Table of Contents
D-Link DCS-5030L User Manual
Displayed below is the user manual for DCS-5030L by D-Link which is a product in the Security Cameras category. This manual has pages.
User Manual
HD Pan & Tilt Wi-Fi Day/Night Camera
DCS-5030L
Version 1.01 | 03/23/2017
2D-Link DCS-5030L User Manual
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any
person or organization of such revisions or changes. Information in this document may become obsolete as our services and
websites develop and change. Please refer to the www.mydlink.com website for the most current information.
Manual Revision
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United
States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of
their respective companies.
Apple®, Apple logo®, Safari®, iPhone®, iPad®, iPod touch® and Macintosh® are trademarks of Apple Inc., registered in the U.S. and
other countries. App StoreSM is a service mark of Apple Inc. Chrome™ browser, Google Play™ and Android™ are trademarks of
Google Inc. Internet Explorer®, Windows® and the Windows logo are trademarks of the Microsoft group of companies.
Copyright © 2017 by D-Link Corporation, Inc. All rights reserved. This publication may not be reproduced, in whole or in part,
without prior expressed written permission from D-Link Corporation, Inc.
ErP Power Usage
This device is an Energy Related Product (ErP) designed to be always on. If it is not needed during certain periods of time, it
can be unplugged to save energy.
Revision Date Description
1.00 15 December, 2015 Initial A1 release
1.01 23 March, 2017 Removed Setup Wizard
Manual Overview
3D-Link DCS-5030L User Manual
Table of Contents
Table of Contents
Product Overview ..............................................................5
Package Contents .........................................................................5
System Requirements ................................................................. 6
Introduction ...................................................................................7
Features ............................................................................................8
Hardware Overview ...................................................................10
Front View ..............................................................................10
Rear View ...............................................................................11
Installation .......................................................................12
Mobile App Setup ......................................................................13
mydlink Lite ..................................................................................14
Zero Conguration Setup ........................................................15
Manual Hardware Installation ................................................ 18
Wireless Installation Considerations ....................................19
WPS - Push Button Setup ......................................................... 20
Mounting the Camera...............................................................21
mydlink ...........................................................................................23
Conguration ...................................................................24
Using the Web Conguration Interface .............................. 24
Live Video ......................................................................................25
Setup ...............................................................................................27
Wizard .....................................................................................27
Internet Connection Setup Wizard ........................28
Network Setup ..................................................................... 30
Wireless Setup ......................................................................32
Extender Setup ....................................................................33
Dynamic DNS (DDNS) .......................................................35
Image Setup .........................................................................36
Video .......................................................................................37
Audio .......................................................................................38
Motion Detection ...............................................................39
Sound Detection ................................................................. 40
Mail ..........................................................................................41
FTP ............................................................................................44
Time and Date ...................................................................... 46
Day/Night Mode .................................................................47
Camera Control ...................................................................48
SD Recording ........................................................................50
SD Management .................................................................52
Maintenance ................................................................................53
Admin .....................................................................................53
System ....................................................................................55
Firmware Upgrade ..............................................................56
Status ..............................................................................................57
Device Info ............................................................................57
Active User ............................................................................58
Help .........................................................................................59
Troubleshooting ..............................................................60
5D-Link DCS-5030L User Manual
Section 1 - Product Overview
Package Contents
If any of the above items are missing, please contact your reseller.
Note: Using a power supply with a dierent voltage than the one included with your product will cause damage and void the warranty
for this product.
DCS-5030L HD Pan & Tilt Wi-Fi Day/Night Camera
CAT5 Ethernet Cable Quick Install Card
Micro-USB Power Adapter
Camera Base and Mounting Kit Quick Install Guide
6D-Link DCS-5030L User Manual
Section 1 - Product Overview
System Requirements
Network Requirements
• 10/100 Ethernet network or a 802.11n/g wireless network
• An Internet connection
• A router connected to your broadband modem
Web-based Conguration Utility
Requirements
Browser Requirements:
• Internet Explorer 8 or higher
• Firefox 12 or higher
• Safari 6 or higher
Note: Make sure you have the latest version of Java installed.
Visit www.java.com to download the latest version.
mydlink Website Requirements
• Broadband Internet connection
Computer with:
• Internet Explorer 8 or higher (ActiveX)
• Firefox 12 or higher
• Safari 6 or higher
• Chrome 20 or higher
7D-Link DCS-5030L User Manual
Section 1 - Product Overview
Introduction
Congratulations on your purchase of the DCS-5030L HD Pan & Tilt Wi-Fi Day/Night Camera. The DCS-5030L is a versatile and
unique solution for your home or small oce. Unlike a standard webcam, the DCS-5030L is a complete system with a built-in
CPU, web server, and wireless networking device that transmits high-quality video images for security and surveillance. The
pan/tilt function allows the camera to patrol a wide area, while the built-in IR LEDs provide around-the-clock surveillance
regardless of the lighting conditions.
The DCS-5030L can be accessed remotely, and controlled from any PC/laptop over your local network or through the Internet
via a web browser. The simple installation and intuitive web-based interface oer easy integration with your Ethernet/Fast
Ethernet or 802.11 n/g wireless network, with Wireless N technology you have the freedom to place the DCS-5030L anywhere
within range of your existing wireless network. The DCS-5030L also comes with remote monitoring and motion detection
features for a customizable, cost-eective security solution.
Your DCS-5030L is mydlink-enabled, which means that you can view and manage your camera over the Internet through the
mydlink website, or through the mydlink mobile app for iOS and Android. You can view your live video feed, take snapshots,
and manage the camera’s conguration, all from anywhere you have Internet access.
8D-Link DCS-5030L User Manual
Section 1 - Product Overview
Easy to Use and mydlink-Enabled for Easy Access and Management
The DCS-5030L is a standalone surveillance camera that requires no special hardware or software, and can operate independently,
even without a PC. This camera is also mydlink-enabled, which means you can view and manage your camera through the mydlink
website, or through the mydlink mobile app for iOS and Android mobile devices.
Pan/Tilt for Wide Viewing Area
Patrol a large area with one camera thanks to the DCS-5030L’s pan and tilt functions. You can use the web interface to manually adjust
the camera lens position, or set up to 24 pre-dened preset positions, enabling you to quickly move to frequently viewed points of
interest.
IR LEDs for Day and Night Functionality
The built-in infrared LEDs enable night time viewing of up to 8 meters (26 feet), giving you clear images regardless of lighting condi-
tions.
H.264 Codec for Smooth, Space-Ecient Video
This camera supports use of the H.264 video codec, which gives you high-quality video with reduced bandwidth requirements. This
means that you can enjoy smoother, more reliable video streaming over the Internet, and less disk space is required to save record-
ings.
Motion and Sound Triggered Notications and Recordings
The DCS-5030L can send e-mail notications with snapshots or video clips whenever motion or sound is detected. You can customize
areas of the video to monitor for motion to keep watch over specic areas of interest, and you can set volume thresholds to determine
the sound level required to trigger a sound notication.
Features
9D-Link DCS-5030L User Manual
Section 1 - Product Overview
802.11n/g/b Wireless or Ethernet/Fast Ethernet Support
The DCS-5030L oers wireless 802.11n/g/b and Ethernet/Fast Ethernet connectivity, making it easy to integrate into your existing net-
work environment. The DCS-5030L works with either a 10 Mbps Ethernet-based network or 100 Mbps Fast Ethernet-based network
for traditional wired environments, and works with 802.11n/g/b wireless routers or access points for added exibility. The Site Survey
feature also allows you to view and connect to any available wireless networks within range of the camera.
Micro-USB Powered for Convenience
For added convenience, the DCS-5030L can be powered via any Micro-USB cable, so you don’t have to worry about looking
for a matching power adapter when setting it up for use. Simply use the included or standard Micro-USB cable and plug it into
any USB power adapter or powered USB port and it’ll be powered on and ready for use.
Remote Monitoring with mydlink Lite App
With the mydlink Lite app for mobile devices, you can easily view live streams and manage your camera from anywhere with an In-
ternet connection.
10D-Link DCS-5030L User Manual
Section 1 - Product Overview
Hardware Overview
Front View
1 Light Sensor The IR-Cut Removable sensor monitors lighting conditions and switches between
color and infrared accordingly.
2 Camera Lens Records video of the surrounding area.
3 Manual Focus Bezel Manually adjust the focus of the lens for your required view.
4 WPS LED Indicates the WPS connection status of the camera.
5 Microphone Records audio from the surrounding area.
6 Infrared LEDs Illuminate the camera’s eld of view in low light environments..
7Power and Link LED Indicates the camera’s current status.
4
5
1
2
3
6
7
11D-Link DCS-5030L User Manual
Section 1 - Product Overview
Rear View
1 2 3
4
1 WPS Button Press this button, then press the WPS button for 5 seconds on your router to set up
a wireless connection automatically.
2 Ethernet Port RJ45 connector for Ethernet.
3 Reset Button Press and hold this button for 10 seconds to reset the camera.
4 Micro-USB Port Connect a Micro-USB cable here to power on the camera.
5 microSD Port Insert a microSD card to record to the card.
5
12D-Link DCS-5030L User Manual
Section 2 - Installation
There are three ways to set up your camera:
• Mobile App Setup: You can set up your DCS-5030L with the free mydlink Lite app. Refer to Mobile App Setup
on page 13.
• Zero Conguration Setup: If you have a mydlink-enabled router (D-Link cloud router), this is the easiest way
to set up your camera. Refer to Zero Conguration Setup on page 15.
• Manual Hardware Installation: This section shows you how to manually set up your camera, however in order
to use the mydlink features of your camera, you will still need to run the mydlink Lite app. Refer to Manual
Hardware Installation on page 18.
Installation
13D-Link DCS-5030L User Manual
Section 2 - Installation
Mobile App Setup
The mydlink Lite app allows you to congure your camera without a PC, and lets your camera work together with other
mydlink Lite compatible devices. Search for the free mydlink Lite app on the App Store or Google Play and download it to
your smartphone or tablet. You can also use a QR code reading app to scan the corresponding code for your device below.
14D-Link DCS-5030L User Manual
Section 2 - Installation
mydlink Lite
1. Using your mobile, connect to the same wireless network as your camera.
2. Download the mydlink Lite app using a QR code in the previous page.
3. On the login page, tap Local. The app will automatically discover any D-Link
cameras in your network.
4. Tap the DCS-5030L icon to begin setup.
5. Enter your camera’s administrator password (it will be on your Quick Install
Card if you haven’t congured it). Tick the Remember Me box and tap OK.
You will be taken to the Live View page of your camera.
You can monitor your camera using the mydlink Lite app either from your local network (same as the camera’s) or remotely
from anywhere with an Internet connection. To use either method, follow the steps below:
1. To enable remote monitoring, you will need to use mydlink services. Start the
mydlink Lite app on your mobile device.
2. If you already have an account, you can tap Sign In. If you don’t have a myd-
link account and want to register for one, you can tap the New users, sign
up here. link to start the registration process.
To view your camera feed remotely:
To view your camera feed on a local network:
mydlink Lite
15D-Link DCS-5030L User Manual
Section 2 - Installation
If you have a mydlink-enabled Cloud Router, you can take advantage of Zero Conguration Setup. Zero Conguration
automatically congures your camera's settings such as Wi-Fi name/password for you, and adds the camera to your mydlink
account automatically. This type of setup allows you to set up your camera by simply plugging it in and connecting it to your
router.
