Table of Contents
D-Link DCS-700L User Manual
Displayed below is the user manual for DCS-700L by D-Link which is a product in the Video Baby Monitors category. This manual has pages.
User Guide
Wi-Fi Baby Monitor
Day / Night Cloud Camera
Version 1.0 | 9/24/14
DCS-700L
2D-Link DCS-700L User Manual
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization
of such revisions or changes. Information in this document may become obsolete as our services and websites develop and change. Please refer to
the www.mydlink.com website for the most current information.
Manual Revisions
Revision Date Description
1.0 September 24, 2014 • Initial release
Trademarks
© 2014 D-Link. All Rights Reserved. D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries. All
other third-party marks mentioned herein may be trademarks of their respective owners. This publication may not be reproduced, in whole or in part,
without prior express written permission from D-Link Systems, Inc.
Preface
3D-Link DCS-700L User Manual
Table of Contents
Preface .............................................................................................. 2
Manual Revisions .................................................................. 2
Trademarks.............................................................................. 2
Product Overview ......................................................................... 4
Package Contents .................................................................4
System Requirements ......................................................... 5
Introduction ............................................................................ 6
Important Safety Information .......................................... 7
Hardware Overview ............................................................. 9
Front View ............................................................................ 9
Rear View ...........................................................................10
Installation ....................................................................................11
Wireless Installation Considerations ............................11
Camera Setup ....................................................................... 12
Mounting the Camera .......................................................13
Download the mydlink Baby App .................................14
Set Up a New Camera with the mydlink Baby App 18
Monitoring ....................................................................................19
mydlink Baby App Home Screen ..................................19
mydlink Baby App Live View ........................................... 20
Conguration ...............................................................................21
mydlink Baby App Conguration .................................21
mydlink Baby App Settings .............................................24
Video Recording and Playback ..............................................25
Taking Snapshots or Recording Videos ......................25
Viewing Snapshots or Playing Videos .........................26
Creating a mydlink Account ...................................................27
Advanced Features ....................................................................28
Enabling Direct Connect ..................................................28
Troubleshooting .........................................................................30
Technical Specications ...........................................................33
Contacting Technical Support ...............................................35
Warranty ........................................................................................36
Registration ..................................................................................43
4D-Link DCS-700L User Manual
Section 1: Product Overview
Product Overview
Package Contents
If any of the above items are missing, please contact your reseller.
DCS-700L Wi-Fi Baby Monitor
Wall Mount Kit
Power adapter
Additional Accent Ring
Quick Install Guide
5D-Link DCS-700L User Manual
Section 1: Product Overview
Minimum Requirements
Mobile Requirements • For mobile requirements refer to the Compatibility List on mydlink Baby app page on the
App Store and Google Play
Computer Requirements
• Computer with 1.3GHz processor or above and at least 128 MB RAM
• Microsoft Windows® 8, 7, Vista®, or Mac OS® X (10.6 or higher)
• Internet Explorer® 7, Firefox® 12, Safari® 6, or Chrome™ 20 or higher with Java installed and enabled
Network Requirements • 802.11g/n Wi-Fi network
(Wireless N network recommended for optimal performance)
Remote Viewing Requirements* • Internet access required for remote viewing
mydlink Requirements • For mydlink requirements refer to:
http://www.mydlink.com
*Note: Direct Connection requires no Internet connection and no router. Refer to "Advanced Features" on page 28.
6D-Link DCS-700L User Manual
Section 1: Product Overview
Introduction
Keep an eye on your little one with the DCS-700L Wi-Fi Baby Monitor. This portable camera transforms your mobile device into a versatile, yet easy-to-use baby
monitor. Connect to the camera wirelessly at home, or through the Internet when you are at work, so you can check on your infant no matter where you are. You
can even take the DCS-700L with you when you travel with your baby. All you need is a mobile device to connect directly to the Wi-Fi Baby Monitor.
The DCS-700L is packed with features including motion detection, sound detection, and night vision. It will take snapshots, record videos, and can even play
gentle lullabies to help ease your baby to sleep!
7D-Link DCS-700L User Manual
Section 1: Product Overview
Important Safety Information
The DCS-700L is designed to meet the highest safety standards. Please make sure that it is set up and used correctly. It is very important that you follow the
safety guidelines below:
Make sure the DCS-700L and cord are out of baby’s reach. In general,
this means the Wi-Fi Baby Monitor and cord should be placed at least
three feet away from baby’s crib.
Use caution if you wall-mount the DCS-700L. Be careful not to allow
the Wi-Fi Baby Monitor cord to dangle between the crib and a wall. You
should use the three foot minimum spacing between baby and the cord
in this case, too.
