shock hazard, never expose the monitor to rain or moisture.
• Never try to open the monitor cabinet. The dangerous high voltages inside the
monitor may result in serious physical injury.
• If the power supply is broken, do not try to x it by yourself. Contact a qualied
service technician or your retailer.
• Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
• Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or over a
radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source indicated
on the label. If you are not sure of the type of power supply to your home,
consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power standard.
• Do not overload power strips and extention cords. Overloading can result in re
or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the monitor in
any area where it may become wet. Place the monitor on a stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a long period
of time. This will protect the monitor from damage due to power surges.
• Never push objects or spill liquid of any kind into the slots on the monitor
cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate congured receptacles marked between
100-240V AC.
• If you encounter technical problems with the monitor, contact a qualied
service technician or your retailer.
• Adjustment of the volume control as well as the equalizer to other settings
than the center position may increase the ear-/headphones output voltage and
therefore the sound pressure level.
• The adapter is only used for this monitor, do not use it for other purpose.
Your device uses one of the following power supplies:
- Manufacturer: Delta Electronics Inc., Model: ADP-90YD B
This symbol of the crossed out wheeled bin indicates that the product (electrical,
electronic equipment, and mercury-containing button cell battery) should not
be placed in municipal waste. Please check local regulations for disposal of
electronic products.
vi
Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect the cables
and power cord. Follow the correct lifting techniques when positioning the
monitor. When lifting or carrying the monitor, grasp the edges of the monitor.
Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed
with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended
for use with the monitor. Never spray cleaner directly on the screen, as it may
drip inside the monitor and cause an electric shock.
• The screen may icker during the initial use due to the nature of the uorescent
light. Turn off the Power Switch and turn it on again to make sure that the
icker disappears.
• You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the previous
screen may remain after switching the image. The screen will recover slowly or
you can turn off the Power Switch for hours.
• When the screen becomes black or ashes, or cannot work anymore, contact
your dealer or service center to x it. Do not repair the screen by yourself!
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying
to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
vii
Refer to the following sources for additional information and for product and
software updates.
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
Your product package may include optional documentation that may have
been added by your dealer. These documents are not part of the standard
package.
Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions for
our customers to be able to responsibly recycle our products, batteries and other
components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detail recycling
information in different region.
viii
1-1ROG Strix XG279Q Series Gaming LCD Monitor
1.1 Welcome!
Thank you for purchasing the ROG gaming monitor!
The latest widescreen LCD monitor from ASUS provides a broader, brighter and
crystal-clear display, plus a host of features that enhance your viewing experience.
With these features, you can enjoy the convenience and delightful visual
experience that the monitor brings to you!
1.2 Package contents
Check your package for the following items:
LCD monitor
Monitor base
Quick start guide
Warranty card
Power adapter
Power cord
DP cable
HDMI cable
USB cable
LED projection cover and changeable lms
Input/Output port cover
If any of the above items is damaged or missing, contact your retailer
immediately.
Select “ON” when you see the message “AURA & LIGHT IN MOTION” appears
if you want to turn on the light on the base and the back. If you disable this
function but later wish to reactivate it, please use the OSD menu to turn it on.
1-2 Chapter 1: Product introduction
1.3 Monitor introduction
5
1
2
3
4
1. ( 5-way) button:
• Turns on the OSD menu. Enacts the selected OSD menu item.
• Increases/Decreases values or moves your selection up/down/left/right.
• Turns on the OSD menu when the monitor enters standby mode or
displays the “NO SIGNAL“ message.
2. button
• Exits the OSD menu item.
• Turns on the OSD menu when the monitor enters standby mode or
displays the “NO SIGNAL“ message.
3. Shortcut 1 button:
• Default: GamePlus.
• To change the shortcut function, go to the MyFavorite > Shortcut >
Shortcut 1 menu.
• Turns on the OSD menu when the monitor enters standby mode or
displays the “NO SIGNAL“ message.
