Table of Contents
D-Link DNR-2020-04P User Manual
Displayed below is the user manual for DNR-2020-04P by D-Link which is a product in the Network Video Recorders (NVR) category. This manual has pages.
DNR-2020-04P
User Manual
JustConnect 16-Channel PoE Network Video Recorder
Version 1.20 | 2017/06/26
iD-Link DNR-2020-04P User Manual
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any
person or organization of such revisions or changes. Information in this document may become obsolete as our services and
websites develop and change.
Manual Revision
Revision Date Description
1.00 April 27, 2016 • A1 Initial version
1.10 November 29, 2016 • Modified Remote Live View Control specification
1.20 June 26, 2017 • Changed system requirements
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other
countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Copyright © 2017 by D-Link Corporation, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc.
Apple®, Apple logo®, Safari®, iPhone®, iPad®, iPod touch® and Macintosh® are trademarks of Apple Inc., registered in the U.S. and other countries.
App StoreSM is a service mark of Apple Inc. Google Play™ and Android™ are trademarks of Google Inc.
Internet Explorer®, Windows® and the Windows logo are trademarks of the Microsoft group of companies.
ErP Power Usage
This device is an Energy Related Product (ErP) designed to be always on. It can be turned off via a power switch to save energy when it is not
needed.
Switched Off: 0.35 watts
Preface
iiD-Link DNR-2020-04P User Manual
Table of Contents
Product Overview ...................................................................... 1
Package Contents .........................................................................1
System Requirements ................................................................. 2
Introduction ................................................................................... 3
Features ............................................................................................4
Hardware Overview ..................................................................... 7
Front View ................................................................................7
Rear Panel (Connections) ...................................................8
Installation ..................................................................................9
Hard Drive Installation ................................................................9
Connect Your Network Camera(s) ........................................12
Conguring Your DNR-2020-04P ..........................................13
Configuration .......................................................................... 14
Live Video ......................................................................................15
Playback .........................................................................................19
Smart Search ................................................................................21
Menu Bar .......................................................................................24
Setup Wizard ................................................................................25
Setup ...............................................................................................26
Network .................................................................................. 26
Network Setup ................................................................26
Dynamic DNS Settings .................................................28
IP Filter ...............................................................................29
SNMP ..................................................................................30
Camera ...................................................................................31
Audio and Video .............................................................31
Schedule ................................................................................34
Recording Schedule ......................................................34
Event ........................................................................................36
E-Mail Settings ................................................................36
E-Map Settings ................................................................ 37
DI and DO .........................................................................38
Event Settings .................................................................39
Log ......................................................................................41
Maintenance .........................................................................42
Display and Language .................................................42
User Account ...................................................................43
System ...............................................................................44
Time and Date .................................................................45
Firmware Upgrade .........................................................46
Hard Drive .........................................................................47
PoE Status .........................................................................48
Camera Search .............................................................................49
Album .............................................................................................50
Backup ............................................................................................51
Help .................................................................................................53
Applications ............................................................................. 54
D-Link NVR Search Utility - Windows ..................................54
D-Link NVR Search Utility - Mac ............................................56
Playback Manager ......................................................................57
Remote Backup ..........................................................................59
Verication Tool ........................................................................... 61
Table of Contents
iiiD-Link DNR-2020-04P User Manual
Table of Contents
Troubleshooting ..................................................................... 62
Technical Specifications ........................................................ 63
Regulatory Information ......................................................... 66
1D-Link DNR-2020-04P User Manual
Section 1 - Product Overview
• D-Link DNR-2020-04P JustConnect 16-Channel PoE Network Video Recorder
• Hard disk screw x 8
• Rack-mount bracket x 2
• Rack-mount bracket screw x 8
• Power adapter x 1
• Power adapter cable
• Ethernet cable
• Quick Install Guide
• CD-ROM with applications and product documentation
Product Overview
Package Contents
Note: Using a power supply with a different voltage than the one included with your product will cause damage and void the warranty
for this product.
If any of the above items are missing, please contact your reseller.
2D-Link DNR-2020-04P User Manual
Section 1 - Product Overview
Hardware Requirements • Two 3.5” SATA hard disk drives (not included)
Network Requirements
• Broadband Internet connection (for remote access)
• Network camera(s) (refer to the D-Link website for a list of supported cameras)
• 10/100/1000 Mbps Ethernet switch or router
Web-based Configuration
Utility / Remote PC
Minimum Requirements
Computer with the following:
• Microsoft Windows 8, 7; Mac OS (10.7 or above)
• PC with Pentium 4 – 2.4 GHz or above; at least 512 MB RAM
• Internet Explorer 8, Safari 7 (Mac OS) or above
• Existing 10/100/1000 Mbps Ethernet-based network
Note: Make sure you have the latest version of Java installed. Visit www.java.com to
download the latest version.
System Requirements
3D-Link DNR-2020-04P User Manual
Section 1 - Product Overview
Introduction
Congratulations on your purchase of the DNR-2020-04P JustConnect 16-Channel PoE Network Video Recorder.
The DNR-2020-04P is a standalone Network Video Recorder (NVR) designed to meet the surveillance requirements of small
and medium businesses. Thanks to its support for Power over Ethernet (PoE), it is easy to deploy without further investment
in electrical cabling. It features gigabit LAN speeds for high performance monitoring and recording of up to 16 channels
simultaneously in mission-critical applications. Added support for multi-channel network cameras using M-JPEG, MPEG4, or
H.264 codecs, and two 3.5-inch SATA hard disks with RAID to provide versatility, efficiency, and redundancy to meet enterprise
needs.
Featuring a powerful embedded system, the DNR-2020-04P can record, monitor, and play back video simultaneously from
network cameras located in local or remote sites without keeping your PC powered on. Simply connect a USB mouse and
an HDMI or VGA display to the device for instant access. Also, the DNR-2020-04P can be easily set up for remote access and
supports real-time monitoring and playback from anywhere via a web browser. Surveillance can be automated using versatile
recording modes that can be set independently for each channel, and support for audio in /out, DI/DO triggering, and external
USB 3.0 storage fills the needs of small businesses. Completing the package is the bundled video management software and
support for mobile app management, making the DNR-2020-04P a comprehensive monitoring and storage solution for all
your video recording needs.
4D-Link DNR-2020-04P User Manual
Section 1 - Product Overview
Features
Comprehensive IP Surveillance Solution
• Total Solution: The DNR-2020-04P is a standalone network video recorder capable of 24/7 recording without a PC. The NVR
can manage multiple network cameras, provide access to view live video, and play recorded data through the Internet from
anywhere, anytime.
• Convenient and Easy to Use: Power over Ethernet (PoE) saves on infrastructure costs and makes setting up network
cameras easy. A user-friendly GUI simplifies network and camera setup, allowing you to easily access multiple cameras for
configuration and viewing, recording and playback of video.
• Centralized Interface for Configuration: The DNR-2020-04P provides a flexible and economic alternative to manage and
configure multiple network cameras on a centralized device.
• Megapixel Resolution Support: The DNR-2020-04P supports high-resolution recording for vivid videos with high clarity.
Complete Network Functionality
• PPPoE Support: The NVR can connect to the Internet via an ADSL modem over Ethernet.
• DDNS Support: Dynamic DNS is a solution for users without a fixed IP address. With the DDNS service, you can connect to
the NVR over the Internet using an easy-to-remember domain name.
• NTP Support: Maintaining an accurate record of time is essential if recorded data is to be used as evidence. To ensure that
the time recording is always accurate, the NVR can update the system clock from a time server on the Internet using the
Network Time Protocol (NTP).
• DHCP Server: The NVR can act as a DHCP server for easy deployment of network cameras when placed in a network that
has no existing DHCP server.
• Quality of Service (QoS): The NVR can be customized to prioritize specific types of traffic via queues so that streams are
smooth and reliable for mission-critical applications.
• SNMP: The Simple Network Management Protocol (SNMP) is an application layer protocol that facilitates the exchange of
management information between network devices. It helps network administrators remotely manage network devices
and find and solve network problems with ease. The SNMP consists of the following three key components:
• Manager: Network-management station (NMS), a server that executes applications that monitor and control
5D-Link DNR-2020-04P User Manual
Section 1 - Product Overview
managed devices.
• Agent: A network-management software module on a managed device which transfers the status of managed
devices to the NMS.
• Managed device: A network node on a managed network. For example: routers, switches, bridges, hubs,
computer hosts, printers, IP telephones, network cameras, web servers, and databases.
Full-featured Recording
• Flexible Recording Schedule: Once cameras have been set up, a highly configurable scheduling system allows for continuous
recording, set recording during specific time frames, or recording only on motion detection. Each camera can be set to
record independently in their own modes. Event recording based on specific triggers is also supported.
• Recording Automatic Overwrite: The NVR can be configured to overwrite the oldest data automatically when hard disk
space runs out, allowing for continuous and uninterrupted recording.
• Recording Stop Alert: The NVR also provides the option to stop recording when the hard disk is full. When the disk reaches
capacity, a notification can be sent via e-mail and an audible alarm can be sounded.
Comprehensive Data and Security
• Auto Boot after Power Recovery: The NVR will boot up automatically once power is restored after a power outage.
• Access List Control: Users can specify safe and blocked IP addresses to filter external connections, increasing data security.
• Multiple User Privilege Control: Administrators may also choose access privileges for users by specifying the cameras they
may have access to for live view, playback, audio, and PTZ functions.
• Backup Recording Data: Recorded data is stored in a secure database. This recorded data can be backed up to additional
storage locations periodically or whenever needed.
• RAID Mirroring: RAID 1 hard disk configuration mirrors recorded data onto two separate hard drives. In the event of HDD
failure, data integrity is maintained on the secondary HDD.
6D-Link DNR-2020-04P User Manual
Section 1 - Product Overview
Flexible Event Management
• Audio In/Out: Connect a microphone and a speaker to allow two-way communication (if supported by the camera).
