EOS 200D
Introduction
Getting Started
- Setting Wi-Fi Settings
Connecting to a Smartphone via Wi-Fi
Connecting to Another Camera via Wi-Fi
- Establishing a Wi-Fi Connection
- Sending Images to the Other Camera
Connecting to Connect Station via Wi-Fi
- Saving Images
Connecting to EOS Utility via Wi-Fi
- Establishing a Wi-Fi Connection
- Operating the Camera Using EOS Utility
Connecting to a Printer via Wi-Fi
Sending Images to a Web Service
Advanced Wi-Fi Connection
Reconnecting via Wi-Fi
Checking and Operating Connection Settings
Troubleshooting Guide
Reference

Canon 200D + EF-S 18-55mm f/4-5.6 IS STM User Manual

Displayed below is the user manual for 200D + EF-S 18-55mm f/4-5.6 IS STM by Canon which is a product in the Digital Cameras category. This manual has pages.

Related Manuals

Canon M50 + EF-M 15-45mm f/3.5-6.3 IS STM + EF-M 55-200mm f/4.5-6.3 IS STM Manual

Canon M50 + EF-M 15-45mm f/3.5-6.3 IS STM + EF-M 22mm f/2 STM Manual

Wi-Fi (Wireless Communication) Function

Instruction Manual

ENGLISH

INSTRUCTION

MANUAL

Before Using This Camera

Note that Canon cannot be held liable for any loss or damage from

erroneous wireless communication settings when using the camera. In

addition, Canon cannot be held liable for any other loss or damage caused

by use of the camera.

When using wireless communication functions, establish appropriate

security at your own risk and discretion. Canon cannot be held liable for any

loss or damage caused by unauthorized access or other security breaches.

Introduction

What You Can Do Using the Wi-Fi



(Wireless Communication)

Functions

(CANON iMAGE

GATEWAY)

(6) Send images to a

Web service

(1) Communicate with a smartphone

(5) Print images using

a Wi-Fi printer

(3) Save images to

Canon Connect

Station

(4) Operate remotely

using EOS Utility

(2) Send images

between cameras

Introduction

(1)q Communicate with a smartphone (p.15)

Connect the camera to a smartphone or tablet via Wi-Fi and use the

dedicated application “Camera Connect” to operate the camera

remotely or view images stored in the camera.

In this manual and on the camera’s LCD monitor, “smartphone”

refers to smartphones and tablets.

(2)z Send images between cameras (p.59)

Connect this camera and other Canon cameras with built-in wireless

communication functions via Wi-Fi and send images between them.

(3)Save images to Connect Station (p.71)

Hold the camera close to Connect Station (sold separately) to

connect to it via Wi-Fi and save images to it.

(4)D Operate remotely using EOS Utility (p.75)

Connect the camera to a computer via Wi-Fi and operate the

camera remotely using EOS Utility (EOS software).

(5)l Print images using a Wi-Fi printer (p.81)

Connect the camera to a printer supporting PictBridge (Wireless

LAN) via Wi-Fi to print images.

(6)w Send images to a Web service (p.93)

Share images with your family and friends or share images using

various Web services via CANON iMAGE GATEWAY, an online

photo service for Canon users (free registration required).

Introduction

This camera can be connected easily to a smartphone compatible with

Bluetooth low energy technology* via Wi-Fi. For details, see page 18.

* Hereafter referred to as “Bluetooth”.

This camera is compatible with NFC (Near Field Communication) that

enables you to easily establish a Wi-Fi connection between the camera

and a smartphone or Connect Station (sold separately). For details, see

page 29.

This camera enables you to establish a Wi-Fi connection by displaying

the Wi-Fi function menu with the <k> button. For details, see the

pages describing how to connect the camera to each device or a Web

service via Wi-Fi.

Wi-Fi Connection Using the Bluetooth Function

Wi-Fi Connection Using the NFC Function

Wi-Fi Connection Using the <k> Button

In this manual, the term “access point” indicates wireless LAN

routers, etc. that relay Wi-Fi connections.

The camera does not come with an interface cable.

Icons in this Manual

<6> : Indicates the Main Dial.

<W><X><Y><Z>: Indicate up, down, left, and right on the <V>

cross keys respectively.

<0>: Indicates the Setting button.

* In addition to the above, the icons and symbols used on the camera’s buttons

and displayed on the LCD monitor are also used in this manual when discussing

relevant operations and functionality.

(p.**) : Reference page numbers for more information.

: Warnings to prevent potential problems during operation.

: Supplemental information.

Conventions Used in This Manual

This manual is structured as follows. After finishing preparation for a

Wi-Fi connection in “Getting Started”, see the corresponding pages to

set up a Wi-Fi connection according to your needs.

Structure of This Manual

1Getting Started (p.11)

2Connecting to a Smartphone

via Wi-Fi (p.15)

3Connecting to Another Camera

via Wi-Fi (p.59)

4Connecting to Connect Station

via Wi-Fi (p.71)

5Connecting to EOS Utility via

Wi-Fi (p.75)

6Connecting to a Printer via

Wi-Fi (p.81)

7Sending Images to a Web

Service (p.93)

8Advanced Wi-Fi

Connection (p.107)

Mainly describes how to

establish a Wi-Fi connection,

using an access point.

A smartphone or computer can

be connected to the camera via

Wi-Fi while maintaining a Wi-Fi

connection to an access point.

9Reconnecting via Wi-Fi (p.125)

Checking and Operating Connection Settings (p.133)

Troubleshooting Guide (p.139)

Reference (p.159)

Introduction 2

What You Can Do Using the Wi-Fi (Wireless Communication)

Functions ..........................................................................................2

Conventions Used in This Manual ....................................................5

Structure of This Manual ...................................................................6

Getting Started 11

Setting Wi-Fi Settings .....................................................................12

Connecting to a Smartphone via Wi-Fi 15

Selecting the Wi-Fi Connection Method .........................................16

Preparation for Smartphones ......................................................... 17

Connecting to a Bluetooth-compatible Smartphone via Wi-Fi ....... 18

Connecting to an NFC-compatible Smartphone via Wi-Fi ............. 29

Connecting to a Smartphone via Wi-Fi with the <k> Button ........34

Operating the Camera Using a Smartphone ..................................39

Terminating the Wi-Fi Connection ..................................................41

Sending Images to a Smartphone from the Camera ......................42

Specifying Viewable Images ...........................................................56

Connecting to Another Camera via Wi-Fi 59

Establishing a Wi-Fi Connection .....................................................60

Sending Images to the Other Camera ............................................ 62

Connecting to Connect Station via Wi-Fi 71

Saving Images ................................................................................72

Contents

5Connecting to EOS Utility via Wi-Fi 75

Establishing a Wi-Fi Connection .................................................... 76

Operating the Camera Using EOS Utility ....................................... 80

Connecting to a Printer via Wi-Fi 81

Establishing a Wi-Fi Connection .................................................... 82

Printing Images .............................................................................. 84

Print Settings .................................................................................. 87

Sending Images to a Web Service 93

Preparation for Web Services ........................................................ 94

Establishing a Wi-Fi Connection .................................................... 96

Sending Images to a Web Service ................................................. 97

Advanced Wi-Fi Connection 107

Checking the Type of Access Point ............................................. 109

Establishing a Wi-Fi Connection with WPS (PBC Mode) ..............110

Establishing a Wi-Fi Connection with WPS (PIN Mode) ...............114

Connecting to a Detected Network Manually via Wi-Fi .................118

Reconnecting via Wi-Fi 125

Reconnecting via Wi-Fi ................................................................ 126

Connecting to a Bluetooth-connected Smartphone via Wi-Fi ...... 128

Connecting to a Camera That Is Turned Off via Wi-Fi ................. 130

Registering Multiple Connection Settings .................................... 132

Contents

Checking and Operating Connection Settings 133

Changing or Deleting Connection Settings ...................................134

Clearing Wireless Communication Settings to Default .................136

View Info Screen ..........................................................................137

Troubleshooting Guide 139

Responding to Error Messages ....................................................140

Troubleshooting Guide .................................................................153

Wireless Communication Function Notes .....................................155

Security ......................................................................................... 157

Checking Network Settings ..........................................................158

Reference 159

[Wireless communication settings] Screen ..............................160

[Wi-Fi settings] Screen ................................................................161

Virtual Keyboard Operation ..........................................................162

Setting up the IP Address Manually .............................................163

Wireless Communication Status ...................................................165

Specifications ................................................................................167

Wireless Communication Function Precautions ...........................168

Index .............................................................................................170

Getting Started

This section describes how to prepare a Bluetooth

connection or Wi-Fi connection.

First, follow the steps below to set the Wi-Fi settings.

1Press the <k> button.

2Select [Wi-Fi settings].

3Select [Wi-Fi].

4Select [Enable].

Setting Wi-Fi Settings

You can also set the Wi-Fi settings with [Wi-Fi settings] under

[51: Wireless communication settings].

Setting Wi-Fi Settings

5Register [Nickname].

When the screen on the left appears,

press <0>.

The screen on the left will appear.

When using the displayed nickname,

press the <M> button.

Otherwise, enter any characters

between 1 to 8 characters in length.

For instructions on entering

characters, see page 162.

When you finish entering characters,

press the <M> button.

6Exit the setting.

When the screen on the left appears,

select [OK], then press <0>.

For information on each item on the

[Wi-Fi settings] screen, see page

161.

Setting Wi-Fi Settings

When video snapshot or time-lapse movie is set, you cannot select

[51: Wireless communication settings].

Interface Cable Connection Cautions

With a Wi-Fi connection established, you cannot use the camera by

connecting it to Connect Station, a computer, or another device with an

interface cable. Terminate the connection before connecting the interface

cable.

When the camera is connected to Connect Station, a computer, or

another device with an interface cable, you cannot select

[51: Wireless communication settings]. Disconnect the interface

cable before changing any settings.

Cards

The camera cannot be connected via Wi-Fi if there is no card in the

camera (except for [D]). Also, for [l] and Web services, the camera

cannot be connected via Wi-Fi if there are no images saved on the card.

Using the Camera with a Wi-Fi Connection Established

When you want to prioritize the Wi-Fi connection, do not operate the

power switch, card slot/battery compartment cover or other parts.

Otherwise, the Wi-Fi connection will be terminated.

Using an Eye-Fi Card

When [Wi-Fi] is set to [Enable], image transfer using an Eye-Fi card is

disabled.

Connecting to a

Smartphone via Wi-Fi

This section describes how to directly connect the

camera to a smartphone via Wi-Fi.

Connecting to a smartphone via Wi-Fi enables you to perform

the following:

• View images stored in the camera on a smartphone or save

viewed images to a smartphone.

• Operate the camera to take a picture or change camera

settings using a smartphone.

• Send images to a smartphone from the camera.

You can also follow the instructions in Camera Connect's

"Easy Connection Guide" to connect the camera to a

smartphone via Wi-Fi.

Set [Wi-Fi] to [Enable] on the [Wi-Fi settings] screen in

advance (p.12).

Install Camera Connect on the smartphone before setting

up a connection (p.39).

To connect via Wi-Fi using an access point, see “Advanced Wi-Fi

Connection” (p.107).

You can select the following Wi-Fi connection methods according to the

functions and usage status of the smartphone.

By connecting to a Bluetooth-compatible smartphone via Bluetooth

in advance, you can connect via Wi-Fi simply by performing an

operation on the camera and smartphone.

You can automatically connect to an NFC-compatible smartphone

via Wi-Fi by touching it to the camera.

You can use Wi-Fi to connect to a smartphone that is not compatible

with Bluetooth or NFC or a smartphone that cannot use its Bluetooth

or NFC function.

You can connect to a smartphone via an access point (p.109).

Selecting the Wi-Fi Connection Method

Connecting to a Bluetooth-compatible Smartphone via

Wi-Fi (p.18)

Connecting to an NFC-compatible Smartphone via Wi-Fi

(p.29)

Connecting to a Smartphone via Wi-Fi from the <k>

button (p.34)

To connect the camera to a smartphone, a smartphone on which

Android or iOS is installed is necessary. In addition, the dedicated

application Camera Connect (free of charge) must be installed on the

smartphone.

When an NFC-compatible smartphone is touched to the camera

before installing Camera Connect, the download screen of Camera

Connect will be displayed on the smartphone.

Camera Connect can be installed from the Google Play or App

Store. The Google Play or App Store can also be accessed using the

QR codes that appear when registering the camera to a smartphone

(p.20, 35).

Preparation for Smartphones

iOSAndroid

For the operating system versions supported by Camera Connect, refer

to the download site of Camera Connect.

Interface or functions of the camera and Camera Connect are subject to

change for firmware update of the camera or application update of

Camera Connect, Android, iOS, etc. In such a case, features of the

camera or Camera Connect may differ from sample screens or operation

instructions in this manual.

An application is required to read the QR codes.

This section describes how to use the Bluetooth function to connect to a

Bluetooth-compatible smartphone via Wi-Fi.

When you connect the camera to a Bluetooth-compatible smartphone

via Bluetooth, you can establish a Wi-Fi connection by operating only

the camera or the smartphone.

Note that pairing between the camera and smartphone is required to

connect the camera to a smartphone via Bluetooth.

Connecting to a Bluetooth-compatible

Smartphone via Wi-Fi

Bluetooth Connection

Pairing and Bluetooth connection are not possible if the camera is

connected to Connect Station, a computer, or another device with an

interface cable.

Pairing is not possible while shooting with the camera.

The camera cannot be connected to two or more devices at the same

time via Bluetooth.

If you connect the camera to a smartphone via Wi-Fi while the camera is

connected to Wireless Remote Control BR-E1 (sold separately) via

Bluetooth, the Bluetooth connection with the wireless remote controller

will be terminated.

Bluetooth connection consumes battery power even after the camera’s

auto power off has activated. Therefore, the battery level may be low

when you use the camera.

The paired smartphone is registered to the camera.

This camera can be connected to Wireless Remote Control BR-E1 via

Bluetooth for remote shooting. For details, refer to Wireless Remote

Control BR-E1 Instruction Manual.

Connecting to a Bluetooth-compatible Smartphone via Wi-Fi

Operation on the Camera-1

1Select the [Function settings] tab.

Press the <M> button to display

the main tabs.

Select the [Function settings] tab,

then press <0>.

2Select [Wireless communication

settings].

Under the [51] tab, select [Wireless

communication settings], then

press <0>.

3Select [Bluetooth function].

