Canon 1372C005 User Manual
Displayed below is the user manual for 1372C005 by Canon which is a product in the Binoculars category. This manual has pages.
Related Manuals
Instructions
ENG
ENG-1
Thank you for purchasing a Canon
product.
The Canon 10x32 IS (10x), 12x32 IS (12x), and 14x32 IS (14x) prism
binoculars are equipped with a lens-shift type Image Stabilizer.
Before using the binoculars, read this instruction booklet to familiarize
yourself with the proper operation.
Also, please keep this instruction booklet in a safe place so that you can
refer to it at anytime.
z “IS” stands for Image Stabilizer.
Symbols
Warning to prevent malfunction or damage to the binoculars.
Supplementary hints for using the binoculars.
Accessories
The binoculars come with the following accessories:
Case ..................................................... 1
Strap ..................................................... 1
Eyepiece lens caps............................... 1
Strings (for eyepiece lens caps) .......... 1
AA alkaline batteries ............................. 2
ENG-2
Precautions for Use (Please be sure to read before use)
z Please be sure to read this section carefully beforehand in order to
use your binoculars correctly and safely.
zThe following precautions are designed so that you will use your
binoculars safely. Please be sure to read and follow them in order to
prevent injury to you or others as well as damage to them.
Warning (regarding the binoculars)
Details pertaining to risks that may result in death or serious injury.
zNever look at the sun with the binoculars.
Doing so can cause loss of vision.
zDo not place the binoculars under direct sunlight. Otherwise, the lens may
concentrate the sun's rays and cause a fire.
zKeep the plastic bags used for packaging out of reach of small children since
suffocation may occur if a bag is placed over their head.
zIf the strap is mistakenly wrapped around the neck, suffocation may result.
Caution (regarding the binoculars)
Details pertaining to risks that may result in injury.
zDo not place the binoculars on an unstable surface. Doing so may cause the
binoculars to fall and could result in a personal injury.
zDo not use the binoculars while walking. Doing so may cause you to collide
into objects or fall down and could result in a personal injury.
zDo not swing the binoculars around by the strap. Doing so may cause others
to be hit by the binoculars and could result in a personal injury.
zFingers may be pinched when adjusting the width of the binoculars. Be aware
of this when the binoculars are being used by small children.
zWhen used for a prolonged period or when used repeatedly, the rubber
eyecups may irritate the skin around the eyes. If you suspect that this may
have occurred, please see a physician.
Precautions for Use (Please be sure to read before use)
ENG-3
Caution (regarding the binoculars)
Details pertaining to risks that may result in damage to property.
zBinoculars are precision instruments. Do not drop them or subject them to
shock. Never attempt to disassemble them.
zDo not place these binoculars underwater. Also, avoid exposing the
binoculars to rain or water spray.
zDo not store the binoculars in a car or similar location under direct sunlight.
Doing so will cause the binoculars to reach a temperature higher than
expected which may cause damage to occur.
zDo not use any organic solvent, such as alcohol, thinner, or benzene when
wiping the lenses or body. If the lens is dirty, first use a blower brush to
remove dust, etc., from the lens surface. Then use a soft, dry cloth and wipe
the lens gently without scratching it.
Warning (regarding the batteries)
Details pertaining to risks that may result in death or serious injury.
zPlease follow the precautions below when using batteries. Not doing so may
result in overheating, generation of smoke, ignitions, battery leakage, and
explosions which may lead to fire or personal injury.
1. Be sure not to use batteries with a nominal voltage rating of 1.5V or higher
or batteries which have no nominal voltage information.
2. Do not use batteries of different brands together or use old batteries with
new ones. Replace the batteries with two new batteries at the same time
from the same brand.
3. Make sure that the battery polarity is correct.
4. Do not attempt to disassemble batteries, charge the batteries (except for
rechargeable batteries), leave batteries in a hot place, short circuit the
contacts, or throw them into a fire.
zIn rare cases, some AA-size lithium batteries will reach extremely high
temperatures. For your safety, please refrain from using AA-size lithium
batteries.
ENG-4
Precautions for Use (Please be sure to read before use)
Caution (regarding the batteries)
Details pertaining to risks that may result in injury.
zI
n the event that liquid from the inside of the battery leaks out and contacts
your skin, be sure to wash the liquid off thoroughly. Also, do not rub your
eyes or mouth using any hand that made contact with liquid from the battery.
Caution (regarding the batteries)
Details pertaining to risks that may result in damage to property.
z Please remove the batteries when not using the binoculars. If the batteries
are left inside, they may leak and cause damage.
Handling Precautions
zStoring the binoculars in a humid location may cause fungus to form on the
lenses or cause the lenses to become cloudy. If the binoculars are not to be
used for an extended period, clean the lenses and body thoroughly and store
in a well-ventilated dry place.
zIf the binoculars are taken from a cold environment to a warm one,
condensation may develop on the surface and internal parts due to the sudden
change in temperature. To prevent condensation, first put the binoculars into
an airtight plastic bag before taking it to a warm environment. Let it gradually
adjust to the warmer temperature, then take out the binoculars. Do the same
when taking the binoculars from a warm environment to a cold one.