• DI/DO triggering: Connect to devices such as door sensors or point-of-sale systems to allow for easy event-based recording
and action triggering. The NVR can monitor trigger events from all cameras, such as motion detection. These can be used
to trigger e-mail notifications and recordings, all centrally handled by the NVR.
Instant Live View
• Full Screen: Enlarge the display to view full-screen live and recorded video views.
• Drag and Drop GUI: With multiple channels enabled, users can drag and drop channels to preferred locations.
• Camera Name and Status on OSD: Camera name and recording status are displayed on the OSD (On Screen Display) to
help identify the current camera.
• PTZ: Users can control Pan/Tilt/Zoom (PTZ) functions for supported cameras from within the interface using the provided
buttons, or by directly clicking on the video.
• Audio Support: Audio picked up by a supported camera can be recorded and played back.
• Preset Point: Camera position presets allow you to instantly restore a previously saved view.
• Digital Zoom: Videos can be enlarged by digital zoom.
Intelligent Playback
• AVI Outputs: Raw video can be exported to AVI format.
• Playback Speed Control: Playback speed control allows for fast forward or fast rewind, and step playback can display video
one frame at a time.
• Smart Search: Users can search through footage by setting specific criteria such as motion detection.
7D-Link DNR-2020-04P User Manual
Section 1 - Product Overview
Hardware Overview
Front View
1HD1 LED A solid green light indicates that the hard drive is installed properly. This light will blink during the
read/write process. If the light is red, the hard drive is installed but has failed.
2HD2 LED A solid green light indicates that the hard drive is installed properly. This light will blink during the
read/write process. If the light is red, the hard drive is installed but has failed.
3LAN LED A solid green light indicates that the device is connected to your network. This light will blink
during data transfer. If the light is off, the device is not connected to your network.
4Power LED A solid green light indicates the device is powered on. This light will blink during bootup. If the
power LED is off, the device is not powered on.
5Power Button Push this button for one second to power on the device or for 5 seconds or more to power off.
6USB 2.0 Port
Connect a mouse to control the management UI when a monitor is connected via HDMI or VGA.
This port is used for firmware updates, video exports to USB drives, and backups. Connection to a
USB mouse/keyboard is supported.
1 2 3 4 5
6
8D-Link DNR-2020-04P User Manual
Section 1 - Product Overview
Rear Panel (Connections)
1Power Input Connect the supplied power cord to the input port.
2PoE Ports 1-4
Connect PoE devices to these ports for power to be supplied via Ethernet. Non-PoE devices will only
have Ethernet functionality.
Green: A solid LED indicates that LAN is connected. The LED will blink during data transfer. An unlit
LED indicates there is no network connection.
Orange: A solid LED indicates that power via PoE is normal. An unlit LED indicates there is no power.
3Audio In/Out
Connect a microphone to the Audio In port to use 2-way communication with your camera(s).
Connect external speakers to the Audio Out port for audio playback.
Please note that your camera(s) must support this feature.
4Gigabit Ethernet Port
Connect the device to your router or switch using an Ethernet cable.
Yellow: Solid indicates Link status (connected to LAN). Blinking indicates data is being transferred.
Green: Solid Indicates an active Gigabit Ethernet connection. Off indicates Fast Ethernet connection.
5HDMI Output Connect to your TV or monitor using an HDMI cable.
6VGA Output Connect a monitor using a D-sub cable.
7USB 3.0 Port Connect an external USB hard disk for more storage.
8DI/DO Connect four DigitaI Input devices and one Digital Output device to these ports.
9Grounding Port Connect a grounding wire to ground the NVR.
10 Reset Button Press and hold the reset button for 10 seconds to reset to factory default settings.
1 2 54
3 6
7
8
10
9
9D-Link DNR-2020-04P User Manual
Section 2 - Installation
Installation
Hard Drive Installation
1. First, make sure the power cable is not plugged into a power outlet.
Access the DNR-2020-04P’s hard drive bays by removing the screws
from the sides and back of the device.
2. Once the cover is removed, slide it rearward to remove it from the
device.
10D-Link DNR-2020-04P User Manual
Section 2 - Installation
3. Detach the HDD bay bracket, then insert one or two 3.5” SATA hard
drives into the drive bays and use the provided screws to secure the
drives in the bracket.
4. Connect the power and SATA cables from the device to each HDD. If a
drive has been inserted correctly, the HDD LED will light up.
5. Re-attach the drive bay bracket to the device enclosure by sliding the
tabs into the holes and using the screws provided to secure it.
11D-Link DNR-2020-04P User Manual
Section 2 - Installation
6. Re-attach the top cover by sliding it over the device. Re-insert the
screw in rear of the cover to secure it.
12D-Link DNR-2020-04P User Manual
Section 2 - Installation
Connect Your Network Camera(s)
You can connect PoE network cameras directly to your DNR-2020-04P.
For non-PoE network cameras, you will need to locate power outlets in the
on-site environment then run a CAT5 UTP cable to the P1-4 ports on the NVR.
1. Connect a CAT5 UTP cable to a port marked either P1, P2, P3, or P4.
2. Connect the other end of the cable to your PoE Camera.
13D-Link DNR-2020-04P User Manual
Section 2 - Installation
Conguring Your DNR-2020-04P
You can setup your NVR without using a PC by connecting a VGA or HDMI
display to the respective ports on the back of the device. To control the
Graphical User Interface (GUI), connect a USB mouse to the USB port on the
front panel.
The default username of the NVR is admin and the default password is blank.
You can customize the password and configure NVR settings by clicking on
the setup wizard icon and following the on-screen instructions.
14D-Link DNR-2020-04P User Manual
Section 3 - Conguration
You can access the configuration interface for the NVR on your PC by running
the NVR Search Utility or manually opening a web browser and entering
the IP address of your NVR. Enter admin as the username and enter the
password you created during installation.
You can also control and manage the NVR locally by connecting it to a TV
or external VGA/HDMI monitor and plugging in a USB mouse to control the
interface.
This section will enable you to configure and view the live video from your
network cameras.
Configuration
Live Video Shows the live video of network cameras and
controls PTZ functions.
Playback Displays recorded video and exports snapshots or
video.
Log Out Logs out of the NVR.
Shut Down Shuts down the NVR.
15D-Link DNR-2020-04P User Manual
Section 3 - Conguration
This section describes the configuring and viewing of live video from
your network cameras, the functions of the live video screen, and the PTZ
functions. To monitor live video:
Step 1: Click the button at the top of the screen.
Step 2: Select a camera(s) from the camera list on the right and then drag
it to the location to where you want it to be displayed.
Optional: You can change the video display position by dragging it to another
position.
Live Video
Notes:
1. The selected video will be marked with a red line.
2. Enable EPTZ: Right-click on the video and click on EPTZ. Click the + or – button to zoom in or zoom out. The flashing square
at the lower right of the video grid indicates the corresponding view of the camera.
3. If the camera supports PTZ, you can control the selected camera from the PTZ panel.
4. If the camera supports audio, you can check Enable Audio from the right-click menu and listen to the channel’s audio.
5. Snapshot: Right-click on the video and select the snapshot function to capture a specific video image immediately.
6. Right-clicking on the video will show the option as Full Screen. Press the ESC button on the keyboard to return to normal
display.
7. Swap: Right-click on the video and select Swap to display a different video channel.
16D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Display Single feed Use this button to switch to a single camera
feed in the live video display area.
Display 2 x 2 feeds Use this button to switch to view four cameras
in the live video display area.
Display 1 + 5 feeds
Use this button to switch to view one large
and five small streams in the live video display
area.
Display 3 x 3 feeds Use this button to switch to view nine cameras
in the live video display area.
Display 2 + 8 feeds Enlarge two channels in the top row.
Display 2 + 8 feeds Enlarge two channels in the left column.
Display 1 +12 feeds Enlarge one channel and show 12 additional
streams.
Display 4 + 9 feeds Enlarge 4 channels and display 9 feeds.
Display 1 center +
12 feeds
Enlarge one channel in the center and display
12 feeds.
Display 16 feeds Show all 16 feeds simultaneously.
Switch between
feeds Click to cycle between 2x2, 3x3, 4x4 views.
Full Screen
Select to display the video with full screen. Press
the ESC button on the keyboard to return to
normal display.
Glance Activate auto scan to rotate the channels/
cameras on the display screen.
Actual Size Use this button to display the recording in its
original resolution.
OSD Display video stream information in the window.
17D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Camera List:
Optimize:
Scan Camera:
Displays the cameras connected to the NVR and their respective IP
addresses.
Click Optimize to fine tune your camera settings for smoother live
viewing and video recording.
Click Scan Camera and the NVR will use Admin as the user name and
a blank password to automatically add any network cameras from the
same local area network.
Information panel on the right side of the GUI:
Snapshot Click to take a still image and save it to a folder.
Manual Record Click to enable or disable manual recording.
Speaker On/Off Turn the speaker on or off.
Mic On/Off Turn the microphone on or off.
PTZ Control
You can control the camera view by utilizing
the PTZ (pan, tilt, and zoom) camera control
panel to adjust the camera angle. This function
is only available with cameras that support the
PTZ function.
18D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Log: Displays the System, NVR, and Event logs.
Check E-map to see camera(s) location and connection status.E-Map:
System Info:
Storage
Information:
Displays the NVR’s network information such as the NVR’s IP address,
MAC address, and transfer rates.
Displays a pie chart and table of used and free space as well as any
attached storage devices.
19D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Playback
This section shows the NVR's recorded video feeds. You may select any of the available icons listed below to playback, adjust,
and export the recorded video streams.
Display Single feed Use this button to switch to a single camera
feed in the live video display area.
Display 2 x 2 feeds Use this button to switch to view four cameras
in the live video display area.
Display 1 + 5 feeds
Use this button to switch to view one large
and five small streams in the live video display
area.