Watch out for other cord hazards. While you’re securing the Wi-Fi Baby
Monitor cord, take a moment to look around for any other strangulation
hazards as well. One common culprit is window blind cords that are within
baby’s reach. Cords for other electronics and nursery decor with ribbons
or decorative cords may also be a risk.
Don’t place the DCS-700L on the crib rail. Even if you think your baby
would not touch the Wi-Fi Baby Monitor, it’s too risky to leave it within
easy reach of your baby. Even camera cords that are secured to the rail
could be yanked or twisted by a curious child.
Mounting the DCS-700L on tabletops. Place the Wi-Fi Baby Monitor on
a tabletop no less than three feet away from your baby’s crib. Feed the
power cord down the back of the table or use wall clips to secure the cord
away so your baby cannot reach the cord. Plug in the power cord, check
your smartphone or tablet to ensure that you are getting a good view of
your child and that there are no obstructions.
As your baby reaches toddlerhood, you should re-evaluate placement
of the DCS-700L When little arms get longer and toddlers learn to climb
and reach for things, you may need to move the Wi-Fi Baby Monitor to
prevent access to the cord.
You can use the DCS-700L in other places besides the nursery, if it's
indoors. When considering alternative locations, avoid placement where
the camera may come in contact with water. Don’t forget to also check to
make sure you can place the Wi-Fi Baby Monitor out of baby’s reach.
Do not place the DCS-700L close to water or heat. Don't use the Wi-Fi
Baby Monitor near bathtubs, showers, or sinks. Keep the camera away
from heat sources such as stoves, radiators, etc.
Strangulation Hazard: Keep the DCS-700L and any attached cords at least three feet out of reach of any children or babies.
Make sure you keep any attached cords out of your baby’s crib or child's sleeping area.
8D-Link DCS-700L User Manual
Section 1: Product Overview
Make sure there is proper ventilation around the DCS-700L. Make sure
you do not place the Wi-Fi Baby Monitor on sofas, cushions, beds, etc. in a
way that may block ventilation. DO NOT cover the camera with a blanket.
Remember the DCS-700L is not a toy. Do not allow babies or children to
play with the Wi-Fi Baby Monitor. You should never attempt to open or
disassemble the camera.
Most Important: Remember that the DCS-700L is not a babysitter. The Wi-Fi Baby Monitor should only be used as a parenting aid for monitoring your
baby or child. While it does give you the ability to remotely view your baby or child, there should always be an adult in the same house. The Wi-Fi Baby
Monitor should not be considered a replacement for responsible adult supervision. In addition to monitoring your baby or child with the Wi-Fi Baby
Monitor, make sure you check on your child or baby regularly.
How to Ensure your DCS-700L is Secure
The rst step is to make sure you turn on security features during the installation process. Follow the instructions, and make sure you set up
a strong password at least eight characters long, with a mix of symbols and upper and lower case letters. Make sure you keep the Wi-Fi Baby
Monitor software and mydlink Baby app up-to-date.
How to Clean Your DCS-700L
Clean the camera with a dry cloth only; never allow the camera to get wet.
9D-Link DCS-700L User Manual
Section 1: Product Overview
Front View
Hardware Overview
1 Night Vision Light (IR) Infrared light illuminates the camera's eld of view at night.
2 Camera Lens Allows you to record or view video of the surrounding area.
3 Light Sensor Sensor for ambient (surrounding) light.
4 Front Accent Ring Decorative switchable front accent ring (in blue or pink).
5 Microphone Allows you to record or listen to audio from the surrounding area.
6 Camera Base Camera base for placement on a desktop or wall mounting.
1
6
25
3
4
10D-Link DCS-700L User Manual
Section 1: Product Overview
Rear View
1 Cloud/Direct Mode LED A solid blue light indicates a connection to the mydlink server. A blinking blue light means Direct Connect is enabled.
2 Direct Connect Button Press the button to allow direct connection from your mobile device to your DCS-700L wirelessly.
3 Micro USB Power Port Micro USB connector for the supplied power adapter or USB battery pack*.
4 Speaker Allows you to talk to your baby and to play lullabies.
5 Power LED A solid red light indicates the camera is powered on or has been reset to the factory default settings.
6 Reset Button Press and hold the recessed button with a paper clip for 10 seconds to reset the camera to factory default settings.
5
*Note: USB battery not included. Only the 5V /2A battery pack is supported.
1
2
4
3
6
11D-Link DCS-700L User Manual
Section 2: Installation
This D-Link camera can connect to your wireless network from anywhere within the operating range of your wireless network. However, the
number, thickness, and location of walls, ceilings, or other objects that the wireless signals must pass through may limit the range. Typical ranges
vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless
range is to follow these basic guidelines:
1. Minimize the number of walls and ceilings between your camera and other network devices - each wall or ceiling can reduce your camera’s
range from 3-90 feet (1-30 meters).
