Table of Contents
- Dell Chromebook 3100 2-in-1 Service Manual
- Working on your computer
- Technology and components
- Major components of your system
- Removing and Installing
- Troubleshooting
- Getting help
DELL 3100 User Manual
Displayed below is the user manual for 3100 by DELL which is a product in the Notebooks category. This manual has pages.
Related Manuals
Dell Chromebook 3100 2-in-1
Service Manual
Regulatory Model: P30T
Regulatory Type: P30T001
Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your product.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
© 2017 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its
subsidiaries. Other trademarks may be trademarks of their respective owners.
2019 - 06
Rev. A02
1 Working on your computer............................................................................................................ 5
Safety instructions................................................................................................................................................................ 5
Storing Chromebooks for long term - best practices.......................................................................................................5
Before working inside your computer................................................................................................................................. 6
After working inside your computer....................................................................................................................................6
2 Technology and components......................................................................................................... 7
USB features.......................................................................................................................................................................... 7
Keyboard.................................................................................................................................................................................9
Keyboard keys function...................................................................................................................................................9
Touchpad.............................................................................................................................................................................. 10
Bluetooth................................................................................................................................................................................11
3 Major components of your system ............................................................................................... 12
4 Removing and Installing...............................................................................................................14
microSD card........................................................................................................................................................................ 14
Removing microSD card................................................................................................................................................14
Installing microSD card.................................................................................................................................................. 14
Base cover............................................................................................................................................................................ 15
Removing the base cover..............................................................................................................................................15
Installing the base cover................................................................................................................................................ 17
Battery...................................................................................................................................................................................19
Lithium-ion battery precautions................................................................................................................................... 19
Removing the battery................................................................................................................................................... 20
Installing the battery......................................................................................................................................................22
Speaker.................................................................................................................................................................................25
Removing the speakers................................................................................................................................................ 25
Installing the speakers................................................................................................................................................... 27
Input Output board..............................................................................................................................................................30
Removing the Input and output board........................................................................................................................30
Installing Input output board.........................................................................................................................................32
Keyboard lattice and Keyboard..........................................................................................................................................34
Removing the keyboard................................................................................................................................................34
Installing the keyboard...................................................................................................................................................37
System board.......................................................................................................................................................................39
Removing the system board........................................................................................................................................ 39
Installing system board..................................................................................................................................................43
World facing camera........................................................................................................................................................... 48
Removing world facing camera................................................................................................................................... 48
Installing world facing camera......................................................................................................................................49
Display assembly..................................................................................................................................................................50
Removing display assembly..........................................................................................................................................50
Installing display assembly............................................................................................................................................ 53
Contents
Contents 3
Display panel-Touch............................................................................................................................................................56
Removing display panel-Touch.................................................................................................................................... 56
Installing display panel-Touch...................................................................................................................................... 58
Camera................................................................................................................................................................................. 60
Removing camera..........................................................................................................................................................60
Installing camera............................................................................................................................................................. 61
Display cable.........................................................................................................................................................................62
Removing display cable.................................................................................................................................................62
Installing display cable................................................................................................................................................... 64
Display hinges.......................................................................................................................................................................66
Removing display hinge................................................................................................................................................ 66
Installing display hinge...................................................................................................................................................68
Palm rest...............................................................................................................................................................................70
Replacing palmrest assembly....................................................................................................................................... 70
5 Troubleshooting......................................................................................................................... 72
Basic troubleshooting..........................................................................................................................................................72
Power issues...................................................................................................................................................................72
CROSH..................................................................................................................................................................................76
CROSH commands............................................................................................................................................................. 76
Chrome commands............................................................................................................................................................. 78
Commonly used CROSH command.................................................................................................................................. 84
Check battery charging status.................................................................................................................................... 84
Reset Chromebook.............................................................................................................................................................. 91
Recovery Chromebook....................................................................................................................................................... 94
Recovering the Chromebook....................................................................................................................................... 94
6 Getting help...............................................................................................................................97
Contacting Dell.....................................................................................................................................................................97
4Contents
Working on your computer
Safety instructions
Prerequisites
Use the following safety guidelines to protect your computer from potential damage and to ensure your personal safety. Unless otherwise
noted, each procedure included in this document assumes that the following conditions exist:
• You have read the safety information that shipped with your computer.
• A component can be replaced or, if purchased separately, installed by performing the removal procedure in reverse order.
About this task
NOTE: Disconnect all power sources before opening the computer cover or panels. After you finish working inside the
computer, replace all covers, panels, and screws before connecting to the power source.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For
additional safety best practices information, see the Regulatory Compliance Homepage
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that came with the product.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface at the same time as touching a connector on the back of the computer.
CAUTION: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a card by
its edges or by its metal mounting bracket. Hold a component such as a processor by its edges, not by its pins.
CAUTION: When you disconnect a cable, pull on its connector or on its pull-tab, not on the cable itself. Some cables
have connectors with locking tabs; if you are disconnecting this type of cable, press in on the locking tabs before you
disconnect the cable. As you pull connectors apart, keep them evenly aligned to avoid bending any connector pins. Also,
before you connect a cable, ensure that both connectors are correctly oriented and aligned.
NOTE: The color of your computer and certain components may appear differently than shown in this document.
Storing Chromebooks for long term - best
practices
Prior to long term (Summer) storage:
1. Update to the latest version of the Chrome OS and charge your Chromebooks so that the battery is at least 80% full.
a. This ensures that even when the battery discharges while unplugged over the summer, it will not fully run out of power.
2. Connect the device to a charger and then turn it on.
3. Hold Refresh and Power keys at the same time.
4. While holding these keys, remove the power cable from the device and then release the keys. The device should shut down and
remain off.
5. Attempt to power the unit on, by pressing the power button. If the unit does not power on, you have completed the steps and can
safely store the system. If the unit powers on, you should repeat steps 2 to 4.
Upon redeploying:
1
Working on your computer 5
1. Connect the Chromebooks to a charger and a power source, which will get them out of the battery disconnect state. Power up your
device.
2. Connect your Chromebooks to WiFi and update them to the latest Chrome OS release.
a. This can take time, as multiple Chrome OS versions may have been released since the last time the device was updated.
Before working inside your computer
About this task
To avoid damaging your computer, perform the following steps before you begin working inside the computer.
Steps
1. Ensure that you follow the Safety Instruction.
2. Ensure that your work surface is flat and clean to prevent the computer cover from being scratched.
3. Turn off your computer.
4. Disconnect all network cables from the computer.
CAUTION: To disconnect a network cable, first unplug the cable from your computer and then unplug the cable from
the network device.
5. Disconnect your computer and all attached devices from their electrical outlets.
6. Press and hold the power button while the computer is unplugged to ground the system board.
NOTE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface at the same time as touching a connector on the back of the computer.
After working inside your computer
About this task
After you complete any replacement procedure, ensure that you connect any external devices, cards, and cables before turning on your
computer.
Steps
1. Connect any telephone or network cables to your computer.
CAUTION: To connect a network cable, first plug the cable into the network device and then plug it into the
computer.
2. Connect your computer and all attached devices to their electrical outlets.
3. Turn on your computer.
4. If required, verify that the computer works correctly by running ePSA diagnostics.
6Working on your computer
Technology and components
NOTE: Instructions provided in this section are applicable on computers shipped with Windows 10 operating system.
Windows 10 is factory-installed with this computer.
Topics:
•USB features
•Keyboard
•Touchpad
•Bluetooth
USB features
Universal Serial Bus, or USB, was introduced in 1996. It dramatically simplified the connection between host computers and peripheral
devices like mice, keyboards, external drivers, and printers.
Let's take a quick look on the USB evolution referencing to the table below.