Display 3 x 3 feeds Use this button to switch to view nine cameras
in the live video display area.
Display 2 + 8 feeds Enlarge two channels in the top row.
Switch between
feeds Click to cycle bewteen 2x2, 3x3, 4x4 views.
Full Screen Use this button to switch to a full screen view
of the live video feed.
Display 2 + 8 feeds Enlarge two channels in the left column.
Display 1 +12 feeds Enlarge one channel and show 12 additional
streams.
Display 4 + 9 feeds Enlarge 4 channels and display 9 feeds.
Display 1 center +
12 feeds
Enlarge one channel in the center and display
12 feeds.
Display 16 feeds Show all 16 feeds simultaneously.
Actual Size Use this button to display the recording in its
original resolution.
20D-Link DNR-2020-04P User Manual
Section 3 - Conguration
On Screen Display
Settings
Use this button to configure the various
settings for the on screen display.
Cue in/Cue Out Click the Cue In or Cue Out button to set the
period for saving a video.
Play/Stop/Pause Select a camera/video and click this button to
play/stop/pause a particular channel.
Speed Click to increase or decrease the playback
speed.
Reverse/Step
Forward
Click to pause the playback and move to next
frame or last frame.
Smart Search
Button Click to start the smart search.
Export Use the button to export a video stream.
Snapshot Click this button to take a still image of the
selected video stream.
21D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Smart Search
Smart Search lets your find specific events for review. You may select any of the available icons under playback to control,
adjust, and export the recorded video streams.
Step 1:
Click on the Playback icon to enter playback mode.
Step 2:
Select the time and date of your specific event in the Calendar in the right
column to begin playback from.
22D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Step 3:
Select the time period of the event that you wish to search for and press OK in
the pop-up window. This will show the channels available for the time period.
Step 4:
In the available channels, select the channel that you wish to review.
Step 5:
Click on the Smart Search button to search the selected channel for the
specified time period.
23D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Step 6:
If necessary, in the Smart Search window, select the area you wish to detect
for abnormal events.
Step 7:
Select the sensitivity level from the drop-down menu.
Step 8:
Click OK when you are done specifying the selected area in the channel for
abnormal events during the specified time period.
Step 9:
Click a channel event under the Smart Search tab in the Event List window
to play back the recorded event.
24D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Menu Bar
The Menu bar resides on the left side of the screen. You can click the icons in this bar to access different sections, which are
described in the following pages.
Setup Wizard
This will start the Setup Wizard, which will help you
set up and configure the basic settings of the NVR.
Refer to Setup Wizard on page 25.
Settings
This will open the settings page of the NVR, where
you can manually configure the different settings
and features of the device. Refer to Setup on page
26.
Camera Search
This will let you automatically search for new
cameras to add to the NVR. Refer to Camera Search
on page 49.
Album
This will open the album, where you can see all the
snapshots taken by the NVR. Refer to Album on
page 50.
Backup
This will let you back up the recordings stored on
the NVR to a USB drive, Samba server, or FTP server.
Refer to Backup on page 51.
Help This shows more information about using the NVR.
Refer to Help on page 53.
25D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Setup Wizard
The Setup Wizard, helps you set up and configure the basic settings of the
NVR. Select the language you want to use, then click the Next button to
start the wizard.
26D-Link DNR-2020-04P User Manual
Section 3 - Conguration
DHCP:
Static IP:
IP Address:
Subnet Mask:
Gateway:
DNS1:
DNS2:
Enable
PPPoE:
DHCP Server:
Enable Bonjour:
Select this connection if you have a DHCP server running on your network
and would like a dynamic IP address to be automatically updated to your
NVR.
You may obtain a static or fixed IP address and other network information
from your network administrator. A static IP address will simplify access to
your NVR in the future.
Enter the fixed IP address of the NVR and the port that is used to access the
web interface.
Set this to match the subnet mask of the provided IP address. The default
value 255.255.255.
Set this to the default gateway on your router or local subnet for proper network routing.
Primary domain name server that translates names to IP addresses.
Secondary domain name server to back up the primary domain name server.
Enable this setting if your ISP is using PPPoE. You may already have a Username and Password provided by your ISP, or you may
need to contact your ISP. The connection status will be determined automatically by the system.
Enable or disable the DHCP server. If your network doesn’t have a DHCP server, enable this feature for easier local network setup.
You can specify the IP address range and lease time that DHCP uses to provide IP addresses to clients.
Enable the Bonjour service to allow users to discover the DNR-2020-04P with Apple devices.
Setup
Network
Network Setup
Network Setup lets you configure how you connect the NVR to the Internet or local network.
27D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Enter the name of the device that will be used to identify the DNR-2020-04P when using Apple devices.
Bonjour
Name:
28D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Server
Address:
Host
Name:
Username:
Password:
Timeout:
Status:
Select a dynamic DNS service provider from the pull-down list or input
a custom DDNS server IP address.
Enter your host name. For example: myhost.mydomain.net.
Enter the username for your dynamic DNS account.
Enter the password for your dynamic DNS account. Confirm it in the
next text box.
Type in the number of hours between updates to your DDNS provider.
Displays the status of your DDNS connection.
Dynamic DNS Settings
Enable this option only if you have registered a domain name with a dynamic
DNS service provider. The following parameters are displayed when the
option is enabled.
29D-Link DNR-2020-04P User Manual
Section 3 - Conguration
IP Filter
By enabling IP filtering you can allow or block visitors from accessing the
NVR. To add IP addresses to the Allowed or Blocked lists, enter the IP address
range you want to allow or block into the text boxes, then click on Add to
Allowed List or Add to Blocked List.
Enabling this will allow only the IP addresses in the allowed list to
access your NVR.
Note: Make sure you enter the IP address of the PC you use to access the NVR
before enabling this option, or you may not be able to access it afterwards.
Enabling this will block all IP addresses in the blocked list from accessing
your NVR.
Enable
Allowed List:
Enable
Blocked List:
30D-Link DNR-2020-04P User Manual
Section 3 - Conguration
SNMP
If you have SNMP agents that you wish to send traps such as alarms and
syslog messages to your NVR, you can enable and configure your SNMP
settings on this page.
Enable and enter a password for the Read/Write and Read-Only
community strings here. Change the community string to keep
intruders from getting information about the network setup.
This SNMP version adds encryption and authentication to the service for
better security. You can specify separate Read/Write versus Read-only
name and passwords as well as the type of encryption to use.
Enable
SNMPv1,
SNMPv2c:
Enable
SNMPv3:
31D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Camera
Audio and Video
Camera
Name:
Main Profile:
Video Format:
Frame Rate:
Resolution:
Bit Rate:
Quality:
Sub Profile:
The name of the camera is displayed here.
Choose from preset video profiles to apply as the main profile for
this camera.
Select from the video formats supported by the camera. Options
include MJPEG, MPEG4, and H.264.
Select the frame rate for the camera. The default rate is 15 fps.
Note: The system will adjust the frame rate automatically based on the
maximum frame rate that the camera can support.
Select the resolution for the selected camera.
Select the preferred bit rate for small or large file sizes.
Select the quality of the video for the camera.
Choose from preset video profiles to apply as the sub profile for this
camera. Select alternate settings for the above fields for this profile.
This section will allow you to configure and modify video, audio, and image
settings for each camera. Click on the camera name in the top section and
configure the parameters in the bottom section.
The Video tab has the following settings:
32D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Brightness:
Contrast:
Saturation:
Sharpness:
Adjust the brightness.
Adjust the contrast.
Adjust the saturation.
Adjust the sharpness.
The Image tab has the following settings:
Note: For some IP cameras, the NVR supports motion detection.
Audio Format:
Enable
Microphone:
Audio-in Gain
Level:
Enable
Speaker:
Audio Out
Volume Level:
Select from supported audio formats (G.711, G.726, AAC).
Turn on/off the microphone on the camera (if supported).
Select the audio-in gain level for the microphone.
Enable audio out on the camera (if supported).
Adjust the volume of the camera’s speaker.
The Audio tab has the following settings:
33D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Enable Video
Motion:
Clear:
Restore:
Select All:
Sensitivity:
Click on the check box to enable or disable motion detection settings.
Clear all motion detection area selections on this channel.
Restore previous motion detection area selections on this channel.
Click on the check box to select all motion detection area selections
on this channel.
Set the sensitivity of the motion detection from 0-100 in this text box.
The Motion tab has the following settings:
34D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Schedule
Recording Schedule
Enable
Schedule
Recording:
Enable
Automatic
Overwrite:
Enable Audio
Recording:
Keep [x]
Day(s) Video:
Record according to a schedule set below.
Select this option to automatically empty disk space when the disk
space is full. This will overwrite the earliest recorded video with the
latest video one day at a time.
Set the duration to store recorded video clips. After the duration, the
clips will be purged.
Keep at least [x] days of video footage on hard disk when the video
recycles.
Once the cameras have been set up, a highly configurable scheduling system allows for either continuous recording or scheduled
recording. Each camera can be set to record independently at preset intervals and provide event recording based on specific
triggers. The NVR can be configured to overwrite the oldest data automatically when hard disk space runs out, allowing for
continuous and uninterrupted recording. It is possible to specify the number of days the recording should be kept for (within
the limits of the hard disk capacity).
Set Recording Mode
Always
Record:
Add/Edit
Schedule:
Delete
Schedule:
Copy
Schedule:
Click this button to enable always-on recording for all IP cameras.
Select a camera from the camera list, and click Add/Edit Schedule to
create a new schedule for the selected camera.
Select a camera from the camera list, and click Delete Schedule to
delete the schedule for the selected camera.
Select a camera from the camera list, and click Copy Schedule to create
a duplicate schedule.
Set Recording Schedule
35D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Set Recording Schedule Configuration
1. Select one of the cameras from the list and click on Add/Edit Schedule.
2. Choose a recording mode. The available options are: Continuous
Recording, Record on event, and Record on motion.