4. Shortcut 2 button:
• Default: GameVisual.
• To change the shortcut function, go to the MyFavorite > Shortcut >
Shortcut 2 menu.
1-3ROG Strix XG279Q Series Gaming LCD Monitor
• Turns on the OSD menu when the monitor enters standby mode or
displays the “NO SIGNAL“ message.
5. Power button/power indicator
• Turns the monitor on/off.
• The color definition of the power indicator is as the below table.
White ON
Amber Standby mode/No signal
OFF OFF
10
This port connects the power cord.
This port is for connection with an HDMI 2.0 compatible device.
This port is for connection with an HDMI 2.0 compatible device.
. This port is for connection with a DisplayPort compatible
device.
This port is for service only. (USB Type-A)
. This port is for connection with a USB upstream
cable. The connection enables the USB ports on the monitor.
. These ports are for connection with USB
devices, such as USB keyboard/mouse, USB flash drive, etc.
This port is only available when an HDMI/DisplayPort cable
is connected.
1-4 Chapter 1: Product introduction
The GamePlus function provides a toolkit and creates a better gaming environment
for users when playing different types of games. The crosshair overlay with 6
different crosshair options lets you choose the one that best suits the game you're
playing. There's also an onscreen timer you can position on the left of the display
so you can keep track of the elapsed gaming time; while the FPS (frames per
second) counter lets you know how smooth the game is running. Display Alignment
displays alignment lines on 4 sides of the screen, serving as an easy and handy
tool for you to line up multiple monitors perfectly. Sniper function (only available
when HDR is disabled on your device) is customized for rst-person shooters. You
can select the magnication ratio and the type of alignment in sequence.
To activate GamePlus:
1. Press the GamePlus shortcut button.
2. Move the ( ) button up/down to select among different functions.
3. Press the ( ) button or move the ( ) button right to confirm the
function you choose, and move the ( ) button up/down to navigate
through the settings. Move the ( ) button left to go back, off, and exit.
4. Highlight the desired setting and press the ( ) button to activate it.
Press the button to inactivate it.
GamePlus
Main Menu
GamePlus —
Crosshair
GamePlus —
Timer
GamePlus —
FPS counter
GamePlus —
Sniper
NEXT BACK/EXIT
GamePlus
FPS
(Practice Mode)
(Practice Mode)
Crosshair
Timer
FPS Counter
Display Alignment
Sniper
NEXT BACK/EXIT
GamePlus
NEXT BACK/EXIT
GamePlus
NEXT BACK/EXIT
GamePlus
FPS
NEXT BACK/EXIT
GamePlus
1.5x
1.7x
2.0x
1-5ROG Strix XG279Q Series Gaming LCD Monitor
The GameVisual function helps you select among different picture modes in a
convenient way.
To activate GameVisual:
1. Press the GameVisual shortcut button
2. Move the ( ) button up/down to highlight a desired setting.
3. Press the ( ) button or move the button right to activate it.
4. To exit the menu, move the ( ) button left .
: This is the best choice for scenery photo displaying with
GameVisualTM Video intelligence Technology.
: This is the best choice for racing game playing with
GameVisualTM Video intelligence Technology.
: This is the best choice for movie watching with
GameVisualTM Video intelligence Technology.
: This is the best choice for Real-Time Strategy (RTS)/
Role-Playing Game (RPG) playing with GameVisualTM Video intelligence
Technology.
: This is the best choice for First Person Shooter game playing
with GameVisualTM Video intelligence Technology.
: This is the best choice for viewing photos and graphics
from PCs.
: This is the best choice for multiplayer online battle arena
game playing with GameVisual™ Video intelligence Technology.
: More items are adjustable in the Color menu.
• In the Racing/MOBA mode, the following function(s) are not user-
congurable: ASCR, Saturation.
• In the sRGB mode, the following function(s) are not user-configurable:
Color Temp., Brightness, Contrast, ASCR, Saturation, Gamma.