4Select [Bluetooth function].

Establishing a Bluetooth Connection

Connecting to a Bluetooth-compatible Smartphone via Wi-Fi

5Select [Smartphone].

6Select [Pairing].

7Select [Do not display].

If Camera Connect is already

installed, select [Do not display] and

press <0>.

If Camera Connect is not installed,

select [Android] or [iOS] on the

screen on the left, scan the displayed

QR code with the smartphone, then

access Google Play or the App Store

and install Camera Connect.

The screen on the left will appear and

pairing will start.

Connecting to a Bluetooth-compatible Smartphone via Wi-Fi

Operation on the Smartphone

8Enable the Bluetooth function.

Enable the Bluetooth function on the

settings screen of the smartphone.

9Start Camera Connect.

Tap on the Camera Connect icon to

start the application.

Select the camera to pair with.

Tap on the nickname of the camera to

be paired.

If you are using an Android

smartphone, proceed to step 12.

11 Tap on [Pair] (iOS only).

When the screen on the left appears,

tap on [Pair].

Connecting to a Bluetooth-compatible Smartphone via Wi-Fi

Operation on the Camera-2

Select [OK].

Press <0>.

Pairing will complete and the camera

will be connected to the smartphone

via Bluetooth.

An illustration indicating that a

Bluetooth connection has been

established will appear on the main

window of Camera Connect.

With a Bluetooth connection established, you can operate the camera to

send images to the smartphone. For details, see page 42.

You can retrieve location information from a smartphone and add it to

captured images while connected via Bluetooth. For more information,

refer to "Geotagging Images" in the Camera Instruction Manual.

Connecting to a Bluetooth-compatible Smartphone via Wi-Fi

When a Bluetooth connection is established, follow the steps below to

establish a Wi-Fi connection.

Android

1Select a Camera Connect

function.

Select the Camera Connect function

you want to use.

For the Camera Connect functions,

see page 39.

A Wi-Fi connection will be established

automatically.

When a Wi-Fi connection is

established, the screen for the

selected function will appear.

The [qWi-Fi on] screen will appear

on the camera’s LCD monitor.

An illustration indicating that a Wi-Fi

connection has been established will

appear on the main window of

Camera Connect.

The Wi-Fi connection to a Bluetooth-compatible smartphone is

now complete.

Establishing a Wi-Fi Connection

Connecting to a Bluetooth-compatible Smartphone via Wi-Fi

iOS

1Select a Camera Connect

function.

Select the Camera Connect function

you want to use.

For the Camera Connect functions,

see page 39.

2Check the SSID and password.

Check the SSID (network name) and

password displayed on the camera.

3Operate the smartphone to

establish a Wi-Fi connection.

On the smartphone’s Wi-Fi function

screen, select the SSID checked in

step 2.

“_Canon0A” is displayed at the end

of the SSID.

For the password, enter the password checked in step 2.

Display the Camera Connect screen.

When a Wi-Fi connection is established, the screen for the selected

function will appear.

Password

SSID (network name)

Connecting to a Bluetooth-compatible Smartphone via Wi-Fi

The [qWi-Fi on] screen will appear

on the camera’s LCD monitor.

An illustration indicating that a Wi-Fi

connection has been established will

appear on the main window of

Camera Connect.

The Wi-Fi connection to a Bluetooth-compatible smartphone is

now complete.

For how to terminate the Wi-Fi connection, see “Terminating the

Wi-Fi Connection” (p.41).

Terminating the Wi-Fi connection will switch the camera to the

Bluetooth connection.

To reconnect via Wi-Fi, see “Reconnecting via Wi-Fi” (p.125).

[qWi-Fi on] Screen

Disconnect,exit

Terminates the Wi-Fi connection.

Confirm set.

You can check the settings.

Error details

When a Wi-Fi connection error occurs, you can check the details of

the error.

To switch to the menu, press the <M> button.

For cautions on connecting via Wi-Fi, see page 18.

Connecting to a Bluetooth-compatible Smartphone via Wi-Fi

On the [Bluetooth function] screen, you can change or check the

Bluetooth function settings.

Bluetooth function

Select the device to pair with the

camera.

If you will not use the Bluetooth

function, select [Disable].

Pairing

Pair the camera with the device

selected in [Bluetooth function].

Check/clear connection info

You can check the name and

communication status of the paired

device.

To remove the paired device, press

the button. For details, see

“Removing a Paired Device’s

Registration” (p.28).

[Bluetooth function] Screen

Connecting to a Bluetooth-compatible Smartphone via Wi-Fi

Bluetooth address

You can check the camera’s

Bluetooth address.

Stay conn. if off (Stay connected

if the camera is turned off)

If you select [Enable], you can use

Wi-Fi to connect a smartphone to the

camera when it is turned off to view

images in the camera, etc. For more

information, see "Connecting to a

Camera That Is Turned Off via Wi-Fi"

(p.130).

Connecting to a Bluetooth-compatible Smartphone via Wi-Fi

To pair the camera with another smartphone, remove the currently

paired device’s registration.

Operation on the Camera

1Select [Check/clear connection

info].

On the [Bluetooth function] screen

(p.19), select [Check/clear

connection info], then press <0>.

2Press the button.

3Remove the device registration.

When the screen on the left appears,

select [OK], then press <0>.

Operation on the Smartphone

4Remove the camera registration.

In the Bluetooth settings of the

smartphone, select the nickname of

the camera to remove registration for.

Removing a Paired Device’s Registration

An NFC-compatible smartphone can be connected via Wi-Fi by

touching it to the camera.

This section describes how to connect to an NFC-compatible

smartphone via Wi-Fi.

Smartphones labeled with the p mark are NFC-compatible.

Some smartphones are NFC-compatible even if they are not labeled

with the p mark. In such a case, check the NFC antenna position by

referring to the smartphone’s instruction manual.

Set [Wi-Fi] to [Enable] and [NFC connection] to [Enable] on the

[Wi-Fi settings] screen in advance (p.12 and p.161).

Connecting to an NFC-compatible

Smartphone via Wi-Fi

A Wi-Fi connection may not be established with the NFC function even if

the smartphone is NFC-compatible. In such a case, establish a Wi-Fi

connection using the procedure in “Connecting to a Smartphone via Wi-

Fi with the <k> Button” (p.34) or “Advanced Wi-Fi Connection” (p.107).

The camera cannot be connected to two or more smartphones at the

same time.

Connecting to an NFC-compatible Smartphone via Wi-Fi

When touching the smartphone to the camera, be careful not to drop the

camera or smartphone.

Do not touch the smartphone to the camera with too much force. Doing

so can scratch the camera or smartphone.

Just holding the smartphone close to the camera may not establish a

connection. Be sure to touch the camera with the smartphone so that

they come into contact with each other.

Recognition may be difficult depending on the smartphone. Touch slowly

while changing the position or rotating horizontally. If connection is not

established, keep the camera and smartphone together until the camera

screen is updated.

Another application on the smartphone may start depending on how you

touch. Check the position of the p mark, then touch again.

When touching the smartphone to the camera, do not leave anything

between the camera and smartphone. In addition, when a case is

attached to the camera or smartphone, Wi-Fi connection with the NFC

function may not be possible.

A Wi-Fi connection cannot be established with the NFC function between

this camera and a smartphone while they are connected via Bluetooth.

To connect this camera to an NFC-compatible smartphone via Wi-Fi, the

smartphone’s Wi-Fi and NFC functions must be enabled.

NFC Function Cautions

A Wi-Fi connection cannot be established with the NFC function between

this camera and another NFC-compatible device such as a camera or

printer.

A Wi-Fi connection cannot be established with the NFC function while

shooting with this camera, when there is no card, when the LCD monitor

is closed with the screen facing inward, or while the camera is connected

to another device with an interface cable.

If you do not know whether your smartphone is NFC-compatible, contact

the manufacturer of the smartphone.

For information on the Wi-Fi settings and NFC settings of the

smartphone and the position of the NFC antenna, refer to the

smartphone's instruction manual.

Connecting to an NFC-compatible Smartphone via Wi-Fi

1Enable the NFC function on the

camera and smartphone

(p.161).

2Touch a smartphone to the

camera.

If the download site of Camera

Connect appears on the smartphone,

install Camera Connect (p.39).

If an image is being played back on

the camera, press the <3> button to

end the playback.

Touch the p mark on the smartphone

to that on the camera so that they

come into contact with each other.

When a message indicating the

connection is being established is

displayed on the camera’s LCD

monitor, move the smartphone away

from the camera.

Camera Connect starts on the

smartphone and establishes a

connection.

Establishing a Wi-Fi Connection

Connecting to an NFC-compatible Smartphone via Wi-Fi

3Establish a Wi-Fi connection.

When a connection is established,

the screen on the left will appear on

the camera’s LCD monitor. When

connecting to the same smartphone

via NFC, this screen will not appear

again.

To specify viewable images, press the

button. See step 6 on page

57 to set them.

If you select [OK] and press <0>,

a message indicating that the

connection has been established is

displayed and the [qWi-Fi on] screen

is displayed.

Connecting to an NFC-compatible Smartphone via Wi-Fi

The main window of Camera Connect

will be displayed on the smartphone.

The Wi-Fi connection to a smartphone

is now complete.

Operate the camera using Camera

Connect. See page 39.

For how to terminate the Wi-Fi connection, see “Terminating the

Wi-Fi Connection” (p.41).

To reconnect via Wi-Fi, see “Reconnecting via Wi-Fi” (p.125).

[qWi-Fi on] Screen

Disconnect,exit

Terminates the Wi-Fi connection.

Confirm set.

You can check the settings.

Error details

When a Wi-Fi connection error occurs, you can check the details of

the error.

To switch to the menu, press the <M> button.

Operation on the Camera-1

1Press the <k> button.

2Select [q] (Connect to

smartphone).

If the history (p.126) is displayed,

switch the screen with the <Y> <Z>

keys.

3Select [Register a device for

connection].

Connecting to a Smartphone via Wi-Fi

with the <k> Button

Connecting to a Smartphone via Wi-Fi with the <k> Button

4Select [Do not display].

If Camera Connect is already

installed, select [Do not display] and

press <0>.

If Camera Connect is not installed,

select [Android] or [iOS] on the

screen on the left, scan the displayed

QR code with the smartphone, then

access Google Play or the App Store

and install Camera Connect.

5Check the SSID and password.

Check the SSID (network name) and

password displayed on the camera’s

LCD monitor.

“_Canon0A” is displayed at the end

of the SSID.

In [Wi-Fi settings], if you set

[Password] to [None], the password

will not be displayed or required. For

details, see page 161.

Password

SSID (network name)

By selecting [Switch network] in step 5, you can establish a Wi-Fi

connection via an access point (p.109).

Connecting to a Smartphone via Wi-Fi with the <k> Button

Operation on the Smartphone

6Operate the smartphone to

establish a Wi-Fi connection.

Activate the smartphone’s Wi-Fi

function, then select the SSID

(network name) checked in step 5.

For the password, enter the password

checked in step 5.

7Start Camera Connect.

When the [Waiting to connect]

screen is displayed on the camera’s

LCD monitor, start Camera Connect

on the smartphone.

8Select the camera to connect to

via Wi-Fi.

Select and tap on the camera to

connect to via Wi-Fi from [Cameras]

on Camera Connect.

Smartphone’s screen

(sample)

Connecting to a Smartphone via Wi-Fi with the <k> Button

Operation on the Camera-2

9Establish a Wi-Fi connection.

When a connection is established,

the screen on the left will appear on

the camera’s LCD monitor.

To specify viewable images, press the

button. See step 6 on page

57 to set them.

If you select [OK] and press <0>,

a message indicating that the

connection has been established is

displayed and the [qWi-Fi on] screen

is displayed.

Connecting to a Smartphone via Wi-Fi with the <k> Button

The main window of Camera Connect

will be displayed on the smartphone.

The Wi-Fi connection to a smartphone

is now complete.

Operate the camera using Camera

Connect. See page 39.

For how to terminate the Wi-Fi connection, see “Terminating the

Wi-Fi Connection” (p.41).

To reconnect via Wi-Fi, see “Reconnecting via Wi-Fi” (p.125).

[qWi-Fi on] Screen

Disconnect,exit

Terminates the Wi-Fi connection.

Confirm set.

You can check the settings.

Error details

When a Wi-Fi connection error occurs, you can check the details of

the error.

To switch to the menu, press the <M> button.

With a Wi-Fi connection established, you can send images to a smartphone

from the camera menu ([Send images to smartphone]) or from the Quick

Control screen during playback. For details, see page 42.

You can use a smartphone with Camera Connect installed to view

images stored in the camera or perform remote shooting, etc.

The main functions of Camera Connect

are described below.

Images on camera

Images stored in the camera can be

viewed.

Images stored in the camera can be

saved on a smartphone.

Operations such as deletion can be

performed on images stored in the

camera.

Remote live view shooting

The camera’s Live View image can be viewed on a smartphone.

You can shoot with remote operation.

Location information

Not supported on this camera.

Camera settings

Camera settings can be changed.

Operating the Camera Using a Smartphone

Camera Connect Main Window

Operating the Camera Using a Smartphone

When the Wi-Fi connection is terminated while recording a movie with

remote shooting, the camera responds as follows:

• When the power switch is set to <k>, movie shooting continues.

• When the power switch is set to <1>, movie shooting stops.

When the power switch is set to <1> and the movie shooting mode is

set using Camera Connect, you cannot shoot by operating the camera.

With a Wi-Fi connection to a smartphone established, certain functions

are unavailable.

In remote shooting, the AF speed may become slower.

Depending on the communication status, image display or shutter

release may be delayed.

When saving images to a smartphone, you cannot take a picture even if

you press the camera’s shutter button. Also, the camera’s LCD monitor

may turn off.

Even if MOV-format movies are displayed in the list, they cannot be

saved to a smartphone.

The Wi-Fi connection will be terminated if you set the camera’s power to

<2> or open the card slot/battery compartment cover.

RAW images cannot be saved to a smartphone. When a RAW image is

selected, it will be saved as a JPEG image.

With a Wi-Fi connection established, the camera’s auto power off does

not function.

With a Wi-Fi connection established, disabling the smartphone’s power

saving function is recommended.

To terminate the Wi-Fi connection, perform either of the following

operations.

On the smartphone’s Camera

Connect screen, tap on [ ].

On the camera’s [qWi-Fi on]

screen, select [Disconnect,exit].

If the [qWi-Fi on] screen is not

displayed, press the <k> button.