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet
(1 meter) thick. At a 2-degree angle, it looks over 42 feet (14 meters) thick. Position your devices so that the signal will travel straight through
a wall or ceiling (instead of at an angle) for better reception.
3. Building Materials make a dierence. A solid metal door or aluminum studs may weaken the wireless signal. Try to position your access points,
wireless routers, and other networking devices where the signal passes through drywall or open doorways. Materials and objects such as
glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your camera at least 3-6 feet or 1-2 meters away from electrical devices or appliances that generate RF noise.
5. If you are using 2.4GHz cordless phones or other radio frequency sources (such as microwave ovens), your wireless connection may degrade
dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits
a signal even if the phone is not in use.
Installation
Wireless Installation Considerations
12D-Link DCS-700L User Manual
Section 2: Installation
There are several ways to set up your DCS-700L:
Camera Setup
2. Remotely...
Connect to your DCS-700L using the Internet.
Connect to your DCS-700L through your home wireless network.
1. At Home...
Note: You can also connect directly to your DCS-700L wirelessly, so there is no need for an Internet connection or a router.
Refer to "Advanced Features" on page 28 for details.
13D-Link DCS-700L User Manual
Section 2: Installation
Mounting the Camera
1. Use a 6mm drill bit to drill two holes that are 36mm apart, and at least 30mm deep.
4. Make sure the camera is positioned so that the D-Link logo is at the bottom of the base.
Adjust the angle of the camera as desired.
2. Use a mallet to insert the wall anchors into the holes. Screw the included screws into the
wall anchors.
3. Place the mounting holes on the base of the camera over the screws as shown, then slide
the camera down to mount the camera.
Refer to the steps below for mounting the camera. The DCS-700L is for indoor use only. Do not mount it in a location where it may be in contact
with water as this may damage the product and/or cause injury.
We suggest you congure the camera before mounting it.
2
4
WARNING - STRANGULATION HAZARD
Children have STRANGLED in cords. Keep adapter cord out of reach of children (minimum of three feet away). NEVER place the camera or adapter cord inside
the crib or child's sleeping area. Do not use extension cords. This product is NOT intended to replace proper adult supervision of children.
36mm
30mm
1
36mm
30mm
3
FCC ID: KA2CS825LA1
IC: 4216A-CS825LA1
CAN ICES-3 (B)/NMB-3(B)
Model: DCS-820LA1
DCS-820L
14D-Link DCS-700L User Manual
Section 2: Installation
Download the mydlink Baby App
mydlink Baby Camera Monitor (Free)
Search for mydlink Baby in the App Store or Google Play. You can download and install the app on your smartphone or tablet
when connected to the Internet. Instructions for installing the app begin on the next page.
System Requirements: Refer to mydlink Baby app page on the App StoreSM and Google Play™.
You can also nd the mydlink Baby app by scanning the QR code above with a QR code reader. Install the app and skip to
"Set Up a New Camera with the mydlink Baby App" on page 18.
Note: If you experience issues registering this device with your mydlink account, or If you purchased an open box or resold unit, perform
a hard reset by pressing and holding the reset button on the device for 10 seconds while the device is powered on. If you are returning
the device to the place of purchase, please perform the hard reset procedure to clear the device of any personal data.
15D-Link DCS-700L User Manual
Section 2: Installation
For an iOS device, tap on the App Store icon.
1
For an Android device, tap on Play Store.
16D-Link DCS-700L User Manual
Section 2: Installation
2Search for mydlink baby within the search eld.
Similar search for mydlink baby for Android.
17D-Link DCS-700L User Manual
Section 2: Installation
For Android, tap on Install to install the app.
For an iOS device, tap on the (+) icon to install the mydlink
Baby app.
3
18D-Link DCS-700L User Manual
Section 2: Installation
Set Up a New Camera with the mydlink Baby App
Once the mydlink Baby app is installed, simply tap on the icon
to open the app. The next screen you see is the Setup Wizard.
Tap Setup to launch the Setup Wizard and congure your camera.
The wizard will guide you through the process of connecting
your camera to your home Wi-Fi network and creating your
mydlink account.
If you need help during the setup process, tap on the yellow (!)
symbol. Helpful hints will appear on the screen.
Note: Although the main screens that follow are for an iOS device, instructions for an Android device are very similar.
Note: If you experience issues registering this device with your
mydlink account, perform a hard reset by pressing and holding
the reset button on the device for 10 seconds while the device is
powered on.
19D-Link DCS-700L User Manual
Section 3: Monitoring
Monitoring
mydlink Baby App Home Screen
Once the setup process is complete, you will see the mydlink Baby app Home Screen.
