Bouncepad Wing User Manual
Displayed below is the user manual for Wing by Bouncepad which is a product in the Tablet Security Enclosures category. This manual has pages.
Related Manuals
Sheet Code: BP-IM-072_REV1
Release Date: 24/05/2021
Copyright 2016 Spotspot Ltd. (T/A
Bouncepad) all rights reserved.
Condential, no part of this publication
may be reproduced or transmitted in any
form without the written permission of the
copyright holder.
Wing - Freestanding
Assembly Instructions
In the Box Fixings
List
Tools Required:
All tools provided
Mounting Arm
Access Panel
Freestanding
Base
Mounting Arm
Case Back
Faceplate
8x M4x8mm
Buttonhead
screw
10x M6x10mm
Buttonhead
screw
*xings to attach the stand to the
ground are not provided.
Locate the Mounting Arm onto the
Freestanding Base.
Secure the Mounting Arm to the
Mount Bracket, with 5x M6x10mm
screws.
1 2 3 Remove the Mounting Arm Access
Panel. Safely store this aside for use
later.
4Remove the Faceplate from the Case
Back. Store this aside. 5Locate and secure the Case Back to
the Mounting Arm, with 4x M6x10mm
screws. Ensure good Case alignment.
Complete the separate tablet setup
document - specic to your tablet,
device orientation & locking method.
6
Bouncepad
Lock
*Fitted into Case by Bouncepad.
**Lock available as optional extra
(at additional charge).
Sheet Code: BP-IM-074_REV0
Release Date: 15/06/2021
Copyright 2016 Spotspot Ltd. (T/A
Bouncepad) all rights reserved.
Condential, no part of this publication
may be reproduced or transmitted in any
form without the written permission of the
copyright holder.
Wing - Tablet Setup
Assembly Instructions
Tools Required:
All tools provided
Follow the tablet specic assembly guide
shown for locating your tablet setup kit.
Take care to ensure correct thread
engagement between the xings & tablet
supports.
!
*Your congured product may not be representative of the shown illustration.
**The Bouncepad lock is an optional extra (at additional charge).
M4x8mm
Buttonhead
screw
Tablet support
Follow the shown
guide if installing your
device in Landscape.
Follow the shown
guide if installing your
device in Portrait.
Device:
iPad Pro 12.9” (Gen3,4,5)
Follow the shown
guide if installing your
device in Landscape.
Follow the shown
guide if installing your
device in Portrait.
TDL16
TDL17
TDL16
TDL17
TDL16
TDL16
TDL16
TDL16
TDL16
TDL16
TDL17
TDL17
8 97
11 12
Locate the Faceplate onto the Case
Back
Secure the Faceplate shut with your
chosen locking method.
Locate and secure the
Access Panel to the
Mounting Arm.
For added security,
install a Kensington
security cable.
10 Connect the tablet cable to a power
source.
Installation is now
complete.
13
Install the tablet and the tablet
power cable.
*The Case is congured to your order.
If requiring a dierent tablet
conguration, please contact us.
*If requiring an upgrade to a
keyed Case, please contact us.
*Kensington security
cable not provided.