Table 1. USB evolution
Type Data Transfer Rate Category Introduction Year
USB 2.0 480 Mbps High Speed 2000
USB 3.0/USB 3.1 Gen 1 5 Gbps Super Speed 2010
USB 3.1 Gen 2 10 Gbps Super Speed 2013
USB 3.0/USB 3.1 Gen 1 (SuperSpeed USB)
For years, the USB 2.0 has been firmly entrenched as the de facto interface standard in the PC world with about 6 billion devices sold, and
yet the need for more speed grows by ever faster computing hardware and ever greater bandwidth demands. The USB 3.0/USB 3.1 Gen 1
finally has the answer to the consumers' demands with a theoretically 10 times faster than its predecessor. In a nutshell, USB 3.1 Gen 1
features are as follows:
• Higher transfer rates (up to 5 Gbps)
• Increased maximum bus power and increased device current draw to better accommodate power-hungry devices
• New power management features
• Full-duplex data transfers and support for new transfer types
• Backward USB 2.0 compatibility
• New connectors and cable
The topics below cover some of the most commonly asked questions regarding USB 3.0/USB 3.1 Gen 1.
Speed
Currently, there are 3 speed modes defined by the latest USB 3.0/USB 3.1 Gen 1 specification. They are Super-Speed, Hi-Speed and Full-
Speed. The new SuperSpeed mode has a transfer rate of 4.8Gbps. While the specification retains Hi-Speed, and Full-Speed USB mode,
commonly known as USB 2.0 and 1.1 respectively, the slower modes still operate at 480Mbps and 12Mbps respectively and are kept to
maintain backward compatibility.
2
Technology and components 7
USB 3.0/USB 3.1 Gen 1 achieves the much higher performance by the technical changes below:
• An additional physical bus that is added in parallel with the existing USB 2.0 bus (refer to the picture below).
• USB 2.0 previously had four wires (power, ground, and a pair for differential data); USB 3.0/USB 3.1 Gen 1 adds four more for two
pairs of differential signals (receive and transmit) for a combined total of eight connections in the connectors and cabling.
• USB 3.0/USB 3.1 Gen 1 utilizes the bidirectional data interface, rather than USB 2.0's half-duplex arrangement. This gives a 10-fold
increase in theoretical bandwidth.
With today's ever increasing demands placed on data transfers with high-definition video content, terabyte storage devices, high
megapixel count digital cameras etc., USB 2.0 may not be fast enough. Furthermore, no USB 2.0 connection could ever come close to the
480Mbps theoretical maximum throughput, making data transfer at around 320Mbps (40MB/s) — the actual real-world maximum.
Similarly, USB 3.0/USB 3.1 Gen 1 connections will never achieve 4.8Gbps. We will likely see a real-world maximum rate of 400MB/s with
overheads. At this speed, USB 3.0/USB 3.1 Gen 1 is a 10x improvement over USB 2.0.
Applications
USB 3.0/USB 3.1 Gen 1 opens up the laneways and provides more headroom for devices to deliver a better overall experience. Where USB
video was barely tolerable previously (both from a maximum resolution, latency, and video compression perspective), it's easy to imagine
that with 5-10 times the bandwidth available, USB video solutions should work that much better. Single-link DVI requires almost 2Gbps
throughput. Where 480Mbps was limiting, 5Gbps is more than promising. With its promised 4.8Gbps speed, the standard will find its way
into some products that previously weren't USB territory, like external RAID storage systems.
Listed below are some of the available SuperSpeed USB 3.0/USB 3.1 Gen 1 products:
• External Desktop USB 3.0/USB 3.1 Gen 1 Hard Drives
• Portable USB 3.0/USB 3.1 Gen 1 Hard Drives
• USB 3.0/USB 3.1 Gen 1 Drive Docks & Adapters
• USB 3.0/USB 3.1 Gen 1 Flash Drives & Readers
• USB 3.0/USB 3.1 Gen 1 Solid-state Drives
• USB 3.0/USB 3.1 Gen 1 RAIDs
• Optical Media Drives
• Multimedia Devices
• Networking
• USB 3.0/USB 3.1 Gen 1 Adapter Cards & Hubs
Compatibility
The good news is that USB 3.0/USB 3.1 Gen 1 has been carefully planned from the start to peacefully co-exist with USB 2.0. First of all,
while USB 3.0/USB 3.1 Gen 1 specifies new physical connections and thus new cables to take advantage of the higher speed capability of
the new protocol, the connector itself remains the same rectangular shape with the four USB 2.0 contacts in the exact same location as
before. Five new connections to carry receive and transmitted data independently are present on USB 3.0/USB 3.1 Gen 1 cables and only
come into contact when connected to a proper SuperSpeed USB connection.
Windows 10 will be bringing native support for USB 3.1 Gen 1 controllers. This is in contrast to previous versions of Windows, which
continue to require separate drivers for USB 3.0/USB 3.1 Gen 1 controllers.
8Technology and components
Keyboard
Dell keyboards have a few extra features to help you browse the web effortlessly and efficiently. The keyboard contains a dedicated
search key and a new row of web shortcut keys. A standard USB Windows keyboard can also be used with the Chromebook, using the
same keyboard shortcuts. The image below shows the keyboard layout.
Keyboard keys function
The Chrome device keyboard is designed to help you get to the things you need the most. The table below is an overview of the special
keys on the top row of the keyboard:
Table 2. Special keys
Special keys
Go to the previous page in browser history
Go to the next page in browser history
Reload current page
Enter Immersive mode, which hides the tabs and launcher
Enter Overview mode, which shows all windows
Decrease screen brightness
Increase screen brightness
Mute
Decrease the volume
Increase the volume
Search applications and the web at the same time. On a Chromebook, this key is on the side, where the Caps Lock
key is normally located.
Keyboard shortcut keys
Table 3. Shortcut keys
Shortcut keys
Function Combination keys
Page up Press Alt and the up arrow
Technology and components 9
Shortcut keys
Page down Press Alt and the down arrow
Home Press Ctrl+Alt, and the up arrow
End Press, Ctrl+Alt and the down arrow
Delete Press Alt+Backspace
Toggle the bookmark bar Ctrl+Shift+B
Search current webpage Ctrl+F
Open a new tab Ctrl+T
Open a new window Ctrl+N
Open the link you clicked in a new background tab Press Alt and click a link
Switch to next tab Ctrl+Tab
Sign out of Google Account Ctrl+Shift+Q
Close current tab Ctrl+W
To see more shortcuts, simply press Ctrl+Alt+? To open the keyboard viewer on your screen.
Touchpad
This page contains information for Dell touchpad gestures.
The following table lists some gestures and actions supported by the Chromebook touchpad:
Table 4. Touch pad gestures
Touchpad gestures
Gestures Explanation
Simply move your finger across the touchpad.
Press down on the lower half of the touchpad. Since tap-to-click is enabled by default, you can quickly tap
the touchpad to click.
Click the touchpad with two fingers.
10 Technology and components
Touchpad gestures
Place two fingers on the touchpad and move them up and down to scroll vertically, left and right to scroll
horizontally. If you have Australian scrolling enabled, move two fingers up to scroll down. (It works in the
same way as say, your smartphone or tablet.) If you have multiple browser tabs open, you can also swipe left
and right with three fingers to quickly move between tabs.
Swipe Quickly move two fingers left or right to go backward or forward on web pages or while using apps.
Click the item you want to move with one finger. With a second finger, move the item. Release both fingers
to drop the item at its new location.
Bluetooth
This section outlines the instruction to pair a bluetooth device with your Chrome devices.
Bluetooth technology lets you connect devices wirelessly over short distances. To use the Bluetooth accessories with your Chromebook,
first check if your Chromebook supports Bluetooth. You will then need to pair it with the accessory.