Select [Disconnect,exit], then select

[OK] on the confirmation dialog to

terminate the Wi-Fi connection.

Terminating the Wi-Fi Connection

You can use the following methods to send images to a smartphone

from the camera.

(1) Selecting [Send images to smartphone] to send images

(2) Sending images from the Quick Control screen during playback

(p.44)

(3) Using the NFC function to send images during image playback (p.

)

Select [Send images to smartphone] from the camera menu and send

images.

1Connect the camera to a

smartphone via Bluetooth

(Android only) or Wi-Fi (p.23).

2Select [Wireless communication

settings].

Under the [51] tab, select [Wireless

communication settings], then

press <0>.

3Select [Send images to

smartphone].

If you perform this step while

connected via Bluetooth, a message

is displayed and the connection

switches to a Wi-Fi connection.

Sending Images to a Smartphone from the Camera

(1) Selecting [Send images to smartphone] to Send Images

Sending Images to a Smartphone from the Camera

4Select an image to send.

Press the <Y> <Z> keys of the

cross keys to select an image to

send, then press <0>.

By pressing the button, you

can switch to the index display and

select an image.

5Select [Send img shown].

To select a size at which to send the

image, select [Resize image] and

press <0>.

Select [Send img shown] and press

<0> to send the image displayed.

When the transfer is complete, the

screen for step 4 will reappear.

To send another image, repeat steps

4 and 5.

Sending Images to a Smartphone from the Camera

Send images from the Quick Control screen during playback.

1Connect the camera to a

smartphone via Bluetooth

(Android only) or Wi-Fi (p.23).

2Play back the image.

Press the <3> button to play back

images.

3Press the <Q> button.

The Quick Control screen will appear.

4Select [q].

If you perform this step while

connected via Bluetooth, a message

is displayed and the connection

switches to a Wi-Fi connection.

(2) Sending Images from the Quick Control Screen During

Playback

Sending Images to a Smartphone from the Camera

5Select an image to send.

Press the <Y> <Z> keys of the

cross keys to select an image to

send, then press <0>.

By pressing the button, you

can switch to the index display and

select an image.

6Select [Send img shown].

To select a size at which to send the

image, select [Resize image] and

press <0>.

Select [Send img shown] and press

<0> to send the image displayed.

When the transfer is complete, the

screen for step 5 will reappear.

To send another image, repeat steps

5 and 6.

Sending Images to a Smartphone from the Camera

By touching an NFC-compatible smartphone to the camera while

playing back an image on the camera, you can establish a Wi-Fi

connection automatically and send the image to the smartphone even if

a Bluetooth or Wi-Fi connection has not been established beforehand.

1Play back the image.

Press the <3> button to play back

images.

2Touch a smartphone to the

camera.

Touch the p mark on the smartphone

to that on the camera so that they

come into contact with each other.

When a message indicating the

established connection is displayed

on the camera’s LCD monitor, move

the smartphone away.

3Select an image to send.

Press the <Y> <Z> keys of the

cross keys to select an image to

send, then press <0>.

By pressing the button, you

can switch to the index display and

select an image.

To send multiple images, see the

operations from page 48 and onward.

(3) Using the NFC Function to Send Images During Image

Playback

Sending Images to a Smartphone from the Camera

4Select [Send img shown].

To select a size at which to send the

image, select [Resize image] and

press <0>.

Select [Send img shown] and press

<0> to send the image displayed.

When the transfer is complete, the

screen for step 3 will reappear.

To send another image, repeat steps

3 and 4.

Sending Images to a Smartphone from the Camera

Select multiple images and send them at once.

If the multiple image selection screen is already displayed, start the

operation from step 3.

Selecting Multiple Images to Send

1Press <0>.

2Select [Send selected].

3Select the images to send.

Press the <Y> <Z> keys of the

cross keys to select an image to

send, then press <0>.

A checkmark [X] will be displayed on

the upper left of the screen.

By pressing the button, you

can select images from a three-image

display. To return to the single-image

display, press the button.

To select another image to send,

repeat step 3.

After selecting the images to send,

press the <g> button.

Sending Multiple Images

Sending Images to a Smartphone from the Camera

4Select [Resize image].

Set it as necessary.

On the displayed screen, select an

image size, then press <0>.

5Select [Send].

The images will be sent. When the

transfer is complete, the screen for

step 1 will reappear.

To send another image, repeat steps

1 to 5.

Sending Images to a Smartphone from the Camera

Sending a Specified Range of Images

Specify the range of images to send all the images in the range at once.

1Press <0>.

2Select [Send range].

3Specify the range of images.

Select the first image (start point),

then press <0>.

Select the last image (end point),

then press <0>.

The [X] icon will appear on the

selected images.

To cancel the selection, repeat this

step.

You can press the button or

button to change the number

of images shown in the index display.

Sending Images to a Smartphone from the Camera

4Confirm the range.

Press the <g> button.

5Select [Resize image].

Set it as necessary.

On the displayed screen, select an

image size, then press <0>.

6Select [Send].

The images will be sent. When the

transfer is complete, the screen for

step 1 will reappear.

Sending Images to a Smartphone from the Camera

Sending All Images on the Card

Send all the images on the card at once.

1Press <0>.

2Select [Send all card].

3Select [Resize image].

Set it as necessary.

On the displayed screen, select an

image size, then press <0>.

4Select [Send].

The images will be sent. When the

transfer is complete, the screen for

step 1 will reappear.

Sending Images to a Smartphone from the Camera

Sending Images that Match the Search Conditions

Send all the images that match the search conditions set in [Set image

search conditions] at once.

For [Set image search conditions], refer to “Filtering Images for

Playback” in the Camera Instruction Manual.

1Press <0>.

2Select [Send all found].

3Select [Resize image].

Set it as necessary.

On the displayed screen, select an

image size, then press <0>.

4Select [Send].

The images will be sent. When the

transfer is complete, the screen for

step 1 will reappear.

Sending Images to a Smartphone from the Camera

When You Send Images by Operating the Camera while

Connected via Bluetooth (Android Only)

When You Use the NFC Function to Send Images During Image

Playback

Press the <M> button on the

image transfer screen.

Select [OK] on the screen on the left,

then press <0> to end the image

transfer and terminate the Wi-Fi

connection.

When You Send Images by Operating the Camera while

Connected via Wi-Fi

Press the <M> button on the

image transfer screen.

The previous screen is displayed.

The Wi-Fi connection will not be

terminated.

For information on terminating the Wi-

Fi connection, see "Terminating the

Wi-Fi Connection" (p.41).

Ending Image Transfer

Sending Images to a Smartphone from the Camera

If necessary, also read “NFC Function Cautions” (p.30).

During the image transfer operation, a picture cannot be taken even if

the camera’s shutter button is pressed.

Images cannot be sent using the NFC function while the camera is

connected to another device via Wi-Fi. In addition, the camera cannot be

connected to multiple smartphones via Wi-Fi at the same time.

Even if MOV-format movies are displayed in the list, they cannot be

saved to a smartphone.

You can cancel the image transfer by selecting [Cancel] during the

transfer.

You can select up to 999 files at a time.

With a Wi-Fi connection established, disabling the smartphone’s power

saving function is recommended.

When using the NFC function while playing back an image, device

registration will not be performed.

When you reduce the image size, all images to be sent at the same time

are resized. Note that movies and b size still photos are not reduced.

When you use a battery to power the camera, make sure it is fully

charged.

You can specify images viewable on a smartphone by operating the

camera. Images can be specified after the Wi-Fi connection is

terminated.

1Press the <k> button.

2Select [q].

If the history (p.126) is displayed,

switch the screen with the <Y> <Z>

keys.

3Select [Edit device information].

4Select a smartphone.

Select the smartphone on which you

want to make the images viewable.

Specifying Viewable Images

When reconnecting to a smartphone, check the settings of viewable images

before establishing a connection.

Specifying Viewable Images

5Select [Viewable imgs].

6Select an item.

Select [OK] and press <0> to

display the setting screen.

[All images]

All images stored on the card become viewable.

[Images from past days]

Specify viewable images on the

shooting-date basis. Images shot up to

nine days ago can be specified.

Select an item, then press <0>.

When [Images shot in past days] is

selected, images shot up to the

specified number of days before the

current date become viewable. When

<r> is shown for the number of

days, press the <W> <X> keys to

specify the number of days, then

press <0> to confirm the selection.

Select [OK] and press <0> to

specify the viewable images.

If [Viewable imgs] is set to any setting other than [All images], remote

shooting is not possible.

Specifying Viewable Images

[Select by rating]

Specify viewable images depending on

whether a rating is appended (or not

appended) or by the type of rating.

Select a rating, then press <0> to

specify the viewable images.

[File number range] (Select range)

Select the first and last images from

images arranged by the file number to

specify the viewable images.

1Press <0> to display the image

selection screen.

Select an image using the <Y> <Z>

keys.

By pressing the button, you

can switch to the index display and

select an image.

2 Select the first image and press

<0> to set it.

3 Use the <Z> button to select the last

image, and press <0> to confirm.

Select an image shot later than the

image selected as the first image.

4 When the first and last images are

specified, select [OK], then press

<0>.

First image Last image

Connecting to Another

Camera via Wi-Fi

This section describes how to send and receive images

between two cameras via Wi-Fi.

Set [Wi-Fi] to [Enable] on the [Wi-Fi settings] screen in

advance (p.12).

Wi-Fi connection is possible with Canon cameras with built-in

Wi-Fi functions released in and after 2012 supporting image

transfer between cameras. Note that the camera cannot be

connected to Canon camcorders via Wi-Fi, even if they have

built-in Wi-Fi functions.

The camera can be connected to only one camera at a time.

Still photos can be transferred only if their file format is JPEG.

For movies, a send error may occur or the sent movies may not

be played back depending on the target camera’s functionality

and file format of the movies. (MP4-format movies cannot be

sent to cameras that are not compatible with playback of MP4-

format movies.)

1Press the <k> button.

2Select [z] (Transfer imgs

between cameras).

If the history (p.126) is displayed,

switch the screen with the <Y> <Z>

keys.

3Select [Register a device for

connection].

4Set up the target camera.

When the screen on the left is

displayed on the camera, set up the

Wi-Fi connection on the target

camera as well. For the operation

procedure, refer to the instruction

manual of the target camera.

When a Wi-Fi connection is

established, an image on the card will

appear.

Establishing a Wi-Fi Connection

5Select the images to send.

Select images on the camera sending

the images (p.62).

Do not operate the camera receiving

the images.

Note that GPS information is not displayed on the camera’s playback screen

even if GPS information is appended to the received image. Shooting

locations can be viewed on a virtual map, using Map Utility (EOS software).

The connection settings are saved/registered with the nickname of the

camera to which a Wi-Fi connection was established.

With a Wi-Fi connection established, the camera’s auto power off does

not function.

Select and send images individually.

1Select an image to send.

Press the <Y> <Z> keys of the

cross keys to select an image to

send, then press <0>.

By pressing the button, you

can switch to the index display and

select an image.

2Select [Send img shown].

To select a size at which to send the

image, select [Resize image] and

press <0>.

Select [Send img shown] and press

<0> to send the image displayed.

When the transfer is complete, the

screen for step 1 will reappear.

To send another image, repeat steps

1 and 2.

3Terminate the Wi-Fi connection.

Press the <k> button to display the

confirmation dialog. Select [OK], then

press <0> to terminate the

connection.

Sending Images to the Other Camera

Sending Images Individually

Sending Images to the Other Camera

Select multiple images to send them at once.

1Press <0>.

2Select [Send selected].

3Select the images to send.

Press the <Y> <Z> keys of the

cross keys to select an image to

send, then press <0>.

A checkmark [X] will be displayed on

the upper left of the screen.

By pressing the button, you

can select images from a three-image

display. To return to the single-image

display, press the button.

To select another image to send,

repeat step 3.

After selecting the images to send,

press the <g> button.

Sending Multiple Selected Images

Sending Images to the Other Camera

4Select [Resize image].

Set it as necessary.

On the displayed screen, select an

image size, then press <0>.

5Select [Send].

The images will be sent. When the

transfer is complete, the screen for

step 1 will reappear.

To send another image, repeat steps

1 to 5.

6Terminate the Wi-Fi connection.

Press the <k> button to display the

confirmation dialog. Select [OK], then

press <0> to terminate the

connection.

Sending Images to the Other Camera

Specify the range of images to send all the images in the range at once.

1Press <0>.

2Select [Send range].

3Specify the range of images.

Select the first image (start point),

then press <0>.

Select the last image (end point),

then press <0>.

Images will be selected and [X] will

appear.

To cancel the selection, repeat this

step.

You can press the button or

button to change the number

of images shown in the index display.

4Confirm the range.

Press the <g> button.

To return to the previous screen,

press the <M> button.

Sending a Specified Range of Images

Sending Images to the Other Camera

5Select [Resize image].

Set it as necessary.

On the displayed screen, select an

image size, then press <0>.

6Select [Send].

The images will be sent. When the

transfer is complete, the screen for

step 1 will reappear.

7Terminate the Wi-Fi connection.

Press the <k> button to display the

confirmation dialog. Select [OK], then

press <0> to terminate the Wi-Fi

connection.

Sending Images to the Other Camera

Send all the images on the card at once.

1Press <0>.

2Select [Send all card].

3Select [Resize image].

Set it as necessary.

On the displayed screen, select an

image size, then press <0>.

4Select [Send].

The images will be sent. When the

transfer is complete, the screen for

step 1 will reappear.

Sending All Images on the Card

Sending Images to the Other Camera

5Terminate the Wi-Fi connection.

Press the <k> button to display the

confirmation dialog. Select [OK], then

press <0> to terminate the Wi-Fi

connection.

Send all the images that match the search conditions set in [Set image

search conditions] at once.

For [Set image search conditions], refer to “Filtering Images for

Playback” in the Camera Instruction Manual.

1Press <0>.

2Select [Send all found].

Sending Images that Match the Search Conditions

Sending Images to the Other Camera

3Select [Resize image].

Set it as necessary.

On the displayed screen, select an

image size, then press <0>.

4Select [Send].

The images will be sent. When the

transfer is complete, the screen for

step 1 will reappear.

5Terminate the Wi-Fi connection.

Press the <k> button to display the

confirmation dialog. Select [OK], then

press <0> to terminate the Wi-Fi

connection.

Sending Images to the Other Camera

With a Wi-Fi connection established, a picture cannot be taken even if

the camera’s shutter button is pressed.

