Table of Contents
- Introduction
- Disclaimer
- Notes on Network Security
- Copyright
- Notes on Privacy and Publicity Rights Regarding the Use of Video/Audio
- Trademark Notice
- Notes on the Included Software RM-Lite ( Disclaimer )
- Notes on License Agreement for Included Software
- Only for European Union and EEA (Norway, Iceland and Liechtenstein)
- Open Source Software
- Security Export Control
- How to Read This Operation Guide
- Safety Precautions
- Chapter 1 Before Use
- Chapter 2 Initial Settings
- Chapter 3 Setting Page
- Setting Menu
- Accessing the Setting Menu
- [Network] Setting Administrator Password, LAN, IP Address, DNS, etc
- [Date and Time] Setting Date and Time
- [Camera] Setting Initial Camera Settings and External Device Name
- [Video] Setting Video Size, Quality and Frame Rate
- [RTP] RTP Server, Audio Multicast and RTP Streaming
- [Upload] Setting HTTP/FTP Upload and E-mail Notification
- [Server] Setting the Video Server, Audio Server, HTTP Server, FTP Server and WS-Security
- [Event] Setting Video Record, Volume Detection, External Device Output/Input and Timer
- [Access Control] Setting User Access Privileges
- [IPsec] Setting IPsec
- [SSL/TLS] Setting HTTP Communication Encryption
- [802.1X] Network Port Authentication Settings
- [Memory Card] Memory Card Operations and Settings
- [Reboot Item] Setting Items Requiring Rebooting
- [Maintenance] Viewing Current Settings, Event Logs and Performing Maintenance
- [Camera Angle] Digital Zoom Settings
- Chapter 4 Admin Tools
- Chapter 5 Admin Viewer/VB Viewer
- Chapter 6 Appendix
Canon VB-S31D User Manual
Displayed below is the user manual for VB-S31D by Canon which is a product in the Security Cameras category. This manual has pages.
Related Manuals
ENGLISH
Network Camera
Network Camera
Operation Guide
Be sure to read this User Manual before using the network camera.
2
Thank you for purchasing a Canon Network Camera (hereafter referred to as the camera)*.
For indoor use only.
This Operation Guide explains the camera settings and operations. Read this guide carefully before using the camera to
ensure correct use. Also, be sure to read the files in the LICENSE folder on the Setup CD-ROM.
* The cameras described in this manual may include models not be sold in your country and region.
For the latest information on this product (firmware and included software, user manuals, operating environment, etc.),
please refer to the Canon Web Site.
Disclaimer
To the full extent permitted by laws and regulations, neither
Canon Inc. nor any of its subsidiaries or affiliates shall be
responsible for any financial losses that may be incurred as
a result of the loss of recorded information or images,
regardless of the internal or external cause of the loss.
EXCEPT AS SET FORTH IN THE LIMITED WARRANTY
ACCOMPANYING THE CAMERA AND WITHOUT
DETRACTING FROM ANY RIGHTS A CONSUMER MAY BE
ENTITLED TO, AND TO THE FULL EXTENT PERMITTED BY
LAWS AND REGULATIONS: (1) NEITHER CANON INC. NOR
ANY OF ITS SUBSIDIARIES OR AFFILIATES MAKE ANY
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH
REGARD TO THE MATERIAL IN THIS MANUAL OR WITH
REGARD TO THE USE OF THE CAMERA INCLUDING,
WITHOUT LIMITATION, IMPLIED WARRANTIES AS TO
MARKETABILITY, MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE OR USE, OR NON-INFRINGEMENT
AND (2) NEITHER CANON INC. NOR ANY OF ITS
SUBSIDIARIES OR AFFILIATES SHALL BE LIABLE FOR ANY
DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
OF ANY NATURE RESULTING FROM THE USE OF THIS
MATERIAL OR THE CAMERA.
Notes
1 All rights reserved.
2 The contents of this guide are subject to change
without any prior notice.
3 This document has been prepared with the utmost
attention to accuracy. If you have any comments,
however, please contact a Canon sales representative.
4 Canon shall assume no liability for any outcome of
using this product, regardless of Items 2 and 3 above.
Notes on Network Security
The user is responsible for the network security of this
product and its use.
Take appropriate network security measures to avoid
security breaches.
To the full extent permitted by laws and regulations,
neither Canon Inc. nor any of its subsidiaries or affiliates
shall be liable for any losses, direct, incidental or
consequential damages, or liabilities that may be incurred
as a result of network security incidents such as
unauthorized accesses.
<Network Security Recommendations>
– Register a strong administrator password that cannot
be easily guessed by a third party.
– Change the HTTP or HTTPS port number of the
camera.
– Limit access to the camera by network devices.
For additional network security recommendations, please
refer to the Canon web site.
Copyright
Videos, images or sounds recorded with your camera
may not be utilized or published without consent of
copyright holders, if any, except in such a way as
permitted for personal use under the relevant copyright
law.
Notes on Privacy and Publicity Rights
Regarding the Use of Video/Audio
When using the camera (for video or audio recording), it is
the full responsibility of the user to protect privacy and
avoid any violation of publicity rights. For example, obtain
consent to install the camera in advance if specific
buildings or rooms are to be monitored. Canon shall have
no liability whatsoever in this regard.
Introduction
Introduction
3
Legal Notice
In some cases, camera monitoring may be prohibited by
law or regulation, the details of which differ by country.
Before using the camera, check the laws or regulations of
the country or region where the camera is used.
Trademark Notice
• Canon and the Canon logo are registered trademarks
of Canon Inc.
•
Microsoft, Windows, Windows Vista, Internet Explorer,
Windows
Server, Windows Media and ActiveX are
trademarks or registered trademarks of Microsoft
Corporation in the United States and other countries.
• Windows is legally recognized as the Microsoft Windows
Operating System.
• This product comes with exFAT, a licensed file system
technology from Microsoft.
• microSD, microSDHC and microSDXC Logos are
trademarks of SD-3C, LLC.
• Other brands or product names in this guide are
trademarks or registered trademarks of their respective
companies.
Notes on the Included Software RM-Lite
(Disclaimer)
Flaws or other problems with RM-Lite may result in recording
failure or destruction or loss of recorded data. Canon shall
have no liability whatsoever for any loss or damages
incurred by the user as a result of such problems.
Notes on License Agreement for Included
Software
For information on the License Agreement for Included
Software, refer to the next file in the BundledSoftware
folder in the Included Setup CD-ROM LICENSE folder.
Only for European Union and EEA (Norway,
Iceland and Liechtenstein)
These symbols indicate that this
product is not to be disposed of with
your household waste, according to
the WEEE Directive (2012/19/EU),
the Battery Directive (2006/66/EC)
and/or national legislation
implementing those Directives.
If a chemical symbol is printed beneath the symbol shown
above, in accordance with the Battery Directive, this indicates
that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb =
Lead) is present in this battery or accumulator at a
concentration above an applicable threshold specified in the
Battery Directive.
This product should be handed over to a designated
collection point, e.g., on an authorized one-for-one basis
when you buy a new similar product or to an authorized
collection site for recycling waste electrical and electronic
equipment (EEE) and batteries and accumulators. Improper
handling of this type of waste could have a possible impact
on the environment and human health due to potentially
hazardous substances that are generally associated with
EEE. Your cooperation in the correct disposal of this product
will contribute to the effective usage of natural resources.
For more information about the recycling of this product,
please contact your local city office, waste authority,
approved scheme or your household waste disposal service
or visit www.canon-europe.com/weee, or www.canon-
europe.com/battery.
This product is licensed under AT&T patents for the MPEG-4
standard and may be used for encoding MPEG-4 compliant
video and/or decoding MPEG-4 compliant video that was
encoded only (1) for a personal and non-commercial
purpose or (2) by a video provider licensed under the AT&T
patents to provide MPEG-4 compliant video. No license is
granted or implied for any other use for MPEG-4 standard.
Warning
To reduce a risk of fire or electric shock, do not expose
this product to rain or moisture.
Software Type File Name
Camera Management Tool VBTools-E.txt
RM-Lite Network Video Recording
Software RM-Lite-E.txt
4
Open Source Software
The product (camera and included RM-Lite) contains Open
Source Software modules. For details, please refer to
“ThirdPartySoftware-E.pdf” (Third-Party Software License) in
the Open-SourceSoftware folder in the LICENSE folder on
the Setup CD-ROM. Each module’s license conditions are
also available in the same folder.
Software under GPL and LGPL
If you would like to obtain the source code under GPL/
LGPL, please contact us at nvsossg@canon.co.jp and
provide the following information in English or Japanese:
1. Product name and firmware version.
2. Name of the software module or modules you would like
to obtain.
You can obtain the source code for at least three years
from the day you purchased this product. Please note we
may bill you for any costs we incur in providing you the
source code.
Security Export Control
This product is subject to security export control.
Therefore, to export or carry it overseas may require an
authorization by governmental agencies.
5
User Manuals
The following describes the different camera user
manuals.
In the Setup CD-ROM, the recording software RM-Lite
(see “Chapter 1 Before Use” > “RM-Lite”) is also included.
The following user manuals are available.
How to Use This Operation Guide
The assumed reading format of this user manual is on a
computer screen.
Software Screenshots
The software screenshots shown in these user manuals
are illustrative samples only. The screenshots may differ
from the actual screens displayed.
Screenshots used with the explanations are generally
from a Windows 8 computer connected to the VB-S30D.
This document describes the case when [1920 x 1080 /
960 x 540 / 480 x 270] is selected for the video size set. If
using a different video size set, substitute those sizes
when reading this manual.
Icons Indicating Particular Camera
Models
In the descriptions of functions limited to particular
models, the model names will appear or the following
icons will be used to indicate those models.
Symbols Indicating Safety Precautions
This section explains symbols used in this Operation
Guide. This Operation Guide uses the following symbols
to indicate important information the user should know in
order to use the product safely. Be sure to observe these
items.
How to Read This Operation Guide
Installation Guide (Included)
This guide provides notes and procedures on camera
installation. Sections you should reference in this guide
will be marked “Installation Guide” along with the name
of the reference items.
Operation Guide (This Document)
This document explains the initial camera settings,
Admin Tools settings, viewer operations, troubleshooting
and the main camera specifications, etc. This document
is included in the Setup CD-ROM.
“Camera Management Tool User Manual”
This explains details on using the Camera Management
Tool. It is included in the Setup CD-ROM.
Network Video Recording Software RM-Lite
Administrator Manual
This document gives a detailed explanation of how to
use RM-Lite.
Icon Camera Model
VB-S30D
VB-S31D
VB-S800D, VB-S805D
VB-S900F, VB-S905F
Symbol Meaning
Warning
Failure to follow the instructions
accompanied by this symbol may result
in death or serious injury. Be sure to
observe these warnings to ensure
safety.
Caution
Failure to follow the instructions
accompanied by this symbol may result
in injury. Be sure to observe these
precautions to ensure safety.
Caution
Failure to follow the instructions
accompanied by this symbol may result
in property damage. Be sure to observe
these precautions.
Important
This symbol indicates other actions or
information that should be noted.
Important notes and restrictions are
provided. Be sure to read this section.
Note Contains operational reference
information or additional explanations.
6
The following items must be observed when using the camera.
If they are not observed, injury, death and/or property damage may occur. Read the following information carefully and
observe the instructions without fail.
Important Warnings
Safety Precautions
Caution
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
FDA regulation
This Network Camera has not been evaluated by the
Food and Drug Administration (FDA) for use as a
medical device. When incorporated into a system with
medical applications, FDA regulations may apply.
Therefore, please consult your legal advisor to
determine whether FDA regulations apply.
FCC NOTICE
Network Camera, Model Name: VB-S30D/VB-S31D/
VB-S800D/VB-S900F/VB-S805D/VB-S905F
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Do not make any changes or modifications to the
equipment unless otherwise specified in the manual. If
such changes or modifications should be made, you
could be required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Park, Melville, New York 11747, U.S.A.
Tel No. 1-800-OK-CANON (1-800-652-2666)
Safety Precautions
7
Precautions for Use Precautions for Use of Built-In Camera Functions and
Included Software
Notes on Cleaning
Warning
• If you discover defective conditions such as smoke,
strange sounds, heat or strange odors, immediately
stop using the camera and contact your nearest
dealer.
Continued use of the product may cause fire or electric
shock.
• If thunder starts, stop installation or inspection etc.
and do not touch the camera or continue connecting
the cable.
• Do not disassemble or modify the camera.
• Do not spill water or other liquid inside the camera,
spray the camera with water, or otherwise make it wet.
• Do not insert foreign objects into the camera.
• Do not use flammable sprays near the camera.
• Do not leave LAN cables connected when the camera
is not in use for long periods.
• Do not damage the connecting cable.
This may cause fire or electric shock.
• Do not use with medical devices or other life-support
systems.
Depending on the computer and network environment,
high-precision video transmission cannot be guaranteed
due to video delay or loss.
Canon will assume no liability for any accident or
damage resulting from use of the camera in the
aforementioned devices or systems.
Caution
• Do not capture the sun, halogen lamps, and other very
bright light sources or subjects.
• Do not expose the camera to strong impact or
vibration.
• Do not forcibly turn the rotating parts of
the camera by hand.
This may cause malfunction.
This installation should be made by a qualified service
person and should conform to all local codes.
Caution
• Do not use the built-in camera functions or included
software listed below in cases requiring a high level of
reliability:
– Intelligent functions
– Network video recording software RM-Lite
These features do not guarantee high-precision capture
and cannot support applications beyond their intended
range of use. Canon will assume no liability for any
accident or damage resulting from the use of these
functions.
Warning
• Do not use alcohol, thinner, benzine or any other
flammable solvent.
This may cause fire or electric shock.
Caution
• Periodically check the parts and screws for rust and
loosening.
For inspections, please contact the dealer where you
purchased the product.
Failure to comply could result in injuries and equipment
damage due to falling items.
8
Maintenance
Turn off the power before cleaning the camera.
Cleaning of Exterior
1 Dampen a soft cloth with water or diluted neutral
detergent and wipe away the grime gently.
2 Wipe with a dry cloth.
Cleaning of Lens
Use a commercial lens cleaner to remove grime on the
lens surface.
• Auto focus may not work properly if the lens
surface is dusty or dirty.
• Be aware that scratches on the lens surface may result
in poor video capture.
Cleaning the Top Cover
Grime on the top cover will reduce video quality, so
periodic cleaning is required.
If the surface of the top cover cannot be cleaned well,
remove it following the steps below to clean it more
thoroughly.
1 Remove the top cover.
See steps in “Installing the Camera” in the “Installation
Guide” included with the camera to remove the top
cover.
2 Dampen a soft cloth with water or diluted neutral
detergent and wipe away the grime gently.
3 Wipe with a dry cloth.
4 Reattach the top cover to its original position.
Periodically check the brackets and screws for rust and
loosening to prevent injuries and equipment damage due
to falling items.
For inspections, please contact the dealer where you
purchased the product.
Disposing of the Camera
Dispose of the camera in accordance with local laws and
regulations.
When disposing of the camera, do not forget to remove
the memory card.
9
Table of Contents
Introduction .................................................................................................................. 2
Disclaimer ............................................................................................................................... 2
Notes on Network Security...................................................................................................... 2
Copyright................................................................................................................................. 2
Notes on Privacy and Publicity Rights Regarding the Use of Video/Audio ............................ 2
Trademark Notice.................................................................................................................... 3
Notes on the Included Software RM-Lite (Disclaimer) ........................................................... 3
Notes on License Agreement for Included Software .............................................................. 3
Only for European Union and EEA (Norway, Iceland and Liechtenstein)...............................3
Open Source Software ............................................................................................................4
Security Export Control ........................................................................................................... 4
How to Read This Operation Guide............................................................................. 5
User Manuals .......................................................................................................................... 5
How to Use This Operation Guide .......................................................................................... 5
Icons Indicating Particular Camera Models............................................................................ 5
Symbols Indicating Safety Precautions................................................................................... 5
Safety Precautions....................................................................................................... 6
Maintenance............................................................................................................................ 8
Disposing of the Camera ........................................................................................................ 8
Chapter 1 Before Use
Features..................................................................................................................... 14
Camera Software....................................................................................................... 15
Installed Software.................................................................................................................. 15
Included Software ................................................................................................................. 15
Additional License (Sold Separately).................................................................................... 15
Network Video Recording Software (Sold Separately) ......................................................... 15
RM-Lite (Please refer to the “Administrator Manual”) ........................................................... 17
Operating Environment.............................................................................................. 18
Admin Viewer/VB Viewer, Admin Tools................................................................................. 18
Notes on Operating Environment .............................................................................. 19
Notes on Use When the [Windows Firewall] Function is Enabled ........................................ 19
Notes on Use with Internet Explorer 9 or Greater and Windows Server 2008/
Windows Server 2012....................................................................................................... 19
Notes on Use with Windows Server 2008/Windows Server 2012 ......................................... 20
10
Chapter 2 Initial Settings
Preparing the Camera for Use................................................................................... 24
Installing the Necessary Software ............................................................................. 26
Making Initial Camera Settings .................................................................................. 28
Flow of Configuration Using the Camera Management Tool ................................................ 28
Accessing from the Web Browser......................................................................................... 28
Access the Top Page of the Camera to Check Video ............................................... 29
Access the Top Page from Camera Management Tool........................................................ 29
Top Page............................................................................................................................... 29
Checking Camera Video ....................................................................................................... 30
Chapter 3 Setting Page
Setting Menu.............................................................................................................. 34
Accessing the Setting Menu ...................................................................................... 36
Setting Menu ......................................................................................................................... 36
Items Common to All Setting Pages...................................................................................... 36
[Network] Setting Administrator Password, LAN, IP Address, DNS, etc ................... 38
[Date and Time] Setting Date and Time .................................................................... 42
[Camera] Setting Initial Camera Settings and External Device Name....................... 44
[Video] Setting Video Size, Quality and Frame Rate ................................................. 48
[RTP] RTP Server, Audio Multicast and RTP Streaming........................................... 51
[Upload] Setting HTTP/FTP Upload and E-mail Notification...................................... 53
[Server] Setting the Video Server, Audio Server, HTTP Server, FTP Server and
WS-Security ......................................................................................................... 56
[Event] Setting Video Record, Volume Detection, External Device Output/
Input and Timer .................................................................................................... 58
[Access Control] Setting User Access Privileges....................................................... 62
[IPsec] Setting IPsec.................................................................................................. 64
[SSL/TLS] Setting HTTP Communication Encryption................................................ 67
[802.1X] Network Port Authentication Settings.......................................................... 69
[Memory Card] Memory Card Operations and Settings............................................. 71
[Reboot Item] Setting Items Requiring Rebooting ..................................................... 74
[Maintenance] Viewing Current Settings, Event Logs and
Performing Maintenance ...................................................................................... 75
[Camera Angle] Digital Zoom Settings ............................................................... 77
11
Table of Contents
Chapter 4 Admin Tools
Admin Tools Overview............................................................................................... 80
Admin Tools ......................................................................................................................... 80
Privacy Mask Setting Tool .................................................................................................... 80
Panorama Creation Tool ...................................................................................................... 80
View Restriction Setting Tool ................................................................................................ 80
Preset Setting Tool ............................................................................................................... 81
Intelligent Function Setting Tool ........................................................................................... 81
Log Viewer ........................................................................................................................... 81
Recorded Video Utility ......................................................................................................... 81
Accessing the Admin Tools ....................................................................................... 82
Launching the Admin Tools .................................................................................................. 82
Privacy Mask Setting Tool ......................................................................................... 83
Display Screen of Privacy Mask Setting Tool........................................................................ 83
Setting the Privacy Mask Area .............................................................................................. 84
Changing/Deleting a Privacy Mask Area .............................................................................. 86
Panorama Creation Tool........................................................................................... 87
Display Screens of Panorama Creation Tool ........................................................................ 88
Capturing a Panorama Image............................................................................................... 88
Saving/Deleting a Panorama Image on the Camera............................................................. 89
Saving a Panorama Image as Image Files/Opening from Image Files................................. 89
View Restriction Setting Tool.................................................................................... 90
Display Screens of View Restriction Setting Tool.................................................................. 91
Setting View Restrictions.......................................................................................................92
Preset Setting Tool .................................................................................................... 94
Display Screens of Preset Setting Tool ................................................................................. 95
Setting the Preset .................................................................................................................. 96
Preset Tour ........................................................................................................................... 99
Intelligent Function Setting Tool .............................................................................. 101
Display Screen of Intelligent Function Setting Tool.............................................................104
Flow of Intelligent Function Setting ..................................................................................... 105
Setting Intelligent Function Detection Settings ................................................................... 107
Log Viewer............................................................................................................... 113
Display Screens of Log Viewer ........................................................................................... 113
Downloading Log Files........................................................................................................ 114
How to View Logs................................................................................................................114
Recorded Video Utility ............................................................................................. 116
Display Screens of Recorded Video Utility ......................................................................... 116
Confirming Recorded Video................................................................................................ 117
Narrowing Down the Number of Videos..............................................................................117
Downloading Video ............................................................................................................. 118
Exporting to Video Files That Can Be Played Back ............................................................118
Playing Back Videos ........................................................................................................... 118
Deleting Videos ................................................................................................................... 120
Displaying Memory Card Information ................................................................................. 120
12
Control for Admin .................................................................................................... 121
Using Control for Admin...................................................................................................... 121
Chapter 5 Admin Viewer/VB Viewer
Overview of Viewer.................................................................................................. 124
Major Differences Between the Admin Viewer and the VB Viewer ..................................... 124
User Authorities and Camera Control Privileges................................................................. 124
Launching the Viewer .............................................................................................. 126
Launching the Viewer.......................................................................................................... 126
Shutting Down the Viewer ................................................................................................... 126
Connecting from Admin Tools............................................................................................. 126
How to Operate the Viewer...................................................................................... 127
Display Screens of Admin Viewer ....................................................................................... 127
VB Viewer ............................................................................................................................ 128
Obtaining Camera Control Privileges.................................................................................. 129
Controlling the Camera ....................................................................................................... 130
Magnifying Part of the Video (Viewer PTZ) ......................................................................... 132
Cropping and Displaying Part of Video (Digital PTZ) ........................................................ 134
Setting Video and Audio ..................................................................................................... 135
Checking Information .......................................................................................................... 138
Performing Operations and Settings in the Admin Viewer....................................... 139
Using Control for Admin...................................................................................................... 139
Displaying Event Status ...................................................................................................... 144
Recording to a Memory Card Manually .............................................................................. 145
Chapter 6 Appendix
Memory Card Access .............................................................................................. 148
Modifiers .................................................................................................................. 150
Troubleshooting ....................................................................................................... 152
List of Log Messages............................................................................................... 154
Log Messages on the Camera............................................................................................ 154
List of Viewer Messages.......................................................................................... 163
Messages Displayed in the Information Field ..................................................................... 163
Restore Default Settings.......................................................................................... 165
Restoring the Initial Setting from the Maintenance Page in the Web Browser.................... 165
Restoring Factory Default Settings with the Reset Switch on the Camera.......................... 165
List of Factory Default Settings................................................................................ 167
Specifications........................................................................................................... 175
Index ........................................................................................................................ 179
Chapter 1
Before Use
❏Camera Features
❏Software Information
❏Operating Environment and Precautions
14
This camera integrates both camera and server functions into a compact network camera.
*1 The video quality of the VB-S805D/VB-S905F is 1.3M.
*2 For the VB-S805D/VB-S905F, video sizes can be selected from 720p and 4:3 categories (two categories).
*3 In this manual, the memory card that can be used with the camera is referred to as “memory card”.
Features
Compact and Lightweight Small and light while maintaining full HD video quality*1, and easy to install.
Low Illumination Video Capture The camera can capture color video even with low subject illumination.
Equipped with AF Zoom Lens The camera is equipped with a 3.5x optical (4x digital) zoom lens with auto focus.
Pan/Tilt Functions You can operate camera angle controls remotely.
Smart Shade Control Auto Mode The camera analyzes the video brightness, and automatically adjusts the exposure
compensation and dark space compensation levels.
3 Video Size Categories*2Video sizes can be selected from 1080p, 720p, and 4:3 categories.*2
Video Distribution Supports two video compression methods (JPEG/H.264). Multi-stream distribution is also
supported using different video sizes belonging to the same category.
Custom Settings Preset camera settings can be applied (or loaded) when switching between day/night
mode or by a timer.
Supports microSD/microSDHC/
microSDXC memory cards*3
You can record video and logs when uploading fails, and record video as JPEG or H.264
files to memory cards (manual, timer, and event recording are supported). Recorded Video
Utility in Admin Tools allows you to search and play back recorded video.
Intelligent Functions The camera boasts a variety of intelligent functions that offer the wide array of detection options.
Moving object detection, abandoned object detection, removed object detection,
tempering detection, passing detection, volume detection.
Small-Scale Video Monitoring via RM-Lite
Software (Supplied)
By using the supplied network video recording software, RM-Lite, you can record and
display live video from up to four cameras.
15
1
Before Use
Installed Software
Admin Viewer/VB Viewer
(See Chapter 5 “Admin Viewer/VB Viewer”)
There are two types of Viewer: the VB Viewer, which can
be used by Guest Users, and the Admin Viewer for
Administrators.
The VB Viewer allows users to configure basic camera
controls and display video.
The Admin Viewer lets you monitor all camera controls
and events.
Admin Tools (See Chapter 4 “Admin Tools”)
The following tools for configuring camera settings and
performing management functions are available:
• Privacy Mask Setting Tool
• Panorama Creation Tool
• View Restriction Setting Tool
•Preset Setting Tool
• Intelligent Function Setting Tool
• Log Viewer
• Recorded Video Utility
Included Software
The included Setup CD-ROM contains the following
software. Install the software on a computer to use it.
Camera Management Tool
This tool is used for batch managing multiple cameras,
from making settings to performing maintenance.
Admin Tools Certificate
This electronic certificate is required to use the Admin
Viewer and Admin Tools.
.NET Framework 3.5 SP1/.NET Framework
4.5
This execution environment is required to use the software
included in the camera.
RM-Lite (p. 17)
This software displays and records video from up to four
cameras in real time.
Proxy Authentication Admin Viewer/Admin
Tools
This software lets you use Admin Viewer/Admin Tools via
a proxy server with proxy authentication. It is saved in the
ProxyAuthSupport folder on the Setup CD-ROM.
Additional License (Sold Separately)
You can purchase additional licenses as necessary.
Canon H.264 Additional User License AUL-
VB (Sold Separately)
Additional license added for viewing H.264 video with
multiple computers via Admin Viewer or Recorded Video
Utility.
Each camera includes one license. Additional licenses
are necessary for multiple computers to view H.264 video
from a single camera.
Network Video Recording Software (Sold
Separately)
You can purchase additional software and licenses as
necessary.
RM-64/RM-25/RM-9
This software allows network cameras to be used for
multipoint surveillance, and for recording and playing
back videos from the camera. The number of cameras
that can be registered with RM-64/RM-25/RM-9 varies: 64,
25, or 9 cameras can be registered. By using multiple
Storage Servers, you can construct a surveillance system
supporting up to 512 cameras.
Note
Licenses for upgrading from RM-9 to RM-25 or RM-64, and from
RM-25 to RM-64 are also available.
Camera Software
16
RM-V
This additional license lets you install RM-64/RM-25/RM-9
RM Manager and Viewer on multiple computers.
Purchase the license to be able to view video captured by
the camera from multiple sites and for other similar
purposes.
RM-Lite-V
This additional license lets you install the RM-Lite Viewer
and RM-Lite Manager on multiple computers. Purchase
the license to be able to view video captured by the
camera from multiple sites and for other similar purposes.
Camera Software
17
1
Before Use
RM-Lite (Please refer to the “Administrator Manual”)
The installer (RMLiteInstall.exe) can be found in the Applications folder on the Setup CD-ROM.
RM-Lite Software Configuration
Note
For details on the usage, operating environment and functions of RM-Lite, please refer to the “Administrator Manual”.
Type Overview License
RM-Lite Storage Server Up to four cameras can be registered to record video (JPEG). 1 license
RM-Lite Viewer
Plays recorded video saved in the storage server and displays live
video (JPEG/H.264) captured by the camera.
Up to four cameras can be registered for the viewer.
1 license
RM-Lite Manager Used for registering cameras and configuring recording schedules 1 license
Supported cameras
VB-R11VE, VB-R11, VB-R10VE, VB-M641VE, VB-M641V, VB-M640VE, VB-M640V,
VB-M741LE, VB-M740E, VB-H43, VB-H630VE, VB-H630D, VB-H730F, VB-M42, VB-M620VE,
VB-M620D, VB-M720F, VB-S30D, VB-S31D, VB-S800D, VB-S900F, VB-S805D, VB-S905F,
VB-H41, VB-H610VE, VB-H610D, VB-H710F, VB-M40, VB-M600VE, VB-M600D, VB-M700F,
VB-C60, VB-C500VD/VB-C500D, VB-C300, VB-C50i/VB-C50iR, VB-C50FSi/VB-C50Fi
Important
To add the RM-Lite Viewer or RM-Lite Manager, you must purchase RM-Lite-V (sold separately).
RM-Lite Viewer RM-Lite Storage Server
Network
Flow of Video from the Camera
Flow of Recorded Video
18
For the latest information on this product (firmware and included software, user manuals, operating environment, etc.),
please refer to the Canon Web Site.
Admin Viewer/VB Viewer, Admin Tools
*1 Set the Control Panel’s font size (DPI) for Admin Tools and Admin Viewer to 100% or 125%.
*2 The browser must support JavaScript, XAML browser applications, and IFRAME (HTML tag).
The VB Viewer requires cookies.
*3 Installation is unnecessary if only VB Viewer will be used. .NET Framework 3.5 SP1 and 4.5 are provided on the included
setup CD-ROM, and the appropriate installer is selected automatically depending on the version of Internet Explorer.
*4 The included software or the software installed on the camera cannot be started from the Start screen added to
Windows 8 or greater.
Note
For details on the operating environment of Camera Management Tool, please refer to “Camera Management Tool User Manual”.
Operating Environment
CPU Intel Core i7-2600 or higher
Operating Systems*1
Windows Vista Ultimate/Business/Enterprise/Home Premium SP2 32/64-bit
Windows 7 Ultimate/Professional/Enterprise/Home Premium SP1 32/64-bit
Windows 8/Windows 8 Pro/Windows 8 Enterprise 32/64-bit *4
Windows 8.1/Windows 8.1 Pro/Windows 8.1 Enterprise 32/64-bit *4
Windows Server 2008 Standard SP2 32/64-bit
Windows Server 2008 R2 Standard SP1 64-bit
Windows Server 2012 Standard 64-bit *4
Windows Server 2012 R2 Standard 64-bit *4
Web Browser*2Internet Explorer 8/9 32-bit
Internet Explorer 10/11
Memory 2 GB or more
Viewer Display 1920 x 1080 or higher
Software*3
.NET Framework 3.5 SP1 (When using Internet Explorer 8/9)
– Must be installed on Windows Vista and Windows Server 2008 systems
.NET Framework 4.5 (When using Internet Explorer 10/11)
– Must be installed on Windows 7 and Windows Server 2008 R2 systems
Audio When using the camera’s audio feature, the computer audio support feature is
required.
19
1
Before Use
Notes on Use When the [Windows
Firewall] Function is Enabled
When the Camera Management Tool is started, the
[Windows Security Alert] dialog box may appear.
If the [Windows Security Alert] dialog box appears, click
[Unblock].
Once this button is clicked, the warning dialog box will no
longer appear.
If the [Windows Security Alert] dialog box does not appear,
the Windows firewall warning function may be disabled.
Follow the procedure below to add the [Camera
Management Tool] as a Windows Firewall exception.
Notes on Use with Internet Explorer 9 or
Greater and Windows Server 2008/
Windows Server 2012
Registering the IP address of the Camera as
a Trusted Site
In Internet Explorer 9 or greater and Windows Server 2008/
Windows Server 2012, the security level for Internet sites and
intranet sites on Internet Explorer is set to [High] by default.
Thus, when accessing the Admin Viewer/VB Viewer, the
camera’s Setting Page or the Admin Tools, a content block
dialog box appears and the page fails to display correctly.
To correct this problem, follow the procedure below to
register the top page as a trusted site.
Note
• Set the camera IP address with the Camera Management Tool.
• If you skip registration in this step, you can perform registration
later using Camera Management Tool.
Notes on Operating Environment
1Click [Windows Firewall] in [Control Panel] > [System
and Security].
2Click [Allow an app or feature through Windows
Firewall] > [Change settings] > [Allow another app].
3Select [Camera Management Tool], and then click
[Add].
1Click [Tools] menu > [Internet Options] in Internet Explorer.
2Click the [Security] tab.
20
The [Trusted sites] dialog box appears.
Note
• Clear the [Require server verification (https:) for all sites in this
zone] check box if it is selected. The camera’s IP address will
be registered to the [Websites] list.
• You can register IP addresses for multiple cameras by using a
wildcard (*) when entering the IP address. For example, if you
enter “192.160.1.*”, all cameras that share the “192.160.1”
portion of the address will be registered as trusted sites.
Notes on Use with Windows Server 2008/
Windows Server 2012
Registering “about:internet” and the
Camera Host Name
Admin Viewer and Admin Tools will not start when IE ESC
(Internet Explorer Enhanced Security Configuration) is
enabled in Windows Server 2008/Windows Server 2012.
Before using the tools, register “about:internet” and the
host name for the connected camera in the Internet
Explorer “local intranet” and “trusted sites” lists.
Web Browser Security Settings When Using
SSL Connection
When an SSL connection to the camera is made from a
web browser (Internet Explorer 9/10/11) in Windows
Server 2008/Windows Server 2012, the following
operations may display the content block dialog box and
prevent further operation.
• Startup of Admin Tools or Admin Viewer
• Audio reception from VB Viewer
This happens when Internet Explorer Enhanced Security
Configuration (IE ESC) is enabled in Internet Explorer 9/
10/11. Use the procedures below to change this setting.
3
Click [Trusted sites] > [Sites].
4Enter the IP address of the camera under [Add this
Web site to the zone], then click [Add].
Important
When “about:internet” is registered, the security level in
Windows 7 is the same as when using Internet Explorer. After
using the Admin Viewer/Admin Tools, it is recommended that
you remove “about:internet” and the camera name as
necessary and restore the original security level.
1Click [Internet Options] in the [Tools] menu in Internet
Explorer 9/10/11 and click the [Advanced] tab.
2Clear the [Do not save encrypted pages to disk]
checkbox in [Security].
Notes on Operating Environment
21
1
Before Use
Enabling the Sound Function to Use Audio
In Windows Server 2008/Windows Server 2012, the sound
function is disabled by default.
To receive audio with the Viewer, follow the steps below to
enable the sound function.
Note
If [Control Panel] is in the classic view, double-click [Sound].
Important
Note that when IE Enhanced Security Configuration is turned
back on, the [Do not save encrypted pages to disk] checkbox
also becomes enabled.
1Open [Control Panel] and click [Hardware].
2Click [Sound].
3When the [Audio Service Not Running] message
appears, click [Yes].
4The [Sound] dialog box appears.
Click the [Playback] tab to confirm that an audio device
has been installed. (If no audio device is installed, refer
to your computer manual.)
22
Chapter 2
Initial Settings
❏Preparing the Camera for Use
❏Installing the Necessary Software
❏Initial Settings
❏ Access the Top Page of the Camera to Check Video
24
▼
▼
▼
▼
▼
▼
Preparing the Camera for Use
Performing Initial Settings for the Camera
Before installing the camera, read this chapter and use the Camera Management Tool to
configure the IP address.
“Installing the Necessary Software” (p. 26)
“Making Initial Camera Settings”
Checking Video
When initial settings are complete, access the camera via a web browser and check the
video using the VB Viewer.
“Access the Top Page of the Camera to Check Video” (p. 29)
Installing the Camera
Install the camera to suit the operating environment it will be used in.
“Installation Guide”
Configuring the Camera from the Setting Page
The setting page lets you configure basic camera settings, network operations, user
registration, and access restrictions.
“Chapter 3 Setting Page”
Using Admin Tools
Admin Tools let you set viewing restrictions, make preset settings, and make settings for
using intelligent functions. In addition, you can review logs to check on the camera’s
operation status.
“Chapter 4 Admin Tools”
Using Admin Viewer/VB Viewer
The camera’s built-in Admin Viewer/VB Viewer features an Admin Viewer for
administrators and a VB Viewer for guest users. Use the VB viewer to check distribution to
guest users and Admin Viewer to check all operations.
“Chapter 5 Admin Viewer/VB Viewer”
Preparing the Camera for Use
25
2
Initial Settings
Operating
If an error message appears or the camera fails to operate correctly, see the error
message and log message information in “Chapter 6 Appendix”.
“Chapter 6 Appendix”
Important
Before starting operations, make sure that the setting page and Admin Tools settings are functioning correctly.
26
Install the following software to perform initial settings for the camera.
• Camera Management Tool: Software required for performing initial camera settings and maintenance
• Admin Tools Certificate: An electronic certificate that is required for using Admin Viewer and Admin Tools
• .NET Framework 3.5 SP1/.NET Framework 4.5: The execution environment required for network camera software (not
required if already installed on the computer)
You can perform either an Easy Installation or a Custom Installation of the software.
Note
• All computer users will be able to use Admin Viewer and Admin Tools if the Admin Tools certificate was installed by the installer.
• Select [Custom Installation] and install only the “Admin Tools Certificate” if you intend to use the Admin Viewer and Admin Tools on a
computer other than the one where the Camera Management Tool is installed.
The installation screen appears.
Note
If the [User Account Control] screen appears, click [Yes] or
[Continue].
[Easy Installation]: Camera Management Tool and
Admin Tools certificate are installed.
[Custom Installation]: The user can select and install
desired software.
The User License Agreement screen appears.
Installation starts.
Installing the Necessary Software
1Insert the Setup CD-ROM included in the camera in
the disc drive on the computer.
2After confirming that all other applications have been
closed, click the [Start] menu > [My Computer].
3Double-click the CD-ROM icon > [Applications] folder
> [VBToolsInstall.exe].
4Select the installation method.
5After selecting [Easy Installation], click [Next] and after
selecting [Custom Installation], select the checkboxes
of the software you want to install and click [Next].
6Read through the user license agreement and click
[Yes] if you accept it.
7When the installation complete screen appears, click
[Exit] or [Reboot].
Installing the Necessary Software
27
2
Initial Settings
The Camera Management Tool icon appears on the
desktop.
28
To use a camera, it is necessary to first set the
administrator password for the camera, then configure the
network settings, and then connect the camera and
computer via the network. Use the Camera Management
Tool to configure these settings.
The Camera Management Tool also enables multiple
cameras to be configured at the same time.
As cameras are assigned IP addresses (192.168.100.1) in
their factory desfault state, their initial settings can also be
configured via a web browser.
Flow of Configuration Using the Camera
Management Tool
Launching the Camera Management Tool
Searching for Cameras
Search for cameras connected to the same network as
the computer in which the Camera Management Tool is
installed.
Registering the Administrator Password
Configuring Initial Camera Settings
Configure the basic settings of the camera, such as the
network settings and camera name.
For information on how to use the Camera Management
Tool, please refer to the “Camera Management Tool User
Manual”.
Accessing from the Web Browser
The [Default Settings] page will be displayed.
After the camera reboots, the top page is displayed
and you can configure the settings.
Making Initial Camera Settings
1Launch the web browser.
2Enter 192.168.100.1, and press the Enter key.
3Enter the administrator password, and click [Apply].
29
2
Initial Settings
When initial camera settings are complete, access the
camera with the Camera Management Tool and check if
video can be viewed properly.
Access the Top Page from Camera
Management Tool
You can use the Camera Management Tool to launch the
camera top page.
The web browser will start and the camera top page
appears.
Note
• The web browser will not start when [Connection Status] for a
camera is [Not connectable].
• You can also launch the camera top page by entering the IP
address configured with the Camera Management Tool
directly into the web browser.
• If the camera top page does not launch, please refer to
“Troubleshooting” (p. 152)
Top Page
From the top page of the camera, you can navigate to the
Setting Page to configure various camera settings, launch
Admin Tools, and access Viewers to view video.
(1) Language Button
Click to switch the display language.
(2) [Setting Page]
Displays the Setting Page (p. 36).
You can make initial camera settings and settings to
suit how the camera will be used.
(3) [Admin Tools]
Displays the Admin Tools top page (p. 80).
You can launch various tools for making settings, such
as for using the camera, or launch a utility for
managing recorded video.
(4) [Admin Viewer]
Launches the Admin Viewer (p. 30).
(5) [VB Viewer]
Launches the VB Viewer (p. 30).
User Authentication
When you use the Setting Page, Admin Tools or Admin
Viewer, an authentication screen appears, and you are
prompted to enter a user name and password.
If you enter the wrong user name or password, you will not
be able to connect to the camera. Enter the correct user
name and password and connect to the camera.
Access the Top Page of the Camera to Check Video
1Launch the Camera Management Tool.
2Double-click the IPv4 address of a camera in the
camera list to launch its top page.
(1)
(2)
(3)
(4)
(5)
Authentication Screen for Setting
Page
Authentication Screen
for Admin Tools/Admin
Viewer
30
The factory default user name and password are:
User Name: root
Password: Set your own password when accessing a
camera for the first time.
The user name “root” (fixed) is the administrator account
for the camera.
Note
• Only administrators can connect to a camera using the Setting
Page and Admin Tools.
• Authorized users with camera control privileges can also
connect using Admin Viewer. You can set the user privileges of
registered users with [Access Control] > [User Authority] on
the Setting Page (p. 62).