• In the Scenery/Cinema mode, the following function(s) are not user-
congurable: Gamma.
1-6 Chapter 1: Product introduction
• HDR
The monitor supports HDR format. When detecting HDR content, an "HDR ON"
message will pop up.
When displaying HDR content, the following function(s) are not available: ELMB
Sync, Sniper, GameVisual, Shadow Boost, Brightness, Contrast, ASCR, Aspect
Control, Blue Light Filter, Color Temp., Gamma, Saturation, Dynamic Dimming
(set as ).
2-1ROG Strix XG279Q Series Gaming LCD Monitor
2.1 Assembling the monitor arm/base
1. Insert the base into the arm.
2 Fix the base to the arm by fastening the bundled screw.
3. Attach the LED projection cover to the stand.
1
2
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
To change the lm on the LED projection cover, follow the illustration below.
12
2-2 Chapter 2: Setup
2.2 Cable management
You can organize the cables with the help of the input/output port cover.
: the cover can be attached or detached.
2-3ROG Strix XG279Q Series Gaming LCD Monitor
2.3 Adjusting the monitor
• For optimal viewing, we recommend that you look at the full face of the
monitor, then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• The recommended adjusting angle is +20˚ to -5˚ (for tilt)/+40˚ to -40˚ (for
swiveling/+120 mm (for height adjustment)/90˚ (for portrait view).
40° 0°
40 °
120mm
-5° ~ +20°
It is normal that the monitor slightly shakes while you adjust the viewing angle.
1. Lift the monitor to the highest position.
2 Tilt the monitor to its maximum angle.
3. Pivot the monitor clockwise to the angle you need.
-5° ~ +20°
0°
90°
0°
90°
It is normal that the monitor slightly shakes while you adjust the viewing angle.
2-4 Chapter 2: Setup
2.4 Detaching the arm (for VESA wall
mount)
The detachable arm of this monitor is specially designed for VESA wall mount.
To detach the arm:
1. Have the front of the monitor face down on a table.
2. Remove the covers on where the monitor and the arm meet.
3. Loosen the four screws on the back of the monitor and remove the arm/base.
1 2 3 4
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• The VESA wall mount kit (100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load
22.7kg (Screw size: M4 x 10 mm)
2-5ROG Strix XG279Q Series Gaming LCD Monitor
2.5 Connecting the cables
Connect the cables as the following instructions:
For service only
:
a. Connect the power adapter securely to the monitor’s DC input.
b. Connect one end of the power cord to the power adapter and the other
end to a power outlet.
:
a. Plug one end of the DisplayPort/HDMI cable to the monitor’s
DisplayPort/HDMI port.
b. Connect the other end of the DisplayPort/HDMI cable to your computer's
DisplayPort/HDMI port.
connect the end with plug type to the monitor’s
earphone jack when an HDMI or DisplayPort signal is fed.
: Take the supplied USB 3.0 cable, and plug
the smaller end (type B) of the USB upstream cable to the monitor’s USB
upstream port, and the larger end (type A) to your computer’s USB 3.0 port.
Make sure your computer is installed with the lastest Windows 7/Windows 8.1/
Windows 10 operating system. That will enable the USB ports on the monitor
to work.
2.6 Turning on the monitor
Press the power button . See page 1-2 for the location of the power button. The
power indicator lights up in white to show that the monitor is ON.
2-6 Chapter 2: Setup
3-1ROG Strix XG279Q Series Gaming LCD Monitor
3.1 OSD (On-Screen Display) menu
MOVE/ENTER BACK EXIT
DisplayPort 2560x1440@165Hz
Racing Mode Aura Rainbow
ROG Strix XG279Q HDR OFF
Overclocking
OD
Adaptive-Sync (DP)
ELMB SYNC
GamePlus
GameVisual
Shadow Boost
Gaming
Image
Color
Input Select
Lighting Effect
MyFavorite
System Setup
1. Press the ( ) button to activate the OSD menu.
2. Move the ( ) button up/down to navigate through the functions.
Highlight the desired function and press the ( ) button to activate it. If
the function selected has a sub-menu, move the ( ) button up/down
again to navigate through the sub-menu functions. Highlight the desired sub-
menu function and press the ( ) button or move the ( ) button
right to activate it.