1 DCS-700L Tap the camera view snapshot to go to the Live View screen. Refer to "mydlink Baby App Live View" on page 20.
2 Local/Remote Access Tap on the Home icon to switch from local access to remote access to your DCS-700L.
After you change to remote access, you will see the Login screen*.
3 ! Tap on the Exclamation Point (!) icon for helpful hints.
4 Refresh Tap on the Refresh icon to scan for Wi-Fi Baby Monitors on your network that have not yet been added to the app.
5Camera Setup Wizard Tap on Camera + icon to set up an additional DCS-700L.
6 ? Tap on the Question Mark (?) icon for FAQs (frequently asked questions).
7 Alert Icons
When sound or motion is initially detected, the corresponding alert icon changes color and a number appears.
As additional sounds and/or motions are detected, the number increases.
To reset alerts, tap on the alert icon.
1
4
6
5
7
*Note: When you log in, the refresh icon will change, allowing you to access the control for push notication. Refer to question 11 of "Troubleshooting" on page 30.
2
3
20D-Link DCS-700L User Manual
Section 3: Monitoring
mydlink Baby App Live View
At any time, tap on the Live View screen to return to
the Home screen, and to access both the Settings and
Conguration menus.
1 Return Tap on the Return icon to return to the Home screen.
2 Wi-Fi Status Indicates the type of connection to the Wi-Fi Baby Monitor. (Blue = local, pink = mydlink remote, green = direct connect, and grey = disconnected.)
3 Microphone Tap on the Microphone icon to enable or disable two-way audio.
4 Camera Tap on the Camera icon to access snapshot and video recording mode.
5 Alerts Tap on the Alerts icon ( ! ) to enable or disable alert notication.
6 Music Tap on the Music icon to select from the ve available lullabies to play on your camera's speaker. Also is used to enable or disable the music.
7 Speaker Tap on the Speaker icon to enable or disable Live View audio. Volume can be controlled by using the volume buttons on the mobile device.
8 Sound Alert Indicates when a loud sound is detected, like the sound of a baby crying.
9 Motion Alert Indicates when motion is detected, like when the baby is moving.
10 Settings Tap the Settings Icon ( ) to access settings, such as the camera's video resolution, brightness or speaker volume.
11 Conguration Tap the Conguration icon ( ) to access the conguration menu.
111
10
456789
3
Note: The rst time you access your DCS-700L Live View,
you will get a reminder to adjust the focus on the camera.
This will ensure you get the best possible image. You only
need to do this once, and then you can turn o the reminder.
2
21D-Link DCS-700L User Manual
Section 4: Conguration
At any time after you complete the Setup Wizard, you may tap on the Live View screen to access the Conguration menu. The conguration icon is in the upper
right corner of the screen.
Tap to access Camera Information
Tap to access the Wireless screen
Tap to access the Events screen
Tap to access the Lullaby screen
Change the camera’s day/night mode to Auto,
All Day, or All Night
Enable background audio to play live sound
when mydlink Baby app is minimized, or
when your mobile device is in standby mode
Change or turn o alert sound
Conguration
mydlink Baby App Conguration
22D-Link DCS-700L User Manual
Section 4: Conguration
• Under Wireless…
See which wireless network your
camera is currently connected to
Change the wireless network you
want your camera to connect to
• Under Camera Information…
Change your Camera Password
Sync your camera’s time and date to
your mobile device
Remove camera
from the app's
local access list
Change your Camera Name
23D-Link DCS-700L User Manual
Section 4: Conguration
• Under Lullaby…
Select how long the lullaby will play (in minutes)
when activated
• Under Events…
Check the ambient sound level. This level
number will change depending on how noisy
the background is
Change the Sound Detection level. Set the
Sound Detection Level higher than the Current
Level to receive alerts when noise exceeds the
current level. You can put the Detection Level
at the highest setting to disable sound alerts
- a higher detection level means less noise is
required to trigger an event
Change the motion detection sensitivity. You
can also put sensitivity at the lowest setting in
order to disable motion alerts
24D-Link DCS-700L User Manual
Section 4: Conguration
mydlink Baby App Settings
Change the Speaker Volume on your camera
for two-way audio communication and lullabies
Adjust the Brightness of the Live View image
Tap this icon to open the settings menu
25D-Link DCS-700L User Manual
Section 5: Video Recording and Playback
Tap the Camera icon to take a snapshot in snapshot mode. The camera button changes to a round button when the
DCS-700L is in video recording mode. (A red button will replace the black button when the camera is recording video.)
Tap Done when you are nished taking snapshots or recording
video to return to Live View
Tap the Playback icon to view snapshots or play videos from your mobile device (Refer to instructions on the next page)
Tap to toggle between taking snapshots and recording videos
Video Recording and Playback
Taking Snapshots or Recording Videos
Tapping on the Camera icon at the bottom of the Live View screen will allow you to access the recording mode
When you take snapshots or record videos, the images and videos are stored directly to your smartphone or tablet. You can access snapshots or recorded videos in the
mobile device's photo library.