Connect your camera to your mydlink-enabled Cloud Router and Zero Conguration will automatically congure your DCS-5030L
and add the camera to your mydlink account. After a short period of time, you will be able to remotely access your camera
from the website http://www.mydlink.com to manage and monitor your DCS-5030L.
Zero Conguration Setup
Connect the Ethernet Cable and the Micro-USB Plug
Use the included Ethernet cable and plug it into the camera. Plug the other
end into an available port on your D-link Cloud Router. If you wish to use
your camera wirelessly, you will be able to remove the cable after Zero
Conguration Setup is complete. Plug one end of the included Micro-USB
power adapter to the back of the camera.
Plug the Micro-USB Power Adapter to a Wall Outlet
Plug the other end of the Micro-USB power adapter to a wall outlet to power
on your camera.
16D-Link DCS-5030L User Manual
Section 2 - Installation
A summary and conrmation notication will appear with the automatically
congured details. Make a note of the details and click Yes to add the camera
to your account.
Check Your mydlink Account
From any computer with an Internet connection, open a web browser and
login to your mydlink account. The mydlink page will check for new devices
and display a New device Found! pop-up notication in the bottom-left
corner. Click the notication to continue.
DCS-5030L
DCS-5030L
17D-Link DCS-5030L User Manual
Section 2 - Installation
During the Zero Conguration process, you will be directed to the mydlink Live
View tab for your camera where you will see a screen similar to the following.
If you wish to connect your camera to your router wirelessly, you can simply
disconnect the Ethernet cable and move the camera to its intended location;
your router's wireless settings have been automatically transferred to the
camera, and no further conguration is required.
Your camera is now set up, and you can skip to mydlink on page 23 to
learn more about the mydlink features of this camera, or to Conguration
on page 24 for advanced conguration of your camera.
Note: If the live image is blurry or out of focus, you can manually adjust the
focus by rotating the manual focus bezel surrounding the camera lens.
18D-Link DCS-5030L User Manual
Section 2 - Installation
Manual Hardware Installation
To set up your camera manually, we suggest using WPS. You can also go to the web conguration page to set up your camera.
Note: In order to use the mydlink features of this product, you will need to go through the mydlink Lite or Zero Conguration Setup.
Optional: Use WPS to Connect Wirelessly
You can use WPS to connect your camera to your network wirelessly. For more
information, refer to WPS - Push Button Setup on page 20. If your router
does not support WPS, you will still be able to set up your camera’s wireless
settings in the camera’s web interface.
Connect the Ethernet Cable and the Micro-USB Plug
Use the included Ethernet cable and plug it into the camera. Plug the other
end into an available LAN port on your router. Plug one end of the included
Micro-USB power adapter to the back of the camera.
Congure Your Camera
Refer to Conguration on page 24 for information on how to congure
your camera.
Plug the Micro-USB Power Adapter to a Wall Outlet
Plug the other end of the Micro-USB power adapter to a wall outlet to power
on your camera.
19D-Link DCS-5030L User Manual
Section 2 - Installation
Wireless Installation Considerations
Your D-Link Wireless Network Camera lets you access your network using a wireless connection from anywhere within the
operating range of your wireless network. However, the number, thickness and location of walls, ceilings, or other objects
that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and
background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic
guidelines:
1. Minimize the number of walls and ceilings between your adapter and other network devices (such as your
Network Camera) - each wall or ceiling can reduce your adapter’s range by 1-30 meters (3-90 feet).
2. Be aware of the direct line between network devices. A wall that is half a meter thick (1.5 feet), at a 45-degree
angle appears to be almost 1 meter (3 feet) thick. At a 2-degree angle, it can appear over 14 meters (42 feet)
thick. Position your devices so that the signal will travel straight through a wall or ceiling (instead of at an angle)
for better reception.
3. Building materials make a dierence. A solid metal door or aluminum studs may weaken the wireless signal. Try
to position your access points, wireless routers, and other networking devices where the signal passes through
drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh
tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product at least or 1-2 meters (3-6 feet ) away from electrical devices or appliances that generate RF
noise.
5. If you are using 2.4 GHz cordless phones or other radio frequency sources (such as microwave ovens), your
wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as
far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.
20D-Link DCS-5030L User Manual
Section 2 - Installation
To create a WPS connection:
Step 1
Make sure the camera is plugged in, then press and hold the WPS button for
ten seconds. The blue WPS status LED will start blinking.
Step 2
Press the WPS button on your router within 60 seconds. The WPS button is
usually on the front or side of your router. On some routers, you may need
to log in to the web interface and click on an on-screen button to activate
the WPS feature. If you are not sure where the WPS button is on your router,
please refer to your router’s User Manual.
The DCS-5030L will automatically create a secure wireless connection to your
router. While connecting, the blue LED will ash and your camera will reboot.
Note: You can also set up a wireless connection manually; please see Wireless
Setup on page 32.
WPS - Push Button Setup
WPS Button
If your router supports Wi-Fi Protected Setup (WPS), you can create a secure wireless connection using the WPS Button on the
back of the camera. Please note that WPS setup only establishes a secure wireless connection, and you will still need to use
manual installation to congure your camera.
21D-Link DCS-5030L User Manual
Section 2 - Installation
Mounting the Camera
To mount your camera on a wall or ceiling, please follow the steps below.
Use appropriate tools to drill two holes the same diameter as the plastic anchors.
After drilling the holes, insert the plastic anchors to support the screws.
If desired, the power and Ethernet cables can be concealed behind the
mounting bracket. Run the cables through the back of the mounting bracket,
securing them with the built-in guides. Be sure to leave enough cable length
protruding from the top to allow connection to the camera.
Place the mounting bracket where you want to position the camera and use a
pencil to mark the holes.
It is suggested that you congure the camera before mounting.
2
3
1
22D-Link DCS-5030L User Manual
Section 2 - Installation
5
6
Using the supplied thumbscrew, fasten the camera to the mounting bracket.
Connect the power and Ethernet cables to the camera.
Adjust the angle of the arm on the mounting bracket as required. Tighten the
thumbscrew to lock the arm in place.
4
Fasten the mounting bracket to the wall using the screws provided.
Do not overtighten the screws as this may crack the mounting bracket.
23D-Link DCS-5030L User Manual
Section 2 - Installation
mydlink
After registering your DCS-5030L camera with a mydlink account in the mydlink Lite app, you will be able to remotely access
your camera from the www.mydlink.com website. After signing in to your mydlink account, you will see a screen similar to
the following:
24D-Link DCS-5030L User Manual 24
Section 3 - Conguration
Conguration
Using the Web Conguration Interface
After completing setup through the mydlink Lite mobile app or Zero Conguration Setup, you are ready to use your camera.
The camera’s built-in web conguration interface is designed to allow you to easily access and congure your DCS-5030L. There
are two ways in which you can access your camera’s web conguration interface:
• Log in to your mydlink account to access your camera’s conguration interface.
• You can also access the interface locally by entering the IP address of your camera into a web browser, such as Internet
Explorer®. To log in, use the User name admin and the password you created in the Installation Wizard. If you did not create
a password, leave the password eld blank. After entering your password, click OK.
Note: If you are directly connecting your camera to your PC, or if you are using the camera on a closed network, the default IP
is 192.168.0.20. If the camera is connected to a router or network, a dierent IP address may have been assigned.
DCS-5030L
25D-Link DCS-5030L User Manual 25
Section 3 - Conguration
Live Video
Video
Compression
Format:
Pan/Tilt
Wheel:
Go To:
Pan Step:
Tilt Step:
Language:
Zoom:
Audio:
Night Mode:
Click the H.264 or MJPEG radio button to choose which stream
to view.
Click on the directional arrows on the pan/tilt wheel to manually
control the pan and tilt functions of the camera. At any time, you
can click the home button in the center of the wheel to return
the camera to its home position.
Select one of the preset locations from the drop-down menu
to move the camera to that position. Preset positions can be
set by going to the Camera Control section of the Setup menu.
Select the increment of movement for each press of a pan (up/
down)arrow on the pan/tilt wheel.
Select the increment of movement for each press of a tilt (left/
right) arrow on the pan/tilt wheel.
You can select the desired language for the web interface from
this drop-down menu.
Click on these buttons to adjust the level of digital zoom applied
to the image
Click on these buttons to turn audio playback on and o.
If you have set the night mode to manual, the night mode
feature can be toggled using these buttons.
Note: If the live image is blurry or out of focus, you can manually
adjust the focus by rotating the manual focus bezel surrounding
the camera lens.
The Live Video screen shows you the live video feed from your camera. For information on how to congure your Live Video
streams, refer to Video on page 37.
26D-Link DCS-5030L User Manual 26
Section 3 - Conguration
Note: If the live image is blurry or out of focus, you can manually
adjust the focus by rotating the manual focus bezel surrounding
the camera lens.
27D-Link DCS-5030L User Manual 27
Section 3 - Conguration
Setup
Wizard
You may choose to congure your Internet connection by using the Internet
Connection Setup Wizard that includes step-by-step instructions. Otherwise,
you may manually congure your connection using the Manual Internet
Connection Setup.
28D-Link DCS-5030L User Manual 28
Section 3 - Conguration
Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to congure your
new D-Link Camera and connect the camera to the Internet.
Click Next to continue.
Select what kind of Internet connection your camera should use:
• DHCP Connection (Default): If you are connected to a router, or
are not sure which connection to use, select DHCP Connection.
• Static IP Address: This will allow you to manually enter your
network settings for the camera. Select this option if your Internet
Service Provider or network administrator has provided you with
a set of predened IP addresses. If you are not sure what settings
to enter, check with your Internet Service Provider or network
administrator.
• PPPoE Connection: If your camera is directly connected to a
DSL modem, you may need to use PPPoE. Enter the username
and password provided to you by your Internet Service Provider.
Click Next to continue.
29D-Link DCS-5030L User Manual 29
Section 3 - Conguration
Enter a name for your camera. Click Next to continue.
Congure the correct time to ensure that all events are triggered, captured,
and scheduled at the right time. Click Next to continue.
This page displays your congured settings. Click Apply to save and activate
your changes, or click Back to change your settings.
If you have a Dynamic DNS account and would like the camera to update
your IP address automatically, select Enable and enter your host information.
Otherwise, simply select Disable.
Click Next to continue.
DCS-5030L
DCS-5030L
30D-Link DCS-5030L User Manual 30
Section 3 - Conguration
Network Setup
Select this connection if you have a DHCP server running on your
network and would like a dynamic IP address to be assigned to
your camera automatically.
Select this connection type if your Internet Service Provider (ISP)
or network administrator has provided you with a static or xed
IP address and other network information for your camera. Click
on the Static IP Address radio button to activate this method.
IP Address: The xed IP address
Subnet Mask: The default value is “255.255.255.0.” Used to
determine if the destination is the same subnet.
Default Gateway: The gateway used to forward data to
destinations in a dierent subnet. Invalid gateway settings may
cause the failure of transmissions to a dierent subnet.
Primary DNS: Primary domain name server that translates
names to IP addresses.
Secondary DNS: Secondary domain name server to backup
the Primary DNS.
If you need to connect to the Internet using a PPoE connection,
click on the PPPoE radio button and enter the username and
password provided to you by your Internet Service Provider or
Network Administrator.
You may congure a second HTTP port that will allow you
to connect to the camera via a standard web browser. The
port can be set to a number other than the default TCP
port of 80. A corresponding port must be opened on the
router. For example, if the port is changed to 1010, users
must type http://192.168.0.100:1010 instead of only
“http://192.168.0.100”.
Enable this setting to congure your camera as a UPnP device
in the network. You can also enable UPnP port forwarding.