3. Move the ( ) button up/down to change the settings of the selected
function.
4. To exit and save the OSD menu, press the button or move the
( ) left repeatedly until the OSD menu disappears. To adjust other
functions, repeat steps 1-3.
MOVE/ENTER BACK EXIT
DisplayPort 2560x1440@165Hz
Racing Mode Aura Rainbow
ROG Strix XG279Q HDR OFF
Overclocking
OD
Adaptive-Sync (DP)
ELMB SYNC
GamePlus
GameVisual
Shadow Boost
Gaming
Image
Color
Input Select
Lighting Effect
MyFavorite
System Setup
:
: This function allows you to adjust the refresh rate.
3-2 Chapter 3: General Instructions
: Allows you to select a maximum refresh rate of 170Hz
(Only for DisplayPort input). After selecting, press the ( ) button to
activate the setting.
• Overclocking may cause screen ickering. To reduce such effects,
disconnect the DisplayPort cable and use the monitor OSD menu to try
again with a safer Max. Refresh rate.
• This function is only available when is
.
: Improves the gray level response time of the LCD panel.
This function is not available when is enabled.
Allows an Adaptive-Sync supported*
graphics source to dynamically adjust display refresh rate based on typical content
frame rates for power efficient, virtually stutter free and low-latency display update.
can only be activated
within 48Hz~144Hz for HDMI and 48Hz~170Hz for DisplayPort.
• This function is only available when is
.
• *For supported GPUs, minimum PC system and driver requirements,
please contact the GPU manufactures.
: Allows you to turn on the function when
is On. This function eliminates screen tearing, reduces
ghosting and motion blur when playing games.
When is Off, this function can
only be activated when the refresh rate is 120Hz, 144Hz, 155Hz, 160Hz or
165Hz.
: See for details.
: See for details.
: Dark color enhancement adjusts monitor gamma curve to enrich
the dark tones in an image, making dark scenes and objects much easier to be
seen.
This function is only available in Racing mode, RTS/RPG mode, FPS mode,
sRGB mode or User mode.
3-3ROG Strix XG279Q Series Gaming LCD Monitor
MOVE/ENTER BACK EXIT
DisplayPort 2560x1440@165Hz
Racing Mode Aura Rainbow
ROG Strix XG279Q HDR OFF
Gaming
Image
Color
Input Select
Lighting Effect
MyFavorite
System Setup
Brightness
Contrast
HDR
Dynamic Dimming
ASCR
Aspect Control
Blue Light Filter
100
80
: The adjusting range is from 0 to 100.
: The adjusting range is from 0 to 100.
: Contains two HDR modes.
: Is the HDR mode that ASUS has specially adjusted
for HDR performance.
: Complies with VESA Display HDR.
: Synchronizes with contents while contrast changing to
execute backlight dynamic dimming.
: Turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
This function is not available (set as ) when is enabled.
: Adjusts the aspect ratio to , or .
is not available when
is enabled.
:
: No change.
: The higher the level, the less blue light is scattered. When
Blue Light Filter is activated, the default settings of Racing Mode will be
automatically imported. Between Level 1 to Level 3, the Brightness function
is user-configurable. Level 4 is an optimized setting. It is in compliance
with TUV Low Blue Light Certification. The Brightness function is not user-
configurable.
• Please refer to the following to alleviate eye strains:
• Users should take some time away from the display if working for long
hours. It is advised to take short breaks (at least 5 mins) after around 1
hour of continuous working at the computer. Taking short and frequent
breaks is more effective than a single longer break.
• To minimize eye strain and dryness in your eyes, you should rest the eye
periodically by focusing on objects that are far away.