3. Enter the desired Start time and End time, and choose a day of the week
that the recording function will be active.
4. Press the OK button to save the new schedule.
Note:
• When configuring the motion detection event, be sure to set up the motion
detection function on your camera first.
• After changing the motion detection settings of your camera, be sure to
disconnect the camera from the NVR and then re-connect it to update any
new changes.
• You can drag the time bar to change the recording period. Select the red bar
for Continuous recording feature, the green bar for Record on event and
the blue bar for Record on motion feature.
36D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Event
E-Mail Settings
If an event occurs, such as motion detection, or a hard disk failure, the NVR can
be configured to send an email notification to one or more email addresses.
Here you can configure the e-mail notification settings.
Sender Email
Address:
Server
Address:
User Name:
Password:
Port:
Test:
Input the sender’s e-mail address.
Enter the SMTP (Simple Mail Transport Protocol) server IP address.
Enter the user name for your SMTP account.
Enter the password for your SMTP account.
Enter the port used by your SMTP server. Tick the checkbox here if the
e-mail server uses the SSL protocol.
Click this button to send a test email and verify whether the settings
are correct.
Adding Contacts
Step 1: Insert the name of a new contact to receive notifications.
Step 2: Insert the e-mail address of this contact.
Step 3: Click Add.
37D-Link DNR-2020-04P User Manual
Section 3 - Conguration
E-Map Settings
The E-Map lets you view where cameras are placed via a blueprint of your
home or business. When an event occurs, the E-map event indicator will
show the location of the event.
You can upload your E-Map to the NVR. The maximum file size is 20 KBytes
in BMP and JPG file format. You can then drag and drop camera icons onto
the E-Map indicating camera placement.
Click Save Settings once you are done configuring your map.
Edit:
Delete:
Upload an image to be used as your map.
Delete a camera icon from the map.
38D-Link DNR-2020-04P User Manual
Section 3 - Conguration
DI and DO
The DI and DO page lets you manage four Digital Input (DI) and one Digital
Output (DO) devices connected to your NVR. It shows you the DI/DO
mapping and the current state of the device (Normally Closed (NC), Normally
Open(NO), or OFF).
For Digital Inputs 1-4:
When a DI is set to Normally Closed (N.C.), the normal state of the circuit is
closed to ground. In this scenario, events are triggered when the circuit is
opened, which then changes the status of the device to Open.
Example: The magnetic contacts on a window sensor that are broken during
a break-in will trigger an event.
When a DI is set to Normally Open (N.O.), the normal state of the circuit is
open. In this status, events are triggered when the circuit is closed to ground,
which then changes the status to Closed.
Example: A DI light switch that is turned on during off hours may close the
circuit and trigger an event.
For Digital Output:
• OFF indicates that the device is inactive and has not been triggered.
• ON indicates that the device is currently triggered.
Please go to the Event Settings on page 39 to select Digital Output as
the action and select the events that can act as triggers.
Click Save once you are done configuring your devices.
39D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Event Settings
Connection
Lost:
Motion
Detected:
Passive
Infrared:
Digital Input:
Sound
Detection:
Hard Disk
Space Full:
Hard Disk
Error:
Fan Error:
Network
Disconnected:
An action is executed when connection is lost.
An action is executed when motion is detected.
An action is executed when the PIR sensor is activated.
An action is executed when the signal voltage is above or below a
specific threshold.
An action is executed when the camera microphone detects audio.
When the Overwrite function is not enabled, the NVR will stop
recording when the HDD is full and will send an alert.
An alert will be sent if there is an error with the hard disk.
An alert will be sent if there is a fan error.
An action is executed when the NVR is disconnected from its
network.
For Camera Event Settings and System Event Settings:
Step 1: Select an event to listen for:
This page lets you configure what to do when an event is triggered by a
camera, such as when motion is detected. The NVR can then perform an
action, such as sending an e-mail notification.
40D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Buzzer:
E-Map:
E-Mail:
Digital
Output:
The buzzer will sound as an alert.
Select this option to update the camera status on the E-Map.
Select this option to have e-mail sent to a specified SMTP account
after receiving a camera event.
If you have connected a device to the NVR’s digital output, selecting
this option will trigger the output when a selected event occurs.
Step 2: Select an event action:
41D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Log
System Log:
NVR Log:
NVR Event
Log:
Displays the system log information.
Displays the NVR log information, such as when recording stops or
the NVR system starts.
Displays the event log information, such as motion detection or if a
camera is disconnected.
This section displays the event log information including System, NVR, and
event logs. It allows you to check the details of each log and download them
to an external USB drive for backup. Click Clear to reset the logs.
42D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Maintenance
Display and Language
Language:
Device Name:
Auto Scan
Interval:
Enable
Camera OSD:
Camera
Name:
Date:
Bitrate:
Camera
Number:
Time:
Frame Rate:
Size:
Color:
Select the language.
Change the device name of the NVR.
The auto scan feature allows you to monitor and scan the activity on
all attached cameras for a specific time.
Enables or disables the camera’s OSD.
Displays the name of the camera on the OSD.
Displays the date.
Displays the bitrate.
Displays the camera number.
Displays the time.
Displays the frame rate.
Displays the size in pixels.
Change the color of camera’s OSD.
This section will let you manage language, display, and On-Screen Display
(OSD) settings for your NVR.
43D-Link DNR-2020-04P User Manual
Section 3 - Conguration
User Account
The User Account page enables you to create and delete user accounts for
accessing your NVR device and set user privileges for them.
Adding a New User
Follow the steps to manage existing user accounts and give new users access to the
NVR. Management options include adding and deleting users, and allowing access
rights to users. You can also change admin and user passwords.
Step 1: Click Add to input the new user account.
Step 2: Input the password. Type the password again to confirm.
Step 3: Select the channel of the cameras and PTZ/Microphone functions that this
user can access.
Step 4: Select the playback channels and Miscellaneous functions that this user can
access.
Step 5: Click Save Settings to apply.
The Administrator account can configure all functions of the NVR. This account cannot
be deleted. The default password for admin is blank. Setting a password after the first
login is strongly recommended. Hold the reset button on the rear panel of the device
to reset the NVR password to the factory default.
Note: Resetting the device will erase all previously saved settings.
44D-Link DNR-2020-04P User Manual
Section 3 - Conguration
If the NVR is malfunctioning or crashes unexpectedly, click Restart
on the NVR. Restarting the NVR will take about ninety seconds.
This will reset all settings back to the factory defaults.
All the configurations can be saved as a file to the specified location.
Click Save to save the file.
You can restore the configuration file after resetting to factory
default file. Click Browse to select the configuration file and restore
it by clicking Load.
When the administrator enters all the Setup pages (except the
Live Video and Playback Page), the NVR will keep track of the idle
time when the user is not active. If this inactive period exceeds the
specified limit, the user will be logged out and will have to log in
again for security purposes. You can change the idle time limit here.
Enable or disable the buzzer. This is an audible alarm that sounds
when an event is triggered.
Enable or disable auto plugin. Enabling auto plugin allows the NVR
to automatically detect any connected cameras on the LAN. The NVR
will automatically change the secondary video profile of IP cameras
once this option is enabled.
System
System Restart:
Restore to
Factory Default
Settings:
Save
Configuration
Settings:
Load
Configuration
Settings:
Idle Time
(Minutes):
Buzzer:
Enable Auto
Plugin:
On this page, you can save the NVR configuration to a file and restore it
when necessary, such as restarting the NVR in the event of a crash. Reset
the NVR to restore all configurations to factory default. Click Save to apply
your changes.
45D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Time and Date
Manually Set
the Time and
Date:
Synchronize
with NTP
Server:
Time Zone:
Enable
Daylight
Saving:
Enter the complete time and date settings manually.
Select or enter an NTP Server here. An NTP Server is a server on the
Internet that maintains time. The NVR will contact the server you
entered and update to the correct time.
Select your time zone from the pull-down list. There are three choices
for setting the time.
Check the box to enable daylight savings time (DST). You can enable
automatic daylight savings time, or enter daylight saving time start
and end dates manually. You can enter the month, week, day, hour and
minute when daylight savings time starts and ends, and also enter the
timezone offset from GMT/UTC.
Configure time and date settings here. Click Save Settings to apply your
changes.
46D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Firmware Upgrade
The device firmware and device pack can be upgraded from this page. To
update the firmware, you must save the updated firmware file to a USB drive,
then connect it to the NVR’s USB port. Click Browse to search the USB drive
for the firmware update file. Click Load to upgrade. The new version number
will be displayed. Firmware updates are available on the D-Link Support page
at http://www.dlink.com/support
Note: You may need to reformat your USB drive to NTFS format in order for the
DNR-2020-04P to recognize it.
47D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Hard Drive
You can format the HDD and USB drives in this section, as well as eject the
USB drive. Formatting the HDD and USB drive will erase all data on the drive.
Note: Do not unplug the USB drive without clicking eject first, or the files on the
USB drive may become damaged.
HDD format
Standard
(Individual Disks):
HDD format
JBOD (Linear -
Combines Both
Disks):
HDD format RAID
0 (Striping - Best
Performance):
HDD format RAID
1 (Mirroring -
Keeps Data Safe):
Estimated Size:
HDD Used:
Synchronization:
Only supports one hard drive to create the volume.
Combines both hard drives in a linear fashion to create
one large volume geared towards maximum available space.
This mode does not provide any redundancy.
Combines both hard drives in a striped fashion to create
one large volume geared towards maximum performance.
All data will be lost if one disk fails.
Mirrors the hard drives for redundancy. If one hard drive fails,
the other still has all the data. Replace the failed hard drive and the
volume will rebuild, providing maximum data protection.
Displays the total capacity available for use.
Displays the used space and total space of the volume.
In RAID 1 Mode, use this function to rebuild your data to a new disk
when one of the hard drives has been replaced.