• Depending on the security settings in Internet Explorer, the
blocked content dialog box may appear when attempting to
access the Setting Page, Admin Tools or the Viewers when
using the camera with Internet Explorer 9 or greater, or on
Windows Server 2008/Windows Server 2012. If this happens,
click [Add] to register the camera IP address as a trusted site.
Checking Camera Video
Check the camera video with a viewer. VB Viewer and
Admin Viewer are available.
This section only explains how to launch a viewer for
checking video. For details on how to use each Viewer,
please refer to “Admin Viewer/VB Viewer” (p. 123).
Note
If the blocked content dialog box appears when you launch a
viewer, click [Add] in the dialog box to register the camera’s IP
address as a trusted site.
Viewing Video With VB Viewer
VB Viewer allows any user with camera access to use the
camera. The user, however, is restricted to a limited set of
functions.
When you click [VB Viewer] on the top page, the VB
Viewer launches and displays the camera video.
Viewing Video With Admin Viewer
The Admin Viewer can only be used by administrators
and registered users with camera control privilege. It
allows complete control of the camera.
The user authentication window appears.
The Admin Viewer launches and displays the camera
video.
Important
• To ensure system security, register a strong administrator
password that cannot be easily guessed by a third party. Do
not forget the password.
• Restore factory default settings if you have forgotten the
administrator password (p. 165). Note that this will reset all
camera settings to factory default settings except for date
and time.
• If you connect to the camera using the administrator account,
it will not be possible to connect with administrator privileges
from a different computer.
• If the administrator and an authorized user share the VB
Viewer on the same computer, it is strongly recommended
that the [Remember my credentials] check box be cleared.
• The Admin Tools and the Admin Viewer cannot be used if an
IPv6 address is specified. Only host names are supported for
IPv6 connections.
1Click [Admin Viewer] on the top page.
2Enter a user name and password (p. 29) and click
[OK].
Access the Top Page of the Camera to Check Video
31
2
Initial Settings
32
Chapter 3
Setting Page
❏Administrator Password and Network Detailed Settings
❏Camera Date and Time Settings
❏Camera Name and Initial Camera Settings Related Settings
❏Video Size and Quality Settings
❏RTP Streaming Settings
❏Upload and E-mail Notification Settings
❏Video Server, Audio Server, HTTP/FTP Server and WS-Security Settings
❏Settings Related to Events
❏Administrator Password, User Registration/Authorities and Access Restriction
Settings
❏IPsec Settings
❏HTTP Communication Encryption (SSL/TLS) Settings
❏802.1X Authentication
❏Memory Card Operations and Displaying Information
❏Settings for Items Requiring Rebooting
❏Maintenance (Displaying Log and Setting Information/Rebooting/Factory
Default Settings)
❏Camera Angle
34
From the Setting Menu, you can navigate to each setting page to set various items regarding the camera.
Information describing what can be set from each setting page is listed as follows. See each setting page for details.
•Network
Administrator password, LAN, IPv4, IPv6, DNS, mDNS
and SNMP Settings (p. 38)
• Date and Time
Camera date and time, time zone and daylight saving
time settings (p. 42)
• Camera
Camera name, initial camera settings, camera control,
day/night, installation conditions, camera position
control, external input device name and external output
device name settings (p. 44)
• Video
Video quality, video size, and frame rate settings for the
video size set, JPEG and H.264, as well as on-screen
display settings (p. 48)
•RTP
RTP Server, Audio Multicast and RTP Streaming
settings (p. 51)
•Upload
General upload and HTTP and FTP upload settings
and e-mail notification settings (p. 53)
•Server
Video server, audio server, HTTP Server, FTP Server
and WS-Security settings (p. 56)
•Event
Video record settings, volume detection, external
device output, external device input and timer settings
(p. 58)
• Access Control
Administrator Password, Authorized user account, user
authorities, host access restriction settings (p. 62)
•IPsec
IPsec settings (p. 64)
•SSL/TLS
Certificate creation, administrative settings and
encrypted communication settings (p. 67)
•802.1X
802.1X authentication settings and authentication
status display (p. 69)
• Memory Card
Memory card operations and information display
(p. 71)
• Reboot Item
Setting items that require the camera to be rebooted
(p. 74)
• Maintenance
Device information, displaying logs and current
settings, rebooting, restoring initial settings, backing
up/restoring settings and log notifications (p. 75)
• Camera Angle
Digital zoom settings (p. 77)
•User Page
Link to web page customized by the user (For details,
contact your nearest Canon Customer Service Center.)
Setting Menu
Setting Menu
Setting Menu
35
Setting Page
3
Important
Notes on Use with Internet Explorer 8/9/10/11
If the pop-up is blocked and an information bar appears when
attempting to access [View Logs] or [View Current Settings] on
the maintenance page, enable Pop-up by following the procedure
explained in the information bar.
36
The various settings of the camera are configured by accessing the camera in the web browser. First, access the top page
of the camera (p. 29).
For details on entering the user name and password, see p. 29.
Note
You can also access the Setting Page from the Camera Management Tool. For details, please refer to the “Camera Management Tool User
Manual”.
Setting Menu
(1) [Admin Viewer]
Clicking this button opens Admin Viewer.
(2) [Back to top]
Clicking this button navigates to the top page.
(3) Setting Menu
Clicking these navigates to each setting page.
Note
The following message is displayed to the right of the title of the
settings menu even when the administrator password of more
than eight characters is set.
“8 characters or more are recommended for the administrator
password.”
Items Common to All Setting Pages
Applying New Settings
When a setting is changed on any setting page, [Apply]
shown on the top right and bottom right of the setting
page turns from grayed-out to blue.
Click [Apply] to make the new setting effective.
Click [Clear] to restore the previous setting.
Setting Changes Requiring Rebooting
Items that require the camera to be rebooted in order to
change settings are flagged with an orange mark.
When any item accompanied by an orange mark is
changed, the [Apply] shown at the top right and bottom
right of each setting page changes to [Apply and reboot].
Click [Apply and reboot] to confirm the new setting. The
new setting will be reflected and the camera will be
rebooted.
Click [Clear] to restore the previous setting.
Accessing the Setting Menu
Important
To ensure security, exit the web browser after completing
settings on the Setting page and after using Admin Viewer/
Admin Tools.
(1) (2)
(3)
Important
Setting changes will be lost if you navigate to another setting
page without clicking [Apply] or [Apply and reboot]. Be sure to
click [Apply] or [Apply and reboot] to make the new settings
effective.
Accessing the Setting Menu
37
Setting Page
3
Returning to the Setting Menu
Click [Settings menu] at the top right of each setting page
to return to the Setting Menu.
Note
Click on [Help] at the beginning of any item to display a
detailed explanation of that setting item.
Important
• Do not open multiple setting pages at one time and try to
change the settings of a single camera.
• Do not use the [Back] or [Forward] buttons in the web
browser to navigate between setting pages. The changed
settings may return to the original settings or unwanted
setting changes may be applied.
38
Administrator Password
(1) [Password]
Set the administrator password. Up to 15 (single-byte)
ASCII characters (space or printable characters) can
be used. If the Admin Viewer, Admin Tools, etc., are
connected, terminate the connection before changing
the password.
(2) [Confirm Password]
Enter the same password as above for confirmation.
LAN
(1) [LAN Interface]
Select [Auto], [Full Duplex] or [Half Duplex]. Normally
[Auto] is used.
(2) [Maximum Packet Size]
Enter the maximum transmission unit. Normally there
is no need to change the default setting of 1500.
Note
When using ADSL, setting the maximum packet size to a slightly
lower value may increase sending efficiency.
IPv4
(1) [IPv4 Address Setting Method]
Select [Manual] or [Auto (DHCP)] in the address
setting method. If [Manual] is selected, directly enter
the values according to the environment in which the
camera is used. If [Auto (DHCP)] is selected, the value
automatically acquired from the DHCP server will be
entered in [IPv4 Address], [Subnet Mask] and [IPv4
Default Gateway Address].
(2) [IPv4 Address]
If [Manual] is specified in (1), enter a fixed IP address.
(3) [Subnet Mask]
If [Manual] is specified in (1), enter the designated
subnet mask values for each network.
(4) [IPv4 Default Gateway Address]
Enter an appropriate value if [Manual] is specified in
(1). Be sure to set when connecting the camera to a
different subnet from that of the viewer.
[Network]
Setting Administrator Password, LAN, IP Address, DNS, etc
The following can be set here.
• Administrator Password
Set the administrator password.
•LAN
Set the IP address and other items needed to
establish a LAN connection.
•IPv4
Set IPv4 address.
•IPv6
Set IPv6 address.
•DNS
Set the name server address, host name and
DDNS registration.
•mDNS
This will configure settings for using multicast
DNS.
•SNMP
Configure the necessary settings to use SNMP.
Important
• To ensure system security, register a strong administrator
password that cannot be easily guessed by a third party. Do
not forget the password.
• Press the reset switch to restore factory default settings if you
have forgotten the administrator password (p. 165). Note,
however, that this will reset all camera settings to factory
default settings except for date and time.
• [Administrator Password] and [Access Control] >
[Administrator Password] (p. 62) are the same. If you set one
[Administrator Password], the setting will be reflected in the
other [Administrator Password].
Important
• The camera may become inaccessible from the active web
browser if [LAN Interface] or [Maximum Packet Size] settings
are changed. Check beforehand the precautions in
“Important” in “[Reboot Item] Setting Items Requiring
Rebooting” (p. 74).
• Set [Maximum Packet Size] to 1280 or greater if using IPv6.
[Network] Setting Administrator Password, LAN, IP Address, DNS, etc
39
Setting Page
3
(5) [AutoIP]
Set AutoIP to [Disable] or [Enable].
(6) [IPv4 Address (AutoIP)]
When [Enable] is selected in (5), an automatically set
IP address is displayed.
IPv6
(1) [IPv6]
Set IPv6 use to [Disable] or [Enable].
(2) [Auto (RA)]
Select [Enable] to set an address automatically using
RA (Router Advertisement, network information
automatically transmitted from a router), or select
[Disable] not to set an address automatically.
(3) [Auto (DHCPv6)]
Select [Enable] to use DHCPv6 to set an address
automatically or [Disable] not to set an address
automatically.
(4) [IPv6 Address (Manual)]
Enter a fixed IPv6 address.
(5) [Prefix Length]
Enter a prefix length from 16 to 128 if [Disable] is
specified in (2).
(6) [IPv6 Default Gateway Address]
Enter a default gateway address if [Disable] is
specified in (2). Be sure to set when connecting the
camera to a different subnet from that of the viewer.
(7) [IPv6 Address (Auto)]
If [Enable] is specified in (1) and [Enable] is specified
in (2) and (3), then the automatically acquired address
will be shown.
Note
In an environment where IPv6 cannot be used, if IPv6 is set to
[Enable] and auto is set to [Enable], then the [IPv6 Address
(Auto)] field will display the link-local address only.
DNS
(1) [Name Server Address 1], [Name Server Address 2]
Enter the name server address you want to register.
To register only one address, keep the [Name Server
Address 2] field blank.
(2) [Auto-Setting of Name Server Address]
Select the method for setting the name server address
automatically using DHCP. Select [Use DHCP] to use
a name server address obtained automatically from
the DHCP server. Select [Use DHCPv6] to use a name
server address obtained automatically from the
DHCPv6 server. Select [Use DHCP/DHCPv6] to use a
name server address obtained automatically from the
DHCP server or DHCPv6 server. Select [Disable] if not
using DHCP.
To set [Use DHCP], select [Auto (DHCP)] in [IPv4
Address Setting Method].
To set [Use DHCPv6], select [Enable] in [IPv6], then
select [Enable] in [Auto (DHCPv6)].
Important
• Contact your System Administrator for the [IPv4 Address],
[Subnet Mask] and [IPv4 Default Gateway Address].
• The camera's IP address cannot be set to an IP address that
starts with 127., such as 127.0.0.1.
• If any of the [IPv4 Address], [Subnet Mask] or [IPv4 Default
Gateway Address] settings are wrong, network access may
be disabled. In this case, use Camera Management Tool to
set the address again.
• The camera may become inaccessible from the active web
browser if settings are changed in [IPv4 Address], [Subnet
Mask] or [IPv4 Default Gateway Address]. Check beforehand
the precautions in “Important” in “[Reboot Item] Setting Items
Requiring Rebooting” (p. 74).
• If [Auto (DHCP)] is selected as the IPv4 address setting
mode, the IPv4 address may not be assigned correctly in
certain environments, such as when a router is present
between the DHCP server and the camera. In this case,
assign a fixed IPv4 address from the [Manual] settings.
Important
• Contact your System Administrator for the [IPv6 Address
(Manual)], [Prefix Length] and [IPv6 Default Gateway
Address].
• The camera may become inaccessible from the active web
browser if settings are changed in [IPv6], [IPv6 Address
(Manual)], [Prefix Length] or [IPv6 Default Gateway Address].
Check beforehand the precautions in “Important” in “[Reboot
Item] Setting Items Requiring Rebooting” (p. 74).
40
(3) [Name Server Address (DHCP)]
Select [Use DHCP] or [Use DHCP/DHCPv6] in [Auto-
Setting of Name Server Address] to display the name
server address acquired from the DHCP server.
(4) [Name Server Address (DHCPv6)]
Select [Use DHCPv6] or [Use DHCP/DHCPv6] in [Auto-
Setting of Name Server Address] to display the name
server address acquired from the DHCPv6 server.
(5) [Host Name]
You can register the host name of the camera in the
name server.
Characters A to Z, a to z, 0 to 9, “-” (hyphen), “_”
(underscore) and “.” (period) may be used up to 63
(single-byte) characters in length.
(6) [Host Name Registration with DDNS]
Select [Enable] to register the entered name server
address and host name of the camera.
(7) [Search Domain]
Specify the host name, without specifying a domain
name, for a server, such as the upload server, to search
domains in the form “host name + domain name”,
where the domain names are specified in the server
domain list. Enter a domain name and click [Add] to
add the domain name to the search domain list.
(8) [Search Domain List]
A list of domain names added using [Search Domain]
appears. The function queries DNS server for each
domain name starting from the top of the list.
Use the ▲▼ buttons on the right to change the order
of the domain names.
To delete a domain name, select one from the list and
then click [Delete].
Note
• Use [Host Name Registration with DDNS] if the camera IP
Address Setting Method is [Auto (DHCP)] (p. 38). DNS server
registration settings must be set in advance. Contact your
System Administrator for the DNS server settings.
• If the name server address 1 is unavailable, the name server
address 2 will be accessed. However, the name server
address 2 must be set in advance.
mDNS
(1) [Use mDNS]
Set mDNS to [Disable] or [Enable]. If you use mDNS,
the IP address and host name of the camera will be
broadcast to other hosts on the network.
SNMP
(1) [Use SNMP v1 and v2c]
Set SNMPv1, v2c use to [Disable] or [Enable].
Camera information can be referenced by the SNMP
Manager if [Enable] is specified and SNMPv1 or v2c
is used.
(2) [Use SNMP v3]
Set SNMPv3 to [Disable] or [Enable]. Camera
information can be referenced by the SNMP Manager
if [Enable] is specified and SNMPv3 is used.
(3) [Administrator Contact Information]
Set contact information (e-mail address, etc.) for the
Administrator of the camera. Setting information can
be referenced by the SNMP manager.
(4) [Administration Function Name]
Set the camera name used for administration. Setting
information can be referenced by the SNMP manager.
If left blank, the following will be used by default:
VB-S30D
VB-S31D
VB-S800D or VB-S805D
VB-S900F or VB-S905F
(5) [Installation Location]
Set information regarding the installation location of
this camera. Setting information can be referenced by
the SNMP manager.
SNMP v1 and v2c Server
(1) [Community Name]
When [Enable] is selected in [SNMPv1, v2c], enter a
community name to be used for SNMPv1 and v2c.
The default setting is blank.
Important
Do not use “_” (underscore) in [Host Name] and [Search
Domain] in Internet Explorer 8/9/10/11.
[Network] Setting Administrator Password, LAN, IP Address, DNS, etc
41
Setting Page
3
SNMPv3 Server
(1) [User Name]
When [Enable] is selected in [SNMPv3], set the user
name for using SNMPv3.
(2) [Security Level]
Select [No authentication and no encryption],
[Authentication but no encryption] or [Authentication
and encryption] for the SNMPv3 security level.
(3) [Authentication Algorithm]
When [Authentication but no encryption] or
[Authentication and encryption] is selected for
[Security Level], select [MD5] or [SHA1] for the
authentication algorithm.
(4) [Authentication Password]
When [Authentication but no encryption] or
[Authentication and encryption] is selected for
[Security Level], set the authentication password.
(5) [Encryption Algorithm]
When [Authentication and encryption] is selected for
[Security Level], select [DES] or [AES] for the
encryption algorithm.
(6) [Encryption Password]
When [Authentication and encryption] is selected for
[Security Level], set the encryption password.
Note
• The information set in the camera is read-only from the SNMP
manager.
• Use the SNMP Manager that supports SNMP MIB2 (supporting
RFC1213).
42
Current Date and Time
[Date], [Time]
The date and time currently set in the camera are
shown.
Setting
(1) [Setting Method]
Select from [Set manually], [Synchronize with NTP
server], [Synchronize with NTP broadcast],
[Synchronize with computer time].
(2) [Date], [Time]
When [Setting Method] is set to [Set manually], you
can set the date and time manually. The date is
entered in year/month/day format, and the time in
hour:minute:second 24-hour format.
(3) [Auto-Setting of NTP Server]
When [Setting Method] is set to [Synchronize with
NTP server], select a DHCP option for the automatic
setting method of the NTP server.
[Disable]
Select when specifying an arbitrary NTP server.
Enter the IP address or host name of the NTP server
used in [NTP Server].
[Use DHCP]
The camera time is synchronized with the time of the
NTP server at the address acquired from the DHCP
server. In order to set [Use DHCP], you must
change [Network] > [IPv4 Address Setting Method]
to [Auto (DHCP)] (p. 38).
The NTP server address acquired from the DHCP
server will appear in [NTP Server (DHCP)].
[Use DHCPv6]
The camera time is synchronized with the time of the
NTP server at the address acquired from the
DHCPv6 server. In order to set [Use DHCPv6], you
must change [Network] > [IPv6] to [Enable], then set
[Auto (DHCPv6)] to [Enable] (p. 39).
The NTP server address acquired from the DHCPv6
server will appear in [NTP Server (DHCPv6)].
[Use DHCP/DHCPv6]
The camera time is synchronized with the time of the
NTP server at the address acquired from the DHCP
server or DHCPv6 server. If the NTP server address
can be acquired from both the DHCP server (IPv4)
and DHCPv6 server, the NTP server address
acquired from the DHCP server (IPv4) will be used.
[Synchronize with NTP broadcast]
The camera will synchronize with the NTP server
time. The camera will synchronize time with NTP
broadcasts received from the NTP server.
[Synchronize with computer time]
The camera will synchronize with the date and time
of the computer currently accessing the camera.
The [Time Zone] is not selected automatically, and
must be set separately as required.
(4) [Time Zone]
Select from the list the appropriate time difference
from the Greenwich Mean Time.
(5) [Daylight Saving Time]
Select [Enable] to automatically adjust the daylight
saving time according to the time zone or [Disable]
not to automatically adjust the daylight saving time.
[Date and Time] Setting Date and Time
The following can be set here.
• Current Date and Time
The date and time set in the camera is shown.
•Setting
Select the date and time setting method, time
zone and daylight saving time for the camera.
[Date and Time] Setting Date and Time
43
Setting Page
3
Note
• If [Synchronize with computer time] is selected, after clicking
[Apply], [Setting Method] will change to [Set manually].
• If [Synchronize with NTP server] is selected and the IP address
of the NTP server is incorrect or a connection with the NTP
server cannot otherwise be established, the date and time will
not be changed.
• The NTP server query interval is 300 seconds. Synchronization
will take time if the time difference is large.
• The camera's NTP broadcast mode does not support IPv6.
• If the [Time Zone] setting is changed, the date and time
display will update automatically according to the specified
time zone.
44
Camera Name
[Camera Name]
Be sure to enter [Camera Name (alphanumeric
characters)].
Up to 15 ASCII characters (spaces and printable
characters) may be used for [Camera Name
(alphanumeric characters)].
Note
• The camera name set here will be shown when the camera is
registered for use with RM Viewer.
Initial Camera Settings
(1) [AE Mode], [Slow Shutter], [Shutter Speed]
Set the exposure control and shutter speed for the
camera startup.
[AE Mode]
[Auto]
The exposure is controlled automatically.
[Auto (Flickerless)]
In this mode, video flickers caused by fluorescent
lights, etc., can be reduced. The shutter speed is
automatically adjusted according to the brightness
of the environment in which the camera is used.
[Auto (Flickerless 2)]
Use this mode if flickering is not reduced when
[Auto (Flickerless)] is selected. However, the
automatic adjustment range for the shutter speed is
suppressed so as not to exceed 1/100 sec. in this
mode, resulting in improper exposure (i.e.,
excessive brightness) in some cases.
[Auto (Shutter-priority AE)]
In this mode, a desired shutter speed can be
specified.
[Slow Shutter]
Slow shutter can be used only if [Auto], [Auto
(Flickerless)] or [Auto (Flickerless 2)] is selected in
[AE Mode].
Set the maximum slow shutter time to be used when
in auto exposure mode when capturing video in a
dark place. Select [Disable], [1/15], [1/8], [1/4] or
[1/2]. As slower shutter speed generates residual
video when capturing a moving subject, select an
appropriate time according to the capture conditions.
[Shutter Speed]
Shutter speed can be used only if [Auto (Shutter-priority
AE)] is selected in [AE Mode].
Select a desired shutter speed from the 16 levels from
[1/2] to [1/16000]. When capturing a moving subject,
selecting a higher shutter speed can reduce blurry video
capture.
(2) [Exposure Compensation]
The exposure compensation when the camera starts
can be set in the range of [-4 (Dark)] to [4 (Bright)]. To
brighten the video, set a positive value. To darken the
video, set a negative value.
The setting is not available if [Smart Shade Control] is
set to [Auto].
(3) [Metering Mode]
Set the metering mode when the camera starts.
[Camera] Setting Initial Camera Settings and External Device Name
The following can be set here.
• Camera Name
Enter the name of the camera. The camera name
is required for use with RM-Lite.
•Initial Camera Settings
Sets shooting settings at camera start up.
• Camera Control
Set the digital zoom, AGC limit, and smart shade
control strength.
• Day/Night
Set the day/night switching mode.
• Installation Conditions
Sets installation conditions, such as LED settings.
• Camera Position Control
Set whether or not to limit the pan, tilt and zoom
operations to the preset positions. Also, set the
camera position when nobody has control
privileges.
• External Device Name
Set the external input device name and external
output device name.
[Camera] Setting Initial Camera Settings and External Device Name
45
Setting Page
3
[Center-Weighted]
The entire screen is metered by focusing on the
center of the screen.
Even when slightly darker/brighter areas are present
on the periphery of the screen, an appropriate
exposure can be achieved for the subject near the
center.
Use this mode if the subject is positioned near the
center of the screen.
[Average]
The entire screen is metered by averaging.
A stable exposure can be achieved even in a
capture environment where there are notable
brightness differences within the screen.
Use this mode to stabilize the exposure in locations
where vehicles or people are moving.
[Spot]
The center of the screen is metered.
An appropriate exposure can be achieved for the
subject at the center of the screen regardless of the
brightness/darkness on the periphery of the screen.
Use this mode if you want to adjust the exposure to
the center of the screen because the subject is
receiving a spotlight or backlight, etc.
(4) [Focus Mode]
Set the focus mode when camera starts.
[Auto]
Automatically brings the subject into focus. Normally
[Auto] is selected.
[Fixed at infinity]
The focus can be fixed to near infinity.
(5) [Smart Shade Control]
Set the smart shade control strength when the camera
starts.
[Disable]
The smart shade control function is not used.
[Manual]
Set the smart shade control strength. Select a
strength from [1 (Mild)] to [7 (Strong)] in [Smart
Shade Control Level].
[Auto]
Combines the smart shade control function and the
exposure compensation function to automatically
adjust the video so that there are no blown out
highlights or blocked up shadows. Accordingly,
when [Auto] is selected, [Smart Shade Control
Level] and [Exposure Compensation] are not
displayed.
(6) [White Balance]
Select the white balance according to the light source
to achieve natural color in the video.
[Auto]
The white balance is adjusted automatically.
[Manual]
Set the values of red and blue gain according to the
light source. Enter a value from 0 to 1023 for both
the [R Gain] and [B Gain].
[Daylight Fluorescent]
Select this option to capture video under daylight
fluorescent lighting.
[White Fluorescent]
Select this option to capture video under daylight
fluorescent or white fluorescent lighting.
[Warm Fluorescent]
Select this option to capture video under warm
fluorescent lighting.
[Mercury Lamp]
Select this option to capture video under mercury
lamps.
[Sodium Lamp]
Select this option to capture video under orange
sodium lamps.
[Halogen Lamp]
Select this option to capture video under halogen
lamps or incandescent bulbs.
(7) [Noise Reduction]
Select a level from [Mild], [Standard], or [Strong] for
the noise reduction setting.
Principally, this setting is more effective in low-light
conditions. When set to [Strong], the noise reduction
effect is increased, but the afterimage of moving
subjects becomes easier to see. When set to [Mild],
the noise reduction effect is decreased and resolution
is increased, but the video file size becomes larger.
(8) [Sharpness]
Select a level from [1 (Mild)] to [7 (Strong)] for the
sharpness setting.
When set to [Strong] the video becomes sharper, and
when set to [Mild] the video becomes softer. Also,
when set to [Strong] the video file size becomes
larger.
(9) [Color Saturation]
Select a level from [1 (Light)] to [7 (Dark)] for the color
saturation setting.
(10)[Haze Compensation]
If the subject is obscured by haze, this adjusts
contrast in the video to improve subject visibility.
[Disable]
Disables haze compensation.
[Manual]
Set the haze compensation strength. Select a
strength from [1 (Mild)] to [7 (Strong)] in [Haze
Compensation].
46
[Auto]
Automatically uses haze compensation.
(11)[Day/Night]
Set Day/Night mode to [Auto], [Day Mode] or [Night
Mode] when the camera starts.
You can also switch between [Day Mode] and [Night
Mode] using the Day/Night mode function of the
Admin Viewer (p. 142).
Note
• Focusing may be difficult for the following types of subjects
when [Focus] is set to [Auto] or [One-shot AF].
Subjects Difficult to Focus On
• After rebooting the camera, it is recommended that you check
whether the camera is focusing correctly.
• The focus ranges (approximate) are shown in the table below.
Camera Control
(1) [Digital Zoom]
Set digital zoom to [Disable] or [Enable].
The higher the digital zoom ratio, the lower the video
quality becomes.
(2) [AGC Limit]
Select one of 5 levels from 1 to 5 to automatically set
the upper gain limit. The greater the value, the higher
the sensitivity becomes. If you do not want to use the
automatic gain adjustment, select [OFF]. Setting
[AGC Limit] allows you to reduce noise when
capturing video in low illumination.
(3) [Smart Shade Control Strength (Auto)]
Select [Mild], [Medium], or [Strong] for the control
strength when [Smart Shade Control] (p. 45) is set to
[Auto].
Important
• The initial camera settings (1) to (11) define the defaults that
apply when the camera is started. Setting changes will be
reflected only after the camera is reconnected or rebooted.
Specify the settings used in the actual operating environment
from the Admin Viewer (p. 139).
• If the subject is a traffic signal or electronic scoreboard, etc.,
the captured video may flicker.
In this case, try changing the [AE Mode] setting to [Auto
(Shutter-priority AE)] and selecting a shutter speed lower
than 1/100 to see if the problem improves.
• Even if [AE Mode] is set to [Auto (Flickerless)] or [Auto
(Flickerless 2)], some screen flicker may still occur under
unstable light source conditions.
• Setting a slow shutter speed may make it impossible for
intelligent functions to work correctly. Select a shutter speed
that suits the capture conditions and purpose.
• In conditions where an outdoor scene is captured
from an indoor location through a glass window, the camera
may focus on the glass surface if there is dust or water there.
Install the camera at the shortest possible distance from the
glass surface.
• [Smart Shade Control] cannot be used if [Haze
Compensation] is set to [Auto] or [Manual].
• [Haze Compensation] cannot be used if [Smart Shade
Control] is set to [Auto] or [Manual].
• If [Auto] is selected for [Day/Night], conduct a thorough
operation test to check the effectiveness of the setting
beforehand.
• If [Auto] is selected for [Day/Night], set [Exposure] of the
Admin Viewer to [Auto], [Auto (Flickerless)], [Auto
(Flickerless 2)] or [Auto (Shutter-priority AE)] (p. 141).
However, when [Auto (Shutter-priority AE)] is being used,
night mode may not be activated even if [Day/Night] is set to
[Auto], depending on the shutter speed.
• Though the camera has an infrared filter, there is no effect on
lighting due to infrared light as the camera does not have an
insertion/removal mechanism for the filter.
• The Day/Night Mode can be switched manually via the Day/
Night function of the Admin Viewer (p. 142), or via the
[External Device Input] (p. 59) or [Timer] (p. 60) settings in
[Setting Page] > [Event].
A white wall or other
subject lacking
bright/dark contrast
A slanting
subject
A subject
reflecting
strong light
A subject consisting
of only slanted lines
or horizontal stripes
A subject having
no form, such as
flame or smoke
A subject seen
through glass
A fast moving
subject
A dark area or
night view
Subjects both
near and far
Focus Mode
Fixed at infinity
Auto
Day Mode/Night Mode
0.3 m (12 in.) – infinity 0.3 m (12 in.) – infinity
Max. Wide-angle Max. Telephoto
Focused at infinity
[Camera] Setting Initial Camera Settings and External Device Name
47
Setting Page
3
(4) [Haze Compensation Strength (Auto)]
Select [Mild], [Medium], or [Strong] for the haze
compensation strength when [Haze Compensation]
(p. 45) is set to [Auto].
When [Haze Compensation] is set to [Auto] and [Haze
Compensation Strength (Auto)] is set to [Strong],
contrast may be strong if the subject is not obscured
by haze. If this happens, set [Haze Compensation
Strength (Auto)] to [Mild].
(5) [Pan/Tilt Speed Control]
Select [Control at set speed] or [Control by zoom
position] for the pan/tilt control mode.
If [Control by zoom position] is selected, the pan/tilt
speed will be slower in the telephoto zoom range, and
faster in wide-angle zoom range.
Note
• [Pan/Tilt Speed Control] can also be set in [Control for Admin]
> [Pan/Tilt] (p. 139).
• If [Control by zoom position] is selected, [Control for Admin] >
[Pan/Tilt] will also be fixed at [Control speed by zoom position].
Day/Night (when Auto is set)
(1) [Switching Brightness]
Set the brightness at which Day Mode and Night
Mode will be switched when [Auto] is selected in
[Day/Night]. Select [Darker], [Slightly Darker],
[Standard], [Slightly Brighter] or [Brighter]. Select
[Darker] if you want to capture video in color as much
as possible.
Select [Brighter] to reduce noise. Note that this mode
switches to black & white sooner.
(2) [Response (sec.)]
Set the time in seconds needed for judgment on
switching between Day Mode and Night Mode when
[Auto] is selected in [Day/Night]. Select [60], [30],
[20], [10] or [5].
The mode will switch between Day Mode and Night
Mode if brightness remains above or below the level
set in (1) for the number of seconds specified.
Select [30] or [60] if brightness changes frequently,
such as when a light source passes in front of the
camera. Select [5] or [10] if change in brightness is
minimal.
Installation Conditions
(1) [LED Setting]
Select [Turn Off] or [Turn On] for the LED operation
status on the camera. Set to [Turn Off] if you do not
want to turn on the LED.
(2) [Image Flip]
Select [Disable] or [Enable] for the orientation of the
camera video.
Note
The LED will light for several seconds when booting even if the
[LED Setting] is set to [Turn Off].
Camera Position Control
(1) [Restricted to Presets]
Set the camera control preset to [No Restriction] or
[Preset Only]. The administrator can limit camera
control by non-administrators to preset angles by
selecting [Preset Only].
(2) [Camera Position without Control]
Select either [Do not return to Home Position] or
[Return to Home Position] as the action when no
control privileges are requested by users and the
home position has already been set.
When [Return to Home Position] is selected and no
users have control privileges, the camera moves
automatically to the home position. This function
requires the home position of the camera be set in
advance. Set the home position using Preset Setting
Tool (p. 94).
External Input Device / External Output Device
[Device Name] for external input device/external output
device
Be sure to enter each device name in order to identify
the corresponding external device being connected.
Enter [Device Name (alphanumeric characters)] using
up to 15 characters (ASCII characters (space or
printable characters) excluding the double quotation
mark (“)).
Note
The external device name set here will be shown when the Admin
Viewer or included RM-Lite is used.
Important
• [AGC Limit] is disabled when [Exposure] is set to [Manual],
[Auto (Flickerless)], or [Auto (Flickerless 2)] in the Admin
Viewer.
• Minimum subject illumination may change when [AGC Limit]
is set.
48
All Videos
(1) [Video Size Set]
Select the set of video sizes used by the camera from
[1920 x 1080 / 960 x 540 / 480 x 270],
[1280 x 720 / 640
x 360 / 320 x 180], or [1280 x 960 / 640 x 480 / 320 x 240].
Select from [1280 x 720 / 640 x 360 / 320 x 180] or
[1280 x 960 / 640 x 480 / 320 x 240] for the VB-S805D
and VB-S905F.
All options in the [Video] menu and the size set that can
be selected in [Video Size] are determined by the set
selected here.
JPEG
(1) [Video Quality]
Select a desired video quality from 1 to 5 (5 levels) for
videos transmitted at each video size in JPEG.
Greater values have higher quality.
(2) [Video Quality: Digital PTZ]
Select a desired video quality from 1 to 5 (5 levels) for
Digital PTZ.
Greater values have higher quality.
(3) [Video Size: video Transmission]
Select the size of the transmitted video. The video
sizes that can be selected depend on the [Video Size
Set] setting. This becomes the start-up video size
used by each viewer if no video size has been set.
(4) [Maximum Frame Rate: Video Transmission]
Limit the maximum transmission frame rate per
second to reduce the viewer load. The maximum is 30
frames/sec. Enter a value of between 0.1 and 30.0.
(5) [Video Size: Upload / Memory card]
Select the size of video when using the upload
function (p. 53) or when recording to a memory card
(p. 71). The video sizes that can be selected depend
on the [Video Size Set] setting. Use [Event] > [Video
Record Action] (p. 58) to specify the destination of a
video recording (upload or memory card recording).
H.264(1)
Configure settings using H.264(1) when using H.264
video for upload or memory card recording. H.264(2)
video cannot be used for upload or memory card
recording.
H.264(1) video can be displayed using Admin Viewer and
RM-Lite Viewer. It cannot be displayed using VB Viewer.
(1) [Video Size]
Select the size of the transmitted video. The video
sizes that can be selected depend on the [Video Size
Set] setting.
[Video] Setting Video Size, Quality and Frame Rate
The following can be set here.
• All Videos
Specify the set of video sizes used by the camera.
• JPEG
Set the video quality, size, maximum frame rate
and upload size in JPEG.
•H.264
Set the bit rate, video size and capture frame rate
in H.264.
• On-screen display
Set time, character string, etc. displayed over
video.
[Video Size Set] Category Aspect ratio
[1920 x 1080 / 960 x 540 /
480 x 270] 1080p 16:9
[1280 x 720 / 640 x 360 /
320 x 180] 720p 16:9
[1280 x 960 / 640 x 480 /
320 x 240] 4:3 4:3
Important
• Changing the [Video Size Set] setting will disconnect all
connections and then change all the video sizes.
Consequently, users connected to the camera must
reconnect.
• If the [Video Size Set] selection is changed and you click
[Apply and Reboot], review the following settings and check
the operation.
- Privacy mask settings
- View restriction settings
-Preset settings
- Intelligent function settings
- Camera Angle
• [1920 x 1080 / 960 x 540 / 480 x 270] cannot be selected for
the VB-S805D and VB-S905F.
[Video] Setting Video Size, Quality and Frame Rate
49
Setting Page
3
(2) [Bit Rate Control]
Select [Do not use bit rate control] or [Use bit rate
control].
Select [Use bit rate control] when [Video Format]
under [Upload] is set to [H.264(1)] or when [Video
Format] under [Memory Card] is set to [H.264(1)].
(3) [Target Bit Rate (kbps)]
If [Use bit rate control] is selected in (2), select a
desired target bit rate from the 17 levels from [64] to
[16384].
(4) [Video Quality]
If [Do not use bit rate control] is selected in (2), select
a desired quality from 1 to 5 (total 5 levels) for H.264
video transmission.
Greater values have higher quality.
(5) [Frame Rate (fps)]
Select [30], [15], [10], [6], [5], [3], [2] or [1] (fps) for
the frame rate of video transmitted.
(6) [I Frame Interval (sec)]
Select [0.5], [1], [1.5], [2], [3], [4] or [5] for the I frame
interval (sec) for H.264 video.
H.264(2)
(1) [H.264(2)]
Select [Enable] to distribute H.264 video using two
streams.
H.264(2) video can be displayed using Admin Viewer
and RM-Lite Viewer. It cannot be used for upload,
memory card recording, or by VB Viewer.
Refer to the settings for “H.264(1)” for details about
[Video Size], [Bit Rate Control], [Target Bit Rate
(kbps)], [Video Quality], [Frame Rate (fps)], and [I
Frame Interval (sec)] settings.
On-screen display
(1) [Date display]
Select whether to enable date display over video. If
[Enable] is selected, date information will be
displayed over video.
(2) [Position of date display]
Select [Upper left], [Upper right], [Lower left] or
[Lower right] for the position of date display
information.
(3) [Format of date display]
Select [YYYY/MM/DD], [DD/MM/YYYY] or [MM/DD/
YYYY] for the format of the date display.
Important
When streaming two H.264 videos, setting the video size
settings for H.264(1) and H.264(2) to the following
combinations restricts the frame rate to a maximum of 15 fps.
For all other combinations, a frame rate of up to 30 fps can be
selected.
H.264(1) H.264(2)
1920 x 1080 All sizes
All sizes 1920 x 1080
1280 x 960 1280 x 960
1280 x 720 1280 X 720
Important
• When [H.264(1)] is selected for the memory card recording
and upload settings, the following restrictions apply to the
[H.264(1)] setting.
- Only [Use bit rate control] can be selected for [Bit Rate
Control].
- Only [3072] or less can be selected for [Target Bit Rate
(kbps)].
- Only one of [0.5], [1], and [1.5] can be selected for [I
Frame Interval (sec)].
• Network load will increase if a larger video size is set or
higher video quality and target bit rate are set, as this
increases data size per frame. As a result, the following could
occur:
JPEG: The frame rate may drop
H.264: Video may be temporarily disrupted
• Block noise may become noticeable if a large video size and
low target bit rate are set.
• The data size may increase depending on the type or
movement of the subject. If the frame rate remains low or
other undesirable conditions continue for a prolonged
period, lower the video size or quality setting.
• The included RM-Lite cannot record H.264 video.
• H.264 video can be displayed using Admin Viewer and RM-
Lite Viewer. H.264 video cannot be displayed using VB
Viewer.
50
(4) [Time display]
Select whether to enable time display over video. If
[Enable] is selected, display time information will be
displayed over video.
(5) [Position of time display]
Select [Upper left], [Upper right], [Lower left] or
[Lower right] for the position of time display
information.
(6) [Text display]
Select [Display nothing], [Display designated string]
or [Display camera name] for the text string to display
over video.
If [Display designated string] is selected, the [Text
string display] set in (8) will be displayed.
If [Display camera name] is selected, the text string
set in [Camera Name (alphanumeric characters)]
under [Camera] will be shown (p. 44).
(7) [Position of text display]
Select the position of text display from [Upper left],
[Upper right], [Lower left] or [Lower right].
(8) [Text string display]
If [Display designated string] is selected in (6) [Text
display], you can enter a text string of up to 15 ASCII
characters (spaces and printable characters) for
superimposed display on the video.
(9) [Color of text]
Select [Black], [Blue], [Cyan], [Green], [Yellow],
[Red], [Magenta] or [White] for the color of text to be
displayed over the video.
(10)[Background color]
Select [Black], [Blue], [Cyan], [Green], [Yellow],
[Red], [Magenta] or [White] for the background color.
(11)[Color depth of text and background]
Select [Fill text and background color], [Make text
transparent], [Make background transparent], [Make
text semi-transparent] or [Make text and background
semi-transparent] for the color depth of text and
background to be displayed over the video.
Note
• Depending on video quality settings, on-screen display may
become difficult to decipher. Set after confirming appearance
on actual video.
• The on-screen display is not shown for cropped
images using digital PTZ with horizontal size of 384 pixels or
lower.
Important
The on-screen time display is not suitable for usage where high
reliability is required. Use as reference information only where
utmost and constant reliability is required for surveillance.
51
3
Setting Page
RTP Server
(1) [RTP]
Set RTP to [Disable] or [Enable].
(2) [RTSP Authentication Method]
Set the RTSP authentication method to [Basic
Authentication], [Digest Authentication], or [No
Authentication].
(3) [RTSP Port]
Set the RTSP port number to 554 or in the range of
1024 to 65535.
Normally [554] (factory default setting) is used.
Audio Multicast
(1) [Multicast Address]
Set the multicast address for audio transmission in the
range 224.0.0.0 to 239.255.255.255 (IPv4) or an
address beginning with ff00::/8 (IPv6).
To disable Multicast, set to [0.0.0.0] (IPv4) or [::0(::)]
(IPv6).
(2) [Multicast Port]
Set the multicast port number for audio transmission
to an even number in the range 1024 to 65534.