To terminate the Wi-Fi connection during image transfer, select [Cancel]

on the camera, then terminate the Wi-Fi connection.

RAW images cannot be sent.

When sending a large number of images or large files (total size), make

sure to check the remaining battery level.

Depending on the functionality of the target camera, the movie files will

be converted when they are sent. Therefore, transfer may take longer

than usual.

You can select up to 999 files at a time.

When you reduce the image size, all images to be sent at the same time

are resized. Note that movies and b size still photos are not reduced.

[Resize:S2] is enabled only for still photos shot with cameras of the

same model as this camera. Still photos shot with other models are sent

without resizing.

You can cancel the image transfer by selecting [Cancel] during the

transfer. When [Cancel] is selected on the camera sending the images,

the image selection screen will reappear. When [Cancel] is selected on

the camera receiving the images, the connection will be terminated.

Connecting to

Connect Station via Wi-Fi

Connect Station (sold separately) is a device that allows

you to import captured still photos and movies for

viewing on your TV set, smartphone, etc., or sharing

over a network.

This section describes how to connect the camera and

Connect Station (sold separately) via Wi-Fi using the

NFC function to save still photos and movies.

Set [Wi-Fi] to [Enable] and [NFC connection] to [Enable]

on the [Wi-Fi settings] screen in advance (p.12 and p.161).

Update the Connect Station firmware to the latest version.

For information on saving images to Connect Station without using

the NFC function, refer to the Connect Station's instruction

manual.

1Hold the camera close to Connect

Station.

Turn on the camera and Connect

Station, then hold the camera’s p

mark close to the Connect Station’s

NFC connect point.

When a message indicating the Wi-Fi

connection is being established is

displayed on the camera’s LCD

monitor and Connect Station

responds, move the camera away

from Connect Station.

When a Wi-Fi connection is

established, Connect Station checks

the images on the memory card, then

saves only the unsaved images.

2Terminate the Wi-Fi connection.

After images are saved, the screen

on the left will appear on the camera’s

LCD monitor. Press <0> to

terminate the Wi-Fi connection.

Saving Images

NFC connect point

Saving Images

If necessary, also read “NFC Function Cautions” (p.30).

While saving images, a picture cannot be taken even if the camera’s

shutter button is pressed.

Do not drop the camera on Connect Station or touch the camera to it with

too much force. Doing so may damage Connect Station’s internal hard

disk.

If the camera is not recognized right away, try holding it close to Connect

Station and slowly moving it or rotating it horizontally.

Just holding the camera close to Connect Station may not establish a

connection. In such a case, gently touch Connect Station with the

camera.

When holding the camera close to Connect Station, do not leave

anything between the camera and Connect Station. In addition, when a

case is attached to the camera, a Wi-Fi connection may not be

established with the NFC function.

If the camera and Connect Station are moved too far away from each

other while saving images, saving may take time or the Wi-Fi connection

may be terminated.

If the camera’s battery runs out while saving images, saving will stop.

Charge the battery, then try again.

When all images are already saved, saving will not be performed. In

such a case, select [OK] to terminate the Wi-Fi connection.

When there are a large number of images on the memory card, it may

take time to check and save the images.

While saving images, the camera’s auto power off does not function.

Connecting to

EOS Utility via Wi-Fi

This section describes how to connect the camera

directly to a computer via Wi-Fi.

You can connect to a computer via Wi-Fi to remotely

operate the camera using the EOS Utility (EOS

software).

Install EOS Utility on the computer before setting up a Wi-Fi

connection.

Set [Wi-Fi] to [Enable] on the [Wi-Fi settings] screen in

advance (p.12).

Settings may be disabled when an older version of software is

used. Install a version of EOS Utility that is compatible with this

camera.

To establish a Wi-Fi connection, operations on the computer are

required. For details, refer to the computer's instruction manual.

To connect via Wi-Fi using an access point, see "Advanced Wi-

Fi Connection" (p.107).

The procedure for Windows 8.1 is used here as an example.

1Press the <k> button.

2Select [D] (Remote control (EOS

Utility)).

If the history (p.126) is displayed,

switch the screen with the <Y> <Z>

keys.

3Select [Register a device for

connection].

4Check the SSID and password.

Check the SSID (network name) and

password displayed on the camera’s

LCD monitor.

In [Wi-Fi settings], if you set

[Password] to [None], the password

will not be displayed or required. For

details, see page 161.

Establishing a Wi-Fi Connection

Operation on the Camera-1

Password

SSID (network name)

Establishing a Wi-Fi Connection

5Select the SSID, then enter the

password.

On the computer’s network setting

screen, select the SSID checked in

step 4.

“_Canon0A” is displayed at the end

of the SSID.

For the password, enter the password

checked in step 4.

6Select [OK].

Select [OK] and press <0>. The

following message is displayed.

“******” represents the last six digits of

the MAC address of the camera to be

connected.

Operation on the Computer-1

Computer’s screen

(sample)

Operation on the Camera-2

Establishing a Wi-Fi Connection

7Start EOS Utility.

8In EOS Utility, click [Pairing over

Wi-Fi/LAN].

If a firewall-related message is

displayed, select [Yes].

9Click [Connect].

Select the camera to connect to, then

click [Connect].

Establish a Wi-Fi connection.

When the camera detects the

computer on which you clicked

[Connect] in step 9, the screen on

the left is displayed.

Select [OK] and press <0>. The

[DWi-Fi on] screen will appear.

Operation on the Computer-2

Operation on the Camera-3

Establishing a Wi-Fi Connection

[DWi-Fi on] Screen

Disconnect,exit

Terminates the Wi-Fi connection.

Confirm set.

You can check the settings.

Error details

When a Wi-Fi connection error occurs, you can check the details of

the error.

To switch to the menu, press the <M> button.

The Wi-Fi connection to a computer is now complete.

Operate the camera using EOS Utility on the computer. See page

80.

To reconnect via Wi-Fi, see “Reconnecting via Wi-Fi” (p.125).

For EOS Utility operation procedures, refer to the EOS Utility Instruction

Manual. In addition to remote shooting, various camera operations are

available.

For how to obtain the EOS Utility Instruction Manual, refer to the

Camera Instruction Manual.

Operating the Camera Using EOS Utility

When the Wi-Fi connection is terminated while recording a movie with

remote shooting, the camera responds as follows:

• When the power switch is set to <k>, movie shooting continues.

• When the power switch is set to <1>, movie shooting stops.

When the power switch is set to <1> and the movie shooting mode is

set using EOS Utility, you cannot shoot by operating the camera.

With a Wi-Fi connection to EOS Utility established, certain functions are

unavailable.

In remote shooting, the AF speed may become slower.

Depending on the communication status, image display or shutter

release may be delayed.

In Remote Live View shooting, the rate of image transmission is slower

compared to a connection via an interface cable. Therefore, moving

subjects cannot be displayed smoothly.

The Wi-Fi connection will be terminated if you set the camera’s power to

<2> or open the card slot/battery compartment cover.

Connecting to a

Printer via Wi-Fi

This section describes how to print images by directly

connecting the camera to a printer via Wi-Fi.

Set [Wi-Fi] to [Enable] on the [Wi-Fi settings] screen in

advance (p.12).

To establish a Wi-Fi connection, operations on the printer

are required. For details, refer to the printer's instruction

manual.

When in the <8: FG> or <v: ABCD> modes or

when Multi Shot Noise Reduction is set, the camera cannot be

connected to a printer via Wi-Fi.

Wi-Fi connection is possible with Wi-Fi printers supporting

PictBridge (Wireless LAN).

To connect via Wi-Fi using an access point, see “Advanced Wi-Fi

Connection” (p.107).

1Press the <k> button.

2Select [l] (Print from Wi-Fi

printer).

If the history (p.126) is displayed,

switch the screen with the <Y> <Z>

keys.

3Select [Register a device for

connection].

4Check the SSID and password.

Check the SSID (network name) and

password displayed on the camera’s

LCD monitor.

In [Wi-Fi settings], if you set

[Password] to [None], the password

will not be displayed or required. For

details, see page 161.

Establishing a Wi-Fi Connection

Password

SSID (network name)

Establishing a Wi-Fi Connection

5Operate the printer to connect it

to the camera via Wi-Fi.

On the Wi-Fi settings menu of the

printer to be used, select the SSID

you have checked.

“_Canon0A” is displayed at the end

of the SSID.

For the password, enter the password

checked in step 4.

6Select the printer to connect to

via Wi-Fi.

When a list of detected printers

appears, select the printer to connect

to via Wi-Fi, then press <0>.

Some printers may make a beeping

sound.

When 16 or more printers are

detected or the search takes over 3

minutes, you can select [Search

again].

When a Wi-Fi connection is

established, an image on the card will

appear.

7Select the images to be printed.

Select images on the camera for

printing (p.84).

Select and print images individually.

1Select an image to print.

Press the <Y> <Z> keys of the

cross keys to select an image to print,

then press <0>.

By pressing the button, you

can switch to the index display and

select an image.

2Select [Print image].

The print setting screen will appear.

3Print the image.

For the print setting procedures, see

page 87.

When [Print] is selected, printing

starts.

When printing is complete, the screen

for step 1 will reappear. To print

another image, repeat steps 1 to 3.

4Terminate the Wi-Fi connection.

Press the <k> button to display the

confirmation dialog. Select [OK], then

press <0> to terminate the Wi-Fi

connection.

Printing Images

Printing Images Individually

Printing Images

Print by specifying the printing options.

1Press <0>.

2Select [Print order].

The [Print order] screen will appear.

3Set the printing options.

For the setting procedures, refer to

“Digital Print Order Format (DPOF)”

in the Camera Instruction Manual.

If the print order is complete before

establishing a Wi-Fi connection,

proceed to step 4.

4Select [Print].

[Print] can be selected only when an

image is selected and printer is ready

to print.

5Set the [Paper settings] (p.87).

Set the printing effects (p.89) as

necessary.

Printing by Specifying the Options

Printing Images

6Select [OK].

When printing is complete, the screen

for step 3 will reappear.

7Terminate the Wi-Fi connection.

Press the <k> button to display the

confirmation dialog. Select [OK], then

press <0> to terminate the Wi-Fi

connection.

With a Wi-Fi connection to a printer established, a picture cannot be

taken even if the camera’s shutter button is pressed.

Movies cannot be printed.

Before printing, be sure to set the paper size.

Certain printers may not imprint the file number.

If [Bordered] is set, certain printers may imprint the date on the border.

Depending on the printer, the date may appear faint if it is imprinted on a

bright background or on the border.

RAW images cannot be printed by selecting [Print order]. When printing,

select [Print image] and print.

When you use a battery to power the camera, make sure it is fully

charged.

Depending on the image’s file size and image-recording quality, it may

take some time to start printing after you select [Print].



To stop printing, press <

> while [

Stop

] is displayed, then select [

When printing with [Print order], if you stopped printing and want to

resume printing of the remaining images, select [Resume]. Note that

printing will not resume if any of the following occurs.

• You changed the print order or deleted any of the print ordered images

before resuming printing.

• When index is set, you changed the paper setting before resuming

printing.

• The card’s remaining capacity was low when you paused printing.

If a problem occurs during printing, see page 92.

Specify settings for printing as necessary.

The screen display and setting options vary depending on the

printer. Some settings may not be available. For details, refer to the

printer’s instruction manual.

Select [Paper settings], then press

<0>.

The paper settings screen will

appear.

Print Settings

Paper Settings

Print setting screen

* Depending on the printer, certain settings such as the date and file

number imprinting and cropping may not be selectable.

Sets the printing effects (p.89).

Sets the date or file number imprinting to on or

off (p.90).

Sets the quantity to be printed (p.90).

Sets the print area (p.91).

Sets the paper size, type, and layout (p.88).

Returns to the image selection screen.

Starts the printing.

The paper size, type, and layout you have set are displayed.

Print Settings

Q Setting the Paper Size

Select the size of the paper loaded in

the printer, then press <0>.

The paper type screen will appear.

Y Setting the Paper Type

Select the type of the paper loaded in

the printer, then press <0>.

The page layout screen will appear.

U Setting the Page Layout

Select the page layout, then press

<0>.

The print setting screen will reappear.

Borderless Prints with no borders. If your printer cannot print borderless

prints, the print will have borders.

Bordered Prints with white borders along the edges.

xx-up Option to print 2, 4, 8, 9, 16, 20, or 35 images on one sheet.

Default The page layout varies depending on the printer model or its

settings.

If the image’s aspect ratio is different from the printing paper’s aspect ratio,

the image may be cropped significantly when you print it as a borderless

print. If the image is cropped, the print may look grainier due to the fewer

number of pixels.

Print Settings

Contents displayed on the screen

vary depending on the printer.

Select the option, then press <0>.

Select the desired printing effect, then

press <0>.

Setting the Printing Effects (Image Optimization)

Printing Effect Description

EDefault Printing differs depending on the printer. For details, refer to the

printer’s instruction manual.

EOn Prints with the printer’s standard colors. The image’s Exif

information is used to make automatic corrections.

EOff No automatic correction is applied.

ERed-Eye1 Effective in flash images where the subject has red eye. The

red eye is reduced for printing.

If you imprint shooting information on an image shot at an expanded ISO

speed (H), the correct ISO speed may not be imprinted.

Print Settings

Select [I], then press <0>.

Set the print settings as desired, then

press <0>.

Select [R], then press <0>.

Set the number of copies, then press

<0>.

Setting the Date/File Number Imprinting

Setting the Number of Copies

The [Default] setting for printing effects and other options are the printer’s

own default settings as set by the printer’s manufacturer. Refer to the

printer’s instruction manual to find out what the [Default] settings are.

Print Settings

You can crop the image and print only an

enlarged version of the cropped portion,

as if the image is recomposed.

Set the cropping right before printing.

If you change the print settings after

setting the cropping, you may have to set

the cropping again before printing.

1On the print setting screen, select [Cropping].

2Set the cropping frame size, position, and aspect ratio.

The image area within the cropping frame will be printed. The

cropping frame’s aspect ratio can be changed with [Paper

settings].

Changing the Cropping Frame Size

Press the or button to change the cropping frame

size. The smaller the cropping frame, the larger the image

magnification will be for printing.

Moving the Cropping Frame

Press the <W> <X> or <Y> <Z> keys to move the frame over

the image vertically or horizontally. Move the cropping frame until

it covers the desired image area.