26D-Link DCS-700L User Manual
Section 5: Video Recording and Playback
Viewing Snapshots or Playing Videos
You can see your pictures or watch your videos at any time from your mobile device*. Never miss a precious moment again!
* Requires iPhone, iPad, iPod Touch, or Android device with Internet access.
Tap the Playback icon in the lower left corner of the screen, and the device selection window will appear.
Tap the Playback icon to view shapshots or play videos
Select the Mobile Device icon, and tap Continue to either view snapshots or play videos on your mobile device.
Note: Only the mobile device option is available for the DCS-700L.
27D-Link DCS-700L User Manual
Section 6: mydlink
During the setup process, the Setup Wizard gives you the opportunity to create a mydlink account. When you set up an account with mydlink, it gives you the
ability to securely monitor your baby or child when you are away from home, absolutely free and without a monthly subscription fee.
If you initially decide not to take advantage of this free service but change your
mind later, you can create your mydlink account by tapping Join mydlink from the
mydlink Baby app Home Screen.
For more information, go to http://mydlink.com
Creating a mydlink Account
28D-Link DCS-700L User Manual
Section 7: Advanced Features
Advanced Features
Enabling Direct Connect
1Press and hold the Direct Connect button on the back of the camera for
at least ve seconds. The Cloud LED will start blinking blue, indicating
the Direct Connect mode is enabled.
2Connect your mobile device to the myBabyCam-xxxx Wi-Fi network. (XXXX
is a 4-digit code, the last 4 digits of your camera’s MAC address.) Use the
Wi-Fi password you created during the Setup Wizard installation process.
During the initial steps with the Setup Wizard, you congured the camera to connect to your home Wi-Fi network. If you want to take your camera
with you, it's not a problem with the DCS-700L.* You can connect directly to your camera, which means there is no need for an Internet connection
or a router. Follow the steps below to enable Direct Connect.
Note: Once you are connected to the camera, you will no longer have Internet
access.
*You have the option of using a portable USB battery pack (not included) that supplies 5V/2A of power when you take the camera with you. Plug
the USB battery pack into the Micro USB power port. The Power LED on the bottom of the camera will turn red when the camera is powered on.
Direct Connect
29D-Link DCS-700L User Manual
Section 7: Advanced Features
3Open the mydlink Baby app. To connect, tap the Reconnect button
for the camera.
Note: When you nish using Direct Connect, press and hold the Direct Connect button on the back of the camera for at least ve seconds to turn o
Direct Connect mode. This will ensure that your mobile device will return to normal operation with Internet access, and you should have no problem
connecting the DCS-700L to your Wi-Fi network when you return home.
30D-Link DCS-700L User Manual
Section 8: Troubleshooting
Troubleshooting
2. How do I change the accent ring?
Rotate the accent ring counter clockwise, then lift it o. Place the new ring on and rotate it clockwise until it clicks into place.
3. How do I select a dierent lullaby?
Use the mydlink Baby app to change the lullaby. Tap on the music icon on the camera’s Live View screen. Select a lullaby from the list or select Play
All. (Refer to "mydlink Baby App Conguration" on page 21.)
4. I started the mydlink Baby app, but I can’t nd my camera.
• Make sure your camera is turned on and receiving power.
• If you have set up your camera before, make sure your smartphone or tablet is connected to the same router as your camera.
• If you are setting up a new camera, make sure your smartphone or tablet is connected to the camera’s Wi-Fi network (not to your wireless router).
This also applies when you enable Direct Connect to use the camera away from home. (Refer to "Advanced Features" on page 28.)
• The Wi-Fi network name should be [myBabyCam-XXXX], where XXXX is a 4-digit code (the last four digits of your camera’s MAC address).
• The Wi-Fi password is printed on a label on the bottom of your camera.
• You can also nd your camera's Wi-Fi network details on a label attached to the the back of the Quick Install Guide.
• If you still can’t nd your camera, reset your camera by pressing its reset button for 10 seconds (while it is powered on).
5. Why do I see a white haze when viewing Live Video in night vision mode?
The night vision light on the camera may be reecting o a nearby surface. Try repositioning and aiming the camera.
6. What does it mean when the Power LED is red?
When you power on the camera, the Power LED will be solid red. Also, when you reset the camera, the Power LED will be red.
7. How can you power the camera?
The camera can be powered with the provided power adapter, or you can use an external USB battery for total portability. (USB battery is not
included. Requires 5V/2A output.)
