DELL 5400 User Manual

Displayed below is the user manual for 5400 by DELL which is a product in the Notebooks category. This manual has pages.

Related Manuals

DELL 5400 Manual

Dell Latitude 5400

Service Manual

Regulatory Model: P98G

Regulatory Type: P98G001

Identifier GUID-5B8DE7B7-879F-45A4-88E0-732155904029

Version 13

Status Released

Notes, cautions, and warnings

NOTE: A NOTE indicates important information that helps you make better use of your product.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the

problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Other trademarks may be trademarks of their respective owners.

2019 - 09

Rev. A02

1 Working on your computer............................................................................................................ 6

Safety instructions.................................................................................................................................................................6

Before working inside your computer........................................................................................................................... 6

Safety precautions...........................................................................................................................................................7

Electrostatic discharge—ESD protection.................................................................................................................... 7

ESD field service kit ........................................................................................................................................................8

Transporting sensitive components.............................................................................................................................. 9

After working inside your computer.............................................................................................................................. 9

2 Technology and components........................................................................................................10

USB features........................................................................................................................................................................ 10

USB Type-C..........................................................................................................................................................................12

HDMI 1.4a.............................................................................................................................................................................. 13

Power button LED behavior............................................................................................................................................... 14

3 Major components of your system................................................................................................16

4 Disassembly and reassembly........................................................................................................ 19

MicroSD card........................................................................................................................................................................19

Removing the microSD card.........................................................................................................................................19

Installing the microSD card...........................................................................................................................................20

Base cover............................................................................................................................................................................20

Removing the base cover.............................................................................................................................................20

Installing the base cover............................................................................................................................................... 22

Battery.................................................................................................................................................................................. 25

Lithium-ion battery precautions...................................................................................................................................25

Removing the battery................................................................................................................................................... 25

Installing the battery......................................................................................................................................................27

WWAN card......................................................................................................................................................................... 29

Removing the WWAN card.......................................................................................................................................... 29

Installing the WWAN card............................................................................................................................................ 30

WLAN card...........................................................................................................................................................................30

Removing the WLAN card............................................................................................................................................30

Installing the WLAN card...............................................................................................................................................31

Coin-cell battery.................................................................................................................................................................. 32

Removing the coin-cell battery....................................................................................................................................32

Installing the coin-cell battery...................................................................................................................................... 33

Memory modules................................................................................................................................................................. 34

Removing the memory module.................................................................................................................................... 34

Installing the memory module...................................................................................................................................... 35

DC-in port.............................................................................................................................................................................36

Removing the DC-in port............................................................................................................................................. 36

Installing the DC-in port................................................................................................................................................38

Solid state drive................................................................................................................................................................... 40

Contents

Contents 3

Removing the M.2 SSD................................................................................................................................................ 40

Installing the M.2 SSD...................................................................................................................................................42

Solid state drive bracket.....................................................................................................................................................43

Removing the solid state drive bracket...................................................................................................................... 43

Installing the solid state drive bracket.........................................................................................................................44

Inner frame........................................................................................................................................................................... 45

Removing the inner frame............................................................................................................................................45

Installing the inner frame.............................................................................................................................................. 46

SmartCard reader................................................................................................................................................................48

Removing the SmartCard reader.................................................................................................................................48

Installing the SmartCard reader...................................................................................................................................50

Touchpad buttons............................................................................................................................................................... 52

Removing the touchpad button board........................................................................................................................52

Installing the touchpad button board..........................................................................................................................55

LED board.............................................................................................................................................................................57

Removing the LED board..............................................................................................................................................57

Installing the LED board................................................................................................................................................59

Speakers................................................................................................................................................................................61

Removing the speakers................................................................................................................................................. 61

Installing the speakers...................................................................................................................................................62

Heatsink assembly...............................................................................................................................................................64

Removing the heatsink assembly................................................................................................................................ 64

Installing the heatsink assembly...................................................................................................................................66

System board.......................................................................................................................................................................68

Removing the system board........................................................................................................................................ 68

Installing the system board...........................................................................................................................................72

Keyboard...............................................................................................................................................................................77

Removing the keyboard................................................................................................................................................ 77

Installing the keyboard...................................................................................................................................................78

Keyboard bracket................................................................................................................................................................ 80

Removing the keyboard bracket................................................................................................................................. 80

Installing the keyboard bracket.....................................................................................................................................81

Power button....................................................................................................................................................................... 83

Removing the power button with fingerprint reader................................................................................................ 83

Installing the power button with fingerprint reader.................................................................................................. 84

Display assembly..................................................................................................................................................................86

Removing the display assembly................................................................................................................................... 86

Installing the display assembly......................................................................................................................................89

Display bezel.........................................................................................................................................................................92

Removing display bezel.................................................................................................................................................92

Installing the display bezel ........................................................................................................................................... 94

Display panel.........................................................................................................................................................................96

Removing display panel.................................................................................................................................................96

Installing display panel .................................................................................................................................................. 99

Camera................................................................................................................................................................................100

Removing camera........................................................................................................................................................ 100

Installing camera............................................................................................................................................................101

Hinge caps.......................................................................................................................................................................... 103

Removing hinge caps...................................................................................................................................................103

Installing hinge caps..................................................................................................................................................... 104

4Contents

Display hinges.....................................................................................................................................................................105

Removing display hinge...............................................................................................................................................105

Installing display hinge ................................................................................................................................................ 106

Display (eDP) cable............................................................................................................................................................107

Removing display cable................................................................................................................................................107

Installing display cable..................................................................................................................................................108

Display back cover assembly............................................................................................................................................ 109

Replacing the display back cover...............................................................................................................................109

Palmrest assembly..............................................................................................................................................................110

Replacing the palmrest and keyboard assembly....................................................................................................... 110

5 Troubleshooting........................................................................................................................ 112

Enhanced Pre-Boot System Assessment (ePSA) diagnostics..................................................................................... 112

Running the ePSA diagnostics.................................................................................................................................... 112

System diagnostic lights.................................................................................................................................................... 113

WiFi power cycle.................................................................................................................................................................114

6 Getting help..............................................................................................................................115

Contacting Dell....................................................................................................................................................................115

Contents 5

Identifier GUID-9CCD6D90-C1D1-427F-9E77-D4F83F3AD2B6

Version 3

Status Released

Working on your computer

Identifier GUID-9821EDD0-9810-4752-8B3C-AF89B67C2DB0

Version 12

Status Released

Safety instructions

Prerequisites

Use the following safety guidelines to protect your computer from potential damage and to ensure your personal safety. Unless otherwise

noted, each procedure included in this document assumes that the following conditions exist:

• You have read the safety information that shipped with your computer.

• A component can be replaced or, if purchased separately, installed by performing the removal procedure in reverse order.

About this task

NOTE: Disconnect all power sources before opening the computer cover or panels. After you finish working inside the

computer, replace all covers, panels, and screws before connecting to the power source.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For

additional safety best practices information, see the Regulatory Compliance Homepage

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and

simple repairs as authorized in your product documentation, or as directed by the online or telephone service and

support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow

the safety instructions that came with the product.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching

an unpainted metal surface at the same time as touching a connector on the back of the computer.

CAUTION: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a card by

its edges or by its metal mounting bracket. Hold a component such as a processor by its edges, not by its pins.

CAUTION: When you disconnect a cable, pull on its connector or on its pull-tab, not on the cable itself. Some cables

have connectors with locking tabs; if you are disconnecting this type of cable, press in on the locking tabs before you

disconnect the cable. As you pull connectors apart, keep them evenly aligned to avoid bending any connector pins. Also,

before you connect a cable, ensure that both connectors are correctly oriented and aligned.

NOTE: The color of your computer and certain components may appear differently than shown in this document.

Identifier GUID-CEF5001C-74CA-41CA-8C75-25E2A80E8909

Version 31

Status Released

Before working inside your computer

About this task

To avoid damaging your computer, perform the following steps before you begin working inside the computer.

6 Working on your computer

Steps

1. Ensure that you follow the Safety Instruction.

2. Ensure that your work surface is flat and clean to prevent the computer cover from being scratched.

3. Turn off your computer.

4. Disconnect all network cables from the computer.

CAUTION: To disconnect a network cable, first unplug the cable from your computer and then unplug the cable from

the network device.

5. Disconnect your computer and all attached devices from their electrical outlets.

6. Press and hold the power button while the computer is unplugged to ground the system board.

NOTE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching

an unpainted metal surface at the same time as touching a connector on the back of the computer.

Identifier GUID-30EEEBF7-B61E-422E-BF3E-75335EC500E3

Version 13

Status Released

Safety precautions

The safety precautions chapter details the primary steps to be taken before performing any disassembly instructions.

Observe the following safety precautions before you perform any installation or break/fix procedures involving disassembly or reassembly:

• Turn off the system and all attached peripherals.

• Disconnect the system and all attached peripherals from AC power.

• Disconnect all network cables, telephone, and telecommunications lines from the system.

• Use an ESD field service kit when working inside any notebook to avoid electrostatic discharge (ESD) damage.

• After removing any system component, carefully place the removed component on an anti-static mat.