Switching the Orientation of the Cropping Frame

Pressing the button will toggle the cropping frame

between the vertical and horizontal orientations. This enables

you to create a vertically oriented print from a horizontal image.

3Press <0> to exit the cropping.

The print setting screen will reappear.

You can check the cropped image area on the upper left of the

print setting screen.

Cropping the Image

Print Settings

Depending on the printer, the cropped image area may not be printed as

you specified.

The smaller you make the cropping frame, the grainier the picture will

look in the print.

Handling Printer Errors

If printing does not resume after you resolve a printer error (no ink, no paper,

etc.) and select [Continue], operate the buttons on the printer to resume

printing. For details on resuming printing, refer to the printer’s instruction

manual.

Error Messages

If a problem occurs during printing, an error message will appear on the

camera’s LCD monitor. Press <0> to stop printing. After fixing the

problem, resume printing. For details on how to fix a printing problem, refer

to the printer’s instruction manual.

Paper Error

Check whether the paper is properly loaded in the printer.

Ink Error

Check the printer’s ink level and the waste ink tank.

Hardware Error

Check for any printer problems other than paper and ink problems.

File Error

The selected image cannot be printed. Images taken with a different

camera or images edited with a computer may not be printable.

Sending Images to

a Web Service

This section describes how to use Web services to send

images.

Set [Wi-Fi] to [Enable] on the [Wi-Fi settings] screen in

advance (p.12).

To send images to Web services, you need to sign up as a CANON

iMAGE GATEWAY member (free of charge).

Once you are a CANON iMAGE GATEWAY member, you can publish

photos you took in online albums and use a range of services. This

website also serves as a platform for sharing images on registered Web

services. Connect to the Internet from a computer or other device,

access the Canon website (www.canon.com/cig) to check countries and

areas supporting the services, then register as a member by following

the instructions.

If you also intend to use Web services other than CANON iMAGE

GATEWAY, you must have an account with the services you intend to

use. For details, consult each individual Web service’s site.

Preparation for Web Services

Signing Up as a CANON iMAGE GATEWAY Member

CANON iMAGE GATEWAY Web services are not supported in certain

countries and areas. For information on supported countries and areas,

refer to the Canon website (www.canon.com/cig).

To use CANON iMAGE GATEWAY, you must be able to connect to the

Internet. (An account with an internet service provider is necessary,

browser software needs to be installed, and a line connection must be

completed.)

For information on web browser versions and settings required to access

CANON iMAGE GATEWAY, refer to the CANON iMAGE GATEWAY site.

Fees to connect to your provider and communication fees to access your

provider’s access point are charged separately.

If there has been a change in the service features of registered Web

services, operation may be different from the description in this manual,

or operation may not be possible.

For member registration, refer to Help on the CANON iMAGE GATEWAY

site.

For Web services that can be used with this camera’s Wi-Fi functions, refer

to the CANON iMAGE GATEWAY site.

Preparation for Web Services

Start EOS Utility on the computer, log in to CANON iMAGE GATEWAY,

then specify the camera’s settings to enable access to Web services.

For details, refer to the EOS Utility Instruction Manual. For how to

obtain the EOS Utility Instruction Manual, refer to the Camera

Instruction Manual.

The general procedure for sending images to a Web service is as

follows.

1Install EOS Utility on a computer.

If you have already installed it, proceed to step 2.

2Access Canon website from the computer and sign up

as a CANON iMAGE GATEWAY member (free of charge).

If you are already a member, proceed to step 3.

3Connect the camera and computer via Wi-Fi (p.75).

You can also configure the settings by connecting the camera and

computer with an interface cable (sold separately) instead of via

Wi-Fi.

4Start EOS Utility on the computer, log in to CANON

iMAGE GATEWAY in the Web service settings, then

enable the camera to use Web services.

For details, refer to the EOS Utility Instruction Manual.

Specifying Settings to Use Web Services

1Press the <k> button.

2Select the Web service you have

registered on page 95.

If the history (p.126) is displayed,

switch the screen with the <Y> <Z>

keys.

A screen to select a destination may

appear depending on the type and

settings of the Web service you

select. For details, see page 123.

3Connect to an access point via

Wi-Fi.

See the operations from page 107

and onward to connect the camera to

an access point via Wi-Fi.

Establishing a Wi-Fi Connection

You can share images with your family and friends by sending images

from the camera to a Web service registered on the camera or by

sending Web links of the online albums.

Select and send images individually.

1Select an image to send.

Press the <Y> <Z> keys of the

cross keys to select an image to

send, then press <0>.

By pressing the button, you

can switch to the index display and

select an image.

2Select [Send img shown].

To select a size at which to send the

image, select [Resize image] and

press <0>.

Select [Send img shown] and press

<0> to send the image displayed.

On the screen to complete the

process for sending the image, select

[OK] to terminate the Wi-Fi

connection and return to the screen

to select a Web service.

When the [Terms of use] screen is

displayed, thoroughly read the

message, then select [I Agree].

The screen can be scrolled up and

down by pressing the <W> <X>

keys.

Sending Images to a Web Service

Sending Images Individually

Sending Images to a Web Service

Select multiple images to send them at once.

1Press <0>.

2Select [Send selected].

3Select the images to send.

Press the <Y> <Z> keys of the

cross keys to select an image to

send, then press <0>.

A checkmark [X] will be displayed on

the upper left of the screen.

By pressing the button, you

can select images from a three-image

display. To return to the single-image

display, press the button.

To select another image to send,

repeat step 3.

After selecting the images to send,

press the <g> button.

Sending Multiple Selected Images

Sending Images to a Web Service

4Select [Resize image].

Set it as necessary.

When YouTube is selected as the

destination, [Resize image] is not

displayed.

On the displayed screen, select an

image size, then press <0>.

5Select [Send].

The images will be sent.

On the screen to complete the

process for sending the image, select

[OK] to terminate the Wi-Fi

connection and return to the screen

to select a Web service.

When the [Terms of use] screen is

displayed, thoroughly read the

message, then select [I Agree].

The screen can be scrolled up and

down by pressing the <W> <X>

keys.

Sending Images to a Web Service

100

Specify the range of images to send all the images in the range at once.

1Press <0>.

2Select [Send range].

3Specify the range of images.

Select the first image (start point),

then press <0>.

Select the last image (end point),

then press <0>.

Images will be selected and [X] will

appear.

To cancel the selection, repeat this

step.

You can press the button or

button to change the number

of images shown in the index display.

4Confirm the range.

Press the <g> button.

To return to the previous screen,

press the <M> button.

Sending a Specified Range of Images

101

Sending Images to a Web Service

5Select [Resize image].

Set it as necessary.

On the displayed screen, select an

image size, then press <0>.

6Select [Send].

The images will be sent.

On the screen to complete the

process for sending the image, select

[OK] to terminate the Wi-Fi

connection and return to the screen

to select a Web service.

When the [Terms of use] screen is

displayed, thoroughly read the

message, then select [I Agree].

The screen can be scrolled up and

down by pressing the <W> <X>

keys.

Sending Images to a Web Service

102

Send all the images on the card at once.

1Press <0>.

2Select [Send all card].

3Select [Resize image].

Set it as necessary.

On the displayed screen, select an

image size, then press <0>.

Sending All Images on the Card

103

Sending Images to a Web Service

4Select [Send].

The images will be sent.

On the screen to complete the

process for sending the image, select

[OK] to terminate the Wi-Fi

connection and return to the screen

to select a Web service.

When the [Terms of use] screen is

displayed, thoroughly read the

message, then select [I Agree].

The screen can be scrolled up and

down by pressing the <W> <X>

keys.

Sending Images to a Web Service

104

Send all the images that match the search conditions set in [Set image

search conditions] at once.

For [Set image search conditions], refer to “Filtering Images for

Playback” in the Camera Instruction Manual.

1Press <0>.

2Select [Send all found].

3Select [Resize image].

Set it as necessary.

On the displayed screen, select an

image size, then press <0>.

Sending Images that Match the Search Conditions

105

Sending Images to a Web Service

4Select [Send].

The images will be sent.

On the screen to complete the

process for sending the image, select

[OK] to terminate the Wi-Fi

connection and return to the screen

to select a Web service.

When the [Terms of use] screen is

displayed, thoroughly read the

message, then select [I Agree].

The screen can be scrolled up and

down by pressing the <W> <X>

keys.

Sending Images to a Web Service

106

With a Wi-Fi connection to a Web service established, a picture cannot

be taken even if the camera’s shutter button is pressed.

RAW images cannot be sent.

When sending an image to a Web service other than CANON iMAGE

GATEWAY, a send error message may not be displayed even if the

image has not been sent to the Web service successfully. Such errors

can be checked on the CANON iMAGE GATEWAY site; check the error

content, then try sending the image again.

Depending on the Web service, the type or number of images that can

be sent and the length of movies will be limited.

Some images may not be able to be sent with [Send range], [Send all

card], or [Send all found].

When you reduce the image size, all images to be sent at the same time

are resized. Note that movies and b size still photos are not reduced.

[Resize:S2] is enabled only for still photos shot with cameras of the

same model as this camera. Still photos shot with other models are sent

without resizing.

When accessing CANON iMAGE GATEWAY from a computer or other

device, you can check the send history for the Web services that the

images were sent to.

To terminate the Wi-Fi connection without sending an image, press the

<M> button on the screen for step 1.

When you use a battery to power the camera, make sure it is fully

charged.

107

Advanced Wi-Fi

Connection

This section mainly describes how to connect via Wi-Fi

using an access point.

Set [Wi-Fi] to [Enable] on the [Wi-Fi settings] screen in

advance (p.12).

When connecting the camera to a smartphone via Wi-Fi,

make sure to install Camera Connect to the smartphone

before specifying connection settings (p.17).

For information on [z] (sending and receiving images

between cameras), see "Connecting to Another Camera via

Wi-Fi" (p.59).

To connect to Connect Station via Wi-Fi, see "Connecting to

Connect Station via Wi-Fi" (p.71).

108

When you connect to an access point, you can use the following Wi-Fi

functions.

* These instructions should only be followed after each device, such as a

smartphone, is connected to an access point.

Wi-Fi Function Operation Flowchart

(Advanced Wi-Fi Connection)

Communicate

with smartphone

Remote control

(EOS Utility)

Print from

Wi-Fi printer

Send images to

Web service

Set the camera’s Wi-Fi settings (p.12)

Install Camera

Connect on a

smartphone

(p.17)

Install EOS

Utility on a

computer

• Register with

CANON iMAGE

GATEWAY

(p.94)

• Register Web

services on the

camera (p.95)

Connect each device to an access point*

Connect the camera to an access point (p.109)

Connect the camera to each device

(p.34)(p.75)(p.81)

View images

and shoot

remotely

(p.39, 42)

Operate the

camera

remotely (p.80)

Print images

(p.84)

Save and share

images (p.97)

Set upConnectUse

109

To start with, check if the access point supports WPS* that allows easy

Wi-Fi connection between Wi-Fi devices.

If you do not know if the access point you use is WPS-compatible, refer

to the access point instruction manual or other documentation.

* Wi-Fi Protected Setup

When WPS is supported

The following two Wi-Fi connection methods are available.

Connection can be established easier with WPS (PBC mode).

• Establishing a Wi-Fi connection with WPS (PBC mode): Perform

the operations described on page 110 and onward.

• Establishing a Wi-Fi connection with WPS (PIN mode): Perform

the operations described on page 114 and onward.

When WPS is not supported

• Connecting to a detected network manually via Wi-Fi: Perform the

operations described on page 118 and onward.

Access Point Encryption

This camera supports the following options for [Authentication] and

[Encryption settings]. Therefore, when connecting to a detected

network manually via Wi-Fi, the encryption used by the access point

must be one of the following.

[Authentication]: Open system, Shared key, or WPA/WPA2-PSK

[Encryption settings]: WEP, TKIP, or AES

Checking the Type of Access Point

If stealth functions of the access point are active, Wi-Fi connection

may be disabled. Deactivate stealth functions.

When connecting to a network that has a network administrator, ask the

administrator about the detailed setting procedures.

If the network you use filters by MAC address, register the MAC address of

the camera at the access point. The MAC address can be checked on the

[View info] screen (p.137).

110

This is a Wi-Fi connection mode available when using an access point

compatible with WPS. In pushbutton connection mode (PBC mode), the

camera and the access point can be connected via Wi-Fi simply by

pressing the WPS button on the access point.

If multiple access points are active in the surrounding area, it may be

more difficult to establish a Wi-Fi connection. In such a case, try

using [WPS (PIN mode)] to establish a Wi-Fi connection.

Check the position of the WPS button on the access point in

advance.

It may take approx. one minute to establish a Wi-Fi connection.

1Press the <k> button.

2Select an item.

If the history (p.126) is displayed,

switch the screen with the <Y> <Z>

keys.

When the screen switches, press the

<W> <X> or <Y> <Z> keys to

select an item, then press <0>.

Depending on the selected Web

service, the [Send to] screen is

displayed. Select a destination

(p.123).

Establishing a Wi-Fi Connection with

WPS (PBC Mode)

111

Establishing a Wi-Fi Connection with WPS (PBC Mode)

3Select [Register a device for

connection].

Not displayed when a Web service is

selected in step 2. Proceed to step 5.

When [q] (Connect to smartphone) is

selected, the screen on the left is

displayed. If Camera Connect is

already installed, select [Do not

display] and press <0>.

4Select [Switch network].

Displayed when [q], [D], or [l] is

selected in step 2.

5Select [Connect with WPS].

For [Camera access point mode] displayed in step 5, see page 123.

Establishing a Wi-Fi Connection with WPS (PBC Mode)

112

6Select [WPS (PBC mode)].

Select [OK] and press <0> to go

to the next screen.

7Connect to the access point via

Wi-Fi.

Press the access point’s WPS button.

For details about where the button is

located and how long to press it, refer

to the access point’s instruction

manual.

Select [OK] and press <0> to

establish a Wi-Fi connection with the

access point.

When a Wi-Fi connection with the

access point is established, the next

screen is displayed.

8Select [Auto setting].

Select [OK] and press <0> to

display the setting screen (p.113) for

the Wi-Fi function selected in step 2.

If [Auto setting] results in an error or

if you want to specify the settings

manually, see page 163.

The IP address can only be set automatically in environments using DHCP

servers, or access points or routers with DHCP server functionality, such

that the IP addresses, etc. are required to be assigned automatically.