Reset
1. What can I do if I forget my password?
If you forget your password, you must reset the camera. Unfortunately, this will change your settings back to the
factory default settings. To reset your camera, use an unfolded paper clip to press and hold the Reset button
for about 10 seconds while your camera is powered on.
31D-Link DCS-700L User Manual
Section 8: Troubleshooting
9. Should the app be running constantly on my device?
The app can run in the background, allowing you to hear your baby continuously, even when the phone is locked. The smartphone or tablet can
still be used normally while the app is running. If you do not want to hear audio from the camera when the app is open, you can turn o the
Background audio on the Conguration menu. If you close the app, the camera audio will be turned o.
10. How do I adjust the sensitivity of motion and audio detection?
From the Live View page, tap on the screen to reveal the icons, and tap the Conguration icon ( ) to go to the Conguration menu. Tap the
Events arrow to access the motion and audio detection settings.
8. How do I access the camera remotely?
Set up a new mydlink account and/or register your camera with mydlink during the initial setup. Once
the process is complete, you can access the login screen for your mydlink account from the Home page
by sliding the Home icon switch to the right. Enter the E-mail address and Password for your mydlink
account and press Log in.
You will be able to monitor your baby from anywhere, as long as your smartphone or tablet is connected
to the Internet (over Wi-Fi or over a cellular network).
Note: If you do not enable mydlink, you will only be able to view the camera within your home's wireless
coverage area.
32D-Link DCS-700L User Manual
Section 8: Troubleshooting
11. How do I activate the push notication?
A. Go to the Home page and slide the Home icon to switch to the right for remote access.
B. After logging in, you will notice that the refresh icon
on the top right has changed to an alarm clock icon.
C. Tap on the Alarm Clock icon, and you will see the Push Notication setting. Tap on the Switch icon to activate push notications. The switch
icon will turn green, and you should begin to receive alerts as specied.
Note: If you do not receive alerts, go to the Conguration menu and adjust the sensitivity level of sound and motion detection as described on the
previous page, question 10.
33D-Link DCS-700L User Manual
Appendix A: Technical Specications
Technical Specications
CAMERA HARDWARE PROFILE
• 1/5" VGA CMOS Sensor
• 16 ft. IR Illumination Distance
• Minimum Illumination: 0 lux when IR LED On
• ICR Filter
• Built-in Microphone and Speaker
• Digital Zoom
• Focal Length: 2.44 mm
• Aperture: F2.4
• Angle of View:
• (H) 57°
• (V) 42°
• (D) 68°
IMAGE FEATURES
• Adjustable Image Size
• Time Stamp Overlay
NETWORK PROTOCOLS
• IPv4
• ARP
• TCP/IP
• UDP
• ICMP
• DHCP Client
• NTP Client (D-Link)
• DNS Client
• DDNS Client (D-Link)
• HTTP
• HTTPS (for conguration)
• UPnP Port Forwarding
EXTERNAL DEVICE INTERFACES
• IEEE 802.11n Wireless
• Reset Button
• Power Port (Micro USB1)
REMOTE MANAGEMENT
• Take Snapshots and Video Clips and Save Directly to Your Smartphone or Tablet
• Connect to Your DCS-700L via Web Browser
• Connect Directly to the DCS-700L with Your Mobile Device
EVENT MANAGEMENT
• Motion Detection
• Sound Detection
MOBILE SUPPORT
• mydlink Baby App for iOS and Android Mobile Devices is Available on the App
Store and Google Play
VIDEO COMPRESSION
• MJPEG Format Video Compression
• JPEG for Still Images
VIDEO RESOLUTION
• 640 x 480, 320 x 240
WEIGHT
• 3.8 oz (108.2 g)
OPERATING TEMPERATURE
• 32° to 104°F (0° to 40°C)
STORAGE TEMPERATURE
• - 4° to 158°F (-20° to 70°C)
OPERATING HUMIDITY
• 20% - 80% non-condensing
DIMENSIONS
• 2.8 x 3.0 x 3.9 in (70 x 75 x 100 mm)
1 USB battery not included, requires at least 2 A output
34D-Link DCS-700L User Manual
Appendix A: Technical Specications
EXTERNAL POWER ADAPTER
• Input 100-240VAC, 50/60Hz (Micro USB type)
• Output 5VDC, 1.2A
POWER CONSUMPTION
• Max. 4.4 W
CERTIFICATIONS
• CE
• CE LVD
• FCC
• IC
• C-Tick
• Photobiological Safety
35D-Link DCS-700L User Manual
Appendix B: Contacting Technical Support
Contacting Technical Support
U.S. and Canadian customers can contact D-Link technical support through our web site or by phone.
Before you contact technical support, please have the following ready:
• Model number of the product (e.g. DCS-700L)
• Hardware Revision (located on the camera (e.g. rev A1))
• Serial Number (s/n number located on the camera).