• Wear shoes with non-conductive rubber soles to reduce the chance of getting electrocuted.

Standby power

Dell products with standby power must be unplugged before you open the case. Systems that incorporate standby power are essentially

powered while turned off. The internal power enables the system to be remotely turned on (wake on LAN) and suspended into a sleep

mode and has other advanced power management features.

Unplugging, pressing and holding the power button for 15 seconds should discharge residual power in the system board. Remove the

battery from notebooks.

Bonding

Bonding is a method for connecting two or more grounding conductors to the same electrical potential. This is done through the use of a

field service electrostatic discharge (ESD) kit. When connecting a bonding wire, ensure that it is connected to bare metal and never to a

painted or non-metal surface. The wrist strap should be secure and in full contact with your skin, and ensure that you remove all jewelry

such as watches, bracelets, or rings prior to bonding yourself and the equipment.

Identifier GUID-E1EAA29F-F785-45A4-A7F8-3E717B40D541

Version 8

Status Released

Electrostatic discharge—ESD protection

ESD is a major concern when you handle electronic components, especially sensitive components such as expansion cards, processors,

memory DIMMs, and system boards. Very slight charges can damage circuits in ways that may not be obvious, such as intermittent

problems or a shortened product life span. As the industry pushes for lower power requirements and increased density, ESD protection is

an increasing concern.

Due to the increased density of semiconductors used in recent Dell products, the sensitivity to static damage is now higher than in

previous Dell products. For this reason, some previously approved methods of handling parts are no longer applicable.

Two recognized types of ESD damage are catastrophic and intermittent failures.

Working on your computer 7

•Catastrophic – Catastrophic failures represent approximately 20 percent of ESD-related failures. The damage causes an immediate

and complete loss of device functionality. An example of catastrophic failure is a memory DIMM that has received a static shock and

immediately generates a "No POST/No Video" symptom with a beep code emitted for missing or nonfunctional memory.

•Intermittent – Intermittent failures represent approximately 80 percent of ESD-related failures. The high rate of intermittent failures

means that most of the time when damage occurs, it is not immediately recognizable. The DIMM receives a static shock, but the

tracing is merely weakened and does not immediately produce outward symptoms related to the damage. The weakened trace may

take weeks or months to melt, and in the meantime may cause degradation of memory integrity, intermittent memory errors, etc.

The more difficult type of damage to recognize and troubleshoot is the intermittent (also called latent or "walking wounded") failure.

Perform the following steps to prevent ESD damage:

• Use a wired ESD wrist strap that is properly grounded. The use of wireless anti-static straps is no longer allowed; they do not provide

adequate protection. Touching the chassis before handling parts does not ensure adequate ESD protection on parts with increased

sensitivity to ESD damage.

• Handle all static-sensitive components in a static-safe area. If possible, use anti-static floor pads and workbench pads.

• When unpacking a static-sensitive component from its shipping carton, do not remove the component from the anti-static packing

material until you are ready to install the component. Before unwrapping the anti-static packaging, ensure that you discharge static

electricity from your body.

• Before transporting a static-sensitive component, place it in an anti-static container or packaging.

Identifier GUID-4AA1893E-5817-437E-8D54-6A96821FC6E6

Version 4

Status Released

ESD field service kit

The unmonitored Field Service kit is the most commonly used service kit. Each Field Service kit includes three main components: anti-

static mat, wrist strap, and bonding wire.

Components of an ESD field service kit

The components of an ESD field service kit are:

•Anti-Static Mat – The anti-static mat is dissipative and parts can be placed on it during service procedures. When using an anti-

static mat, your wrist strap should be snug and the bonding wire should be connected to the mat and to any bare metal on the system

being worked on. Once deployed properly, service parts can be removed from the ESD bag and placed directly on the mat. ESD-

sensitive items are safe in your hand, on the ESD mat, in the system, or inside a bag.

•Wrist Strap and Bonding Wire – The wrist strap and bonding wire can be either directly connected between your wrist and bare

metal on the hardware if the ESD mat is not required, or connected to the anti-static mat to protect hardware that is temporarily

placed on the mat. The physical connection of the wrist strap and bonding wire between your skin, the ESD mat, and the hardware is

known as bonding. Use only Field Service kits with a wrist strap, mat, and bonding wire. Never use wireless wrist straps. Always be

aware that the internal wires of a wrist strap are prone to damage from normal wear and tear, and must be checked regularly with a

wrist strap tester in order to avoid accidental ESD hardware damage. It is recommended to test the wrist strap and bonding wire at

least once per week.

•ESD Wrist Strap Tester – The wires inside of an ESD strap are prone to damage over time. When using an unmonitored kit, it is a

best practice to regularly test the strap prior to each service call, and at a minimum, test once per week. A wrist strap tester is the

best method for doing this test. If you do not have your own wrist strap tester, check with your regional office to find out if they have

one. To perform the test, plug the wrist-strap's bonding-wire into the tester while it is strapped to your wrist and push the button to

test. A green LED is lit if the test is successful; a red LED is lit and an alarm sounds if the test fails.

•Insulator Elements – It is critical to keep ESD sensitive devices, such as plastic heat sink casings, away from internal parts that are

insulators and often highly charged.

•Working Environment – Before deploying the ESD Field Service kit, assess the situation at the customer location. For example,

deploying the kit for a server environment is different than for a desktop or portable environment. Servers are typically installed in a

rack within a data center; desktops or portables are typically placed on office desks or cubicles. Always look for a large open flat work

area that is free of clutter and large enough to deploy the ESD kit with additional space to accommodate the type of system that is

being repaired. The workspace should also be free of insulators that can cause an ESD event. On the work area, insulators such as

Styrofoam and other plastics should always be moved at least 12 inches or 30 centimeters away from sensitive parts before physically

handling any hardware components

•ESD Packaging – All ESD-sensitive devices must be shipped and received in static-safe packaging. Metal, static-shielded bags are

preferred. However, you should always return the damaged part using the same ESD bag and packaging that the new part arrived in.

The ESD bag should be folded over and taped shut and all the same foam packing material should be used in the original box that the

new part arrived in. ESD-sensitive devices should be removed from packaging only at an ESD-protected work surface, and parts

should never be placed on top of the ESD bag because only the inside of the bag is shielded. Always place parts in your hand, on the

ESD mat, in the system, or inside an anti-static bag.

8Working on your computer

•Transporting Sensitive Components – When transporting ESD sensitive components such as replacement parts or parts to be

returned to Dell, it is critical to place these parts in anti-static bags for safe transport.

ESD protection summary

It is recommended that all field service technicians use the traditional wired ESD grounding wrist strap and protective anti-static mat at all

times when servicing Dell products. In addition, it is critical that technicians keep sensitive parts separate from all insulator parts while

performing service and that they use anti-static bags for transporting sensitive components.

Identifier GUID-0332D293-B3CC-4042-8A0D-795B07BE277E

Version 3

Status Released

Transporting sensitive components

When transporting ESD sensitive components such as replacement parts or parts to be returned to Dell, it is critical to place these parts in

anti-static bags for safe transport.

Lifting equipment

Adhere to the following guidelines when lifting heavy weight equipment:

CAUTION: Do not lift greater than 50 pounds. Always obtain additional resources or use a mechanical lifting device.

1. Get a firm balanced footing. Keep your feet apart for a stable base, and point your toes out.

2. Tighten stomach muscles. Abdominal muscles support your spine when you lift, offsetting the force of the load.

3. Lift with your legs, not your back.

4. Keep the load close. The closer it is to your spine, the less force it exerts on your back.

5. Keep your back upright, whether lifting or setting down the load. Do not add the weight of your body to the load. Avoid twisting your

body and back.

6. Follow the same techniques in reverse to set the load down.

Identifier GUID-F99E5E0D-8C96-4B55-A6C9-5722A035E20C

Version 9

Status Released

After working inside your computer

About this task

After you complete any replacement procedure, ensure that you connect any external devices, cards, and cables before turning on your

computer.

Steps

1. Connect any telephone or network cables to your computer.

CAUTION: To connect a network cable, first plug the cable into the network device and then plug it into the

computer.

2. Connect your computer and all attached devices to their electrical outlets.

3. Turn on your computer.

4. If required, verify that the computer works correctly by running ePSA diagnostics.

Working on your computer 9

Identifier GUID-ED20F234-C5C4-4103-926C-774E57821BF4

Version 7

Status Released

Technology and components

This chapter details the technology and components available in the system.

Topics:

•USB features

•USB Type-C

•HDMI 1.4a

•Power button LED behavior

Identifier GUID-2FE1F42C-4FCF-4580-9C68-D258E212454D

Version 15

Status Released

USB features

Universal Serial Bus, or USB, was introduced in 1996. It dramatically simplified the connection between host computers and peripheral

devices like mice, keyboards, external drivers, and printers.

Let's take a quick look on the USB evolution referencing to the table below.