To see if you can use the Bluetooth accessories with your Chromebook, click the status area in the lower right corner, where your account
picture appears. If you see the Bluetooth icon or in the menu, your Chromebook supports Bluetooth. If you do not see either
of these icons, your Chromebook does not support Bluetooth. If your Chromebook supports Bluetooth, it can connect to a wide range of
the Bluetooth accessories, including the following:
• Keyboards
• Mice
• Speakers
• Headphones
• Headsets (audio only)
To connect a Bluetooth device with your Chromebook, you need to pair them. Here is how:
1. Sign in to your Chromebook.
2. Click the status area in the lower-right corner, where your account picture appears.
3. Select your Bluetooth status in the menu that appears.
4. If Bluetooth is disconnected, click the disconnected icon. or click Enable Bluetooth in the menu. Your Chromebook will
automatically begin scanning for available Bluetooth devices.
5. Pick the device you want to add from the list of available Bluetooth devices and click Connect.
6. Follow the instructions on the screen to connect your Bluetooth device.
• If you are connecting a mouse, no PIN is normally required. If you are prompted for a PIN, enter the PIN for your mouse using your
Chrome device's keyboard.
• If you are connecting a keyboard, enter the randomly generated PIN on the keyboard you wish to pair and press Enter.
To confirm that your Bluetooth device is connected, check the Bluetooth status. You should see your device listed there.
NOTE: Just got your Chromebook or Chromebox? If you are turning on your chrome device for the first time and you
have a Bluetooth device nearby that is also turned on, your chrome device may automatically detect the device and show
you steps to pair it. You will see these instructions only if your chrome device does not already have a similar device
connected or its functionality is not built in, like a keyboard or trackpad.
Technology and components 11
Major components of your system
1. Base cover
2. System board
3
12 Major components of your system
3. Battery
4. Speaker
5. Palmrest assembly
6. Display assembly
7. Input and output board
8. World facing camera
NOTE: Dell provides a list of components and their part numbers for the original system configuration purchased. These
parts are available according to warranty coverages purchased by the customer. Contact your Dell sales representative
for purchase options.
Major components of your system 13
Removing and Installing
microSD card
Removing microSD card
Steps
1. Follow the procedure in Before working inside your computer.
2. Press in on the microSD card [1] to release it from the computer.
3. Remove the microSD card from the computer [2].
Installing microSD card
Steps
Slide the SD card into its slot until it clicks into place [1, 2].
4
14 Removing and Installing
Next steps
Follow the procedure in after working inside your computer.
Base cover
Removing the base cover
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
Steps
1. Loosen the nine captive screws that secure the base cover to the computer.
Removing and Installing 15
2. Pry the base cover from the edge using a plastic scribe [1, 2].
16 Removing and Installing
NOTE: While removing the base cover, on-site technicians must take care to remove the base cover carefully. There
are prying recess points next to the left and right hinges which ease the disassembly procedure. With the help of a
plastic scribe, pry open from the upper left side of the base cover, continue working your way around the left and
right side of the base cover, then remove the base cover from the system.
3. Lift the base cover from the computer.
Installing the base cover
Steps
1. Align the base cover on the computer and press the edges of the cover until it clicks into place.
Removing and Installing 17
2. Tighten the nine captive screws to secure the base cover to the computer.
18 Removing and Installing
Next steps
1. Install the microSD card.
2. Follow the procedure in after working inside your computer.
Battery
Lithium-ion battery precautions
CAUTION:
• Exercise caution when handling Lithium-ion batteries.
• Discharge the battery as much as possible before removing it from the system. This can be done by disconnecting
the AC adapter from the system to allow the battery to drain.
• Do not crush, drop, mutilate, or penetrate the battery with foreign objects.
• Do not expose the battery to high temperatures, or disassemble battery packs and cells.
• Do not apply pressure to the surface of the battery.
• Do not bend the battery.
• Do not use tools of any kind to pry on or against the battery.
• Ensure any screws during the servicing of this product are not lost or misplaced, to prevent accidental puncture or
damage to the battery and other system components.
• If the battery gets stuck inside your computer as a result of swelling, do not try to release it as puncturing, bending,
or crushing a lithium-ion battery can be dangerous. In such an instance, contact Dell technical support for
assistance. See www.dell.com/contactdell.
• Always purchase genuine batteries from www.dell.com or authorized Dell partners and resellers.
Removing and Installing 19
Removing the battery
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the microSD card.
3. Remove the base cover.
CAUTION:
During a service incident, it is possible that a component of the system board could become damaged if the
battery is disconnected from the system board prior to initiating the battery cut-off.
Steps
1. Connect the device to the AC adaptor and then turn it on.
2. Hold Refresh and Power button (left side of system) at the same time.
3. While holding these keys, remove the power cable from the device and then release the keys. The device should shut down and
remain off.
4. Attempt to power the unit on, by pressing the power button. If the unit does not power on, you have completed the steps and can
safely work on the Chromebook. If the unit powers on, you should repeat steps 1 to 3.
NOTE: It is now safe to unplug the battery and service the Chromebook.
5. Disconnect the battery cable from the connector in the system board [1].
6. Unroute the battery cable from the routing channel [2].
7. Remove the three (M2.0x4.0) screws that secure the battery to the palmrest [1].
8. Peel the adhesive tape that secures the battery in place [2, 3].
20 Removing and Installing
9. Pry the battery from the bottom edge [1] and remove the battery from the computer [2].
Removing and Installing 21
Installing the battery
Steps
1. Peel the protective film before installing the battery [1].
2. Align the battery into the slot on the computer and press the battery on the upper left corner to fix it to the palmrest [2].
22 Removing and Installing
3. Replace the three (M2.0x4.0) screws to secure the battery to the palmrest [1].
Removing and Installing 23
4. Affix the adhesive tape to the battery [2, 3].
5. Reroute the battery cable and connect the cable to the connector on the system board [1, 2].
24 Removing and Installing
6. Connect the AC adaptor into the device to recover the battery from cutoff mode.
Next steps
1. Install the base cover.
2. Install the microSD card.
3. Follow the procedure in after working inside your computer.
Speaker
Removing the speakers
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
Steps
1. Peel the adhesive tape that secures the speaker cable to the palmrest [1].
2. Disconnect the speaker cable from the connector on the system board [2].
3. Peel the adhesive tape that secures the speaker cable to the palmrest [3].
4. Unroute the cable from retention clips in the routing channel.
Removing and Installing 25
5. Lift the speakers away from the computer.
26 Removing and Installing
Installing the speakers
Steps
1. Place the speakers into the slots on the computer.
Removing and Installing 27
2. Reroute the speaker cable through the retention clips in the routing channel.
28 Removing and Installing
3. Connect the speaker cable to the connector on the system board [1].
4. Affix the adhesive tapes to secure the speaker cable to the computer [2, 3].
Removing and Installing 29
Next steps
1. Install the battery.
2. Install the base cover.
3. Install the microSD card.
4. Follow the procedure in after working inside your computer.
Input Output board
Removing the Input and output board
Prerequisites
NOTE: The input and output board depends on the configuration ordered. Not all system configuration come with the
input and output board.
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
Steps
1. Disconnect the Type-C power cable from the connector in the IO board [1].
2. Open the latch and disconnect the 30-pin and 40-pin IO board cable from the connectors in the IO board [2].
30 Removing and Installing
3. Remove the two (M2.0x4.0) screws that secure the IO board bracket to the IO board [1].
4. Use a plastic scribe to lift the IO board bracket away from the palmrest [2].
Removing and Installing 31
5. Remove the two (M2.0x4.0) screws that secure the IO board to the palmrest [1].
6. Lift the IO board away from the computer [2].
Installing Input output board
Steps
1. Place the IO board to its slot in the computer [1].
2. Replace the two (M2.0x4.0) screws that secure the I/O board to the palmrest [2].
32 Removing and Installing
3. Place the IO board bracket to its slot and replace the two (M2.0x4.0) screws that secure the bracket to the IO board [1, 2].