You can nd software updates and user documentation on the D-Link website as well as frequently asked questions and
answers to technical issues.
For customers within the United States:
Phone Support:
(877) 453-5465
Internet Support:
http://support.dlink.com
For customers within Canada:
Phone Support:
(866) 354-6599
Internet Support:
http://support.dlink.ca
36D-Link DCS-700L User Manual
Appendix C: Warranty
Warranty
Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty:
• Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and
• Only for products purchased and delivered within the fty states of the United States, the District of Columbia, U.S. Possessions
or Protectorates, U.S. Military Installations, or addresses with an APO or FPO.
Limited Warranty:
D-Link warrants that the hardware portion of the D-Link product described below (“Hardware”) will be free from material defects in workmanship
and materials under normal use from the date of original retail purchase of the product, for the period set forth below (“Warranty Period”), except
as otherwise stated herein.
• Hardware (excluding power supplies and fans): One (1) year
• Power supplies and fans: One (1) year
• Spare parts and spare kits: Ninety (90) days
The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at
D-Link’s option, to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund the actual
purchase price paid. Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Oce. The replacement hardware
need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any
reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
Repaired or replacement hardware will be warranted for the remainder of the original Warranty Period or ninety (90) days, whichever is longer,
and is subject to the same limitations and exclusions. If a material defect is incapable of correction, or if D-Link determines that it is not practical
to repair or replace the defective Hardware, the actual price paid by the original purchaser for the defective Hardware will be refunded by D-Link
upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded,
shall become the property of D-Link upon replacement or refund.
37D-Link DCS-700L User Manual
Appendix C: Warranty
Limited Software Warranty:
D-Link warrants that the software portion of the product (“Software”) will substantially conform to D-Link’s then current functional specications
for the Software, as set forth in the applicable documentation, from the date of original retail purchase of the Software for a period of ninety (90)
days (“Software Warranty Period”), provided that the Software is properly installed on approved hardware and operated as contemplated in its
documentation. D-Link further warrants that, during the Software Warranty Period, the magnetic media on which D-Link delivers the Software will be
free of physical defects. The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will
be, at D-Link’s option, to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link’s functional
specications for the Software or to refund the portion of the actual purchase price paid that is attributable to the Software. Except as otherwise
agreed by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the
license granted by D-Link for the Software. Replacement Software will be warranted for the remainder of the original Warranty Period and is subject
to the same limitations and exclusions. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion that it
is not practical to replace the non-conforming Software, the price paid by the original licensee for the non-conforming Software will be refunded by
D-Link; provided that the non-conforming Software (and all copies thereof) is rst returned to D-Link. The license granted respecting any Software
for which a refund is given automatically terminates.
Non-Applicability of Warranty:
The Limited Warranty provided hereunder for Hardware and Software portions of D-Link’s products will not be applied to and does not cover any
refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the sellers, or
the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being sold “As-Is” without any
warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything stated herein to the contrary.
Submitting A Claim (USA):
The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and
the product is within warranty, the customer shall submit a claim to D-Link as outlined below:
• The customer must submit with the product as part of the claim a written description of the Hardware defect or Software
nonconformance in sucient detail to allow D-Link to conrm the same, along with proof of purchase of the product (such as a
copy of the dated purchase invoice for the product) if the product is not registered.
• The customer must obtain a Case ID Number from D-Link Technical Support at https://support.dlink.com, who will attempt to
assist the customer in resolving any suspected defects with the product. If the product is considered defective, the customer must
obtain a Return Material Authorization (“RMA”) number by completing the RMA form and entering the assigned Case ID Number
at http://rma.dlink.com/.
• After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package
to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package.
Please refer to shipping and packaging instructions located online at http://rma.dlink.com.
38D-Link DCS-700L User Manual
Appendix C: Warranty
• The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products sent COD
will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer and shipped
to D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages
that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common
carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in the United States, otherwise
we will ship the product to you freight collect. Expedited shipping is available upon request and provided shipping charges are
prepaid by the customer.
D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an
RMA number is not visible from the outside of the package. The product owner agrees to pay D-Link’s reasonable handling and return shipping
charges for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to
be defective or non-conforming.
Submitting A Claim (Canada):
The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and
the product is within warranty, the customer shall submit a claim to D-Link as outlined below:
• Customers need to provide their receipt (proof of purchase) even if the product is registered. Without a receipt, no warranty service will
be done. The registration is not considered a proof of purchase.
• The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance
in sucient detail to allow D-Link to conrm the same, along with proof of purchase of the product (such as a copy of the dated purchase
invoice for the product) if the product is not registered.