Table 1. USB evolution

Type Data Transfer Rate Category Introduction Year

USB 2.0 480 Mbps High Speed 2000

USB 3.0/USB 3.1 Gen 1 5 Gbps Super Speed 2010

USB 3.1 Gen 2 10 Gbps Super Speed 2013

USB 3.0/USB 3.1 Gen 1 (SuperSpeed USB)

For years, the USB 2.0 has been firmly entrenched as the de facto interface standard in the PC world with about 6 billion devices sold, and

yet the need for more speed grows by ever faster computing hardware and ever greater bandwidth demands. The USB 3.0/USB 3.1 Gen 1

finally has the answer to the consumers' demands with a theoretically 10 times faster than its predecessor. In a nutshell, USB 3.1 Gen 1

features are as follows:

• Higher transfer rates (up to 5 Gbps)

• Increased maximum bus power and increased device current draw to better accommodate power-hungry devices

• New power management features

• Full-duplex data transfers and support for new transfer types

• Backward USB 2.0 compatibility

• New connectors and cable

The topics below cover some of the most commonly asked questions regarding USB 3.0/USB 3.1 Gen 1.

10 Technology and components

Speed

Currently, there are 3 speed modes defined by the latest USB 3.0/USB 3.1 Gen 1 specification. They are Super-Speed, Hi-Speed and Full-

Speed. The new SuperSpeed mode has a transfer rate of 4.8Gbps. While the specification retains Hi-Speed, and Full-Speed USB mode,

commonly known as USB 2.0 and 1.1 respectively, the slower modes still operate at 480Mbps and 12Mbps respectively and are kept to

maintain backward compatibility.

USB 3.0/USB 3.1 Gen 1 achieves the much higher performance by the technical changes below:

• An additional physical bus that is added in parallel with the existing USB 2.0 bus (refer to the picture below).

• USB 2.0 previously had four wires (power, ground, and a pair for differential data); USB 3.0/USB 3.1 Gen 1 adds four more for two

pairs of differential signals (receive and transmit) for a combined total of eight connections in the connectors and cabling.

• USB 3.0/USB 3.1 Gen 1 utilizes the bidirectional data interface, rather than USB 2.0's half-duplex arrangement. This gives a 10-fold

increase in theoretical bandwidth.

With today's ever increasing demands placed on data transfers with high-definition video content, terabyte storage devices, high

megapixel count digital cameras etc., USB 2.0 may not be fast enough. Furthermore, no USB 2.0 connection could ever come close to the

480Mbps theoretical maximum throughput, making data transfer at around 320Mbps (40MB/s) — the actual real-world maximum.

Similarly, USB 3.0/USB 3.1 Gen 1 connections will never achieve 4.8Gbps. We will likely see a real-world maximum rate of 400MB/s with

overheads. At this speed, USB 3.0/USB 3.1 Gen 1 is a 10x improvement over USB 2.0.

Applications

USB 3.0/USB 3.1 Gen 1 opens up the laneways and provides more headroom for devices to deliver a better overall experience. Where USB

video was barely tolerable previously (both from a maximum resolution, latency, and video compression perspective), it's easy to imagine

that with 5-10 times the bandwidth available, USB video solutions should work that much better. Single-link DVI requires almost 2Gbps

throughput. Where 480Mbps was limiting, 5Gbps is more than promising. With its promised 4.8Gbps speed, the standard will find its way

into some products that previously weren't USB territory, like external RAID storage systems.

Listed below are some of the available SuperSpeed USB 3.0/USB 3.1 Gen 1 products:

• External Desktop USB 3.0/USB 3.1 Gen 1 Hard Drives

• Portable USB 3.0/USB 3.1 Gen 1 Hard Drives

• USB 3.0/USB 3.1 Gen 1 Drive Docks & Adapters

• USB 3.0/USB 3.1 Gen 1 Flash Drives & Readers

• USB 3.0/USB 3.1 Gen 1 Solid-state Drives

• USB 3.0/USB 3.1 Gen 1 RAIDs

• Optical Media Drives

• Multimedia Devices

• Networking

• USB 3.0/USB 3.1 Gen 1 Adapter Cards & Hubs

Technology and components 11

Compatibility

The good news is that USB 3.0/USB 3.1 Gen 1 has been carefully planned from the start to peacefully co-exist with USB 2.0. First of all,

while USB 3.0/USB 3.1 Gen 1 specifies new physical connections and thus new cables to take advantage of the higher speed capability of

the new protocol, the connector itself remains the same rectangular shape with the four USB 2.0 contacts in the exact same location as

before. Five new connections to carry receive and transmitted data independently are present on USB 3.0/USB 3.1 Gen 1 cables and only

come into contact when connected to a proper SuperSpeed USB connection.

Identifier GUID-FE817021-3E34-484B-8473-9251FB6EC028

Version 5

Status Released

USB Type-C

USB Type-C is a new, tiny physical connector. The connector itself can support various exciting new USB standards like USB 3.1 and USB

power delivery (USB PD).

Alternate Mode

USB Type-C is a new connector standard that is very small. It is about a third the size of an old USB Type-A plug. This is a single

connector standard that every device should be able to use. USB Type-C ports can support a variety of different protocols using

“alternate modes,” which allows you to have adapters that can output HDMI, VGA, DisplayPort, or other types of connections from that

single USB port

USB Power Delivery

The USB PD specification is also closely intertwined with USB Type-C. Currently, smartphones, tablets, and other mobile devices often

use a USB connection to charge. A USB 2.0 connection provides up to 2.5 watts of power — that'll charge your phone, but that's about

it. A laptop might require up to 60 watts, for example. The USB Power Delivery specification ups this power delivery to 100 watts. It's bi-

directional, so a device can either send or receive power. And this power can be transferred at the same time the device is transmitting

data across the connection.

This could spell the end of all those proprietary laptop charging cables, with everything charging via a standard USB connection. You could

charge your laptop from one of those portable battery packs you charge your smartphones and other portable devices from today. You

could plug your laptop into an external display connected to a power cable, and that external display would charge your laptop as you used

it as an external display — all via the one little USB Type-C connection. To use this, the device and the cable have to support USB Power

Delivery. Just having a USB Type-C connection doesn't necessarily mean they do.

USB Type-C and USB 3.1

USB 3.1 is a new USB standard. USB 3's theoretical bandwidth is 5 Gbps, while USB 3.1's is 10 Gbps. That's double the bandwidth, as fast

as a first-generation Thunderbolt connector. USB Type-C isn't the same thing as USB 3.1. USB Type-C is just a connector shape, and the

underlying technology could just be USB 2 or USB 3.0. In fact, Nokia's N1 Android tablet uses a USB Type-C connector, but underneath

it's all USB 2.0 — not even USB 3.0. However, these technologies are closely related.

Thunderbolt over USB Type-C

Thunderbolt is a hardware interface that combines data, video, audio, and power in a single connection. Thunderbolt combines PCI

Express (PCIe) and DisplayPort (DP) into one serial signal, and additionally provides DC power, all in one cable. Thunderbolt 1 and

Thunderbolt 2 use the same connector as miniDP (DisplayPort) to connect to peripherals, while Thunderbolt 3 uses a USB Type-C

connector.

12 Technology and components

Figure 1. Thunderbolt 1 and Thunderbolt 3

1. Thunderbolt 1 and Thunderbolt 2 (using a miniDP connector)

2. Thunderbolt 3 (using a USB Type-C connector)

Thunderbolt 3 over USB Type-C

Thunderbolt 3 brings Thunderbolt to USB Type-C at speeds up to 40 Gbps, creating one compact port that does it all - delivering the

fastest, most versatile connection to any dock, display or data device like an external hard drive. Thunderbolt 3 uses a USB Type-C

connector/port to connect to supported peripherals.

1. Thunderbolt 3 uses USB Type-C connector and cables - It is compact and reversible

2. Thunderbolt 3 supports speed up to 40 Gbps

3. DisplayPort 1.4 – compatible with existing DisplayPort monitors, devices and cables

4. USB Power Delivery - Up to 130W on supported computers

Key Features of Thunderbolt 3 over USB Type-C

1. Thunderbolt, USB, DisplayPort and power on USB Type-C on a single cable (features vary between different products)

2. USB Type-C connector and cables which are compact and reversible

3. Supports Thunderbolt Networking (*varies between different products)

4. Supports up to 4K displays

5. Up to 40 Gbps

NOTE: Data transfer speed may vary between different devices.

Thunderbolt Icons

Figure 2. Thunderbolt Iconography Variations

Identifier GUID-928B6E64-CA13-4C79-94DA-25C5A8226A96

Version 1

Status Released

HDMI 1.4a

This topic explains the HDMI 1.4a and its features along with the advantages.

HDMI (High-Definition Multimedia Interface) is an industry-supported, uncompressed, all-digital audio/video interface. HDMI provides an

interface between any compatible digital audio/video source, such as a DVD player, or A/V receiver and a compatible digital audio and/or

video monitor, such as a digital TV (DTV). The intended applications for HDMI TVs, and DVD players. The primary advantage is cable

Technology and components 13

reduction and content protection provisions. HDMI supports standard, enhanced, or high-definition video, plus multichannel digital audio

on a single cable.