To disable Multicast, set to [0].
(3) [Multicast TTL]
Set the effective scope of multicast distribution
between 0 and 255.
To disable Multicast, set to [0].
The TTL (Time To Live), representing the effective
scope of multicast distribution, is decremented each
time the signal passes through a router. When the
value reaches 0, the signal can no longer be
distributed. For example, if TTL is set to [1], multicast
distribution is confined to the local segment only and
cannot be distributed by the router.
RTP Streaming 1 to 5
You can make settings for each stream, RTP Streaming 1
to RTP Streaming 5, in a 5-session RTP stream
distribution.
(1) [Video Size]
Select the video format (JPEG or H.264) and video
size of the RTP stream.
The video sizes for JPEG will vary depending on the
[Video Size Set] configured in [Video] > [All Videos]
(p. 48). The video sizes for H.264 will be determined
according to the [H.264(1)] and [H.264(2)] settings
configured in [Video].
In addition, [H.264(1)] and [H.264(2)] cannot be set
for multiple RTP streams.
(2) [Frame Rate]
Set the frame rate if the RTP stream is JPEG video.
For H.264, the frame rate is determined by the [Video]
> [H.264(1)] or [H.264(2)] > [Frame Rate] setting
(p. 49).
(3) [Multicast Address]
Set the multicast address for RTP streaming in the
range 224.0.0.0 to 239.255.255.255 (IPv4) or an
address beginning with ff00::/8 (IPv6).
To disable Multicast, set to [0.0.0.0] (IPv4) or [::0(::)]
(IPv6).
(4) [Multicast Port]
Set the multicast port number for RTP streaming to an
even number in the range 1024 to 65534.
To disable Multicast, set to [0].
(5) [Multicast TTL]
Set the effective scope of multicast distribution for
RTP streaming between 0 and 255.
To disable Multicast, set to [0].
The TTL (Time To Live), representing the effective
scope of multicast distribution, is decremented each
time the signal passes through a router. When the
value reaches 0, the signal can no longer be
distributed. For example, if TTL is set to [1], multicast
[RTP]
RTP Server, Audio Multicast and RTP Streaming
The following can be set here.
•RTP Server
Enable RTP, and set the RTSP authentication
method and port number.
• Audio Multicast
Make settings for multicast audio transmission.
•RTP Streaming 1 to 5
Make settings for RTP streaming of video,
multicasting, and audio transmission.
52
distribution is confined to the local segment only and
cannot be distributed by the router.
(6) [Audio Transmission]
Set RTP streaming audio transmission to [Disable] or
[Enable].
Note
• RTP stream URL
rtsp://IP_address:port_number/rtpstream/config1(~5)=r|u|m
[=r|u|m] is optional and can be omitted. If specified, specify
only one option.
r: Requests RTP over TCP
u: Requests RTP over UDP
m: Requests multicast
Example: RTP streaming 1 request using RTP over TCP
rtsp://192.168.100.1:554/rtpstream/config1=r
Note that the actual operation is dependent on the RTP client
application, so the URL does not necessarily specify the
method used for transmission.
• For H.264, the bit rate control and video quality are determined
by the settings in [Video] (p. 49).
• Regardless of the [Server] > [Audio Server] > [Audio
Transmission from the Camera] setting, RTP streaming audio
will be used.
However, to use audio settings, select [Enable] for [Audio
Transmission from the Camera] and make the settings.
• The [Access Control] > [User Authority] > [Video Distribution]
and [Audio Distribution] settings are not used for RTP.
• RTP streaming video may not be viewable on systems using a
proxy server or firewall. If the video cannot be viewed, contact
the system administrator.
• If host access restrictions are applied to a client while it is
streaming using RTP over UDP, it may take from a few to
several seconds until streaming ceases.
53
3
Setting Page
General Upload
(1) [Upload]
Select [Upload Disabled], [HTTP Upload] or [FTP
Upload] for the upload method.
(2) [Video Format]
Select the [JPEG] or [H.264(1)] format for video you
want to upload.
If [H.264(1)] is selected, video is uploaded with the
settings defined under [Video] > [H.264(1)] (p. 48).
[H.264(2)] cannot be used.
(3) [Frame Rate]
Enter the maximum frame rate of video to be
uploaded. This setting can only be made when
[JPEG] is selected for [Video Format].
(4) [Pre-event Buffer (number of frames)] / [Pre-event
Buffer (sec)]
Enter the number of frames or seconds of video to be
buffered before the event. The maximum amount is
number of frames for a [JPEG] selection and number
of seconds for an [H.264(1)] selection in [Video
Format].
(5) [Post-event Buffer (number of frames)] / [Post-event
Buffer (sec)]
Enter the number of frames or seconds of video to be
buffered after the event. The maximum amount is
number of frames for a [JPEG] selection and number
of seconds for an [H.264(1)] selection in [Video
Format].
Note
The server or network load may increase and the frame rate may
drop, depending on the settings. If this occurs, try the following
measures. Also check the settings including the network to the
server.
• Reduce the video file size:
– Set a lower value under [Video Quality] for [JPEG]/
[H.264(1)] (p. 48).
– Set a lower value for [Video Size: Upload / Memory card] for
[JPEG] (p. 48).
– Set a lower value for [Video Size] for [H.264(1)] (p. 48).
– Set a lower value under [Target Bit Rate (kbps)] for
[H.264(1)] (p. 49).
• Reduce the uploading frequency:
– Reduce the value in [Pre-event Buffer] or [Post-event Buffer]
(p. 53).
– If [Volume Detection Event] is enabled, disabled [ON Event
Operation], [OFF Event Operation], or [Ongoing ON Event
Operation] (p. 58).
[Upload]
Setting HTTP/FTP Upload and E-mail Notification
The following can be set here.
• General Upload
Set the upload operation to be performed and the
video buffer.
• HTTP Upload
Set HTTP connection uploads.
• FTP Upload
Set FTP connection uploads.
• E-mail Notification
Set event information and video e-mail
notifications.
Important
• If the upload function is used, either the [Event] menu must
be set (p. 58) or the [Event] tab in the Intelligent Function
Setting Tool (p. 108) must be set.
• If you are using both e-mail notification by text and video and
video upload by HTTP/FTP, set [Video Size: Upload / Memory
card] (p. 48) to a small size.
• HTTP upload does not support SSL/TLS.
• If the camera is set to perform upload or e-mail notification
continuously, not all video or e-mails may be sent depending
on the video size and the network condition to the server. In
this case, an event log message is displayed (p. 75).
• If the destination for HTTP/FTP upload or e-mail notification is
set for a Windows operating system, IPsec communication
cannot be applied.
• When an H.264 video is uploaded, the following restrictions
apply to [H.264(1)] of [Video] (p. 48).
- Only [Use bit rate control] can be selected for [Bit Rate
Control].
- Only [3072] or less can be selected for [Target Bit Rate
(kbps)].
- Only one of [0.5], [1], and [1.5] can be selected for [I
Frame Interval (sec)].
• The maximum video buffer size capacity is approx. 5 MB.
If a large video size is set, the Frame Rate, Pre-event Buffer
and Post-event Buffer may not be achieved as specified.
• If buffering cannot be achieved as specified, a message is
written to the event log (p. 75).
Before using a large video size, confirm that no messages
appear in the event log.
54
– From the Intelligent Function Setting Tool [Event] tab >
disable [ON Event Operation], [OFF Event Operation] or
[Detected mode Operation] (p. 108).
– If [External Device Input Event] is enabled, disable [Active
Event Operation], [Inactive Event Operation], or [Ongoing
Active Event Operation] (p. 59).
– If [Timer Event] is enabled, increase the value in [Repeat
Interval] (p. 60).
HTTP Upload
The HTTP upload function sends notifications via HTTP or
via HTTP with attached videos, depending on the network
camera event.
(1) [Notification]
Select [Notification Only with HTTP] or [Video
attached Notification with HTTP] as the content of
notification.
(2) [URI]
Enter the URI to be uploaded to (using up to 255
characters).
(3) [User Name], [Password]
Enter the user name and password required for
authentication.
Digest authentication is not supported.
(4) [Proxy Server]
Enter the host name or IP address of the proxy server
(using up to 63 characters).
(5) [Proxy Port]
Enter the port number of the proxy server (factory
default setting is [80]).
(6) [Proxy User Name], [Proxy Password]
Enter the user name and password of the proxy
server.
Digest authentication is not supported.
(7) [Parameter (query string)]
Enter the parameter (using up to 127 characters).
Parameters can be specified using the “%” character
(p. 150).
(8) [HTTP Upload Test]
Clicking [Exec] initiates an upload test based on the
settings currently entered. Only one JPEG image is
uploaded. It is not necessary to click [Apply].
After entering a password, first click [Exec], then
[Apply] the password.
FTP Upload
(1) [Notification]
The content of notification is set to [Video data upload
with FTP].
(2) [FTP Server]
Enter the host name or IP address of the FTP server
(using up to 63 characters).
(3) [User Name], [Password]
Enter the user name and password required for
authentication.
(4) [PASV Mode]
Select [Disable] or [Enable] for the PASV mode when
uploading via FTP.
(5) [File Upload Path]
Enter the path to the folder where the video file is to be
uploaded to (using up to 255 characters).
(6) [File Naming]
Set a desired file naming rule.
[YYYYMMDDHHMMSSms]
Video is uploaded according to the file name format
of
“{year}{month}{day}{hour}{minute}{second}{ms}.jpg”.
(Example: 20150123112122000.jpg)
[YYYYMMDD Directory/HHMMSSms]
A subdirectory named “{year}{month}{day}” is
created first, and then the video is uploaded using
the file name “{hour}{minute}{second}{ms}.jpg”.
(Example: 20150123/112122000.jpg)
[Loop]
Video is loaded with a file name numbered up to the
value set in [Maximum Number of Loops].
(Example: 0000.jpg, 0001.jpg)
The number will return to 0000 when the maximum
number of loops is reached.
[Maximum Number of Loops]
If [Loop] is set under [File Naming], enter the
maximum number of loops in the range of 0 to 9999.
Important
• Enter [Proxy Server], [Proxy Port], [Proxy User Name] and
[Proxy Password] if connecting via a proxy.
• For information about the HTTP upload function and settings,
contact your nearest Canon Customer Service Center.
[Upload] Setting HTTP/FTP Upload and E-mail Notification
55
Setting Page
3
[User Setting]
Video is uploaded according to the file naming
method specified in [Subdirectory Name to Create]
and [File Name to Create].
[Subdirectory Name to Create], [File Name to
Create]
If file naming is set to [User Setting], enter the
subdirectory name to be created as well as the
name of the created file (using up to 127
characters). Parameters can be specified in the
entry with the “%” character (p. 150).
(7) [FTP Upload Test]
Clicking [Exec] initiates an upload test based on the
settings currently entered. Only one JPEG image is
uploaded. It is not necessary to click [Apply].
After entering a password, first click [Exec], then
[Apply] the password.
E-mail Notification
(1) [Notification]
Select [Text Only] or [Text with Image] as the content
of notification. If [Upload] is set to [Upload Disabled],
[Text with Image] will not be available.
(2) [Copy E-mail Settings]
Copy the mail settings used in [Maintenance] > [Log
Notifications] (p. 75).
(3) [Mail Server Name]
Enter the host name or IP address of the SMTP server
(using up to 63 characters).
(4) [Mail Server Port]
Enter the port number of the SMTP server (factory
default setting is [25]).
(5) [Sender (From)]
Set the e-mail address of the sender (using up to 63
characters).
(6) [Recipient (To)]
Set the e-mail address of the recipient (using up to 63
characters).
(7) [Authentication]
Select [None], [POP before SMTP] or [SMTP-AUTH]
for the e-mail authentication method.
Set an appropriate method according to the
authentication method used by the SMTP server to
send to.
[User Name], [Password], [POP Server]
If [POP before SMTP] is selected as the e-mail
authentication mode, enter the user name and
password as well as the host name or IP address of
the POP server required for authentication.
[User Name], [Password]
If [SMTP-AUTH] is selected as the e-mail
authentication method, enter the user name and
password required for authentication.
(8) [Subject]
Enter the subject of the e-mail to be sent using up to
31 ASCII characters.
(9) [Message Body]
Enter the message (text) of the e-mail to be sent using
up to 255 ASCII characters. Parameters can be
specified with the “%” character (p. 150).
(10)[E-mail Notification Test]
Clicking [Exec] initiates an e-mail notification test
based on the settings currently entered. It is not
necessary to click [Apply].
After entering a password, first click [Exec], then
[Apply] the password.
56
Video Server
(1) [Maximum Number of Clients]
Set the maximum number of clients that can be
connected to the camera at the same time. Up to 30
clients can be set.
If 0 is set, connection is prohibited except for the
Administrator.
(2) [Camera Control Queue Length]
Set the maximum queue length for clients requesting
camera control privilege from the viewer. The
maximum number is 30. Enter an integer from 0 to 30.
If 0 is set, camera control is prohibited except for the
Administrator.
(3) [Maximum Connection Time (sec.)]
Set the time in seconds during which an individual
client can connect to the camera. The maximum
number is 65535. Enter an integer from 0 to 65535. If 0
is set, the connection time becomes unlimited.
(4) [Camera Control Time (sec.)]
Enter the maximum time VB Viewer can retain camera
control privileges. The maximum number is 3600.
Enter an integer from 1 to 3600.
Audio Server
(1) [Audio Transmission from the Camera]
When [Enable] is selected, the audio input through the
microphone attached to the camera can be
transmitted to the Viewer.
(2) [Input Volume]
Set the volume of input for the microphone connected
to the camera in the range of 1 to 100. The greater the
value, the larger the input volume becomes.
(3) [Voice Activity Detection]
If [Enable] is selected, the audio transmission is
stopped temporarily when no audio is output. This
way, the load of the applicable network can be
reduced.
(4) [Audio Input]
Set the microphone input. Select [Line In],
[Microphone In (dynamic microphone)] or
[Microphone In (condenser microphone)].
[Server]
Setting the Video Server, Audio Server, HTTP Server, FTP Server and
WS-Security
The following can be set here.
• Video Server
Set the video transmission from the camera.
•Audio Server
Set the audio transmission from the camera.
•HTTP Server
Set the authentication method, and HTTP port
number.
•FTP Server
Configure settings for FTP server use.
•WS-Security
Configure settings for checking the time with WS-
Security.
Caution
Switch line in and microphone in on each setting page
according to the specification of the microphone.
Using the wrong input may damage the camera and/or
microphone. Be sure to configure settings correctly.
Important
• Video and audio can be distributed to up to 30 clients.
However, when there are many clients or they are connected
to the camera over an SSL connection, the video frame rate
may slow down and the sound may drop out if audio
reception from the camera is enabled.
• The volume, sound quality, etc., may change depending on
the characteristics of the microphone used.
• If the [Input Volume] settings are changed after setting volume
detection, check the detection setting again.
• The video and audio may not be synchronized.
• Audio Transmission
• Input Volume
• Voice Activity Detection
[Server] Setting the Video Server, Audio Server, HTTP Server, FTP Server and WS-Security
57
Setting Page
3
HTTP Server
(1) [Authentication Method]
Set the authentication method used with the HTTP
server to [Basic Authentication] or [Digest
Authentication].
(2) [HTTP Port]
Set the HTTP port number to 80 or in the range of
1024 to 65535.
Normally [80] (factory default setting) is used.
(3) [HTTPS Port]
Set the HTTPS port number to 443 or in the range of
1024 to 65535.
Normally [443] (factory default setting) is used.
FTP Server
(1) [Use FTP Server]
Set FTP Server to [Disable] or [Enable].
WS-Security
(1) [Check Time on Authentication]
Select whether to check the time information in data
sent from the client by selecting [Check] or [Do not
check].
• The audio may be temporarily interrupted, depending on the
performance of the computer and the network environment.
• The audio may be interrupted if anti-virus software is
enabled.
• Communication may be temporarily interrupted, cutting off
the audio, if the LAN cable is unplugged and plugged in
again. If this occurs, reconnect from the Viewer.
Important
If the setting of [HTTP Port] or [HTTPS Port] is changed, the
camera may become inaccessible from the active web
browser. Check beforehand the precautions in “Important” in
“[Reboot Item] Setting Items Requiring Rebooting” (p. 74).
58
Video Record Setting
(1) [Video Record Action]
Select the destination of a video recorded when an
event occurs. To record to a server selected on the
[Upload] in the setting page, select [Upload] and to
record to a memory card inserted in the camera,
select [Record to Memory Card].
Note
The size and format of video recorded according to the [Video
Record Action] settings are as follows:
Settings must be made in the above setting page to make
an actual video recording.
Volume Detection
(1) [Volume Detection Event]
Set volume detection to [Disable] or [Enable].
(2) [Detect Criteria]
Set the criteria for generating volume detection events
to [The reference volume level or above] or [The
reference volume level or below].
(3) [Reference Volume Level]
Set the reference volume level for detection in the
range of 1 to 100.
Set the reference volume level by performing an
actual test while checking [Current Volume Level]
before configuring the setting.
(4) [Current Volume Level]
The current volume level appears on the status bar.
The level set in [Reference Volume Level] is indicated
by a red mark.Volume below the reference level
appears in blue, that above the reference level
appears in red.
(5) [Detect Criteria Duration (sec)]
Set the duration of the detect criteria in the range of 0
to 10 (sec.). When the status meeting the detect
criteria has continued for the duration or longer, an
ON event is generated.
(6) [ON Event Operation]
Select the operation to be performed upon an ON
event. If [Enable] is selected, (9) [Preset], (10) [Video
Record] and (11) [E-mail Notification] will be executed
according to their settings upon an ON event.
(7) [OFF Event Operation]
Select the operation to be performed upon an OFF
event. If [Enable] is selected, (9) [Preset], (10) [Video
Record] and (11) [E-mail Notification] will be executed
according to their settings upon an OFF event.
[Event]
Setting Video Record, Volume Detection, External Device Output/Input and
Timer
The following can be set here.
• Video Record Setting
Set where video is recorded when an event
occurs.
• Volume Detection
Set the operation to be performed at the time of
volume detection.
• External Device Output
Set external device output.
• External Device Input
Set the operation to be performed when an event
is triggered by input from an external device.
•Timer
Set timer events.
Important
When using the upload function, or recording to the memory
card, do not change the settings in the [Setting Page]. Doing so
may result in the upload function or the recording to memory
card to stop.
[Video Record
Action] settings Applied video format Applied video size
[Upload] [Upload] > [Video
Format] settings
When the video format is
[JPEG], [Video] > [JPEG] >
[Video Size: Upload /
Memory card]
When the video format is
[H.264(1)], [Video] >
[H.264(1)] > [Video Size]
[Record to
Memory Card]
[Memory Card] >
[Video Format]
settings
[Event] Setting Video Record, Volume Detection, External Device Output/Input and Timer
59
Setting Page
3
(8) [Ongoing ON Event Operation]
Select the operation to be performed while a volume
detection event is in progress. This can be set when
[ON Event Operation] is set to [Enable].
If [Enable] is selected, (10) [Video Record] and
(11) [E-mail Notification] will be executed according to
their settings during the volume detection event.
(9) [Preset]
If a preset is specified, the camera will orient
automatically to the specified preset position when a
volume detection event occurs. To use presets, it is
necessary to set the presets with the Preset Setting
Tool under Admin Tools (p. 94). If there is no need for
additional camera operation, select [None].
(10)[Video Record]
Specify the video record action. If [Enable] is
selected, video will be transmitted to the destination
selected in [Video Record Action] (p. 58) when a
volume detection event occurs.
(11)[E-mail Notification]
Select the e-mail notification operation to be
performed. If [Enable] is selected, e-mail notification
is performed when a volume detection event occurs.
To use this function, [Upload] > [E-mail Notification]
must also be set (p. 55).
(12)[External Device Output for ON Event]
Select whether external device output is active or
inactive upon an ON event. Select [Disable] to disable
external device output.
(13)[External Device Output for OFF Event]
Select whether external device output is active or
inactive upon an OFF event. Select [Disable] to
disable external device output.
External Device Output
(1) [Operation Mode]
Select the normal (inactive) circuit condition.
When [Normally Open] is selected, the output
terminals remain in the open state during normal
operation, and the terminals close upon an active
event and open upon an inactive event.
When [Normally Close] is selected, the output
terminals remain in the closed state during normal
operation, and the terminals open upon an active
event and close upon an inactive event.
(2) [Active Output Format]
Select [Pulse] or [Continuous] for the external device
output format.
(3) [Pulse Output Time (sec)]
Enter the pulse output time in the range of 1 to 120
(sec.). This setting is available when [Active Output
Format] is [Pulse].
Note
[Normally Open] means that the contacts are normally in the
open state (that the circuit is non-conductive), and [Normally
Close] means that the contacts are normally in the closed state
(that the circuit is conductive).
External Device Input
(1) [External Device Input Event]
Set external device input events to [Disable] or
[Enable].
(2) [Operation Mode]
Select the circuit condition of the connected external
device.
When [Normally Open] is selected, an active event
occurs when the terminals of the external device
close, and an inactive event occurs when the
terminals open.
When [Normally Close] is selected, an active event
occurs when the terminals of the external device
Important
• For notes on use of volume detection, see “Safety
Precautions” in “Precautions for Use of Built-In Camera
Functions and Included Software” (p. 7).
• When Admin Viewer/VB Viewer has camera control
privileges, those camera control privileges are released if the
camera is moved to a preset position, specified in the
[Preset] settings (VB-S30D/VB-S31D only), by a volume
detection event operation.
Important
When [Active Output Format] is set to [Pulse] and a timer is
used, a single contact output is controlled when the timer starts.
Normally Open
Active Event
Inactive Event
1 (Terminals close)
0 (Terminals open)
Normally Close
Inactive Event
Active Event
1 (Terminals close)
0 (Terminals open)
60
open, and an inactive event occurs when the
terminals close.
(3) [Active Event Operation]
Select the operation to be performed upon an active
event. If [Enable] is selected, (6) [Preset], (7) [Video
Record] and (8) [E-mail Notification] will be executed
according to their settings upon an active event.
(4) [Inactive Event Operation]
Select the operation to be performed upon an inactive
event. If [Enable] is selected, (6) [Preset], (7) [Video
Record] and (8) [E-mail Notification] will be executed
according to their settings upon an inactive event.
(5) [Ongoing Active Event Operation]
Select the operation to be performed while an active
event is in progress. This can only be set when [Active
Event Operation] is set to [Enable].
If [Enable] is selected, (7) [Video Record] and (8) [E-
mail Notification] will be executed according to their
settings during the active event.
(6) [Preset]
If a preset is specified, the camera will automatically
orient to the specified preset position when an
external device input event occurs. To use presets, it
is necessary to set presets with the Preset Setting Tool
under Admin Tools (p. 94). If there is no need for
additional camera operation, select [None].
(7) [Video Record]
Specify the video record action. If [Enable] is
selected, video will be transmitted to the destination
selected in [Video Record Action] (p. 58) when an
external device input event occurs.
(8) [E-mail Notification]
Select the e-mail notification operation to be
performed. If [Enable] is selected, e-mail
notification will be performed when an external
device input event occurs. To use this function,
[Upload] > [E-mail Notification] must also be set
(p. 55).
(9) [External Device Output for Active Event]
Select whether external device output is active or
inactive upon an active event. Select [Disable] to
disable external device output.
(10)[External Device Output for Inactive Event]
Select whether external device output is active or
inactive upon an inactive event. Select [Disable] to
disable external device output.
(11)[Day/Night Mode Switching]
Select the Day/Night Mode switching behavior when
an external device input event is triggered.
When [Switch to Day Mode] is selected, switches to
Day Mode when an active event is triggered, and
switches to Night Mode when an inactive event is
triggered.
When [Switch to Night Mode] is selected, switches to
Night Mode when an active event is triggered, and
switches to Day Mode when an inactive event is
triggered.
Select [Disable] to disable Day/Night Mode switching.
Timer
(1) [Timer Event]
Select [Disable] or [Enable] for timer event.
(2) [Start Time]
Set the start time of the timer event in 24-hour format.
(3) [End Time]
Set the end time of the timer event in the 24-hour
format.
(4) [Repeat Interval]
Select [1 sec.] [5 sec.] [10 sec.] [30 sec.] [1 min.] [5 min.]
[10 min.] [15 min.] [20 min.] [30 min.] [1 hour] [3 hours]
[6 hours] or [12 hours] for the timer event repeat intervals.
Select [None] if an operation need not be repeated.
(5) [Video Record]
Specify the video record action. When [Enable] is
selected, video will be transmitted to the destination
selected in [Video Record Action] (p. 58) when a timer
event occurs.
(6) [E-mail Notification]
Select the e-mail notification operation to be
performed. If [Enable] is selected, e-mail notification
is performed when a timer event occurs. To use this
function, [Upload] > [E-mail Notification] must also be
set (p. 55).
(7) [External Device Output]
Select whether external device output is active or
inactive when a timer event occurs. Select [Disable] to
disable output to an external device.
Important
• When [Day/Night] in the Admin Viewer is set to [Auto], Day/
Night Mode switching will not happen when an external
device input event is triggered (p. 142).
• Camera control privileges are released if any of the following
actions occur while the Admin Viewer/VB Viewer has camera
control privileges.
– If the camera angle is moved according to
the [Preset] settings
– If the Day/Night Mode is switched using [Day/Night Mode
Switching].
[Event] Setting Video Record, Volume Detection, External Device Output/Input and Timer
61
Setting Page
3
(8) [Day/Night Mode Switching]
Select the Day/Night Mode switching behavior when a
timer event is triggered.
Select [Switch to Day Mode] to switch to Day Mode at
the start time, and Night Mode at the end time.
Select [Switch to Night Mode] to switch to Night Mode
at the start time, and Day Mode at the end time.
Select [Disable] to disable Day/Night Mode switching.
Note
When using timers that run continuously for 24 hours with a
[Repeat Interval] of 30 seconds or less, set the timer start and
end times so the timers can run continuously.
Example:
Important
• [Day/Night Mode Switching] can only be set in [Timer 1].
• [External Device Output] and [Day/Night Mode Switching] do
not support [Repeat Interval].
• When [Day/Night] in the Admin Viewer is set to [Auto], Day/
Night Mode switching will not happen when a timer event is
triggered (p. 142).
• If the [Day/Night Mode Switching] settings switch Day/Night
Mode while the Admin Viewer/VB Viewer is assigned camera
control, control will be released.
Timer [Start Time] [End Time] [Repeat Interval]
[Timer 1] 0:00 12:00 10 sec
[Timer 2] 12:00 0:00 10 sec
62
Administrator Password
For details on [Password] and [Confirm Password],
please refer to [Network] > [Administrator Password]
(p. 38) .
[Administrator Password] is the same. If you set one
[Administrator Password], the setting will be reflected in
the other [Administrator Password].
Authorized User Account
(1) [User Name], [Password]
Enter the user name and password and then click
[Add]. The authorized user will be added to the user
list.
The user name can consist of up to 15 (single-byte)
characters using A to Z, a to z, 0 to 9, “-” (hyphen) and
“_” (underscore).
The password can consist of 6 to15 (single-byte)
ASCII characters (space or printable characters).
(2) [User List]
A list of authorized users is shown. User authorities
can be set for these users. Up to 50 users can be
registered in addition to the Administrator (root).
Also, the user list can be sorted using the S T
buttons on the right.
To delete a user, select the applicable user from the
user list and then click [Delete].
User Authority
[Privileged Camera Control], [Camera Control], [Video
Distribution], [Audio Distribution]
Set the user authorities of authorized users and guest
users. Select the checkboxes corresponding to the
items you want to permit for each user.
Note
Authorized users have higher authorities than guest users.
For details, see “User Authorities and Camera Control Privileges”
(p. 124).
IPv4 Host Access Restrictions
(1) [Apply Host Access Restrictions]
Set IPv4 host access restrictions to [Disable] or
[Enable].
(2) [Default Policy]
If IPv4 host access restrictions are applied, select
[Authorize Access] or [Prohibit Access] for the default
policy.
(3) [Network Address / Subnet]
Create a list of permitted hosts and restricted hosts
and set IPv4 address access for each host to [Yes] or
[No].
You can specify the subnet and set access
restrictions by network or host.
If access is prohibited, access to all ports is
restricted.
[Access Control] Setting User Access Privileges
The following can be set here.
• Administrator Password
Set the administrator password.
• Authorized User Account
Register who can access this camera.
• User Authority
Set the authorities for authorized users and guest
users.
• IPv4 Host Access Restrictions
Specify the hosts from which IPv4 access is
permitted and restricted.
• IPv6 Host Access Restrictions
Specify the hosts from which IPv6 access is
permitted and restricted.
Important
• To prohibit access via a proxy server in HTTP connection, a
proxy server address must be set.
• If host access restriction is set mistakenly, access to the
setting pages themselves may be prohibited, in which case
restoring the factory default settings will become the only
means for recovery.
[Access Control] Setting User Access Privileges
63
Setting Page
3
Note
If the same address is duplicated, the policy for the address that
appears highest on the list will be applied.
IPv6 Host Access Restrictions
(1) [Apply Host Access Restrictions]
Set IPv6 host access restrictions to [Disable] or
[Enable].
(2) [Default Policy]
If IPv6 host access restrictions are applied, select
[Authorize Access] or [Prohibit Access] for the default
policy.
(3) [Prefix / Prefix Length]
Create a list of permitted hosts and restricted hosts
and set IPv6 address access for each host to [Yes] or
[No].
You can specify the prefix length and set access
restriction by network or host.
If access is prohibited, access to all ports is
restricted.
64
IPsec
(1) [IPsec]
Key settings for use with IPsec can be selected as
[Auto Key Exchange] or [Manual].
Auto Key Exchange Settings
(1) [IPsec SA Encryption Algorithm]
Set the IPsec SA encryption algorithm to [AES-
>3DES], [AES->3DES->DES] or [AES->3DES->DES-
>NULL].
The specified algorithm will be checked for an
applicable encryption algorithm starting from the left.
(2) [IPsec SA Authentication Algorithm]
Set the IPsec SA authentication algorithm to
[HMAC_SHA1_96] or [HMAC_SHA1_96->
HMAC_MD5_96].
The specified algorithm will be checked for an
applicable authentication algorithm starting from the
left.
(3) [IPsec SA Validity Period (min)]
Set the duration of validity for IPsec SA (factory default
setting is [480]).
(4) [ISAKMP SA Encryption Algorithm]
Set the SA encryption algorithm for use with auto key
exchange protocol IKE to [AES->3DES] or [AES->
3DES->DES].
(5) [ISAKMP SA Authentication Algorithm]
Set the SA authentication algorithm for use with auto
key exchange protocol IKE to [SHA1] or [SHA1-
>MD5].
(6) [DH Group]
Select the key generation information for the DH
algorithm that will be used for key exchange via auto
key exchange protocol IKE. The security level
increases with higher group numbers.
(7) [ISAKMP SA Validity Period (min)]
Set the duration of validity for ISAKMP SA (factory
default setting is [480]).
IPsec Set (Auto Key Exchange)
IPsec Sets 1 to 5 are available, and you can specify IPsec
settings for one communication device for each IPsec Set.
(1) [IPsec Set]
Set IPsec Set to [Disable], [Enable in IPv4] or [Enable
in IPv6].
(2) [IPsec Mode]
Set IPsec mode to [Tunnel Mode] or [Transport
Mode].
(3) [Destination IPv4 Address], [Destination IPv6 Address]
Enter the IP address of the connection destination.
(4) [Source IPv4 Address], [Source IPv6 Address]
Enter the IP address of the source.
(5) [Security Protocol]
Set the IPsec protocol to [ESP], [AH] or [ESP and AH].
(6) [Security Gateway IPv4 Address], [Security Gateway
IPv6 Address]
If IPsec mode is set to [Tunnel Mode] in (2), set the IP
address of the security gateway.
(7) [Destination Subnet Mask Length] (IPv4), [Destination
Prefix Length] (IPv6)
This setting is required only if IPsec mode is set to
[Tunnel Mode] in (2).
If IPv6 is used, enter a desired prefix length for the
connection destination in the range of 16 to 128.
If IPv4 is used, enter a desired length in the range of 1
to 32.
(8) [IKE Pre-Shared Key]
Enter the pre-shared key for IKE (auto key exchange)
(up to 127 characters).
[IPsec] Setting IPsec
The following can be set here.
•IPsec
Set the IPsec setting method.
• Auto Key Exchange Settings
Set auto key exchange.
•IPsec Set
IP security can be specified through auto key
exchange or manual setting with up to five
communicating devices.
[IPsec] Setting IPsec
65
Setting Page
3
Note
If auto key exchange is used, it will take approximately 5 to 10
seconds before communication with the camera starts.
IPsec Set (Manual)
IPsec Sets 1 to 5 are available, and you can specify IPsec
settings for one communication device for each IPsec Set.
(1) [IPsec Set]
Set IPsec Set to [Disable], [Enable in IPv4] or [Enable
in IPv6].
(2) [IPsec Mode]
Set IPsec mode to [Tunnel Mode] or [Transport
Mode].
(3) [Destination IPv4 Address], [Destination IPv6 Address]
Enter the IP address of the connection destination.
(4) [Source IPv4 Address], [Source IPv6 Address]
Enter the IP address of the source.
(5) [Security Protocol]
Set the IPsec protocol to [ESP], [AH] or [ESP and AH].
If [ESP] is selected, enter only the setting items
relating to ESP.
If [AH] is selected, enter only the setting items relating
to AH.
If [ESP and AH] is selected, enter all setting items.
(6) [Security Gateway IPv4 Address], [Security Gateway
IPv6 Address]
If [IPsec Mode] is set to [Tunnel Mode] in (2), set the
IP address of the security gateway.
(7) [Destination Subnet Mask Length] (IPv4), [Destination
Prefix Length] (IPv6)
This setting is required only if [IPsec Mode] is set to
[Tunnel Mode] in (2).
If IPv6 is used, enter a desired prefix length for the
connection destination in the range of 16 to 128.
If IPv4 is used, enter a desired length in the range of 1
to 32.
zIf [Security Protocol] is set to [ESP] or [ESP and AH] in
(5), (8) [SA ESP Encryption Algorithm] to (15) [SA ESP
SPI (inbound)] must be set.
(8) [SA ESP Encryption Algorithm]
Set the ESP encryption algorithm to [AES], [3DES],
[DES] or [NULL] according to the encryption
algorithm supported by the device to connect to.
Normally [AES] or [3DES] is recommended.
(9) [SA ESP Authentication Algorithm]
Set the ESP authentication algorithm to
[HMAC_SHA1_96], [HMAC_MD5_96] or [No
Authentication] according to the authentication
algorithm supported by the device to connect to.
If [ESP] is used alone, [No Authentication] cannot be
selected.
(10)[SA ESP Encryption Key (outbound)]
Set the SA encryption key for outbound. If [AES],
[3DES] or [DES] was selected in (8), set a 128-bit,
192-bit or 64-bit hexadecimal, respectively. This item
need not be set if [NULL] was selected.
(11)[SA ESP Authentication Key (outbound)]
Set the SA authentication key for outbound. If
[HMAC_SHA1_96] or [HMAC_MD5_96] was selected
in (9), set a 160-bit or 128-bit hexadecimal,
respectively. This item need not be set if [No
Authentication] was selected.
(12)[SA ESP SPI (outbound)]
Set the SA SPI value for outbound.
Set a desired value in the range of 256 to
4294967295.
(13)[SA ESP Encryption Key (inbound)]
Set the SA encryption key for inbound.
If [AES], [3DES] or [DES] was selected in (8), set a
128-bit, 192-bit or 64-bit hexadecimal, respectively.
This item need not be set if [NULL] was selected.
(14)[SA ESP Authentication Key (inbound)]
Set the SA authentication key for inbound.
If [HMAC_SHA1_96] or [HMAC_MD5_96] was
selected in (9), set a 160-bit or 128-bit hexadecimal,
respectively. This item need not be set if [No
Authentication] was selected.
(15)[SA ESP SPI (inbound)]
Set the SA SPI value for inbound.
Set a desired value in the range of 256 to
4294967295. Since this setting is used as an ID for
identifying the SA, be careful not to specify an
inbound SPI whose value is already used in the SPI for
other ESP.
Important
If the camera is rebooted during auto key exchange
communication, a connection error may result after rebooting.
In this case, connect again.
66
zIf [Security Protocol] was set to [AH] or [ESP and AH] in
(5), (16) [SA AH Authentication Algorithm] to (20) [SA
AH SPI (inbound)] must be set.
(16)[SA AH Authentication Algorithm]
Set the AH authentication algorithm to
[HMAC_SHA1_96] or [HMAC_MD5_96] according to
the authentication algorithm supported by the device
to connect to.
(17)[SA AH Authentication Key (outbound)]
Set the SA authentication key for outbound. If
[HMAC_SHA1_96] or [HMAC_MD5_96] was selected
in (16), set a 160-bit or 128-bit hexadecimal,
respectively.
(18)[SA AH SPI (outbound)]
Set the SA SPI value for outbound.
Set a desired value in the range of 256 to
4294967295.
(19)[SA AH Authentication Key (inbound)]
Set the SA authentication key for inbound. If
[HMAC_SHA1_96] or [HMAC_MD5_96] was selected
in (16), set a 160-bit or 128-bit hexadecimal,
respectively.
(20)[SA AH SPI (inbound)]
Set the SA SPI value for inbound.
Set a desired value in the range of 256 to
4294967295. Since this setting is used as an ID for
identifying the SA, be careful not to specify an
inbound SPI whose value is already used in the SPI for
another AH.
Note
If IPsec is used, video transmission performance drops.
Important
• To run this camera with IPsec, the communicating devices
and network must be set beforehand. Contact your System
Administrator for these settings.
• When connecting with IPsec, set the camera IP address
manually.
For IPv4 addresses, use addresses set with [Network] >
[IPv4 Address Setting Method] > [Manual].
For IPv6 addresses, use addresses set with [Network] >
[IPv6 Address (Manual)].
• If any setting is changed from the [IPsec] menu, the camera
may become inaccessible from the active web browser.
Check beforehand the precautions in “Important” in “[Reboot
Item] Setting Items Requiring Rebooting” (p. 74).
67
3
Setting Page
Certificates
(1) [Create Self-Signed Certificate]
After entering each of the following settings, click
[Exec] to create a self-signed certificate. Follow the
instructions in the message and reboot. The certificate
created will take effect after rebooting.
Note
Creating a certificate takes time, so it is recommended that you
stop video transmission and upload processes.
(2) [Certificate Status]
If no certificate is installed, [Not Installed] will appear.
If a certificate is installed, the validity period for the
certificate will appear.
(3) [Country (C)]
Enter the country code.
(4) [State/Province (ST)], [Locality (L)], [Organization (O)],
[Organizational Unit (OU)], [Common Name (CN)]
Enter state/province name, locality, organization
name, organizational unit and common name in ASCII
characters (spaces or printable characters). Enter a
FQDN format host name, etc. to set the common
name (required).
(5) [Validity Period Start Date], [Validity Period End Date]
Set the validity period of the certificate to be created in
the range of 2001/01/01 to 2031/12/31 (required when
creating a self-signed certificate).
Certificate Management
(1) [Generate Certificate Signing Request]
Click [Exec] to create server private key and generate
a certificate signing request. Once processed, the
certificate signing request will appear in a separate
window.
Note
Generating a certificate signing request takes time, so it is
recommended that you stop video transmission and upload
processes.
(2) [Display Certificate Signing Request]
Click [Exec] to view the details of the certificate
signing request.
(3) [Install Server Certificate]
Perform this operation to install a server certificate.
Click [Browse] to select the certificate file for
installation, then click [Exec]. The certificate installed
will take effect after rebooting.
(4) [Install Intermediate Certificate]
Perform this operation to install an intermediate
certificate. Select the certificate file to be installed
using [Browse] and click [Exec]. The installed
certificate will take effect after rebooting.
Note
To install an intermediate certificate and a primary intermediate
certificate, use a text editor or similar software to place them in
the same file and install them as an intermediate certificate.
(5) [Delete Certificate]
Click [Exec] to delete the server certificate. However,
if SSL communications are enabled, the certificate
cannot be deleted. Set [HTTPS Connection Policy] to
[HTTP] before deleting a certificate. The deletion will
take effect after rebooting.
[SSL/TLS] Setting HTTP Communication Encryption
The following can be set here.
• Certificates
Create an SSL/TLS certificate.
• Certificate Management
Manage the SSL/TLS certificate.
• Encrypted Communications
Set the encrypted communication.
Important
With regard to security, use a self-signed certificate where
complete security does not need to be ensured through
operation tests, etc. For system operation, it is recommended
that you acquire and install a certificate issued by a CA.
68
(6) [Display Server Certificate Details]
Click [Exec] to view the details of the server
certificate.
(7) [Display Self CA Certificate]
Used for the purpose of testing SSL communications,
but otherwise not normally used.
(8) [Backup]
Click [Exec] to perform a backup of the certificates
and private key. This operation can only be performed
when [HTTPS Connection Policy] is set to use [HTTPS]
or [HTTP and HTTPS], and SSL communications are in
use.
(9) [Restore]
Installs the certificates and private key from
backup. Click [Browse] to select the backup file,
then click [Exec]. This operation can only be
performed when [HTTPS Connection Policy] is set to
use [HTTPS] or [HTTP and HTTPS], and SSL
communications are in use. The restored certificate
will take effect after rebooting.
Encrypted Communications
(1) [HTTPS Connection Policy]
Select whether or not to use SSL communications with
HTTPS connections.
To not use SSL communications, select [HTTP].
To use SSL communications, select [HTTPS] or [HTTP
and HTTPS]. SSL connections will be possible after
rebooting.