4. Connect the Type-C power cable to the connector on the IO board [1].
Removing and Installing 33
5. Connect the 30-pin and 40-pin IO board cables and close the latch to secure it to the IO board [2].
Next steps
1. Install the battery.
2. Install the base cover.
3. Install the microSD card.
4. Follow the procedure in after working inside your computer.
Keyboard lattice and Keyboard
Removing the keyboard
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
Steps
1. Disconnect the keyboard cable from the connector on the system board [1].
2. Lift the computer and open the LCD fully [2].
34 Removing and Installing
3. Use a plastic scribe to release the keyboard from the two release holes in the system [2].
NOTE: The two release holes for the keyboard are indicated by the "KB" labeling.
Removing and Installing 35
4. Turn the system over and carefully lift the keyboard and then pull the keyboard cable through the gap in the palm rest.
5. Lift and pull the keyboard out from the computer.
36 Removing and Installing
Installing the keyboard
Steps
1. Align the keyboard trim with the tabs on the system, and carefully lift the keyboard slightly and insert the keyboard cable through the
gap on the palm rest [1, 2]
2. Press the keyboard until it clicks into place and then close the LCD fully before turning the system over [1, 2]
Removing and Installing 37
3. Pull the keyboard cable from the gap in the palmrest and connect it to the connector on the system board.
38 Removing and Installing
Next steps
1. Install the battery.
2. Install the base cover.
3. Install the microSD card.
4. Follow the procedure in after working inside your computer.
System board
Removing the system board
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
Steps
1. Disconnect the input output board cables [1], touchpad cable [2] and the keyboard cable [3].
2. Disconnect the world facing camera cable [1], EMR cable [2], USB Type-C power cable [3] and the speaker cable [4] from the system
board.
Removing and Installing 39
3. Remove the single (M2x3) screw that secures the WLAN bracket to the system board [1], and lift the WLAN bracket from the system
board [2].
4. Disconnect the two wireless antennas from the connector on the system board [3].
5. Remove the single (M2x4) screw that secures the eDP bracket to the system board and remove the eDP bracket [4, 5].
6. Pull back the adhesive tape securing the display cable [6] and disconnect the display cable from the system board [7].
40 Removing and Installing
7. Lift the system board bracket away from the computer.
Removing and Installing 41
8. Remove the four (M2.0x4.0) screws that secure the system board to the palmrest [1].
9. Lift and remove the system board from the computer [2].
42 Removing and Installing
Installing system board
Steps
1. Align the screw holes on the system board with the screw holes and slide the system board on the computer [1].
2. Replace the four (M2.0x4.0) screws to secure the system board to the palmrest [2].
Removing and Installing 43
3. Place the IO board bracket in its place on the system board.
44 Removing and Installing
]
4. Reconnect the antennas to the wireless module [1], place the wireless bracket and secure it with the single (M2.0x3.0) screw [2, 3].
5. Connect the display cable to the connector on the system board and secure the adhesive tape [4, 5].
6. Place the display cable bracket and secure it with the single (M2.0x4.0) screw [6, 7].
Removing and Installing 45
7. Connect the world facing camera cable and the EMR sensor cable to the system board [1], [2].
8. Connect the Type-C power cable and the speaker cable to the connectors on the system board [3, 4].
46 Removing and Installing
9. Connect the 30-pin IO board cable, 40-pin IO board cable, and the touchpad cable to the connectors on the system board and close
the latches [1, 2].
10. Connect the keyboard cable to the connector on the system board [3].
Removing and Installing 47
Next steps
1. Install the battery.
2. Install the base cover.
3. Install the microSD card.
4. Follow the procedure in after working inside your computer.
World facing camera
Removing world facing camera
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove thesystem board
Steps
1. Remove the single (M2.5x2.5) screw that secures the world facing camera to the palmrest [1].
2. Lift the camera away from the system [2].
48 Removing and Installing
Installing world facing camera
Steps
1. Align and place the world facing camera to its slot on the palmrest.
2. Replace the single (M2.5x2.5) screw to secure the camera to the palmrest.
Removing and Installing 49
Next steps
1. Install the system board.
2. Install thebattery.
3. Install the base cover.
4. Install the microSD card.
5. Follow the procedure in after working inside your computer.
Display assembly
Removing display assembly
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
Steps
1. Disconnect the EMR sensor cable [1].
2. Remove the single (M2.0x3.0) screw that secures the wireless bracket to the system board [2].
3. Lift the wireless bracket and disconnect the wireless antennas [3, 4].
50 Removing and Installing
4. Remove the single (M2.0x4.0) screw that secures the display cable bracket to the system board [1]
5. Lift away the display bracket [2].
NOTE: The screw securing the display cable bracket also secures the left IO bracket to the system board, as a result
removal of the display cable bracket leaves the left IO bracket unsecured. Technicians should therefore, ensure that
the left IO bracket is not moved or lost during any subsequent disassembly processes.
6. Peel back the adhesive tape, open the lock and disconnect the display cable [3], [4].
Removing and Installing 51
7. Open the system to 180 degrees and place the computer on a flat surface, with the display hinges facing up.
8. Remove the six (M2.5x5.0) display hinge bracket screws that secure the display assembly to the system [1].
9. Lift the display assembly away from the system [2].
52 Removing and Installing
Installing display assembly
Steps
1. Place the chassis on a plane surface.
2. Align the display assembly with the screw holders on the system [1].
3. Replace the six (M2.5x5.0) display hinge bracket screws that secure the display assembly to the system [2].
Removing and Installing 53
4. Lift the system and close the display.
5. Connect the display cable to the connector on the system board [1].
6. Affix the adhesive tape to secure the display cable to the system [2].
7. Place the display cable bracket to secure the display cable [3].
8. Replace the single (M2.0x4.0) screw that secures the display cable bracket to the system [4].
54 Removing and Installing
9. Connect the EMR cable to the connector on the system board [1].
10. Connect the wireless antennas to the wireless module [2].
11. Place the wireless bracket to secure the wireless antennas and replace the single (M2.0x3.0) screw that secures the wireless bracket
to the system [3, 4].
Removing and Installing 55
Next steps
1. Install the battery.
2. Install the base cover.
3. Install the microSD card.
4. Follow the procedure in after working inside your computer.
Display panel-Touch
Removing display panel-Touch
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the display assembly.
Steps
1. Using a plastic scribe, carefully pry open the display panel starting from the pry points located above the left and right hinges [1].
2. Continue to work your way up through the left and right side of the panel [2].
56 Removing and Installing
3. Carefully flip the display panel over.
4. Gently peel back the adhesive tape securing the display cable on the back of the display panel [1].
5. Peel of the rubber spacer covering the display cable [2].
6. Release the lock and disconnect the display cable from the connector [3], [4].
Removing and Installing 57
Installing display panel-Touch
Steps
1. Connect the display cable to the connector on the back of the display panel and secure the lock [1], [2].
2. Place the rubber spacer on top of the display cable and place the adhesive tape back to secure the display cable [3], [4].
58 Removing and Installing
3. Carefully flip the display over on to the display panel.
4. Press along the sides of the display until it locks in place.
Removing and Installing 59
Next steps
1. Install the display assembly.
2. Install thebattery
3. Install the base cover.
4. Install the microSD card.
5. Follow the procedure in after working inside your computer.
Camera
Removing camera
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the display assembly.