HDMI 1.4a Features

•HDMI Ethernet Channel - Adds high-speed networking to an HDMI link, allowing users to take full advantage of their IP-enabled

devices without a separate Ethernet cable

•Audio Return Channel - Allows an HDMI-connected TV with a built-in tuner to send audio data "upstream" to a surround audio

system, eliminating the need for a separate audio cable

•3D - Defines input/output protocols for major 3D video formats, paving the way for true 3D gaming and 3D home theater applications

•Content Type - Real-time signaling of content types between display and source devices, enabling a TV to optimize picture settings

based on content type

•Additional Color Spaces - Adds support for additional color models used in digital photography and computer graphics

•4K Support - Enables video resolutions far beyond 1080p, supporting next-generation displays that will rival the Digital Cinema

systems used in many commercial movie theaters

•HDMI Micro Connector - A new, smaller connector for phones and other portable devices, supporting video resolutions up to 1080p

•Automotive Connection System - New cables and connectors for automotive video systems, designed to meet the unique

demands of the motoring environment while delivering true HD quality

Advantages of HDMI

• Quality HDMI transfers uncompressed digital audio and video for the highest, crispest image quality.

• Low -cost HDMI provides the quality and functionality of a digital interface while also supporting uncompressed video formats in a

simple, cost-effective manner

• Audio HDMI supports multiple audio formats from standard stereo to multichannel surround sound

• HDMI combines video and multichannel audio into a single cable, eliminating the cost, complexity, and confusion of multiple cables

currently used in A/V systems

• HDMI supports communication between the video source (such as a DVD player) and the DTV, enabling new functionality

Identifier GUID-458DCF35-3CE4-4248-9912-1C484DF4847A

Version 1

Status Released

Power button LED behavior

On certain Dell Latitude systems, the power button LED is used to provide an indication of the system status, and as a result the power

button illuminates when pressed. The systems with the optional power button/fingerprint reader will have no LED under the power button

and hence will apply the available LED's in the system to provide an indication of the system status.

Power button LED behavior without Fingerprint reader

• System is ON (S0) = LED illuminates solid white.

• System in Sleep/Standby (S3, SOix) = LED is off

• System is Off/Hibernating (S4/S5) = LED is off

Power On and LED behavior with Fingerprint reader

• Pressing the power button for a duration between 50 msec to 2 sec turns on the device.

• Power button does not register additional presses until the SOL (Sign-Of-Life) has been provided to the user.

• System LED's illuminates upon pressing the power button.

• All the available LED's (Keyboard backlit/ Keyboard caps lock LED/ Battery Charge LED) illuminates and displays specified behavior.

• The auditory tone is Off by default. It can be enabled in the BIOS setup.

• Safeguards do not time out if the device gets hung during the logon process.

• Dell logo: Turns on within 2 secs after pressing the power button.

• Full boot: Within 22 secs after pressing the power button.

• Below is the example timelines:

14 Technology and components

Power button with fingerprint reader will have no LED and will leverage the available LED's in the system to provide indication of the

system status

•Power Adapter LED:

• The LED on Power adapter connector illuminates white when power is supplied from electrical outlet.

•Battery Indicator LED:

• If the computer is connected to an electrical outlet, the battery light operates as follows:

1. Solid white -the battery is charging. When the charge is complete the LED turns off.

• If the computer is running on a battery, the battery light operates as follows:

1. Off -the battery is adequately charged (or the computer is turned off).

2. Solid amber -the battery charge is critically low. A low battery state is approximately 30 minutes or less of battery life

remaining.

•Camera LED

• White LED activates when camera is on.

•Mic Mute LED:

• When activated (muted), the mic mute LED on the F4 Key should illuminate WHITE.

•RJ45 LEDs:

•Table 2. LED on either side of RJ45 port

Link speed indicator (LHS) Activity indicator (RHS)

Green Amber

Technology and components 15

16 Major components of your system

Identifier GUID-D19979B5-7163-4B38-8EF3-4156C44A962B

Version 2

Status Released

Major components of your system

1. Base cover

2. Heatsink

3. DC-in port

Major components of your system 17

4. System fan

5. System board

6. Battery

7. Inner frame

8. Speakers

9. SmartCard reader

10. Touchpad button board

11. LED board

12. Palmrest assembly

13. Display assembly

14. Solid-state drive

15. Memory module

16. WLAN card

17. Coin-cell battery

NOTE: Dell provides a list of components and their part numbers for the original system configuration purchased. These

parts are available according to warranty coverages purchased by the customer. Contact your Dell sales representative

for purchase options.

18 Major components of your system

Identifier GUID-9CB09CFA-BBF6-48B0-BC0F-9CDA94C3FA42

Version 2

Status Released

Disassembly and reassembly

Identifier GUID-63EE5D3E-C6D5-46E2-B3A7-0FD2071B1AED

Version 1

Status Released

MicroSD card

Identifier GUID-F0A17FA4-16DE-441F-81E1-840700B20DA4

Version 1

Status Released

Removing the microSD card

Prerequisites

1. Follow the procedure in Before working inside your computer.

Steps

1. Push the microSD card to release it from the computer [1].

2. Slide the microSD card out of the computer [2].

Disassembly and reassembly 19

Identifier GUID-9AE74FD9-FEB5-493F-8037-FC2E3FCEC51E

Version 1

Status Released

Installing the microSD card

Steps

1. Align the microSD card to its slot on the computer [1].

2. Slide the microSD card into the slot until it clicks into place [2].

3. Follow the procedures in After working inside your computer.

Identifier GUID-011AA877-0F90-479B-BF50-6CDFB72AD6D8

Version 2

Status Released

Base cover

Identifier GUID-98FD4C94-4CC7-4090-913D-6DDC0D5D56DD

Version 1

Status Released

Removing the base cover

Prerequisites

1. Follow the procedure in before working inside your computer

2. Remove the microSD card.

Steps

1. Loosen the eight captive screws [1].

20 Disassembly and reassembly

2. Using a plastic scribe [1], pry the base cover from the top-left corner and continue to work on the sides to open the base cover [2].

Disassembly and reassembly 21

3. Lift and remove the base cover away from the computer.

Identifier GUID-CB586B54-6390-4C46-9363-18996241BBE3

Version 1

Status Released

Installing the base cover

Steps

1. Align and place the base cover on the computer.

22 Disassembly and reassembly

2. Press the edges and sides of the base cover until it snaps into place.

Disassembly and reassembly 23

3. Tighten the eight captive screws to secure the base cover to the computer.

24 Disassembly and reassembly

Next steps

1. Replace the microSD card.

2. Follow the procedure in after working inside your computer.

Identifier GUID-F65273B2-AF5E-4C69-B895-7CEF2148F79D

Version 1

Status Released

Battery

Identifier GUID-22C7DCB3-8D29-41D7-8D51-D90ABC7C2D63

Version 10

Status Released

Lithium-ion battery precautions

CAUTION:

• Exercise caution when handling Lithium-ion batteries.

• Discharge the battery as much as possible before removing it from the system. This can be done by disconnecting

the AC adapter from the system to allow the battery to drain.

• Do not crush, drop, mutilate, or penetrate the battery with foreign objects.

• Do not expose the battery to high temperatures, or disassemble battery packs and cells.

• Do not apply pressure to the surface of the battery.

• Do not bend the battery.

• Do not use tools of any kind to pry on or against the battery.

• Ensure any screws during the servicing of this product are not lost or misplaced, to prevent accidental puncture or

damage to the battery and other system components.

• If the battery gets stuck inside your computer as a result of swelling, do not try to release it as puncturing, bending,

or crushing a lithium-ion battery can be dangerous. In such an instance, contact Dell technical support for

assistance. See www.dell.com/contactdell.

• Always purchase genuine batteries from www.dell.com or authorized Dell partners and resellers.

Identifier GUID-0A997AEF-81BC-42C1-B357-8AF541CA2CAC

Version 1

Status Released

Removing the battery

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

Steps

1. Disconnect the battery cable from the connector on the system board.

Disassembly and reassembly 25

2. Loosen the single captive screw that secures the battery to the palmrest [1].

3. Slide the battery inward and lift the battery away from the palmrest [2].

26 Disassembly and reassembly

Identifier GUID-1A6EB442-DF40-400F-8FF6-BFFCD8E5CE20

Version 2

Status Released

Installing the battery

Steps

1. Align and slide the battery on the palmrest [1].

2. Tighten the single captive screw to secure the battery to the palmrest [2].

Disassembly and reassembly 27

3. Connect the battery cable to the connector on the system board.

28 Disassembly and reassembly

Next steps

1. Replace the base cover.

2. Replace the microSD card.

3. Follow the procedure in after working inside your computer

Identifier GUID-73AD304C-089F-4473-B6E5-1DBC67A93B4A

Version 1

Status Released

WWAN card

Identifier GUID-91EA1833-328C-4AB0-8C33-5AD09A3AB785

Version 1

Status Released

Removing the WWAN card

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

Steps

1. Remove the single (M2x3) screw that secures the WWAN card bracket to the system board [1].

2. Remove the WWAN card bracket that secures the WWAN antenna cables [2].

3. Disconnect the WWAN antenna cables from the connectors on the WWAN card [3].

Disassembly and reassembly 29

4. Slide and lift the WWAN card away from the connector on the system board [4].

Identifier GUID-F1E8C2AA-14C9-4204-807B-D725699B398A

Version 1

Status Released

Installing the WWAN card

About this task

CAUTION: To avoid damage to the WWAN card, do not place any cables under it.