When [HTTPS] is selected, even HTTP connections
will be redirected to HTTPS and SSL communications
will be used.
Note
• It may take a few minutes to generate an SSL key.
• Depending on the type of the certificate being installed on the
camera, a dialog box may appear indicating that the web
browser has accepted the certificate and a connection can be
made.
If the dialog box does not appear, register the CA certificate in
the web browser.
Important
• Even if SSL communications are set here to be used, they will
not be used if the certificate is not installed.
• Video transmission performance will drop, if SSL
communications are used. When [HTTPS] is selected,
communication with RM is not possible.
69
3
Setting Page
802.1X Authentication
(1) [802.1X Authentication]
Set 802.1X authentication to [Disable] or [Enable].
If [802.1X Authentication] is set to [Enable] and [Exec]
is clicked, “Before changing the setting, set 802.1X
authentication to “Disable.” is displayed below the
setting items and all settings are disabled, including
changing the authentication method and installation/
deletion of certificates.
To change settings, first set [802.1X Authentication] to
[Disable] and click [Exec].
(2) [Authentication Status]
Display the status of 802.1X authentication. There are
three types of status: [Authenticated],
[Unauthenticated], and [Stop].
Authentication Method
(1) [Authentication Method]
Select from [EAP-MD5], [EAP-TLS], [EAP-TTLS], and
[EAP-PEAP] for the 802.1X authentication method.
(2) [User Name]
Enter the user name used for authentication.
(3) [Password]
Enter the required password for authentication.
This is displayed only when [Authentication Method] is
set to [EAP-MD5], [EAP-TTLS], or [EAP-PEAP].
Certificate Information
This is displayed only when [Authentication Method] is set
to [EAP-TLS], [EAP-TTLS], or [EAP-PEAP].
(1) [CA Certificate Status]
If no CA certificate is installed, [Not Installed] is
displayed. If a CA certificate is installed, the validity
period of the certificated is displayed.
(2) [Client Certificate Status]
If no client certificate is installed, [Not Installed] is
displayed. If a client certificate is installed, the validity
period of the certificated is displayed. This is
displayed only when [Authentication Method] is set to
[EAP-TLS].
(3) [Client Private Key Status]
If no client private key is installed, [Not Installed] is
displayed. If a client private key is installed, [Installed]
is displayed. This is displayed only when
[Authentication Method] is set to [EAP-TLS].
Certificate Management
This is displayed only when [Authentication Method] is set
to [EAP-TLS], [EAP-TTLS], or [EAP-PEAP].
(1) [Install CA Certificate]
Installs a CA certificate. Select the certificate file to be
installed using [Browse] and click [Exec].
(2) [Install Client Certificate]
Installs a client certificate. Select the certificate file to
be installed using [Browse] and click [Exec]. This is
displayed only when [Authentication Method] is set to
[EAP-TLS].
(3) [Install Client Private Key]
Installs a client private key. Select the private key file
to be installed using [Browse] and click [Exec]. This is
displayed only when [Authentication Method] is set to
[EAP-TLS].
(4) [Client Private Key Password]
Enter the password for the client private key. Required
when a password has been configured for the private
key. This is displayed only when [Authentication
Method] is set to [EAP-TLS].
[802.1X] Network Port Authentication Settings
The following can be set here.
• 802.1X Authentication
Display the 802.1X authentication enable/disable
control and status.
• Authentication Method
Set the authentication method used for 802.1X
authentication.
• Certificate Information
Display the certificate used for 802.1X
authentication and the private key installation
status.
• Certificate Management
Manage the certificates and private keys used for
802.1X authentication.
70
(5) [Delete Certificate]
Deletes all installed CA certificates, client certificates,
and client private keys.
Only “CA Certificate” is displayed when
[Authentication Method] is set to [EAP-TTLS] or [EAP-
PEAP], but any installed client certificates and client
private keys are also deleted.
Important
• If any CA certificates, client certificates, and client private
keys already exist, they are discarded and new versions are
installed.
• An error occurs if the format of the certificate or private key to
be installed is incorrect.
• Client certificates and client private keys are checked as a
pair when installing, and an error occurs if they do not match.
• The certificate and private key used for 802.1X authentication
must be installed as separate items, irrespective of the
installation status of certificates for SSL/TLS.
71
3
Setting Page
Memory Card Operations (unmount status)
(1) [Mount/Unmount]
In unmount status, [Mount] will appear. Click [Mount]
to mount the memory card.
Note
microSD, microSDHC, and microSDXC memory cards can be
used with the camera.
When a memory card is inserted in the card slot, it is mounted
automatically. It is also mounted automatically if inserted in the
camera at the time of booting.
For inserting and removing the memory card, see “Installation
Guide” > “Using a Memory Card”.
(2) [Operation Settings]
Set write operations to the memory card to [Save Log]
or [Save Logs and Videos].
Note
• The following settings and operations will record video on a
memory card.
- When a network error occurs during recording-mode stream
- When uploading fails
- When [Video Record Action] in the [Event] menu (p. 58) is
set to [Record to Memory Card], and an event (volume
detection, external device input or timer) setting is enabled
and [Enable] is selected for [Video Record]
- When video is recorded due to an intelligent function event
occurrence (p. 101)
- When manually recorded to memory card from the Admin
Viewer (p. 145)
• New files cannot be saved to the
memory
card if there is no free
space.
(3) [Video Format]
Select the [JPEG] or [H.264(1)] video format to make
recordings to a memory card.
Video is recorded with
the settings defined under [Video] > [H.264(1)] (p. 48).
[H.264(2)] cannot be used. Video is recorded in this
format when [Record to Memory Card] is selected in
[Event] > [Video Record Action] (p. 58).
Note
• When [JPEG] is selected in [Video Format] and an upload error
occurs, the frame rate of video recorded in JPEG format is
always 1 fps.
• When a network error occurs during recording-mode stream,
video is saved in the JPEG format regardless of the [Video
Format] setting (the frame rate is fixed at 1 fps).
• Video size and quality of the recorded video are made
according to the settings in the [Video] menu.
(4) [Pre-event Buffer (number of frames)] / [Pre-event
Buffer (sec)]
Enter the number of frames or seconds of video to be
buffered before the event. The maximum amount is
number of frames for a [JPEG] selection and number
of seconds for an [H.264(1)] selection in [Video
Format].
(5) [Post-event Buffer (number of frames)] / [Post-event
Buffer (sec)]
Enter the number of frames or seconds of video to be
buffered after the event. The maximum amount is
number of frames for a [JPEG] selection and number
of seconds for an [H.264(1)] selection in [Video
Format].
(6) [Overwrite videos]
Select [Enable] or [Disable] for the overwrite setting of
video that is recorded to a memory card when an
event occurs. If you select [Enable], videos recorded
using an event and timer will be overwritten.
Overwriting is performed when the number of videos
that can be stored (100,000 files) for each of events
and timers is exceeded. Overwriting is not performed
when there is insufficient space on the memory card.
(7) [Format]
Click [Exec] to format the memory card. Formatting
erases all files and directories on the memory card.
[Memory Card] Memory Card Operations and Settings
The following can be set here.
• Memory Card Operations
Perform memory card operations.
• Memory Card Information
Display information about the memory card.
Important
• When an H.264 video is saved to a memory card, the
following restrictions apply to [H.264(1)] of [Video] (p. 48).
- Only [Use bit rate control] can be selected for [Bit Rate
Control].
- Only [3072] or less can be selected for [Target Bit Rate
(kbps)].
- Only one of [0.5], [1], and [1.5] can be selected for [I
Frame Interval (sec)].
• Since the [Pre-event Buffer] and [Post-event Buffer] set the
maximum value, it may not be possible to record the
specified number of frames or seconds of video depending
on conditions.
72
Note
The quick formatting method is used.
Memory Card Operations (mount status)
(1) [Mount/Unmount]
In mount status, [Unmount] will appear. Click
[Unmount] to unmount the memory card.
(2) [Operation Settings], [Video Format], [Pre-event
Buffer], [Post-event Buffer], [Overwrite videos]
These settings are the same as in “Memory Card
Operations (unmount status)”.
(3) [Delete Videos]
Click [Exec] to delete videos from the memory card.
During deletion, an indicator will appear to the right of
[Exec].
Note
• It may take 40 minutes or more to delete videos from the
memory card.
• Deleting videos takes time, so it is recommended that you stop
video transmission and upload processes.
(4) [Recreate Video Management Information]
Click [Exec] to recreate the video management
information.
During re-creation, an indicator will appear to the right
of [Exec]. The memory card is inaccessible during this
time.
Note
• It may take 90 minutes or more to recreate video management
information.
• Recreating video management information takes time, so it is
recommended that you stop video transmission and upload
processes.
Memory Card Information
(1) [Memory Card Recognition]
Displays the status of the memory card. The three
status messages are [Memory Card Not Inserted],
[Not Mounted] and [Mounted].
(2) [Memory Card Operation Status]
Displays the operation status of the memory card. The
three status messages are as follows.
• [Operable]: This status indicates that any operation
may be performed.
• [Recreating video management information]: This
status indicates that video management information
is being recreated. Other operations cannot be
performed.
• [Deleting videos]: This status indicates that videos
are being deleted. Other operations cannot be
performed.
(3) [Video Management Information Status]
Displays the status of the video management
information. The two status messages are as follows.
• [Normal]: This status indicates that video
management information is normal.
• [Video Management Information Recreation
Required]: This status indicates that management
files are corrupted or not consistent with saved
video files. It is necessary to click [Exec] in
[Recreate Video Management Information] to
recreate video management information.
If the management files are not recreated even
when [Recreate Video Management Information] is
used, [Format] (p. 71) must be used.
(4) [Video Saving]
Displays whether or not videos can be saved to the
memory card.
• [Can Save]: Indicates that videos can be saved to
the memory card.
• [Cannot Save]: Indicates that videos cannot be
saved to the memory card. This status may be
caused when the memory card is not mounted, the
video file count upper limit has been reached, the
video management file is corrupted or the card is
write-protected.
(5) [Memory Card Capacity (KB)]
Displays the memory card storage capacity.
(6) [Used Capacity (KB)]
Displays information about storage used on the
memory card.
Important
Be sure to perform the unmount process when turning off the
power to the camera or removing the memory card. Failing to
unmount first may result in management file problems or the
memory card becoming inaccessible.
You can use the Camera Management Tool to mount/unmount
memory cards from multiple cameras at the same time.
[Memory Card] Memory Card Operations and Settings
73
Setting Page
3
Note
For accessing files saved to the memory card, see “Memory Card
Access” (p. 148).
Important
Information recorded to the memory card may be regarded as
“personal information”. Take sufficient precautions for handling
this information when releasing to third parties for disposal,
transfer or repair.
74
(1) [LAN]
LAN interface, maximum packet size settings (p. 38)
(2) [IPv4]
IP address, IPv4 settings, etc. (p. 38)
(3) [IPv6]
Settings regarding IPv6 (p. 39)
(4) [HTTP Server]
Authentication method, HTTP, and HTTPS port
settings (p. 57)
[Reboot Item] Setting Items Requiring Rebooting
The following settings that require rebooting before
changes take effect can be found on a single page.
• LAN, IPv4, IPv6, HTTP Server
Important
These settings relate to network connectivity*. If any setting is
changed to a value that may disable camera connection from
the active web browser, a dialog box appears and alerts the
user.
Click [OK] to apply the new setting.
Depending on the new setting, it may not be possible to
connect to the camera again after rebooting. If this happens, a
candidate URI for reconnecting the camera will appear if
available.
Try the URI displayed to reconnect the camera.
If you cannot connect to the camera through the displayed URI,
contact your System Administrator.
* [LAN Interface], [Maximum Packet Size], [IPv4 Address Setting
Method], [IPv4 Address], [Subnet Mask], [IPv6], [Auto (RA)],
[Auto (DHCPv6)], [IPv6 Address (Manual)], [Prefix Length],
[HTTP Port] and [HTTPS Port].
75
3
Setting Page
Device Information
[Model Name], [Firmware Version], [Serial Number], [Build
Number], [MAC address]
Displays information about the currently connected camera.
Tool
(1) [View Logs]
Display a history of camera operations and
connections to each viewer, etc.
(2) [View Current Settings]
Display a list of current settings.
(3) [Reboot]
The camera is rebooted.
The camera angle will return to the home position. If a
home position has not been registered, the camera
will return to the factory default home position setting.
See p. 96 for details on registering a home position.
(4) [Restore Default Settings]
Except for the following items, all user-defined
settings will be discarded and restored to factory
default settings after the camera is rebooted.
– Administrator password
– Network LAN, IPv4, IPv6
– Date and time
– Host access restrictions for access control
–SSL/TLS
–802.1X
(5) [Back Up Settings]
Back up all settings, other than the date and time, to a
memory card.
The IP address, SSL or 802.1X certificates, and
private key files are also backed up.
(6) [Restore Settings]
Restore all settings, other than the date and time, from
a backup file on a memory card.
The IP address, SSL or 802.1X certificates, and
private key files are also restored.
The camera reboots after settings are restored.
Note
• It is recommended that you back up all current setting values
before restoring factory default settings in [Restore Default
Settings].
• The camera can be restored to factory default settings using
the reset switch as well. Note, however, that this will reset all
camera settings to factory default settings except for date and
time (p. 166).
Log Notifications
(1) [Use log notifications]
Set log notifications to [Disable] or [Enable]. Log
messages, such as when errors occur, can be sent by
e-mail when [Enable] is selected.
[Maintenance]
Viewing Current Settings, Event Logs and Performing Maintenance
The following items can be used here.
• Device Information
Display information about the current device.
•Tool
Display or Initialize Camera Settings, and Back
Up/Restore Settings.
• Log Notifications
Set log message mail notifications.
Caution
You must not turn off the camera while it is
performing the [Restore Default Settings], [Back Up
Settings] or [Restore Settings] operation. Turning
off the camera at this stage may result in making it
unable to boot correctly.
Important
• If the restored settings were backed up from a different
camera, note that an address conflict on the network may
occur.
• When restoring settings on a camera, do not use backup files
that were created with firmware versions newer than that of
the camera.
76
For details on log messages, see “List of Log
Messages” (p. 154).
(2) [Notification Level]
Select [Error], [Errors and warnings], or [All] for the
log message notification level.
For details on log messages, see “Log Messages on
the Camera” (p. 154).
(3) [Copy E-mail Settings]
Copy the mail settings used in [Upload] > [E-mail
Notification] (p. 55).
(4) [Mail Server Name]
Enter the host name or IP address of the SMTP server
(using up to 63 characters).
(5) [Mail Server Port]
Enter the port number of the SMTP server (factory
default setting is [25]).
(6) [Sender (From)]
Set the e-mail address of the sender (using up to 63
characters).
(7) [Recipient (To)]
Set the e-mail address of the recipient (using up to 63
characters).
(8) [Authentication]
Select [None], [POP before SMTP] or [SMTP-AUTH]
for the e-mail authentication method.
Set an appropriate method according to the
authentication method used by the SMTP server to
send to.
[User Name], [Password], [POP Server]
If [POP before SMTP] is selected as the e-mail
authentication mode, enter the user name and
password as well as the host name or IP address of
the POP server required for authentication.
[User Name], [Password]
If [SMTP-AUTH] is selected as the e-mail
authentication method, enter the user name and
password required for authentication.
(9) [Subject]
Enter the subject of the e-mail to be sent using up to
31 ASCII characters.
(10)[Log Notification Test]
Clicking [Exec] initiates a log notification test based
on the settings currently entered. It is not necessary to
click [Apply].
After entering a password, first click [Exec], then
[Apply] the password.
77
3
Setting Page
(1) Video Display Area
Displays video currently captured by the camera.
(2) [Resize] button
Each time this button is clicked, the screen size of the
video display area switches between “480 x 270” and
“960 x 540”.
(3) [Reconnect] button
The camera is reconnected.
(4) [Zoom] slider, [Zoom] buttons
These control the digital zoom ratio.
The [Zoom] slider zooms in (telephoto) by moving the
knob upwards or zooms out (wide-angle) by moving
the knob downwards.
The [Zoom] buttons zoom in or out continuously while
pressed, and stop when released.
(5) [Control for Admin] button
This button displays the [Exposure Compensation]
slider.
(6) [Image Flip] selection box
Select the orientation of the camera video. If [Enable]
is selected, the video is displayed rotated by 180
degrees.
(7) [Save settings]
Save the current zoom and [Image Flip] settings in the
camera.
If the zoom or [Image Flip] settings have been
changed, be sure to save the settings in the camera
using the [Save settings] button.
(8) [Restore settings]
Discard the settings you have specified and restore
the settings saved in the camera.
Note
• [Camera Angle] can be operated only from the Setting menu. It
cannot be operated from Admin Viewer or VB Viewer.
• Connecting to the camera from the [Camera Angle] menu will
disconnect connections from each type of viewer and
recording software that are not connected via RTP.
• The higher the digital zoom ratio, the lower the video quality
becomes.
• Revise the following settings after saving the [Camera Angle]
settings.
- Privacy mask settings
- Preset settings
- Intelligent function settings
• [Camera Angle] supports connection to a single camera for up
to 30 minutes.
Setting the Exposure Compensation
You can set any of nine levels of video brightness.
To darken the video, drag the slider toward [Dark]. To
brighten the video, drag the slider toward [Bright].
Note
• The exposure compensation value set by [Camera Angle] is
not reflected under [Camera] > [Initial Camera Settings] >
[Exposure Compensation] (p. 44).
• After [Exposure] is set to [Manual] and adjusted in Admin
Viewer (p. 141), [Exposure] is automatically reset to [Auto].
[Camera Angle] Digital Zoom Settings
The following can be set here.
• Zoom operations
Operate the digital zoom function.
• Image Flip
Flip the video image vertically.
• Control for Admin
Set the exposure compensation.
(1) (2)
(3)
(4)
(5)
(6)
(8) (7)
78
Chapter 4
Admin Tools
❏Privacy Mask Setting
❏Panorama Image Registration
❏View Restriction Setting
❏Camera Preset Setting
❏Intelligent Function Setting
❏Viewing Logs
❏Managing Memory Card Video
80
Admin Tools consists of applications for remotely making camera settings, checking operating conditions, and acquiring logs.
Admin Tools
This is the top page of Admin Tools. All tools can be
launched from this page.
Privacy Mask Setting Tool
A tool that lets you hide areas you do not want to be seen
by setting privacy masks. Up to eight areas can be
masked, allowing thorough protection of privacy.
Panorama Creation Tool
A panorama image creation tool that shows the entire
area that can be captured by this camera. Once a
panorama image is captured and registered, it is shown in
the panorama display panel of the viewer. As the
panorama image is also shown when view restrictions and
presets are set, you can see at a glance which part of the
entire area the set area is occupying.
View Restriction Setting Tool
The View Restriction Tool restricts the viewable capture
range in the VB Viewer. You can set the desired range
with the mouse by referring to the preview in panorama
mode.
Admin Tools Overview
(p. 82)
(p. 83)
(p. 87)
(p. 90)
Admin Tools Overview
81
4
Admin Tools
Preset Setting Tool
A tool that lets you set presets and the home position
visually. You can make the desired settings with the
mouse by referring to the preview in panorama or full
video mode.
Intelligent Function Setting Tool
This tool is used to set intelligent functions that perform
uploads, notify the viewer, record a log, etc., if a change
has occurred in the captured video due to movement of a
subject. By setting the conditions, you can let the camera
detect events such as “moving object”, “abandoned
object”, “removed object”, “camera tampering”,
“passing”. You can view the video on the camera while
setting the position and size of the detection area and line,
detection conditions, etc.
Log Viewer
This viewer shows the logs of operating conditions of the
camera.
Recorded Video Utility
This is a utility for browsing and managing video recorded
on memory cards inserted in the camera. You can display
a list of recorded video, play it back, delete it and
download it.
(p. 94)
(p. 101)
(p. 113)
(p. 116)
82
Launching the Admin Tools
The Admin Tools can be launched from the top page of
the camera.
A user authentication window appears.
The Admin Tools top page will appear.
(1) [Admin Viewer]
Click to launch Admin Viewer.
(2) [Setting Page]
Click to launch Setting Menu.
(3) [Back to top]
Click this button to navigate to the top page.
(4) [Admin Tools]
Click the buttons of any tool to launch Admin Tools.
Note
• The first time you launch any of the Admin Tools, wait about 5
to 10 seconds until the software is downloaded to your
computer. From then on, launching will be quicker. Also, when
accessing via SSL encrypted communication, download time
will take longer (about 20 to 30 seconds).
• None of the following tools can be launched concurrently:
Privacy Mask Setting Tool, Panorama Creation Tool, View
Restriction Setting Tool, Preset Setting Tool and Intelligent
Function Setting Tool.
• In environments without a proxy server, select [Internet
options] > [Connections] tab > [LAN settings] and clear the
[Automatically detect settings] checkbox in Internet Explorer.
• Any of the Admin Tools can also be launched from the Camera
Management Tool. For details, please refer to the “Camera
Management Tool User Manual”.
Accessing the Admin Tools
1Start the top page of the camera (p. 29).
2Click [Admin Tools].
3Enter a user name and password and click [OK]
(p. 29).
Important
The Admin Tools Certificate must be installed on any computers
using [Admin Tools]. (p. 26)
(1) (2) (3)
(4)
83
Admin Tools
4
A tool that lets you cover certain areas on the camera video with privacy masks.
When the camera is panned, tilted, or zoomed, the privacy mask area responds to the camera video.
Display Screen of Privacy Mask Setting Tool
(1) Video Display Area
The video currently captured by the camera is shown.
Privacy masks can be resized/moved in the video
display area.
Pan, tilt, and zoom operations are the same as in the
Admin Viewer. For details, see “How to Operate the
Viewer” (p. 127).
(2) [Switch Mouse Operation] button
Each time this button is clicked, the button switches
between and , and the mouse operation in the
video display area changes.
When the button is set to , privacy masks can be
resized/moved. While in this mode, the camera
orientation will not change.
When the button is set to , pan/tilt operations can
be performed.
(3) [Switch Screen Size] button
Each time this button is clicked, the screen size of the
video display area switches between “480 x 270” and
“960 x 540”.
(4) [BLC] (Back Light Compensation) button
This button turns on/off backlight compensation. This
control is effective when the video is dark due to
backlight.
(5) [Obtain/Release Camera Control] button
This button is used to obtain/release the camera
control privileges. For details, see “Obtaining Camera
Control Privileges” (p. 129). If camera control
privileges have not yet been obtained elsewhere,
Privacy Mask Setting Tool
You can set privacy masks
for up to eight areas while
checking the video on the
camera.
(1)
(5)(6) (15) (16)(4)
(14)-1
(14)-2
(14)-3
(14)-4
(14)-5
(14)
(13)
(12)
(3)(2) (7)
(10)
(11)
(8)
(9)
84
such as in the Admin Viewer, the control privileges will
be obtained the moment the Privacy Mask Setting
Tool is launched.
(6) [Control for Admin] button
Displays the Control for Admin Panel (p. 121).
(7) Registered Privacy Mask Display Area (Capture area)
You can check the settings for the area where the
camera can physically capture privacy masks.
Even if a panorama image is saved in the camera, it
will not be displayed here.
(8) [Registered Privacy Masks]
Show the number of registered privacy masks. You
can set up to eight privacy masks.
(9) [Next]
When multiple privacy masks are set, clicking this
button switches to the privacy mask selected.
(10)[Color]
Choose the color for the privacy mask area. All
privacy mask areas are set to the selected color.
(11)[Quick add]
Add a privacy mask area and save it in the camera.
(12)[Quick change]
Change a privacy mask area and save it in the
camera.
(13)[Delete]
Delete the privacy mask area selected from the
camera.
(14)[Detailed Settings]
Show the detailed settings.
(14)-1 [Enable privacy mask] checkbox
Select the checkbox if you want to enable the
selected privacy mask area settings.
(14)-2 [Pan], [Tilt], [Zoom]
You can specify values for each camera angle.
(14)-3 [Get camera position]
Load the current camera angle. Load the pan, tilt,
and zoom settings of the camera and show them in
(14)-2.
(14)-4 [Privacy Mask Position and Size]
Set left and upper edge, width, and height of the
privacy mask.
(14)-5 [Preview settings]
The settings will be reflected in the video display
area and in the registered privacy mask display
area (capture area).
(15)[Restore settings]
Clear the settings you have specified on the screen of
the tool and restore the settings saved in the camera.
(16)[Save settings]
Save the privacy mask settings specified under
[Detailed Settings] in the camera.
Setting the Privacy Mask Area
Set the privacy mask area while checking the video on the
camera.
A preview frame showing the privacy mask area is
shown in the video display area.
If you want to change the size, drag the square
markers (■) positioned at the four sides of the preview
frame. Drag from inside the frame to move the privacy
mask area.
If you want to cancel the changes and restore the
settings saved in the camera, click [Restore settings].
The set privacy mask area is saved in the camera.
You can set up to eight privacy masks. Repeat the
setting operations to set multiple privacy mask areas.
Saved privacy mask areas are shown in the video
display area and registered privacy mask display
area (capture area).
1If you have not yet obtained the camera control
privileges, click the [Obtain/Release Camera Control]
button and obtain the control privileges.
2Set the position and size of the privacy mask area.
3Click [Quick add] to save the privacy mask area.
4Confirm privacy mask areas.
Privacy Mask Setting Tool
85
4
Admin Tools
(1) Privacy Mask Area
Enabled privacy mask areas are shown filled with
color. Disabled privacy mask areas are just shown
in a frame.
(2) View Restriction Area
This is the area set with the View Restriction Setting
Tool.
(3) Privacy Mask Area
Privacy masks for which the [Enable privacy mask]
checkbox is selected are shown filled with color.
Privacy masks that are not selected are shown in a
hatched frame.
(4) Maximum Wide-angle Area
This is the visible area when the camera is at
maximum wide-angle. This area is only shown
when a privacy mask area (3) is being dragged.
(1) (2) (3) (4)
(1) (3)
Important
• The privacy mask areas are also part of the intelligent
function detection area. Subject movement may be seen.
• Privacy masks are applied to all video transmitted from the
camera (live video, uploaded video, recorded video, video
recorded to a memory card).
• Check privacy mask settings again if the [Video] > [Video
Size Set] settings on the Setting page have been changed.
• The privacy mask function is not available in the following
situations:
– While the camera is starting up after being turned on
– For the video display area in [Setting
Page] > [Camera Angle]
– While a panorama image is being created
• The position of the privacy mask will need to be set again if
the image flip setting is changed.
• Set the privacy mask area to a somewhat larger size than the
area you want to hide. Also, be sure to confirm that after
setting a privacy mask, the area you want to hide does not
become visible when the camera direction is altered by pan,
tilt, or zoom operations.
• If the privacy mask settings were changed after a panorama
image was saved using the Panorama Creation Tool, the
panorama image must be recreated using the Panorama
Creation Tool.
• Privacy masks may deviate slightly from their specified
positions depending on the zoom position.
• You can set privacy masks for optical zoom areas only.
Privacy mask areas cannot be set in digital zoom areas.
86
Changing/Deleting a Privacy Mask Area
How to Change
Click the privacy mask area you want to change in the
registered privacy mask display area (capture area)
or select a privacy mask area by clicking [Next].
Privacy mask areas can be changed using the mouse
or by entering values.
Entering values
Click [Detailed Settings].
Enter a value for the [Privacy Mask Position and Size]
and click [Preview settings] to check the position and
size of the preview frame.
Click [Get camera position] to load the current pan,
tilt, and zoom settings.
If you want to cancel the changes and restore the
settings saved in the camera, click [Restore settings].
The changed privacy mask area is saved in the
camera.
Note
Select a disabled privacy mask and click [Quick change] to
enable it.
How to Delete
Select the privacy mask area you want to delete and click
[Delete].
The privacy mask area that was saved in the camera is
deleted.
1Select the privacy mask area you want to change.
2Change the position and size of the privacy mask area.
3Click [Quick change] or [Save settings] to save the
privacy mask area.
87
Admin Tools
4
A panorama image capture/creation tool that shows the entire area that can be captured by this camera. When performing
pan, tilt, or zoom operations, setting presets using the viewer, etc., you can see at a glance which part of the entire area the
set area is occupying.
Admin Viewer Preset Setting Tool
Panorama Creation Tool
Important
If the privacy mask settings were changed using the Privacy Mask Setting Tool, it is
recommended that you recreate the panorama image to reflect the new privacy mask
settings in the panorama image.
Create/capture a panorama image with the Panorama Creation Tool and save
it in the camera.
You can see at a glance which
part of the entire area the
displayed area is occupying.
88
Display Screens of Panorama Creation Tool
(1) [Load from camera]
Show the panorama image saved in the camera.
(2) [Save to camera]
Save the currently shown panorama image in the
camera.
(3) [Load from file]
Show JPEG files as a panorama image.
(4) [Save to file]
Save the currently shown panorama image as a JPEG
file.
(5) Creation date and time
Show the date and time a panorama image was
captured or loaded from a JPEG file.
(6) [Clear]
Delete the currently shown panorama image.
(7) Panorama Image Display Area
Show the panorama image.
(8) [Cancel]
Stop the capture of a panorama image.
(9) [Start Panorama Creation]
Start capturing a panorama image.
(10)[Finish Panorama Creation]
Confirm the captured panorama image.
(11)Status Display
Show the panorama image capturing status, such as
[Capturing images...], etc.
(12)[Exposure Lock]
Select [Center] or [Current Position] for the auto
exposure lock position.
(13)[White Balance Lock]
Set the white balance to [Do not lock], [Center], or
[Current Position].
(14)[Focus Lock]
Set the focus to [Do not lock], [Center], or [Current
Position].
Capturing a Panorama Image
The capture is started.
Change the settings beforehand for [Exposure Lock],
[White Balance Lock], and [Focus Lock] (VB-S30D
only) as necessary.
To stop the capture when underway, click [Cancel].
When you position the mouse pointer over the
panorama image, a white grid is shown. If you want to
recapture part of the panorama, position the pointer
inside the grid, right-click and select [Recapture].
To recapture an entire panorama image, click [Start
Panorama Creation] again.
Note
• The following users will be disconnected while creating a
panorama image.
- All users except for administrators
(1)
(5)
(6)
(7)
(8)
(11)
(9) (10)
(14)
(2) (3) (4)
(12)
(13)
1Click [Start Panorama Creation].
Panorama Creation Tool
89
4
Admin Tools
- Users not connected via RTP
• When a small value is entered for [Maximum Frame Rate:
Video Transmission] under [Video] > [JPEG] in the Setting
page, panorama capture is slowed down.
Saving/Deleting a Panorama Image on the
Camera
After creating the panorama image, it is sent to and saved
on the camera to update the camera's panorama image.
How to Save
Click [Save to camera], and then click [OK] in the
displayed dialog box.
The panorama image is saved to the camera.
How to Delete
The image in the panorama image display area will be
cleared.
The panorama image saved in the camera is deleted.
Saving a Panorama Image as Image Files/
Opening from Image Files
You can save a recorded panorama image as an image
file or open image files as a panorama image. Only JPEG
image files created using Panorama Creation Tool can be
handled.
How to Save
Click [Save to file] and then select the folder you want to
save the image file in and enter the file name in the
displayed dialog box.
How to Open from Image Files
Click [Load from file] and then select the image files you
want to use in the displayed dialog box.
2When the capture is complete, click [Finish Panorama
Creation] if the image is satisfactory.
1To delete the panorama image saved to the camera,
click [Clear].
2Click [Save to camera], and then click [OK] in the
displayed dialog box.
90
View Restriction Setting Tool is a tool that limits the range that can be captured by the camera. If view restrictions have been
set, you can limit the displayable capture range using the viewer.
[Apply View Restriction Setting]
Restrictions set by the View Restriction Setting Tool are applied in the following cases.
• When the Admin Viewer is accessed with authorized user authorities
• When the VB Viewer is accessed
• When accessed via the Intelligent Function Setting Tool
• When accessed via RM-Lite
View Restriction Setting Tool
To limit zoom or a certain field of view when publishing live video, use the
View Restriction Setting Tool to set the view restrictions easily.
View Restriction Setting Tool
91
4
Admin Tools
Display Screens of View Restriction Setting Tool
(1) Video Display Area
The video currently captured by the camera is shown.
Pan, tilt, and zoom operations are the same as in the
Admin Viewer. For details, see “How to Operate the
Viewer” (p. 127).
(2) [Switch Mouse Operation] button
Click the button to switch to . In this mode, move
the mouse pointer to the video display area and click
to operate the pan and tilt. Click the button again to
return to .
(3) [Switch Screen Size] button
Each time this button is clicked, the screen size of the
video display area switches between “480 x 270” and
“960 x 540”.
(4) [Obtain/Release Camera Control] button
This button is used to obtain/release the camera
control privileges. For details, see “Obtaining Camera
Control Privileges” (p. 129).
(5) [Control for Admin] button
Displays the Control for Admin Panel (p. 121).
(6) [Panorama Screen]
The panorama image registered in the camera is
shown. View restriction preview frames, representing
the view restriction setting values, are also shown. You
can drag the frames to change their shapes, with the
new settings being reflected in View Restriction
Settings.
• View restriction preview frame
(6)-1 Pan/tilt preview frame (red frame)
Range of field of view defined by
top/ bottom/left/right edges
(6)-2 Wide-angle preview frame (green frame)
Wide-angle restriction setting (restriction of
capture frame)
(6)-3 Telephoto preview frame (yellow frame)
Telephoto restriction setting (restriction of
maximum zoom ratio)
(7) [Digital Zoom]
The current digital zoom usage status of the camera is
shown in real time.
(8) [Apply the view restriction]
To use view restrictions, select this checkbox.
(9) View restriction setting entry boxes and [Get value]
You can enter a value in each view restriction setting
entry box to change the applicable setting. You can
load the values for the current camera angle to the
view restriction settings by clicking [Get value].
• View restriction settings
[Upper Limit]: Top limit of the view restriction. Click
[Get value] to load the top edge
value of the current camera angle.
[Lower Limit]: Bottom limit of the view restriction.
Click [Get value] to load the bottom
edge value of the current camera
angle.
[Left Limit]: Left limit of the view restriction. Click
[Get value] to load the left edge value
of the current camera angle.
[Right Limit]: Right limit of the view restriction.
Click [Get value] to load the right
edge value of the current camera
angle.
[Telephoto]: Telephoto limit of the view restriction.
Click [Get value] to load the zoom
ratio of the current camera angle.
[Wide-angle]:
Wide-angle limit of the view restriction.
Click [Get value] to load the zoom
ratio of the current camera angle.
(1)
(4)(5) (11) (12)
(10)
(3)(2)
(6)
(6)-1
(6)-2
(6)-3
(7)
(8)
(9)
92
(10)[Display in panorama screen]
Apply the current view restriction settings to the
panorama screen. At this point, the settings are not
yet saved in the camera. Be sure to click [Save
settings].
(11)[Restore settings]
Clear the settings you have specified on the screen of
the tool and restore the settings saved in the camera.
(12)[Save settings]
Save the set view restriction in the camera.
After the view restriction has been set, be sure to save
the settings in the camera by clicking [Save settings].
Setting View Restrictions
You can set view restrictions by entering values in the
view restriction setting entry boxes, or by changing the
current settings in the view restriction preview frame of the
panorama screen or from the camera angle in the video
display area. Select appropriate settings according to the
environment in which the camera is operated or the
purpose for which it is used.
Use the preview frame on the panorama
image to set view restrictions.
When the telephoto/wide-angle preview frames are
enlarged/shrunk, the aspect ratio remains the same.
At this time, you can also enter view restrictions by
entering values in the view restriction setting entry
boxes. If you have adjusted the view restriction
settings, click [Display in panorama screen]. The
settings are reflected in the preview frame of the
panorama screen.
Confirm that the settings have been applied correctly,
and then click [Save settings] to save the settings in
the camera.
Setting by Loading Position Information from
Video in Video Display Area
The loaded view restriction can be checked in the
view restriction setting entry box or view restriction
preview frame.
The settings are saved in the camera.
Note
• Even when view restrictions are set, an area outside the view
restriction may still appear momentarily when the camera is
controlled near the boundary of the view restriction.
• To cancel the view restrictions, clear the [Apply the view
restriction] checkbox and then click [Save settings].
• If the setting fields are cleared while the [Apply the view
restriction] checkbox is selected, the maximum view restriction
will be set.
• The controllable range and range that can be captured are as
follows.
1Select the [Apply the view restriction] checkbox.
2Drag to change the [Pan/tilt preview frame (red
frame)], [Telephoto preview frame (yellow frame)], or
[Wide-angle preview frame (green frame)] shown on
the panorama screen to set view restrictions.
3Click [Save settings].
1Select the [Apply the view restriction] checkbox.
2Click the [Obtain/Release Camera Control] button to
obtain the control privileges of the camera.
3Operate the camera to adjust the top edge, bottom
edge, left edge, right edge, telephoto, or wide-angle to
desired positions, and click [Get value] each time.
4Click [Save settings].
Important
• If you have changed the camera mounting method,
recapture the panorama image and register it again.
• Check view restriction settings again if the [Video] > [Video
Size Set] settings on the Setting page have been changed.
• The panorama screen may be slightly different from the
actual image. After view restrictions have been set, be sure
to confirm with the VB Viewer that the view restrictions have
been reflected correctly.
• Confirm the settings using the VB Viewer. (View restrictions
are not applied to the video display area of this tool, nor to
the Admin Viewer.)
• If the digital zoom setting has been changed, check the view
restriction settings again.
View Restriction Setting Tool
93
4
Admin Tools
• The pan and tilt ranges vary depending on the zoom ratio
(view angle).
• If the view restriction will be exceeded as a result of controlling
the zoom toward maximum wide-angle, the camera will first
pan and tilt to a position where the maximum wide-angle zoom
will be within the viewing restriction area. Wide-angle zoom
control will then be enabled within the view restriction area.
• Reducing the view restriction may also reduce the zoom range.
Pan controllable area
Maximum horizontal captured area
Maximum wide-angle viewing angle
Maximum vertical capture area
Tilt controllable area
Setting view restrictions
automatically restricts
the camera operating
angle.
When wide-angle is selected,
the capture of the camera
operating angle would exceed
the view restrictions if it
remained the same. Therefore, it
is narrowed automatically.
View restrictions
Camera operating angle
Captured video range
Camera
Zoom
out
Captured video
Restricted view angle
Zoom
out
First, the center of the
maximum wide-angle
zoom is panned and
tilted.
After panning and
tilting, wide-angle zoom
control is enabled within
the view restriction.
94
A tool that lets you set presets and the home position. You can set up to 64 presets (VB-S30D/VB-S31D) and the home
position while viewing the preview in the panorama or full video mode.
Preset Setting Tool
Preset Setting Tool
Important
• If you want to use intelligent functions, it is strongly recommended that you use the
Preset Setting Tool to register a preset that corresponds to the camera position of the
area where you want to use intelligent functions.
• The camera angle will be as follows when the camera is rebooted:
Home position registered: Camera angle will move to the home position
Home position not registered: Camera angle will move to the factory default home
position
• When using presets registered in digital zoom range, the registered camera
positions may not be reproduced with high accuracy. It is recommended that you
use presets registered in the optical zoom range for the Intelligent Function.
• Presets that were set with the Preset Setting Tool cannot be used for the settings of
intelligent functions.
Reflecting in the viewer
Preset Setting Tool
95
4
Admin Tools
Display Screens of Preset Setting Tool
(1) Video Display Area
The video currently captured by the camera is shown.
Pan, tilt, and zoom operations are the same as in the
Admin Viewer. For details, see “How to Operate the
Viewer” (p. 127).
(2) [Switch Mouse Operation] button
Click the button to switch to . In this mode, move
the mouse pointer to the video display area and click
to operate the pan and tilt. Click the button again to
return to .
(3) [Switch Screen Size] button
Each time this button is clicked, the screen size of the
video display area switches between “480 x 270” and
“960 x 540”.
(4) [Obtain/Release Camera Control] button
This button is used to obtain/release the camera
control privileges. For details, see “Obtaining Camera
Control Privileges” (p. 129).
(5) [Control for Admin] button
Displays the Control for Admin Panel (p. 121).
(6) [Panorama Screen]
The panorama image registered in the camera is
shown. A preset preview frame (yellow) reflecting the
preset settings is shown, where you can drag to resize
or move the frame and reflect the new frame in the
preset settings. Also, if view restrictions are set, those
areas are shown in a blue frame.
(7) [Home Position/Preset] selection box
Select the preset or [Home Position] you want to set.
(8) [Quick Registration]
Load the current camera position, and register them
as preset settings.
(9) [Preset Name]
You can enter a preset name of up to 64 characters.
You can set a name in alphanumeric characters. Be
sure to enter a single-byte alphanumeric preset name.
When the [Home Position] is selected in (7), the preset
name function is grayed out.
In a [Preset Name], ASCII characters (spaces or
printable characters) can be used.
(10)[Detailed Settings]
Show the detailed settings.
(10)-1 [Show in viewers] checkbox
Select this checkbox to use presets in the
viewer. When the [Home Position] is selected in
(7), this function is grayed out.
(10)-2 Camera Parameter
Enter the center angle of the desired angle in
[Pan] and [Tilt]. In [Zoom], enter the view angle.
• Camera Angle
[Pan]...... Set the pan position of the camera.
[Tilt] ....... Set the tilt position of the camera.
[Zoom]... Set the viewing angle of the camera.
• [BLC] (Back Light Compensation)
Select [OFF] or [ON] for the BLC setting of the
camera.
The display is grayed out if [Smart Shade
Control] is set to [Auto].