DHCP:
Static IP
Client:
PPPoE:
Port Settings:
UPnP
Settings:
This section allows you to congure your network settings.
31D-Link DCS-5030L User Manual 31
Section 3 - Conguration
Enable this setting to allow your camera to be discovered by
the Bonjour service. You can also specify a Bonjour name for
the device.
Bonjour
Settings:
32D-Link DCS-5030L User Manual 32
Section 3 - Conguration
Wireless Setup
Check this box to allow your camera to connect to your network
wirelessly.
Enter the network name (SSID) of the wireless network you want
to connect to. You can also click the Site Survey button below
to choose an available network and ll in settings automatically.
If you are using Ad-Hoc as your connection mode, select the
same channel that is being used by your wireless network.
Select the connection mode used by your wireless network. In
most cases, you should select Infrastructure. Ad-Hoc is only
used if your camera is directly connecting to another PC or
device without the use of a router or access point.
Clicking this button will allow you to select an available wireless
network to connect to, and will ll in the necessary settings for
you.
Select the wireless security mode used by your wireless network.
If you select WEP or WPA-PSK/WPA2-PSK, enter the password
for your wireless network in the text box that appears.
Enable
Wireless:
SSID:
Channel:
Connection
Mode:
Site Survey:
Wireless
Security
Mode:
This section allows you to set up and congure the wireless settings on your camera.
33D-Link DCS-5030L User Manual 33
Section 3 - Conguration
Extender Setup
Check this box to enable Extender Mode.
This shows the name of the Host wireless network that the
camera is connected to and will extend.
Select an option:
• Same as Host Wireless Network Name: Your extended
network will use the same name and settings as your
Host network. Your devices can use the same wireless
information to connect to both the Host and Extended
networks.
• Create a New Wireless Network Name: This allows
you to manually set the name and security used for the
extended network. You will need to add this information
for each wireless device that connects to this Extended
network.
Set the maximum number of clients that are allowed to connect
to the extended network.
If you choose to Create a New Wireless Network Name, you
can set your wireless security options here.
• None - No wireless encryption will be enabled. All data
sent over the wireless connection could be viewed by
third parties.
• WEP - WEP is the simplest form of wireless encryption,
and should only be used if you devices do not support
WPA/WPA2 encryption.
• WPA/WPA2 - This is currently the most advanced
Enable
Extender
Mode:
Host Wireless
Network
Name:
Extended
Wireless
Network
Name (SSID):
Maximum
Clients
Allowed to
Connect:
Security
Mode:
This section allows you to setup and congure the Extender Mode feature of your camera. Extender Mode allows your camera
to extend the range of your existing wireless network by repeating the signal it receives. You can choose to use the same
network name and settings as your existing wireless network, or you can create a new one.
34D-Link DCS-5030L User Manual 34
Section 3 - Conguration
encryption method. Enter a Pre-shared Key (PSK/
password) in the text box provided. Wireless clients will
require this password in order to access your extended
network.
35D-Link DCS-5030L User Manual 35
Section 3 - Conguration
Click to enable the DDNS function.
Select your Dynamic DNS Server from the pull down menu.
Enter the host name of the DDNS server.
Enter your username or e-mail used to connect to the DDNS.
Enter your password used to connect to the DDNS server.
This allows you to specify the periodic update time for the DDNS
address.
Enable:
Server
Address:
Host Name:
User Name:
Password:
Timeout:
Dynamic DNS (DDNS)
This section allows you to congure the DDNS setting for your camera. DDNS will allow all users to access your camera using
a domain name instead of an IP address.
36D-Link DCS-5030L User Manual 36
Section 3 - Conguration
Image Setup
If you have lights ickering in your camera video, try enabling
antiicker. Otherwise, you should leave this disabled.
Select this box to vertically ip the video.
Horizontally ip the video.
Note: If the camera is installed upside down, Flip Image and
Mirror should both be checked
Allows you to adjust the brightness level. Select a setting
between -5 and +5.
Allows you to adjust the contrast level. Select a setting between
-5 and +5.
Allows you to adjust the saturation level. Select a setting
between -5 and +5.
Enable
Antiicker:
Flip Image:
Mirror:
Brightness
Control:
Contrast
Control:
Saturation
Control:
This section allows you to congure the image settings for your camera.
37D-Link DCS-5030L User Manual 37
Section 3 - Conguration
Video
Video Prole:
Encode Type:
Resolution:
Bit Rate
Frame Rate:
JPEG Quality:
Default View
Mode:
Light
Frequency:
This section allows you to congure the video settings for your camera.
This section allows you to change the Resolution, FPS, and
Quality.
Your camera has separate settings for the H.264 and MJPEG
video streams.
Select the desired video resolution from three formats: 1280 x
720, 640 x 480, , and 320 x 240. Higher settings oer better
quality, but will require more bandwidth to stream.
Select the desired bit rate for the video. A higher bit rate will
increase image quality, but will require more bandwidth to
stream.
Select the frame rate (FPS) to use for the video stream. Higher
settings oer better quality, but will require more bandwidth
to stream.
Select one of ve levels of image quality: Very High, High,
Medium, Low, and Very Low.
Select the default encoding to use when viewing your video
on the Live Video page.
Select the frequency used by your lighting and power to help
reduce image icker.
38D-Link DCS-5030L User Manual 38
Section 3 - Conguration
Audio
This section allows you to adjust the audio settings for your camera.
Note: Please wait a few seconds for the camera to adjust the audio after making changes.
Audio
Settings:
Volume
Settings:
You may Enable or Disable the camera audio feed.
Select the desired volume percentage level.
39D-Link DCS-5030L User Manual 39
Section 3 - Conguration
Motion Detection
Motion detection allows you to mark areas of your camera’s video to monitor for motion, which can be used to trigger snapshots
or recordings. Refer to Mail on page 41 and FTP on page 44 for more details.
Motion
Detection:
Time:
Sensitivity:
Detection
Areas:
Select whether you want to enable or disable the motion
detection feature of your camera.
Specify whether you want to Always have motion detection
enabled, or according to a Schedule that you dene.
Specify the amount of dierence required to determine whether
there was motion.
Use your mouse to click on the areas of the video that you would
like to monitor for motion.
40D-Link DCS-5030L User Manual 40
Section 3 - Conguration
Sound Detection
Sound detection allows you to detect when there is a loud sound in the area, which can be used to trigger snapshots or
recordings. Refer to Mail on page 41 and FTP on page 44 for more details.
Sound
Detection:
Time:
Detection
Level:
Select whether you want to enable or disable the sound
detection feature of your camera.
Specify whether you want to Always have motion detection
enabled, or according to a Schedule that you dene.
Specify the volume level that a sound must exceed in order to
trigger the sound detection feature. The graph at the bottom
of the page will show the current volume levels being detected
by the camera.
41D-Link DCS-5030L User Manual 41
Section 3 - Conguration
Mail
SMTP Server
Address:
SMTP Server
Port:
Sender e-mail
Address:
Receiver
e-mail
Address:
User Name:
Password:
This is the domain name or IP address of your external e-mail
server.
This allows you to set the port for the SMTP Server. The default
value is 25, and should only be changed if advised by your
e-mail provider.
This is the e-mail address listed as the sender for your notication
e-mails.
This is the e-mail address that your notication e-mails will be
sent to.
If the SMTP server uses authentication, enter your user name.
If the SMTP server uses authentication, enter your password.
For example, if you want to use Gmail with SSL-TLS for e-mail
notications, you can follow the setup procedure as below:
Step 1 - Enter “smtp.gmail.com” in SMTP Server Address.
Step 2 - Change the SMTP server port number from 25 to
465.
Step 3 - Enter your gmail e-mail address in Sender E-mail
Address.
Step 4 - Enter the destination e-mail address in Receiver
E-mail Address.
Step 5 - Enter the user name required to access the SMTP
server.
Step 6 - Enter the password required to access the SMTP
server.
Step 7 - Select SSL-TLS and then click Save Settings.
Step 8 - Click the Test button to send a test e-mail to the
account listed above.
This section allows you to congure your camera to send snapshots and video clips to an e-mail address. If you are not sure
what settings to use, check with your e-mail service provider.
42D-Link DCS-5030L User Manual 42
Section 3 - Conguration
Enable the
e-mailing
of images
to an e-mail
account:
E-mail
Interval:
Enabling this will allow snapshots to be e-mailed to you in
dierent ways:
• Choosing Always will e-mail snapshots continuously
based on the E-mail Interval specified.
• Choosing Schedule will allow you to schedule when to
start and stop the e-mailing of snapshots.
• Select Motion/Sound Detection if you would like the
camera to e-mail images only when motion or sound is
detected. You can choose whether to e-mail a snapshot
immediately, or e-mail 6 snapshots together, with 3
frames before and after motion/sound was detected. You
can also set the Frame interval time to specify how far
apart the snapshots should be.
This sets the limit for how frequently e-mail notications will
be sent. This can be set from 1 to 65535 seconds.
Note: You can also use STARTTLS, which will use SMTP server
port number 587.
Note: If you want to use a Yahoo SMTP server, the SMTP server
address will be dierent between each registered region, and
only SMTP port 465 is supported for SSL-TLS.
43D-Link DCS-5030L User Manual 43
Section 3 - Conguration
Enable the
e-mailing of
video clips
to an e-mail
account:
Test E-mail
Account:
Enabling this will allow video clips to be e-mailed to you in
dierent ways. This is the same as e-mailing images, as specied
above, but will take video clips according to the Video Limit
settings you specify.
This will send a test e-mail according to the e-mail settings you
have specied above.
44D-Link DCS-5030L User Manual 44
Section 3 - Conguration
FTP
This section allows you to congure your camera to send snapshots and video clips to an FTP server.
Host Name:
Port:
User Name:
Password:
Path:
Passive Mode:
Enable the
uploading of
images to an
FTP server:
Image
Frequency:
Enter the IP address of the FTP server that you will be connecting
to.
Enter the port of the FTP server that you will be connecting to.
Enter the user name of your FTP server account.
Enter the password of your FTP server account.
Enter the destination path/folder to save les to on the FTP
server.
Enabling passive mode may help you reach your FTP server if
your camera is behind a router protected by a rewall.
Enabling this will allow snapshots to be uploaded in dierent
ways:
• Choosing Always will upload snapshots continuously
based on the Image Frequency specified.
• Choosing Schedule will allow you to schedule when to
start and stop the uploading of snapshots.
• Select Motion/Sound Detection if you would like the
camera to upload images only when motion is detected.
Set how frequently you want images to be taken and uploaded.
You can choose to upload by frames per second, or by seconds
per frame.
45D-Link DCS-5030L User Manual 45
Section 3 - Conguration
Base File
Name:
File:
Test FTP
Server:
Enable the
uploading of
video clips to
an FTP server:
File Name
Prex:
Video Limit:
Test FTP
Server:
Set the desired base le name for your snapshots.
Select how you want uploading of snapshots to be handled:
• Overwrite will replace the old snapshot with the new
one. This means you will only have one snapshot that is
updated every time a new one is taken.
• Date/Time Suffix will add the date and time to the end
of the snapshot file name. You can also choose to make
subfolders based on a period of time you specify to help
you organize your snapshots.
• Sequence Number Suffix will add a number to the end
of the snapshot file name up to the number you specify,
after which the oldest files will be overwritten.
Clicking on the Test button will send a test JPEG snapshot to
the FTP server specied above to make sure that your settings
are correct.
Enabling this will allow video clips to be uploaded to your FTP
server in various ways.
