Bouncepad Counter Flex User Manual
Displayed below is the user manual for Counter Flex by Bouncepad which is a product in the Tablet Security Enclosures category. This manual has pages.
Related Manuals
Sheet Code: BP-IM-039_REV2
Release Date: 28/10/2019
Copyright 2016 Spotspot Ltd. (T/A
Bouncepad) all rights reserved.
Condential, no part of this publication
may be reproduced or transmitted in any
form without the written permission of the
copyright holder.
Freestanding
Base
Flex Mounting Arm
Fixings Kit
Tablet Set-up Kit
Install the Tablet Setup Kit. Each kit is specic per
tablet device and Bouncepad Case.
4
4x Corner Pieces
1x Cable Clip
4x Tablet Supports
Feed the tablet cable
through the Bouncepad
Case & mounting arm
5 6
Counter Flex
Assembly Instructions
Tools Required:
Faceplate
Case
Pair of Keys
In the Box
4x M4x20mm
Buttonhead
screw
4x M4x12mm
Buttonhead
screw
8x M4 Split
Washer
1x Case
Washer
Fixings List
* Due to the modular nature of our product range
you may receive additional xings in the xings kit
Locate & secure the Flex
Mounting Arm to the
Freestanding Base.
1
M4x12mm
Buttonhead
screw
M4 Split Washer
Tighten screw(s) using hand tools, using electric
tools may damage your Bouncepad.
2Attach the Bouncepad Case to its
Mounting Arm. Take care to ensure
correct & full thread engagement.
Tighten screw(s) using hand tools, using electric
tools may damage your Bouncepad.
Case Washer
M4 Split Washer
M4x20mm
Buttonhead
screw
Unlock & remove the
Faceplate from the
Bouncepad Case.
3
Place the tablet into the
Case and connect to
power.
Locate and lock the
Faceplate onto the
Bouncepad Case.
67Installation is now
complete.
*We recommend recording the key number so
you can purchase additional keys in the future.
Key number here
1x T20 Pin
Torx Driver Bit
Socket Driver
T20 Pin Torx Driver Bit
T20 Pin Torx Driver Bit