Steps

1. Insert the WWAN card into the connector on the system board [1].

2. Connect the WWAN antenna cables to the connectors on the WWAN card [2].

3. Place the WWAN card bracket to secure the WWAN antenna cables to the WWAN card [3].

4. Replace the single (M2x3) screw to secure the WWAN card bracket to the WWAN card [4].

Next steps

1. Replace the battery.

2. Replace the base cover.

3. Replace the microSD card.

4. Follow the procedure in after working inside your computer.

Identifier GUID-9DA8AD62-C8EF-4ECB-8C0C-2EFF7D88D28D

Version 1

Status Released

WLAN card

Identifier GUID-8C6C67EE-41A7-42A1-B986-24BFD07A78C6

Version 1

Status Released

Removing the WLAN card

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

Steps

1. Remove the single (M2x3) screw that secures the WLAN card bracket to the system board [1].

2. Remove the WLAN card bracket that secures the WLAN antenna cables [2].

3. Disconnect the WLAN antenna cables from the connectors on the WLAN card [3].

4. Slide and lift the WLAN card away from the connector on the system board [4].

30 Disassembly and reassembly

Identifier GUID-A46E7AF3-0460-41D8-B9A7-A038E5CAFBEC

Version 1

Status Released

Installing the WLAN card

About this task

CAUTION: To avoid damage to the WLAN card, do not place any cables under it.

Steps

1. Insert the WLAN card into the connector on the system board [1].

2. Connect the WLAN antenna cables to the connectors on the WLAN card [2].

3. Place the WLAN card bracket to secure the WLAN antenna cables to the WLAN card [3].

4. Replace the single (M2x3) screw to secure the WLAN card bracket to the WLAN card [4].

Disassembly and reassembly 31

Next steps

1. Replace the battery.

2. Replace the base cover.

3. Replace the microSD card.

4. Follow the procedure in after working inside your computer.

Identifier GUID-D99D5F9B-0FF3-406B-A51F-FFA061BB89EA

Version 1

Status Released

Coin-cell battery

Identifier GUID-02F5656A-6E28-4554-BBC8-C9A2CB79ED37

Version 2

Status Released

Removing the coin-cell battery

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

32 Disassembly and reassembly

Steps

1. Disconnect the coin cell battery cable from the connector on the system board [1].

2. Lift the coin cell battery from the system board [2].

Identifier GUID-39F50FD8-FA1B-4ACA-8548-A89BB24D1DF1

Version 1

Status Released

Installing the coin-cell battery

Steps

1. Place the coin cell on the system board [1].

2. Connect the coin cell battery cable to the connector on the system board [2].

Disassembly and reassembly 33

Next steps

1. Replace the battery.

2. Replace the base cover.

3. Replace the microSD card.

4. Follow the procedure in after working inside your computer.

Identifier GUID-2A6DAE1B-1FBE-40F9-8D46-40E8C3FBD267

Version 2

Status Released

Memory modules

Identifier GUID-F5AF0750-F2A4-4A91-9AB2-7D2B57FD895E

Version 1

Status Released

Removing the memory module

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

Steps

1. Pry the retention clips securing the memory module until the memory module pops-up [1].

2. Remove the memory module from the memory module slot [2].

34 Disassembly and reassembly

Identifier GUID-9FD995AD-3357-4E0F-B560-DD4A9EF1D862

Version 1

Status Released

Installing the memory module

Steps

1. Align the notch on the memory module with the tab on the memory-module slot.

2. Slide the memory module firmly into the slot at an angle [1].

3. Press the memory module down until the clips secure it [2].

NOTE: If you do not hear the click, remove the memory module and reinstall it.

Disassembly and reassembly 35

Next steps

1. Replace the battery.

2. Replace the base cover.

3. Replace the microSD card.

4. Follow the procedure in after working inside your computer.

Identifier GUID-C4CE0064-C26D-4BF4-B9EB-FDA0DCCF5214

Version 1

Status Released

DC-in port

Identifier GUID-0B34534C-5084-4F7F-AFA5-499179D8E3B4

Version 2

Status Released

Removing the DC-in port

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

Steps

1. Remove the two (M2x5) screws that secure the Type-C bracket to the system board [1].

2. Lift the Type-C bracket away from the computer [2].

36 Disassembly and reassembly

3. Disconnect the DC-in port cable from the connector on the system board and remove the DC-in port from the computer [1, 2].