• Choosing Always will upload video continuously, based
on the Video Limit specified below.
• Choosing Schedule will allow you to schedule when to
start and stop the uploading of video.
• Select Motion/Sound Detection if you would like the
camera to upload video only when motion or sound is
detected.
Set the desired base le name for your videos.
Specify the maximum le size and duration of the videos to be
uploaded.
Clicking on the Test button will send a test JPEG snapshot to
the FTP server specied above to make sure that your settings
are correct.
46D-Link DCS-5030L User Manual 46
Section 3 - Conguration
Time and Date
Time Zone:
Synchronize
NTP Server:
Set the Date
and Time
Manually:
Select the time zone for your region from the drop-down menu.
Enabling this will allow the camera to update its clock
automatically from an NTP server. Select the NTP server closest
to you, and select whether you want to apply daylight saving
corrections.
If Synchronize NTP Server is disabled, you can set the date and
time manually. You can also click on the Copy Your Computer’s
Time Settings to automatically set the date and time based on
your computer’s settings.
This section allows you to congure the settings of the internal system clocks for your camera.
47D-Link DCS-5030L User Manual 47
Section 3 - Conguration
Day/Night Mode
This section allows you to congure when Day and Night modes are used. Day mode uses the infrared cut lter to provide a
corrected color image for times where there is available lighting. Night mode moves the lter out of the way to use all available
light, and turns on the IR LED illuminators to allow for clear black and white video in dark areas with little or no light.
Auto:
Manual:
Always Day
Mode:
Always Night
Mode:
Day Mode
Schedule:
This mode will automatically switch between Day and Night
mode based on the amount of available lighting.
This mode allows you to manually switch between modes
through the Live Video page.
This sets the camera to always use Day mode.
This sets the camera to always use Night mode.
This sets the camera to use Day mode during the times you
specify, and will switch to Night mode outside the times you
specify.
48D-Link DCS-5030L User Manual 48
Section 3 - Conguration
Camera Control
This section allows you to congure the pan and tilt operations of your camera. You can specify the lens location for the Home
button, and specify up to 24 pre-set lens locations, allowing you to quickly view these pre-determined areas of the camera’s
range from the Live Video screen.
Pan/Tilt
Wheel:
Set as Home:
Default
Home:
Pan Step:
Tilt Step:
Use the directional arrows on the wheel to move the camera
lens through its pan and tilt ranges.
Click this button to set the current lens location as the Home
location. Once set, the camera will return to this location
whenever the Home button in the center of the pan/tilt wheel
is clicked.
Clicking on this button returns the Home location to the factory
default setting.
Select the increment of movement for each press of a pan (up/
down)arrow on the pan/tilt wheel.
Select the increment of movement for each press of a tilt (left/
right) arrow on the pan/tilt wheel.
49D-Link DCS-5030L User Manual 49
Section 3 - Conguration
The camera allows you to specify up to 24 pre-determined lens
positions, which can be used to quickly move the camera’s
view to areas of interest.
• Select the number of the position that you would like
to specify.
• Use the pan/tilt wheel to move the camera’s lens to the
desired preset position.
• Enter a name to help you easily identify the preset.
• Click on the Set button to save the preset.
• Any pre-saved positions can be cleared by selecting the
desired preset and clicking on the Clear button.
Preset
Position:
50D-Link DCS-5030L User Manual 50
Section 3 - Conguration
SD Recording
This section allows you to congure the recording schedule and settings for the microSD card in your camera.
Enable
recording of
images to SD
card:
Recording
Interval:
SD Card:
Enable
recording of
video clip to
SD card:
File Format:
Recording
Length:
SD Card:
Tick the box and select a method of triggering image recording
from Always, Schedule, or Motion/Sound Detection. If you
chose Schedule, you can then specify the days and times you
wish to activate recording.
You can input the time in seconds between each image to be
recorded.
Enter the space in MB that you want to reserve on your SD card
for other recordings. Tick Cyclic if you want to record over old
images as soon as the free space limit is reached.
Tick the box and select a method of triggering video recording
from Always, Schedule, or Motion/Sound Detection. If you
chose Schedule, you can then specify the days and times you
wish to activate recording.
Select either AVI or MP4 (for MPEG4) from the drop-down menu
if you have a preferred format for compatibility on devices. MP4
les are smaller in size but is lower quality if storage is an issue.
Select from 1 to 6 minutes of time for each recording.
Enter the space in MB that you want to reserve on your SD card
for other recordings. Tick Cyclic if you want to record over old
images as soon as the free space limit is reached.
51D-Link DCS-5030L User Manual 51
Section 3 - Conguration
Click the Test button after conguring your settings to test
your system.
Test SD Card:
52D-Link DCS-5030L User Manual 52
Section 3 - Conguration
SD Management
This page allows you to browse and manage the recorded les on a microSD card which has been inserted into the camera.
Note: It is recommended to use the Format SD Card function when inserting a microSD card for the rst time.
Format SD
Card:
Delete:
Name:
Size:
Refresh:
Files per
page:
Pages:
Click to automatically format the SD card and create a folder
for video. Formatting your SD card will erase all data currently
saved.
Click the checkbox under the Delete column to select les meant
for deletion. The Delete button is used to delete the les which
are selected.
The name of le recording.
The le’s size.
Click to refresh the page.
Select the number of les to be displayed on a single page. The
maximum is 25 les.
Show the current and total number of pages and lets you jump
to a page.
53D-Link DCS-5030L User Manual 53
Section 3 - Conguration
Maintenance
Admin
This section allows you to change the administrator’s password and congure the server settings for your camera. You can also
manage the user account(s) that are allowed to access to your camera.
Admin
Password:
Camera Name:
LED Control:
User Access
Control:
Snapshot
URL
Authentication:
OSD Time:
Add User
Account:
To change the admin password used to log into the web
interface, enter the old password, then enter the new password
and retype it in the next text box, then click Apply.
Specify a name for your camera.
Select Normal to enable the LEDs on the front of the device, or
select O to disable the LED. Disabling the LED function may
be useful if you want to make the camera less obvious.
Select Enable to enable user access control or Disable to allow
only the administrator account to access the camera.
Select Enable to allow access to the current camera snapshot
via the web address indicated.
Select Enable to allow the current time to be added to the
camera video, and select a color to use for the text.
You can create new users to provide viewing access for your
camera’s video. User accounts will only be able to access the Live
Video section of the web conguration interface, but cannot
access any other parts or change any settings.
54D-Link DCS-5030L User Manual 54
Section 3 - Conguration
To create a new user, enter a user name, password, and retype
the password, then click Add. A maximum of 8 user accounts
can be created.
Displays the account names of authorized users. You can modify
or delete an account by clicking on its modify or delete icon.
User List:
55D-Link DCS-5030L User Manual 55
Section 3 - Conguration
System
This section allows you to save and restore your conguration, restore the factory settings, and/or restart the camera.
Save To Local
Hard Drive:
Load From
Local Hard
Drive:
Restore
To Factory
Default:
Reboot The
Device:
Click the Save Conguration button to save the current camera
conguration to your local PC.
To load a previously saved conguration, click the Browse...
button, select your saved configuration file, then click the
Restore Conguration From File button.
Click the Restore Factory Defaults button to reset all settings
back to the factory defaults. Please note that this will erase any
changes you have made to the settings of the camera.
Click the Reboot the Device button to reboot the camera.
56D-Link DCS-5030L User Manual 56
Section 3 - Conguration
Firmware Upgrade
Your current rmware version and date will be displayed on your screen. You may go to the D-Link Support Page to check for
the latest rmware versions available.
To upgrade the rmware on your DCS-5030L, download the latest rmware from
the D-Link Support Page to your local hard drive. Click the Browse... button
and select the rmware le, then click the Upload button to start the rmware
upgrade.
Warning: The rmware upgrade process must not be interrupted or the camera
may be damaged. When upgrading rmware, do not unplug the camera or your
PC, or close your web browser until the process is complete. It is also highly
recommended that you use a wired connection for your camera and PC when
upgrading rmware.
57D-Link DCS-5030L User Manual 57
Section 3 - Conguration
Status
Device Info
This section displays all the detailed information about your device and network settings.
58D-Link DCS-5030L User Manual 58
Section 3 - Conguration
Active User
This page lists all the active users’ information including the User Name, IP address, and the time that camera access began.
59D-Link DCS-5030L User Manual 59
Section 3 - Conguration
Help
This page lists all the topics and links to respective helpful instructions for each feature.
60D-Link DCS-5030L User Manual
Section 4 - Troubleshooting
Troubleshooting
1. What is Remote Access? How do I enable it?
Remote Access allows you to access your camera from any PC connected to the Internet through a web browser. This lets you
view your camera feed and manage your camera’s settings when you’re away from home.
To enable Remote Access, simply go through the mydlink Lite setup. After going through the wizard, you can tap Remote on
the login page.
If you remote access is not working, check that:
• the front LED on your camera is lit solid green
• your Internet connection is working
• your router’s LAN & WAN connections are working properly
• your router has UPnP enabled (if your router does not support UPnP, please refer to Appendix A)
• your router can obtain a public IP address
• your router’s rmware has been upgraded to the latest version
• you have tried rebooting your router by unplugging it, then plugging it back in
2. What can I do if I forget the password for my camera’s web conguration interface?
If you forget your password, you will need to perform a factory reset of your camera. This process will change all your settings
back to the factory defaults. It is therefore recommended that you make a record of the password for future reference.
To reset your camera, please use an unfolded paperclip to press and hold the RESET button for at least 10 seconds while your
camera is plugged in.
61D-Link DCS-5030L User Manual
Section 4 - Troubleshooting
3. The image on the live view is blurry or out of focus, what can I do?
You can manually adjust the focus of the lens by rotating the bezel on the front of the camera (surrounding the lens). While
watching the live view, rotate the bezel until the desired level of focus is achieved.
4. Why don’t the LEDs light up?
The power supply might be faulty. Conrm that you are using the provided DC 12 V power supply for this network camera.
Verify that the power supply is correctly connected. The WPS LED will only turn on if there is a WPS connection present, the
camera may still be functioning correctly even if this LED is not lit. If the camera is functioning normally, the LEDs may have
been disabled. See Admin on page 53 for information about how to enable the LEDs.
5. Why is the camera’s network connection unreliable?
There might be a problem with the network cable. To conrm that the cables are working, PING the address of a known device
on the network. If the cabling is OK and your network is reachable, you should receive a reply similar to the following (…bytes
= 32 time = 2 ms).
Another possible problem may be that the network device such as a hub or switch utilized by the Network Camera is not
functioning properly. Please conrm the power for the devices are well connected and functioning properly.
If you are using a wireless connection to connect the camera, be aware of the range limitations of the wireless N standard.
Most wireless N devices have a maximum indoor range of around 70 metres (230 feet). Also be aware that obstacles such as
walls, oors, doors and other solid objects can have an adverse eect on signal range.
6. Why does a series of broad vertical white lines appear through out the image?
It could be that the image sensor has become overloaded when it has been exposed to bright light such as direct exposure
to sunlight or halogen lights. Reposition the camera into a more shaded area immediately, as prolonged exposure to bright
lights will damage the sensor.
62D-Link DCS-5030L User Manual
Section 4 - Troubleshooting
7. The camera is producing noisy images. How can I solve the problem?
The video images might be noisy if the camera is used in a very low light environment. Try switching to night mode if you are
consistently monitoring a low light area.