6. Remove the display panel.
Steps
1. Peel the adhesive tape that covers the camera cable connector and disconnect the camera cable from the connector [1].
2. Using a plastic scribe, peel off the camera module beginning from the top left side [2].
60 Removing and Installing
Installing camera
Steps
1. Align and place the camera to its slot in the display assembly [1].
2. Connect the camera cable to the connector on the display assembly [2].
Removing and Installing 61
Next steps
1. Install the display panel.
2. Install the display assembly.
3. Install the battery.
4. Install the base cover.
5. Install the microSD card.
6. Follow the procedure in after working inside your computer.
Display cable
Removing display cable
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the display assembly.
6. Remove the display panel.
7. Remove the camera.
Steps
1. Pull out the display cable and the rubber stopper from the hinge cap [1], [2].
62 Removing and Installing
2. Disconnect the camera cable from the camera module and unroute the cable.
3. Peel the adhesive tape that secures the display cable and lift the display cable away from the display back cover and antenna
assembly.
Removing and Installing 63
Installing display cable
Steps
1. Affix the adhesive tape to secure the display cable to the display back cover.
2. Route the display cable into the hinge cap and secure the rubber stopper [1],[2].
3. Connect the camera cable connector to the camera module [2].
4. Affix the adhesive tape to secure the camera cable connector [3].
64 Removing and Installing
Removing and Installing 65
Next steps
1. Install the camera.
2. Install the display panel.
3. Install the display assembly.
4. Install the battery.
5. Install the base cover.
6. Install the microSD card.
7. Follow the procedure in after working inside your computer.
Display hinges
Removing display hinge
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the display assembly.
6. Remove the display panel.
Steps
1. Rotate the left hinge and hinge cap upwards to the display cover as shown in the image below.
NOTE: Make sure you rotate only the hinges to the unlock the position, the hinge caps will not rotate until the hinges
are in the unlock position.
2. Pull the display cable and the rubber stopper out of the left hinge.
66 Removing and Installing
3. Remove the four (M2.0x3.0) screws and six (M2.5x2.5) screws that secure the display hinge to the display assembly [1].
4. Lift the display hinge away from the display cover [2].
Removing and Installing 67
Installing display hinge
Steps
1. Place the display hinge on the display cover [1].
2. Replace the four (M2.0x3.0) and six (M2.5x2.5) screws to secure the display hinge to the display cover [2].
68 Removing and Installing
3. Reroute the display cable and the rubber stopper back into the hinge cap.
Removing and Installing 69
Next steps
1. Install the display panel.
2. Install the display assembly.
3. Install thebattery.
4. Install the base cover.
5. Install the microSD card.
6. Follow the procedure in after working inside your computer.
Palm rest
Replacing palmrest assembly
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
3. Remove the base cover.
4. Remove the battery.
5. Remove the speakers.
6. Remove the keyboard.
7. Remove the IO board.
8. Remove the display assembly.
9. Remove the system board.
70 Removing and Installing
Steps
The component you are left with is the palmrest.
NOTE: The palmrest assembly cannot be further disassembled once all of the pre-removal parts procedures are
completed. If the touchpad frame, touchpad support bracket, touchpad mylar, touchpad module, touchpad cable,
conductive tape or thermal pad are malfunctioning and need to be replaced, replace the entire palm-rest assembly.
Next steps
1. Install the system board.
2. Install the display assembly.
3. Install the IO board.
4. Install the keyboard.
5. Install the speakers.
6. Install the battery.
7. Install the base cover.
8. Install the microSD card.
9. Follow the procedure in after working inside your computer.
Removing and Installing 71
Troubleshooting
Basic troubleshooting
This page contains all the information for Dell Chromebook 3100 2-in-1 basic troubleshooting.
NOTE: Refer to Google Help Center for the online troubleshooter.
NOTE: Resetting the Chromebook, also known as Powerwash, can be attempted before Recovering the Chromebook.
Recovering the Chromebook is the last resort.
Power issues
Table 5. Power issue
Power issues
Issue Possible solutions
Chromebook would not Power On
If the Chromebook will not turn on, follow these steps:
1. Remove all external devices.
a. If the Chromebook starts, reconnect devices one at a time
while restarting the computer to figure out which device is
causing the problem. You are done.
b. If the Chromebook still does not start or exhibits the same
problem, do not reconnect anything, and continue
troubleshooting.
2. The battery life might be too low. Plug the Chromebook into
the AC adapter and let it charge for at least an hour and try
turning it on again.
NOTE: When a new Chromebook is used for the first
time, the battery is still in shipping mode. To resolve
this issue, turn off the Chromebook and plug in the
AC adapter and turn on the Chromebook again.
3. Depending on the Chromebook you have, you may see a power
indicator light close to the charging port. If you have let the
Chromebook charge and the light is not coming on, perform a
hard reset.
NOTE: You can perform a hard reset by pressing
Refresh + Power.
4. Use a different AC adapter with the same power voltage.
5. Remove the AC adapter, and turn on with the battery power
only.
Display issue
Table 6. Display issue
Display issue
Issue Possible solutions
Screen is Blank
If the Chromebook's screen is blank, try the following
troubleshooting steps to resolve the issue, checking to see if the
screen turns on after each step:
5
72 Troubleshooting
Display issue
1. Make sure that the Chromebook is on. If you are using the
battery, plug the Chromebook in and press the power button.
2. Restart the Chromebook by holding the power button down
until the device turns off, then turn it back on again.
3. Reset or Recover the Chromebook.
Audio, screen, and camera issues
Table 7. Audio, screen, and camera issues
Audio, screen, and camera issues
Issues Possible solutions
Audio issues
If you hear static, or the volume from the speakers is low when
attempting to listen to audio:
1. Make sure that the device is not muted. Try adjusting the
volume.
2. Try rebooting the Chromebook.
3. Try playing audio from various sources, including YouTube and
audio files stored locally on the Chromebook.
If the speakers are not responding when attempting to listen to
audio:
1. Unplug the device from all cables (USB, headphones, and
displays).
2. Try playing audio from various sources, including YouTube and
audio files stored locally on the Chromebook.
3. Try rebooting the Chromebook.
4. If audio still does not respond, try to Reset or Recover the
Chomebook.
Screen issues
If the screen is not operating properly (images are too dark or no
image is appearing):
1. Try adjusting the brightness with the brightness keys at the top
of the keyboard.
2. In the status area in the bottom-right of the screen, check the
display and make sure there are no issues with a mirrored or
extended display.
3. Try rebooting the Chromebook
4. If the screen issues persist, try to Reset or Recover the
Chomebook.
Camera issues
If the camera is not operating properly (blurry images or poor
performance):
1. Check that the camera is not being blocked or covered by a
privacy screen or other obstruction.
2. Try using different apps that use the camera. Try a Google+
Hangout or the onboard camera app
3. Try rebooting the Chromebook
4. If the camera issues persist, try to Reset or Recover the
Chomebook.
Troubleshooting 73
Bluetooth issue
Table 8. Bluetooth issue
Bluetooth issue
Issue Possible solutions
Bluetooth issues
If you run into issues while attempting to pair or use a Bluetooth
device with the Chromebook, try the following steps to resolve the
issue:
1. First, make sure that the Bluetooth device you are trying to pair
is supported by the Chromebook.
2. Try disabling and re-enabling Bluetooth connectivity from the
status area in the lower-right corner.
3. Try restarting the Chromebook.
4. If you are still encountering issue with bluetooth, try to Reset or
Recover the Chomebook.
Touchpad and Hotkeys issues
Table 9. Touchpad and hotkeys issues
Touchpad / Hotkeys issues
Issue Possible solutions
Touchpad not responding
If the touch pad has stopped responding, try the following steps to
resolve the issue: Try moving the cursor after each step:
1. Tap the Esc key several times.
2. Drumroll the fingers across the touch pad for a few seconds.
3. Restart the Chrome OS by holding down the power button
until the device turns off, and then turn it back on again.