Disassembly and reassembly 37

Identifier GUID-039D5429-D7C6-40CE-8644-EB508EEDB56A

Version 2

Status Released

Installing the DC-in port

Steps

1. Place the DC-in port to its slot on the computer [1].

2. Connect the DC-in port cable to the connector on the system board [2].

38 Disassembly and reassembly

3. Place the Type-C bracket on its slot on the computer [1].

4. Replace the two (M2x5) screws to secure the Type-C bracket to the palmrest [2].

Disassembly and reassembly 39

Next steps

1. Replace the battery.

2. Replace the base cover.

3. Replace the microSD card.

4. Follow the procedure in after working inside your computer.

Identifier GUID-86AA98C2-379B-4E5D-BD58-4C8B331634A5

Version 1

Status Released

Solid state drive

Identifier GUID-689151C9-B9C2-4923-BB57-D9F8CB77D11B

Version 1

Status Released

Removing the M.2 SSD

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

40 Disassembly and reassembly

Steps

1. Remove the two (M2x3) screws that secure the M.2 SSD support bracket to the palmrest [1].

2. Slightly turn and remove the SSD support bracket from the M.2 SSD slot [2].

3. Remove the SSD of the SSD thermal plate.

Disassembly and reassembly 41

Identifier GUID-181B0EBE-58AD-438E-8389-2A9B1F8B0920

Version 1

Status Released

Installing the M.2 SSD

Steps

1. Place the M.2 SSD into the slot on the palmrest [1].

2. Align and place the SSD support bracket above the M.2 SSD [2].

3. Replace the two (M2x3) screws to secure the SSD support bracket to the palmrest [3].

Next steps

1. Replace the battery.

2. Replace the base cover.

3. Replace the microSD card.

4. Follow the procedure in after working inside your computer.

42 Disassembly and reassembly

Identifier GUID-FB830FE5-3093-48F7-B31D-BD1C88193E19

Version 1

Status Released

Solid state drive bracket

Identifier GUID-0515492D-AB99-43A9-9A72-A58AF6A4D253

Version 1

Status Released

Removing the solid state drive bracket

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

5. Remove the M.2 SSD.

Steps

1. Remove the single (M2x3) screw that secures the bracket to the palmrest [1].

2. Lift the SSD bracket of the slot on the palmrest [2].

Disassembly and reassembly 43

Identifier GUID-DFBB23BC-E314-42BE-8F6C-4ADA183A23AA

Version 1

Status Released

Installing the solid state drive bracket

Steps

1. Align the bracket and insert it into the slot on the palmrest [1].

2. Replace the single (M2x3) screw to secure the bracket to the palmrest [2].

Next steps

1. Replace the M.2 SSD.

2. Replace the battery.

3. Replace the base cover.

4. Replace the microSD card.

5. Follow the procedure in after working inside your computer.

44 Disassembly and reassembly

Identifier GUID-195DEDAA-42D1-4F14-AD30-7FD4F34E3B52

Version 1

Status Released

Inner frame

Identifier GUID-3EA77C69-6631-46AF-89AD-B6C0143D7646

Version 1

Status Released

Removing the inner frame

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

5. Remove the WLAN card.

6. Remove the M.2 SSD.

7. Remove the M.2 SSD bracket.

Steps

1. Unroute the WLAN antenna cables.

2. Remove the five (M2x5) screws that secure the inner frame to the system board [1].

3. Remove the six (M2x3) screws that secure the inner frame to the system chassis [2].

4. Lift the inner frame away from the system chassis [3].

Disassembly and reassembly 45

Identifier GUID-47E180F6-5CB2-41A8-A420-EC5A8664E0EF

Version 1

Status Released

Installing the inner frame

Steps

1. Align and place the inner frame on the system chassis [1].

2. Replace the six (M2x3) screws to secure the inner frame to the system chassis [2].

3. Replace the five (M2x5) screws to secure the inner frame to the system board [3].

46 Disassembly and reassembly

4. Reroute the WLAN antenna cables.

Disassembly and reassembly 47

Next steps

1. Replace the M.2 SSD holder.

2. Replace the M.2 SSD.

3. Replace the WLAN card.

4. Replace the battery.

5. Replace the base cover.

6. Replace the microSD card.

7. Follow the procedure in after working inside your computer.

Identifier GUID-8E36E5A7-C3FC-4324-8421-508CE8633FC0

Version 1

Status Released

SmartCard reader

Identifier GUID-C64FA8CC-E99A-4F99-8DA6-BE1B1D786A27

Version 1

Status Released

Removing the SmartCard reader

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

5. Remove the WLAN card.

48 Disassembly and reassembly

6. Remove the inner frame.

Steps

1. Disconnect the SmartCard reader flexible flat cable (FFC) from the connector on the USH board [1].

2. Peel the SmartCard FFC from the palmrest [2].

3. Remove the three (M2x3) screws that secure the smartcard reader to the palmrest [1].

4. Lift the smartcard reader board away from the palmrest [2].

Disassembly and reassembly 49

Identifier GUID-6818E795-2C6A-46F7-A176-20DCFDC13BA3

Version 1

Status Released

Installing the SmartCard reader

Steps

1. Place the smart card reader board on the palmrest [1].

2. Replace the three (M2x3) screws to secure the smartcard reader on the palmrest [2].

50 Disassembly and reassembly

3. Connect the smartcard reader FFC to the connector on the USH board [1].

4. Adhere the smartcard FFC to the palmrest [2].

Disassembly and reassembly 51

Next steps

1. Replace the inner frame.

2. Replace the WLAN card.

3. Replace the battery.

4. Replace the base cover.

5. Replace the microSD card.

6. Follow the procedure in after working inside your computer.

Identifier GUID-80F5F6BA-58C2-4A29-8A1B-394AD14098CB

Version 1

Status Released

Touchpad buttons

Identifier GUID-1959B445-2ADD-4329-A853-ED6D28B6CED1

Version 3

Status Released

Removing the touchpad button board

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

5. Remove the speaker.

52 Disassembly and reassembly

Steps

1. Open the latch and disconnect the smartcard reader Flexible Flat Cable (FFC) from the USH board [1].

2. Peel the smartcard reader FFC of the palmrest [2].

3. Open the latch and disconnect the touchpad button board cable from the connector on the touchpad board [1, 2].

Disassembly and reassembly 53

4. Remove the two (M2x3) screws that secure the touchpad button bracket to the palmrest [1].

5. Lift the touchpad button board bracket away from the computer [2].

54 Disassembly and reassembly

Identifier GUID-7ED707E3-9598-4436-AEA8-B66AC66EAB42

Version 1

Status Released

Installing the touchpad button board

Steps

1. Place the touchpad button board into the slot on the palmrest [1].

2. Replace the two (M2x3) screws to secure the touchpad button board to the palmrest [2].

Disassembly and reassembly 55

3. Connect the touchpad button board cable to the connector on the touchpad board [1, 2].

56 Disassembly and reassembly

4. Connect the Smartcard reader Flexible Flat Cable (FFC) to the USH board [1].

5. Adhere the FFC on the palmrest [2].

Next steps

1. Replace the speaker.

2. Replace the battery.

3. Replace the base cover.

4. Replace the microSD card.

5. Follow the procedure in after working inside your computer.

Identifier GUID-3ECC084E-0ED0-473F-9FB1-97CD08F96234

Version 2

Status Released

LED board

Identifier GUID-BF45531A-5DE2-420C-A51A-940E15427BBD

Version 1

Status Released

Removing the LED board

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

Disassembly and reassembly 57

Steps

1. Disconnect the LED board cable from the connector on the system board [1].

2. Unroute the LED board cable [2].

3. Remove the single (M2x3) screw that secures LED board to the palmrest [1].

4. Lift the LED board away from the computer [2].

58 Disassembly and reassembly

Identifier GUID-2002B6CA-1873-4495-A80B-0BADB4778125

Version 1

Status Released

Installing the LED board

Steps

1. Place the LED board and align the screw hole on the LED board with the screw hole on the palmrest [1].

2. Replace the single (M2x3) screw to secure the LED board to the palmrest [2].

Disassembly and reassembly 59

3. Connect the LED board cable to the connector on the system board and route the LED board cable [1, 2].

60 Disassembly and reassembly

Next steps

1. Replace the battery.

2. Replace the base cover.

3. Replace the microSD card.

4. Follow the procedure in after working inside your computer.

Identifier GUID-A6445DA5-405C-4BDA-A929-FE53DC4A83F6

Version 1

Status Released

Speakers

Identifier GUID-53E8934D-BFCD-475C-9869-6ECF835CBE67

Version 1

Status Released

Removing the speakers

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

Steps

1. Disconnect the speaker cable from the connector on the system board [1].

2. Peel the adhesive tapes and unroute the speaker cable [2, 3].

3. Lift and remove the speakers away from the palmrest.

Disassembly and reassembly 61

Identifier GUID-62B31754-D1D8-44B3-8460-5D7080F724FB

Version 1

Status Released

Installing the speakers

Steps

1. Using the alignment posts and rubber grommets, place the speakers in the slots on the palmrest.

2. Route the speaker cable through the routing guides.

62 Disassembly and reassembly

3. Affix the adhesive tape to secure speaker cable to the palmrest [1].

4. Connect the speaker cable to the connector on the system board [2, 3].

Disassembly and reassembly 63

Next steps

1. Replace the battery.

2. Replace the base cover.

3. Replace the microSD card.

4. Follow the procedure in after working inside your computer.

Identifier GUID-666A4AFB-C2AC-482B-8E5F-5414295A6248

Version 1

Status Released

Heatsink assembly

Identifier GUID-32C30F22-74B9-4174-8B1E-E0F15556AB9D

Version 1

Status Released

Removing the heatsink assembly

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

5. Remove the inner frame.

Steps

1. Disconnect the system fan cable from the connector on the system board.

64 Disassembly and reassembly

2. Remove the six (M2x3) screws that secure the heatsink assembly to the system board [1].

NOTE: Remove the screws in the order of the callout numbers [1, 2, 3, 4, 5, 6] as indicated on the heatsink.

3. Remove the two (M2x3) screws that secure the fan section of heatsink to the system board and lift the heatsink assembly [2].

Disassembly and reassembly 65

Identifier GUID-D5984BF4-CE41-4D62-A9CF-309744B020FB

Version 1

Status Released

Installing the heatsink assembly

Steps

1. Place the heatsink assembly on the system board and align the screw holes on the heatsink with the screw holes on the system board

[1].

2. Replace the two (M2x3) screws that secure the fan section of the heatsink assembly to the system board.

3. In sequential order (as indicated on the heatsink), tighten the six (M2x3) screws that secure the heatsink assembly to the system

board [2].

66 Disassembly and reassembly

4. Connect the system fan cable from the connector on the system board.

Disassembly and reassembly 67

Next steps

1. Replace the inner frame.

2. Replace the battery.

3. Replace the base cover.

4. Replace the microSD card.

5. Follow the procedure in after working inside your computer.

Identifier GUID-46B53388-5C4F-4861-92E0-6AE357EE9CBF

Version 2

Status Released

System board

Identifier GUID-6DB3D67E-A1AA-464A-B760-CADD87A43B59

Version 1

Status Released

Removing the system board

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

5. Remove the memory module.

6. Remove the WLAN card.

7. Remove the coincell battery.

68 Disassembly and reassembly

8. Remove the DC-in .

9. Remove the M.2 SSD .

10. Remove the heatsink assembly.

Steps

1. Lift the latch and disconnect the following cables from the system board:

a) Speaker cable [1].

b) LED board cable [2].

c) USH FFC [3].

d) Touchpad FFC [4].

2. Remove the single (M2x3) screw that secures the fingerprint support bracket to the system board [1].

3. Lift the fingerprint support bracket away from the computer [2].

4. Disconnect the fingerprint port [3].

Disassembly and reassembly 69

5. Peel the adhesive tape on the eDP cable that is connected to the system board [1].

6. Remove the two (M2x3) screws that secure the eDP bracket to the system board [2].

7. Remove the eDP bracket away from the computer [3].

8. Lift the latch and disconnect the eDP cable from the connector on the system board [4].

9. Disconnect the cable from the connector on the system board [5].

70 Disassembly and reassembly

10. Remove the two (M2x3) screws that secure the system board to the palmrest [1].

11. Lift the system board away from the computer [2].

Disassembly and reassembly 71

Identifier GUID-23447400-2839-4578-81DC-BF0880D5CAF6

Version 1

Status Released

Installing the system board

Steps

1. Align and place the system board on the palmrest [1].

2. Replace the two (M2x3) screws to secure the system board to the palmrest [2].

72 Disassembly and reassembly

3. Connect the cable to the connector on the system board [1].

4. Connect the eDP cable to the connector on the system board [2].

5. Place the eDP support bracket above the eDP connector [3].

6. Replace the two (M2x3) screws to secure the eDP bracket to the system board [4].

7. Adhere the adhesive tape on the eDP cable that is connected to the system board [5].

Disassembly and reassembly 73

8. Connect the fingerprint cable to the connector on the system board [1].

9. Place the fingerprint support bracket [2].

10. Replace the single (M2x3) screw to secure the fingerprint support bracket to the system board [3].

74 Disassembly and reassembly

11. Connect the following cables to the system board:

a) Speaker cable [1].

b) LED board cable [2].

c) USH FFC [3]

d) Touchpad FFC [4].