8. The images are poor quality, how can I improve the image quality?
Make sure that your computer’s display properties are set to at least 6-bit color. Using 16 or 256 colors on your computer will
produce dithering artifacts in the image, making the image look as if it is of poor quality.
You may also need to check your image settings to make sure the brightness, contrast, and other settings are set properly. For
more, refer to Image Setup on page 36.
9. Why are no images available through the Web browser?
ActiveX might be disabled. If you are viewing the images from Internet Explorer make sure ActiveX has been enabled in the
Internet Options menu. You may also need to change the security settings on your browser to allow the ActiveX plug-in to be
installed. Also, check that you have the latest version of Java installed. Java can be downloaded from http://www.java.com
If you are using Internet Explorer with a version number 6 or lower, then you will need to upgrade your Web browser software
in order to view the streaming video transmitted by the Network Camera.
63D-Link DCS-5030L User Manual
Appendix A - Technical Specications
Technical Specications
System Requirements
• Microsoft Windows® 101/8/7/Vista, or Mac OS X 10.6 or higher
• PC with 1.3 GHz or above and at least 128 MB RAM
• Internet Explorer 8, Firefox 12, Safari 6, or Chrome 202 or higher
version with Java installed and enabled
Networking Protocol
• IPV4, ARP, TCP, UDP, ICMP
• DHCP Client
• NTP Client (D-Link)
• DNS Client
• DDNS Client (Dyndns and D-Link)
• SMTP Client
• FTP Client
• HTTP Server
• PPPoE
• UPnP Port Forwarding
• LLTD
Built-In Protocol
• 10/100 BASE-T Fast Ethernet
• 802.11n/g/b WLAN
Wireless Connectivity
• 802.11n/g/b Wireless with WEP/WPA/WPA2 security
• WPS
Wireless Transmit Output Power (typical)
• 802.11b - 16 dbm
• 802.11g/11n - 12 dbm
Reset Button
• Reset to factory default
Video Codecs
• H.264
• MJPEG
• JPEG for still images
Video Features
• Adjustable image size and quality
• Time stamp and text overlay
• Flip and mirror
• Resolution
• 1280 x 720 (default)
• 640 x 480
• 320 x 240 at frame rates up to 30 fps
Lens
• Fixed length: 2.38 mm, Aperture: F2.2
Sensor
• 1/4” 720P progressive CMOS sensor
IR LED
• 0 lux with IR LEDs on
1 Edge browser is not supported.
2 mydlink Portal only.
64D-Link DCS-5030L User Manual
Appendix A - Technical Specications
Minimum Illumination
• Color: 1 lux @ F2.0 (Day)
• B/W: 0 lux @ F2.0 (Night)
Viewing Angle
• Horizontal: 94.36°
• Vertical: 59.3°
• Diagonal: 110.44°
Pan/Tilt Range
• Pan Range: +170° ~ -170° (total 340°)
• Tilt Range: +90° ~ -20° (total 110°)
Digital Zoom
• Up to 4x
3A Control
• AGC (Auto Gain Control)
• AWB (Auto White Balance)
• AES (Auto Electronic Shutter)
Power
• Input: 100-240 V AC, 50/60 Hz
• Output: 5 V DC 1.5 A, 50/60 Hz
Dimensions (W x D x H)
• Camera Only - 116.4 x 109.1 x 133.6 mm (4.58 x 4.29 x 5.26 inches)
• Camera Including Mounting Bracket - 116.4 x 109.1 x 230.0 mm
(4.58 x 4.29 x 9.06 inches)
Weight
• Device: 292.4 grams (0.64 lbs)
• Stand: 60.8 grams (0.13 lbs)
Max Power Consumption
• 5.56 W
Operation Temperature
• 0 ˚C to 40 ˚C (32 ˚F to 104 ˚F)
Storage Temperature
• -25 ˚C to 70 ˚C (-13 ˚F to 158 ˚F)
Operation Humidity
• 20 to 85% RH non-condensing
Storage Humidity
• 5 to 95% RH non-condensing
Emission (EMI), Safety & Other Certications
• FCC Class B
• IC
• C-Tick
• CE
65D-Link DCS-5030L User Manual
Appendix B - Regulatory Information
Regulatory Statements
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to
correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Non-modications Statement:
Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this
equipment.
Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance
with FCC multi-transmitter product procedures. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection
of other channels is not possible.
Note
The country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in
the USA must be xed to USA operational channels only.
66D-Link DCS-5030L User Manual
Appendix B - Regulatory Information
IMPORTANT NOTICE:
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20 cm between the radiator and your body.
Industry Canada Statement:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si lebrouillage est susceptible d'en compromettre le
fonctionnement.
(ii) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz
shall be such that the equipment still complies with the e.i.r.p. limit;
(ii) pour les dispositifs munis d'antennes amovibles, le gain maximal d'antenne permis pour les dispositifs utilisant les bandes de 5250 à
5350MHz et de 5470 à 5725 MHz doit être conforme à la limite de la p.i.r.e;
67D-Link DCS-5030L User Manual
Appendix B - Regulatory Information
以下警語適用台灣地區
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之
特性及功能。低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善
至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工
業、科學及醫療用電波輻射性電機設備之干擾。
電磁波曝露量MPE標準值(MPE) 1 mW/cm2，送測產品實值為 0 mW/cm2
本模組於取得認證後將依規定於模組本體標示審驗合格標籤系統廠商應於平台上標示「本產品內含射頻模 組:
<CCAFXXLPXXXXTX>」字樣
NCC 警 語：
68D-Link DCS-5030L User Manual
Appendix B - Regulatory Information
Frequency Band(s)
Frequenzband
Fréquence bande(s)
Bandas de Frecuencia
Frequenza/e
Frequentie(s)
Max. Output Power (EIRP)
Max. Output Power
Consommation d’énergie max.
Potencia máxima de Salida
Potenza max. Output
Max. Output Power
2.4 G 2.4 – 2.4835 GHz 100 mW
69D-Link DCS-5030L User Manual
Appendix B - Regulatory Information
European Community Declaration of Conformity:
Česky [Czech]
Tímto D-Link Corporation prohlašuje, že tento produkt, jeho příslušenství a software jsou v souladu se směrnicí
2014/53/EU. Celý text ES prohlášení o shodě vydaného EU a o rmwaru produktu lze stáhnout na stránkách k
produktu www.dlink.com.
Dansk [Danish]
D-Link Corporation erklærer herved, at dette produkt, tilbehør og software er i overensstemmelse med direktiv
2014/53/EU. Den fulde tekst i EU-overensstemmelseserklæringen og produktrmware kan wnloades fra
produktsiden hos www.dlink.com.
Deutsch [German]
Hiermit erklärt die D-Link Corporation, dass dieses Produkt, das Zubehör und die Software der Richtlinie 2014/53/
EU entsprechen. Der vollständige Text der Konformitätserklärung der Europäischen Gemeinschaft sowie die
Firmware zum Produkt stehen Ihnen zum Herunterladen von der Produktseite im Internet auf www.dlink.com zur
Verfügung.
Eesti [Estonian]
Käesolevaga kinnitab D-Link Corporation, et see toode, tarvikud ja tarkvara on kooskõlas direktiiviga 2014/53/EL.
Euroopa Liidu vastavusdeklaratsiooni täistekst ja toote püsivara on allalaadimiseks saadaval tootelehel www.dlink.
com.
English
Hereby, D-Link Corporation, declares that this product, accessories, and software are in compliance with directive
2014/53/EU. The full text of the EU Declaration of Conformity and product rmware are available for download
from the product page at www.dlink.com
Español [Spanish]
Por la presente, D-Link Corporation declara que este producto, accesorios y software cumplen con las directivas
2014/53/UE. El texto completo de la declaración de conformidad de la UE y el rmware del producto están
disponibles y se pueden descargar desde la página del producto en www.dlink.com.
Ελληνική [Greek]
Με την παρούσα, η D-Link Corporation δηλώνει ότι αυτό το προϊόν, τα αξεσουάρ και το λογισμικό
συμμορφώνονται με την Οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλωσης συμμόρφωσης της ΕΕ και το
υλικολογισμικό του προϊόντος είναι διαθέσιμα για λήψη από τη σελίδα του προϊόντος στην τοποθεσία www.dlink.
com.
Français [French]
Par les présentes, D-Link Corporation déclare que ce produit, ces accessoires et ce logiciel sont conformes aux
directives 2014/53/UE.Le texte complet de la déclaration de conformité de l'UE et le icroprogramme du produit
sont disponibles au téléchargement sur la page des produits à www.dlink.com.
Italiano [Italian]
Con la presente, D-Link Corporation dichiara che questo prodotto, i relativi accessori e il software sono conformi
alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformità UE e il rmware del prodotto sono
disponibili per il download dalla pagina del prodotto su www.dlink.com.
Latviski [Latvian]
Ar šo uzņēmums D-Link Corporation apliecina, ka šis produkts, piederumi un programmatūra atbilst direktīvai
2014/53/ES. ES atbilstības deklarācijas pilno tekstu un produkta aparātprogrammatūru var lejupielādēt attiecīgā
produkta lapā vietnē www.dlink.com.
70D-Link DCS-5030L User Manual
Appendix B - Regulatory Information
Lietuvių [Lithuanian]
Šiuo dokumentu „D-Link Corporation“ pareiškia, kad šis gaminys, priedai ir programinė įranga atitinka direktyvą
2014/53/ES. Visą ES atitikties deklaracijos tekstą ir gaminio programinę aparatinę įrangą galima atsisiųsti iš gaminio
puslapio adresu www.dlink.com.
Nederlands [Dutch]
Hierbij verklaart D-Link Corporation dat dit product, accessoires en software voldoen aan de richtlijnen 2014/53/
EU. De volledige tekst van de EU conformiteitsverklaring en productrmware is beschikbaar voor download van de
productpagina op www.dlink.com.
Malti [Maltese]
Bil-preżenti, D-Link Corporation tiddikjara li dan il-prodott, l-aċċessorji, u s-software huma konformi mad-Direttiva
2014/53/UE. Tista’ tniżżel it-test sħiħ tad-dikjarazzjoni ta’ konformità tal-UE u l-rmware tal-prodott mill-paġna tal-
prodott fuq www.dlink.com.
Magyar [Hungarian]
Ezennel a D-Link Corporation kijelenti, hogy a jelen termék, annak tartozékai és szoftvere megfelelnek a 2014/53/
EU sz. rendeletek rendelkezéseinek. Az EU Megfelelőségi nyilatkozat teljes szövege és a termék rmware a termék
oldaláról tölthető le a www.dlink.com címen.
Polski [Polish]
D-Link Corporation niniejszym oświadcza, że ten produkt, akcesoria oraz oprogramowanie są zgodne z
dyrektywami 2014/53/EU. Pełen tekst deklaracji zgodności UE oraz oprogramowanie sprzętowe do produktu
można pobrać na stronie produktu w witrynie www.dlink.com.
Português [Portuguese] Desta forma, a D-Link Corporation declara que este produto, os acessórios e o software estão em conformidade
com a diretiva 2014/53/UE. O texto completo da declaração de conformidade da UE e do rmware
Slovensko[Slovenian]
Podjetje D-Link Corporation s tem izjavlja, da so ta izdelek, dodatna oprema in programnska oprema skladni z
direktivami 2014/53/EU. Celotno besedilo izjave o skladnosti EU in vdelana programska oprema sta na voljo za
prenos na strani izdelka na www.dlink.com.