48D-Link DNR-2020-04P User Manual
Section 3 - Conguration
PoE Status
You can check the status of the PoE ports (P1-P4) on the NVR from this page.
Link Status: Displays the status of the Ethernet connection
Link A network connection is established.
Unlink There is no network connection.
PoE Consumption: Displays the status of the PoE port
15W The camera’s maximum power consumption is 15 watts.
7W The camera’s maximum power consumption is 7 watts.
4W The camera’s maximum power consumption is 4 watts.
0W PoE is not actively providing power.
N/A PoE is not supported.
Overload The total PoE power consumption is above 45 watts. Power
provision has stopped.
Overcurrent The camera’s power consumption is beyond the PoE class limit.
Power provision has stopped.
Total PoE
Power
Consumption
The NVR can supply a total of 45 watts via PoE.
49D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Camera Search
The Camera Search function lets you automatically add cameras to the NVR.
You can then view camera information and preview the camera’s feed. To
add cameras follow the steps below.
Step 1: Click either D-link for D-link brand cameras or Onvif for cameras
with Onvif certification. Click Search to search for network cameras.
The system will list all the available cameras at that point in time.
Step 2: Highlight the camera by clicking on it. You can enter the camera
name, user name, and password of the camera at the bottom.
Step 3: Then click the Add button to add a camera to your camera list. If the
cameras are already added, they will be marked red.
Notes:
• Some cameras will limit the logins to the administrator only.
• To add cameras without the UPnP function, please go to the camera Setup
menu and enter the IP address manually.
• You may not be able to see all the cameras on your first search. It may take a
moment for the devices to respond to the UPnP request. Please click Search
again if the cameras are not immediately displayed.
Step 4: Click Save to add the selected camera to the NVR.
Step 5: Click OK in the pop-up window to confirm. Repeat steps 2 through
5 to add other cameras to your list.
50D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Album
If you have taken screenshots from the live page, you can view them in the
Album. You can also export or delete screenshots from this page.
51D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Backup
Check the Enable option to back up your recording data according to
a daily schedule.
The daily scheduled time to start the backup process.
Select a time period of recordings to back up.
Select the camera channels that you want to back up the recordings of.
You can select whether to back up to a USB drive, a Samba server, or
an FTP site. Click Stop to stop the backup process.
Enable auto
backup:
Daily backup
time:
Start/End
time:
Camera:
Backup Type:
Unlike the Save Video function, the Backup function will save all the recorded
videos during the time period you select, instead of a single video clip. You
can set the NVR to make daily backups by using Auto Backup, or you can
make a single backup immediately by using Manual Backup.
Select a date to start the backup process.
Select a time period of recordings to back up.
Select the cameras that you want to back up the recordings of.
You can select whether to back up to a USB drive, a Samba server, or
an FTP site.
Click Start to start a manual backup using the settings specified, or
click Stop to stop a currently running backup.
Date:
Start/End
time:
Camera:
Backup Type:
User Name:
Start/Stop:
If you choose Manual Backup, you will see the following settings:
52D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Enter the address of your Samba server.
Enter the folder path for the Samba server that you want to back up
your recordings to.
Enter the username for your Samba server account.
Enter the password for your Samba server account.
Samba server:
Samba entry:
User Name:
Password:
If you choose Samba as the backup type, you will see the following settings:
Enter the address of your FTP server.
Enter the port used by your FTP server.
Enter the folder path for the FTP server that you want to back up your
recordings to.
Enter the username for your FTP server account.
Enter the password for your FTP server account.
FTP server:
FTP port:
Folder:
User Name:
Password:
If you choose FTP as the backup type, you will see the following settings:
53D-Link DNR-2020-04P User Manual
Section 3 - Conguration
Help
The NVR Help page provides a list of support topics. Click on any of the topics
in the left-hand bar to access the manual for that specific feature.
54D-Link DNR-2020-04P User Manual
Section 4 - Applications
In Windows, you can run the D-Link NVR Search Utility from the CD to search for the NVR on the local network. When powered
on, during the initial boot sequence, the device will wait to be assigned an IP address via DHCP by default. If it does not receive
a DHCP-assigned IP address, the Auto-IP process will assign a 169.254.xxx.xxx address to the device. If you want to change the
IP address before logging in, or are unable to connect to the NVR IP address, you can use the NVR Search Utility provided on
the product CD to locate the device on your network and make any changes that are needed.
Applications
D-Link NVR Search Utility - Windows
Network
Video
Recorder:
Refresh:
Configuration:
LAN:
Receive
DHCP:
Apply:
About:
Exit:
The D-Link NVR Search Utility displays any NVR devices it
detects on the network.
Click to refresh the device list.
Click Configuration to access the Web-based configuration
of the NVR.
Configure the LAN Settings for the NVR.
Select Enable to use DHCP for your LAN IP settings, or
Disable to use static IP.
Click Apply to save and activate the changes to the
LAN Settings.
Click About to view the software version of the NVR Search Utility.
Click Exit to close the utility.
55D-Link DNR-2020-04P User Manual
Section 4 - Applications
Select a device from the list and click Configuration. This will launch the computer’s default web browser and direct it to the
IP address listed for the device.
Note: The computer used to access the NVR web-based configuration manager must be on the same subnet as the NVR. If your
network is using a DHCP server and the computer receives IP settings from the same DHCP server, the NVR will automatically be in
the same subnet.
If you have any problems accessing the Internet, make sure the browser is not configured to use a proxy server.
56D-Link DNR-2020-04P User Manual
Section 4 - Applications
Insert the CD, go to the CD directory, then enter the Mac Utility folder. Click the NVR Search Utility file to run the setup tool.
When first powered on, during the initial boot sequence the device will wait to be assigned an IP address via DHCP. If it does
not receive a DHCP-assigned IP address the Auto-IP process will assign a 169.254.xxx.xxx address to the device. If you want
to change the IP address before logging in or are unable to connect to the NVR IP address, you can use the NVR Search Utility
provided on the product CD to locate the device on your network and make any changes that are needed.
Network
Video
Recorder:
Refresh:
Configuration:
LAN:
Receive
DHCP:
Apply:
About:
Exit:
The D-Link NVR Search Utility displays any NVR devices it detects on
the network.
Click to refresh the device list.
Click Configuration to access the Web-based configuration of the NVR.
Configure the LAN Settings for the NVR.
Select Enable to use DHCP for your LAN IP settings, or Disable to use
static IP.
Click Apply to save and activate the changes to the LAN Settings.
Click About to view the software version of the NVR Search Utility.
Click Exit to close the utility.
D-Link NVR Search Utility - Mac
57D-Link DNR-2020-04P User Manual
Section 4 - Applications
Playback Manager
Play Recorded Video
Step 1: Click the Playback tab at the top of the window.
Step 2: Click the day highlighted in red on the calendar. The View Recorded
Files Window will show information about the available video clips.
Step 3: Select the date you would like to play back video records for.
Step 4: Highlight the video records that you would like to review.
Click the OK button.
This feature allows you to search and play back recorded video.
Play
Stop
Select a camera/video and click this button to play/stop/pause a
particular channel.
Step forward
Step backward
58D-Link DNR-2020-04P User Manual
Section 4 - Applications
Fast forward
Rewind
Set the start point of the export file
Set the end point of the export file
59D-Link DNR-2020-04P User Manual
Section 4 - Applications
Remote Backup
You can run the Remote Backup application to back up your files. Run the
application by going to Start > Programs > D-Link > DNR-2020-04P >
Remote Backup. You can Add, Delete, and Edit multiple NVR devices here.
Step 1: Input the IP address of the NVR.
Step 2: Input the user name.
Step 3: Input the password and click OK.
Step 4: Click New Period.
Step 5: Select the date that the video was recorded.
Step 6: Set the Start Time and End Time you would like to back up (or
highlight the video records that you would like to back up). The
time period specified cannot exceed 24 hours.
Step 7: Select the cameras you would like to back up and click OK.
Step 8: Select the time slot which you would like to back up.
Step 9: Click Backup.
Step 10: Select the location where you would like to save the backup data.
Step 11: Check the Include the Backup Program option, which will add a
playback application into the backup folder.
60D-Link DNR-2020-04P User Manual
Section 4 - Applications
Step 12: Click OK.
Select the device from the list and click Configuration. This will launch the
computer’s default web browser and direct it to the IP address listed for the
NVR. If you encounter a problem, make sure the browser is not configured
to use a proxy server.
Note: The computer used to access the remote backup application must be
on the same subnet as the NVR. If your network is using a DHCP server and the
computer receives IP settings from the DHCP server, the NVR will automatically
be in the same subnet.
61D-Link DNR-2020-04P User Manual
Section 4 - Applications
Verication Tool
The Verification Tool verifies whether the data created by the system has
been tampered with. It’s the process by which a digital watermark (a digital
signature) is added to each recorded video frame to ensure its authenticity.
There are two types of data that can be verified by the Verification Tool:
1. Video files (.avi, .asf)
2. Image files (.bmp, .jpg)
Add File:
Add Folder:
Remove File:
Select All:
Add a single file to the list for verification.
Choose a folder with multiple files to list for verification.
Remove indicated file(s) from list.
Select all files in the list for verification.
Note: Choose the file type first before selecting files.
62D-Link DNR-2020-04P User Manual
Section 5 - Troubleshooting
Troubleshooting
Replacing a failed disk drive
If a disk drive fails, the Disk Status LED will turn red. When replacing a failed disk drive, be sure to use a new drive of the same
or slightly greater capacity.
Step 1: Power off the NVR.
Step 2: Open the unit’s cover.
Step 3: Pull out the failed disk drive.
Step 4: Install a new disk drive into the slot. Please refer to Hard Drive Installation on page 9.
If you forget the admin password for the device
If you forget the password, you can reset the device, which will reset the password for the admin account to its default (blank).