4. If the cursor still does not move when using the touch pad, try
logging in from the Guest account using the tab key to
navigate.
5. If users experience touch pad issues with the account that is
not the owner (primary) account, delete the user account and
re-create it. Again, use the tab key to navigate.
6. If none of the above steps work, try to Reset or Recover the
Chomebook.
Top row of keys (Hotkeys) not responding
If a hotkey (like the volume or brightness keys) are not responding,
try the following troubleshooting steps, making sure to test the
keys after each one:
1. If the affected key is volume or brightness, check to make sure
you are not at the upper or lower limit for that setting.
2. If the backward or forward buttons do not work, check that
the same icons in a web browser are not grayed out. For
example, if the back button on a web page is grayed, this is
because the browser is not aware of a page to move backward
to.
3. Restart the Chrome OS by holding down the power button
until the device turns off, and then turn it back on again.
4. Try using the keys in the Guest account.
5. If users experience hotkey issues with the account that is not
the owner (primary) account, delete the user account and re-
create it.
6. If none of the above steps work, try to Reset or Recover the
Chomebook.
74 Troubleshooting
Chrome OS issue
Table 10. Chrome OS issue
Chrome OS issues
He’s Dead, Jim! error message
If the Chromebook becomes slow or unresponsive, and the He's
Dead, Jim! error message appears, the system could be running
low on memory.
NOTE: If you terminated the process using Google
Chrome's Task Manager, the system's task manager, or
with a command line tool, this message will appear as
well.
1. If the page was not ended intentionally, reload the page to
continue. If the message continues to appear, try closing
inactive tabs or other programs to free up more memory.
2. If issue persists, please see He's Dead, Jim! from Google
knowledge base.
Chrome OS is missing or damaged
If the Chromebook does not start and displays the message,
Chrome OS is missing or damaged. Please insert a recovery
USB stick into the USB ports on the device:
Perform a system recovery. See performing Recover Chromebook
for more information.
Chrome OS stops responding and nothing moves on the computer
display
If the Chrome OS stops responding and nothing moves on the
computer display:
1. Turn off the computer.
2. Disconnect all peripheral devices, and remove all USB devices
and media cards.
3. Disconnect the AC adapter.
4. Press and hold the power button for 10 seconds.
5. Reconnect the AC adapter, and turn on the system.
6. If issue persists, please perform a Reset or Recover the
Chromebook.
Lost / Forget Sign in password (Chrome OS)
If you lost/forget the sign-in password to the Chromebook:
1. Check if this is a managed device (Enterprise enrolled device).
a. If this is a managed device, please contact the
administrator to have them reset the password via Google
Admin Console.
b. If this is not a managed device, please proceed with the
following steps:
2. Sign in as guest or use a different PC.
3. Open an internet browser, and navigate to https://
www.google.com/accounts/recovery/
4. Select I do not know my password, and then enter the email
address that you use to sign in to Google.
5. Click Continue and follow the on-screen instructions to reset
the password.
Other Chromebook lock up or freeze symptoms that are not listed
here
If none of the above symptoms match the Chromebook’s issue,
refer to Google Help Center for the online troubleshooter and more
help.
Troubleshooting 75
CROSH
This topic covers the information that you need to know for the Chrome Shell (CROSH). CROSH and the Google Chrome URL commands
provide some troubleshooting tools, information, and advanced settings.
The Chrome OS does not support ePSA, Dell BIOS, the F12 boot menu, or DellConnect. There are no preboot diagnostics. All
troubleshootings must be done inside the OS. Chrome Shell (CROSH) and the Chrome URL commands provide some troubleshooting
tools, information, and advanced settings. CROSH is a command line interface similar to the Linux BASH or Windows command (cmd.exe)
terminals. Chrome OS is based on Linux, but CROSH does not recognize most Linux commands. The most useful commands for
troubleshooting are memory test, storage_test_1, storage_test_2, ping, and tracepath. Ping works differently than it does in Windows. By
default, it repeats until you press <Ctrl> + <C>, and it does not show any statistics. The tracepath command is similar to the Windows
traceroute command. A detailed explanation of the commands can be viewed below, by typing help, or help_advanced in CROSH.
1. Open the Chrome browser.
2. Press <Clrl> + <Alt> + <T> The interface appears as shown in the screenshot below:
3. Type in the CROSH command for diagnostics. Type 'help' for a list of available commands. Type help_advanced to display a
complete list of commands for debugging purposes
Alternately, refer to CROSH Commands for the list of the CROSH commands available for diagnostics.
CROSH commands
The table below lists the available commands in Chrome Shell (CROSH).
Table 11. Help commands
Command Purpose
exit Exits the CROSH Shell.
help Displays this help.
help_advanced Displays the help for more advanced commands, which are used
for debugging.
ping [-c count] [-i interval] [-n] [-s packetsize] [-W waittime] — Sends
ICMP ECHO_REQUEST packets to a network host. If it is "gw",
then the next hop gateway for the default route is used. It works
like the ping command on other operating systems. Press <Clrt> +
<C> to stop the ping process or halt any other command in
CROSH.
ssh [optional args...] — Starts the ssh subsystem if invoked without
any arguments. "ssh <user> <host>", "ssh <user> <host> <port>",
"ssh< user>@<host>". or "ssh <user>@<host> <port>" connect
without entering the subsystem
76 Troubleshooting
Command Purpose
ssh_forget_host Removes a host from the list of known ssh hosts. This command
displays a menu of known hosts and prompts for the host to
forget.
top Sets the chaps debug logging level. No arguments start verbose
logging
Table 12. Advanced help command
Command Purpose
battery_test[<test length>] Tests the battery discharge rate for a given number of seconds. No
argument defaults to a 300 s test.
bt_console [<agent capability>] Enters a Bluetooth debugging console. The Optional argument
specifies the capability of a pairing agent the console provides; see
the Bluetooth Core specification for valid options.
chaps_debug [start|stop|<log_level>] Sets the chaps debug logging level. No arguments will start
verbose logging.
connectivity Shows connectivity status.
experimental_storage<status|enable|disable> Enables or disables experimental storage features.
ff_debug [<tag_expr>] [--help] [--list_valid_tags] [--reset] Adds and removes flimflam debugging tags.
memory_test Performs extensive memory testing on the available free memory.
modem <command> [args...] Interacts with the 3G modem. Run modem help for detailed help.
modem_set_carrier carrier-name Configures the modem for the specified carrier.
network_diag[--date] [--link] [--show-macs] [--wifi] [--help] [--
wifi-mon] <host>
Performs a suite of network diagnostics and saves a copy of the
output to your download directory
network_logging <wifi|cellular|ethernet> Enables a predefined set of tags useful for debugging the specified
device.
p2p_update [enable | disable] Enables or disables the peer-to-peer (P2P) sharing of updates over
the local network. This will both attempt to get updates from other
peers in the network and shares the downloaded updates with
them. Run this command without arguments to see the current
state.
rlz < status | enable | disable> Enables or disables RLZ.
rollback Attempts to roll back to the previous update cached on your
system. Only available on non-stable channels and non-enterprise
enrolled devices. Please note that this will power wash your device.
route [-n] [-6] Displays the routing tables.
set_apn [-n <network-id>] [-u <username>] [-p <password>]
<apn>
Sets the APN to use when connecting to the network specified by
<network-id>. If <network-id> is not specified, use the network-id
of the currently registered network.
set_apn - c Clears the APN to be used, so that the default APN is used instead.