Slovensky [Slovak]
Spoločnosť D-Link týmto vyhlasuje, že tento produkt, príslušenstvo a softvér sú v súlade so smernicou 214/53/
EÚ. Úplné znenie vyhlásenia EÚ o zhode a rmvéri produktu sú k dispozícii na prevzatie zo stránky produktu www.
dlink.com.
Suomi [Finnish]
D-Link Corporation täten vakuuttaa, että tämä tuote, lisävarusteet ja ohjelmisto ovat direktiivin 2014/53/EU
vaatimusten mukaisia. Täydellinen EU-vaatimustenmukaisuusvakuutus samoin kuin tuotteen laiteohjelmisto ovat
ladattavissa osoitteesta www.dlink.com.
Svenska[Swedish]
D-Link Corporation försäkrar härmed att denna produkt, tillbehör och programvara överensstämmer med
direktiv 2014/53/EU. Hela texten med EU-försäkran om överensstämmelse och produkt-rmware kan hämtas från
produktsidan på www.dlink.com.
71D-Link DCS-5030L User Manual
Appendix B - Regulatory Information
Íslenska [Icelandic]
Hér með lýsir D-Link Corporation því yr að þessi vara, fylgihlutir og hugbúnaður eru í samræmi við tilskipun
2014/53/EB. Sækja má ESB-samræmisyrlýsinguna í heild sinni og fastbúnað vörunnar af vefsíðu vörunnar á www.
dlink.com.
Norsk [Norwegian]
Herved erklærer D-Link Corporation at dette produktet, tilbehøret og programvaren er i samsvar med direktivet
2014/53/EU. Den fullstendige teksten i EU-erklæring om samsvar og produktets fastvare er tilgjengelig for
nedlasting fra produktsiden på www.dlink.com.
Warning Statement:
The power outlet should be near the device and easily accessible.
72D-Link DCS-5030L User Manual
Appendix B - Regulatory Information
NOTICE OF WIRELESS RADIO LAN USAGE IN THE EUROPEAN COMMUNITY FOR WIRELESS PRODUCT ONLY:
• This device is restricted to indoor use when operated in the European Community using channels in the 5.15-5.35 GHz band to reduce the
potential for interference.
• This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries. This
equipment may be operated in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES,
CI, HU, and CY.
Usage Notes:
• To remain in conformance with European National spectrum usage regulations, frequency and channel limitations will be applied on the
products according to the country where the equipment will be deployed.
• This device is restricted from functioning in Ad-hoc mode while operating in 5 GHz. Ad-hoc mode is direct peer-to-peer communication
between two client devices without an Access Point.
• Access points will support DFS (Dynamic Frequency Selection) and TPC (Transmit Power Control) functionality as required when operating in
5 GHz band within the EU.
• Please refer to the product manual or datasheet to check whether your product uses 2.4 GHz and/or 5 GHz wireless.
HINWEIS ZUR VERWENDUNG VON DRAHTLOS-NETZWERK (WLAN) IN DER EUROPÄISCHEN GEMEINSCHAFT ( NUR FÜR
EIN DRAHTLOSES PRODUKT )
• Der Betrieb dieses Geräts in der Europäischen Gemeinschaft bei Nutzung von Kanälen im 5,15-5,35 GHz Frequenzband ist ausschließlich auf
Innenräume beschränkt, um das Interferenzpotential zu reduzieren.
• Bei diesem Gerät handelt es sich um ein zum Einsatz in allen EU-Mitgliedsstaaten und in EFTA-Ländern - ausgenommen Frankreich. Der
Betrieb dieses Geräts ist in den folgenden Ländern erlaubt: AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT,
PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY
Gebrauchshinweise:
• Um den in Europa geltenden nationalen Vorschriften zum Nutzen des Funkspektrums weiterhin zu entsprechen, werden Frequenz und
Kanalbeschränkungen, dem jeweiligen Land, in dem das Gerät zum Einsatz kommt, entsprechend, auf die Produkte angewandt.
• Die Funktionalität im Ad-hoc-Modus bei Betrieb auf 5 GHz ist für dieses Gerät eingeschränkt. Bei dem Ad-hoc-Modus handelt es sich um eine
Peer-to-Peer-Kommunikation zwischen zwei Client-Geräten ohneeinen Access Point.
• Access Points unterstützen die Funktionen DFS (Dynamic Frequency Selection) und TPC (Transmit Power Control) wie erforderlich bei Betrieb
auf 5 GHz innerhalb der EU.
• Bitte schlagen Sie im Handbuch oder Datenblatt nach nach, ob Ihr Gerät eine 2,4 GHz und / oder 5 GHz Verbindung nutzt.
73D-Link DCS-5030L User Manual
Appendix B - Regulatory Information
AVIS CONCERNANT L'UTILISATION DE LA RADIO SANS FIL LAN DANS LA COMMUNAUTÉ EUROPÉENNE (UNIQUEMENT
POUR LES PRODUITS SANS FIL)
• Cet appareil est limité à un usage intérieur lorsqu'il est utilisé dans la Communauté européenne sur les canaux de la bande de 5,15 à 5,35 GHz
an de réduire les risques d'interférences.
• Cet appareil est un système de transmission à large bande (émetteur-récepteur) de 2,4 GHz, destiné à être utilisé dans tous les États-
membres de l'UE et les pays de l'AELE. Cet équipement peut être utilisé dans les pays suivants : AL, AD, BE , BG, DK, DE, FI, FR, GR, GW, IS, IT,
HR, LI, LU, MT , MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY
Notes d'utilisation:
• Pour rester en conformité avec la réglementation nationale européenne en matière d'utilisation du spectre, des limites de fréquence et de
canal seront appliquées aux produits selon le pays où l'équipement sera déployé.
• Cet appareil ne peut pas utiliser le mode Ad-hoc lorsqu'il fonctionne dans la bande de 5 GHz. Le mode Adhoc fournit une communication
directe pair à pair entre deux périphériques clients sans point d'accès.
• Les points d'accès prendront en charge les fonctionnalités DFS (Dynamic Frequency Selection) et TPC (Transmit Power Control) au besoin lors
du fonctionnement dans la bande de 5 GHz au sein de l'UE.
• Merci de vous référer au guide d'utilisation ou de la che technique an de vérier si votre produit utilise 2.4 GHz et/ou 5 GHz sans l.
AVISO DE USO DE LA LAN DE RADIO INALÁMBRICA EN LA COMUNIDAD EUROPEA (SOLO PARA EL PRODUCTO
INALÁMBRICO)
• El uso de este dispositivo está restringido a interiores cuando funciona en la Comunidad Europea utilizando canales en la banda de 5,15-5,35
GHz, para reducir la posibilidad de interferencias.
• Este dispositivo es un sistema de transmisión (transceptor) de banda ancha de 2,4 GHz, pensado para su uso en todos los estados miembros
de la UE y en los países de la AELC. Este equipo se puede utilizar en AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL,
NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY
Notas de uso:
• Para seguir cumpliendo las normas europeas de uso del espectro nacional, se aplicarán limitaciones de frecuencia y canal en los productos
en función del país en el que se pondrá en funcionamiento el equipo.
• Este dispositivo tiene restringido el funcionamiento en modo Ad-hoc mientras funcione a 5 Ghz. El modo Ad-hoc es la comunicación directa
de igual a igual entre dos dispositivos cliente sin un punto de acceso.
• Los puntos de acceso admitirán la funcionalidad DFS (Selección de frecuencia dinámica) y TPC (Control de la potencia de transmisión) si es
necesario cuando funcionan a 5 Ghz dentro de la UE.
• Por favor compruebe el manual o la cha de producto para comprobar si el producto utiliza las bandas inalámbricas de 2.4 GHz y/o la de 5
GHz.
74D-Link DCS-5030L User Manual
Appendix B - Regulatory Information
AVVISO PER L’USO DI LAN RADIO WIRELESS NELLA COMUNITÀ EUROPEA (SOLO PER PRODOTTI WIRELESS)
• Nella Comunità europea, l’uso di questo dispositivo è limitato esclusivamente agli ambienti interni sui canali compresi nella banda da 5,15 a
5,35 GHz al ne di ridurre potenziali interferenze. Questo dispositivo è un sistema di trasmissione a banda larga a 2,4 GHz (ricetrasmittente),
destinato all’uso in tutti gli stati membri dell’Unione europea e nei paesi EFTA.
• Questo dispositivo può essere utilizzato in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM,
SE, RS, SK, ES, CI, HU, CY
Note per l’uso
• Al ne di mantenere la conformità alle normative nazionali europee per l’uso dello spettro di frequenze, saranno applicate limitazioni sulle
frequenze e sui canali per il prodotto in conformità alle normative del paese in cui il dispositivo viene utilizzato.
• Questo dispositivo non può essere attivato in modalità Ad-hoc durante il funzionamento a 5 Ghz. La modalità Ad-hoc è una comunicazione
diretta peer-to-peer fra due dispositivi client senza un punto di accesso.
• I punti di accesso supportano le funzionalità DFS (Dynamic Frequency Selection) e TPC (Transmit Power Control) richieste per operare a 5 Ghz
nell’Unione europea.
• Ti invitiamo a fare riferimento al manuale del prodotto o alla scheda tecnica per vericare se il tuo prodotto utilizza le frequenze 2,4 GHz e/o
5 GHz.
KENNISGEVING VAN DRAADLOOS RADIO LAN-GEBRUIK IN DE EUROPESE GEMEENSCHAP (ALLEEN VOOR
DRAADLOOS PRODUCT)
• Dit toestel is beperkt tot gebruik binnenshuis wanneer het wordt gebruikt in de Europese Gemeenschap gebruik makend van kanalen in de
5.15-5.35 GHz band om de kans op interferentie te beperken.
• Dit toestel is een 2.4 GHz breedband transmissiesysteem (transceiver) dat bedoeld is voor gebruik in alle EU lidstaten en EFTA landen. Deze
uitrusting mag gebruikt worden in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK,
ES, CI, HU, CY
Gebruiksaanwijzingen:
• Om de gebruiksvoorschriften van het Europese Nationale spectrum na te leven, zullen frequentie- en kanaalbeperkingen worden toegepast
op de producten volgens het land waar de uitrusting gebruikt zal worden.
• Dit toestel kan niet functioneren in Ad-hoc mode wanneer het gebruikt wordt in 5 GHz. Ad-hoc mode is directe peer-to-peer communicatie
tussen twee klantenapparaten zonder een toegangspunt.
• Toegangspunten ondersteunen DFS (Dynamic Frequency Selection) en TPC (Transmit Power Control) functionaliteit zoals vereist bij gebruik
in 5 GHz binnen de EU.
• Raadpleeg de handleiding of de datasheet om te controleren of uw product gebruik maakt van 2.4 GHz en/of 5 GHz.
75D-Link DCS-5030L User Manual
Appendix B - Regulatory Information
SAFETY INSTRUCTIONS
The following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage.
Remember to consult the product user instructions for more details.
• Static electricity can be harmful to electronic components. Discharge static electricity from your body (i.e. touching grounded bare metal)
before touching the product.
• Do not attempt to service the product and never disassemble the product. For some products with a user replaceable battery, please read
and follow the instructions in the user manual.
• Do not spill food or liquid on your product and never push any objects into the openings of your product.
• Do not use this product near water, areas with high humidity, or condensation unless the product is specically rated for outdoor application.
• Keep the product away from radiators and other heat sources.
• Always unplug the product from mains power before cleaning and use a dry lint free cloth only.
SICHERHEITSVORSCHRIFTEN
Die folgenden allgemeinen Sicherheitsvorschriften dienen als Hilfe zur Gewährleistung Ihrer eigenen Sicherheit und zum Schutz Ihres Produkts.
