Bouncepad Lounge w/ Reinforced USB Cable User Manual
Displayed below is the user manual for Lounge w/ Reinforced USB Cable by Bouncepad which is a product in the Tablet Security Enclosures category. This manual has pages.
Related Manuals
With the remaining xings, secure
the reinforced cable to the Case.
Feed the Bouncepad Lounge
reinforced cable through the Case as
shown.
Ensure the Lounge Cone is orientated
correctly as shown, with the cable
exiting the Cone at top.
Secure the Lounge Cone to the Case.
Install the Tablet Setup Kit. Each
kit is specic per tablet device and
Bouncepad Case.
4
6 7
Fixings Kit
Tablet Set-up Kit
Sheet Code: BP-IM-044_REV2
Release Date: 28/10/2019
Copyright 2016 Spotspot Ltd. (T/A
Bouncepad) all rights reserved.
Condential, no part of this publication
may be reproduced or transmitted in any
form without the written permission of the
copyright holder. 1
2 3
Install the tablet into the Case, connecting
the power cable to the tablet.
Lounge Mounting
Arm & reinforced
cable
4x Corner Pieces
1x Cable Clip
4x Tablet Supports
M4 Split Washer
M4 Split Washer
Lounge
Assembly Instructions
Tools Required:
Pair of Keys
In the Box Fixings List
4x M4x20mm
Buttonhead
screw
4x M4 Split
Washer
1x Case
Washer
* Due to the modular nature of
our product range you may receive
additional xings in the xings kit
Faceplate
Case
M4x20mm
Buttonhead
screw
M4x20mm
Buttonhead
screw
T20 Pin Torx
Driver Bit
Case Washer
Tighten screw(s) using hand tools, using electric
tools may damage your Bouncepad.
Unlock & remove the
Faceplate from the
Bouncepad Case.
5
1x T20 Pin
Torx Driver Bit
Socket Driver
8 9
Locate & lock the Faceplate to the
Case.
Connect the Tablet cable to its power supply &
turn on. We recommend locking the reinforced
cable to an immovable object for security.
*Illustrated securing solution shown
for illustrative purposes only. Padlock
or power supply not provided.
*We recommend recording the key number so
you can purchase additional keys in the future.
Key number here
7Installation is now
complete.