set_arpgw <true | false> Turns on the extra network state checking to make sure the
default gateway is reachable.
set_cellular_ppp [-u <username>] [-p <password>] Sets the PPP username and/or password for an existing cellular
connection. If neither -u nor -p is provided, this shows the existing
PPP username for the cellular connection.
set_cellular_ppp -c Clears any existing PPP username and PPP password for an
existing cellular connection.
sound <command> <argument> Low level sound configuration. Can be used to play/record audio
samples and enable beam forming on Pixel. sound beamforming
<on|off > will enable/disable the feature. sound record
Troubleshooting 77
Command Purpose
[duration] will start recording. sound play <filename> plays the
recorded audio samples
storage_status Reads storage device SMART health status, vendor attributes, and
error logs.
storage_test_1 Performs a short offline SMART test.
storage_test_2 Performs an extensive readability test.
syslog <message> Logs a message to system log.
tpcontrol{status | taptoclick [on|off] sensitivity [1-5] | set
<property>< value>} tpcontrol {syntp [on|off]}
Allows the user to manually adjust advanced touchpad settings.
tracepath [-n] <destination>[/port] Traces the path/route to a network host.
update_over_cellular [enable|disable] Enables or disables the auto updates over cellular networks. Run
without arguments to see the current state.
upload crashes Uploads available crash reports to the crash server.
wpa_debug [<debug_level>] [--help] [--list_valid_level] [--reset] Sets the wpa_supplicant debugging level.
xset m [acc_mult[/acc_div] [thr]] xset m default Tweaks the mouse acceleration rate.
xset r rate [delay [rate]] Tweaks the autorepeat rates. The delay is the number of
milliseconds before autorepeat starts. The rate is the number of
repeats per second.
xset r [keycode] < on|off > Turns autorepeat on/off. If a keycode is specified, it affects only
that key. If not specified, it affects global behavior.
Chrome commands
Chrome:// pages contain experimental features, diagnostic tools, and detailed statistics. They are hidden in Chrome's user interface.
Chrome://about page lists all Chrome's internal pages. To view all the commands, type chrome://about in the Chrome browser URL
as shown below:
Table 13. Chrome browser shortcuts
Purpose Browser Shortcut Explanation
System Information chrome://system/ "Who am I".. BIOS version, and so on
Basic Connectivity Diags chrome://diagnostics/ Test for NIC and Internet connection
Chrome Information chrome://version More "Who am I" type of stuff
78 Troubleshooting
Purpose Browser Shortcut Explanation
Create Recovery USB Stick chrome://imageburner/ Google's version of DBAR/DBRM
Chrome Flags chrome://flags Experimental features beyond the scope of
what Dell supports
Memory Troubleshooting chrome://memory View running processes and memory
utilization
Module Load chrome://conflicts Shows conflicts of all modules loaded by
Chrome
Chrome Sync Status chrome://syncchrome://sync-
internals
Allows troubleshooting of connected
accounts
Connectivity Troubleshooting chrome://net-internals Comprehensive network/connectivity
diagnostics, including DNS analysis,
Waterfall and Bandwidth diagnostics, and so
on
Histogram chrome://histograms Actual work and I/O audit
Credits chrome://credits References to all module/libs contributions
and their respective wiki/license URLs
Crash Reporting chrome://crashes Shows detailed crash report, if the feature
was enabled
Apps RAM Utilization chrome://appcache-internals Detailed memory usage for apps/
extensions, especially handy for 2 GB
Chromebooks
Following are the 12 most helpful chrome:// commands that you should know:
1. chrome://flags : From here you can enable some of the experimental features that are hidden in the Google Chrome browser. Please
note that as mentioned on this page, since these are experimental, these might not work as expected and might cause issues. Enable
these features, and use it at your own risk.
2. chrome://dns: This displays the list of host names for which the browser will pre-fetch the DNS records.
Troubleshooting 79
3. chrome://downloads: This is also available from the Menu > Downloads. Shortcut key is Ctrl+J.
4. chrome://extensions: This is also available from the Menu > Tools > Extensions.
5. chrome://bookmarks: This is also available from the Menu > Bookmarks > Bookmark Manager. Short cut key is Ctrl+Shift+O.
80 Troubleshooting
6. chrome://history: This is also available from the Menu > History. Short cut key is Ctrl+H.
7. chrome://memory: This will redirect to “chrome://memory-redirect/”. This will display the memory used by the Google Chrome
browser. This also displays all the process related to browser with their PID, process name, and the memory it takes.
Troubleshooting 81
8. NOTE: Net-internals events viewer and related functionality has been removed. Please use Chrome://net-export to
save netlogs and the external Catapult netlog_viewer to view them.
chrome://net-internals: This displays all networking related information. Use this to capture network events generated by the
browser. You can also export this data. You can view DNS host resolver cache. One of the important features in this feature is “Test”.
If a URL failed to load, you can go to “chrome://net-internals” > click on “Tests” tab > type that URL which failed, and click on “Start
Test”, which does some test and report you why that URL failed. chrome://plugins/.
9. chrome://quota-internals: This gives information about the disk space quote used by the browser, including the breakdown of how
much space the individual websites took under temporary files.
10. chrome://sessions: This displays the number of sessions and magic list that are currently running.
82 Troubleshooting
11. chrome://settings: This is also available from the Menu > Options (on Windows), and Menu > Preferences (on Linux). From here
you can control various browser related settings.
12. chrome://sync-internals: This gives information about the Chrome sync feature, including the Sync URL used by Google, and sync
statistics.
Troubleshooting 83
Commonly used CROSH command
This page contains information about the most commonly used CROSH commands to diagnose the Dell Chromebook 3100 2-in-1.
Below are some of the most commonly used CROSH commands to troubleshoot a hardware issue.
NOTE: CROSH storage_test_1 and storage_test_2 are not supported on the eMMC storage device.
Check battery charging status
The Chrome Shell (CROSH) includes a simple battery health diagnostic test. This is to confirm that the battery is charging and to check
on the battery health and discharge rate. Follow the instruction provided to check on the battery charging status:
1. Connect the AC adapter to the Chromebook and a power outlet.
2. Turn on, and sign in to the Chromebook.
3. Open the Chrome browser.
4. Press CTRL + ALT + T to open CROSH.
5. Type battery_test 1 into CROSH, and then press Enter.
84 Troubleshooting
6. Check the result to confirm that the battery is charging.
Check battery health
Follow the steps to evaluate the health of the Chromebook battery, and check the discharge rate:
1. Disconnect the AC adapter from the Chromebook.
2. Turn on and sign in to Chromebook.
3. Open the Chrome browser.
4. Press CTRL + ALT + T to open CROSH.
Troubleshooting 85
5. Type battery_test 1 into CROSH, and then press Enter.
6. A screen displays the current battery health and discharge rate.
• If the Battery health percentage is greater than 50%, the battery is within the expected wear limits.
• If the Battery health percentage is equal to or less than 50% and the battery is less than a year old, the battery is outside expected
wear limits and might need to be replaced.
• If the test results show that Battery is Unknown, the battery might need to be replaced.
Checking memory
Follow the steps below to perform a memory check for Chromebook:
NOTE: This will approximately take 20 minutes to complete the test, and it also depends on the capacity of the memory.
1. Turn on and sign in to Chromebook.
2. Open the Chrome browser.
86 Troubleshooting
3. Press CTRL + ALT + T to open CROSH.
4. Type memory_test into CROSH, and then press Enter.
Troubleshooting 87
5. A diagnostic screen displays the result of the memory test passed without any errors.
Example of a memory test failure.
Checking network status
If you are having trouble connecting to the Internet, use the steps in one or more of the following sections to test the network adapter:
Follow the instruction to gather the information about the network and diagnose the network errors.