Weitere Details nden Sie in den Benutzeranleitungen zum Produkt.
• Statische Elektrizität kann elektronischen Komponenten schaden. Um Schäden durch statische Auadung zu vermeiden, leiten Sie
elektrostatische Ladungen von Ihrem Körper ab,
(z. B. durch Berühren eines geerdeten blanken Metallteils), bevor Sie das Produkt berühren.
• Unterlassen Sie jeden Versuch, das Produkt zu warten, und versuchen Sie nicht, es in seine Bestandteile zu zerlegen. Für einige Produkte mit
austauschbaren Akkus lesen Sie bitte das Benutzerhandbuch und befolgen Sie die dort beschriebenen Anleitungen.
• Vermeiden Sie, dass Speisen oder Flüssigkeiten auf Ihr Produkt gelangen, und stecken Sie keine Gegenstände in die Gehäuseschlitze oder
-önungen Ihres Produkts.
• Verwenden Sie dieses Produkt nicht in unmittelbarer Nähe von Wasser und nicht in Bereichen mit hoher Luftfeuchtigkeit oder Kondensation,
es sei denn, es ist speziell zur Nutzung in Außenbereichen vorgesehen und eingestuft.
• Halten Sie das Produkt von Heizkörpern und anderen Quellen fern, die Wärme erzeugen.
• Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschließlich ein trockenes fusselfreies
Tuch.
76D-Link DCS-5030L User Manual
Appendix B - Regulatory Information
CONSIGNES DE SÉCURITÉ
Les consignes générales de sécurité ci-après sont fournies an d’assurer votre sécurité personnelle et de protéger le produit d’éventuels
dommages. Veuillez consulter les consignes d’utilisation du produit pour plus de détails.
• L’électricité statique peut endommager les composants électroniques. Déchargez l’électricité statique de votre corps (en touchant un objet
en métal relié à la terre par exemple) avant de toucher le produit.
• N’essayez pas d’intervenir sur le produit et ne le démontez jamais. Pour certains produits contenant une batterie remplaçable par l’utilisateur,
veuillez lire et suivre les consignes contenues dans le manuel d’utilisation.
• Ne renversez pas d’aliments ou de liquide sur le produit et n’insérez jamais d’objets dans les orices.
• N’utilisez pas ce produit à proximité d’un point d’eau, de zones très humides ou de condensation sauf si le produit a été spéciquement
conçu pour une application extérieure.
• Éloignez le produit des radiateurs et autres sources de chaleur.
• Débranchez toujours le produit de l’alimentation avant de le nettoyer et utilisez uniquement un chion sec non pelucheux.
INSTRUCCIONES DE SEGURIDAD
Las siguientes directrices de seguridad general se facilitan para ayudarle a garantizar su propia seguridad personal y para proteger el producto
frente a posibles daños. No olvide consultar las instrucciones del usuario del producto para obtener más información.
• La electricidad estática puede resultar nociva para los componentes electrónicos. Descargue la electricidad estática de su cuerpo (p. ej.,
tocando algún metal sin revestimiento conectado a tierra) antes de tocar el producto.
• No intente realizar el mantenimiento del producto ni lo desmonte nunca. Para algunos productos con batería reemplazable por el usuario,
lea y siga las instrucciones del manual de usuario.
• No derrame comida o líquidos sobre el producto y nunca deje que caigan objetos en las aberturas del mismo.
• No utilice este producto cerca del agua, en zonas con humedad o condensación elevadas a menos que el producto esté clasicado
especícamente para aplicación en exteriores.
• Mantenga el producto alejado de los radiadores y de otras fuentes de calor.
• Desenchufe siempre el producto de la alimentación de red antes de limpiarlo y utilice solo un paño seco sin pelusa.
77D-Link DCS-5030L User Manual
Appendix B - Regulatory Information
ISTRUZIONI PER LA SICUREZZA
Le seguenti linee guida sulla sicurezza sono fornite per contribuire a garantire la sicurezza personale degli utenti e a proteggere il prodotto da
potenziali danni. Per maggiori dettagli, consultare le istruzioni per l’utente del prodotto.
• L’elettricità statica può essere pericolosa per i componenti elettronici. Scaricare l’elettricità statica dal corpo (ad esempio toccando una parte
metallica collegata a terra) prima di toccare il prodotto.
• Non cercare di riparare il prodotto e non smontarlo mai. Per alcuni prodotti dotati di batteria sostituibile dall’utente, leggere e seguire le
istruzioni riportate nel manuale dell’utente.
• Non versare cibi o liquidi sul prodotto e non spingere mai alcun oggetto nelle aperture del prodotto.
• Non usare questo prodotto vicino all’acqua, in aree con elevato grado di umidità o soggette a condensa a meno che il prodotto non sia
specicatamente approvato per uso in ambienti esterni.
• Tenere il prodotto lontano da caloriferi e altre fonti di calore.
• Scollegare sempre il prodotto dalla presa elettrica prima di pulirlo e usare solo un panno asciutto che non lasci lacce.
VEILIGHEIDSINFORMATIE
De volgende algemene veiligheidsinformatie werd verstrekt om uw eigen persoonlijke veiligheid te waarborgen en uw product te beschermen
tegen mogelijke schade. Denk eraan om de gebruikersinstructies van het product te raadplegen voor meer informatie.
• Statische elektriciteit kan schadelijk zijn voor elektronische componenten. Ontlaad de statische elektriciteit van uw lichaam (d.w.z. het
aanraken van geaard bloot metaal) voordat uhet product aanraakt.
• U mag nooit proberen het product te onderhouden en u mag het product nooit demonteren. Voor sommige producten met door de
gebruiker te vervangen batterij, dient u de instructies in de gebruikershandleiding te lezen en te volgen.
• Mors geen voedsel of vloeistof op uw product en u mag nooit voorwerpen in de openingen van uw product duwen.
• Gebruik dit product niet in de buurt van water, gebieden met hoge vochtigheid of condensatie, tenzij het product speciek geclassiceerd is
voor gebruik buitenshuis.
• Houd het product uit de buurt van radiators en andere warmtebronnen.
• U dient het product steeds los te koppelen van de stroom voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek.
78D-Link DCS-5030L User Manual
Appendix B - Regulatory Information
Disposing of and Recycling Your Product
ENGLISH EN
This symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed
of in household waste but sent for recycling. Please take it to a collection point designated by your local authorities once it has
reached the end of its life, some will accept products for free. By recycling the product and its packaging in this manner you help
to conserve the environment and protect human health.
D-Link and the Environment
At D-Link, we understand and are committed to reducing any impact our operations and products may have on the environment. To minimise
this impact D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both
products and packaging.
D-Link recommends that you always switch o or unplug your D-Link products when they are not in use. By doing so you will help to save energy
and reduce CO2 emissions.
To learn more about our environmentally responsible products and packaging please visit www.dlinkgreen.com.
DEUTSCH DE
Dieses Symbol auf dem Produkt oder der Verpackung weist darauf hin, dass dieses Produkt gemäß bestehender örtlicher Gesetze
und Vorschriften nicht über den normalen Hausmüll entsorgt werden sollte, sondern einer Wiederverwertung zuzuführen ist. Bringen
Sie es bitte zu einer von Ihrer Kommunalbehörde entsprechend amtlich ausgewiesenen Sammelstelle, sobald das Produkt das Ende
seiner Nutzungsdauer erreicht hat. Für die Annahme solcher Produkte erheben einige dieser Stellen keine Gebühren. Durch ein auf
diese Weise durchgeführtes Recycling des Produkts und seiner Verpackung helfen Sie, die Umwelt zu schonen und die menschliche
Gesundheit zu schützen.
D-Link und die Umwelt
D-Link ist sich den möglichen Auswirkungen seiner Geschäftstätigkeiten und seiner Produkte auf die Umwelt bewusst und fühlt sich verpichtet,
diese entsprechend zu mindern. Zu diesem Zweck entwickelt und stellt D-Link seine Produkte mit dem Ziel größtmöglicher Umweltfreundlichkeit
her und verwendet wiederverwertbare, schadstoarme Materialien bei Produktherstellung und Verpackung.
D-Link empehlt, Ihre Produkte von D-Link, wenn nicht in Gebrauch, immer auszuschalten oder vom Netz zu nehmen. Auf diese Weise helfen
Sie, Energie zu sparen und CO2-Emissionen zu reduzieren.
Wenn Sie mehr über unsere umweltgerechten Produkte und Verpackungen wissen möchten, nden Sie entsprechende Informationen im Internet
unter www.dlinkgreen.com.
79D-Link DCS-5030L User Manual
Appendix B - Regulatory Information
FRANÇAIS FR
Ce symbole apposé sur le produit ou son emballage signie que, conformément aux lois et règlementations locales, ce produit ne
doit pas être éliminé avec les déchets domestiques mais recyclé. Veuillez le rapporter à un point de collecte prévu à cet eet par les
autorités locales; certains accepteront vos produits gratuitement. En recyclant le produit et son emballage de cette manière, vous
aidez à préserver l’environnement et à protéger la santé de l’homme.
D-Link et l’environnement
Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons à le réduire. Pour limiter
cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en utilisant des matériaux recyclables et faiblement
toxiques, tant dans ses produits que ses emballages.
D-Link recommande de toujours éteindre ou débrancher vos produits D-Link lorsque vous ne les utilisez pas. Vous réaliserez ainsi des économies
d’énergie et réduirez vos émissions de CO2.
Pour en savoir plus sur les produits et emballages respectueux de l’environnement, veuillez consulter le www.dlinkgreen.com.
ESPAÑOL ES
Este símbolo en el producto o el embalaje signica que, de acuerdo con la legislación y la normativa local, este producto no se debe
desechar en la basura doméstica sino que se debe reciclar. Llévelo a un punto de recogida designado por las autoridades locales una
vez que ha llegado al n de su vida útil; algunos de ellos aceptan recogerlos de forma gratuita. Al reciclar el producto y su embalaje
de esta forma, contribuye a preservar el medio ambiente y a proteger la salud de los seres humanos.
D-Link y el medio ambiente
En D-Link, comprendemos y estamos comprometidos con la reducción del impacto que puedan tener nuestras actividades y nuestros productos
en el medio ambiente. Para reducir este impacto, D-Link diseña y fabrica sus productos para que sean lo más ecológicos posible, utilizando
materiales reciclables y de baja toxicidad tanto en los productos como en el embalaje.
D-Link recomienda apagar o desenchufar los productos D-Link cuando no se estén utilizando. Al hacerlo, contribuirá a ahorrar energía y a reducir
las emisiones de CO2.
Para obtener más información acerca de nuestros productos y embalajes ecológicos, visite el sitio www.dlinkgreen.com.
80D-Link DCS-5030L User Manual
Appendix B - Regulatory Information
ITALIANO IT
La presenza di questo simbolo sul prodotto o sulla confezione del prodotto indica che, in conformità alle leggi e alle normative locali,
questo prodotto non deve essere smaltito nei riuti domestici, ma avviato al riciclo. Una volta terminato il ciclo di vita utile, portare il
prodotto presso un punto di raccolta indicato dalle autorità locali. Alcuni questi punti di raccolta accettano gratuitamente i prodotti
da riciclare. Scegliendo di riciclare il prodotto e il relativo imballaggio, si contribuirà a preservare l'ambiente e a salvaguardare la
salute umana.