Please note that this will reset all settings on the device back to the factory defaults, and it may cause data to become inaccessible;
it is highly recommended that you back up your recorded data before resetting your device. To reset the device, make sure it
is turned on then press and hold the reset button for 10 seconds until the Power LED flashes three times. The administrator
password will now be blank.
If you cannot log in to the NVR using your web browser
Check the settings of your anti-virus software to make sure it isn’t blocking access to the NVR web interface.
If you cannot see the complete web interface in your web browser
If you cannot see the complete page of the system, the ActiveX installation process may not be complete.
Step 1: Open your web browser and connect to your NVR.
Step 2: The browser will ask whether to install ActiveX.
Step 3: Click the upper bar to begin the installation process.
Step 4: Click Install to complete the process.
63D-Link DNR-2020-04P User Manual
Appendix A - Technical Specications
Technical Specifications
Firmware Specifications
OS
• Linux
CAMERAS SUPPORT
• Supports D-Link network cameras. Includes support for auto-discovery and up to
3 megapixel resolution.
RECORDING PERFORMANCE
• Max recording bitrate: 80 Mbit
• Primary video profile:
H.264 at 1080p at 480 fps
• Secondary video profile:
H.264 at VGA at 240 fps
CAMERA SEARCH
• LANDAP, ONVIF, Hello Command
AUDIO & VIDEO RECORDING
• Synchronized audio & video recording.
COMPRESSION FORMAT
• H.264, MPEG-4, M-JPEG (depending on the network camera)
VIDEO SETTING
• Resolution, quality, frame rate, enable audio, image parameters
RECORDING TYPE
• Record by schedule, manual record and event recording (motion detection from
camera)
REMOTE LIVE VIEW
• Supported via IE browser (Max. 16 simultaneous channels)
REMOTE LIVE VIEW CONTROL
• Live view, preset/go, patrol, focus, PTZ functions, snapshot, full screen, digital
zoom, e-map, multiple views (1/4/9/16)
REMOTE PLAYBACK
• Supported via IE and NVR client
• Playback system with timeline GUI, search by event, area, cameras, date and time
• IE & NVR client support 16 channel playback
• Digital zoom in to specific area
REMOTE PLAYBACK CONTROL
• Playback with normal, fast forward/rewind, and step forward/rewind
OVERWRITE RECORDING
• Auto recycling when disk storage is full
FILE EXPORT
• Export videos to AVI or ASF file
• Export images to BMP or JPG file (only support ASF export in remote mode)
USER ACCOUNT
• Additional accounts can be created to allow user access to the system, and
specify authorization for the camera channels, PTZ, etc.
DDNS
• D-Link DDNS and DynDns server support
• Manual DDNS
SYSTEM TIME
• Set the system time (D-Link NTP, manual input)
REMOTE BACKUP
• Remote software can back up raw data to redundant storage
• Auto back up video from the previous day to the FTP server
SYSTEM STATUS
• System status
• EMAP support
NETWORK SERVICE PROTOCOLS
• IPV4, ARP, TCP, UDP, ICMP
• DHCP Server/Client
64D-Link DNR-2020-04P User Manual
Appendix A - Technical Specications
• NTP Client
• DNS Client
• DDNS Client (D-Link)
• SMTP Client
• FTP Client
• HTTP Server
• RTP
• RTCP
• RTSP
• IP filtering
• UPnP
• CoS
• QoS/DSCP
• HTTPS
• Samba
• Bonjour
• SNMP v1/v2c/v3
• PPPoE
• DDP
USER INTERFACE
• HTTP Web browser - Internet Explorer 8, Safari 7 (Mac OS) or above
• NVR Search Utility
Hardware Specifications
STANDARDS
• IEEE 802.3u/x/z
• IEEE 802.3af
• Auto MDI/MDI-X
HARD DISK
• SATA I, II, III
• Reformat Disk
TWO RESET MODES
• Reset firmware GUI button
• HW reset button (press for 10 seconds)
FLASH ROM
• 128 MB
RAM
• 1024 MB DDRIII
NIC
• Gigabit Ethernet LAN port (10/100/1000 Mbps)
I/O PORTS
• 1 x 10/100/1000BASE-T RJ-45 port
• 4 x 10/100BASE-T PoE port (802.3af)
• HDMI (supports 720p and 1080p resolution with 16:9 display ratio)
• D-sub for VGA output
• 3.5 mm audio in/out ports
• 1 x USB 3.0 port
• 1 x USB 2.0 port
• 3.5 mm audio input x 1, output x 1
• 4 x DI, 1 x DO
POWER ADAPTER
• 48 V DC, 1.85 A
RESET BUTTON
• Reset to factory default
POWER CONSUMPTION
• Max. power consumption: 90 W
DIMENSIONS W x D x H
• 300 x 225 x 63 (W x D x H) mm (11.81 x 8.86 x 2.48 inches)
WEIGHT
• 2.1 kg (4.63 lbs)
OPERATING TEMPERATURE
• Operating: 0 to 40 ˚C (32 to 104 ˚F)
• Storage: -20 to 70 ˚C (-4 to 158 ˚F)
HUMIDITY
• Operating: 5% to 90% (non-condensing)
PACKAGE CONTENTS
• Network Video Recorder
• Hard disk screw x 8
• Rack-mount bracket x 2
65D-Link DNR-2020-04P User Manual
Appendix A - Technical Specications
• Rack-mount bracket screw x 8
• Power adapter x 1
• Power adapter cable
• Ethernet cable
• Quick Install Guide
• CD-ROM with applications and product documentation
66D-Link DNR-2020-04P User Manual
Appendix B - Regulatory Statements
Regulatory Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
Non-modication Statement
Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
CE EMI Class A Warning
This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference.
Innovation, Science and Economic Development Canada (ISED) Statement:
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
67D-Link DNR-2020-04P User Manual
Appendix B - Regulatory Statements
SAFETY INSTRUCTIONS
The following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage.
Remember to consult the product user instructions for more details.
• Static electricity can be harmful to electronic components. Discharge static electricity from your body (i.e. touching grounded bare metal)
before touching the product.
• Do not attempt to service the product and never disassemble the product. For some products with a user replaceable battery, please read
and follow the instructions in the user manual.
• Do not spill food or liquid on your product and never push any objects into the openings of your product.
• Do not use this product near water, areas with high humidity, or condensation unless the product is specically rated for outdoor application.
• Keep the product away from radiators and other heat sources.
• Always unplug the product from mains power before cleaning and use a dry lint free cloth only.
SICHERHEITSVORSCHRIFTEN
Die folgenden allgemeinen Sicherheitsvorschriften dienen als Hilfe zur Gewährleistung Ihrer eigenen Sicherheit und zum Schutz Ihres Produkts.
Weitere Details nden Sie in den Benutzeranleitungen zum Produkt.
• Statische Elektrizität kann elektronischen Komponenten schaden. Um Schäden durch statische Auadung zu vermeiden, leiten Sie
elektrostatische Ladungen von Ihrem Körper ab,
(z. B. durch Berühren eines geerdeten blanken Metallteils), bevor Sie das Produkt berühren.
• Unterlassen Sie jeden Versuch, das Produkt zu warten, und versuchen Sie nicht, es in seine Bestandteile zu zerlegen. Für einige Produkte mit
austauschbaren Akkus lesen Sie bitte das Benutzerhandbuch und befolgen Sie die dort beschriebenen Anleitungen.
• Vermeiden Sie, dass Speisen oder Flüssigkeiten auf Ihr Produkt gelangen, und stecken Sie keine Gegenstände in die Gehäuseschlitze oder
-önungen Ihres Produkts.
• Verwenden Sie dieses Produkt nicht in unmittelbarer Nähe von Wasser und nicht in Bereichen mit hoher Luftfeuchtigkeit oder Kondensation,
es sei denn, es ist speziell zur Nutzung in Außenbereichen vorgesehen und eingestuft.
• Halten Sie das Produkt von Heizkörpern und anderen Quellen fern, die Wärme erzeugen.
• Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschließlich ein trockenes fusselfreies
Tuch.
CONSIGNES DE SÉCURITÉ
Les consignes générales de sécurité ci-après sont fournies an d’assurer votre sécurité personnelle et de protéger le produit d’éventuels
dommages. Veuillez consulter les consignes d’utilisation du produit pour plus de détails.
• L’électricité statique peut endommager les composants électroniques. Déchargez l’électricité statique de votre corps (en touchant un objet
en métal relié à la terre par exemple) avant de toucher le produit.
• N’essayez pas d’intervenir sur le produit et ne le démontez jamais. Pour certains produits contenant une batterie remplaçable par l’utilisateur,
68D-Link DNR-2020-04P User Manual
Appendix B - Regulatory Statements
• veuillez lire et suivre les consignes contenues dans le manuel d’utilisation.
• Ne renversez pas d’aliments ou de liquide sur le produit et n’insérez jamais d’objets dans les orices.
• N’utilisez pas ce produit à proximité d’un point d’eau, de zones très humides ou de condensation sauf si le produit a été spéciquement
conçu pour une application extérieure.
• Éloignez le produit des radiateurs et autres sources de chaleur.
• Débranchez toujours le produit de l’alimentation avant de le nettoyer et utilisez uniquement un chion sec non pelucheux.
INSTRUCCIONES DE SEGURIDAD
Las siguientes directrices de seguridad general se facilitan para ayudarle a garantizar su propia seguridad personal y para proteger el producto
frente a posibles daños. No olvide consultar las instrucciones del usuario del producto para obtener más información.
• La electricidad estática puede resultar nociva para los componentes electrónicos. Descargue la electricidad estática de su cuerpo (p. ej.,
tocando algún metal sin revestimiento conectado a tierra) antes de tocar el producto.
• No intente realizar el mantenimiento del producto ni lo desmonte nunca. Para algunos productos con batería reemplazable por el usuario,
lea y siga las instrucciones del manual de usuario.