88 Troubleshooting
1. Turn on and sign in to Chromebook.
2. Open the Chrome browser.
3. Press CTRL + ALT + T to open CROSH.
4. Type network_diag into CROSH, and then press Enter.
Troubleshooting 89
5. Wait while CROSH performs a set of network diagnostic tests. A diagnostic screen displays the results of the network adapter health
test.
6. The diagnostic test log is saved as a.txt (plain text) file in the Files app.
90 Troubleshooting
7. If the diagnostic test returns a failure message, make sure the Wi-Fi adapter is enabled and connect to a network.
Reset Chromebook
This page contains all information about resetting Dell Chromebook 3100 2-in-1.
All local user data stored on the Chromebook can be cleared by resetting it to its original factory state (also known as Powerwash).
This step might be helpful if you want to reset owner permissions or if you are experiencing issues with your user profile.
NOTE: All data stored on your Chromebook such as downloaded files, photos, owner permissions, and saved networks,
will be deleted for all accounts when performing a factory reset. After clearing this data, you will be guided through the
initial setup again. Resetting your device will not affect your accounts themselves, or any data synced to these
accounts.
NOTE: Do not follow the instructions below if you're using a managed Chrome device, as you will not be able to re-enroll
your device after powerwashing it.
Follow these steps to reset your Chromebook to its original factory state:
1. Click the status area in the lower-right corner, where your account picture appears.
Troubleshooting 91
2. Click Settings as highlighted from the screenshot below.
3. Click Show advanced settings to expand the menu.
92 Troubleshooting
4. Click the Powerwash button.
5. Click Restart when prompted.
You can also reset your Chromebook from the sign-in screen by holding down the keys Ctrl+Alt+Shift+R and clicking Restart. (If
you are signed in to your Chromebook, sign out first before you press on Ctrl+Alt+Shift+R, then click Restart. Once the
Chromebook is restarted, click Reset.)
After you restart the Chromebook, you should now see the setup screen. Follow the instructions on the screen to set up your
Chromebook again. Make sure you sign in with your primary Google Account, because this account is set as the owner account.
Troubleshooting 93
Recovery Chromebook
This page contains information about recovering Dell Chromebook 3100 2-in-1.
Recovering the Chromebook
Install a new version of the Chrome operating system on your Chromebook by going through the recovery process. You may want to go
through this process if you are having problems updating your Chromebook or if it stops working.
NOTE: All account information and data stored on your Chromebook, such as photos, downloaded files, and saved
networks, will be deleted. Owner privileges for your primary account will also be reset. However, the actual Google
Accounts and any data synced to these accounts are not affected by the recovery process. After the recovery process is
complete, you will be guided through the initial setup again.
Prerequisites:
Before starting this process, you need the following:
• A Chrome device, Windows, Mac, or the Linux computer with administrative rights.
• A 4 GB or larger USB flash drive or SD card that you do not mind clearing.
Step 1- Check for the Chrome OS is missing or damaged message
If you see this message, you can first try to perform a hard reset on your Chromebook by pressing Refresh + Power. If you still see this
message after performing a hard reset, please proceed to Step 2.
If you see the Chrome OS verification is turned off message, refer to Chrome OS verification is turned off section below.
Step 2- Create the recovery USB flash drive or SD card
Insert a USB flash drive or SD card into your computer and follow the instructions below
Table 14. USB flash drive or SD card
Operating System Instructions
Chrome Device Instructions
Create a recovery flash drive by using the Image Burner. The tool
may not be available in all languages.
1. Type chrome://imageburner into the omnibox (browser's
address bar) .
2. Run the tool and follow the instructions that appear on your
screen.
NOTE: When recovering your Chromebook, make sure to
create the recovery flash drive on the same model.
Windows Instructions
1. Click this link to download the Recovery Tool. If you are a
network administrator for your school, business, or
organization, click this link to download the Recovery Tool: 2. 3.
2. Run the tool and follow the instructions that appear on your
screen.
3. After you recover your Chromebook, you must format your
USB flash drive or SD card using the Recovery Tool. If you do
not format your USB flash drive or SD card, you will not be able
to use all the storage space on your external device.
Additionally, your USB flash drive or SD card may not be
recognizable by Windows.
Mac Instructions
Create a recovery flash drive by using the Recovery Tool. The tool
may not be available in all languages.
1. Click this link to download the Recovery Tool.
2. Run the tool and follow the instructions that appear on your
screen.
94 Troubleshooting
Operating System Instructions
After the process is complete, you might see an alert saying your
USB drive or SD card is unreadable. If this fails, try removing and
reinserting your USB drive or SD card. Your USB drive or SD card
should now be ready to use for recovery.
Linux Instructions
Create a recovery flash drive by using the Recovery Tool. The tool
may not be available in all languages.
1. 1.Click this link to download the Recovery Tool.
2. Modify the script permissions to allow execution with the
following command: $ & sudo chmod 755
linux_recovery.sh
3. Run the script with root privileges with the following
command:$ sudo bash linux_recovery.sh
4. Follow the prompts from the tool to complete building the
operating system image.
Reinstall the Chrome Operating System
1. Start your Chromebook.
2. When the Chrome OS is missing or damaged screen appears, insert the USB flash drive or SD card you created into the USB port
or SD card slot on your Chrome device
3. Wait for the Chromebook to boot up from the flash drive
4. Follow the instructions that appear on the screen.
5. On successful installation of the Chrome operating system, you will be prompted to remove the USB flash drive or SD card.
6. Remove the USB flash drive or SD card when prompted, and your Chromebook will automatically restart.
You should now be able to start your Chromebook as normal. Because the data stored on your Chromebook has been cleared, you will
need to go through the initial setup again. Make sure you sign in with your primary Google Account, because this account will be set as the
owner account.
Chrome OS verification is turned off Message
By default, Chromebooks are set to the normal user mode. If you've set the user mode to developer mode instead, you'll see a screen with
the message "Chrome OS verification is turned off" when you start up. Use the developer mode if you want to test your own version of
the Chrome operating system.
Press Ctrl+D to enter developer mode. If you press the space bar instead, you'll see a screen asking to recover your device.
Troubleshooting Tips
Table 15. Troubleshooting tips
Question Solution
I am unable to recover my Chromebook To help ensure that you are running the latest version of Chrome
OS once you recover your Chromebook, we recommend creating
the recovery media with the latest version of Chrome OS and avoid
using recovery media that may contain an older version of the
operating system.
An error message An unexpected error has occurred. Try the following steps:
1. Confirm that you successfully completed all instructions exactly
as specified in Step 2: Create the recovery USB flash drive or
SD card above.
2. Try using a different USB stick or SD card.
3. If the problem persists, contact Google Chrome support team.
An error message You are using an out-of-date Chrome OS
recovery image.
You should download an up-to date recovery image. Simply follow
all the instructions exactly as specified in Step 2 above.
Troubleshooting 95
Question Solution
You successfully recovered your Chromebook but now you can not
use your USB or SD card with Windows
After you have completed recovery, you need to format your USB
or SD card using the recovery tool.
You successfully recovered your Chromebook but now Windows
does not recognize the whole size of the USB or SD card used for
recover.
After you have completed recovery, you need to format your USB
or SD card using the recovery tool.
96 Troubleshooting
Getting help
Topics:
•Contacting Dell
Contacting Dell
Prerequisites
NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice,
packing slip, bill, or Dell product catalog.
About this task
Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services
may not be available in your area. To contact Dell for sales, technical support, or customer service issues:
Steps
1. Go to Dell.com/support.
2. Select your support category.
3. Verify your country or region in the Choose a Country/Region drop-down list at the bottom of the page.
4. Select the appropriate service or support link based on your need.
6
Getting help 97