D-Link e l'ambiente
D-Link cerca da sempre di ridurre l'impatto ambientale dei propri stabilimenti e dei propri prodotti. Allo scopo di ridurre al minimo tale impatto,
D-Link progetta e realizza i propri prodotti in modo che rispettino il più possibile l'ambiente, utilizzando materiali riciclabili a basso tasso di
tossicità sia per i prodotti che per gli imballaggi.
D-Link raccomanda di spegnere sempre i prodotti D-Link o di scollegarne la spina quando non vengono utilizzati. In questo modo si contribuirà
a risparmiare energia e a ridurre le emissioni di anidride carbonica.
Per ulteriori informazioni sui prodotti e sugli imballaggi D-Link a ridotto impatto ambientale, visitate il sito all'indirizzo www.dlinkgreen.com.
NEDERLANDS NL
Dit symbool op het product of de verpakking betekent dat dit product volgens de plaatselijke wetgeving niet mag worden
weggegooid met het huishoudelijk afval, maar voor recyclage moeten worden ingeleverd. Zodra het product het einde van de
levensduur heeft bereikt, dient u het naar een inzamelpunt te brengen dat hiertoe werd aangeduid door uw plaatselijke autoriteiten,
sommige autoriteiten accepteren producten zonder dat u hiervoor dient te betalen. Door het product en de verpakking op deze
manier te recyclen helpt u het milieu en de gezondheid van de mens te beschermen.
D-Link en het milieu
Bij D-Link spannen we ons in om de impact van onze handelingen en producten op het milieu te beperken. Om deze impact te beperken,
ontwerpt en bouwt D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in
product en verpakking.
D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart
u energie en beperkt u de CO2-emissies.
Breng een bezoek aan www.dlinkgreen.com voor meer informatie over onze milieuverantwoorde producten en verpakkingen.
81D-Link DCS-5030L User Manual
Appendix B - Regulatory Information
POLSKI PL
Ten symbol umieszczony na produkcie lub opakowaniu oznacza, że zgodnie z miejscowym prawem i lokalnymi przepisami
niniejszego produktu nie wolno wyrzucać jak odpady czy śmieci z gospodarstwa domowego, lecz należy go poddać procesowi
recyklingu. Po zakończeniu użytkowania produktu, niektóre odpowiednie do tego celu podmioty przyjmą takie produkty
nieodpłatnie, dlatego prosimy dostarczyć go do punktu zbiórki wskazanego przez lokalne władze. Poprzez proces recyklingu i
dzięki takiemu postępowaniu z produktem oraz jego opakowaniem, pomogą Państwo chronić środowisko naturalne i dbać o
ludzkie zdrowie.
D-Link i środowisko
D-Link podchodzimy w sposób świadomy do ochrony otoczenia oraz jesteśmy zaangażowani w zmniejszanie wpływu naszych działań i produktów
na środowisko naturalne. W celu zminimalizowania takiego wpływu rma D-Link konstruuje i wytwarza swoje produkty w taki sposób, aby były
one jak najbardziej przyjazne środowisku, stosując do tych celów materiały nadające się do powtórnego wykorzystania, charakteryzujące się
małą toksycznością zarówno w przypadku samych produktów jak i opakowań.
Firma D-Link zaleca, aby Państwo zawsze prawidłowo wyłączali z użytku swoje produkty D-Link, gdy nie są one wykorzystywane. Postępując w
ten sposób pozwalają Państwo oszczędzać energię i zmniejszać emisje CO2.
Aby dowiedzieć się więcej na temat produktów i opakowań mających wpływ na środowisko prosimy zapoznać się ze stroną Internetową www.
dlinkgreen.com.
ČESKY CZ
Tento symbol na výrobku nebo jeho obalu znamená, že podle místně platných předpisů se výrobek nesmí vyhazovat do komunálního
odpadu, ale odeslat k recyklaci. Až výrobek doslouží, odneste jej prosím na sběrné místo určené místními úřady k tomuto účelu.
Některá sběrná místa přijímají výrobky zdarma. Recyklací výrobku i obalu pomáháte chránit životní prostředí i lidské zdraví.
D-Link a životní prostředí
Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své
výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.
Společnost D-Link doporučuje, abyste své výrobky značky D-Link vypnuli nebo vytáhli ze zásuvky vždy, když je nepoužíváte. Pomůžete tak šetřit
energii a snížit emise CO2.
Více informací o našich ekologických výrobcích a obalech najdete na adrese www.dlinkgreen.com.
82D-Link DCS-5030L User Manual
Appendix B - Regulatory Information
MAGYAR HU
Ez a szimbólum a terméken vagy a csomagoláson azt jelenti, hogy a helyi törvényeknek és szabályoknak megfelelően ez a termék
nem semmisíthető meg a háztartási hulladékkal együtt, hanem újrahasznosításra kell küldeni. Kérjük, hogy a termék élettartamának
elteltét követően vigye azt a helyi hatóság által kijelölt gyűjtőhelyre. A termékek egyes helyeken ingyen elhelyezhetők. A termék és
a csomagolás újrahasznosításával segíti védeni a környezetet és az emberek egészségét.
A D-Link és a környezet
A D-Linknél megértjük és elkötelezettek vagyunk a műveleteink és termékeink környezetre gyakorolt hatásainak csökkentésére. Az ezen
hatás csökkentése érdekében a D-Link a lehető leginkább környezetbarát termékeket tervez és gyárt azáltal, hogy újrahasznosítható, alacsony
károsanyag-tartalmú termékeket gyárt és csomagolásokat alkalmaz.
A D-Link azt javasolja, hogy mindig kapcsolja ki vagy húzza ki a D-Link termékeket a tápforrásból, ha nem használja azokat. Ezzel segít az energia
megtakarításában és a széndioxid kibocsátásának csökkentésében.
Környezetbarát termékeinkről és csomagolásainkról további információkat a www.dlinkgreen.com weboldalon tudhat meg.
NORSK NO
Dette symbolet på produktet eller forpakningen betyr at dette produktet ifølge lokale lover og forskrifter ikke skal kastes sammen
med husholdningsavfall, men leveres inn til gjenvinning. Vennligst ta det til et innsamlingssted anvist av lokale myndigheter når
det er kommet til slutten av levetiden. Noen steder aksepteres produkter uten avgift. Ved på denne måten å gjenvinne produktet
og forpakningen hjelper du å verne miljøet og beskytte folks helse.
D-Link og miljøet
Hos D-Link forstår vi oss på og er forpliktet til å minske innvirkningen som vår drift og våre produkter kan ha på miljøet. For å minimalisere denne
innvirkningen designer og lager D-Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav-toksiske materialer både i
produktene og forpakningen.
D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere
CO2-utslipp.
For mer informasjon angående våre miljøansvarlige produkter og forpakninger kan du gå til www.dlinkgreen.com.
83D-Link DCS-5030L User Manual
Appendix B - Regulatory Information
DANSK DK
Dette symbol på produktet eller emballagen betyder, at dette produkt i henhold til lokale love og regler ikke må bortskaes som
husholdningsaald, mens skal sendes til genbrug. Indlever produktet til et indsamlingssted som angivet af de lokale myndigheder,
når det er nået til slutningen af dets levetid. I nogle tilfælde vil produktet blive modtaget gratis. Ved at indlevere produktet og dets
emballage til genbrug på denne måde bidrager du til at beskytte miljøet og den menneskelige sundhed.
D-Link og miljøet
Hos D-Link forstår vi og bestræber os på at reducere enhver indvirkning, som vores aktiviteter og produkter kan have på miljøet. For at minimere
denne indvirkning designer og producerer D-Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer
med lavt giftighedsniveau i både produkter og emballage.
D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og
reducere CO2-udledningerne.
Du kan nde ere oplysninger om vores miljømæssigt ansvarlige produkter og emballage på www.dlinkgreen.com.
SUOMI FI
Tämä symboli tuotteen pakkauksessa tarkoittaa, että paikallisten lakien ja säännösten mukaisesti tätä tuotetta ei pidä hävittää
yleisen kotitalousjätteen seassa vaan se tulee toimittaa kierrätettäväksi. Kun tuote on elinkaarensa päässä, toimita se lähimpään
viranomaisten hyväksymään kierrätyspisteeseen. Kierrättämällä käytetyn tuotteen ja sen pakkauksen autat tukemaan sekä ympäristön
että ihmisten terveyttä ja hyvinvointia.
D-Link ja ympäristö
D-Link ymmärtää ympäristönsuojelun tärkeyden ja on sitoutunut vähentämään tuotteistaan ja niiden valmistuksesta ympäristölle mahdollisesti
aiheutuvia haittavaikutuksia. Nämä negatiiviset vaikutukset minimoidakseen D-Link suunnittelee ja valmistaa tuotteensa mahdollisimman
ympäristöystävällisiksi käyttämällä kierrätettäviä, alhaisia pitoisuuksia haitallisia aineita sisältäviä materiaaleja sekä tuotteissaan että niiden
pakkauksissa.
Suosittelemme, että irrotat D-Link-tuotteesi virtalähteestä tai sammutat ne aina, kun ne eivät ole käytössä. Toimimalla näin autat säästämään
energiaa ja vähentämään hiilidioksiidipäästöjä.
Lue lisää ympäristöystävällisistä D-Link-tuotteista ja pakkauksistamme osoitteesta www.dlinkgreen.com.
84D-Link DCS-5030L User Manual
Appendix B - Regulatory Information
SVENSKA SE
Den här symbolen på produkten eller förpackningen betyder att produkten enligt lokala lagar och föreskrifter inte skall kastas i
hushållssoporna utan i stället återvinnas. Ta den vid slutet av dess livslängd till en av din lokala myndighet utsedd uppsamlingsplats,
vissa accepterar produkter utan kostnad. Genom att på detta sätt återvinna produkten och förpackningen hjälper du till att bevara
miljön och skydda människors hälsa.
D-Link och miljön
På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och produkter kan ha på miljön. För att minska denna påverkan
utformar och bygger D-Link sina produkter för att de ska vara så miljövänliga som möjligt, genom att använda återvinningsbara material med
låg gifthalt i både produkter och förpackningar.
D-Link rekommenderar att du alltid stänger av eller kopplar ur dina D-Link produkter när du inte använder dem. Genom att göra detta hjälper
du till att spara energi och minska utsläpp av koldioxid.
För mer information om våra miljöansvariga produkter och förpackningar www.dlinkgreen.com.
PORTUGUÊS PT
Este símbolo no produto ou embalagem signica que, de acordo com as leis e regulamentações locais, este produto não deverá ser
eliminado juntamente com o lixo doméstico mas enviado para a reciclagem. Transporte-o para um ponto de recolha designado pelas
suas autoridades locais quando este tiver atingido o m da sua vida útil, alguns destes pontos aceitam produtos gratuitamente. Ao
reciclar o produto e respectiva embalagem desta forma, ajuda a preservar o ambiente e protege a saúde humana.
A D-Link e o ambiente
Na D-Link compreendemos e comprometemo-nos com a redução do impacto que as nossas operações e produtos possam ter no ambiente.
Para minimizar este impacto a D-Link concebe e constrói os seus produtos para que estes sejam o mais inofensivos para o ambiente possível,
utilizando meteriais recicláveis e não tóxicos tanto nos produtos como nas embalagens.
A D-Link recomenda que desligue os seus produtos D-Link quando estes não se encontrarem em utilização. Com esta acção ajudará a poupar
energia e reduzir as emissões de CO2.
Para saber mais sobre os nossos produtos e embalagens responsáveis a nível ambiental visite www.dlinkgreen.com.