•[Smart Shade Control]
Select [OFF], a level from [1] (Mild) to [7]
(Strong) or [Auto] for the smart shade control
setting of the camera. (p. 140)
• [Haze Compensation]
Select [Disable], one of 7 levels from [1] (Mild)
to [7] (Strong), or [Auto] for the haze
compensation of the camera (p. 140).
(1)
(19)(4)(5) (20)
(18)
(17)
(11)
(10)
(10)-1
(3)(2)
(6) (12)
(14)
(16)
(13)
(15)
(7)
(8)
(9)
(10)-2
96
• [Focus Mode]
Select [Auto], [Manual], or [Fixed at infinity] for
the focus mode of the camera. (p. 140)
• [White Balance]
Set the white balance of the camera to [Auto]
or according to the light source of the
condition in which it is used. For details on
light sources, see p. 45.
• [R Gain], [B Gain]
If white balance is set to [Manual], set the
respective gains to a value between 0 and
1023.
(11)[Get camera info]
Load the current camera angle and other settings of
the image display area to reflect them in the
panorama screen and camera parameter settings.
(12)[Full Image]
Displays the full video obtained from the camera. A
preset preview frame (yellow) reflecting the preset
settings is shown. If you drag to resize or move the
frame, the new frame is reflected in the preset
settings.
(13)[Update Image]
Load the full video from the current camera to update
the video.
(14)[Show in viewers] checkbox
Select this checkbox to use presets in the viewer.
When home position is selected in (8), this function is
grayed out.
(15)Camera Parameters
Displays the values for the pan and tilt positions and
zoom viewing angle in accordance with the size and
position of the preset preview frame on [Full Image].
(16)[Get Digital PTZ Info]
Load the current crop position of the video display
area to reflect it in the preset preview frame in [Full
Image] and the camera parameters.
(17)[Preview settings]
Preview camera parameter values that are being
edited, in the video display area.
(18)[Clear settings]
Delete the settings for the preset selected.
(19)[Restore settings]
Clear the settings you have specified on the screen of
the tool and restore the settings saved in the camera.
(20)[Save settings]
Save the edited preset settings in the camera.
If presets have been set, be sure to save the settings
by clicking [Save settings].
Setting the Preset
Select presets or home position as needed for the
operating environment or desired objectives. A preset can
be set in the following ways.
Note
The number of presets you can register are as follows.
– Maximum 64
– Maximum 20
Setting from Camera Angle in the Video
Display Area
Be sure to enter the preset name.
Use the preview frame of the panorama
screen to set presets
Use the preview frame of the panorama screen to set
presets.
Be sure to enter the preset name.
1Select the preset you want to set from the [Home
Position/Preset] selection box, and then fill the [Preset
Name]
field
.
2Click the [Obtain/Release Camera Control] button to
obtain the control privileges of the
camera
.
3Operate the camera from the video display area,
set
it
to the desired position and
click
[Quick Registration].
1
Select the preset you want to set from the [Home
Position/Preset] selection box, and then fill the [Preset
Name] field.
Preset Setting Tool
97
4
Admin Tools
If you click on the panorama screen, the preview
frame will move to center on the clicked point.
The settings are reflected in the video display area.
If you previewed incorrect settings, etc., and want to
restore the settings registered in the camera, click
[Restore settings].
Using the Digital PTZ Function to Set Presets
Use the Digital PTZ function to set part of the area that can
be captured by the camera as a preset.
Be sure to enter the preset name.
If you click on the full video, the preview frame will
move to center on the clicked position.
The settings are reflected in the video display area.
If you previewed incorrect settings, etc., and want to
restore the settings registered in the camera, click
[Restore settings].
Note
Digital PTZ is a function for transmitting only the specified part of
a camera video. Therefore, this function reduces the load on the
network.
2
Click [Detailed Settings] and select the [Show in
viewers] checkbox.
3Drag to move or resize the preset preview frame
(yellow) shown on the panorama screen to set the
preset
.
4Click [Preview settings].
5Click [Save settings]
.
1Select the preset you want to set from the [Home
Position/Preset] selection box, and then fill in the
[Preset Name] field.
2Select the [Show in viewers] checkbox.
3Change the position or size of the preset preview
frame (yellow) displayed on [Full Image] to set the
preset position.
4Click [Preview settings].
5Click [Save settings].
98
Specifying Detailed Settings
If you want to fine-tune the camera angle or to adjust the
video, etc., click [Detailed Settings] and specify the
detailed settings before saving the preset settings in the
camera.
The camera parameters in the video display area are
loaded to [Detailed Settings].
The settings are reflected in the preview frame on the
panorama screen and the video display area.
If you previewed incorrect settings, etc., and want to
restore the settings registered in the camera, click
[Restore settings].
Note
• Changes to preset settings are not reflected in already
connected viewers.
• You can disable presets in the viewer by clearing the [Show in
viewers] checkbox under [Detailed settings].
• The [BLC] is not available if [Smart Shade Control] is set to
[Auto].
• If you set [Smart Shade Control] to [Auto] or [1] to [7], [Haze
Compensation] is set to [Disable].
• If you set [Haze Compensation] to [Auto] or [1] to [7], [Smart
Shade Control] is set to [Disable].
1Select the [Show in viewers] checkbox.
2
Click [Get camera info].
3Fine-tune the camera angle and adjust the video
quality with focus (VB-S30D only) or smart shade
control while checking the video.
4Click [Preview settings].
5Click [Save settings].
Important
• To use presets in the viewer, select the [Show in viewers]
checkbox.
• Set presets again if the camera mounting conditions have
been changed.
• Check preset settings again if the [Video] > [Video Size Set]
settings on the Setting page have been changed.
• If [Manual] is selected in [Focus Mode], manually
adjust the focus while checking the actual video in the video
display area. After the focus has been adjusted, set the focus
using [Get camera info]. Click [Save settings] to save the
focus settings.
Preset Setting Tool
99
4
Admin Tools
Preset Tour
Set a preset tour whereby the camera tours and monitors
the multiple presets currently set.
[Preset Tour] Tab Display Screen
(1) [Preset Tour] selection box.
Select when you want to perform a preset tour from
the following options.
[Not used]
Preset tour is not performed.
[For Viewers]
Preset tour is performed when a camera is
connected via the VB Viewer, etc.
[Always]
Preset tour is always performed.
(2) [Set Preset Tour Time] checkbox
This setting is enabled when [For Viewers] or [Always]
is selected in (1). Select the checkbox to configure a
preset tour at a predetermined time, and enter the
start time and stop time for the preset tour.
(3) Tour schedule list
A list of presets set for preset tour.
(4) [Up] / [Down]
Select preset in the list and click [Up] or [Down] to
change sequence of the tour schedule list. Presets
tours are performed in order from the top of the list.
(5) [Delete]
Delete the preset selected from the tour schedule list.
(6) [Preset] selection box
Select the preset you want to add to the tour schedule
list.
(7) [Preview]
The camera angle switches to the selected preset,
and the new angle can be checked in the video
display area.
(8) [Pause (sec)]
Set the time at which the camera stops at the preset
position.
You can set between 1 and 900 seconds in 1-second
increments.
(9) [Add]
Add the preset to the tour schedule list.
(10)[Change]
Change the speed or pause time for presets selected
from the tour schedule list.
Note
• Preset tour is not performed while the camera is being
controlled with viewers, Admin Tools, etc.
• Preset tour is not performed when control privileges are
obtained by RM-Lite.
Setting the Preset Tour
Select [For Viewers] or [Always].
Setting the preset tour time
Select the [Set Preset Tour Time] checkbox.
Enter values for [Start Time] and [End Time] to set the
preset tour time.
The preset is registered in the tour schedule list. Up to
20 presets can be registered.
In [Pause (sec)], you can enter the number of
seconds for the camera to remain stationary at the
preset position.
When [Preview] is clicked, the camera angle switches
to this preset, and the new angle can be checked in
the video display area.
When you want to delete changes made to the tour
schedule list and restore the settings registered in the
camera, click [Restore settings].
(1)
(5)
(7)
(10)
(2)
(3)
(4)
(6)
(8)
(9)
1Select the touring method from the [Preset Tour]
selection box.
2Select the preset number you want to add to the tour
schedule from the [Preset] selection box, and then
click [Add].
3Select a preset in the tour schedule list, and set the
preset operation.
4Click [Change].
100
When you complete setting the tour schedule list, click
[Save settings]. The settings are saved in the camera.
Note
The home position cannot be added to the tour schedule list.
5Click [Save settings].
101
Admin Tools
4
This tool is used to set intelligent functions that perform uploads, notify the viewer, etc., if a change has occurred in the
captured video due to movement of a subject.
The intelligent functions can perform the following 6 types of detection. Use detection types that best serve your needs.
Intelligent Function Setting Tool
Admin Viewer
RM Viewer
Passing Detection
E-mail notification
Network
Video recording on
storage server
Upload to FTP
server/HTTP
server
Volume Detection
Moving Object Detection
Removed Object Detection
Abandoned Object Detection
Camera
Camera Tampering Detection
Moving Object Detection
Detect moving objects. This function can be used to detect visitors or suspicious individuals.
Moving object detection is triggered when moving objects are inside the detection area.
Moving object enters/
leaves area.
Background Video Generated
Detected
Change in Designated Area Analysis Moving Object Detected
Detection begins when a
moving object enters the
designated area.
102
Abandoned Object Detection
Detect objects that are carried in and abandoned for a certain amount of time. This function
can be used to detect objects that have been left.
Abandoned object detection is triggered when an object is left in the detection area for a
specified duration.
Object abandoned.
Background Video Generated
Detected
Change in Designated Area Analysis Abandoned Object Detected
The object is abandoned
and detection begins
after set time.
Removed Object Detection
Detect objects that are being removed. This function can be used to detect actions such as
taking away valuables.
Removed object detection is triggered when an object is removed from the detection area
for a specified duration.
Removing an object.
Background Video Generated
Detected
Change in Designated Area Analysis Object Removal Detected
The picture (object) is
removed and detection
begins after set time.
Camera Tampering Detection
Detect when the capture is being obstructed. This function can be used to detect when the
camera orientation is changed or the video display is obstructed with spray, etc.
Camera tampering detection is triggered when an area exceeding the set ratio is
continuously altered by an object, etc.
Tampering detected.
Background Video Generated
Detected
Video Area Changes Analysis Camera Tampering Detected
Detection begins when a portion
of the video that exceeds the set
ratio is continuously altered.
Intelligent Function Setting Tool
103
4
Admin Tools
Caution
Notes on Use of This Camera
The intelligent functions are not suitable for applications where high reliability is required. If constant and maximum
reliability is required for surveillance it is not recommended that you use this function. Canon shall assume no
liability for any accident, loss or other undesirable outcomes resulting from intelligent function operations.
Passing Detection
Detect when a person or moving object crosses a specified line.
It determines that an object is passing when the decision point of the object detection frame
crosses a detection line.
Passing detected.
Background Video Generated
Detected
Video Area Changes
Analysis
Passing Detected
Detection begins when the
decision point crosses the
specified detection line.
Volume Detection
Detect specified volume levels. For setting details, see “Chapter 3Setting Page” [Event] >
[Volume Detection] (p. 58).
104
Display Screen of Intelligent Function Setting Tool
(1) Video Display Area
The video currently captured by the camera is shown.
Detection areas are shown in translucently colored
frames (rectangular or polygonal) and the detection
line is shown as a translucently colored polygonal line
or line segment. Also, subjects for which movement
has been detected are shown in a detection block
and detection frame.
Pan, tilt, and zoom operations are the same as in the
Admin Viewer. For details, see “How to Operate the
Viewer” (p. 127).
However, when the (11) [Lock camera position]
checkbox is selected, the camera is fixed at a preset
position and cannot perform pan, tilt, and zoom
operations.
(2) [Switch Mouse Operation] button
Each time this button is clicked, the button switches
between and , and the mouse operation in the
video display area changes.
When the button is set to , detection areas can be
created/resized/moved. While in this mode, the
camera orientation will not change.
When the button is set to and the (11) [Lock
camera position] checkbox is not selected, pan, tilt,
and other operations can be performed.
(3) [Switch Screen Size] button
Each time this button is clicked, the screen size of the
video display area switches between “480 x 270” and
“960 x 540”.
(4) [BLC] button
This button turns on/off backlight compensation. This
control is effective when the video is dark due to
backlight.
(5) [Obtain/Release Camera Control] button
This button is used to obtain/release the camera
control privileges. For details, see “Obtaining Camera
Control Privileges” (p. 129). If camera control
privileges have not yet been obtained elsewhere,
such as in the Admin Viewer, the control privileges will
be obtained the moment the Intelligent Function
Setting Tool is launched.
(6) [Control for Admin] button
Show the Control for Admin Panel (p. 121).
(7) [Event Display] button
Show the event display panel (p. 112).
(8) [Display Options]
Select the [Detection Area/Line] or [Detection Results]
you want to show in the video display area from the
following items.
•[Selected Detection Settings Only]
Show the detection areas/lines or detection results
only for those detection settings selected in the
[Detection Setting List].
• [All Detection Settings]
Show the detection areas/lines or detection results
for all detection settings in the [Detection Setting
List].
• [Detection Settings of the Same Type]
Show the detection areas/lines or detection results
for the same type of detection settings as those
selected in the [Detection Setting List].
• [Do not display]
No detection areas/lines or detection results are
shown.
(9) [Restart intelligent function]
If the background video has changed while you were
specifying settings or detection results are not as set,
etc., click this button to restart the intelligent function.
(1)
(19) (20)(5)
(8)
(7)
(9)
(10)
(12)
(13)
(14)
(18)
(15)
(16)
(17)
(11)
(2) (3)
(4)(6)
Intelligent Function Setting Tool
105
4
Admin Tools
If camera control privileges are not obtained, this
function is grayed out.
(10)[Detection Settings]
Show the [Detection Settings] dialog box (p. 112).
This dialog box allows you to reduce the effects of
lighting changes.
(11)[Lock camera position] checkbox
Select this checkbox to move the camera position to a
preset position selected from the preset selection box
and lock it there. Lock the camera position when
specifying detection settings to obtain a correct
detection result.
If camera control privileges are not obtained or if
preset positions are not set, this function is grayed
out.
(12)Camera position selection box
Select the camera position from the view restriction
presets or the home position. Use the Preset Setting
Tool to set presets or the home position (p. 94).
If camera control privileges are not obtained, the
[Lock camera position] checkbox is not selected, or if
the preset position is not set within the view restriction
area, this function is grayed out.
(13)[Detection Setting List]
A list with the specified detection settings is shown.
(14)[Add]
The [New Detection Settings] dialog box is shown and
detection settings can be added.
(15)[Delete]
Delete detection settings selected from the [Detection
Setting List].
(16)[Detection Setting Number], [Detection Type]
The detection setting numbers and detection types
selected from the [Detection Setting List] are shown.
(17)[Enable these detection settings] checkbox
Select this checkbox to enable the detection settings
that are selected in the [Detection Setting List].
(18)[Detection Criteria] tab, [Event] tab
Switch between the Detection Criteria and Event tabs.
• [Detection Criteria]
Specify detection settings name, detection area/line,
and detection criteria (p. 107).
•[Event]
Specify operations to be performed when events
occur (p. 108).
(19)[Restore settings]
Clear the settings you have specified on the screen of
the tool and restore the settings saved in the camera.
(20)[Save settings]
Save the edited detection settings in the camera.
After the detection settings have been specified, be
sure to save the settings in the camera by clicking
[Save settings].
Flow of Intelligent Function Setting
The intelligent functions are set according to the
procedure below. For details on the setting method, see
each setting page.
Camera Position Settings
For details on the preset setting method, see “Preset
Setting Tool” (p. 94).
This selects [Lock camera position] in the Intelligent
Function Setting Tool.
If [No] is clicked, select [Lock camera position].
Important
It takes tens of seconds for the intelligent function to restart. No
detection is performed while restarting.
Important
Presets that were set with the Preset Setting Tool cannot be
used for the settings of intelligent functions.
1Register the camera angle as a preset using the
Preset Setting Tool.
Important
It is strongly recommended that you preset the camera angle in
advance and lock the camera at a preset position with the
Intelligent Function Setting Tool. An angle of view that captures
the target object up close is also recommended.
2Launch the Intelligent Function Setting Tool.
3Click [Yes].
4Select a preset.
106
Intelligent Function Settings
When you click [Add] in the [Detection Setting List],
the [New Detection Settings] dialog box is displayed.
Set the [Detection Setting Number] and [Detection
Type] of the detection setting you want to add, and
then click [OK].
Up to 15 different detection settings can be
registered.
(1) [Detection Setting Number]
Specify a detection setting number from 1 to 15 for the
detection area you want to set.
(2) [Detection Type]
Select detection types that suit your purpose from
[Moving Object Detection], [Abandoned Object
Detection], [Removed Object Detection], [Camera
Tampering Detection], or [Passing Detection]. For
details on detection types, see p. 101.
To enable detection settings, select [Enable these
detection settings].
Clear this checkbox to disable a setting.
Set detection criteria while operating the camera and
checking the video in the video display area.
Click [Save settings] to save the settings in the
camera.
You can check the detection status of the specified
detection settings in the event display panel (p. 144).
1Add detection settings.
2Enable Detection Settings.
3Set detection criteria ([Detection Criteria] tab p. 107).
4Set operations to be performed when a change in a
subject is detected ([Event] tab p. 108).
5Save the detection settings in the camera.
6Check the detection result.
(1)
(2)
Important
Notes on intelligent function settings and operation
• When setting intelligent function, do an actual detection test
to confirm that detection will be performed correctly.
• When the entire screen is exposed to sudden changes in
brightness, detection may not be performed as intended for
up to 5 minutes.
• If the display switches between Day mode and Night mode,
[Restarting intelligent function. Please wait.] is shown and
intelligent function will restart. Detection will not be performed
while intelligent function is restarting.
• If the camera is operated during intelligent function setting or
operation, [Restarting intelligent function. Please wait.] is
shown and intelligent function will restart. Detection will not
be performed while intelligent function is restarting.
• If [Video] > [Video Size Set] on the Setting page is changed,
be sure to change the preset position setting (VB-S30D/VB-
S31D only) and intelligent function settings, and check the
operation. The intelligent function may not operate,
depending on the settings.
• Set intelligent function again if the angle of view is changed
through camera operation, or the camera position of a preset
or home position is changed using Preset Setting Tool.
• If an [Enable] detection setting exists under [Status] in the
[Detection Setting List] while the camera position is locked,
control privileges cannot be obtained by VB Viewer or RM
Viewer. Also, the custom settings automatic control will no
longer run.
• When using presets registered in digital zoom range, the
registered camera positions may not be reproduced with
high accuracy. It is recommended that you use presets
registered in the optical zoom range for the Intelligent
Function.
Difficult-to-detect Subjects
• Objects or portions where there is little contrast in color or
brightness with the background may not be detected.
• Small objects and changes on the screen may not be
detected.
• Partial or entire changes in light on the screen may trigger
detection.
• If multiple objects overlap, the detection status may change.
In particular, passing may not be detected or may be
detected at the wrong timing.
Intelligent Function Setting Tool
107
4
Admin Tools
Setting Intelligent Function Detection
Settings
Setting Detection Criteria ([Detection
Criteria] tab)
Set detection criteria while operating the camera and
checking the video in the video display area.
(1) [Detection Settings Name]
You can use up to 64 characters in a detection setting
name. Be sure to enter a single-byte alphanumeric
detection setting name.
In a [Detection Settings Name], ASCII characters
(spaces or printable characters) can be used.
(2) [Area Shape]
Select [Rectangular] or [Polygonal] for the shape of
detection areas you want to set in the video display
area.
For details on detection area setting operations, see
“Setting Detection Areas” (p. 108).
[Quick setting]
The detection area is drawn automatically when the
detection criteria is [Removed Object Detection].
[Clear]
If the [Area Shape] is [Polygonal], the detection area
set in the video display area is deleted.
(3) [Display Color]
Choose the color of the detection setting. The color
selected here becomes the display color of the
detection area/line in the video display area.
(4) [Object Size (%)] [Change Ratio (%)] [Duration (Sec)]
Set the lower limit for the size, change ratio, and
judgment time for the set detection area to trigger
detection. If the value set here is exceeded, “Detected”
mode is triggered.
Click the text box to enter a value directly, or specify a
value using the slider.
For details on the setting method, see “Setting
Detection Criteria per Detection Type” (p. 109).
(5) [Clear detection line]
Clears the detection line set in the video display area.
(6) [Passing Direction]
Select the passing direction of a moving object
relative to the detection line.
(7) [Decision Point]
Select the point of a moving object that will be used as
criteria for passing detection when a moving object
crosses a detection line.
(1)
(3)
(4)
(2)
[Detection Criteria] tab
(1)
(3)
(6)
(7)
(5)
(4)
Passing detection
Moving object detection, abandoned object
detection, camera tampering detection
Removed object detection
(1)
(3)
(4)
(2)
Video Display Area
Detection Area
Important
It is recommended that the detection criteria are set in a
condition as close as possible to the condition in which the
camera is actually used. Perform a detection test in advance to
make sure that the detection frame continues to be displayed
for a subject targeted for passing detection.
108
Setting Event Operations ([Event] tab)
Set operations to be performed upon detection of
changes in a subject.
[Event] tab
(1) Specify the operation timing. (Multiple checkboxes can
be selected.)
[ON Event Operation] checkbox
When selected, the operations set in (2) [E-mail
Notification] and [Video Record] are performed the
moment detected mode is triggered to ON.
[OFF Event Operation] checkbox
When selected, the operations set in (2) [E-mail
Notification] and [Video Record] are performed the
moment detected mode is triggered to OFF.
[Detected mode Operation] checkbox
When selected, the operations set in (2) [E-mail
Notification] and [Video Record] are performed for as
long as detected mode is active.
(2) Specify the event operation. (Multiple checkboxes can
be selected.)
[E-mail Notification] checkbox
When selected, e-mail notification is performed at the
timing set in (1).
[E-mail Notification] must be set in
advance under [Upload] in the Setting page
(p. 55).
[Video Record] checkbox
When selected, video record is performed at the
timing set in (1). [Video Record Action] must be set in
advance under [Event] in the Setting page (p. 58).
(3) Operation of External Device Output
[External Device Output for ON Event] checkbox
Select this checkbox for enabling external device
output at an ON event and select operation (active or
inactive).
[External Device Output for OFF Event] checkbox
Select this checkbox for enabling external device
output at an OFF event and select operation (active or
inactive).
Setting Detection Areas
Set detection areas in the video display area.
Setting a [Rectangular] detection area
A rectangle is shown in the video display area. Move or
resize that rectangle to set a detection area.
Setting a [Polygonal] detection area
Specify polygonal areas with a maximum of 32 angles.
Click in the video display area to form the polygon point
by point. Click on a previously set point to complete the
polygon and set the enclosed area as the detection area.
The set area can also be moved by dragging it.
Setting a detection area using [Quick setting]
[Quick setting] can be configured for [Removed Object
Detection] only.
The background video is created.
An outline for the detection object is drawn using a
polygon with up to 32 points.
If there are multiple detection objects, the area is
drawn around the largest object.
(1)
(3)
(2)
1Temporarily remove the object whose removal you
want to detect from the video display area.
2Click [Restart intelligent function].
3Replace the object whose removal you want to detect
in its original position.
4Click [Quick setting].
Intelligent Function Setting Tool
109
4
Admin Tools
Note
• Drag the square marks (■) at each angle to change the shape
of the polygon.
• Click [Clear] to delete the polygonal detection area.
• The camera tampering detection area cannot be changed.
Changing a [Rectangular] detection area into a [Polygonal]
shape or changing a [Polygonal] detection area into a
[Rectangular] shape
Changing the shape of the detection areas already set
deletes that area and switches to a new drawing setting.
Setting the Detection Line
Use the video display area to set the detection line.
Specify a detection line consisting of a polygonal line with
a maximum of 32 angles.
In the video display area, click the start point of the
detection line and then click the end point. To create a
detection line consisting of polygonal line, click each
angle in the polygonal line in order.
To confirm a detection line, click any of the already set
angles.
The angles in a confirmed detection line can be dragged
to change the shape of a detection line and lines between
angles can be dragged to change the position of the
detection line.
Note
• Drag the square marks (■) at each angle to change the shape
of the detection line.
• Click [Clear detection line] to delete a detection line.
Setting Detection Criteria per Detection Type
Specify different detection criteria for each detection type.
Detect criteria for [Moving Object Detection]
Set detection areas where you want to detect moving
objects.
For [Object Size (%)], enter a value or move the slider to
set the ratio of the size of an object moving in the
detection area to the size of the detection area.
When the ratio of an area where the camera has detected
a moving object exceeds the value set for [Object Size
(%)], detected mode is triggered to ON.
When [Object Size (%)] is changed, an indicator frame
showing the size of the object is displayed for 1 second in
the center of the video display area, allowing specification
of the settings while checking the size ratio.
Any moving objects detected are shown with contour lines.
If a moving object is smaller than [Object Size (%)], its
contour lines are white. If the moving object is larger than
[Object Size (%)], its contour lines take on the same color
as the detection area, indicating that “detection” mode has
been triggered to ON.
Note
If an object is placed in or removed from the moving object
detection area, “detected” mode will be triggered for Moving
Object Detection.
Detect criteria for [Abandoned Object Detection]
Set areas where you want to detect abandoned objects as
detection areas.
5Click [Restart intelligent function] again.
Configured detection
area
Object size indicator
Detection area
Contour lines of a
detected moving
object
110
[Object Size (%)]
Enter a value or move the slider to set the ratio of the size
of an object that was left behind in the detection area to
the size of the detection area.
When [Object Size (%)] is changed, an indicator frame
representing the area of the object is displayed for 1
second in the center of the video display area. This allows
you to check the size ratio of the abandoned object
detection area while specifying the [Object Size (%)]
setting.
[Duration (Sec)]
Set the time that must elapse after an object has been left.
If both the values for [Object Size (%)] and [Duration
(Sec)] are exceeded, detection mode is triggered to ON.
Any moving objects detected are shown with contour lines.
If [Object Size (%)] and [Duration (Sec)] are not exceeded,
contour lines are white. When all detection criteria are met,
contour lines take on the same color as the detection area
and “detected” mode is triggered to ON.
Detect criteria for [Removed Object Detection]
Set detection areas for objects whose removal you want to
detect. If there are multiple objects for which you want to
enable detection, be sure to configure Removed Object
Detection for each object.
For [Duration (Sec)], set the time that must elapse after
the object has been taken away. Detected mode will be
triggered to ON when an object is taken away from the
detection area for a period longer than the set [Duration
(Sec)].
Any moving objects detected are shown with contour
lines. As long as [Duration (Sec)] has not elapsed,
contour lines are white. When [Duration (Sec)] has
elapsed, contour lines take on the same color as the
detection area, indicating that “detected” mode has been
triggered to ON.
Detect criteria for [Camera Tampering Detection]
For [Camera Tampering Detection], the entire video
display area becomes the detection area. Detected mode
will be triggered to ON when the video changes over an
area exceeding the ratio set in [Change Ratio (%)].
When [Change Ratio (%)] is changed, an indicator frame
representing the percentage of the entire video display
area is displayed for 1 second in the center of the area,
allowing you to check while specifying the setting.
Object size indicator
Detection area
Contour of abandoned
object
Important
Set detection areas for removed object detection so that they
precisely match the contours of the object in question.
Influence from the target object’s shadow or adjacent objects
may result in the target object being recognized as larger than
actual and will not trigger Removed Object Detection. In such
cases, reconfigure the detection area to outline the recognized
target object. Alternatively, use [Quick setting] (p. 108).
Removed object
detected
Contour of removed
object
Change ratio indicator
Intelligent Function Setting Tool
111
4
Admin Tools
Any moving objects detected are shown with contour
lines. If it is smaller than [Change Ratio (%)], contour lines
are white. If the video is changed for an area larger than
[Change Ratio (%)], contour lines take on the same color
as the detection area, indicating that “detected” mode
has been triggered to ON.
Note
Detection will not be possible for three seconds after the change
ratio is modified when camera tampering detection is selected, or
when switching into camera tampering detection from another
detection mode.
Detect criteria for [Passing Detection]
Set the passing direction and decision point of the moving
object for the detection line that the moving object will
cross.
[Passing Direction]
Select the direction for moving objects to pass the
detection line. When an object that moves in the selected
direction passes the detection line, “line crossed” is
detected.
A preview display shows the selected passing direction
on the detection line in the video display area.
[Decision Point]
Select the decision point of a moving object in
accordance with a detection line. When a decision point
selected here crosses the detection line, “line crossed” is
detected. In the video display area, a cross mark is
displayed to indicate the decision point in the detection
frame.
[Object Size (%)]
Enter or use the slider to set the size ratio of moving
objects for the entire screen.
When a moving object exceeds the value set for [Object
Size (%)], it becomes a passing detection target.
When [Object Size (%)] is changed, an indicator frame
showing the size of the object is displayed for 1 second in
the center of the video display area, allowing specification
of the settings while checking the size ratio.
Note
• A ratio of up to 30% can be set for [Object Size (%)] in passing
detection.
• A passing detection event is notified only when the decision
line is crossed. Take care in setting the operation to be
performed when an event occurs.
Setting by Right-Click Menu
Right-click on the Intelligent Function Setting Tool display
screen to display the menu. There, the following functions
can be used.
[Copy detection area/line]
Copy the detection area/line of the detection setting
selected.
[Paste detection area/line]
Paste the copied detection area/line to the detection
setting selected. It cannot be copied to camera tampering
detection. Pasting a detection line is possible only when
the source and the target both set passing detection.
Contour of camera
tampering object
Important
Perform a detection test in advance to make sure that the
detection frame continues to be displayed for a subject
targeted for passing detection.
Decision point
Detection line
Detection frame
Object size indicator
112
[Clear detection area/line]
Clear the detection area/line of the detection setting
selected. It cannot be cleared in camera tampering
detection.
[Copy detection criteria settings]
Copy the detection criteria of the detection setting
selected.
[Paste detection criteria settings]
Paste the copied detection criteria to the detection setting
selected. Pasting is possible only if the source and the
target are the same detection type.
[Copy event settings]
Copy the event operations of the detection setting
selected.
[Paste event settings]
Paste the copied event operations to the detection setting
selected.
Reducing effects of lighting change
Intelligent functions may not work when the entire screen
is exposed to sudden changes in brightness, for example,
when indoor lights are turned on or off. Changing the
detection settings may reduce this effect.
Note
Since changing [Detection Settings] restarts the intelligent
functions, detection will not be performed during the tens of
seconds that it takes to complete a restart.
Displaying Event Status
Click the [Event Display] button to open the event display
panel and confirm the detection status icon of the
intelligent functions.
This panel displays the same information as [Intelligent
Function (Image Detection)] in the event display panel of
the Admin Viewer. For details, see “Displaying Event
Status” (p. 144).
Note
If the detection setting is not stored in the camera, only the
detection status for the currently selected detection setting is
displayed.
1Click [Detection Settings].
2Select [Reduce effects of lighting change].
3Click [Save settings].
Important
A [Reduce effects of lighting change] setting may not work
depending on the operating environment. Sudden changes in
brightness that persist may also have the same effect. Perform
a detection test to check what will work.
113
Admin Tools
4
This tool lets you view the operating condition log of the camera.
Display Screens of Log Viewer
(1) [Download]
Download log files from this camera or memory cards.
(2) [Reload]
Reload the displayed log file and show the latest logs.
(3) [Previous File]
If there are multiple log files in the camera's internal
memory or memory card, load and display the file
before the currently shown log list.
(4) [Next File]
If there are multiple log files in the internal memory or
memory card, load and display the file after the
currently shown log list.
(5) [Open local file]
Load log files that are saved on a computer to the log
display area.
(6) [Save to local file]
Save the displayed log data as a text file to a
computer.
(7) [Source]
The name of the source from where log files are
loaded is shown.
From the camera's internal memory:
Camera (Internal memory)
From a memory card: Camera (Memory card)
From files saved to a computer:
File name
(8) [Copy]
Copy to the clipboard logs that you have selected on
the log display area.
(9) [Select all]
Select all the logs that are shown in the log display
area.
(10)[Show all logs] checkbox
When selected, all logs, including those without a log
code, are shown.
(11)Log display area
The content of log files downloaded from the camera,
memory card, or computer is shown.
(12)[Log Type]
Select log types you want to show using the filter
function.
[Not specified]:
Select to show all log types.
[Specify type]:
To specify the log type, select the level ([Error],
[Warning], [Information]) and output module
([Application], [HTTP Server], [System]) of the log.
Multiple checkboxes can be selected.
[Specify code]:
Logs matching the entered log code are shown.
Log Viewer
(1)
(11)
(9)
(8)
(7)
(17) (18)
(2) (3) (4) (5) (6)
(12)
(10)
(13)
(14)
(15)
(16)
114
(13)[Date & Time]
Set the date and time of the log you want to show
using the filter function.
Select the [Specify start date & time] or [Specify end
date & time] checkbox to set the date and time.
(14)[Apply filter]
Show the filtered logs in the log display area.
(15)[Search for]
Enter the character string for which you want to
search.
(16)[Match case] checkbox
Specify whether or not to enable case sensitivity in
search commands. When selected, character strings
perfectly matching the case in the [Search for] field
are searched.
(17)[Previous]/[Next]
Click [Next] to move down and [Previous] to move up
in the search results for (18) [Search].
(18)[Search]
Search logs containing the character string searched
in the displayed log list and display them.
Note
Logs cannot be deleted in the Log viewer.
Downloading Log Files
When Log Viewer is launched, the latest log files will be
downloaded and displayed automatically.
To download a new log file list, click [Download]. A
[Download] dialog box is shown where you can select
[Internal memory] or [Memory Card] as a download
source.
When the list has been downloaded, a dialog box
showing the log file list opens. Select the log file you want
to view and click [Download], and the selected log file will
be downloaded.
How to View Logs
The log contains the following information.
•Code
For the log code, see “List of Log Messages” (p. 154).
The log code is shown together with one of three icons
corresponding to the applicable level.
If the log has no log code, no icon is shown.
•Date & Time
The date and time at which the log was generated.
•Message
A message regarding the log.
Note
On the control panel of Windows, the decimal point in a value is
always indicated by “.” regardless of the settings of [Region and
Language]. Also, the date is shown in the “yyyy/mm/dd” or “mm/
dd” format, while the time is shown in the “hh:mm:ss” format. (y,
m, d, h, m, and s indicate year, month, day, hour, minute, and
second, respectively)
Information Level
Warning LevelError Level
Log Viewer
115
4
Admin Tools
Saving a Log to a File/Opening a Saved Log
How to Save
Click [Save to local file] and save using the [Save As]
dialog box.
How to View
Click [Open local file] and select a log file using the
[Open] dialog box.
Copying/Searching Logs
How to Copy
Click to select the log you want to copy, and then click
[Copy].
How to Search
Enter the character string for which you want to search in
[Search for] and click [Search].
If the searched log is found, it is shown as selected.
Click [Previous] or [Next] to search the log above or
below. Lines of logs found are shown as selected.
Showing All Logs
Select the [Show all logs] checkbox.
When selected, even logs without a log code are shown if
[Not specified] is selected for the log type [Filter].
Showing Filtered Logs
You can filter logs by type, code and date & time to show
only the necessary information.
Set the following conditions and click [Apply filter] to show
only the logs matching the specified conditions.
[Log Type]
Select the [Specify type] or [Specify code] checkbox to
filter logs by type. If you do not want to filter logs by type,
select [Not specified].
• Specify type
Specify the log level
Select [Error], [Warning] or [Information] for the level of
logs to be shown.
Specify log output module
Select [Application], [HTTP Server] or [System] for the
output source module whose logs will be displayed.
• Specify code
Specify the log code. Only logs whose code contains
the entered characters are shown. If “A0” is entered,
for example, logs starting with “A0” are displayed.
[Date & Time]
•[Specify start date & time] checkbox
When this checkbox is selected and a date and time
are entered, logs generated on or after the specified
date and time are shown.
•[Specify end date & time] checkbox
When this checkbox is selected and a date and time
are entered, logs generated on or before the specified
date and time are shown.
Note
[Application], [HTTP Server], and [System] support the List of
Log Messages (p. 154).
Important
Logs saved in the camera's internal memory are cleared when
you perform [Maintenance] > [Restore Default Settings] and
[Reboot], or press the reset switch on the camera.
116
This utility manages video recorded on a memory card. It allows you to play back recorded video and download it to a
computer, display a video list or perform filtering.
Display Screens of Recorded Video Utility
(1) [Refresh Video List]
Update the video list to the current state.
(2) [Refresh Download Status]
Update video download status to the current state.
(3) [Memory Card Details]
Displays the dialog box for details about the memory
card.
(4) [Number of Videos]
Displays the number of videos in the video list.
(5) [Select All]
Select all video in the video list.
(6) [Export to mov format]
Export the [Downloaded] video selected in the video
list to a mov format video file.
(7) [Enable H.264 playback] checkbox
Select to play H.264 video in the [Playback Videos]
area (p. 119).
(8) Video List
Displays a list of videos recorded on a memory card
and downloaded to a computer.
(9) [Delete from Camera]
Delete videos selected in the video list from the
memory card.
(10)[Download]
Download videos selected in the video list to a
computer.
(11)[Download to]
Specify the folder that videos are downloaded to.
(12)[Filter]
Click [Filter] to open or close the filter area. Sets
criteria to narrow down the number of items displayed
in the video list (p. 117).
(13)[Playback Videos] Area
Plays videos selected in the video list (p. 118).
Recorded Video Utility
(1)
(12)
(8)
(11)
(10)
(9)
(5)
(6)
(4)
(2) (3) (7)
(13)
Recorded Video Utility
117
4
Admin Tools
Confirming Recorded Video
The video list displays the following information:
[Date & Time]
Displays the date and time of a video recording.
[Format]
Displays the format of a recorded video ([JPEG] or
[H.264]).
[Recording Type]
Displays the type of recorded video ([Upload],
[Recording-Mode Stream], [Manual], [Timer], [Event]).
[Upload] indicates videos that failed to upload from the
camera, and [Recording-Mode Stream] indicates videos
where video transmission failed when using RM
recording-mode stream.
[Video in Camera]
Displays whether or not any video remains on a memory
card. When video has been deleted from a memory card
after downloading it, this indicator displays [No].
[Download Status]
Displays download status of video ([Downloaded], [Not
Downloaded], [Partially Downloaded]).
Note
Clicking a header in each column sorts the video list.
Refreshing Video List
Click [Refresh Video List] to update the video list to the
current state.
Click [Refresh Download Status] to update download
status of the video list to the current state.
Selecting Videos
Click a video to select it. Use the Ctrl key or the Shift key
while clicking to select multiple videos.
Click [Select All] to select all videos on the list.
Narrowing Down the Number of Videos
Use [Filter] to narrow down the number of videos that
appear in the video list to the ones you need.
Set the following conditions and click [Apply filter] to show
only the videos matching the specified conditions.
[Date & Time]
•[Specify start date & time] checkbox
When this checkbox is selected and a date and time
are entered, videos recorded on or after the specified
date and time are shown.
•[Specify end date & time] checkbox
When this checkbox is selected and a date and time
are entered, videos recorded on or before the
specified date and time are shown.
[Video Format]
Select [Specified] and select the checkboxes for the
video format ([JPEG] or [H.264]) (multiple selections
possible).
[Recording Type]
Select [Specified] and select the checkboxes for the type
of video recording ([Upload], [Recording-Mode Stream],
[Manual], [Timer], [Event]) (multiple selections possible).
[Video in Camera]
Select [Not specified], [Yes] or [No].
[Download Status]
Select [Specified] and select the checkboxes for the
status of video download ([Downloaded], [Not
Downloaded], [Partially Downloaded]) (multiple selections
possible).
118
Downloading Video
Download video recorded on a memory card to a
computer.
Click [Browse] to specify a folder.
The video is downloaded to the specified folder.
Note
When the download folder is changed, the download status of the
files in the download folder prior to the change becomes [Not
Downloaded]. Manually copy the files in the download folder
prior to the change to the new download folder to change their
status to [Downloaded].
Downloaded videos are stored in a folder that is automatically
created within the specified destination folder and named using
the camera IP address (for example, [192.168.100.1]). Quit the
Recorded Video Utility before using explorer to browse the
folders before and after the change and copy the contents of the
folder with the same name as the camera IP address.
After copying, start up the Recorded Video Utility, click [Refresh
Download Status] and the manually copied files will appear in the
video list.
For details on the folder configuration and file naming rules for
the download location, see “Directory Structure for Data
Downloaded with Recorded Video Utility” (p. 148).
Exporting to Video Files That Can Be
Played Back
Videos downloaded from a memory card to a computer
can be exported to video files that can be played back on
a computer.
For H.264 video, subdivided files are merged into a single
file.
Videos whose [Download Status] is labeled
[Downloaded] in the video list can be exported.
The [Browse For Folder] dialog box appears.
The video is exported.
Note
Use the default MOV file player of your operating system or other
media players to play back the exported MOV files. Playback is
not guaranteed on all media players.
Playing Back Videos
Videos selected in the video list can be played back in the
[Playback Videos] area.
The appearance and operations of the [Playback Videos]
area differ depending on the selected video format.
For JPEG
[Recording Date & Time]
Displays the date and time of video frames that are being
displayed.
[Playback Frame No.]
Displays frame numbers and total number of video frames
that are being displayed.
[Playback Interval]
•[Real Time]
JPEG video is played back in real time interval
according to the recording time. The preceding JPEG
video appears in an empty frame.
• [Equal Interval]
JPEG video is played back at a 1-second interval.
Note
• [Real Time] can be selected only for playback of downloaded
videos.
• [Not Downloaded] or [Partially Downloaded] videos may not be
played back in the order they were recorded.
1Specify the folder to download video to in [Download
to].