• No derrame comida o líquidos sobre el producto y nunca deje que caigan objetos en las aberturas del mismo.
• No utilice este producto cerca del agua, en zonas con humedad o condensación elevadas a menos que el producto esté clasicado
especícamente para aplicación en exteriores.
• Mantenga el producto alejado de los radiadores y de otras fuentes de calor.
• Desenchufe siempre el producto de la alimentación de red antes de limpiarlo y utilice solo un paño seco sin pelusa"
ISTRUZIONI PER LA SICUREZZA
Las siguientes directrices de seguridad general se facilitan para ayudarle a garantizar su propia seguridad personal y para proteger el producto
frente a posibles daños. No olvide consultar las instrucciones del usuario del producto para obtener más información.
• La electricidad estática puede resultar nociva para los componentes electrónicos. Descargue la electricidad estática de su cuerpo (p. ej.,
tocando algún metal sin revestimiento conectado a tierra) antes de tocar el producto.
• No intente realizar el mantenimiento del producto ni lo desmonte nunca. Para algunos productos con batería reemplazable por el usuario,
lea y siga las instrucciones del manual de usuario.
• No derrame comida o líquidos sobre el producto y nunca deje que caigan objetos en las aberturas del mismo.
• No utilice este producto cerca del agua, en zonas con humedad o condensación elevadas a menos que el producto esté clasicado
especícamente para aplicación en exteriores.
• Mantenga el producto alejado de los radiadores y de otras fuentes de calor.
• Desenchufe siempre el producto de la alimentación de red antes de limpiarlo y utilice solo un paño seco sin pelusa"
69D-Link DNR-2020-04P User Manual
Appendix B - Regulatory Statements
VEILIGHEIDSINFORMATIE
De volgende algemene veiligheidsinformatie werd verstrekt om uw eigen persoonlijke veiligheid te waarborgen en uw product te beschermen
tegen mogelijke schade. Denk eraan om de gebruikersinstructies van het product te raadplegen voor meer informatie.
• Statische elektriciteit kan schadelijk zijn voor elektronische componenten. Ontlaad de statische elektriciteit van uw lichaam (d.w.z. het
aanraken van geaard bloot metaal) voordat uhet product aanraakt.
• U mag nooit proberen het product te onderhouden en u mag het product nooit demonteren. Voor sommige producten met door de
gebruiker te vervangen batterij, dient u de instructies in de gebruikershandleiding te lezen en te volgen.
• Mors geen voedsel of vloeistof op uw product en u mag nooit voorwerpen in de openingen van uw product duwen.
• Gebruik dit product niet in de buurt van water, gebieden met hoge vochtigheid of condensatie, tenzij het product speciek geclassiceerd is
voor gebruik buitenshuis.
• Houd het product uit de buurt van radiators en andere warmtebronnen.
• U dient het product steeds los te koppelen van de stroom voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek"
70D-Link DNR-2020-04P User Manual
Appendix B - Regulatory Statements
Disposing and Recycling Your Product
ENGLISH EN
This symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed
of in household waste but sent for recycling. Please take it to a collection point designated by your local authorities once it has
reached the end of its life, some will accept products for free. By recycling the product and its packaging in this manner you help to
conserve the environment and protect human health.
D-Link and the Environment
At D-Link, we understand and are committed to reducing any impact our operations and products may have on the environment. To minimise
this impact D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both
products and packaging.
D-Link recommends that you always switch o or unplug your D-Link products when they are not in use. By doing so you will help to save energy
and reduce CO2 emissions.
To learn more about our environmentally responsible products and packaging please visit www.dlinkgreen.com.
DEUTSCH DE
Dieses Symbol auf dem Produkt oder der Verpackung weist darauf hin, dass dieses Produkt gemäß bestehender örtlicher Gesetze
und Vorschriften nicht über den normalen Hausmüll entsorgt werden sollte, sondern einer Wiederverwertung zuzuführen ist. Bringen
Sie es bitte zu einer von Ihrer Kommunalbehörde entsprechend amtlich ausgewiesenen Sammelstelle, sobald das Produkt das Ende
seiner Nutzungsdauer erreicht hat. Für die Annahme solcher Produkte erheben einige dieser Stellen keine Gebühren. Durch ein auf
diese Weise durchgeführtes Recycling des Produkts und seiner Verpackung helfen Sie, die Umwelt zu schonen und die menschliche
Gesundheit zu schützen.
D-Link und die Umwelt
D-Link ist sich den möglichen Auswirkungen seiner Geschäftstätigkeiten und seiner Produkte auf die Umwelt bewusst und fühlt sich verpichtet,
diese entsprechend zu mindern. Zu diesem Zweck entwickelt und stellt D-Link seine Produkte mit dem Ziel größtmöglicher Umweltfreundlichkeit
her und verwendet wiederverwertbare, schadstoarme Materialien bei Produktherstellung und Verpackung.
D-Link empehlt, Ihre Produkte von D-Link, wenn nicht in Gebrauch, immer auszuschalten oder vom Netz zu nehmen. Auf diese Weise helfen
Sie, Energie zu sparen und CO2-Emissionen zu reduzieren.
Wenn Sie mehr über unsere umweltgerechten Produkte und Verpackungen wissen möchten, nden Sie entsprechende Informationen im Internet
unter www.dlinkgreen.com.
71D-Link DNR-2020-04P User Manual
Appendix B - Regulatory Statements
FRANÇAIS FR
Ce symbole apposé sur le produit ou son emballage signie que, conformément aux lois et règlementations locales, ce produit ne
doit pas être éliminé avec les déchets domestiques mais recyclé. Veuillez le rapporter à un point de collecte prévu à cet eet par les
autorités locales; certains accepteront vos produits gratuitement. En recyclant le produit et son emballage de cette manière, vous
aidez à préserver l’environnement et à protéger la santé de l’homme.
D-Link et l’environnement
Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons à le réduire. Pour limiter
cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en utilisant des matériaux recyclables et faiblement
toxiques, tant dans ses produits que ses emballages.
D-Link recommande de toujours éteindre ou débrancher vos produits D-Link lorsque vous ne les utilisez pas. Vous réaliserez ainsi des économies
d’énergie et réduirez vos émissions de CO2.
Pour en savoir plus sur les produits et emballages respectueux de l’environnement, veuillez consulter le www.dlinkgreen.com.
ESPAÑOL ES
Este símbolo en el producto o el embalaje signica que, de acuerdo con la legislación y la normativa local, este producto no se debe
desechar en la basura doméstica sino que se debe reciclar. Llévelo a un punto de recogida designado por las autoridades locales una
vez que ha llegado al n de su vida útil; algunos de ellos aceptan recogerlos de forma gratuita. Al reciclar el producto y su embalaje
de esta forma, contribuye a preservar el medio ambiente y a proteger la salud de los seres humanos.
D-Link y el medio ambiente
En D-Link, comprendemos y estamos comprometidos con la reducción del impacto que puedan tener nuestras actividades y nuestros productos
en el medio ambiente. Para reducir este impacto, D-Link diseña y fabrica sus productos para que sean lo más ecológicos posible, utilizando
materiales reciclables y de baja toxicidad tanto en los productos como en el embalaje.
D-Link recomienda apagar o desenchufar los productos D-Link cuando no se estén utilizando. Al hacerlo, contribuirá a ahorrar energía y a reducir
las emisiones de CO2.
Para obtener más información acerca de nuestros productos y embalajes ecológicos, visite el sitio www.dlinkgreen.com.
72D-Link DNR-2020-04P User Manual
Appendix B - Regulatory Statements
ITALIANO IT
La presenza di questo simbolo sul prodotto o sulla confezione del prodotto indica che, in conformità alle leggi e alle normative locali,
questo prodotto non deve essere smaltito nei riuti domestici, ma avviato al riciclo. Una volta terminato il ciclo di vita utile, portare il
prodotto presso un punto di raccolta indicato dalle autorità locali. Alcuni questi punti di raccolta accettano gratuitamente i prodotti
da riciclare. Scegliendo di riciclare il prodotto e il relativo imballaggio, si contribuirà a preservare l'ambiente e a salvaguardare la
salute umana.
D-Link e l'ambiente
D-Link cerca da sempre di ridurre l'impatto ambientale dei propri stabilimenti e dei propri prodotti. Allo scopo di ridurre al minimo tale impatto,
D-Link progetta e realizza i propri prodotti in modo che rispettino il più possibile l'ambiente, utilizzando materiali riciclabili a basso tasso di
tossicità sia per i prodotti che per gli imballaggi.
D-Link raccomanda di spegnere sempre i prodotti D-Link o di scollegarne la spina quando non vengono utilizzati. In questo modo si contribuirà
a risparmiare energia e a ridurre le emissioni di anidride carbonica.
Per ulteriori informazioni sui prodotti e sugli imballaggi D-Link a ridotto impatto ambientale, visitate il sito all'indirizzo www.dlinkgreen.com.
NEDERLANDS NL
Dit symbool op het product of de verpakking betekent dat dit product volgens de plaatselijke wetgeving niet mag worden weggegooid
met het huishoudelijk afval, maar voor recyclage moeten worden ingeleverd. Zodra het product het einde van de levensduur heeft
bereikt, dient u het naar een inzamelpunt te brengen dat hiertoe werd aangeduid door uw plaatselijke autoriteiten, sommige
autoriteiten accepteren producten zonder dat u hiervoor dient te betalen. Door het product en de verpakking op deze manier te
recyclen helpt u het milieu en de gezondheid van de mens te beschermen.
D-Link en het milieu
Bij D-Link spannen we ons in om de impact van onze handelingen en producten op het milieu te beperken. Om deze impact te beperken, ontwerpt
en bouwt D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en
verpakking.
D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart
u energie en beperkt u de CO2-emissies.
Breng een bezoek aan www.dlinkgreen.com voor meer informatie over onze milieuverantwoorde producten en verpakkingen.