Disassembly and reassembly 75

Next steps

1. Replace the heatsink assembly.

2. Replace the M.2 SSD.

3. Replace the DC-in.

4. Replace the coin cell battery.

5. Replace the WLAN card.

6. Replace the memory module.

7. Replace the battery.

8. Replace the base cover.

9. Replace the microSD card.

10. Follow the procedure in after working inside your computer.

76 Disassembly and reassembly

Identifier GUID-4C515B79-1E41-441F-8CF0-3B3961FF0692

Version 1

Status Released

Keyboard

Identifier GUID-CC7B2493-5F01-4783-B9A1-CA9030FE96E6

Version 3

Status Released

Removing the keyboard

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

5. Remove the speaker.

6. Remove the memory module.

7. Remove the DC-in .

8. Remove the WLAN card.

9. Remove the system board.

NOTE: System board can be removed with heatsink assembly attached.

10. Remove the coin cell battery.

Steps

1. Lift the latch and disconnect the backlit cable and the keyboard cable from the connectors on the touchpad.

2. Remove the 18 (M2x2.5) screws that secure the keyboard to the palmrest [1].

Disassembly and reassembly 77

3. NOTE: The touchpad FFC covers one of the screws that secure the keyboard assembly to the palmrest.

Remove the keyboard away from the computer [2].

Identifier GUID-97721580-0A18-4E75-A4C1-50191173A382

Version 2

Status Released

Installing the keyboard

Steps

1. Align and place the keyboard on the palmrest [1].

2. Replace the 18 (M2x2.5) screws to secure the keyboard to the palmrest [2].

78 Disassembly and reassembly

3. Connect the backlit cable and the keyboard cable to the connectors on the touchpad.

Disassembly and reassembly 79

Next steps

1. Replace the coin cell battery.

2. Replace the system board.

NOTE: System board can be replaced with heatsink assembly attached.

3. Replace the WLAN card.

4. Replace the DC-in.

5. Replace the memory module.

6. Replace the speaker.

7. Replace the battery.

8. Replace the base cover.

9. Replace the microSD card.

10. Follow the procedure in after working inside your computer.

Identifier GUID-811392E4-9653-4FB7-8270-84E085203A88

Version 1

Status Released

Keyboard bracket

Identifier GUID-CAD9B089-5B35-4B2E-A940-D07B7C7C0E4B

Version 1

Status Released

Removing the keyboard bracket

Prerequisites

1. Follow the procedure in before working inside your computer.

80 Disassembly and reassembly

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

5. Remove the speaker.

6. Remove the memory module.

7. Remove the DC-in .

8. Remove the WLAN card.

9. Remove the system board.

NOTE: System board can be removed with heatsink assembly attached.

10. Remove the coin cell battery.

11. Remove the keyboard.

Steps

1. Remove the six (M2x2) screws that secure the keyboard to the keyboard bracket [1].

2. Remove the keyboard from the keyboard bracket [2].

Identifier GUID-8445E5D3-70DF-40B2-9874-2A4D8AEAEC53

Version 1

Status Released

Installing the keyboard bracket

Steps

1. Align and place the keyboard on the keyboard bracket [1].

2. Replace the six (M2x2) screws to secure the keyboard on the keyboard bracket [2].

Disassembly and reassembly 81

Next steps

1. Replace the keyboard.

2. Replace the coin cell battery.

3. Replace the system board.

NOTE: System board can be replaced with heatsink assembly attached.

4. Replace the WLAN card.

5. Replace the DC-in.

6. Replace the memory module.

7. Replace the speaker.

8. Replace the battery.

9. Replace the base cover.

10. Replace the microSD card.

11. Follow the procedure in after working inside your computer.

82 Disassembly and reassembly

Identifier GUID-E321A5CC-D2B7-43DD-AE2B-6520F1A4D253

Version 2

Status Released

Power button

Identifier GUID-6D2CCEEF-5BDF-4B77-96EE-E04DF3A9100B

Version 1

Status Released

Removing the power button with fingerprint reader

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

5. Remove the speaker.

6. Remove the memory module.

7. Remove the DC-in .

8. Remove the WLAN card.

9. Remove the system board.

NOTE: System board can be removed with heatsink assembly attached.

10. Remove the coin cell battery.

11. Remove the keyboard.

Steps

1. Remove the two (M2x3) screws that secure the power button with fingerprint reader on the palmrest [1].

2. Lift the power button with fingerprint reader board off the palmrest [2].

Disassembly and reassembly 83

Identifier GUID-0E9E6F81-34B0-496A-ACD5-1250D7C4DEFE

Version 1

Status Released

Installing the power button with fingerprint reader

Steps

1. Place the power button with fingerprint reader on the palmrest [1].

2. Replace the two (M2x3) screws that secure the power button with fingerprint reader on the palmrest [2].

84 Disassembly and reassembly

Next steps

1. Replace the keyboard.

2. Replace the coin cell battery.

3. Replace the system board.

NOTE: System board can be replaced with heatsink assembly attached.

4. Replace the WLAN card.

5. Replace the DC-in.

6. Replace the memory module.

7. Replace the speaker.

8. Replace the battery.

9. Replace the base cover.

10. Replace the microSD card.

11. Follow the procedure in after working inside your computer.

Disassembly and reassembly 85

Identifier GUID-E641BD48-9062-46FE-8F5A-723887A0921D

Version 2

Status Released

Display assembly

Identifier GUID-21272E8B-E9C8-4B63-BC0A-89BA0C777E03

Version 1

Status Released

Removing the display assembly

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

5. Remove the WLAN card.

Steps

1. Unroute the wireless antenna from the routing guides on the system board [1].

2. Peel off the tape securing the eDP cable bracket [2].

3. Remove the two (M2x3) screws that secures the eDP cable bracket to the system board [3].

4. Lift the eDP cable bracket from the system board [4].

5. Disconnect and unroute the eDP cable [5, 6].

86 Disassembly and reassembly

6. Open the display assembly to a 180-degree angle and flip over the system, then place the system on a flat surface.

Disassembly and reassembly 87

7. Remove the four (M2.5x5) screws that secures the display assembly to the system chassis [1].

8. Remove the display assembly from the system [2].

88 Disassembly and reassembly

Identifier GUID-CE374173-CDB8-4775-8649-E24BBAE0959A

Version 1

Status Released

Installing the display assembly

About this task

NOTE: Ensure that the hinges are opened to the maximum before replacing the display assembly on the palmrest.

Steps

1. Align and place the system chassis under the hinges of the display assembly [1].

2. Replace the four (M2.5x5) screws that secure the display assembly to the system chassis [2].

Disassembly and reassembly 89

3. Seat the system chassis on the display assembly.

90 Disassembly and reassembly

4. Reroute the wireless antenna through the routing guides on the system board [1].

5. Connect the cable to the connector on the system board [2].

6. Connect the eDP cable to the eDP connector on the system board [3].

7. Place the eDP cable bracket on the system board [4].

8. Replace the two (M2x3) screws that secure the eDP cable bracket to the system board [5].

9. Adhere the tape securing the eDP cable bracket on the system board [6].

Disassembly and reassembly 91

Next steps

1. Replace the WLAN card.

2. Replace the battery.

3. Replace the base cover.

4. Replace the microSD card.

5. Follow the procedure in after working inside your computer.

Identifier GUID-7B4AB0D1-889B-4630-9CA4-9357E8DA5E67

Version 1

Status Released

Display bezel

Identifier GUID-64E82B6B-9DF4-4A46-B1E9-DEA79B0416B1

Version 3

Status Released

Removing display bezel

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

92 Disassembly and reassembly

4. Remove the battery.

5. Remove the display assembly.

Steps

1. NOTE: Display bezel cannot be reused after being removed.

Use a plastic scribe to carefully pry open the recesses near the left and right hinges on the bottom edge of the display bezel [1].

2. CAUTION: When prying open the display bezel, ensure to pry along the outside edge of the display bezel using your

hands or plastic scribes—using a screw driver or other sharp objects may damage the display cover.

Carefully pry open the inside edge of the display bezel and then pry open the inside edge of the left and right sides of the display bezel

[2].

3. Lift the display bezel from the display assembly.

Disassembly and reassembly 93

Identifier GUID-DDA05F95-4DF0-4E53-9CFD-0F4F4DC3B33B

Version 2

Status Released

Installing the display bezel

Steps

Align the display bezel with the display assembly, and then gently snap the display bezel into place.

94 Disassembly and reassembly

Disassembly and reassembly 95

Next steps

1. Replace the display assembly.

2. Replace the battery.

3. Replace the base cover.

4. Replace the microSD card.

5. Follow the procedure in after working inside your computer.

Identifier GUID-E0788C61-C654-46B3-8D36-621573FA8111

Version 1

Status Released

Display panel

Identifier GUID-519D4D6E-15EB-4084-A9B1-63285C9CD48A

Version 3

Status Released

Removing display panel

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

5. Remove the display assembly.

6. Remove the display bezel.

7. Remove the hinge caps.

8. Remove the display hinges.

Steps

1. Remove the two (M2.5x3) screws that secure the display panel to the display assembly [1] and lift to turn over the display panel to

access the display cable [2].