2Select a video to download in the video list.
3Click [Download].
Important
Since the Recorded Video Utility processes both files
downloaded to a computer and its original videos recorded on
the memory card, the video list will not display correctly if files
downloaded to a computer are manually deleted. In this case,
click [Refresh Download Status] to refresh status of data
downloaded to a computer.
1Select a video to export in the video list.
2Click [Export to mov format].
3Select a folder to export to and click [OK].
Recorded Video Utility
119
4
Admin Tools
Slider/Playback Control
Drag the slider to change playback position.
The following buttons can also be used for playback.
[Save Playback Frame As]
Video frames that are being played back can be saved as
a separate file.
For H.264
Select the [Enable H.264 playback] checkbox to play
H.264 video in the [Playback Videos] area.
The Software Product License Agreement dialog box
appears. Click [Yes] to accept the terms of the license
agreement. The decoder is downloaded from the camera,
enabling H.264 video playback.
[Recording Date & Time]
Displays the date and time of video frames that are being
displayed.
[Playback File No.]
Displays file numbers and total number of video files that
are being displayed.
Note
• The H.264 video playback interval varies depending on the
download status.
If the download status is [Downloaded], each frame is played
back in real time interval according to the recording time. For
empty frames, the preceding frame is displayed.
If the status is [Not Downloaded] or [Partially Downloaded],
empty frames are skipped upon playback. If a file is played
back while still downloading, playback may momentarily pause
when switching files, depending on the network environment.
• [Not Downloaded] or [Partially Downloaded] videos may not be
played back in the order they were recorded.
Slider/Playback Control
Drag the slider to change playback position.
The following buttons can also be used for playback.
[Save Playback Frame As]
Video frames that are being displayed can be saved as a
separate file.
Clear the [Enable H.264 playback] checkbox to play
H.264 video in an external player.
[Number of downloaded video files]
The number of downloaded files the video consist of is
displayed.
[Playback with External Player]
Start up the external player (Windows Media Player, etc.)
and the selected video is played back.
Button Description
Move to first frame
Move to previous frame
Fast rewind
Playback
Pause
Fast forward
Move to next frame
Move to last frame
Button Description
Move to first frame
Move to previous frame
Playback
Pause
Move to next frame
Move to last frame
120
[Open Video folder]
Open the folder storing the selected video. Double click
the video file in the folder to play it back.
Note
• To play back H.264 videos in an external player, the videos
must be downloaded to a computer (p. 118).
• The downloaded H.264 video file will have the “.mov”
extension.
• When the data size for mov type files is 1 MB or greater, they
are split into several files.
• If mov files are split into several files, only the initial few
seconds of the first file can be played back. To play back the
files in succession, use [Export to mov format] (p. 118).
• Use the default MOV file player of your operating system or
other media players to play back the downloaded MOV files.
Playback is not guaranteed on all media players.
Deleting Videos
You can delete videos from a memory card.
The video is deleted from the camera.
Note
If the selected videos contain [Not Downloaded] videos, a
message prompting you to confirm deletion appears. Click [OK]
to delete the video.
Displaying Memory Card Information
Click [Memory Card Details] to display information on the
memory card inserted in the camera.
1Select a video to delete in the video list.
2Click [Delete from Camera].
121
Admin Tools
4
This panel is used to adjust video from the camera that is
displayed by each Admin Tool. The panel is available to
the Privacy Mask Setting Tool, View Restriction Setting
Tool, Preset Setting Tool and Intelligent Function Setting
Tool.
Using Control for Admin
Click the [Control for Admin] button to display the Control
for Admin Panel.
Opening/Closing Control Items
Clicking the title of a control item will open or close the
setting items.
The Admin Control Panel will appear and you can open
the various control items even without obtaining the
camera control privileges, but the items will be grayed
out.
Operating the Control Items
The panel operates in the same way as Control for Admin
of the Admin Viewer.
[Smart Shade Control]
You can set Smart Shade Control. For details, see “Setting
the Smart Shade Control” (p. 140).
[Haze Compensation]
You can adjust the video if the subject is obscured by
haze. For details, please refer to “Setting the Haze
Compensation” (p. 140).
[Focus]
You can adjust focus. For details, see “Setting the Focus”
(p. 140).
[Exposure]
You can adjust exposure. For details, see “Setting the
Exposure” (p. 141).
Note
The items for the Intelligent Function Setting Tool’s Control for
Admin will be grayed out if the [Lock camera position] checkbox
is selected (p. 105) in the Intelligent Function Setting Tool.
Control for Admin
⇔
122
Chapter 5
Admin Viewer/VB Viewer
❏Differences between the Admin Viewer and the VB Viewer
❏User Authorities and Camera Control Privileges
❏Viewer Startup and Operation
❏Camera Control and Obtaining Camera Control Privileges
❏Admin Viewer Operation and Settings
124
Accessing this viewer via a web browser allows you to display video and operate the camera.
Two types of viewer are available, the Admin Viewer and the VB Viewer.
Major Differences Between the Admin
Viewer and the VB Viewer
• The operable ranges differ between the viewers.
Admin Viewer:
Users can use the administrative control functions,
such as shooting adjustment settings or event
detection display.
VB Viewer:
This viewer is limited to basic video operations for
viewing video.
• Accessible controls are different.
Admin Viewer:
Users with privileged camera control can use this
viewer.
Password authentication is required.
Authorized users must have privileged camera
control assigned by the Administrator beforehand
(p. 62).
VB Viewer:
Users with camera control authority can use this
viewer. You can set the applicable options to
enable/disable authentication, etc.
User Authorities and Camera Control
Privileges
User authorities and their relative camera control
privileges are specified as follows.
* Can be changed: The Administrator can change the
privileges of Authorized Users and Guest Users (p. 62).
The four authorities that can be set for users are privileged
camera control, camera control, video distribution and
audio distribution.
Users must have privileged camera control to use the
Admin Viewer.
Users must have the video distribution authority to display
video using the VB Viewer. To operate the camera using
the VB Viewer, users must also have camera control
authority.
Audio distribution authority is required to receive audio
using the Admin Viewer and the VB Viewer.
Overview of Viewer
Admin Viewer VB Viewer
User
Authority
Camera Control Privileges
Video
Distribution
Audio
Distribution
Privileged
Camera
Control
Camera
Control
Administrator
{{{{
Authorized
user
{
(Can be
changed)
{
(Can be
changed)
{
(Can be
changed)
{
(Can be
changed)
Guest user
×
{
(Can be
changed)
{
(Can be
changed)
{
(Can be
changed)
Overview of Viewer
125
5
Admin Viewer/VB Viewer
[Administrator]
This user is given all authorities. The user name is fixed
to “root”.
The Administrator can launch the Admin Viewer from
the [Admin Viewer] link and the VB Viewer from the [VB
Viewer] link on the top page.
[Authorized User]
Authorized users can launch the Admin Viewer from
the [Admin Viewer] link on the top page if they have
privileged camera control. Authorized users can no
longer launch the Admin Viewer upon losing privileged
camera control. However, they can still launch the VB
Viewer. Launching the VB Viewer can be prohibited by
disabling all authorities of a given authorized user
(p. 62).
[Guest User]
This user can only use the following functions:
Backlight compensation, snapshots, video display,
audio distribution
Pan/tilt/zoom camera control
Digital PTZ
Guest users can launch the VB Viewer from the [VB
Viewer] link on the top page. The Administrator can
completely prohibit all camera access from guest users
by disabling all their authorities.
Note
• The factory default setting gives privileged camera control to
[Authorized User] as well.
• If all guest user authorities are disabled, the user
authentication dialog box will appear when the VB Viewer is
launched. When an authorized user or administrator name and
password are entered, the VB Viewer can be used with
authorized user or administrator authorities, respectively.
Important
• At any time, the [Administrator] can launch the Admin Viewer to
override the camera control privileges of another instance of
the Admin Viewer launched by an [Authorized User]. The
Administrator can retain the camera control privileges, but
doing so prevents authorized users from obtaining camera
control privileges. After viewing the necessary information, the
Administrator should always close the viewer or click [Obtain/
Release Camera Control] to release the control privileges.
• The Admin Viewer launched by the [Administrator] can access
only one camera at a time. While administrator authorities are
used to access the camera from a given computer, access
with administrator authorities from other computers will be not
be granted. In contrast, the camera can be accessed
simultaneously by multiple instances of the Admin Viewer
launched by [Authorized Users] from different computers.
Take note, however, that when controlling the camera, the
control privileges are given to the user who accessed the
camera most recently.
126
Launching the Viewer
Note
You can also launch the Admin Viewer from the Camera
Management Tool. For details, please refer to the “Camera
Management Tool User Manual”.
See “User Authentication” (p. 29) for information on
the user name and password.
The viewer is launched.
Note
In environments without a proxy server, select [Internet options] >
[Connections] tab > [LAN settings] and clear the [Automatically
detect settings] checkbox in Internet Explorer.
Shutting Down the Viewer
Close the web browser in the viewer to shut down.
Connecting from Admin Tools
Only the administrator can connect to this viewer.
(Refer to “Launching the Admin Tools” (p. 82) for
information on launching the Admin Tools.)
Launching the Viewer
Important
The Admin Tools Certificate must be installed on a computer
that is using the Admin Viewer. (p. 26)
1Start the top page of the camera (p. 29).
2Click [Admin Viewer] or [VB Viewer] according to the
user.
3For [Admin Viewer], enter the user name and
password.
1Launch Admin Tools.
2Click [Admin Viewer].
127
Admin Viewer/VB Viewer
5
Display Screens of Admin Viewer
The following gives an overview of the functions of buttons, boxes and other screen elements displayed in the Admin
Viewer.
The following screen shows the Admin Viewer with all panels opened. In practice, you only open panels that are necessary,
and can put them anywhere desired in the web browser.
(1) Video Display Area
Displays video received from the camera.
(2) Video Size
Set the size and format of video received from the
camera.
(3) Video Display Size
Set the display size of the video shown on the screen.
(4) [Full Screen Mode] button
Live video is shown in full screen mode.
(5) [Reconnect] button
The camera is reconnected.
(6) [Audio Reception] button
Displays the Receive Audio panel.
(7) Slider for tilt
This slider is used to control the tilt (vertical
movement) of the camera.
(8) Slider for pan
This slider is used to control the pan (horizontal
movement) of the camera.
(9) Slider for zoom
This slider is used to control the zoom ratio.
You can zoom in (telephoto) by moving the knob
upwards or zoom out (wide-angle) by moving the
knob downwards.
(10)[BLC] (Back Light Compensation) button
This button turns on/off backlight compensation. This
control is effective when the video is dark due to
backlight.
How to Operate the Viewer
(19) (21)(15)
(32)
(1)
(8)
(16)
(17)
(18)
(12)
(13)
(31)
(33)
(34)
(28)
(9)(3)(2) (7) (4) (6)(5)
(14) (20)
(22)
(18) (19)
(21)
(29)
(23)
(24)
(10)(11)
(25)
(26)
(27)
(30)
128
(11)[Obtain/Release Camera Control] button
This button is used to obtain/release the camera
control privileges.
(12)Information Field
Information messages, warning messages and error
messages are shown to the user.
(13)[Get a Snapshot] button
A still image from the moment of clicking is displayed
in a new window.
(14)Memory Card Mount Status Icon
Displays whether or not the memory card is mounted.
Memory card is mounted.
Memory card is not mounted.
(15)[Start/Stop Memory Card Recording] button
Recording to the memory card starts if you have
camera control privileges. Click again to stop
recording.
(16)[Recorded Video Utility] button
The Recorded Video Utility (p. 116) of the Admin Tools
starts up.
(17)[Switch Area Zoom/Drag to Move] button
Switch between Area Zoom and Drag to Move
functions for dragging in the video display area.
(18)[Event Display] button
The event display panel is displayed.
(19)[Viewer PTZ] button
The viewer PTZ panel is displayed.
(20)[Panorama Display] button
The panorama display panel is displayed.
(21)[Control for Admin] button
Displays the Control for Admin Panel.
(22)[Digital PTZ] button
The Digital PTZ panel is displayed.
(23)Preset selection box
You can control the camera with presets registered in
the camera beforehand.
(24)[Home Position] button
Move the camera angle to the home position.
(25)Event Display Panel
This panel is displayed upon clicking the [Event
Display] button.
The panel shows the input status of external devices
and the status of video and volume detection by
intelligent functions.
(26)Panorama Display Panel
This panel is displayed upon clicking the [Panorama
Display] button.
(27)Panorama Display Area
Displays panorama images registered in the camera.
You can operate the camera by controlling the frame
lines within the panorama display area.
(28)Digital PTZ Panel
This panel is displayed upon clicking the [Digital PTZ]
button.
(29)Digital PTZ Area Designator
Specify the area in the video display area to crop with
Digital PTZ.
(30)[Setting Page]
The screen switches to the Settings Menu page.
(31)[Back to top]
The screen switches to the top page of the camera.
(32)Control for Admin Panel
You can operate the camera with the administrator
authorities. For details, see “Using Control for Admin”
(p. 139).
(33)Viewer PTZ Panel
This panel is displayed upon clicking the [Viewer PTZ]
button.
(34)Viewer PTZ Area Designator
Set the cropped area in the video display area.
VB Viewer
(1) Video Display Area
Displays video received from the camera.
(2) Video Size
Set the size of video received from the camera.
(3) Video Display Size
Set the display size of the video shown on the screen.
(4) [Full Screen Mode] button
Live video is shown in full screen mode.
(2)
(13)
(14)
(1)
(23)
(24)
(10)
(15) (17)
(18)
(16)
(16)
(7)
(12)
(19)
(20)
(21)
(22)
(11)(3) (9) (4)(5)(6) (8)
How to Operate the Viewer
129
5
Admin Viewer/VB Viewer
(5) [Reconnect] button
The camera is reconnected.
(6) [Audio Reception] button
Displays the Receive Audio panel.
(7) Control Privilege Status Indicator
Whether or not the current client has camera control
privileges is shown in this area.
(8) [Obtain/Release Camera Control] button
This button is used to obtain and release the camera
control privileges.
(9) Slider for tilt
This slider is used to control the tilt (vertical
movement) of the camera.
(10)Slider for pan
This slider is used to control the pan (horizontal
movement) of the camera.
(11)Slider for zoom
This slider is used to control the zoom ratio.
You can zoom in (telephoto) by moving the knob
upwards or zoom out (wide-angle) by moving the
knob downwards.
(12)[BLC] (Back Light Compensation) button
This button turns on/off backlight compensation. This
control is effective when the video is dark due to
backlight.
(13)Information Field
Information messages, warning messages and error
messages are shown to the user.
(14)[Get a Snapshot] button
A still image from the moment of clicking is displayed
in a new window.
(15)[Switch Area Zoom/Drag to Move] button
Switch between Area Zoom and Drag to Move
functions for dragging in the video display area.
(16)[Viewer PTZ] button
The Viewer PTZ panel appears.
(17)[Panorama Display] button
The panorama display panel is displayed.
(18)[Digital PTZ] button
The Digital PTZ panel is displayed.
(19)Preset selection box
You can control the camera with presets registered in
the camera beforehand.
(20)[Home Position] button
Move the camera angle to the home position.
(21)Panorama Display Panel
This panel is displayed upon clicking the [Panorama
Display] button.
(22)Panorama Display Area
Displays panorama images registered in the camera.
You can operate the camera by controlling the frame
lines within the panorama display area.
(23)Digital PTZ Panel
This panel is displayed upon clicking the [Digital PTZ]
button.
(24)Digital PTZ Area Designator
Specify the area in the video display area to crop with
Digital PTZ.
Obtaining Camera Control Privileges
The camera cannot be controlled by multiple users
simultaneously. Only the user with the control privileges
can control the camera. To perform backlight
compensation camera control, you must obtain control
privileges first.
How to Operate
Click the [Obtain/Release Camera Control] button to
obtain the control privileges.
Camera Control Privilege Status Indicator
Display of the camera control buttons and camera control
status indicator changes according to the status of control
privileges shown as follows.
[Obtain/Release Camera Control]
button
This button is used to obtain/release the
camera control privileges.
Camera Control
Privilege Display
Displays camera
control privilege
status.
Admin Viewer VB Viewer
Control privileges not assigned
With the VB Viewer, the control privilege status
indicator appears in gray and an animated
[Obtain/Release Camera Control] button is
displayed.
The Admin Viewer does not display a control
privilege status indicator. The [Obtain/Release
Camera Control] button is grayed out.
When waiting for control privileges in the VB
Viewer, the remaining standby time is shown
on the control privilege status indicator.
Waiting for control privileges
130
Controlling the Camera
Obtain camera control privileges before carrying out the
following operations. These operations can be carried out
in both the Admin Viewer and the VB Viewer.
Note
• Operations carried out by clicking or dragging will not be
precise.
• Users operating the camera in the Admin Viewer with the
administrator authorities can control the camera outside the
view restrictions.
Users operating the camera in the Admin Viewer with the
authorized user authorities can control the camera only within
the view restrictions.
• Users operating the camera in the VB Viewer can control the
camera within the view restrictions.
Changing the Camera Angle
You can change the angle by doing one of the following:
Use the pan and tilt sliders
The camera angle will change according to the knob
position on the sliders. The knob can also be moved by
clicking on an empty part of the slider.
Click on the video
When you click on the video display area, the camera
angle changes so that the clicked position becomes the
center of the video. If the desired position is not displayed
in the center with one click, align the mouse pointer and
click again until the desired position is displayed in the
center.
Note
• While using the Viewer PTZ, clicking on the video display area
does not work.
• In the Admin Viewer, you can also control the pan and tilt with
the camera control button (p. 139).
Change the Camera Angle in the Panorama
Display Area
Move by clicking
Clicking a point in the panorama window moves the pan
and tilt to center on that point.
Move by dragging
Dragging the yellow frame lines in the panorama window
moves the pan and tilt to capture that area.
Note
Clicking outside the yellow frame lines and dragging will create
blue frame lines. When you release the mouse button, the blue
lines will turn yellow and the camera will change the pan, tilt and
zoom in order to capture that area.
Important
The estimated pan and tilt operational durability is 50,000 full
cycle operations. For example, 25 full cycles made per day
would result in 6 years of operation.
The focus and zoom may also operate abnormally if the pan
and tilt operational durability estimates are exceeded.
After gaining control privileges with VB
Viewer, the duration for which control
privileges can be held exclusively over other
guest users counts down.
Control privileges assigned
(restricted time counting down)
The control privilege status indicator is shown
in blue.
The [Obtain/Release Camera Control] button
in the VB Viewer is blue in the center.
The [Obtain/Release Camera Control] button
in the Admin Viewer is yellow green in the
center.
Control privileges assigned
1Click the [Panorama Display] button.
2Change the camera angle in the panorama display
area.
Video Display Area
This slider is used to control
the pan (horizontal
movement) of the camera.
This slider is used to control
the tilt (vertical movement)
of the camera.
The frame lines within the display area show the
image currently being captured by the camera.
Blue frame lines mean that you do not have camera
control privileges.
Yellow frame lines mean that you have camera
control privileges.
How to Operate the Viewer
131
5
Admin Viewer/VB Viewer
Use Area Zoom/Drag to Move
You can drag on the video display area to zoom in and
out, and change the camera angle.
Note
You cannot not use Area Zoom or Drag to Move when using
Viewer PTZ.
Use Area Zoom to Zoom In and Out
Drag left-to-right to define an area to zoom in on.
Drag right-to-left to draw out a rectangle in which will
appear a preview of the video display area size in
relation to the final image when zoomed out, as well as
defining the center of the video display.
When operating in Area Zoom mode, an icon (zoom
in: ; zoom out: ) appears in the rectangle.
To stop Area Zoom, right-click while holding the left
button and while the rectangle is displayed.
When dragged left-to-right, the camera will zoom in
until the area in the rectangle fills the video display
area.
When dragged right-to-left, the camera will zoom out,
centered around the area in the rectangle.
Use Drag to Move to Change the Camera Angle
The camera angle will move in the direction of the
arrow.
The maximum length of the arrow is half the width and
height of the video display area, and movement
speed increases in accordance with the length of the
arrow.
Note
When using Drag to Move, the sliders will not move while the
camera moves.
The camera will stop.
Changing the Camera Zoom Ratio
Move the knob on the slider up or down to zoom in or out
The camera zoom ratio will change according to the knob
position on the slider. The knob can also be moved by
clicking on an empty part of the slider.
1Click the [Switch Area Zoom/Drag to Move] button to
enter mode.
2Drag out a rectangle in the video display area.
3Release the mouse button.
1Click the [Switch Area Zoom/Drag to Move] button to
enter mode.
2In the video display area, drag in the direction you
would like to change the camera angle. An arrow will
appear.
3Release the mouse button.
132
Note
• In the Admin Viewer, you can also control the zoom with the
Camera Control button (p. 139).
• If [Digital Zoom] is set to [Enable] in [Camera] on the Setting
page, the icon for the digital zoom telephoto end is displayed.
(p. 46).
• Zoom refers to digital zoom only.
Change the Zoom Ratio in the Panorama
Display Area
You can change the zoom ratio by dragging the yellow
frame lines in the panorama window and changing the
size of the frame. The zoom ratio will adjust to capture
the area in the changed frame.
Note
Zoom refers to digital zoom only.
Using the Preset/Home Position
You can control the camera using presets and home
position registered in the camera beforehand (p. 94).
Click the preset selection box and select a preset from the
displayed list to go to the selected preset camera angle.
Click the [Home Position] button to move the camera
angle to the home position.
Note
Register presets and home position beforehand using the Preset
Setting Tool (p. 96). Registered presets will appear in the preset
selection box.
Compensating Backlight
This control is effective when the video is dark due to
backlight.
Clicking [BLC] brightens video that is dark due to
backlight.
Clicking the button again cancels backlight
compensation.
Magnifying Part of the Video (Viewer PTZ)
You can use the Viewer PTZ panel to magnify part of the
camera’s video in the video display area.
1Click the [Panorama Display] button.
2Change the zoom ratio in the panorama display area
displayed.
Maximum telephoto
digital zoom
(only when digital zoom is
on)
Maximum telephoto
Slider for zoom
Move the knob upwards to
zoom in (telephoto)
Move the knob downwards
to zoom out (wide-angle)
Maximum Wide Angle
Important
• The [BLC] button is not available if [Smart Shade Control] is
set to [Auto].
• The [BLC] button is not available if [Exposure] is set to
[Manual].
[Home Position] button
Preset selection box
How to Operate the Viewer
133
5
Admin Viewer/VB Viewer
Viewer PTZ
Viewer PTZ uses the digital zoom function to enlarge part
of a video without using the camera pan, tilt or zoom
functions.
This function allows you to enlarge part of a video when
using the camera in a locked position, for example, during
use of an intelligent function.
Note
• Video cropped with Viewer PTZ will not be videos recorded
manually, or by event or timer.
• The cropped position in the video display area will be reflected
in full screen mode as well.
Opening the Viewer PTZ Panel
Click the [Viewer PTZ] button to display the viewer PTZ
panel.
The [Viewer PTZ] button appearance will change as
follows depending on the status of the Viewer PTZ
function.
The initial status of the Viewer PTZ panel shows the
preview frame (yellow) occupying the entire video.
Adjusting the Preview Frame Size
Drag the preview frame line to make the frame smaller,
and a magnified view of the video in the frame will be
shown in the video display area.
The preview frame turns blue when you drag it.
You can also click and drag outside the preview frame to
draw a new preview frame.
Note
The Viewer PTZ uses digital zoom, so the higher the digital zoom
ratio, the lower the quality of the video becomes.
Moving the Preview Frame
You can move the preview frame to the desired position.
Move by dragging
Click within the preview frame and drag it over the subject
that you want to see magnified.
The preview frame turns blue when you drag it.
Move by clicking
Click a position outside of the preview frame and the
preview frame will move to that position. Click the subject
that you want to see magnified.
Move using sliders
You can pan, tilt and zoom the displayed video using
sliders.
Note
After changing the preview frame, the video display area will
continue to display the cropped video corresponding to the
preview frame even after the Viewer PTZ panel is closed.
However, when you reconnect to Viewer, the initial status will be
restored.
Important
When the Viewer PTZ function is used, you cannot operate the
camera by clicking/dragging the video display area.
Viewer PTZ disabled (video being received by
the camera appears in the video display area)
Viewer PTZ enabled (magnified video appears in
the video display area)
Preview Frame
(Magnified display area)
Center of preview
frame
134
Exiting Viewer PTZ
Click the [Viewer PTZ] button again. The Viewer PTZ
panel closes and Viewer PTZ is exited.
Cropping and Displaying Part of Video
(Digital PTZ)
You can use the Digital PTZ panel to crop and display
part of a camera video in the video display area. It is also
possible to use a preset or home position registered to the
camera.
Digital PTZ
Digital PTZ is a function that facilitates simple panning,
tilting, and zooming without changing the camera lens
position that was adjusted at the time of installation by
transmitting just part of the camera effective pixel area
from the camera to the viewer.
Note
If digital PTZ is enabled while receiving H.264 video, the received
video changes to JPEG format.
Differences Between Viewer PTZ and Digital
PTZ
Viewer PTZ and Digital PTZ are both simple pan, tilt, and
zoom functions that use the digital zoom function, but they
have the following differences because they employ
different operating principles.
Opening the Digital PTZ Panel
Click the [Digital PTZ] button to display the Digital PTZ
panel.
The appearance of the [Digital PTZ] button differs as
follows depending on the state of the Digital PTZ function.
Specifying a Cropping Range
Change the position and size of the preview frame on the
Digital PTZ panel to specify the range to display in the
video display area.
You can also click and drag outside the preview frame to
draw a new preview frame.
The preview frame is blue when you have not obtained
camera control privileges. When you obtain camera
control privileges, the preview frame turns yellow and you
can use the following procedures to resize and move it.
Changing the Size
You can resize the preview frame by dragging it. The
preview frame turns blue during dragging. The video
inside the frame is displayed in the video display area in
accordance with the size of the frame.
Viewer PTZ Digital PTZ
Enlarges the specified part of
the video transmitted from the
camera and then displays it in
the viewer.
Transmits only the trimmed
part of the entire area that can
be captured by the camera.
The size of the received data
is large.
The size of the received data
is small.
PTZ operation can be
performed independently for
each viewer.
Independent operation cannot
be performed for each viewer
(if multiple viewers are
connected, the same display
is applied in the other
viewers).
Digital PTZ is disabled (displays the scene as seen by
the camera).
Digital PTZ is enabled (displays trimmed video).
How to Operate the Viewer
135
5
Admin Viewer/VB Viewer
The preview frame size can be set to any of five sizes (the
changed size is displayed under [Video Size] on the
digital PTZ panel).
The sizes that can be selected depend on the [Video Size
Set] setting under [Video] > [All Videos] on the Setting
page (p. 48).
If the aspect ratio of the set [Video Size Set] is 16:9, the
five sizes are 640 x 360, 512 x 288, 384 x 216, 256 x 144,
and 128 x 72. If the aspect ratio is 4:3, the five sizes are
640 x 480, 512 x 384, 384 x 288, 256 x 192, and 128 x 96.
Changing the Position
You can move the preview frame by dragging the inside
of the frame.
If you click any position in the Digital PTZ display area, the
preview frame moves to the clicked position.
Note
The preview frame moves in stages. You cannot finely adjust the
position.
Specifying a Range with the Sliders
You can use the pan, tilt, and zoom sliders for the video
display area to specify the cropping range in the video
display area. The preview frame on the Digital PTZ panel
also moves in accordance with the operation of the pan,
tilt, and zoom sliders.
Using a Preset or the Home Position
You can use a registered preset or home position to
specify the range for Digital PTZ.
Click the preset selection box and select a preset from the
displayed list to move the preview frame on the Digital
PTZ panel to the preset position and display the video
inside the frame in the video display area.
Click the [Home Position] button to move the preview
frame on the Digital PTZ panel to the home position and
display the video inside the frame in the video display
area.
Note
Register the preset or home position beforehand using the Preset
Setting Tool (p. 96). Registered presets will appear in the preset
selection box.
Exiting Digital PTZ
Click the [Digital PTZ] button again. The Digital PTZ panel
closes and Digital PTZ ends.
Although clicking the close button of the Digital PTZ panel
closes the Digital PTZ panel, Digital PTZ will stay on.
However, when you reconnect to Viewer, the initial status
will be restored.
Setting Video and Audio
Changing the Video Size
You can set a desired video size for video received from
the camera.
The sizes that can be selected depend on the [Video Size
Set] setting under [Video] > [All Videos] on the Setting
page (p. 48).
[Video Size Set] setting
Selectable video size
JPEG H.264*1
1920 x 1080 / 960 x 540 /
480 x 270*4
480 x 270
960 x 540
1920 x 1080
*2
*3
1280 x 720 / 640 x 360 /
320 x 180
320 x 180
640 x 360
1280 x 720
*2
*3
1280 x 960 / 640 x 480 /
320 x 240
320 x 240
640 x 480
1280 x 960
*2
*3
136
*1 When the [Enable H.264 reception] checkbox is checked in
Admin Viewer > Control for Admin > [Video Reception]
(p. 144), H.264 video sizes will be added to the menu display.
*2 The H.264 video sizes set in [Video Size] under [Video] >
[H.264(1)] and [H.264(2)] (p. 48) on the Setting page are
added to the menu.
*3 If [H.264(2)] is set to [Enable] under [Video] > [H.264(2)]
(p. 49) on the Setting page, the video sizes for both [H.264(1)]
and [H.264(2)] are added to the menu.
*4 [Video Size Set] cannot be set to [1920 x 1080 / 960 x 540 /
480 x 270] for the VB-S805D and VB-S905F (p. 48).
Changing the Display Screen Size
You can change the display screen size.
The display screen sizes that can be selected depend on
the [Video Size Set] setting under [Video] > [All Videos] on
the Setting page (p. 48).
* [Video Size Set] cannot be set to [1920 x 1080 / 960 x 540 /
480 x 270] for the VB-S805D and VB-S905F (p. 48).
[Actual Pixels] displays the video at the size at which it is
being captured.
[Fit to Window] displays the video at the maximum size
possible in the web browser window.
Displaying in Full Screen Mode
You can show video over the entire display. Clicking this
button will switch the viewer to full screen mode.
To close the full screen window, either click that
appears in the lower right of the full screen window or
select [Exit Full Screen Mode] in the following menu.
You can display the necessary panels for controlling the
camera in the full screen mode. Right-click on the screen
and select the necessary panel from the menu that
appears.
[Start/Stop Control] Obtain and release the camera
control privileges.
[Preset] Select a preset.
[Home Position] Move the camera angle to the
home position.
[Panorama]
Displays the panorama display
panel.
[Start/Exit Viewer PTZ]
The viewer PTZ panel is
displayed.
[Start/Exit Digital PTZ]
The Digital PTZ panel is
displayed.
[Control] Displays the camera control
panel.
[Pan/Tilt Slider] Displays the pan/tilt slider.
[Control for Admin] Displays the Control for Admin
Panel (Admin Viewer only).
[Drag to Move Mode/Area Zoom Mode]
Switch between Area Zoom and
Drag to Move functions for
dragging in the video display
area.
[Video Capture Size] Switch video capture size.
[Snapshot] Get a snapshot.
[Audio Reception] Displays the Receive Audio
panel.
[Event Display] Displays the event display panel
(Admin Viewer only).
[Start/Stop Memory Card Recording]
Start and stop video recording to
a memory card (Admin Viewer
only).
[Exit Full Screen Mode] Exit full screen mode.
Important
H.264 video cannot be displayed using VB Viewer.
[Video Size Set] setting Selectable display
size
1920 x 1080 / 960 x 540 /
480 x 270*
Actual Pixels
480 x 270
960 x 540
1920 x 1080
Fit to Window
1280 x 720 / 640 x 360 /
320 x 180
Actual Pixels
480 x 270
640 x 360
1280 x 720
Fit to Window
1280 x 960 / 640 x 480 /
320 x 240
Actual Pixels
480 x 360
640 x 480
1280 x 960
Fit to Window
Admin Viewer VB Viewer
How to Operate the Viewer
137
5
Admin Viewer/VB Viewer
You can move any panel by clicking the title bar and
dragging it to the desired position.
Getting a Snapshot
Captures a still image from live video and displays it in a
new window.
You can also save still images.
Click [Get a Snapshot] button at the moment you want to
capture a still image.
A snapshot panel will open showing a still image from the
moment you clicked it. When the snapshot panel is open,
click the [Get a Snapshot] button to update the image
displayed in the snapshot panel.
To save a still image, right-click on it and select the save
option from the menu that appears.
Enter the file name desired and save the image.
Note
• The snapshot is saved as a JPEG file.
• The saved snapshots are the same size as the video capture
size.
Reconnect
To reconnect the camera, click this button.
Note
If you reconnect, audio reception will stop and camera control
privileges will be lost.
Receiving Audio
You can receive audio through the microphone attached
to the camera.
Click this button to receive audio.
Select the [Receive audio] checkbox in the Receive Audio
panel that appears and use the slider to set an
appropriate volume.
Note
• To receive audio, set [Server] > [Audio Server] > [Audio
Transmission from the Camera] to [Enable] in the setting pages
beforehand (p. 56).
• The first time the Receive Audio panel is launched from the VB
Viewer, a message to install the “Canon Network Camera Audio
Receiver” add-on will be displayed in the information bar of the web
browser. Install the add-on.
• Regardless whether or not the Receive Audio panel is open, audio
will always be received if the [Receive audio] checkbox is selected
in the Receive Audio panel.
• To use the audio function in environments that use a proxy server,
the camera IP address must be specified in [Internet options] >
[Connections] > [LAN settings] > [Proxy server] > [Advanced] >
[Exceptions] of Internet Explorer.
Icon Meaning
Receiving audio
Not receiving audio
138
Checking Information
The following icons will appear depending on the content
of the information displayed.
Note
For details on the messages, see “List of Viewer Messages”
(p. 163).
Icon (color) Meaning Description
(Blue) Information
Appears when a camera
operation has been successful.
The following information
appears.
• Help messages, such for each
button and pull down menu
• Frame rate information
• Pan, tilt, zoom
camera information
• Pan, tilt, and
zoom information for Digital
PTZ
(Yellow) Warning
A message will appear notifying
the user when camera control
privileges cannot be obtained,
audio reception stops, etc.
(Orange) Error Appears when a system error
occurs.
139
Admin Viewer/VB Viewer
5
The operations and settings that can be performed only in the Admin Viewer are explained.
Using Control for Admin
When you have obtained control privileges, click the
[Control for Admin] button to display the Control for Admin
Panel and perform camera operation and video settings.
Opening/Closing and Moving Control Items
Clicking the title of a control item will open or close it.
You can open the various control items even without
obtaining the camera control privileges, but all items other
than [Video Reception] are not available.
You can also reorder control items using the up/down
buttons.
Performing Operations and Settings
Click the camera control buttons to set the pan, tilt and
zoom operations as well as the speed.
(1) [Pan/Tilt] button
Move pan and tilt in the direction of the arrows.
Operation will continue as long as you are holding
down the button and will stop when you release it.
Click the center button to center the camera at 0° pan,
45° tilt (When upright. -45° when ceiling mounted).
(2) [Pan/Tilt Speed] button
Select a pan/tilt speed from [Fast], [Normal] and
[Slow].
(3) [Control speed by zoom position] checkbox
Check the box to adjust the pan/tilt speed in response
to the visible range. Pan/tilt speed is slowest at
maximum telephoto, and fastest at maximum wide
angle. Uncheck the box to pan/tilt at a set speed.
The checkbox is always checked if [Control by zoom
position] is selected in [Camera] > [Camera Control]
> [Pan/Tilt Speed Control] on the setting page (p. 47).
The pan/tilt speed control can be enabled/disabled
using this checkbox when [Control at set speed] is
selected in [Camera] > [Camera Control] > [Pan/Tilt
Speed Control].
(4) [Zoom] button
Zooms in or out. Operation will continue as long as
you are holding down the button and will stop when
you release it.
(5) [Zoom Speed] button
Set the zoom speed to [Fast] or [Slow].
Note
Changing the [Pan/Tilt Speed] or [Zoom Speed] will not change
the speed of the slider, or of the pan, tilt or zoom in panorama.
Performing Operations and Settings in the Admin Viewer
⇔
⇔
(1)
(4)
(2)
(5)
(3)
140
Setting the Smart Shade Control
The smart shade control function differs from backlight
compensation in that only dark areas are brightened while
bright areas are kept intact.
(1) [Smart Shade Control]
Select [Auto], [Manual], or [Disable].
(2) Adjusting the Smart Shade Control
When smart shade control is [Manual], set one of the 7
levels from [1] (Mild) to [7] (Strong).
Example: If the background is bright and the subject
is hard to see, this function brightens dark areas to
make the subject clearer.
In comparison to backlight compensation, smart
shade control can reduce overexposure of bright
areas.
Note
• When [Auto] or [Manual] is selected for smart shade control,
the video data size increases.
• When [Manual] is selected for smart shade control, setting a
high compensation strength may increase screen noise. If
noise is noticeable, lower the control level.
Setting the Haze Compensation
If the subject is obscured by haze, this adjusts contrast in
the video to improve subject visibility.
(1) [Haze Compensation]
[Auto]
Automatically uses Compensation Removal.
[Manual]
Use buttons in (2) to manually set the compensation
strength.
[Disable]
Disables Haze Compensation.
(2) Haze Compensation Strength
When Haze Compensation is [Manual], set one of the
7 levels from [1] (Mild) to [7] (Strong).
Note
• When [Auto] or [Manual] is selected for [Haze Compensation],
the video data size increases.
• When using [Haze Compensation], contrast may be strong if
the subject is not obscured by haze. If this happens, set [Haze
Compensation] to [Manual] and set a lower Haze
Compensation strength.
Setting the Focus
[Auto] : Automatically focuses on the
subject.
[Manual] : You can adjust the focus manually
by pushing the (far) and
(near) buttons.
Clicking [One-shot AF] will use
autofocus to focus on a subject and
then stop in manual focus.
[Fixed at Infinity] : You can set the focus so that it is
fixed near infinity.
Important
• [Auto] cannot be selected for [Smart Shade Control] if
[Exposure] is set to [Manual].
• If you set [Haze Compensation] to [Auto] or [Manual], [Smart
Shade Control] is set to [Disable].
(1)
(2)
OFF Smart Shade
Control
BLC (Back Light
Compensation)
Important
If you set [Smart Shade Control] to [Auto] or [Manual], [Haze
Compensation] is set to [Disable].
(1)
(2)
Performing Operations and Settings in the Admin Viewer
141
5
Admin Viewer/VB Viewer
Setting the Exposure
(1) Exposure Mode
Select from [Auto], [Manual], [Auto (Flickerless)],
[Auto (Flickerless 2)] or [Auto (Shutter-priority AE)].
If [Auto] is selected for [Day/Night] under [Camera] in
the Setting page (p. 46), select [Auto], [Auto
(Flickerless)], [Auto (Flickerless 2)] or [Auto (Shutter-
priority AE)].
[Auto]
The exposure is controlled automatically.
[Manual]
The exposure is set by adjusting the shutter speed
and gain values manually.
[Auto (Flickerless)]
In this mode, video flickering caused by fluorescent
lights, etc., can be reduced. The shutter speed is
automatically adjusted according to the brightness
of the environment in which the camera is used.
[Auto (Flickerless 2)]
Use this mode if flickering is not reduced when
[Auto (Flickerless)] is selected. However, the
automatic adjustment range for the shutter speed is
suppressed so as not to exceed 1/100 sec. in this
mode, resulting in improper exposure
(i.e., excessive brightness) in some cases.
[Auto (Shutter-priority AE)]
In this mode, the desired shutter speed can be
specified.
(2) [Exposure Compensation]
When [Auto], [Auto (Flickerless)], [Auto (Flickerless 2)]
or [Auto (Shutter-priority AE)] is selected for
[Exposure], the exposure compensation value desired
can be selected from nine levels (-4 to +4) using the
slider.
To darken the video, select a negative value. To
brighten the video, select a positive value.
(3) [Metering Mode]
When [Auto], [Auto (Flickerless)], [Auto (Flickerless 2)]
or [Auto (Shutter-priority AE)] is selected for
[Exposure], the metering mode can be selected from
[Center-Weighted], [Average] or [Spot].
For an explanation on each item set in [Metering
Mode], see [Metering Mode] in the Setting page
(p. 44).
(4) [Shutter Speed]
When [Manual] or [Auto (Shutter-priority AE)] is
selected for [Exposure], select the shutter speed
desired. If [Manual] is selected, set the shutter speed
in the range of [1/1 sec] to [1/16000 sec] from a pull-
down menu. If [Auto (Shutter-priority AE)] is selected,
set the shutter speed in the range of [1/2 sec] to [1/
16000 sec] from a pull-down menu.
When capturing a moving subject, selecting a higher
shutter speed can reduce blurry video capture.
(5) [Slow Shutter]
You can set slow shutter if [Exposure] is set to [Auto],
[Auto (Flickerless)] or [Auto (Flickerless 2)]. Select a
value in the range of [1/2 sec] to [1/30 sec] from the
pull-down menu.
As slower shutter speeds generate afterimages when
capturing a moving subject, select an appropriate
time according to the capture conditions.
(6) [Gain]
If [Manual] is selected for [Exposure], set a desired
gain value.
Moving the slider to the left decreases the gain
(sensitivity to brightness) and darkens the video.
Moving the slider to the right increases the gain and
brightens the video.
Important
• If it is set in the Admin Viewer, the same focus mode will
occur in the viewers of other users also.
• Setting the shutter speed at [1/1 sec] in manual exposure
(p. 141) will disable the [Auto] and [One-shot AF] focus
modes in Control for Admin. Switch the focus to [Manual] and
adjust it to your subject.