73D-Link DNR-2020-04P User Manual
Appendix B - Regulatory Statements
POLSKI PL
Ten symbol umieszczony na produkcie lub opakowaniu oznacza, że zgodnie z miejscowym prawem i lokalnymi przepisami
niniejszego produktu nie wolno wyrzucać jak odpady czy śmieci z gospodarstwa domowego, lecz należy go poddać procesowi
recyklingu. Po zakończeniu użytkowania produktu, niektóre odpowiednie do tego celu podmioty przyjmą takie produkty
nieodpłatnie, dlatego prosimy dostarczyć go do punktu zbiórki wskazanego przez lokalne władze. Poprzez proces recyklingu i
dzięki takiemu postępowaniu z produktem oraz jego opakowaniem, pomogą Państwo chronić środowisko naturalne i dbać o
ludzkie zdrowie.
D-Link i środowisko
D-Link podchodzimy w sposób świadomy do ochrony otoczenia oraz jesteśmy zaangażowani w zmniejszanie wpływu naszych działań i produktów
na środowisko naturalne. W celu zminimalizowania takiego wpływu rma D-Link konstruuje i wytwarza swoje produkty w taki sposób, aby były
one jak najbardziej przyjazne środowisku, stosując do tych celów materiały nadające się do powtórnego wykorzystania, charakteryzujące się
małą toksycznością zarówno w przypadku samych produktów jak i opakowań.
Firma D-Link zaleca, aby Państwo zawsze prawidłowo wyłączali z użytku swoje produkty D-Link, gdy nie są one wykorzystywane. Postępując w
ten sposób pozwalają Państwo oszczędzać energię i zmniejszać emisje CO2.
Aby dowiedzieć się więcej na temat produktów i opakowań mających wpływ na środowisko prosimy zapoznać się ze stroną Internetową www.
dlinkgreen.com.
ČESKY CZ
Tento symbol na výrobku nebo jeho obalu znamená, že podle místně platných předpisů se výrobek nesmí vyhazovat do komunálního
odpadu, ale odeslat k recyklaci. Až výrobek doslouží, odneste jej prosím na sběrné místo určené místními úřady k tomuto účelu.
Některá sběrná místa přijímají výrobky zdarma. Recyklací výrobku i obalu pomáháte chránit životní prostředí i lidské zdraví.
D-Link a životní prostředí
Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své
výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.
Společnost D-Link doporučuje, abyste své výrobky značky D-Link vypnuli nebo vytáhli ze zásuvky vždy, když je nepoužíváte. Pomůžete tak šetřit
energii a snížit emise CO2.
Více informací o našich ekologických výrobcích a obalech najdete na adrese www.dlinkgreen.com.
74D-Link DNR-2020-04P User Manual
Appendix B - Regulatory Statements
MAGYAR HU
Ez a szimbólum a terméken vagy a csomagoláson azt jelenti, hogy a helyi törvényeknek és szabályoknak megfelelően ez a termék
nem semmisíthető meg a háztartási hulladékkal együtt, hanem újrahasznosításra kell küldeni. Kérjük, hogy a termék élettartamának
elteltét követően vigye azt a helyi hatóság által kijelölt gyűjtőhelyre. A termékek egyes helyeken ingyen elhelyezhetők. A termék és
a csomagolás újrahasznosításával segíti védeni a környezetet és az emberek egészségét.
A D-Link és a környezet
A D-Linknél megértjük és elkötelezettek vagyunk a műveleteink és termékeink környezetre gyakorolt hatásainak csökkentésére. Az ezen hatás
csökkentése érdekében a D-Link a lehető leginkább környezetbarát termékeket tervez és gyárt azáltal, hogy újrahasznosítható, alacsony károsanyag-
tartalmú termékeket gyárt és csomagolásokat alkalmaz.
A D-Link azt javasolja, hogy mindig kapcsolja ki vagy húzza ki a D-Link termékeket a tápforrásból, ha nem használja azokat. Ezzel segít az energia
megtakarításában és a széndioxid kibocsátásának csökkentésében.
Környezetbarát termékeinkről és csomagolásainkról további információkat a www.dlinkgreen.com weboldalon tudhat meg.
NORSK NO
Dette symbolet på produktet eller forpakningen betyr at dette produktet ifølge lokale lover og forskrifter ikke skal kastes sammen
med husholdningsavfall, men leveres inn til gjenvinning. Vennligst ta det til et innsamlingssted anvist av lokale myndigheter når
det er kommet til slutten av levetiden. Noen steder aksepteres produkter uten avgift. Ved på denne måten å gjenvinne produktet
og forpakningen hjelper du å verne miljøet og beskytte folks helse.
D-Link og miljøet
Hos D-Link forstår vi oss på og er forpliktet til å minske innvirkningen som vår drift og våre produkter kan ha på miljøet. For å minimalisere denne
innvirkningen designer og lager D-Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav-toksiske materialer både i
produktene og forpakningen.
D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere
CO2-utslipp.
For mer informasjon angående våre miljøansvarlige produkter og forpakninger kan du gå til www.dlinkgreen.com.
75D-Link DNR-2020-04P User Manual
Appendix B - Regulatory Statements
DANSK DK
Dette symbol på produktet eller emballagen betyder, at dette produkt i henhold til lokale love og regler ikke må bortskaes som
husholdningsaald, mens skal sendes til genbrug. Indlever produktet til et indsamlingssted som angivet af de lokale myndigheder,
når det er nået til slutningen af dets levetid. I nogle tilfælde vil produktet blive modtaget gratis. Ved at indlevere produktet og dets
emballage til genbrug på denne måde bidrager du til at beskytte miljøet og den menneskelige sundhed.
D-Link og miljøet
Hos D-Link forstår vi og bestræber os på at reducere enhver indvirkning, som vores aktiviteter og produkter kan have på miljøet. For at minimere
denne indvirkning designer og producerer D-Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer
med lavt giftighedsniveau i både produkter og emballage.
D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og
reducere CO2-udledningerne.
Du kan nde ere oplysninger om vores miljømæssigt ansvarlige produkter og emballage på www.dlinkgreen.com.
SUOMI FI
Tämä symboli tuotteen pakkauksessa tarkoittaa, että paikallisten lakien ja säännösten mukaisesti tätä tuotetta ei pidä hävittää
yleisen kotitalousjätteen seassa vaan se tulee toimittaa kierrätettäväksi. Kun tuote on elinkaarensa päässä, toimita se lähimpään
viranomaisten hyväksymään kierrätyspisteeseen. Kierrättämällä käytetyn tuotteen ja sen pakkauksen autat tukemaan sekä ympäristön
että ihmisten terveyttä ja hyvinvointia.
D-Link ja ympäristö
D-Link ymmärtää ympäristönsuojelun tärkeyden ja on sitoutunut vähentämään tuotteistaan ja niiden valmistuksesta ympäristölle mahdollisesti
aiheutuvia haittavaikutuksia. Nämä negatiiviset vaikutukset minimoidakseen D-Link suunnittelee ja valmistaa tuotteensa mahdollisimman
ympäristöystävällisiksi käyttämällä kierrätettäviä, alhaisia pitoisuuksia haitallisia aineita sisältäviä materiaaleja sekä tuotteissaan että niiden
pakkauksissa.
Suosittelemme, että irrotat D-Link-tuotteesi virtalähteestä tai sammutat ne aina, kun ne eivät ole käytössä. Toimimalla näin autat säästämään
energiaa ja vähentämään hiilidioksiidipäästöjä.
Lue lisää ympäristöystävällisistä D-Link-tuotteista ja pakkauksistamme osoitteesta www.dlinkgreen.com.
76D-Link DNR-2020-04P User Manual
Appendix B - Regulatory Statements
SVENSKA SE
Den här symbolen på produkten eller förpackningen betyder att produkten enligt lokala lagar och föreskrifter inte skall kastas i
hushållssoporna utan i stället återvinnas. Ta den vid slutet av dess livslängd till en av din lokala myndighet utsedd uppsamlingsplats,
vissa accepterar produkter utan kostnad. Genom att på detta sätt återvinna produkten och förpackningen hjälper du till att bevara
miljön och skydda människors hälsa.
D-Link och miljön
På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och produkter kan ha på miljön. För att minska denna påverkan
utformar och bygger D-Link sina produkter för att de ska vara så miljövänliga som möjligt, genom att använda återvinningsbara material med
låg gifthalt i både produkter och förpackningar.
D-Link rekommenderar att du alltid stänger av eller kopplar ur dina D-Link produkter när du inte använder dem. Genom att göra detta hjälper
du till att spara energi och minska utsläpp av koldioxid.
För mer information om våra miljöansvariga produkter och förpackningar www.dlinkgreen.com.
PORTUGUÊS PT
Este símbolo no produto ou embalagem signica que, de acordo com as leis e regulamentações locais, este produto não deverá ser
eliminado juntamente com o lixo doméstico mas enviado para a reciclagem. Transporte-o para um ponto de recolha designado pelas
suas autoridades locais quando este tiver atingido o m da sua vida útil, alguns destes pontos aceitam produtos gratuitamente. Ao
reciclar o produto e respectiva embalagem desta forma, ajuda a preservar o ambiente e protege a saúde humana.
A D-Link e o ambiente
Na D-Link compreendemos e comprometemo-nos com a redução do impacto que as nossas operações e produtos possam ter no ambiente.
Para minimizar este impacto a D-Link concebe e constrói os seus produtos para que estes sejam o mais inofensivos para o ambiente possível,
utilizando meteriais recicláveis e não tóxicos tanto nos produtos como nas embalagens.
A D-Link recomenda que desligue os seus produtos D-Link quando estes não se encontrarem em utilização. Com esta acção ajudará a poupar
energia e reduzir as emissões de CO2.
Para saber mais sobre os nossos produtos e embalagens responsáveis a nível ambiental visite www.dlinkgreen.com.