113

Establishing a Wi-Fi Connection with WPS (PBC Mode)

This section describes how to set the screens for the Wi-Fi function.

Read the page that introduces the selected Wi-Fi function.

qCommunicating with a

Smartphone

Proceed to step 7 on page 36.

DOperating Remotely Using

EOS Utility

Proceed to step 6 on page 77.

Printing Images Using a Wi-Fi

Printer

Proceed to step 6 on page 83.

mSending Images to a Web Service

The settings for connecting to a Web

service via Wi-Fi are now complete.

Proceed to "Sending Images to a

Web Service" on page 97.

Specifying Settings for the Wi-Fi Function

114

This is a Wi-Fi connection mode available when using an access point

compatible with WPS. In PIN code connection mode (PIN mode), an

8-digit identification number specified on the camera is set at the

access point to establish a Wi-Fi connection.

Even if there are multiple access points active in the surrounding

area, a relatively reliable Wi-Fi connection can be established using

this shared identification number.

It may take approx. one minute to establish a Wi-Fi connection.

1Press the <k> button.

2Select an item.

If the history (p.126) is displayed,

switch the screen with the <Y> <Z>

keys.

When the screen switches, press the

<W> <X> or <Y> <Z> keys to

select an item, then press <0>.

Depending on the selected Web

service, the [Send to] screen is

displayed. Select a destination

(p.123).

Establishing a Wi-Fi Connection with

WPS (PIN Mode)

115

Establishing a Wi-Fi Connection with WPS (PIN Mode)

3Select [Register a device for

connection].

Not displayed when a Web service is

selected in step 2. Proceed to step 5.

When [q] (Connect to smartphone) is

selected, the screen on the left is

displayed. If Camera Connect is

already installed, select [Do not

display] and press <0>.

4Select [Switch network].

Displayed when [q], [D], or [l] is

selected in step 2.

5Select [Connect with WPS].

6Select [WPS (PIN mode)].

Select [OK] and press <0> to go

to the next screen.

For [Camera access point mode] displayed in step 5, see page 123.

Establishing a Wi-Fi Connection with WPS (PIN Mode)

116

7Specify the PIN code at the

access point.

At the access point, specify the 8-digit

PIN code displayed on the camera’s

LCD monitor.

For instructions on setting PIN codes

at the access point, refer to the

access point’s instruction manual.

After the PIN code is specified, select

[OK] and press <0>.

8Connect to the access point.

Select [OK] and press <0> to

establish a Wi-Fi connection with the

access point.

When a Wi-Fi connection with the

access point is established, the next

screen is displayed.

9Select [Auto setting].

Select [OK] and press <0> to

display the setting screen (p.117) for

the Wi-Fi function selected in step 2.

If [Auto setting] results in an error or

if you want to specify the settings

manually, see page 163.

The IP address can only be set automatically in environments using DHCP

servers, or access points or routers with DHCP server functionality, such

that the IP addresses, etc. are required to be assigned automatically.

117

Establishing a Wi-Fi Connection with WPS (PIN Mode)

This section describes how to set the screens for the Wi-Fi function.

Read the page that introduces the selected Wi-Fi function.

qCommunicating with a

Smartphone

Proceed to step 7 on page 36.

DOperating Remotely Using

EOS Utility

Proceed to step 6 on page 77.

Printing Images Using a Wi-Fi

Printer

Proceed to step 6 on page 83.

mSending Images to a Web Service

The settings for connecting to a Web

service via Wi-Fi are now complete.

Proceed to "Sending Images to a

Web Service" on page 97.

Specifying Settings for the Wi-Fi Function

118

Establish a Wi-Fi connection by selecting the SSID (or ESS-ID) of the

access point for a Wi-Fi connection from a list of active access points

nearby.

1Press the <k> button.

2Select an item.

If the history (p.126) is displayed,

switch the screen with the <Y> <Z>

keys.

When the screen switches, press the

<W> <X> or <Y> <Z> keys to

select an item, then press <0>.

Depending on the selected Web

service, the [Send to] screen is

displayed. Select a destination

(p.123).

3Select [Register a device for

connection].

Not displayed when a Web service is

selected in step 2. Proceed to step 5.

Connecting to a Detected Network

Manually via Wi-Fi

Selecting the Access Point

119

Connecting to a Detected Network Manually via Wi-Fi

4Select [Switch network].

Displayed when [q], [D], or [l] is

selected in step 2.

5Select an access point.

Press the <W> <X> keys to select

the access point to connect to via

Wi-Fi from the list of access points.

(1) SSID

(2) An icon is displayed if the access point is encrypted

(3) Channel used

[Refresh] and [Manual settings]

Scroll down the screen in step 5 to display [Refresh] and [Manual

settings].

To search for access points again, select [Refresh].

To specify the settings for the access point manually, select [Manual

settings]. Enter the SSID using the virtual keyboard and then

specify the settings following the instructions displayed.

(1) (2) (3)

For [Camera access point mode] displayed in step 5, see page 123.

Connecting to a Detected Network Manually via Wi-Fi

120

Enter the password specified for the access point. For details on the

specified password, refer to the access point’s instruction manual.

The screens displayed in steps 6 to 7 below vary depending on the

authentication and encryption specified for the access point.

Go to step 8 when the [IP address set.] screen is displayed instead

of the screens for steps 6 to 7.

6Select a key index.

The [Key index] screen is displayed

only if WEP encryption is used by the

access point.

Select the key index number

specified for the access point, then

press <0>.

Select [OK] and press <0> to go

to the next screen.

7Enter the password.

Enter the password using the virtual

keyboard (p.162), then press the

<M> button.

The [IP address set.] screen (p.121)

will be displayed.

Entering the Access Point Password

121

Connecting to a Detected Network Manually via Wi-Fi

8Select [Auto setting].

Select [OK] and press <0> to

display the setting screen (p.122) for

the Wi-Fi function selected in step 2.

If [Auto setting] results in an error or

if you want to specify the settings

manually, see page 163.

Setting the IP Address

The IP address can only be set automatically in environments using DHCP

servers, or access points or routers with DHCP server functionality, such

that the IP addresses, etc. are required to be assigned automatically.

Connecting to a Detected Network Manually via Wi-Fi

122

This section describes how to set the screens for the Wi-Fi function.

Read the page that introduces the selected Wi-Fi function.

qCommunicating with a

Smartphone

Proceed to step 7 on page 36.

DOperating Remotely Using

EOS Utility

Proceed to step 6 on page 77.

Printing Images Using a Wi-Fi

Printer

Proceed to step 6 on page 83.

mSending Images to a Web Service

The settings for connecting to a Web

service via Wi-Fi are now complete.

Proceed to "Sending Images to a

Web Service" on page 97.

Specifying Settings for the Wi-Fi Function

123

Connecting to a Detected Network Manually via Wi-Fi

A screen to select a destination may be displayed depending on the

Web service you select in [Wi-Fi function].

To register destinations or to specify the settings, you must use a

computer. For more information, refer to the EOS Utility Instruction

Manual.

When [m] (Email) or other service is

selected on the [Upload to Web

service] screen, the [Send to] screen

may be displayed.

Select the destination from the list of

registered destinations and press

<0>.

The procedures for setting up a

connection and sending images are

the same as those for other Web

services.

Camera access point mode is a

connection mode for connecting the

camera directly to each device via Wi-Fi.

Displayed when [q], [D], or [l] is

selected in [Wi-Fi function].

Send To Screen

Camera Access Point Mode

124

125

Reconnecting via Wi-Fi

This section describes how to reconnect the camera to

a device for which you have already established a Wi-Fi

connection and how to register multiple connection

settings.

126

Reconnect the camera via Wi-Fi to a device or service that you have

connected to and registered connection settings for in the past.

1Press the <k> button.

2Select an item.

Select the item to connect to via Wi-Fi

from the displayed history. If the item

is not displayed, press the <Y> <Z>

keys to switch the screen.

If [Connection history] is set to

[Hide], the history will not be

displayed (p.161).

After selecting the item, press

<0>.

3Operate the connected device.

q Smartphone

Activate the smartphone’s Wi-Fi function, then start Camera

Connect.

If the smartphone’s connection destination has been changed,

restore the setting to connect via Wi-Fi to the camera or the

same access point as the camera.

When directly connecting the camera to a smartphone via

Wi-Fi, "_Canon0A" is displayed at the end of the SSID.

z Connecting to Another Camera via Wi-Fi

Perform the reconnection procedure on the target camera as

well.

By default, settings are named after the nickname of the target

camera.

Reconnecting via Wi-Fi

127

Reconnecting via Wi-Fi

D EOS Utility

Start EOS Utility on the computer.

If the computer’s connection destination has been changed,

restore the setting to connect via Wi-Fi to the camera or the

same access point as the camera.

When directly connecting the camera to a computer via Wi-Fi,

"_Canon0A" is displayed at the end of the SSID.

l Printer

If the printer’s connection destination has been changed,

restore the setting to connect via Wi-Fi to the camera or the

same access point as the camera.

When directly connecting the camera to a printer via Wi-Fi,

"_Canon0A" is displayed at the end of the SSID.

Web Service

The reconnection procedure is complete.

When reconnecting by selecting [z], if Wi-Fi settings is cleared or deleted

on the target camera, reconnection will no longer be possible. In such a

case, delete the connection settings for the target camera in [Erase

connection information] (p.135) and establish the Wi-Fi connection

between the cameras again (p.59).

For the connection history, up to three items appear in the order of

registration. When a connection setting is added, the oldest item will be

deleted from the history.

128

With a Bluetooth connection established between the camera and a

smartphone, follow the steps below to reconnect to the smartphone via

Wi-Fi.

1Start Camera Connect.

Tap on the Camera Connect icon on

the smartphone to start the

application.

2Select a Camera Connect

function.

Select the Camera Connect function

you want to use.

A Wi-Fi connection will be

automatically established.

When a Wi-Fi connection is

established, the screen for the

selected function will appear.

For the Camera Connect functions,

see page 39.

Connecting to a Bluetooth-connected

Smartphone via Wi-Fi

Android

129

Connecting to a Bluetooth-connected Smartphone via Wi-Fi

1Start Camera Connect.

2Select a Camera Connect

function.

3Check the SSID.

Check the camera’s SSID (network

name) displayed on the smartphone.

4Operate the smartphone to

establish a Wi-Fi connection.

On the smartphone’s Wi-Fi function

screen, select the SSID checked in

step 3.

“_Canon0A” is displayed at the end

of the SSID.

Display the Camera Connect screen.

When a Wi-Fi connection is

established, the screen for the

selected function will appear.

iOS

Smartphone’s screen

(sample)

130

If you have established a Wi-Fi connection by operating either the

camera or a smartphone after pairing the devices, the smartphone can

connect to the camera via Wi-Fi even when the camera is turned off to

transfer images to the smartphone, etc.

1Configure [Stay conn. if off].

Select [Bluetooth function] on the

[Wireless communication settings]

screen.

2Select [Enable] for [Stay conn. if

off].

Select [Enable] for [Stay conn. if off]

on the [Bluetooth function] screen.

The Bluetooth connection with the

smartphone continues even when the

camera is turned off.

1Start Camera Connect.

Start Camera Connect on a

smartphone that is connected to the

camera via Bluetooth.

Connecting to a Camera That Is Turned

Off via Wi-Fi

Configuring [Stay conn. if off]

Connecting to a Camera That Is Turned Off via Wi-Fi

131

Connecting to a Camera That Is Turned Off via Wi-Fi

2Select [Images on camera].

Touch [Images on camera] from the

menu in Camera Connect.

A Wi-Fi connection starts.

A list of the images in the camera is

displayed when the Wi-Fi connection

is established.

You can operate Camera Connect to transfer images to a

smartphone and delete and rate images in the camera.

Touch [ ] on the Camera Connect screen to terminate the Wi-Fi

connection (p.41).

Operating Camera Connect

This function can only be used when the camera and a smartphone

are connected via Bluetooth.

This function can no longer be used if the wireless communication

settings are initialized or the connection information is erased from the

smartphone.

For information on establishing a Wi-Fi connection by operating either

the camera or a smartphone after pairing the devices, see "Establishing

a Bluetooth Connection" (p.19) or "Sending Images to a Smartphone

from the Camera" (p.42).

If the camera and smartphone are connected via Bluetooth, an

illustration indicating that a Bluetooth connection has been established is

displayed in the main window of Camera Connect (p.33).

132

You can register up to 20 connection settings for the Wi-Fi function.

1Press the <k> button.

2Select an item.

When the screen on the left appears,

press the <Y> <Z> keys to switch

the screen.

Select the item to newly connect to

via Wi-Fi from the screen on the left,

then press <0>.

For [z] (Transfer imgs between

cameras), see “Connecting to

Another Camera via Wi-Fi” (p.59).

For [q] (Connect to smartphone),

see “Connecting to a Smartphone via

Wi-Fi with the <k> Button” (p.34).

For [D] (Remote control

(EOS Utility)), see “Connecting to

EOS Utility via Wi-Fi” (p.75).

For [l] (Print from Wi-Fi printer),

see “Connecting to a Printer via

Wi-Fi” (p.81).

When sending images to a Web

service, see “Specifying Settings to

Use Web Services” (p.95).

Registering Multiple Connection Settings

To delete connection settings, see page 134.

133

Checking and Operating

Connection Settings

This section describes how to change or delete the

connection settings, clear the wireless communication

function settings, etc.

134

Change or delete connection settings saved on the camera. To change

or delete the connection settings, terminate the Wi-Fi connection first.

1Press the <k> button.

2Select an item.

When the screen on the left appears,

press the <Y> <Z> keys to switch

the screen.

From the screen on the left, select the

item for which to change or delete the

connection settings, then press

<0>.

3Select [Edit device information].

4Select a device.

Select the device for which to change

or delete the connection settings.

Changing or Deleting Connection Settings

135

Changing or Deleting Connection Settings

5Check or change the connection

settings.

Select an item and press <0>,

then change or delete the connection

settings on the displayed screen.

Change device nickname (p.160)

You can change the nickname using the virtual keyboard (p.162).

Viewable imgs (p.56)

Displayed when [q] (Connect to smartphone) is selected. Settings

will appear at the bottom of the screen.

Erase connection information

You can delete connection settings saved on the camera.

For Web services, use EOS Utility to delete the connection settings.

For details, refer to the EOS Utility Instruction Manual.

136

All wireless communication settings can be deleted. By deleting the

wireless communication settings, you can prevent them from being

exposed when you lend or give your camera to other people.