3-4 Chapter 3: General Instructions
• Eye exercises can help to reduces eye strain. Repeat these exercises
often. If eye strain continues please consult a physician. Eye exercises: (1)
Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes
diagonal.
• High energy blue light may lead to eye strain and AMD (Age-Related
Macular Degeneration). Blue light Filter reduces 70% (max.) harmful blue
light to avoid CVS (Computer Vision Syndrome).
MOVE/ENTER BACK EXIT
DisplayPort 2560x1440@165Hz
Racing Mode Aura Rainbow
ROG Strix XG279Q HDR OFF
Gaming
Image
Color
Input Select
Lighting Effect
MyFavorite
System Setup
Color Temp.
Gamma
Saturation
: Contains 4 modes including Cool, Normal, Warm, and User Mode.
: Allows you to set the color mode to 2.5, 2.2, or 1.8.
: The adjusting range is from 0 to 100.
In this function, you can select your desired input source.
MOVE/ENTER BACK EXIT
DisplayPort 2560x1440@165Hz
Racing Mode Aura Rainbow
ROG Strix XG279Q HDR OFF
Gaming
Image
Color
Input Select
Lighting Effect
MyFavorite
System Setup
HDMI-1
HDMI-2
DisplayPort
MOVE/ENTER BACK EXIT
DisplayPort 2560x1440@165Hz
Racing Mode Aura Rainbow
ROG Strix XG279Q HDR OFF
Gaming
Image
Color
Input Select
Lighting Effect
MyFavorite
System Setup
Aura Sync
Aura RGB
LIGHT IN MOTION
3-5ROG Strix XG279Q Series Gaming LCD Monitor
: Allows you to turn on or off the Aura Sync function that synchronizes
the Aura RGB light effect among all supported devices.
: There are 6 living colors can be chosen: Rainbow, Color Cycle, Static,
Breathing, Strobing, OFF. You can manually change the R/G/B/C/M/Y color for
Static, Breathing, and Strobing modes.
This function is not available when is enabled.
: Selects the brightness level of the light on the stand. The
adjusting range is from Level 0 to 3, Level 0 = Off.
MOVE/ENTER BACK EXIT
DisplayPort 2560x1440@165Hz
Racing Mode Aura Rainbow
ROG Strix XG279Q HDR OFF
Gaming
Image
Color
Input Select
Lighting Effect
MyFavorite
System Setup
Shortcut
Customized Setting
:
/: Sets the shortcut functions for shortcut buttons.
When a certain function is selected or activated, your shortcut button may not
support. Available function choices for shortcut: GamePlus (only for
), GameVisual (only for ), User Mode, Brightness, Contrast, HDR,
Blue Light Filter, Color Temp., Volume.
: Loads/Saves all settings on the monitor.
MOVE/ENTER BACK EXIT
DisplayPort 2560x1440@165Hz
Racing Mode Aura Rainbow
ROG Strix XG279Q HDR OFF
Giming
Image
Color
Input Select
Lighting Effect
MyFavorite
System Setup
Language
Sound
USB Hub
Power Indicator
Power Key Lock
Key Lock
OSD Setup
DisplayPort Ver.
: There are 21 languages for your selection, including English, French,
German, Italian, Spanish, Dutch, Portuguese, Russian, Czech, Croatian, Polish,
Romanian, Hungarian, Turkish, Simplified Chinese, Traditional Chinese, Japanese,
Korean, Thai, Indonesian, Persian.
3-6 Chapter 3: General Instructions
: Sets the sound related settings from this menu.
: The adjusting range is from 0 to 100.
: Toggles the monitor sound between on and off.
: Turns On/Off the USB Hub function during standby mode.
This function is not available (set as ) when is
enabled.
Turns the power LED indicator on/off.
Enables or disables the power key.
: To disable all function keys. Press over 5 seconds to cancel the key
lock function.
:
• Adjusts the OSD timeout from 10 to 120 seconds.
• Enables or disables the DDC/CI function.