• Please refer to the notes on p. 46 for subjects that are difficult
to focus on, focus ranges and other information.
• Changes to focus mode in the Admin Viewer will not be
reflected in the settings on the setting page.
• Note that if you set the focus manually it will remain fixed.
(1)
(2)
(3)
(4)
(5)
(6)
Important
• If the subject is a traffic signal or electronic scoreboard, etc.,
the captured video may flicker.
In this case, try changing [Exposure] to [Auto (Shutter-priority
AE)] and then select a shutter speed lower than 1/100, to see
if the situation improves.
142
Setting White Balance
(1) [Auto]
The white balance is adjusted automatically.
(2) [Light Source]
Select the light source from the pull-down menu below
according to the condition in which the camera is
used.
For an explanation on each item set in [Light Source],
see [White Balance] in the Setting page (p. 45).
(3) [Manual]
The white balance is adjusted manually.
[One-shot WB]
This is used for forcibly locking the white balance to
match the light source.
Example of setting method:
Illuminate a white subject (white paper, etc.) using
the light source, making sure the subject fills the
entire screen, and then execute [One-shot WB].
[R Gain], [B Gain]
When setting the white balance manually, set the
values of red and blue gain in the range 0 to 1023 to
match the light source.
Setting the Day/Night Mode
(1) [Auto]
The camera automatically switches to day mode or
night mode depending on ambient brightness.
(2) [Day Mode]
Color video can be viewed in the normal mode.
(3) [Night Mode]
Video is shown in black and white.
Note
Though the camera has an infrared filter, there is no effect on
lighting due to infrared light as the camera does not have an
insertion/removal mechanism for the filter.
• [Exposure Compensation] and [Manual] for [Exposure]
cannot be selected if [Smart Shade Control] is set to [Auto].
• Even if [Exposure] is set to [Auto (Flickerless)] or [Auto
(Flickerless 2)], some screen flicker may still occur under
unstable light source conditions.
• When [Camera] > [Camera Control] > [AGC Limit] is set to
[OFF] in the setting page and [Exposure] is set to [Auto
(Shutter-priority AE)], exposure compensation and backlight
compensation will not be performed.
(1)
(2)
(3)
Important
• Since the light source selection options are based on
representative characteristics, proper colors may not be
achieved depending on the applicable light source. In this
case, use the [One-shot WB] function.
• If the subject looks greenish under mercury lamps in the
[Auto] mode, select the [Mercury Lamp] mode under light
source. If the video is still not shown in appropriate colors
under mercury lamps when the [Mercury Lamp] mode is
selected under light source, use [One-shot WB].
• When the subject has only one color, illumination is low, or
when sodium lamps, mercury lamps and certain other
fluorescent lighting are used, colors may not be adjusted
appropriately.
• When [Day/Night] is set to [Night Mode] (including when it is
set to [Auto] and night mode is judged to be applicable), the
white balance function cannot be used.
• Notes on capturing video continuously day and night
If a subject that seldom changes is captured in a location
where the light source changes gradually, such as when
capturing a subject continuously day and night, appropriate
colors may not be achieved.
In the above case, applying changes to the video to capture
will achieve the appropriate colors.
Important
If the viewer is exited in [Day Mode] or [Night Mode], auto day/
night stays disabled even if [Auto] is set in the setting page. To
set auto day/night to enable, be sure to exit the viewer after
setting [Auto].
(2)
(3)
(1)
Performing Operations and Settings in the Admin Viewer
143
5
Admin Viewer/VB Viewer
Selecting the External Device Output
You can control external device output and display the
current output status using an icon. Output can be
activated and deactivated by clicking this icon.
Registering Custom Settings
By registering settings for camera position, exposure,
white balance, etc. beforehand, you can load settings
using manual or automatic control.
In custom settings, the setting values for the following
items in the Control for Admin menu can be saved.
[Smart Shade Control], [Haze Compensation],
[Exposure], [White Balance], [Image Quality Adjustment],
[Day/Night]
[Pan/Tilt/Zoom]
[Focus]
Click [Register] after completing the above settings to
register the custom settings.
(1) Custom setting button
Select the numbered button with the registered
custom settings to load the settings.
(2) [Register Custom Settings]
The [Register Custom Settings] panel is displayed.
(3) [Register to]
Select the number for the custom setting you want to
register from the selection box.
(4) [Include Current PTZ Position] checkbox
Select the checkbox to register the current pan, tilt,
and zoom settings.
(5) [Register]
Register the current camera settings in the custom
setting number selected in [Register to].
(6) [Auto Control Settings]
Displays the [Auto Control Settings] panel.
(7) [Verify registered contents of custom settings]
Displays the settings registered for the custom setting
number selected in [Register to].
Setting automatic control
Click the [Auto Control Settings] button to display the
[Auto Control Settings] panel, and set the [Day/Night
Mode Switching] and [Timer].
(1) [Auto Control]
Select [Not used], [Day/Night Mode Switching], or
[Timer] for the auto control setting.
(2) [In Day Mode], [In Night Mode]
When [Day/Night Mode Switching] is selected in [Auto
Control], select the custom setting number used when
switching day mode and night mode or select [None]
for each item.
(3) [Timer 1] to [Timer 4]
When [Timer] is selected in [Auto Control], set the
time for switching the custom setting in [Time] in 24-
hour format and select the custom setting number in
[Custom Setting], or select [None].
Icon Meaning
Output inactive state
Output active state
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(3)
(1)
(4)
(2)
144
(4) [Register]
Register the auto control settings.
Adjusting Image Quality
(1) [Noise Reduction]
Select [Mild], [Standard], or [Strong] for the noise
reduction setting.
Principally, this setting is more effective in low-light
conditions. When set to [Strong], the noise reduction
effect is increased, but the afterimage of moving
subjects becomes easier to see. When set to [Mild],
the noise reduction effect is decreased and resolution
is increased, but the video file size becomes larger.
(2) [Sharpness]
Select a level from [1] (Mild) to [7] (Strong) for the
sharpness setting.
When set to [Strong] the video becomes sharper, and
when set to [Mild] the video becomes softer. Also,
when set to [Strong] the video file size becomes
larger.
(3) [Color Saturation]
Select a level from [1] (Light) to [7] (Dark) for the color
saturation setting.
Enabling Video Reception
(1) [Max. Frame Rate (JPEG)]
You can select the maximum frame rate for JPEG
displayed video from one of twelve levels between [30
fps] to [0.2 fps]. The setting is not available when
displaying H.264 video in the video display area.
(2) [Enable H.264 reception] checkbox
Select to receive H.264 video. The Software Product
License Agreement dialog box appears. Click [Yes] to
accept the terms of the license agreement. The
decoder is downloaded from the camera, enabling
H.264 video reception.
Displaying Event Status
Clicking the [Event Display] button will show the event
display panel, which shows the input status of external
devices, as well as the status of video and volume
detection by the intelligent function.
(1) [External Device Input]
When a contact input signal is received from an
external device, input will be activated and an icon will
be displayed.
(2) [Intelligent Function (Image Detection)]
The status of intelligent function (image detection) will
be displayed. When the detection settings
configured in intelligent functions (Moving Object
Detection, Abandoned Object Detection, Removed
Object Detection, Camera Tampering Detection or
Passing Detection) enter Detected mode, the
corresponding icon will turn green (p. 107).
If names are entered in [Detection Setting Name] in
Intelligent Function Setting Tools (p. 107), [Setting 1]
to [Setting 15] will be displayed with the
corresponding name.
Important
If the same time is specified multiple times for [Timer 1] to
[Timer 4], [Register] will be disabled and the settings will not be
possible.
(1)
(2)
(3)
(1)
(2)
Icon Meaning
Input inactive state
Input active state
(1)
(2)
(3)
Performing Operations and Settings in the Admin Viewer
145
5
Admin Viewer/VB Viewer
Example:
Setting 1: Image Detection status ON
Other settings: Image Detection status OFF
Note
The icon signifying Detection mode will be displayed for a
maximum of five minutes (except for Moving Object Detection).
(3) [Intelligent Function (Volume detection)]
The volume detection status is displayed. When
sound that meets the criteria selected under [Event] >
[Volume Detection] in the Setting Page is detected,
the icon turns green (p. 58).
Example:
Volume Detection status ON
Recording to a Memory Card Manually
Video displayed in the Admin Viewer can be manually
recorded to a memory card.
Note
• To record on a memory card, a memory card must be inserted
in the camera (p. 128) and [Save Logs and Videos] must be
selected in the setting page > [Memory Card] > [Operation
Settings].
• The format and size of the video recorded on a memory card
depends on the settings made on the Setting page.
Video format: [Memory Card] > [Video Format]
Video size: JPEG [Video] > [JPEG] > [Video Size: Upload /
Memory card]
H.264 [Video] > [H.264(1)] > [Video Size]
Recording Videos Manually
The [Start/Stop Memory Card Recording] button
appearance changes as shown below depending on
recording status.
Confirming Manually Recorded Video
Use the Recorded Video Utility (p. 116) to confirm video
manually recorded to a memory card.
Click the [Recorded Video Utility] button to start the
Recorded Video Utility from the Admin Viewer.
1If you have not yet obtained the camera control
privileges, click the [Obtain/Release Camera Control]
button and obtain the control privileges.
2Click the [Start/Stop Memory Card Recording] button.
Not recording
Recording
3To stop video recording, click the [Start/Stop Memory
Card Recording] button again.
Important
• Recording to the memory card will be terminated when the
length of manually recorded videos exceeds 300 seconds
from the time recording started.
• When recording manually, do not change the settings in the
[Setting Page]. Doing so may result in the termination of the
manual recording.
146
Chapter 6
Appendix
❏Memory Card Access
❏Modifiers
❏Troubleshooting
❏List of Log Messages
❏List of Viewer Messages
❏Restore Default Settings
❏List of Factory Default Settings
❏Specifications
❏Index
148
You can set the camera so that the following data is saved automatically to the camera’s memory card. (“Chapter 3 Setting
Page”, “[Memory Card] Memory Card Operations and Settings” (p. 71)).
When either the storage capacity of the memory card or the number of files that can be saved is reached, you cannot save
further video to the memory card. If this happens, delete any unneeded video files with the Recorded Video Utility.
• Video files when recording-mode stream transmission failed to be sent due to network errors (JPEG only)
• Video files when HTTP or FTP upload failed (JPEG/H.264(1))
• Video files manually recorded by the user from the Admin Viewer (JPEG/H.264(1))
• Video files recorded by [External Device Input], [Volume Detection], and the intelligent functions when an event occurs
(JPEG/H.264(1))
• Video files recorded using a timer (JPEG/H.264(1))
•Log
Access to the Memory Card
Use the Recorded Video Utility (p. 116) of the Admin Tools or FTP software (not included) to access the camera using the
camera’s IP address.
When using FTP software, set [Setting Page] > [Server] > [Use FTP Server] to [Enable].
FTP Software Settings
Address: Camera IP address (factory default setting: 192.168.100.1)
User ID: root
Password: Administrator password
Directory Structure for Data Downloaded with Recorded Video Utility
When video on a memory card is downloaded to a computer with the Recorded Video Utility, folders are created
automatically in accordance with conditions such as the camera and the date and time.
The following shows the folder structure.
Example: H.264 video, manually recorded using a camera with an IP address of 192.168.100.1, on Sept. 10, 2015, from
16:00:00 to 16:59:59 (Camera Time Zone: GMT+09:00).
(1) Folder specified with [Download to]
(2) IP address of the camera
(3) Video recording date
(4) Recording start and end times (UTC)
(5) Time difference from UTC
(6) Recording type
E: Event
M: Manual recording
R: Recording-mode stream
T: Timer
U: Upload
(7) Video format (JPEG or H.264)
Memory Card Access
Important
• When deleting a video using a method other than the Recorded Video Utility, you must perform [Recreate Video Management
Information] under [Memory Card] in the setting page (p. 72).
• Canon will assume no liability for any accident or damage resulting from use of FTP software.
D:\work \ 192.168.100.1 \ 20150910 \ 070000_075959 _ +9 _ M _ H264
(1) (2) (3) (4) (5) (6) (7)
Memory Card Access
149
Appendix
6
Note
• A folder is created once per hour.
• If the time difference is added to the starting and ending times, it will equal the local time.
File Name Format for Data Downloaded with Recorded Video Utility
Example: Video, manually recorded on Sept. 10, 2015, starting from 16:06:19 (Camera Time Zone: GMT+09:00).
(1) Video recording date
(2) File creation time (UTC)
(3) Recording start time (UTC)
(4) Recording type
E: Event
M: Manual recording
R: Recording-mode stream
T: Timer
U: Upload
Note
• The file creation time will be earlier than the actual start of recording time.
• If multiple video files were created because recording continued for several seconds or more, a new file name with different values for
(2) and the sequential number ending will be used. In the above example, if recording starts at 16:09:19, and the next file is switched to
4 seconds later, the file name will be as follows.
20150910070623-070619-M00_508.mov
Since this is a continuation of the recording that started at 16:09:19, the recording start time (3) will remain as “070619”. The sequential
number at the end of the file name will be increased by one increment.
20150910 070618-070619-M 00 _ 507.mov
(1) (2) (3) (4)
150
According to the setting item, you can specify parameters using modifier “% characters”.
Note
• A runtime error will occur if the specified name does not match.
• If this modifier is not defined, “%” will be deleted.
Modifiers
Modifiers Meaning Description of character string entered
%n Reason for capture (number) 0 (test) | 1 (External device input) | 33 (Timer 1) | 34 (Timer 2) | 35 (Timer 3) | 36 (Timer 4) |
145 (Volume detection) | 161 (Intelligent Function Detection Setting 1) |
162 (Intelligent Function Detection Setting 2) | 163 (Intelligent Function Detection Setting 3) |
164 (Intelligent Function Detection Setting 4) | 165 (Intelligent Function Detection Setting 5) |
166 (Intelligent Function Detection Setting 6) | 167 (Intelligent Function Detection Setting 7) |
168 (Intelligent Function Detection Setting 8) | 169 (Intelligent Function Detection Setting 9) |
170 (Intelligent Function Detection Setting 10) | 171 (Intelligent Function Detection Setting 11) |
172 (Intelligent Function Detection Setting 12) | 173 (Intelligent Function Detection Setting 13) |
174 (Intelligent Function Detection Setting 14) | 175 (Intelligent Function Detection Setting 15)
%N Reason for capture
(character string)
<External input device name (alphanumeric characters)> | NULL (blank entry or timer event test)
%X Width of video Number of pixels in horizontal direction
%Y Height of video Number of pixels in vertical direction
%C Camera number 1
%D Camera name Setting for [Camera Name (alphanumeric characters)]
%P Pan position -174.99 – 175.00 0
%T Tilt position -90.00 – 0.00 0
%Z Zoom position 0.01 – 300.00 0
%V Camera server VB-S30D/VB-S31D/VB-S800D/VB-S900F/VB-S805D/VB-S905F
%y Year of capture time 2001 – 2031
%m Month of capture time 01 – 12
%d Day of capture time 01 – 31
%w Day of week of capture time 0 – 6 (Sunday to Saturday)
%H Hours of capture time 00 – 23
%M Minutes of capture time 00 – 59
%S Seconds of capture time 00 – 59
%s Milliseconds of capture time 000 – 999
%z Time zone of capture time -1200 – +1300
%a Weekday name of capture
time
Sun | Mon | Tue | Wed | Thu | Fri | Sat
%b Month name of capture time Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec
%h Host Name
Modifiers
151
Appendix
6
Available Modifiers
The modifiers that can be used for each setting item are specified below.
[HTTP Upload] (p. 54)
[Parameter (query string)]
All modifiers can be used.
[FTP Upload] (p. 54)
[Subdirectory Name to Create]
Only the modifiers %y,%m,%d,%w,%H,%h,%n can be used.
[File Name to Create]
Only the modifiers %y,%m,%d,%w,%H,%M,%S,%s,%n can be used.
[E-mail Notification] (p. 55)
[Message Body]
All modifiers can be used.
152
Before contacting the dealer where you purchased the product or Canon's Customer Service Center, check the items
specified as follows. If a log message is displayed, check the details of the message and corresponding countermeasure in
the log message list.
Note
For details on troubleshooting for Camera Management Tool, please refer to the "Camera Management Tool User Manual".
Troubleshooting
Problem Countermeasures
The camera does not start. • Check if the LAN cable is connected correctly.
• Turn the camera off and on again (see “Installation Guide” > “Connecting the
Camera”).
The top page of the camera is not displayed. • Check if the LAN cable is connected correctly.
• Check if the network to which the camera is connected is set up correctly. In
particular, check if the IP address, subnet mask and default gateway address are set
within the ranges supported by the applicable network.
• If you have changed the IP address, the new address will not become effective until
the camera is rebooted.
• Check if the correct URI (camera IP address) is entered in your web browser (p. 29,
p. 126).
• Check whether the connection is from a computer whose access is blocked in
[Access Control] on the Setting page.
• Check the authentication method, [User Name], [Password], combination of
certificates, and network rules for connection in [802.1X] on the Setting page with the
system administrator.
The Admin Tools will not start.
The Admin Viewer will not start.
• “Your web browser is not supported.” If this message is displayed, use Internet
Explorer 8 or greater.
• “Application could not be started. Install .NET Framework x.x (x is the version).” If this
message is displayed, install the corresponding version of .NET Framework or enable
settings (p. 18).
• “JavaScript is not available or disabled on your web browser.” If this message is
displayed, set [Active Script] to [Enable] in Internet Explorer's security settings. (See
(3) below for instructions on how to set this.)
• “The settings from (1) to (3) below must be carried out to use the Admin Viewer and
Admin Tools.” If this message is displayed, set the following.
(1) Install the Admin Tools Certificate with the installer (p. 26).
(2) When using Internet Explorer 9 or greater, follow the steps in “Registering the
IP address of the Camera as a Trusted Site” (p. 19) and add this web site to
[Trusted sites] in Internet Explorer's security settings.
(3) In Internet Explorer click [Tools] > [Internet Options] > [Security] > [Custom
level] and under the Security Settings list, set [XAML browser applications],
[File download] and [Launching programs and files in an IFRAME] to [Enable].
Video is not displayed. • To improve video quality, refer to “[Video] Setting Video Size, Quality and Frame Rate”
in “Chapter 3 Setting Page” (p. 48) to change settings and make adjustments.
• Up to 30 viewers can access the camera at the same time. If this limit has been
exceeded, video is not displayed and a message appears.
• When you are using Internet Explorer 10 or 11 in a 64-bit operating system and the
camera is registered as a trusted site and protected mode is enabled, reception and
playback of H.264 video may be disabled. If this occurs, disable protected mode.
There is no audio. • If there is no audio, check the audio server settings of the camera and also check the
sound and audio device settings for the computer.
• If you are using the Admin Viewer with the administrator authorities, check if the
camera is connected to the RM Viewer or another viewer that lets the administrator
use audio.
• In VB Viewer, audio cannot be used if the Canon Network Camera Audio Receiver
add-on is not installed.
• When you are using Internet Explorer 10 or 11 in a 64-bit operating system and the
camera is registered as a trusted site and protected mode is enabled, reception and
playback of audio may be disabled. If this occurs, disable protected mode.
Troubleshooting
153
Appendix
6
The camera cannot be controlled. • If you connect the Admin Viewer as an administrator, you will have exclusive
possession of the camera control privileges. If you connect to the Admin Viewer as an
Authorized User, you cannot control the camera unless the administrator releases
camera control. Consult the Administrator (p. 124).
• The pan, tilt, focus and zoom may operate abnormally if the pan and
tilt operational durability estimates are exceeded (p. 130).
The viewer gets disconnected. • Check the network and computer for abnormality.
• Reboot the computer and connect again.
You forgot your password. • You can initialize all settings of the camera excluding date and time using the reset
switch (p. 165). After performing initialization, use the Camera Management Tool to
register the administrator password again. Note, however, that network settings such
as the IP address and subnet mask will be initialized and must be set again.
Data cannot be uploaded. • Check the upload destination under the [Upload] menu in the Setting page, as well as
the upload operation upon event under the [Event] menu, to see if both are set
correctly.
• You can perform an operation check based on the currently set upload destination by
running a test (p. 54) from the [Upload] menu.
• Check [Maintenance] > [View Logs] or logs on the server to check the detailed
operating environment. For [View Logs], see “Application (Uploader) Messages”
(p. 155). Also see “Important” in p. 53.
• For the server settings, contact your System Administrator.
You cannot use recording-mode stream
transmission.
• You cannot use recording-mode stream transmission if [Upload] > [Upload] is set to
HTTP or FTP. Set [Upload] to [Upload Disabled] (p. 53).
Video cannot be recorded on a memory card. • To record video to a memory card when an event occurs, check the [Video Record
Action] settings under [Event] in the setting page. When [Video Record Action] is set
to [Upload], change it to [Record to Memory Card].
• When recording-mode stream video that could not be transmitted due to network
errors or video for which the HTTP/FTP upload failed is not stored on the memory card,
check [Operation Settings] under [Memory Card] in the setting page. When
[Operation Settings] is set to [Save Log], change it to [Save Logs and Videos].
• To manually save recordings to a memory card, obtain camera control privileges.
Files cannot be saved in the Settings page or
Admin Tools.
• Windows prohibits saving to certain folders. Accordingly, an attempt to save a file may
fail. Specify [Documents], [Pictures] and other folders.
A message indicating “Cannot access the
memory card. Please recreate the video
management information on the Setting
page.” appears when an attempt is made to
start up the Recorded Video Utility.
• Select [Memory Card Information] under [Memory Card] in the setting page to check
[Video Management Information Status]. When [Video Management Information
Recreation Required] is displayed, click [Exec] in [Recreate Video Management
Information] under [Memory Card Operations]. When video management information
has been recreated, make sure that [Video Management Information Status] is
[Normal].
Problem Countermeasures
154
Log Messages on the Camera
Log messages are classified into the following types.
Note
If no content is recorded in a log for approximately two hours, “--
MARK --” will be recorded in the message area.
Application (Camera) Messages
W001 Starting and stopping of system [info]
W030 Startup and shutdown of WebView Livescope
Client [info]
W031 Transmitted video data size [info]
W040 Clearing to external memory [info]
W101 Invalid user name [notice]
W102 Invalid password [notice]
W130 Buffer recovered [notice]
W201 Invalid panorama image [warning]
W230 Buffer overflow [warning]
List of Log Messages
Category Level Code Fault level
crit Error 4xx Software-level failure
(Task operations will
stop)
err Error 3xx Operational error
(Operations will
continue)
warning Warning 2xx Non-operational error
notice Warning 1xx Error external to the
system
info Information 0xx Information on normal
operation
Description %1 webview (W001)
%1 Starting or stopping
Meaning wvhttp server (webview) has started or
stopped.
Description %1%2 host=<Host>, user=<User>, prio=<
Priority>(W030)
%1 W: WebView session, V: Session-less video
client, N: Session-less event client
%2 +: Connect, -: Disconnect
Meaning The camera server client was connected or
disconnected.
Description %1= host=<Host>, user=<User>,
video=<jpg | h264>:<Number of frames>
(W031)
%1 W: WebView session, V: Session-less video
client
Meaning When a client disconnected, the total data
that was sent to the client displayed in
number of frames.
Description %1 the image storing - %2 (W040)
%1 Starting or stopping
%2 Reason for starting/stopping
Meaning Started or stopped clearing stream
recording to external memory.
Description user <User name> not found (W101)
Meaning The camera was accessed by an
unauthorized user.
Description user <User name> password mismatch
(W102)
Meaning The password is invalid
Description stream buffer recovered (W130)
Meaning Video buffer for stream recording has
recovered.
Description corrupt panorama image - ignored (W201)
Meaning Panorama image information acquisition
failed.
Description stream buffer overflowed (W230)
Meaning The video buffer for the stream recording
overflowed and video was discarded.
List of Log Messages
155
Appendix
6
Application (Uploader) Messages
A004 Starting and stopping of uploader [info]
A040 Number of uploads (MAIL) [notice]
A041 Number of uploads (FTP) [notice]
A042 Number of uploads (HTTP) [notice]
A120 Resolution of upload destination name failed
[notice]
A121 Connection to upload destination failed [notice]
A122 Connection to upload destination failed [notice]
A134 Invalid upload setting (FTP/HTTP mode) [notice]
A135 Invalid upload setting (FTP PORT/PASV mode)
[notice]
A136 Invalid upload setting (HTTP notification only/
image mode) [notice]
A137 Invalid upload setting (E-mail notification)
[notice]
A138 Invalid upload setting (E-mail notification
authentication mode) [notice]
A274 Event buffer for upload overflowed [warning]
A275 Video buffer for upload overflowed [warning]
Description %1 uploader (A004)
%1 Starting or stopping
Meaning The uploader was started or stopped.
Description uploader mail: normal=%1 test=%2 (A040)
%1 Number of normal uploads.
%2 Number of test uploads.
Meaning Shows the number of uploads executed.
Description uploader ftp: normal=%1 test=%2 (A041)
%1 Number of normal uploads.
%2 Number of test uploads.
Meaning Shows the number of uploads executed.
Description uploader http: normal=%1 test=%2 (A042)
%1 Number of normal uploads.
%2 Number of test uploads.
Meaning Shows the number of uploads executed.
Description uploader cannot resolve the server name
(A120)
Meaning The name of the upload destination could
not be resolved.
Description uploader cannot connect the server (A121)
Meaning Execution of connect to upload destination
failed.
Description uploader cannot connect the server (A122)
Meaning The upload destination could not be
connected due to a reason other than A120
and A121.
Description ftp/http mode invalid. uploader set <none>
forcibly (A134)
Meaning The upload mode setting is invalid. The
upload function was forcibly disabled.
Description ftp port/pasv mode invalid. uploader set
<pasv> forcibly (A135)
Meaning The PORT/PASV mode setting in connection
with FTP upload is invalid. The PASV mode
was forcibly set.
Description http notice/image mode invalid. uploader
set <image> forcibly (A136)
Meaning The notification only/image mode setting in
connection with HTTP upload is invalid. The
image mode was forcibly set.
Description mode invalid. uploader set <none> forcibly
(A137)
Meaning The e-mail notification setting is invalid. E-
mail notification was forcibly disabled.
Description authentication mode invalid. uploader set
<smtp auth> forcibly (A138)
Meaning The setting for e-mail notification
authentication mode is invalid.
“SMTP_AUTH” was forcibly set.
Description event queue is full (A274)
Meaning Event buffer for upload overflowed.
Countermeasure
Make adjustments to reduce the number of
event occurrences.
Description buffer queue is full (A275)
Meaning Video buffer for upload overflowed.
Countermeasure
Make adjustments to reduce the number of
event occurrences. Also adjust the video
quality, video size and frame rate for upload.
156
A470 Uploader initialization failed [crit]
Application (Audio Server) Messages
B001 Starting and shutdown of audio server [info]
B011 Audio client connected [info]
B012 Audio client closed [info]
B102 Client connection denied [notice]
B103 Client forcibly disconnected [notice]
B402 Audio server initialization failed [err]
B403 Settings change failed [err]
Application (Video-Related) Messages
V001 Starting and shutdown of video server [info]
V020 Starting intelligent service [info]
V021 Shutting down intelligence service [info]
Description uploader initialization failure - %1 (A470)
%1 Error number
Meaning The uploader could not be initialized.
Countermeasure
If the problem persists after rebooting the
camera, the camera is faulty, arrange for
servicing.
Description %1 audio. (B001)
%1 starting | stopping
Meaning The audio server was started/shut down.
Description [%1] %2 connected n=%3 (B011)
%1 Client type (send | recv)
%2 Client host IP address
%3 Total number of clients
Meaning An audio client was connected.
Description [%1] %2 closed n= %3 (B012)
%1 Client type (send | recv)
%2 Client host IP address
%3 Total number of clients
Meaning An audio client was disconnected.
Description %1 request denied [%2] (B102)
%1 Client host IP address
%2 Denial type (41 | 43 | ...)
Meaning Client connection was denied due to an
authentication error (41), time specification
error (42), insufficient resource (43),
specification of unsupported codec (45),
specification of unpermitted user level (47),
too many clients (49) or invalid operation
mode (4a).
Countermeasure
41: Check user name, password or user list
used when connecting. 42: Check playtime
or maximum connection time settings used
when connecting. 43: Reconnect or restart.
45: Use supported client software. 47:
Check user level used when connecting. 49:
Check client number settings. 4a: Check if
usage of audio server is enabled.
Description %1 access denied [%2] (B103)
%1 Client host IP address
%2 Denial type (41 | 42 | 4a)
Meaning
Connection was initially permitted, but the setting
has subsequently been changed to prohibit
access, thereby triggering a forced disconnection
(the denial type is the same with B102).
Description wvaudio initialization error [%1] (B402)
%1 Error number
Meaning The audio server could not be initialized.
The audio server stops.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description cannot set config [%1:%2] (B403)
%1 Error notification number
%2 Error number
Meaning The settings could not be updated. The
audio server stops.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description %1 video (V001)
%1 Starting or stopping
Meaning The video server was started/stopped.
Description starting intelligent. (V020)
Meaning Intelligent service was started.
Description shutdown intelligent. (V021)
Meaning Intelligent service was shut down.
List of Log Messages
157
Appendix
6
V200 Video input warning [warning]
V300 Video input error [err]
V320 Internal error in intelligent service [err]
V321 Pseudo mode setting error in intelligent service
[err]
V400 Video input initialization error [crit]
V401 Video input command error [crit]
V402 Video input frozen [crit]
V403 Video input error [crit]
Description video %1 warning - %2 (V200)
%1 Video number
%2 Error number
Meaning An error that permits recovery of the video
input system was detected.
Countermeasure
Change video size or video quality, or
decrease data size for each JPEG image.
Description video %1 warning - %2 (V300)
%1 Video number
%2 Error number
Meaning An error in the video input was detected that
may adversely affect the operation of the
camera.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description cannot work intelligent [%1] [%2] [%3] .
(V320)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An internal error occurred in intelligent
service.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description pseudo mode setting fail. (V321)
Meaning An error occurred in the pseudo mode
setting of intelligent service.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description video %1 initialization failure - %2 (%3)
(V400)
%1 Video number
%2 Process description
%3 Error details
Meaning The video input function was stopped
because the video input system could not
be initialized.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description video %1 command error - %2 (%3) (V401)
%1 Video number
%2 Process description
%3 Error details
Meaning The video input function was stopped
because a video input command could not
be processed.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description video %1 stalled (V402)
%1 Video number
Meaning The video input function was stopped
because video generation stopped.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description video %1 fatal error - %2 (V403)
%1 Video number
%2 Error number
Meaning The video input function was stopped
because an error that does not permit
recovery of the video input system was
detected.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
158
V420 Could not start intelligent service [crit]
V421 Intelligent service error [crit]
Application (Memory Card) Messages
M001 Starting and stopping of memory card control
module [info]
M203 Not enough space on memory card [warning]
M204 Invalid file removed [warning]
M207 Memory card removed before unmounting
[warning]
M208 Video file limit [warning]
M301 Memory card control module error [err]
Application (Camera) Messages
C001 Starting and stopping of camera control module
[info]
C002 Camera application started [info]
C201 Day/Night mode switching warning [warning]
C211 Camera control command overflow [warning]
Description intelligent initialization error [%1] [%2] .
(V420)
%1 Error number
%2 Cause of error
Meaning Failed to initialize intelligent service.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description intelligent working error [%1] [%2] . (V421)
%1 Error number
%2 Cause of error
Meaning An error that does not permit recovery
occurred while intelligent service was
running.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description %1 sdctrl (M001)
%1 Starting or stopping
Meaning The memory card control module (sdctrl)
has started or stopped.
Description There is not available space (M203)
Meaning Insufficient memory card capacity.
Description Invalid file %1 was removed. (M204)
%1 Name of removed file
Meaning An invalid file was removed.
Description Memory card was pulled before unmount.
(M207)
Meaning The memory card was removed while still
mounted.
Description Video file count of %1 reached upper limit.
(M208)
%1 Video type ([Upload], [Recording-Mode
Stream], [Manual], [Timer], [Event])
Meaning The upper limit for the number of video files
that can be saved for that video type has
been reached.
Logs will be output for [Timer] and [Event]
only when [Overwrite videos] is set to
[Disable].
Description %1 process failure (M301)
%1 mount or unmount
Meaning Mount or unmount process failed.
Description %1 camerad (C001)
%1 starting | stopping
Meaning The camera control module started/
stopped.
Description starting cameraappl (C002)
Meaning The camera application started.
Description Can’t switch Day/Night mode, because
current mode is Auto. (C201)
Meaning Could not switch day/night mode.
Countermeasure
Set Day/Night mode manually.
Description command queue overflowed (C211)
Meaning The camera control command queue
overflowed, and some commands were
discarded.
Countermeasure
Allow a longer interval (200 ms) for sending
the camera control command.
List of Log Messages
159
Appendix
6
HTTP Server Messages
H143 User name specification error [notice]
H144 Password specification error [notice]
H201 Timeout disconnect [warning]
System Messages
S001 System started [info]
S002 System settings changed [info]
S010 Event service started [info]
S011 Event service shut down [info]
S012 External device service started [info]
S013 External device service shut down [info]
S014 Timer service started [info]
S015 Timer service shut down [info]
S070 Change to SSL certificate [info]
S302 Error on saving settings [err]
S303 Error on saving settings [err]
Description (http_auth.c.XXX) get_password failed,
IP:%1 (H143)
%1 IP address
Meaning An unknown user was specified in user
authentication.
Description (http_auth.c.XXX) password doesn't match
for %1 username%2, IP:%3 (H144)
%1 URL XSS vulnerability countermeasure
implementation (process equivalent to ftpd)
%2 User Name
%3 IP address
Meaning A wrong password was specified in user
authentication.
Description a request for %1 timed out after writing %d
seconds (H201)
%1 Request URI
%d 360 (Timeout time)
Meaning Disconnected due to HTTP server timeout
(360 sec.).
Description starting paramd (S001)
Meaning Parameter management module started.
Description Updated system settings. (S002)
Meaning Settings not requiring rebooting were
changed.
Description starting event (S010)
Meaning The event service was started.
Description shutdown event (S011)
Meaning The event service was shut down.
Description starting extio (S012)
Meaning The external device input/output service
was started.
Description shutdown extio (S013)
Meaning The external device input/output service
was shut down.
Description starting timer (S014)
Meaning The timer service was started.
Description shutdown timer (S015)
Meaning The timer service was shut down.
Description ssl: succeeded to %1 certificate (S070)
%1 generate | load | delete | restore
Meaning A certificate was generated/loaded/deleted/
restored
Countermeasure
None
Description Can’t update system settings (S302)
Meaning An error generated while the system was
saving a setting. Setting could not be saved.
Countermeasure
Provide enough memory space by deleting
unnecessary files in the user memory area,
etc.
Description Can’t update files of system settings (S303)
Meaning An error generated while the system was
saving a setting. Setting could not be saved.
Countermeasure
Provide enough memory space by deleting
unnecessary files in the user memory area,
etc.
160
S307 Error on saving settings [err]
S310 Working error in event service [err]
S311 Working error in external input/output service
[err]
S312 Working error in timer service [err]
S410 Event service initialization error [crit]
S411 External input/output service initialization error
[crit]
S412 Timer service initialization error [crit]
S413 Timer service runtime error [crit]
RTP-related Messages
R001 Startup of RTP distribution module [info]
R002 Stopping of RTP distribution module [info]
Description (vbadmin.c XXX) Can't update system
settings (S307)
Meaning An error generated while the settings were
saved by the setup protocol. Setting could
not be saved.
Countermeasure
Provide enough memory space by deleting
unnecessary files in the user memory area, etc.
Description cannot work event [%1] [%2] [%3] (S310)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An error occurred while the event service
was running.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description cannot work extio [%1] [%2] [%3] (S311)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An error occurred while the external input/
output device service was running.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description cannot work timer [%1] [%2] [%3] (S312)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An internal error occurred in the timer service.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description event initialization error [%1] [%2] (S410)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the
event service.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description extio initialization error [%1] [%2] (S411)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the
external input/output device service.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description timer initialization error [%1] [%2] (S412)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of the
timer service.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description timer working error [%1] (S413)
%1 Error number
Meaning An error occurred while the timer service
was running.
Countermeasure
If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description starting media_plane (R001)
Meaning RTP distribution module started.
Description stopping media_plane (R002)
Meaning RTP distribution module stopped.
List of Log Messages
161
Appendix
6
R003 RTSP PLAY request received [info]
R004 RTSP TEARDOWN request received [info]
R005 Starting multicast [info]
R006 Stopping multicast [info]
R101 RTP session timeout [notice]
R102 Information acquisition failure (RTP payload
size) [notice]
R102 Information acquisition failure (IP address)
[notice]
R103 RTSP authentication failure [notice]
R107 RTSP authentication failure or missing
authentication information [notice]
Description PLAY received: client_IP=%1, profile=%2,
num_of_sessions=%3 (V=%4, A=%5,
M=%6, BC=%7) (R003)
%1 Client IP address
%2 Profile name of requested PLAY
%3 Total number of client sessions
%4 Total distribution count of Video stream
%5 Total distribution count of Audio stream
%6 Total distribution count of Metadata stream
%7 Total distribution count of
AudioBackChannel
Meaning RTSP PLAY request was received.
Description TEARDOWN received: client_IP=%1,
profile=%2, num_of_sessions=%3 (V=%4,
A=%5, M=%6, BC=%7) (R004)
%1 Client IP address
%2 Profile name of requested TEARDOWN
%3 Total number of client sessions
%4 Total distribution count of Video stream
%5 Total distribution count of Audio stream
%6 Total distribution count of Metadata stream
%7 Total distribution count of
AudioBackChannel
Meaning RTSP TEARDOWN request was received.
Description start multicast: profile=%1,
num_of_sessions=%2 (V=%3, A=%4,
M=%5, BC=%6) (R005)
%1 Client IP address
%2 Profile name of requested
MulticastStreaming START
%3 Total distribution count of Video stream
%4 Total distribution count of Audio stream
%5 Total distribution count of Metadata stream
%6 Total distribution count of
AudioBackChannel
Meaning Multicast was started.
Description stop multicast: profile=%1,
num_of_sessions=%2 (V=%3, A=%4,
M=%5, BC=%6) (R006)
%1 Client IP address
%2 Profile name of requested
MulticastStreaming STOP
%3 Total distribution count of Video stream
%4 Total distribution count of Audio stream
%5 Total distribution count of Metadata stream
%6 Total distribution count of
AudioBackChannel
Meaning Multicast was stopped.
Description session timeout: session ID=%1 (R101)
%1 Session ID
Meaning RTP session has timed out.
Description cannot get parameter: RTP_payload_size
(R102)
Meaning Information acquisition has failed (RTP
payload size).
Description cannot get parameter: IP_address (R102)
Meaning Information acquisition has failed (IP
address).
Description RTSP authorization error (R103)
Meaning RTSP authentication has failed.
Description RTSP Error: error_code=401: Unauthorized
(R107)
Meaning RTSP authentication has failed or
authentication information is missing.
162
R107 Insufficient resources [notice]
R301 Distribution communication error [err]
R302 Parameter acquisition failure [err]
R303 Metadata distribution initialization failure [err]
R304 Abnormal termination of client [err]
R304 Client disconnected [err]
R304 Client disconnected [err]
R305 RTSP processing error [err]
Description RTSP Error: error_code=503: Service
Unavailable (R107)
Meaning Service unavailable due to insufficient
resources.
For example, the max. number of RTP
connections exceeded.
Description message queue open error: %1 (R301)
%1 Modules that generate errors
RTP_CTRL_QUEUE
RTP_DATA_QUEUE
VIDEO_CTRL_QUEUE
VIDEO_DATA_QUEUE
AUDIO_CTRL_QUEUE
AUDIO_DATA_QUEUE
EVENT_CTRL_QUEUE
RECVQ_META
SENDQ_MEDIA
Meaning A communication error occurred between
modules.
Countermeasure
If the problem persists after repeated
attempts and rebooting, the camera may be
faulty. Arrange for servicing.
Description cannot get parameter: %1 (R302)
%1 user_account: User account
IP_address: IP address of the camera
profile_media_configuration:
MediaConfiguration information
RTSP_port_number: RTSP port number
Meaning Parameter acquisition has failed.
Description metadata initialization error (R303)
Meaning Metadata distribution initialization has failed.
Description delete session from some kind of error:
client_IP=%1 (R304)
%1 Client IP address
Meaning The client session terminated abnormally.
Description connection reset by peer: client_IP=%1
(R304)
%1 Client IP address
Meaning Disconnected from client.
Description RTP/HTTP connection closed by client
(R304)
Meaning Disconnected from client.
Description RTSP Error: error_code=500: Internal Server
Error (R305)
Meaning An RTSP processing error occurred.
163
6
Appendix
Messages Displayed in the Information Field
Messages displayed in the information field of the viewer are classified into the following three types.
Information Messages
Warning Messages
List of Viewer Messages
Icon Category Explanation
Information Message Help messages on various buttons, pull-down lists, etc., as well as frame rate and other
information from the camera are shown.
Warning Message A message will be displayed notifying the user when camera control privileges cannot
be obtained, the audio session stops, etc.
Error Message Displayed when a system error occurs in the viewer.
Message Explanation
Connection closed by the camera. The camera was disconnected.
Audio connection has been closed. The video session has continued after the audio session was disconnected.
Camera control gained. Displayed when camera control is obtained. You can operate the camera.
Camera control lost. Displayed when camera control is released.
You cannot operate the camera
until you get camera control privileges again.
Use the menu displayed by right-clicking to exit the full
screen mode.