1Select [Wireless communication

settings].

Under the [51] tab, select [Wireless

communication settings], then

press <0>.

2Select [Clear settings].

Select [Clear settings], then press

<0>.

3Select [OK].

Wireless communication settings are

cleared and the [Wireless

communication settings] screen will

reappear.

Clearing Wireless Communication Settings

to Default

Performing [Clear all camera settings] under [54: Clear settings] does

not delete the wireless communication information.

137

On the [View info] screen, you can check the error content and the

MAC address of the camera.

1Press the <k> button.

2Select an item, then press the

button.

The [View info] screen will appear.

When an error has occurred, press <0> to display the error

content.

You can check the MAC address of the camera on this screen.

View Info Screen

138

139

Troubleshooting Guide

140

When an error occurs, display the details of the error by following one of

the procedures below. Then, eliminate the cause of the error by

referring to the examples shown in this chapter.

On the [View info] screen, press <0> (p.137).

Select [Error details] on the [Wi-Fi on] screen, then press <0>.

Click the error code number’s page in the following chart to jump to the

corresponding page.

Responding to Error Messages

11 (p.141)12 (p.141)

21 (p.142)22 (p.143)23 (p.144)

61 (p.145)63 (p.146)64 (p.146)65 (p.147)66 (p.147)

67 (p.147)68 (p.148)69 (p.148)

91 (p.148)

101 (p.148)102 (p.149)103 (p.149)104 (p.149)105 (p.150)

106 (p.150)107 (p.150)108 (p.150)109 (p.150)

121 (p.150)122 (p.151)123 (p.151)124 (p.151)125 (p.151)

126 (p.151)127 (p.152)

141 (p.152)142 (p.152)

When an error occurs, [Err**] is displayed on the upper right of the [Wi-Fi

function] screen. It disappears when the camera’s power is set to <2>.

141

Responding to Error Messages

In the case of [q], is Camera Connect running?

Establish a connection using Camera Connect (p.36).

In the case of [l], is the power of the printer on?

Turn on the printer.

In the case of [D], is EOS Utility running?

Start EOS Utility and re-establish the connection (p.78).

Are the camera and the access point set to use the same

password for authentication?

This error occurs if the passwords do not match when the

authentication method for encryption is set to [Open system].

The setting is case-sensitive, so check upper- and lower-case

characters. Make sure that the correct password for authentication

is set on the camera (p.120).

Is the power of the target device and access point on?

Turn on the target device and access point, then wait a while. If a

connection still cannot be established, perform the procedures to

establish the connection again.

11: Connection target not found

12: Connection target not found

Responding to Error Messages

142

What to check on the camera

On the camera, IP address is set to [Auto setting]. Is this the

correct setting?

If no DHCP server is used, specify the settings after setting the IP

address to [Manual setting] on the camera (p.163).

What to check on the DHCP server

Is the power of the DHCP server on?

Turn on the DHCP server.

Are there enough addresses for assignment by the DHCP

server?

Increase the number of addresses assigned by the DHCP server.

Remove devices assigned addresses by the DHCP server from

the network to reduce the number of addresses in use.

Is the DHCP server working correctly?

Check the DHCP server settings to make sure it is working

correctly as a DHCP server.

If applicable, ask your network administrator to ensure the DHCP

server is available.

21: No address assigned by DHCP server

143

Responding to Error Messages

What to check on the camera

On the camera, does the DNS server’s IP address setting

match the server’s actual address?

Set the IP address to [Manual setting]. Then, on the camera, set

the IP address that matches the address of the DNS server used

(p.158, 163).

What to check on the DNS server

Is the power of the DNS server on?

Turn on the DNS server.

Are the DNS server settings for IP addresses and the

corresponding names correct?

On the DNS server, make sure IP addresses and the

corresponding names are entered correctly.

Is the DNS server working correctly?

Check the DNS server settings to make sure the server is working

correctly as a DNS server.

If applicable, ask your network administrator to ensure the DNS

server is available.

What to check on the network as a whole

Does the network that you are trying to connect to via Wi-Fi

include a router or similar device that serves as a gateway?

If applicable, ask your network administrator for the network

gateway address and enter it on the camera (p.158, 163).

Make sure that the gateway address setting is correctly entered on

all network devices including the camera.

22: No response from DNS server

Responding to Error Messages

144

What to check on the camera

Do the camera and another device connected via Wi-Fi to the

same network have the same IP address?

Change the camera’s IP address to avoid using the same address

as another device on the network. Otherwise, change the IP

address of the device that has a duplicate address.

If the camera’s IP address is set to [Manual setting] in network

environments using a DHCP server, change the setting to [Auto

setting] (p.121).

23: Device with same IP address exists on selected

network

Responding to Error Messages 21 - 23

Also check the following points when responding to errors numbered

21 - 23.

Are the camera and the access point set to use the same password for

authentication?

This error occurs if the passwords do not match when the authentication

method for encryption is set to [Open system]. The setting is

case-sensitive, so check upper- and lower-case characters. Make sure

that the correct password for authentication is set on the camera

(p.120).

145

Responding to Error Messages

Are any obstacles blocking the line of sight between the

camera and the antenna of the access point?

Move the antenna of the access point to a position clearly visible

from the point of view of the camera (p.155).

What to check on the camera

Does the SSID set on the camera match that of the access

point?

Check the SSID at the access point, then set the same SSID on

the camera (p.119).

What to check at the access point

Is the access point turned on?

Turn on the power of the access point.

If filtering by MAC address is active, is the MAC address of the

camera used registered at the access point?

Register the MAC address of the camera used to the access point.

The MAC address can be checked on the [View info] screen

(p.137).

61: Selected SSID wireless LAN network not found

Responding to Error Messages

146

Are the camera and the access point set to use the same

authentication method?

The camera supports the following authentication methods: [Open

system], [Shared key], and [WPA/WPA2-PSK] (p.109).

Are the camera and the access point set to use the same

password for authentication?

The setting is case-sensitive, so check upper- and lower-case

characters. Make sure that the correct password for authentication

is set on the camera (p.120).

If filtering by MAC address is active, is the MAC address of the

camera used registered at the access point?

Register the MAC address of the camera used to the access point.

The MAC address can be checked on the [View info] screen

(p.137).

Are the camera and the access point set to use the same

encryption method?

The camera supports the following encryption methods: WEP,

TKIP, and AES (p.109).

If filtering by MAC address is active, is the MAC address of the

camera used registered at the access point?

Register the MAC address of the camera used to the access point.

The MAC address can be checked on the [View info] screen

(p.137).

63: Wireless LAN authentication failed

64: Cannot connect to wireless LAN terminal

147

Responding to Error Messages

Are any obstacles blocking the line of sight between the

camera and the antenna of the access point?

Move the antenna of the access point to a position clearly visible

from the point of view of the camera (p.155).

The Wi-Fi connection was lost for some reason, and the

connection cannot be restored.

The following are possible reasons: excessive access to the

access point from another device, a microwave oven or similar

appliance in use nearby (interfering with IEEE 802.11b/g/n

(2.4 GHz band)), or influence of rain or high humidity (p.155).

Are the camera and the access point set to use the same

password for authentication?

The setting is case-sensitive, so check upper- and lower-case

characters. Make sure that the correct password for authentication

is set on the camera (p.120).

Are the camera and the access point set to use the same

encryption method?

The camera supports the following encryption methods: WEP,

TKIP, and AES (p.109).

If filtering by MAC address is active, is the MAC address of the

camera used registered at the access point?

Register the MAC address of the camera used to the access point.

The MAC address can be checked on the [View info] screen

(p.137).

65: Wireless LAN connection lost

66: Incorrect wireless LAN password

67: Incorrect wireless LAN encryption method

Responding to Error Messages

148

Did you hold down the access point’s WPS (Wi-Fi Protected

Setup) button for the specified period of time?

Hold down the WPS button for the period of time specified in the

access point’s instruction manual.



Are you trying to establish a connection near the access point?

Try establishing the connection when both devices are within reach

of each other.



Connection is in progress by other access points in Pushbutton

Connection mode (PBC mode) of WPS (Wi-Fi Protected Setup).

Wait a while before trying to establish the connection, or try to

establish a connection in PIN code connection mode (PIN mode)

(p.114).

A problem other than error code number 11 to 69 occurred.

Turn the camera’s power switch off and on.

Has the procedure to establish a Wi-Fi connection between

cameras been performed on the other camera as well?

Perform the procedure to establish a Wi-Fi connection between

cameras on the other camera as well.

Even with cameras whose connection settings have been

registered with each other, perform the reconnection procedure on

both cameras when reconnecting them after terminating the first

Wi-Fi connection.

Is Wi-Fi connection being attempted by multiple cameras?

The camera can be connected to only one camera at a time via

Wi-Fi. Confirm that no other camera is attempting to establish a

connection nearby and retry connection.

68: Cannot connect to wireless LAN terminal. Retry from

the beginning.

69: Multiple wireless LAN terminals have been found.

Cannot connect. Retry from the beginning.

91: Other error

101: Could not establish connection

149

Responding to Error Messages

Does the card in the camera to receive data have sufficient

space?

Check the card in the camera to receive data. Replace the card or

make sufficient space available, then try sending the data again.

Is the card in the camera to receive data locked?

Check the card in the camera to receive data. Release the lock,

then try sending the data again.

Check if the folder number of the camera to receive data is

999 and the file number 9999.

Folder or file names cannot be created automatically. Replace the

card in the camera to receive data, then try sending the data again.

Is the card working properly?

Replace the card in the camera to receive data, then try sending

the data again.

Is the camera to receive data compatible with playback of

MP4-format movies?

When the camera to receive data is not compatible with playback

of MP4-format movies, they cannot be sent to the camera.

Is the camera to receive data ready to receive data?

Check the battery and communication status of the camera to

receive data, then try sending the data again.

Does the card in the camera to receive data have sufficient

space?

Check the card in the camera to receive data. Replace the card or

make sufficient space available, then try sending the data again.

102: Could not send files

103: Could not receive files

104: Could not receive files. Card full

Responding to Error Messages

150

Is the card in the camera to receive data locked?

Check the card in the camera to receive data. Release the lock,

then try sending the data again.

Check if the folder number of the camera to receive data is

999 and the file number 9999.

Folder or file names cannot be created automatically. Replace the

card in the camera to receive data, then try sending the data again.

Is the card working properly?

Replace the card in the camera to receive data, then try sending

the data again.

Has the target camera terminated the connection?

Check the communication status and re-establish the Wi-Fi

connection between the cameras.

A problem other than error code number 101 to 108 occurred

while the cameras are connected to each other.

Re-establish the Wi-Fi connection between the cameras.

The target Web server does not have enough free space.

Delete unnecessary images on the Web server, check the free

space on the Web server, then try sending the data again.

105: Could not receive files. Card’s write protect switch is

set to lock

106: Could not receive files. Folder and file number have

reached maximum value

107: Could not receive files. Card cannot be accessed

108: Disconnected

109: An error has occurred

121: Not enough free space on server

151

Responding to Error Messages

Web service setting operation may have failed.

Connect the camera and computer via Wi-Fi or with an interface

cable (sold separately) and reconfigure Web service settings using

EOS Utility (p.95).



Is the camera’s registration information or Web service

registered on the camera deleted on CANON iMAGE GATEWAY?

Connect the camera and computer via Wi-Fi or with an interface

cable (sold separately) and reconfigure Web service settings using

EOS Utility (p.95).

The root certificate has expired or is invalid.

Connect the camera and computer via Wi-Fi or with an interface

cable (sold separately) and reconfigure Web service settings using

EOS Utility (p.95).

This error may be displayed if the camera’s time setting is

significantly off from the actual time. Check if the correct time is set

on the camera.

Is the network connected?

Check the connection status of the network.

CANON iMAGE GATEWAY is under maintenance or load is

concentrated temporarily.

Try connecting to the Web service again later.

122: Connect to a computer, and correct the settings for

the Web service with EOS software.

123: Cannot log in to Web service. Connect to a computer

and correct the settings with EOS software.

124: Invalid SSL certificate. Connect to a computer and

correct the settings with EOS software.

125: Check the network settings

126: Could not connect to server

Responding to Error Messages

152

A problem other than error code number 121 to 126 occurred

during the connection to the Web service.

Try re-establishing the Wi-Fi connection to the Web service.

Is the printer performing a printing process?

Try again to establish the Wi-Fi connection to the printer after the

printing process is finished.

Is another camera connected to the printer via Wi-Fi?

Try again to establish the Wi-Fi connection to the printer after the

Wi-Fi connection to the other camera has been terminated.

Is the power of the printer on?

Try again to establish the Wi-Fi connection after turning on the

printer.

127: An error has occurred

141: Printer is busy. Try connecting again.

142: Could not acquire printer information. Reconnect to

try again.

153

If a problem occurs with the camera, first refer to this Troubleshooting

Guide. If this Troubleshooting Guide does not resolve the problem,

contact the nearest Canon Service Center.

With a Wi-Fi connection established, you cannot use the camera

by connecting it to Connect Station, a computer, or another device

with an interface cable. Terminate the Wi-Fi connection before

connecting the interface cable.

When the camera is connected to Connect Station, a computer, or

another device with an interface cable, you cannot select [51:

Wireless communication settings]. Disconnect the interface

cable before changing any settings.

With a Wi-Fi connection established, operations such as shooting

and playback may not be possible.

Terminate the Wi-Fi connection, then perform the operation.

Even with a combination of the same camera and smartphone, if

you have changed the settings or selected a different setting,

reconnection may not be established even after selecting the same

SSID. In such a case, delete the camera connection settings from

the Wi-Fi settings on the smartphone and set up a connection

again.

If Camera Connect is left running while setting up a connection

again, the connection may not be established. In such a case,

restart Camera Connect.

Troubleshooting Guide

A device connected with an interface cable

cannot be used.

Cannot select [Wireless communication settings].

Operations such as shooting and playback are not

possible.

Cannot reconnect to a smartphone.

Troubleshooting Guide

154

A previously paired smartphone cannot be paired with the camera

again if the camera’s registration is retained on the smartphone. In

such a case, remove the camera’s registration retained in the

Bluetooth settings on the smartphone and try pairing again (p.19).

Cannot pair with a smartphone.

155

If the transmission rate drops, the connection is lost, or other problems

occur when using the wireless communication functions, try the

following corrective actions.