• Adjusts the OSD background from opaque to transparent.
: Compatibility with graphic card. Select or
by graphic card DP version.
is only available when and
are off.
: Shows the monitor information.
: Selecting “Yes” allows you to restore the default settings.
3-7ROG Strix XG279Q Series Gaming LCD Monitor
3.2 Aura
AURA is a software program that controls the colorful LEDs on supported devices,
such as monitors, motherboards, graphic cards, desktop PCs, etc. Aura allows
you to adjust the color of the RGB LEDs on these devices and select different light
effects. You can also correct or adjust the color of the LEDs by calibrating them.
To activate Aura:
1. Turn ON the function in the OSD menu.
2. Connect the USB 3.0 upstream port of the monitor to the USB port of your
computer.
3. Install AURA and then restart the computer.
4. Double-click the AURA program icon on your desktop.
Refer to the gure below for information about the AURA program functions.
Adjust AURA lighting options
Select the desired AURA lighting
effect when the system has been
turned on
Click to enable the
default settings
Click to undo the changes
Click to apply the
changes
• If the USB upstream connection between the monitor and computer is
disconnected, to resume the Aura function, you need to re-connect the
USB 3.0 upstream port of the monitor to the computer and then restart the
computer.
• Visit https://www.asus.com/campaign/aura for more details.
3-8 Chapter 3: General Instructions
3.3 Specicationssummary
Panel type TFT LCD
Panel size 27”W (16:9, 68.47 cm) wide screen
Max. resolution 2560 x 1440
Pixel pitch 0.2331 mm x 0.2331 mm
Brightness (Typ.) 400 cd/m2
Contrast ratio (Typ.) 1000:1
Viewing angle(H/V) CR>10 178˚/178˚
Display colors 16.7 M
Response time 1 ms (Gray to Gray)
Color temperature selection 4 color temperatures
Analog input No
Digital input DisplayPort v1.2 x 1, HDMI v2.0 x 2
Earphone jack Yes
Audio input No
Speaker (Built-in) Yes
USB 3.0 port Upstream x 1, downstream x 2
Colors Black
Power LED White (On)/Amber (Standby)
Tilt +20˚~ -5˚
Pivot 90˚ (clockwise)
Swivel +40˚~ -40˚
Height adjustment 120 mm
VESA wall mount 100 x 100 mm
Kensington lock Yes
Voltage rating AC: 100~240V
DC: 19V, 4.74A (AC adapter)
Power consumption Power On: < 29 W**, Standby: < 0.5 W,
Power Off: < 0.5 W
Temperature (Operating) 0˚C~40˚C
Temperature (Non-operating) -20˚C~+60˚C
Dimensions (W x H x D) 611 x 422 x 270 mm (lowest)
611 x 542 x 270 mm (highest)
711 x 271 x 481 mm (package)
Weight (Esti.) 7.0 kg (Net); 9.8 kg (Gross)
Multi-languages 21 languages (English, French, German,
Italian, Spanish, Dutch, Portuguese, Russian,
Czech, Croatian, Polish, Romanian, Hungarian,
Turkish, Simplied Chinese, Traditional Chinese,
Japanese, Korean, Thai, Indonesian, Persian)
Accessories Quick start guide, warranty card, power adapter,
power cord, DP cable, HDMI cable, USB cable,
LED projection cover and changeable lms, input/
output port cover
3-9ROG Strix XG279Q Series Gaming LCD Monitor
Compliance and standards CB, CE, CU, CCC, UL/cUL, FCC, RCM, BSMI,
VCCI, RoHS, WEEE, J-MOSS, ErP, PSE,
CEL, Windows 7 WHQL, Windows 8.1 WHQL,
Windows 10 WHQL, KCC, E-Standby, TUV-
Flicker Free, TUV-Low Blue Light, UkrSEPRO,
ICES-3, CEC
*Specifications are subject to change without notice.