ENG-5
Nomenclature
(The 14x32 IS is shown in the illustrations.)
Image Stabilizer button
Objective lenses
Lamp
Dioptric correction scale
Dioptric correction ring
String attachment location
Battery chamber
cover
Objective lens protector
Strap mount
Focusing knob
Eyecup
Eyepiece lenses
Eyepiece lens caps
POWERD IS button
ENG-6
Using the Lens Caps
Attaching Eyepiece Lens Caps
zAttach them over the eyecups.
Installing the Strap
1Fasten the strap.
zMake sure that there is no slack
and the strap does not loosen at the
clasp when you pull it.
2Connect the objective lens caps.
zInstall the string included in the
package to the eyepiece lens cap
(1) and then attach the string to the
strap (2).
ENG-7
Loading the Batteries
1Open the cover.
zOpen the battery chamber cover.
2Insert the battery.
zLoad the two batteries in the correct
+ and – orientation as shown in the
illustration on the battery chamber
cover. Once the batteries have been
placed inside, rmly close the battery
chamber cover.
3Check that the lamp lights.
zPress the Image Stabilizer button or
POWERD IS button and check that
the lamp lights (please continue to
hold the button for more than one
second).
zWhen handling batteries, please carefully read " Warning (regarding
the batteries)" and " Caution (regarding the batteries)" which are found
on page 3-4 of this manual.
zDo not load the batteries backwards. Doing so may bend the spring
electrodes, causing damage.
zBe careful not to let moisture onto the inner side of the battery chamber
cover or into the chamber. If there is moisture, make sure to remove it
and adequately dry it off before changing batteries.
Battery Life (Continuous Use) (Based on Canon's testing conditions)
23°C / 73°F –10°C / 14°F
Size-AA alkaline batteries* Approx. 10 hours Approx. 2 hours
* Alkaline battery usage times can vary greatly depending on the brand.
AA-size nickel metal hydride batteries (Ni-MH) can also be used.
ENG-8
Before You Start
1Adjust the eyecup position.
zW
hen using the binoculars while
wearing eyeglasses, turn the eyecups
to adjust the height for easy viewing.
2Adjust the width of the
binoculars.
zL
ook through the binoculars and
adjust the angle of the eyepieces until
the left and right images converge.
zDoing the above minimizes eye fatigue during viewing.
zWhen adjusting the width of the binoculars to suit the width between your
eyes, look at a distant object.
3Adjust the diopter.
zFirst look through the left eyepiece
only and adjust the focusing knob
until the object looks sharp.
zThen look through the right eyepiece
only and look at the same object
while turning the dioptric correction
ring until the object looks sharp.
4Adjust the focus.
zLook through the eyepiece and turn
the focusing knob until the object
looks sharp.
ENG-9
Using the Image Stabilizer
When you look through the binoculars, the image may be shaking and
difficult to see since your hands are holding the binoculars. In such a
case, the Image Stabilizer can help steady the image.
zThe binoculars feature a general IS, which provides image
stabilization when looking at a wide area, and a POWERD IS, which is
especially effective when continuously aiming the binoculars at one
point.
zThe Image Stabilizer can be operated using the following methods:
(1) Five-minute operation
zStarting and stopping Image Stabilizer
operation
• Press the Image Stabilizer button and quickly
let it go, and the general IS will operate
continuously for ve minutes (1).
To stop general IS operation, press and
release the Image Stabilizer button again (1).
• Similarly, pressing the POWERD IS button
and quickly letting it go will activate the
POWERD IS continuously for ve minutes (2).
To stop POWERD IS operation, press and
release the POWERD IS button again (2).
zSwitching between general IS and POWERD IS
• During general IS operation, press and quickly release the POWERD IS
button to switch to POWERD IS* (2).
Also, press and hold the POWERD IS button during general IS operation to
switch to POWERD IS. Operation will be stopped once the button is released
(2).
• Similarly, pressing and quickly releasing the Image Stabilizer button during
POWERD IS operation will cause the binoculars to switch to general IS* (1).
A
lso, press and hold the Image Stabilizer button during POWERD IS operation
to switch to
general
IS. Operation will be stopped once the button is released
(1).
* After switching to the other IS, it will continue to operate for ve minutes.
ENG-10
Using the Image Stabilizer
(2) Holding down the button
zStarting and stopping Image Stabilizer operation
• The general IS will operate while holding down the Image Stabilizer button (1).
Similarly, the POWERD IS will operate while holding down the POWERD IS
button (2).