If the camera is too far from the smartphone, a Wi-Fi connection may

not be established even when Bluetooth connection is possible. In such

a case, bring the camera and the smartphone closer together, then

establish a Wi-Fi connection.

When using indoors, install the device in the room where you are

using the camera.

Install the device where people or objects do not come between

the device and the camera.

If the Wi-Fi transmission rate drops because of the influence of the

following electronic devices, stop using them or move further away from

the devices to transmit communication.

The camera communicates over Wi-Fi via IEEE 802.11b/g/n using

radio waves in the 2.4 GHz band. For this reason, the Wi-Fi

transmission rate will drop if there are Bluetooth devices,

microwave ovens, cordless telephones, microphones,

smartphones, other cameras, or similar devices operating on the

same frequency band nearby.

When connecting multiple cameras to one access point via Wi-Fi,

make sure the cameras’ IP addresses are different.

When multiple cameras are connected to one access point via

Wi-Fi, the transmission rate drops.

When there are multiple IEEE 802.11b/g/n (2.4 GHz band) access

points, leave a gap of five channels between each Wi-Fi channel to

reduce radio wave interference. For example, use channels 1, 6,

and 11, channels 2 and 7, or channels 3 and 8.

Wireless Communication Function Notes

Distance Between the Camera and the Smartphone

Installation Location of Access Point Antenna

Nearby Electronic Devices

Cautions for Using Multiple Cameras

Wireless Communication Function Notes

156

When [Wi-Fi] is set to [Enable], image transfer using an Eye-Fi

card is disabled.

When [Bluetooth function] is set to [Remote] to use the Wireless

Remote Control BR-E1, the camera cannot connect to a

smartphone via Bluetooth.

Using an Eye-Fi Card

Using the Wireless Remote Control BR-E1

157

If security settings have not been properly set, the following problems

may occur.

Transmission monitoring

Third parties with malicious intent may monitor the Wi-Fi

transmissions and attempt to acquire the data you are sending.

Unauthorized network access

Third parties with malicious intent may gain unauthorized access to

the network you are using to steal, modify, or destroy information.

Additionally, you could fall victim to other types of unauthorized

access such as impersonation (where someone assumes an

identity to gain access to unauthorized information) or springboard

attacks (where someone gains unauthorized access to your

network as a springboard to cover their tracks when infiltrating

other systems).

It is recommended to make use of the systems and functions to

thoroughly secure your network, preventing these types of problems

from occurring.

Security

158

Windows

Open the Windows [Command Prompt], then type ipconfig/all and

press the <Enter> key.

In addition to the IP address assigned to the computer, the subnet

mask, gateway, and DNS server information are also displayed.

Mac OS

In Mac OS X, open the [Terminal] application, enter ifconfig -a, and

press the <Return> key. The IP address assigned to the computer is

indicated in the [en0] item next to [inet], in the format “***.***.***.***”.

* For information about the [Terminal] application, refer to the Mac OS X help.

To avoid using the same IP address for the computer and other devices

on the network, change the rightmost number when setting up the IP

address assigned to the camera in the processes described on page

163.

Checking Network Settings

Example: 192.168.1.10

159

Reference

160

On the [Wireless communication settings] screen, you can change

the wireless communication function settings.

Press the <M> button, select [Wireless communication settings]

under the [51] tab, then press <0>.

Wi-Fi settings

See the next page.

Wi-Fi function

The following Wi-Fi functions are

available:

Communicate with smartphone

Transfer images between cameras

Remote control (EOS Utility)

Print from Wi-Fi printer

Send images to Web service

Bluetooth function (p.19)

Displays the [Bluetooth function]

screen on which you can set or check

the Bluetooth functions.

Send images to smartphone (p.42)

While the camera is connected to a

smartphone, use this function to send

images stored in the camera to the

smartphone.

Nickname (p.13)

You can change the nickname using the

virtual keyboard (p.162).

Clear settings (p.136)

Clear all wireless communication

settings.

[

Wireless communication settings

] Screen

161

Wi-Fi

You can set whether to [Enable] or

[Disable] the wireless communication

function.

When the use of electronic devices

and wireless devices is prohibited,

such as on board airplanes or in

hospitals, set it to [Disable].

NFC connection (p.29)

You can set whether to [Enable] or

[Disable] NFC connection.

Password

Set to [None] to allow a Wi-Fi connection

to be established without a password

(except when connected to an access

point via Wi-Fi or when establishing a

Wi-Fi connection via Bluetooth using an

iOS smartphone).

Connection history

You can set whether to [Show] or [Hide]

the history of the Wi-Fi connected

devices.

MAC address

You can check the MAC address of the

camera.

[Wi-Fi settings] Screen

162

Changing the entry area

Press the <g> button to toggle

between the top and bottom entry

areas.

Moving the cursor

Press the <Y> <Z> keys in the top

area to move the cursor.

Entering text

In the bottom area, press the <W> <X> or <Y> <Z> keys to select

a character, then press <0> to enter it.

You can check how many characters you have entered and how

many more can be entered by referring to [*/*] on the upper right of

the screen.

Changing the entry mode*

Select [E] at the bottom right of the bottom entry area. Each

time you press <0>, the entry mode will change as follows: Lower

case 9 Numerals / Symbols 1 9 Numerals / Symbols 2 9 Upper

case.

* When [Touch control: Disable] is set, you can enter all characters on one

screen.

Deleting a character

Press the <L> button to delete one character.

Finishing the text entry

Press the <M> button to confirm what you have entered and

exit. If a confirmation dialog is displayed, select [OK] to exit.

Canceling the text entry

Press the button to cancel text entry and exit. If a

confirmation dialog is displayed, select [OK] to exit.

Virtual Keyboard Operation

163

Set up the IP address settings manually. The items displayed vary

depending on the Wi-Fi function.

1Select [Manual setting].

Select [OK] and press <0> to go

to the next screen.

2Select the item to be set.

Select an item and press <0>. The

number entry screen will appear.

To use a gateway, select [Enable],

select [Address], then press <0>.

3Enter the desired values.

Turn the <6> dial to select an input

position in the upper area, then press

the <Y> <Z> keys of the cross keys

to select a number. Press <0> to

enter the selected number.

To set the entered values and return

to the screen for step 2, press the

<M> button.

Setting up the IP Address Manually

164

4Select [OK].

When you have completed setting the

necessary items, select [OK] and

press <0>.

The setting screen for the Wi-Fi

function will appear (p.113).

If you are not sure what to enter, see

“Checking Network Settings” (p.158),

or ask the network administrator or

another person knowledgeable about

the network.

165

Wireless communication status can be checked on the camera’s LCD

monitor and <k> lamp.

Wireless Communication Status

Communication status

LCD monitor <k> lamp

Wi-Fi function Wireless signal

strength Wi-Fi function

Not

connected

Wi-Fi: Disable

Off Off

Wi-Fi: Enable

Connecting (Blinking) Blinking

Connected On

Sending data ()Blinking rapidly

Connection error (Blinking) Blinking

somewhat rapidly

Wireless signal strength

Quick Control screen Information display screen

during playback

Wireless signal strength

Wi-Fi function

LCD monitor

Bluetooth function

Wi-Fi function

 is also displayed on the screen for sending images.

 is displayed when the camera is connected to the access point via

Wi-Fi.

For the display screen and <k> lamp during Live View shooting, refer

to the Camera Instruction Manual.

Wireless Communication Status

166

Bluetooth Function Indicator

* Bluetooth is not connected with a Wi-Fi connection established.

In Camera Connect

Bluetooth function Connection status LCD monitor

Other than

[Disable]

Bluetooth

connected

Bluetooth not

connected

[Disable] Bluetooth not

connected Not displayed

Bluetooth connected

Wi-Fi connected

167

9Wi-Fi

Standards compliance: IEEE 802.11b/g/n

Transmission method: DS-SS modulation (IEEE 802.11b)

OFDM modulation (IEEE 802.11g/n)

Transmission range: Approx. 15 m / 49.2 ft.

* When communicating with a smartphone

* With no obstructions between the transmitting and

receiving antennas and no radio interference

Transmission frequency (central frequency):

Connection method: Camera access point mode, infrastructure*

* Wi-Fi Protected Setup supported

Security: Authentication method: Open system, Shared key, WPA/

WPA2-PSK

Encryption: WEP, TKIP, AES

Communication with a Images can be viewed, controlled, and received using a

smartphone: smartphone.

Remote control of the camera using a smartphone is

possible.

Images can be sent to a smartphone.

Transfer images Transferring one image, Transferring selected images,

between cameras: Transferring resized images

Connect to Images can be sent to and saved on Connect Station.

Connect Station:

Remote operation Remote control functions and image viewing functions of

using EOS Utility: EOS Utility can be used wirelessly.

Print from Wi-Fi Images can be sent to a Wi-Fi printer.

printers:

Send images to a Images in the camera or links to images can be sent to

Web service: registered Web services.

9NFC

Standards compliance: NFC Forum Type 3/4 Tag compliant (dynamic)

9Bluetooth

Standards compliance: Bluetooth Specification Version 4.1 compliant (Bluetooth

low energy technology)

Transmission method: GFSK modulation

 All the data above is based on Canon’s testing standards.

Specifications

Frequency Channels

2412 to 2462 MHz 1 to 11 ch

168

9Countries and Regions Permitting Wireless Communication

Function Use

Use of wireless communication functions is restricted in some countries and

regions, and illegal use may be punishable under national or local regulations. To

avoid violating wireless communication function regulations, visit the Canon

website to check where use is allowed.

Note that Canon cannot be held liable for any problems arising from wireless

communication function use in other countries and regions.

9Model Number

EOS 200D: DS126671

(including WLAN module model: ES200, Bluetooth module model: WM500)

Hereby, Canon Inc., declares that this DS126671 is in compliance with the

essential requirements and other relevant provisions of Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following

internet address: http://www.canon-europe.com/ce-documentation

Wi-Fi Frequency range: 2401 MHz - 2473 MHz

Wi-Fi Maximum output power: 13.64 dBm

Bluetooth Frequency range: 2402 MHz - 2480 MHz

Bluetooth Maximum output power: 7.14 dBm

CANON EUROPA N.V.

Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands

CANON INC.

30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

Wireless Communication Function Precautions

169

Trademarks



Microsoft and Windows are trademarks or registered trademarks of Microsoft

Corporation in the United States and/or other countries.



Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S.

and other countries.



The Wi-Fi CERTIFIED logo and the Wi-Fi Protected Setup mark are

trademarks of the Wi-Fi Alliance.



WPS used on camera settings screens and in this manual stands for Wi-Fi

Protected Setup.



UPnP is a trademark of the UPnP Implementers Corporation.



The Bluetooth



word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks by Canon Inc. is under license.

Other trademarks and trade names are those of their respective owners.



The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the

United States and in other countries.



All other trademarks are the property of their respective owners.

170

Index

Access points................................ 109

Encryption ................................109

Android ...........................................17

Authentication ............................... 109

Bluetooth...................................... 165

Address ......................................27

Connecting .................................19

Camera access point mode ..........123

Camera Connect...............17, 39, 166

CANON iMAGE GATEWAY ............94

Clearing wireless communication

settings .........................................136

Communicating with

a smartphone..................................15

Connect Station ..............................71

Connection history ........................161

Edit device information ...........56, 134

EOS Utility ................................75, 95

Erase connection information ....... 135

Eye-Fi Card.....................................14

Interface cable ................................14

iOS..................................................17

IP address.....................112, 116, 121

Manual setting ..........................163

Keyboard ......................................162

MAC address ....................... 109, 137

Network name 9 SSID

Network settings........................... 158

NFC.......................................... 29, 31

Nickname ....................... 13, 135, 160

Notes on wireless

communications ........................... 155

Pairing ................................ 20, 26, 28

Password ..... 24, 35, 76, 82, 120, 161

PictBridge....................................... 81

PIN code connection mode.......... 114

Print image ..................................... 84

Print order ...................................... 85

Print settings

Cropping .................................... 91

Date/file number ........................ 90

Image optimization..................... 89

Number of copies....................... 90

Paper settings............................ 87

Printer/Printing ......................... 81, 84

Pushbutton connection mode....... 110

Quick Control ................................. 44

Reconnecting ....................... 126, 128

Remote operation..................... 39, 80

Resize image ..................... 49, 64, 99

171

Index

Send images to smartphone...........42

Send images

shown..................... 43, 45, 47, 62, 97

Send range .......................50, 65, 100

Send selected .....................48, 63, 98

Sending all images

on the card........................52, 67, 102

Sending images ..... 42, 44, 46, 62, 97

Sending images that match search

conditions..........................53, 68, 104

Sending images to a Web service ..93

SSID......................24, 35, 76, 82, 118

Stealth functions ...........................109

Switch network..............111, 115, 119

Transferring images

between cameras............................59

Troubleshooting ............................139

View info screen............................137

Viewable images .............................57

Viewing images...............................39

Wi-Fi button.....................................34

Wi-Fi printer ....................................81

Wi-Fi settings ..........................12, 161

Wireless signal strength................165

WPS (Wi-Fi Protected Setup) .......109

PBC mode ................................110

PIN mode..................................114

CANON INC.

30-2 Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

Europe, Africa & Middle East

CANON EUROPA N.V.

Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands

For your local Canon ofﬁce, please refer to your warranty card or to www.canon-europe.com/Support

The product and associated warranty are provided in European countries by Canon Europa N.V.

Table of Contents

Canon 200D + EF-S 18-55mm f/4-5.6 IS STM User Manual

Related Manuals

Canon M50 + EF-M 15-45mm f/3.5-6.3 IS STM + EF-M 55-200mm f/4.5-6.3 IS STM Manual

Canon M50 + EF-M 15-45mm f/3.5-6.3 IS STM + EF-M 55-200mm f/4.5-6.3 IS STM Manual

Canon M50 + EF-M 15-45mm f/3.5-6.3 IS STM + EF-M 55-200mm f/4.5-6.3 IS STM Manual

Canon M50 + EF-M 15-45mm f/3.5-6.3 IS STM + EF-M 55-200mm f/4.5-6.3 IS STM Manual

Canon M50 + EF-M 15-45mm f/3.5-6.3 IS STM + EF-M 55-200mm f/4.5-6.3 IS STM Manual

Canon M50 + EF-M 15-45mm f/3.5-6.3 IS STM + EF-M 55-200mm f/4.5-6.3 IS STM Manual

Canon M50 + EF-M 15-45mm f/3.5-6.3 IS STM + EF-M 22mm f/2 STM Manual