**Measuring a screen brightness of 200 nits without audio/USB/Card reader
connection.
3-10 Chapter 3: General Instructions
3.4 Outline dimensions
5.0
20.0
100,0
[3.9]
117,0
[4.6]
100,0
[3.9]
117,0
[4.6]
89,6 [3.5]
175,0 [6.9]
40.00
40.00
366,5 [14.4]
436,9 [17.2]
85,4 [3.4]
26,3 [1.0]
512,3 [20.2]
269,5 [10.6]
168,3 [6.6]
208,7 [8.2]
90.0
611,2 [24.1]
596,7 [23.5]-Active area
366,5 [14.4]
335,7 [13.2]-Active area
541,6 [21.3]
22,6 [0.9]
197,6 [7.8]
167,8 [6.6]
298,4 [11.7]
120 [4.7]
ASUS XG279Q Outline Dimension
*Unit: mm(inch)
AA Center
Wall mount Keep out area
M4*4 Depth 10
Swivel:
40 Degree
Pivot: 90 Degree(clockwise)
3-11ROG Strix XG279Q Series Gaming LCD Monitor
3.5 Troubleshooting (FAQ)
Power LED is not ON • Press the button to check if the monitor
is in the ON mode.
• Check if the power cord is properly
connected to the monitor and the power
outlet.
The power LED lights white and there is no
screen image
• Check if the monitor and the computer are
in the ON mode.
• Make sure the signal cable is properly
connected the monitor and the computer.
• Inspect the signal cable and make sure
none of the pins are bent.
• Connect the computer with another
available monitor to check if the computer
is properly working.
Screen image is too light or dark • Adjust the Contrast and Brightness
settings via OSD.
Screen image bounces or a wave pattern is
present in the image
• Make sure the signal cable is properly
connected to the monitor and the
computer.
• Move electrical devices that may cause
electrical interference.
Screen image has color defects (white does
not look white)
• Inspect the signal cable and make sure
that none of the pins are bent.
• Perform All Reset via OSD.
• Adjust the R/G/B color settings or select
the Color Temperature via OSD.
Brightness decreases after displaying HDR
content for a period of time
• Turn off the monitor by pressing the power
button and then turn on the monitor.
• Turn off the monitor by disconnecting the
power cord and then turn on the monitor.
• Reactivate the HDR function on your
device.
3-12 Chapter 3: General Instructions
3.6 Supportedoperatingmode
Resolution frequency HDMI DP
Refresh rate Refresh rate
640x480 60Hz 60Hz
640x480 67Hz 67Hz
640x480 72Hz 72Hz
640x480 75Hz 75Hz
720x400 70Hz 70Hz
800x600 60Hz 60Hz
800x600 72Hz 72Hz
800x600 75Hz 75Hz
832x624 75Hz 75Hz
1024x768 60Hz 60Hz
1024x768 70Hz 70Hz
1024x768 75Hz 75Hz
1152x864 75Hz 75Hz
1280x1024 60Hz 60Hz
1280x1024 75Hz 75Hz
1920x1080 60Hz 60Hz
1920x1080 100Hz 100Hz
1920x1080 120Hz 120Hz
2560x1440 60Hz 60Hz
2560x1440 100Hz 100Hz
2560x1440 120Hz 120Hz
2560x1440 144Hz 144Hz
2560x1440 Not supported 155Hz
2560x1440 Not supported 160Hz
2560x1440 Not supported 165Hz
2560x1440 Not supported 170Hz
3-13ROG Strix XG279Q Series Gaming LCD Monitor
720x480P 59.94Hz Not supprted
720x480P 60Hz Not supprted
1280x720P 59.94Hz 59.94Hz
1280x720P 60Hz 60Hz
1440x480P Not supprted 59.94Hz
1440x480P 60Hz 60Hz
1920x1080P 59.94Hz 59.94Hz
1920x1080P 60Hz 60Hz
1920x1080P 120Hz 120Hz
3-14 Chapter 3: General Instructions