When switched to full screen mode
Recording to memory card aborted. When recording to memory card was completed successfully
The connection was terminated because the password
has been changed.
When the password of the account used to connect to the camera was
changed during camera connection and then any WV-HTTP command was
issued
Message Explanation
{n}fps Pan: {p} Tilt: {t} Zoom: {z} Communicating with the camera normally
The connection was terminated because the image has
been flipped.
When the video was flipped during camera connection (camera connection
is terminated when a video is flipped)
Message Explanation
{n}fps Pan: {p} Tilt: {t} Zoom: {z} Communicating with the camera normally (when Digital PTZ is enabled)
{n}fps Communicating with the camera normally (when Digital PTZ is disabled)
Message Explanation
Could not connect to the camera. Connection failed due to an invalid IP address, etc.
The camera is busy. The connection limit was exceeded.
164
Failed to get camera control privileges. The request for camera control privileges was denied because the camera
was being used by the Admin Viewer, etc.
Failed to establish audio connection. Connection for audio reception failed.
You are not connected to the camera. An attempt was made to operate the camera when the camera was not
connected.
Please get camera control privileges.
An attempt was made to operate the camera without camera control privileges.
Another user is already connected as an administrator. The Admin Viewer is already connected to the camera.
You do not have the camera access privilege. Cannot connect to the camera due to address restriction or outside service
hours.
Viewer is unavailable. You did not agree to the terms of use on the License Agreement screen.
Insufficient memory card capacity. Recording to a memory card with insufficient capacity was attempted.
Recording to memory card is not allowed. Recording to memory card failed because [Operation Settings] in [Memory
Card Operations] was not set to [Save Logs and Videos].
Recreating video management information. Video management information for the memory card is being recreated.
Video Management Information Recreation Required. Video management information for the memory card must be recreated.
Audio reception is restricted. Audio reception is being restricted.
The specified camera is not a network camera, or it is not
a supported model.
Displayed when connecting to a camera other than the specified camera
using admin tool with proxy authentication support.
User authentication failed. Camera authentication failed.
The viewer is already connected in another window. The viewer is already available in another window.
No audio device. The [Audio] button has been clicked when there is no audio device or the
audio device has been disabled in the computer.
Failed to initialize Canon Network Camera Audio
Receiver.
ActiveX plugin is not installed within ten seconds after clicking the [Audio]
button.
Message Explanation
You cannot control the camera unless you exit Viewer
PTZ.
The video was clicked with the Viewer PTZ in the ON state while you have
control privileges.
Message Explanation
Start Digital PTZ or Viewer PTZ. The PTZ sliders or the video display area were clicked with Digital PTZ and
Viewer PTZ in the OFF state.
Message Explanation
165
6
Appendix
If you have forgotten the settings and want to set the camera from the beginning, restore the factory default settings first.
It is recommended that you create a backup file using [Back Up Settings] in the Camera Management Tool before restoring
the factory default settings.
Note
• For details on using Camera Management Tool, please refer to “Camera Management Tool User Manual”.
• For factory default settings, please refer to p. 167.
Restoring the Initial Setting from the
Maintenance Page in the Web Browser
To display the settings menu, you need to enter the IP
address of the camera, user name and administrator
password (p. 29).
The maintenance page appears.
A confirmation message appears, asking if you want
to restore the default settings. To restore the default
settings, click [OK].
Except for the following items, all user-defined
settings will be discarded and restored to factory
default settings after the camera is rebooted.
– Administrator password
– Network LAN, IPv4, IPv6
– Date and time
– Host access restrictions for access control
–SSL/TLS
– 802.1X
Restoring Factory Default Settings with
the Reset Switch on the Camera
If you have forgotten or do not know the IP address of the
camera or your Administrator password, you cannot
operate the camera via the network. In this case, press
the reset switch at the back of the camera.
For top cover removal, see the “Installation Guide”
included with the camera.
Restore Default Settings
1Launch the web browser and display the settings
menu.
2On the Setting Menu page, click [Maintenance].
3Click [Exec] under [Restore Default Settings].
Caution
• You must not turn off the camera while it is
performing the [Restore Default Settings]
operation. Turning off the camera at this stage
may result in disabling its ability to boot correctly.
• Once [OK] is clicked, you can no longer stop the
process of restoring the default settings.
1For VB-S30D/VB-S31D/VB-S800D/VB-S805D,
remove the top cover.
166
There is no on/off switch on the camera. Turn the
camera on and off by plugging in or unplugging the
LAN cable (PoE power supply).
The reset switch is located in a recessed area. Push
the switch using the tip of a slender object such as a
clip.
All settings of the camera, except for the date and
time, are restored to factory default settings.
For top cover attachment, see the “Installation Guide”
included with the camera.
2Turn off the camera.
3Turn on the power while pushing the reset switch, and
keep pushing the reset switch for 5 seconds or more.
Important
If the reset switch is pushed, network-related settings will also
be restored to factory default settings including the camera's IP
address, subnet mask, default gateway address, etc.
Accordingly, you can no longer operate the camera from the
computer you were using to connect to the camera before.
When initializing the camera, use the “Camera Management
Tool” installed in your computer to set an IP address
appropriate for the environment in which the camera is used.
Reset Switch
4For VB-S30D/VB-S31D/VB-S800D/VB-S805D, attach
the top cover.
Reset Switch
167
6
Appendix
List of Factory Default Settings
Item Setting
• User Name (Administrator ID) root
• Administrator password
•LAN
LAN Interface Auto
Maximum Packet Size 1500
•IPv4
IPv4 Address Setting Method Manual
IPv4 Address 192.168.100.1
Subnet Mask 255.255.255.0
IPv4 Default Gateway Address
AutoIP Enable
IPv4 Address (AutoIP)
•IPv6
IPv6 Enable
Auto (RA) Enable
Auto (DHCPv6) Enable
IPv6 Address (Manual)
Prefix Length 64
IPv6 Default Gateway Address
IPv6 Address (Auto)
• DNS
Name Server Address 1
Name Server Address 2
Auto-Setting of Name Server
Address
Disable
Host Name
Host Name Registration with
DDNS
Disable
Search Domain
Search Domain List
• mDNS
mDNS Enable
•SNMP
Use SNMP v1 and v2c Disable
Use SNMP v3 Disable
Administrator Contact
Information
Administration Function
Name
VB-S30D
VB-S31D
VB-S800D or
VB-S805D
VB-S900F or
VB-S905F
Installation Location
• SNMP v1 and v2c Server
Community Name
• SNMPv3 Server
User Name
Security Level No authentication and no
encryption
Authentication Algorithm MD5
Encryption Algorithm DES
• Current Date and Time
• Setting
Setting Method Set manually
Auto-Setting of NTP Server Disable
NTP Server
Time Zone (GMT+09:00) Osaka,
Sapporo, Tokyo
Daylight Saving Time Disable
• Camera Name
Camera Name (alphanumeric
characters)
Camera
• Initial Camera Settings
AE Mode Auto
Slow Shutter Disable
Shutter Speed 1/100
Exposure Compensation 0
Metering Mode Center-Weighted
Focus Mode Auto
Smart Shade Control Disable
Smart Shade Control Level 1 (Mild)
White Balance Auto
R Gain 255
B Gain 255
Noise Reduction Standard
Sharpness 3
Item Setting
168
Color Saturation 4
Haze Compensation Disable
Haze Compensation Level 4
Day/Night Day Mode
• Camera Control
Digital Zoom Disable
AGC Limit 5
Smart Shade Control Strength
(Auto)
Medium
Haze Compensation Strength
(Auto)
Medium
Pan/Tilt Speed Control Control by zoom position
• Day/Night (when Auto is set)
Switching Brightness Standard
Response (sec.) 20
• Installation Conditions
LED Setting Turn On
Image Flip Disable
• Camera Position Control
Restricted to Presets No Restriction
Camera Position without Control Do not return to Home
Position
• External Input Device
Device Name (alphanumeric
characters)
• External Output Device
Device Name (alphanumeric
characters)
VB-S30D/VB-S31D/VB-S800D/VB-S900F
• All Videos
Video Size Set 1920 x 1080 / 960 x 540 /
480 x 270
• JPEG
Video Quality: 480 x 270 3
Video Quality: 960 x 540 3
Video Quality: 1920 x 1080 3
Video Quality: Digital PTZ
(VB-S800D/VB-S900F)
3
Video Size: video Transmission 480 x 270
Maximum Frame Rate: Video
Transmission
30.0
Video Size: Upload / Memory
card
480 x 270
Item Setting
• H.264(1)
Video Size 480 x 270
Bit Rate Control Use bit rate control
Video Quality 3
Target Bit Rate (kbps) 2048
Frame Rate (fps) 30
I Frame Interval (sec) 1
• H.264(2)
H.264(2) Disable
Video Size 480 x 270
Bit Rate Control Use bit rate control
Video Quality 3
Target Bit Rate (kbps) 2048
Frame Rate (fps) 30
I Frame Interval (sec) 1
VB-S805D/VB-S905F
• All Videos
Video Size Set 1280 x 720 / 640 x 360 /
320 x 180
•JPEG
Video Quality: 320 x 180 3
Video Quality: 640 x 360 3
Video Quality: 1280 x 720 3
Video Quality: Digital PTZ 3
Video Size: Video Transmission 320 x 180
Maximum Frame Rate: Video
Transmission
30.0
Video Size: Upload / Memory
card
320 x 180
• H.264(1)
Video Size 320 x 180
Bit Rate Control Use bit rate control
Video Quality 3
Target Bit Rate (kbps) 2048
Frame Rate (fps) 30
I Frame Interval (sec) 1
• H.264(2)
H.264(2) Disable
Video Size 320 x 180
Bit Rate Control Use bit rate control
Video Quality 3
Target Bit Rate (kbps) 2048
Item Setting
List of Factory Default Settings
169
Appendix
6
Frame Rate (fps) 30
I Frame Interval (sec) 1
Common to all models
• On-screen display
Date display Disable
Position of date display Upper left
Format of date display YYYY/MM/DD
Time display Disable
Position of time display Upper left
Text display Display nothing
Position of text display Upper left
Text string display
Color of text White
Background color Black
Color depth of text and
background
Fill text and background
color
• RTP Server
RTP Enable
RTSP Authentication Method Digest Authentication
RTSP Port 554
• Audio Multicast
Multicast Address 0.0.0.0
Multicast Port 0
Multicast TTL 1
• RTP Streaming 1
Video Size 480 x 270 JPEG*
Frame Rate 5
Multicast Address 0.0.0.0
Multicast Port 0
Multicast TTL 1
Audio Transmission Disable
• RTP Streaming 2
Video Size 480 x 270 JPEG*
Frame Rate 10
Multicast Address 0.0.0.0
Multicast Port 0
Multicast TTL 1
Audio Transmission Disable
• RTP Streaming 3
Video Size 480 x 270 JPEG*
Frame Rate 15
Item Setting
Multicast Address 0.0.0.0
Multicast Port 0
Multicast TTL 1
Audio Transmission Disable
• RTP Streaming 4
Video Size 480 x 270 JPEG*
Frame Rate 30
Multicast Address 0.0.0.0
Multicast Port 0
Multicast TTL 1
Audio Transmission Disable
• RTP Streaming 5
Video Size H.264(1)
Frame Rate 5
Multicast Address 0.0.0.0
Multicast Port 0
Multicast TTL 1
Audio Transmission Disable
• General Upload
Upload Upload Disabled
Video Format JPEG
Frame Rate 1
Pre-event Buffer (number of
frames)
0
Post-event Buffer (number of
frames)
0
Pre-event Buffer (sec) 0
Post-event Buffer (sec) 0
• HTTP Upload
Notification Notification Only with
HTTP
URI
User Name
Proxy Server
Proxy Port 80
Proxy User Name
Parameter (query string)
• FTP Upload
Notification Video data upload with
FTP
FTP Server
* [320 x 180 JPEG] for the VB-S805D/VB-S905F.
Item Setting
170
User Name
PASV Mode Enable
File Upload Path
File Naming YYMMDDHHMMSSms
Subdirectory Name to Create
File Name to Create image.jpg
File Name to Create video.mov
Maximum Number of Loops 0
• E-mail Notification
Notification Text Only
Mail Server Name
Mail Server Port 25
Sender (From)
Recipient (To)
Authentication None
User Name
POP Server
Subject
Message Body
• Video Server
Maximum Number of Clients 30
Camera Control Queue Length 30
Maximum Connection Time
(sec.)
0
Camera Control Time (sec.) 20
• Audio Server
Audio Transmission from the
Camera
Disable
Input Volume 50
Voice Activity Detection Disable
Audio Input Line In
• HTTP Server
Authentication Method Digest Authentication
HTTP Port 80
HTTPS Port 443
• FTP Server
FTP Server Disable
• WS-Security
Check Time on Authentication Check
• Video Record Setting
Video Record Action Upload
Item Setting
• Volume Detection
Volume Detection Event Disable
Detect Criteria The reference volume
level or above
Reference Volume Level 50
Detect Criteria Duration (sec) 0
ON Event Operation Disable
OFF Event Operation Disable
Ongoing ON Event Operation Disable
Preset None
Video Record Disable
E-mail Notification Disable
External Device Output for
ON Event
Disable
External Device Output for
OFF Event
Disable
• External Device Output
Operation Mode Normally Open
Active Output Format Continuous
Pulse Output Time (sec) 1
• External Device Input
External Device Input Event Enable
Operation Mode Normally Open
Active Event Operation Disable
Inactive Event Operation Disable
Ongoing Active Event Operation Disable
Preset None
Video Record Disable
E-mail Notification Disable
External Device Output for
Active Event
Disable
External Device Output for
Inactive Event
Disable
Day/Night Mode Switching Disable
•Timer 1
Timer Event Disable
Start Time 00:00
End Time 00:00
Repeat Interval None
Video Record Disable
E-mail Notification Disable
External Device Output Disable
Day/Night Mode Switching Disable
Item Setting
List of Factory Default Settings
171
Appendix
6
•Timer 2
Timer Event Disable
Start Time 00:00
End Time 00:00
Repeat Interval None
Video Record Disable
E-mail Notification Disable
External Device Output Disable
•Timer 3
Timer Event Disable
Start Time 00:00
End Time 00:00
Repeat Interval None
Video Record Disable
E-mail Notification Disable
External Device Output Disable
•Timer 4
Timer Event Disable
Start Time 00:00
End Time 00:00
Repeat Interval None
Video Record Disable
E-mail Notification Disable
External Device Output Disable
• Administrator Password
• Authorized User Account
User List
• User Authority
Authorized User
Privileged Camera Control Checked
Camera Control Checked
Video Distribution Checked
Audio Distribution Checked
Guest user
Camera Control Checked
Video Distribution Checked
Audio Distribution Checked
• IPv4 Host Access Restrictions
Apply Host Access Restrictions Disable
Default Policy Authorize Access
Network Address / Subnet 01: / 32 Yes
Item Setting
02: / 32 Yes
03: / 32 Yes
04: / 32 Yes
05: / 32 Yes
06: / 32 Yes
07: / 32 Yes
08: / 32 Yes
09: / 32 Yes
10: / 32 Yes
11: / 32 Yes
12: / 32 Yes
13: / 32 Yes
14: / 32 Yes
15: / 32 Yes
16: / 32 Yes
17: / 32 Yes
18: / 32 Yes
19: / 32 Yes
20: / 32 Yes
• IPv6 Host Access Restrictions
Apply Host Access Restrictions Disable
Default Policy Authorize Access
Prefix / Prefix Length 01: / 128 Yes
02: / 128 Yes
03: / 128 Yes
04: / 128 Yes
05: / 128 Yes
06: / 128 Yes
07: / 128 Yes
08: / 128 Yes
09: / 128 Yes
10: / 128 Yes
11: / 128 Yes
12: / 128 Yes
13: / 128 Yes
14: / 128 Yes
15: / 128 Yes
16: / 128 Yes
17: / 128 Yes
18: / 128 Yes
19: / 128 Yes
Item Setting
172
20: / 128 Yes
•IPsec
IPsec Auto Key Exchange
• Auto Key Exchange Settings
IPsec SA Encryption Algorithm AES->3DES
IPsec SA Authentication
Algorithm
HMAC_SHA1_96
IPsec SA Validity Period (min) 480
ISAKMP SA Encryption
Algorithm
AES->3DES
ISAKMP SA Authentication
Algorithm
SHA1
DH Group Group 14->Group 5
->Group 2
ISAKMP SA Validity Period (min) 480
• IPsec Set 1
IPsec Set Disable
IPsec Mode Tunnel Mode
Destination IPv4 Address
Destination IPv6 Address
Source IPv4 Address
Source IPv6 Address
Security Protocol ESP
Security Gateway IPv4 Address
Security Gateway IPv6 Address
Destination Subnet Mask Length 16
Destination Prefix Length 16
IKE Pre-Shared Key
SA ESP Encryption Algorithm AES
SA ESP Authentication
Algorithm
HMAC_SHA1_96
SA ESP Encryption Key
(outbound)
SA ESP Authentication Key
(outbound)
SA ESP SPI (outbound)
SA ESP Encryption Key
(inbound)
SA ESP Authentication Key
(inbound)
SA ESP SPI (inbound)
SA AH Authentication Algorithm HMAC_SHA1_96
SA AH Authentication Key
(outbound)
SA AH SPI (outbound)
Item Setting
SA AH Authentication Key
(inbound)
SA AH SPI (inbound)
• IPsec Set 2
IPsec Set Disable
IPsec Mode Tunnel Mode
Destination IPv4 Address
Destination IPv6 Address
Source IPv4 Address
Source IPv6 Address
Security Protocol ESP
Security Gateway IPv4 Address
Security Gateway IPv6 Address
Destination Subnet Mask Length 16
Destination Prefix Length 16
IKE Pre-Shared Key
SA ESP Encryption Algorithm AES
SA ESP Authentication
Algorithm
HMAC_SHA1_96
SA ESP Encryption Key
(outbound)
SA ESP Authentication Key
(outbound)
SA ESP SPI (outbound)
SA ESP Encryption Key
(inbound)
SA ESP Authentication Key
(inbound)
SA ESP SPI (inbound)
SA AH Authentication Algorithm HMAC_SHA1_96
SA AH Authentication Key
(outbound)
SA AH SPI (outbound)
SA AH Authentication Key
(inbound)
SA AH SPI (inbound)
• IPsec Set 3
IPsec Set Disable
IPsec Mode Tunnel Mode
Destination IPv4 Address
Destination IPv6 Address
Source IPv4 Address
Source IPv6 Address
Security Protocol ESP
Item Setting
List of Factory Default Settings
173
Appendix
6
Security Gateway IPv4 Address
Security Gateway IPv6 Address
Destination Subnet Mask Length 16
Destination Prefix Length 16
IKE Pre-Shared Key
SA ESP Encryption Algorithm AES
SA ESP Authentication
Algorithm
HMAC_SHA1_96
SA ESP Encryption Key
(outbound)
SA ESP Authentication Key
(outbound)
SA ESP SPI (outbound)
SA ESP Encryption Key
(inbound)
SA ESP Authentication Key
(inbound)
SA ESP SPI (inbound)
SA AH Authentication Algorithm HMAC_SHA1_96
SA AH Authentication Key
(outbound)
SA AH SPI (outbound)
SA AH Authentication Key
(inbound)
SA AH SPI (inbound)
• IPsec Set 4
IPsec Set Disable
IPsec Mode Tunnel Mode
Destination IPv4 Address
Destination IPv6 Address
Source IPv4 Address
Source IPv6 Address
Security Protocol ESP
Security Gateway IPv4 Address
Security Gateway IPv6 Address
Destination Subnet Mask Length 16
Destination Prefix Length 16
IKE Pre-Shared Key
SA ESP Encryption Algorithm AES
SA ESP Authentication
Algorithm
HMAC_SHA1_96
SA ESP Encryption Key
(outbound)
SA ESP Authentication Key
(outbound)
Item Setting
SA ESP SPI (outbound)
SA ESP Encryption Key
(inbound)
SA ESP Authentication Key
(inbound)
SA ESP SPI (inbound)
SA AH Authentication Algorithm HMAC_SHA1_96
SA AH Authentication Key
(outbound)
SA AH SPI (outbound)
SA AH Authentication Key
(inbound)
SA AH SPI (inbound)
• IPsec Set 5
IPsec Set Disable
IPsec Mode Tunnel Mode
Destination IPv4 Address
Destination IPv6 Address
Source IPv4 Address
Source IPv6 Address
Security Protocol ESP
Security Gateway IPv4 Address
Security Gateway IPv6 Address
Destination Subnet Mask Length 16
Destination Prefix Length 16
IKE Pre-Shared Key
SA ESP Encryption Algorithm AES
SA ESP Authentication
Algorithm
HMAC_SHA1_96
SA ESP Encryption Key
(outbound)
SA ESP Authentication Key
(outbound)
SA ESP SPI (outbound)
SA ESP Encryption Key
(inbound)
SA ESP Authentication Key
(inbound)
SA ESP SPI (inbound)
SA AH Authentication Algorithm HMAC_SHA1_96
SA AH Authentication Key
(outbound)
SA AH SPI (outbound)
SA AH Authentication Key
(inbound)
Item Setting
174
SA AH SPI (inbound)
• Certificates
Certificate Status Not Installed
Country (C)
State/Province (ST)
Locality (L)
Organization (O)
Organizational Unit (OU)
Common Name (CN)
Validity Period Start Date
Validity Period End Date
• Encrypted Communications
HTTPS Connection Policy HTTP
• 802.1X Authentication
802.1X Authentication Disable
Authentication Status Stop
• Authentication Method
Authentication Method EAP-MD5
User Name
• Memory Card Operations
Operation Settings Save Logs and Videos
Video Format JPEG
Pre-event Buffer (number of
frames)
0
Post-event Buffer (number of
frames)
0
Pre-event Buffer (sec) 0
Post-event Buffer (sec) 0
Overwrite videos Disable
• Log Notifications
Use log notifications Disable
Notification Level Error
Mail Server Name
Mail Server Port 25
Sender (From)
Recipient (To)
Authentication None
User Name
POP Server
Subject
Item Setting
175
6
Appendix
Specifications
Camera
Image Sensor 1/4.85 type CMOS (primary color filter)
1/3 type CMOS (primary color filter)
Number of Effective
Pixels
VB-S30D/VB-S31D/VB-S800D/VB-S900F: approx. 2.1 million pixels
VB-S805D/VB-S905F: approx. 1.3 million pixels
Scanning Method Progressive
Lens 3.5x optical (4x digital zoom) zoom lens with auto focus
Fixed focal length lens (4x digital zoom)
Focal Length 2.25 mm (W) to 7.88 mm (T)*1
2.7 mm
F-number F1.4 (W) to F2.6 (T)
F1.6
Viewing Angle For 16:9 aspect ratios
Horizontal: 77.7° (W) to 20.7° (T)
Vertical: 40.4° (W) to 11.6° (T)
For 4:3 aspect ratios
Horizontal: 55.3° (W) to 15.5° (T)
Vertical: 40.4° (W) to 11.6° (T)
For 16:9 aspect ratios
Horizontal: 95.0°, Vertical: 60.0°
For 4:3 aspect ratios
Horizontal: 76.0°, Vertical: 60.0°
For 16:9 aspect ratios
Horizontal: 96.0°, Vertical: 60.5°
For 4:3 aspect ratios
Horizontal: 77.0°, Vertical: 60.5°
Day/Night Switch Auto/Day Mode/Night Mode
Min. Subject
Illumination
Day Mode
(color) 0.95 lux (F1.4, shutter speed 1/30 sec., smart shade control off, 50IRE)
0.07 lux (F1.4, shutter speed 1/2 sec., smart shade control off, 50IRE)
0.025 lux (F1.4, shutter speed 1/2 sec., smart shade control on [7], 50IRE)
0.45 lux (F1.6, shutter speed 1/30 sec., smart shade control off, 50IRE)
0.03 lux (F1.6, shutter speed 1/2 sec., smart shade control off, 50IRE)
0.01 lux (F1.6, shutter speed 1/2 sec., smart shade control on [7], 50IRE)
0.4 lux (F1.6, shutter speed 1/30 sec., smart shade control off, 50IRE)
0.03 lux (F1.6, shutter speed 1/2 sec., smart shade control off, 50IRE)
0.01 lux (F1.6, shutter speed 1/2 sec., smart shade control on [7], 50IRE)
Night Mode
(monochrome) 0.5 lux (F1.4, shutter speed 1/30 sec., smart shade control off, 50IRE)
0.04 lux (F1.4, shutter speed 1/2 sec., smart shade control off, 50IRE)
0.015 lux (F1.4, shutter speed 1/2 sec., smart shade control on [7], 50IRE)
0.25 lux (F1.6, shutter speed 1/30 sec., smart shade control off, 50IRE)
0.02 lux (F1.6, shutter speed 1/2 sec., smart shade control off, 50IRE)
0.007 lux (F1.6, shutter speed 1/2 sec., smart shade control on [7], 50IRE)
0.2 lux (F1.6, shutter speed 1/30 sec., smart shade control off, 50IRE)
0.02 lux (F1.6, shutter speed 1/2 sec., smart shade control off, 50IRE)
0.007 lux (F1.6, shutter speed 1/2 sec., smart shade control on [7], 50IRE)
Focus Auto/One-shot AF/Manual/Fixed at infinity
Shooting Distance
(from front of lens)
0.3 m (12 in.) to infinity
0.5 m (1.6 ft.) to infinity
Shutter Speed 1, 1/2, 1/4, 1/8, 1/15, 1/30, 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/10000,
1/16000 sec.
176
Exposure Auto/Auto (Flickerless)/Auto (Flickerless 2)/Auto (Shutter-priority AE)/Manual (Shutter Speed, Gain)
White Balance Auto/Light Source (Daylight Fluorescent/White Fluorescent/Warm Fluorescent/Mercury Lamp/Sodium Lamp/
Halogen Lamp)/Manual (One-shot WB/R Gain/B Gain)
Metering Mode Center-Weighted/Average/Spot
Exposure
Compensation
9 levels
Smart Shade Control Auto/Manual/Disable
Auto: 3 levels
Manual: 7 levels
– Brightens shaded areas of a video
Haze
Compensation
Auto/Manual/Disable
Auto: 3 levels
Manual: 7 levels
AGC Limit 5 levels
Pan Angle Range 350° (±175°)
Tilt Angle Range 90° (ceiling-mounted position: -90° to 0°)
– When the horizontal direction of the camera is 0°
Rotation Angle
Range
180° (±90°)
Moving Speed Pan: Max. 120°/sec., Tilt: Max. 120°/sec.
Camera
Server
Video Compression
Method
JPEG, H.264
Video Size JPEG, H.264: 1920 x 1080, 960 x 540, 480 x 270 (VB-S30D/VB-S31D/VB-S800D/VB-S900F)
1280 x 720, 640 x 360, 320 x 180
1280 x 960, 640 x 480, 320 x 240
Video Quality JPEG, H.264: 5 levels
Frame Rate*2 JPEG: 0.1 to 30 fps
H.264: 1/2/3/5/6/10/15/30 fps
Max. Frame Rate When streaming JPEG, H.264 (1920 x 1080): 30 fps
When used in the following combinations:
When streaming H.264(1) (1920 x 1080) and H.264(2) (all sizes) simultaneously: 15 fps
When streaming H.264(1) (all sizes) and H.264(2) (1920 x 1080) simultaneously: 15 fps
When streaming H.264(1) (1280 x 960) and H.264(2) (1280 x 960) simultaneously: 15 fps
When streaming H.264(1) (1280 x 720) and H.264(2) (1280 x 720) simultaneously: 15 fps
I-Frame Interval 0.5/1/1.5/2/3/4/5 sec.
Simultaneous Client
Access
Max. 30 Clients + 1 Admin Client
– H.264: Max. 10 Clients
Camera Control Administrator, Authorized user, Guest user (level of control varies depending on user)
Max. 50 user names and passwords registered for authorized users.
Access Control User authority (user name and password), Host Access Restrictions (IPv4, IPv6)
Encrypted
Communications
SSL/TLS, IPsec (Auto Key Exchange/Manual)
IEEE 802.1X EAP-MD5, EAP-TLS, EAP-TTLS, EAP-PEAP
Protocol IPv4: TCP/IP, UDP, HTTP, FTP, SNMPv1/v2c/v3 (MIB2), SMTP (Client), DHCP (Client), DNS (Client), mDNS,
ARP, ICMP, POP3, NTP, SMTP authentication, RTSP, WV-HTTP (Canon proprietary), ONVIF
IPv6: TCP/IP, UDP, HTTP, FTP, SMTP (Client), DHCPv6 (Client), DNS (Client), mDNS, ICMPv6, POP3, NTP,
SMTP authentication, RTSP, WV-HTTP (Canon proprietary), ONVIF
AutoIP Available
Specifications
177
Appendix
6
Audio Compression
Method
G.711 µ-law (64 kbps)
Audio
Communication
Method
Sound Transfer Protocol by Canon
Privacy Mask Number of registration: Max. 8 places, Number of mask colors: 1 (select from 9 colors)
View Restrictions Available
Presets Max. 64 positions
Max. 20 positions
Intelligent Functions Video:
Detection Types: moving object detection, abandoned object detection, removed object detection, camera
tampering detection, and passing detection
Detection Settings: Max. 15
Volume:
Volume Detection
Event Trigger Type External Device Input, Timer, Intelligent Function (Video), Intelligent Function (Volume)
Image Upload FTP/HTTP/SMTP (e-mail)
Temporary storage memory in camera: Max. approx. 5 MB
Frame Rate: Max. 10 fps (JPEG)
Max. 30 fps (H.264)
Event Notifications HTTP/SMTP (e-mail)
Camera Angle
Settings
Available
Image Cropping
Function
Digital PTZ
Cropping sizes: 640 x 360/512 x 288/384 x 216/256 x 144/128 x 72
640 x 480/512 x 384/384 x 288/256 x 192/128 x 96
On-Screen Display Available
Daylight Saving Time Available
Custom Settings Number of registers: 4
Items to Reg.: Pan/Tilt/Zoom, Exposure, Smart Shade Control, Haze Compensation, Focus, White
Balance, Image Quality Adjustment, Day/Night
Items to Reg.: Pan/Tilt/Zoom, Exposure, Smart Shade Control, Haze Compensation, White Balance,
Image Quality Adjustment, Day/Night
Items to Reg.: Exposure, Smart Shade Control, Haze Compensation, White Balance, Image
Quality Adjustment, Day/Night
Language German/English/Spanish/French/Italian/Russian/Turkish/Japanese
Server
Interface
Network Terminal *3LAN x 1 (RJ45, 100Base-TX (auto/full-duplex/half-duplex))
Audio Input Terminal
(common for LINE IN
& MIC IN)
φ3.5 mm (φ0.14 in.) mini-jack connector (monaural)
Switch LINE IN/MIC IN in the setting page.
LINE IN x 1 (connect to an amplifier microphone) or MIC IN x 1 (connect to a microphone without amplifier)
External Device I/O
Terminal
Input x 1, Output x 1
Memory Card microSD Memory Card, microSDHC Memory Card, microSDXC Memory Card Compatible
Frame Rate: Max. 1 fps (JPEG)
Max. 30 fps (H.264)
178
*1 (W): maximum wide angle, (T): maximum telephoto
*2 Values represent streaming performance from the camera. The frame rate may be reduced due to Viewer PC’s specs,
the number of clients accessing at the same time, network loads, video quality setting, type or movement of the subject
or other reasons.
*3 LAN cables are category 5 or higher, with length 100 m (328 ft.) or shorter.
Miscellaneous
Operating
Environment
Temperature: -10 °C to +50 °C (+14 °F to +122 °F)
Humidity: 5% to 85% (without condensation)
Power Supply PoE: PoE power supply via LAN cable (IEEE802.3af compliant)
Power Consumption Class 0 power sourcing equipment (requests 15.4 W)
Max. 7.8 W
Max. 7.6 W
Class 2 power sourcing equipment (requests 7.0 W)
Max. 4.1 W
Max. 4.3 W
Dimensions (φ x H) φ120 x 54 mm (φ4.72 x 2.13 in.)
– excluding projections
(H x W x D) 54 x 32 x 114 mm (2.13 x 1.26 x 4.49 in.)
– excluding projections
Weight Approx. 270 g (9.6 oz.)
Approx. 270 g (9.6 oz.)
Approx. 240 g (8.5 oz.)
Approx. 180 g (6.4 oz.)
179
6
Appendix
Numerics
802.1X Authentication ........................................ 69
A
Abandoned Object Detection .......................... 109
Access Control ................................................... 62
Admin Tools ....................................................... 80
Admin Tools Certificate ................................ 15, 26
Admin Viewer ........................................... 127, 139
Administrator .................................................... 125
Administrator Password ..................................... 38
AE Mode ............................................................ 44
AGC Limit ........................................................... 46
Area Zoom ....................................................... 131
Area Zoom/Drag to Move ................................. 128
Audio Distribution ....................................... 62, 124
Audio Input ......................................................... 56
Audio Multicast .................................................. 51
Audio Reception .............................................. 137
Audio Server ...................................................... 56
Audio Transmission ............................................ 56
Authentication Method ................................. 57, 69
Authorized User ......................................... 62, 125
Auto Control Settings ....................................... 143
Auto Key Exchange ........................................... 64
AutoIP ................................................................. 39
B
Back Up Settings ............................................... 75
Basic Authentication .......................................... 57
Bit Rate Control .................................................. 49
BLC (Back Light Compensation) ..................... 132
C
Camera Angle .................................................... 77
Camera Control .......................................... 62, 124
Camera Control Privilege Status Indicator ....... 129
Camera Control Privileges ....................... 124, 129
Camera Management Tool .......................... 15, 26
Camera Name .................................................... 44
Camera Position Control .................................... 47
Camera Tampering Detection .......................... 110
Certificate Information ........................................ 69
Certificate Management ............................... 67, 69
Client ............................................................ 56, 69
Color Saturation .......................................... 45, 144
Control for Admin ..................................... 121, 139
Custom Installation ............................................. 26
Custom Settings ............................................... 143
D
Date .................................................................... 42
Day Mode ......................................................... 142
Day/Night ............................................. 46, 47, 142
Day/Night Mode Switching ........................... 60, 61
Daylight Saving Time ......................................... 42
Default Gateway Address .................................. 38
Delete Videos ..................................................... 72
Detect Criteria .................................................... 58
Detection Area ................................................. 108
Detection Criteria ..................................... 107, 109
Detection Line .................................................. 109
Detection Setting .............................................. 112
Detection Type ......................................... 106, 109
Device Information ............................................. 75
Device Name ...................................................... 47
DHCP ................................................................. 38
Digest Authentication ......................................... 57
Digital PTZ .................................................. 97, 134
Digital Zoom ............................................... 46, 132
Display Options ................................................ 104
Display Screen Size ......................................... 136
DNS .................................................................... 39
Drag to Move .................................................... 131
E
Easy Installation ................................................. 26
E-mail Notification .......................... 55, 59, 60, 108
Encrypted Communications ............................... 68
Error Message .................................................. 163
Event .......................................................... 58, 108
Event Display ........................................... 112, 144
Event Logs ......................................................... 75
Exposure .......................................................... 141
Exposure Compensation ...................... 44, 77, 141
Index
180
External Device Input ..................................59, 144
External Device Name ........................................47
External Device Output ...............................59, 143
F
Factory Default Settings ............................165, 167
Filter ..........................................................115, 117
Focus ................................................................140
Focus Mode ..................................................45, 96
Format .........................................................71, 117
Frame Rate ....................................................49, 53
FTP ....................................................................148
FTP Server ...........................................................57
FTP Upload .........................................................54
Full Screen Mode ..............................................136
G
Gain ............................................................45, 141
Guest User ........................................................125
H
H.264(1) ..............................................................48
H.264(2) ..............................................................49
Haze Compensation ...................................45, 140
Haze Compensation Strength .............................47
Home Position .......................................47, 96, 132
Host Access Restrictions ..............................62, 63
HTTP Port ............................................................57
HTTP Server ........................................................57
HTTP Upload .......................................................54
HTTPS Connection Policy ...................................68
HTTPS Port ..........................................................57
I
I Frame Interval ...................................................49
Image Flip .....................................................47, 77
Image Quality Adjustment .................................144
Information Field ...............................................138
Information Message ........................................163
Initial Camera Settings ........................................44
Initial Settings ....................................................165
Input Volume .......................................................56
Installation Conditions .........................................47
Installation Guide ..................................................5
Installing the Necessary Software .......................26
Intelligent Function Setting Tool ........................101
IP Address ......................................................... 38
IPsec .................................................................. 64
IPsec Set ...................................................... 64, 65
IPv4 .................................................................... 38
IPv4 Host Access Restrictions ........................... 62
IPv6 .................................................................... 39
IPv6 Host Access Restrictions ........................... 63
J
JPEG .................................................................. 48
L
LAN .................................................................... 38
Language Button ............................................... 29
LED .................................................................... 47
Lock camera position ....................................... 105
Log Code ......................................................... 114
Log Messages ................................................. 154
Log Notifications ................................................ 75
Log Viewer ....................................................... 113
Logs ........................................................... 75, 113
M
Maintenance ...................................................... 75
Max. Frame Rate .............................................. 144
Maximum Frame Rate ........................................ 48
Maximum Packet Size ........................................ 38
mDNS ................................................................. 40
Memory Card ............................... 14, 71, 128, 148
Memory Card Capacity ...................................... 72
Memory Card Information .......................... 72, 120
Memory Card Operations ............................ 71, 72
Memory Card Recording ................................. 145
Message
Error Message ........................................... 163
Information Message ................................. 163
Log Messages ........................................... 154
Warning Message ...................................... 163
Metering Mode ........................................... 44, 141
Microphone ........................................................ 56
Modifiers .......................................................... 150
Mount ................................................................. 72
Moving Object Detection ................................. 109
N
Name Server Address ........................................ 39
Index
181
Appendix
6
Network .............................................................. 38
Network Address/Subnet ................................... 62
Night Mode ...................................................... 142
Noise Reduction ......................................... 45, 144
NTP Server ......................................................... 42
O
One-shot AF ..................................................... 140
One-shot WB .................................................... 142
On-screen Display ............................................. 49
Operating the External Device Output ............. 143
Operation Mode ................................................. 59
Operation Settings ............................................. 71
Overwrite videos ................................................ 71
P
Pan ..................................................... 93, 130, 139
Pan/Tilt Speed Control ....................................... 47
Panorama Creation Tool .................................... 87
Panorama Display .................................... 128, 129
Panorama Display Area ........................... 130, 132
Panorama Screen ........................................ 91, 95
Parameters ................................................. 54, 150
Passing Detection ............................................ 111
Password ........................................................... 29
Playback Videos .............................................. 118
PoE Supply ....................................................... 166
Post-event Buffer .......................................... 53, 71
Pre-event Buffer ........................................... 53, 71
Prefix ............................................................ 39, 63
Preset ........................................................... 59, 60
Use ............................................................ 132
Preset Setting Tool ............................................. 94
Preset Tour ......................................................... 99
Privacy Mask Setting Tool .................................. 83
Privileged Camera Control ......................... 62, 124
Privileges .......................................................... 129
Pulse .................................................................. 59
R
Reboot Item ........................................................ 74
Reconnect ........................................................ 137
Recorded Video Utility ............................. 116, 145
Recording Manually ......................................... 145
Reference Volume Level .................................... 58
Removed Object Detection .............................. 110
Reset Switch ..................................................... 165
Restore Default Settings ..................................... 75
Restore Settings ................................................. 75
RM-Lite ............................................................... 17
RTP ..................................................................... 51
RTP Streaming ................................................... 51
RTSP ................................................................... 51
S
Search Domain ................................................... 40
Self-Signed Certificate ....................................... 67
Server ................................................................. 56
Setting Menu ...................................................... 34
Setup CD-ROM .................................................... 5
Sharpness .................................................. 45, 144
Shutter Speed ............................................ 44, 141
Slow Shutter ............................................... 44, 141
Smart Shade Control .................................. 45, 140
Smart Shade Control Strength ........................... 46
Snapshot .......................................................... 137
SNMP ................................................................. 40
Specifications ................................................... 175
SSL/TLS Certificate ............................................ 67
Subnet Mask ...................................................... 38
T
Target Bit Rate ................................................... 49
Tilt ....................................................... 93, 130, 139
Time .................................................................... 42
Time Zone .......................................................... 42
Timer .......................................................... 60, 143
Troubleshooting ............................................... 152
Trusted Site ........................................................ 19
TTL ..................................................................... 51
U
Unmount ............................................................. 71
Upload ................................................................ 53
User Account ..................................................... 62
User Authentication ............................................ 29
User Authority ............................................. 62, 124
User List ............................................................. 62
User Name ......................................................... 29
User Page .......................................................... 34
182
V
VB Viewer ..................................................123, 128
Video Distribution ........................................62, 124
Video Format .........................................53, 71, 117
Video Management Information ..........................72
Video Management Information Status ...............72
Video Quality .................................................48, 49
Video Reception ................................................144
Video Record ........................................59, 60, 108
Video Record Action ...........................................58
Video Record Setting ..........................................58
Video Saving .......................................................72
Video Server ........................................................56
Video Size ...................................................48, 135
Video Size Set .....................................................48
View Restriction Setting Tool ...............................90
Viewer
Admin Viewer .............................................139
RM-Lite Viewer .............................................17
VB Viewer ...................................................128
Viewer PTZ ........................................................132
Voice Activity Detection ......................................56
Volume Detection ........................................58, 145
W
Warning Message .............................................163
White Balance .............................................45, 142
WS-Security .........................................................57
Z
Zoom ...................................................77, 131, 139
BIE-7020-003 © CANON INC. 2018