• The customer must obtain a Case ID Number from D-Link Technical Support at 1-800-361-5265, who will attempt to assist the customer
in resolving any suspected defects with the product. If the product is considered defective, the customer must obtain a Return Material
Authorization (“RMA”) number by completing the RMA form and entering the assigned Case ID Number at https://rma.dlink.ca/.
• After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to
ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not
include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product and will not ship
back any accessories.
• The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products sent COD will
be rejected by D-Link. Products shall be fully insured by the customer and shipped to D-Link Networks, Inc., 2525 Meadowvale Boulevard
Mississauga, Ontario, L5N 5S2 Canada. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired
39D-Link DCS-700L User Manual
Appendix C: Warranty
or replaced packages will be shipped to the customer via Purolator Canada or any common carrier selected by D-Link. Return shipping
charges shall be prepaid by D-Link if you use an address in Canada, otherwise we will ship the product to you freight collect. Expedited
shipping is available upon request and provided shipping charges are prepaid by the customer. D-Link may reject or return any product
that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from
the outside of the package. The product owner agrees to pay D-Link’s reasonable handling and return shipping charges for any product
that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective or
non-conforming.
• RMA phone number: 1-800-361-5265 Hours of Operation: Monday-Friday, 9:00AM – 9:00PM EST
What Is Not Covered:
The Limited Warranty provided herein by D-Link does not cover: Products that, in D-Link’s judgment, have been subjected to abuse, accident, alteration,
modication, tampering, negligence, misuse, faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in the
documentation for the product, or if the model or serial number has been altered, tampered with, defaced or removed; Initial installation, installation
and removal of the product for repair, and shipping costs; Operational adjustments covered in the operating manual for the product, and normal
maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software,
rmware or other products or services provided by anyone other than D-Link; and Products that have been purchased from inventory clearance or
liquidation sales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product.
While necessary maintenance or repairs on your Product can be performed by any company, we recommend that you use only an Authorized D-Link
Service Oce. Improper or incorrectly performed maintenance or repair voids this Limited Warranty.
Disclaimer of Other Warranties:
EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN OR AS REQUIRED BY LAW, THE PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY
OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF
SUCH IMPLIED WARRANTY SHALL BE LIMITED TO THE DURATION OF THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. EXCEPT AS EXPRESSLY
COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE
PRODUCT IS WITH THE PURCHASER OF THE PRODUCT.
Limitation of Liability:
TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL
OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK
STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT
40D-Link DCS-700L User Manual
Appendix C: Warranty
IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK
FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF
THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF
THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT. THE MAXIMUM
LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING
EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED
OR STATUTORY.
Governing Law:
This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This
Limited Warranty provides specic legal rights and you may also have other rights which vary from state to state.
Trademarks:
D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their
respective owners.
Copyright Statement:
No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any
derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the
United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice.
©2014 by D-Link. All rights reserved.
CE Mark Warning:
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take
adequate measures.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by
one of the following measures:
41D-Link DCS-700L User Manual
Appendix C: Warranty
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution:
Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this
equipment.
Operations in the 5.15-5.25GHz / 5.470 ~ 5.725GHz band are restricted to indoor usage only.
IMPORTANT NOTICE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body. To maintain compliance with FCC RF exposure compliance requirements,
please avoid direct contact to the transmitting antenna during transmitting.
If this device is going to be operated in 5.15 ~ 5.25GHz frequency range, then it is restricted in indoor environment only. This transmitter must not
be co-located or operating in conjunction with any other antenna or transmitter.
The availability of some specic channels and/or operational frequency bands are country dependent and are rmware programmed at the factory
to match the intended destination. The rmware setting is not accessible by the end user.
42D-Link DCS-700L User Manual
Appendix C: Warranty
ICC Notice:
Operation is subject to the following two conditions:
1) This device may not cause interference and
2) This device must accept any interference, including interference that may cause undesired operation of the device.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specic operating
instructions for satisfying RF exposure compliance. This equipment should be installed and operated with minimum distance 20cm between the
radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
(i) The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to
co-channel mobile satellite systems;
(ii) The maximum antenna gain (2dBi) permitted (for devices in the band 5725-5825 MHz) to comply with the e.i.r.p. limits specied
for point-to-point and non point-to-point operation as appropriate, as stated in section A9.2(3).
In addition, users should also be cautioned to take note that high-power radars are allocated as primary users (meaning they have priority) of the
bands 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices.
Règlement d’Industry Canada
Les conditions de fonctionnement sont sujettes à deux conditions:
(1) Ce périphérique ne doit pas causer d’interférence et.
(2) Ce périphérique doit accepter toute interférence, y compris les interférences pouvant perturber le bon fonctionnement de
ce périphérique.
43D-Link DCS-700L User Manual
Appendix D: Registration
Version 1.0
September 24, 2014
Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
Registration