• IS operation will stop once you let go of the button.
zSwitching between general IS and POWERD IS
• When continuing to hold the Image Stabilizer button during general IS
operation, press and hold the POWERD IS button and let go of the Image
Stabilizer button to switch to POWERD IS operation (1, 2).
• When continuing to hold the POWERD IS button during POWERD IS
operation, press and hold the Image Stabilizer button and let go of the
POWERD IS button to switch to general IS operation (2, 1).
• IS operation will stop once you let go of all buttons.
zThe Image Stabilizer may not be able to compensate when the user's
body is being deeply shaken, subjected to vibration, or when the user's
hands are shaking too much.
zIf the binoculars face down for more than 10 seconds, such as when they
are hanging from the strap, the Image Stabilizer will turn off to conserve
power. To use the binoculars in a downward direction, keep pressing the
Image Stabilizer button or the POWERD IS button.
zEven without batteries loaded, the binoculars can still be used as is.
ENG-11
Using the Case
zPlace the binoculars in the case while
allowing the strap to extend outside the
case.
zClose the zipper to where the strap
extends from the case and then close the
case ap.
ENG-12
Troubleshooting
If there is a problem with the binoculars, first refer to the table below to
see if you can resolve it. If the problem cannot be resolved, contact your
dealer or nearest Canon Service Center.
Problem Probable Cause Corrective Measures
The image is not clear. The lens is dirty. Use a blower brush to
remove dust, etc., from the
lens surface. Then use a
soft, dry cloth to wipe the
lens gently.
The diopter has not been
properly set.
Adjust the diopter
(see step 3 on page 8).
The width of the binoculars
does not suit the width
between your eyes.
Adjust the width of the
binoculars
(See step 2 on page 8).
The binoculars are not
properly focused.
Focus the binoculars
(see step 4 on page 8).
The Image Stabilizer
does not operate.
There are no batteries
loaded.
Load batteries having
enough power
(See page 7 “Loading the
Batteries”).
When the Image Stabilizer
button is pressed, the lamp
does not light.
If the lamp does not light,
it means the batteries are
exhausted. Replace the
batteries with new ones.
(See page 7 “Loading the
Batteries”)
When the Image
Stabilizer is on, the
binoculars make an
unusual sound when
shaken deeply.
The battery power is low. Replace the batteries with
new ones.
(See page 7 “Loading the
Batteries”)
ENG-13
Major Specifications
10x32 IS 12x32 IS 14x32 IS
Type Prism binoculars
Magnication 10x 12x 14x
Objective lens effective
diameter 32 mm
Real eld of view 6° 5° 4.3°
Apparent eld of view
(Calculated based on
ISO 14132-1:2002)
55.3° 55.5°
Field of view at 1000 m / yds 105 m / 344 ft 87 m / 285 ft 75 m / 246 ft
Exit pupil diameter 3.2 mm 2.7 mm 2.3 mm
Eye relief 14.5 mm
Focusing distance range Approx. 2 m (6.6 ft) - innity
Image Stabilizer system Optical correction with lens-shift
Correction angle ±1°
Battery check Lamp (LED) turns on
Power
2 AA-size alkaline batteries
(AA-size nickel metal hydride batteries (Ni-MH)
can also be used.)
Operating environment Temperature: –10°C to 45°C / 14°F to 113°F
Humidity: 90%
Dimensions (W x H x D) 142 x 77 x 171 mm / 5.6 x 3.1 x 6.8 inch
Weight (Excluding batteries) Approx. 780 g / 27.6 oz
Approx. 775 g /
27.4 oz
ENG-14
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Do not make any changes or modifications to the equipment unless otherwise specified
in the instructions. If such changes or modifications should be made, you could be
required to stop operation of the equipmet.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is conected.
• Consult the dealer or an experienced radio/ TV technician for help.
CAN ICES-3 (B) / NMB-3 (B)
Only for European Union and EEA (Norway, Iceland and Liechtenstein)
These symbols indicate that this product is not to be disposed
of with your household waste, according to the WEEE Directive
(2012/19/EU), the Battery Directive (2006/66/EC) and/or
national legislation implementing those Directives.
If a chemical symbol is printed beneath the symbol shown
above, in accordance with the Battery Directive, this indicates
that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead)
is present in this battery or accumulator at a concentration
above an applicable threshold specified in the Battery Directive.
This product should be handed over to a designated collection point, e.g., on an
authorized one-for-one basis when you buy a new similar product or to an authorized
collection site for recycling waste electrical and electronic equipment (EEE) and
batteries and accumulators. Improper handling of this type of waste could have a
possible impact on the environment and human health due to potentially hazardous
substances that are generally associated with EEE. Your cooperation in the correct
disposal of this product will contribute to the effective usage of natural resources.
For more information about the recycling of this product, please contact your local city
office, waste authority, approved scheme or your household waste disposal service or
visit www.canon-europe.com/weee, or www.canon-europe.com/battery.
CT1-B033-A 0317Ni © CANON INC. 2017