96 Disassembly and reassembly

2. Peel the conductive tape [1] on the display cable connector.

3. Remove the adhesive strip that secures the display cable connector [2].

4. Lift the latch and disconnect the display cable from the connector on the display panel [3, 4].

NOTE: Do not pull and release the Stretch (SR) Tapes from the display panel. There is no need to separate the

brackets from the display panel.

Disassembly and reassembly 97

98 Disassembly and reassembly

Identifier GUID-1293BA35-A3CF-451F-ABCF-9AF6562C9DCC

Version 4

Status Released

Installing display panel

Steps

1. Connect the display cable to the connector and close the latch [1, 2].

2. Adhere the adhesive strip to secure the display cable connector [3].

3. Adhere the conductive tape to secure the display cable connector [4].

4. NOTE: LCD Panel comes with two (L+R) brackets that needs to toe-in first, then secure two screws located at the

base of the LCD panel.

Replace the two (M2.5x3) screws that secure the display panel to the display assembly.

Disassembly and reassembly 99

Next steps

1. Replace the display hinges.

2. Replace the hinge caps.

3. Replace the display bezel.

4. Replace the display assembly.

5. Replace the battery.

6. Replace the base cover.

7. Replace the microSD card.

8. Follow the procedure in after working inside your computer.

Identifier GUID-B2F0CB60-3ABC-4810-802B-5FAA7A1515DC

Version 2

Status Released

Camera

Identifier GUID-291154A4-BEF5-4F03-ACE3-93A2EDA3CC98

Version 2

Status Released

Removing camera

Prerequisites

1. Follow the procedure in before working inside your computer.

100 Disassembly and reassembly

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

5. Remove the display assembly.

6. Remove the display bezel.

7. Remove the hinge caps.

8. Remove the display hinges.

9. Remove the display panel.

Steps

1. Peel the two conductive tape that secures the camera in place [1].

2. Carefully pry and lift the camera module from the display back cover [2].

3. Disconnect the camera cable from the connector on the camera module [3].

Identifier GUID-538EA3F4-D3AA-4480-A39D-B02344D85ADF

Version 2

Status Released

Installing camera

Steps

1. Connect the camera cable to the connector on the camera module [1].

2. Insert the camera into the slot on the display back cover [2].

3. Affix the two conductive tape above the camera [3].

Disassembly and reassembly 101

Next steps

1. Replace the display panel.

2. Replace the display hinges.

3. Replace the hinge caps.

4. Replace the display bezel.

5. Replace the display assembly.

6. Replace the battery.

7. Replace the base cover.

8. Replace the microSD card.

9. Follow the procedure in after working inside your computer.

102 Disassembly and reassembly

Identifier GUID-D72C2FA6-6BBB-4F75-89DE-140FC38A736A

Version 1

Status Released

Hinge caps

Identifier GUID-1DDB9396-7A0D-4FC4-80F1-4C90DF803CFC

Version 2

Status Released

Removing hinge caps

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

5. Remove the display assembly.

6. Remove the display bezel.

Steps

1. Remove the two (M2x3) screws that secure the hinge caps to the chassis [1].

2. Pinch the hinge caps to release the hinge caps from the ribs on the display back cover then slide inwards to remove the hinge caps

from the display hinge [2].

Disassembly and reassembly 103

Identifier GUID-3DE67D48-C372-40DE-AF9E-5A52988C68D0

Version 2

Status Released

Installing hinge caps

Steps

1. Place the hinge caps and slide outward on the display hinges [1].

2. Replace the two (M2x3) screws to secure the hinge caps to the display hinge.

Next steps

1. Replace the display bezel.

2. Replace the display assembly.

3. Replace the battery.

4. Replace the base cover.

5. Replace the microSD card.

6. Follow the procedure in after working inside your computer.

104 Disassembly and reassembly

Identifier GUID-D0DF1B3A-887B-49C0-A3C3-0FAC4F2797F4

Version 2

Status Released

Display hinges

Identifier GUID-D897508C-E0E6-42A9-BBD5-3750F0E965DA

Version 2

Status Released

Removing display hinge

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

5. Remove the display assembly.

6. Remove the display bezel.

7. Remove the hinge caps.

Steps

1. Remove the four (M2.5x3) screws that secure the display hinge to the display assembly [1].

2. Remove the display hinges from the display back cover [2].

Disassembly and reassembly 105

Identifier GUID-45EC7D3F-F078-4848-AFF3-5AAB7FF163D0

Version 2

Status Released

Installing display hinge

Steps

1. Place the display hinge on the display assembly.

2. Replace the four (M2.5x3) screws to secure the display hinge to the display assembly.

Next steps

1. Replace the hinge caps.

2. Replace the display bezel.

3. Replace the display assembly.

4. Replace the battery.

5. Replace the base cover.

6. Replace the microSD card.

7. Follow the procedure in after working inside your computer.

106 Disassembly and reassembly

Identifier GUID-8740CA68-8085-4163-9C5F-7EA3B0259190

Version 3

Status Released

Display (eDP) cable

Identifier GUID-75983381-DFB2-4D51-9385-41174165DE0C

Version 2

Status Released

Removing display cable

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

5. Remove the display assembly.

6. Remove the display bezel.

7. Remove the hinge caps.

8. Remove the display hinges.

9. Remove the display panel.

10. Remove the camera.

Steps

Peel the conductive tape and unroute the display cable to release it from adhesive and lift the display cable from the display back cover.

Disassembly and reassembly 107

Identifier GUID-5EBD2794-F8A9-41B9-AAF1-917E8DB5544B

Version 2

Status Released

Installing display cable

Steps

1. Adhere the display cable to the display back cover.

2. Adhere the conductive tape and route the display cable to the display back cover.

Next steps

1. Replace the camera.

2. Replace the display panel.

3. Replace the display hinges.

4. Replace the hinge caps.

5. Replace the display bezel.

6. Replace the display assembly.

7. Replace the battery.

8. Replace the base cover.

9. Replace the microSD card.

10. Follow the procedure in after working inside your computer.

108 Disassembly and reassembly

Identifier GUID-9CEB68C0-F0D6-4234-A078-9075DAAA0CA7

Version 2

Status Released

Display back cover assembly

Identifier GUID-30358244-B895-49F0-8CD3-B115D01D1887

Version 2

Status Released

Replacing the display back cover

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

5. Remove the display assembly.

6. Remove the display bezel.

7. Remove the hinge caps.

8. Remove the display hinges.

9. Remove the display panel.

10. Remove the camera.

11. Remove the display cable.

About this task

After performing the preceding steps, you are left with the display back cover.

Disassembly and reassembly 109

Next steps

1. Replace the display cable.

2. Replace the camera.

3. Replace the display panel.

4. Replace the display hinges.

5. Replace the hinge caps.

6. Replace the display bezel.

7. Replace the display assembly.

8. Replace the battery.

9. Replace the base cover.

10. Replace the microSD card.

11. Follow the procedure in after working inside your computer.

Identifier GUID-DCEE96B0-8F22-4569-89C7-44D76B1F8E9C

Version 1

Status Released

Palmrest assembly

Identifier GUID-EC0C51EF-347F-41AF-A8B9-AD8900AD5358

Version 2

Status Released

Replacing the palmrest and keyboard assembly

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the microSD card.

3. Remove the base cover.

4. Remove the battery.

5. Remove the speaker.

6. Remove the memory module.

7. Remove the DC-in .

8. Remove the WLAN card.

9. Remove the system board.

NOTE: System board can be removed with heatsink assembly attached.

10. Remove the coin cell battery.

11. Remove the keyboard.

12. Remove the SmartCard reader.

About this task

After performing the preceding steps, you are left with the palmrest and keyboard assembly.

110 Disassembly and reassembly

Next steps

1. Replace the SmartCard reader.

2. Replace the keyboard.

3. Replace the coin cell battery.

4. Replace the system board.

NOTE: System board can be replaced with heatsink assembly attached.

5. Replace the WLAN card.

6. Replace the DC-in.

7. Replace the memory module.

8. Replace the speaker.

9. Replace the battery.

10. Replace the base cover.

11. Replace the microSD card.

12. Follow the procedure in after working inside your computer.

Disassembly and reassembly 111

Identifier GUID-A27EB21E-BACD-423F-AC5C-DC2A051C2B48

Version 1

Status Released

Troubleshooting

Identifier GUID-EE9A5D95-88BE-4EE7-983E-D97C680BDECD

Version 5

Status Released

Enhanced Pre-Boot System Assessment (ePSA)

diagnostics

About this task

The ePSA diagnostics (also known as system diagnostics) performs a complete check of your hardware. The ePSA is embedded with the

BIOS and is launched by the BIOS internally. The embedded system diagnostics provides a set of options for particular devices or device

groups allowing you to:

• Run tests automatically or in an interactive mode

• Repeat tests

• Display or save test results

• Run thorough tests to introduce additional test options to provide extra information about the failed device(s)

• View status messages that inform you if tests are completed successfully

• View error messages that inform you of problems encountered during testing

NOTE: Some tests for specific devices require user interaction. Always ensure that you are present at the computer

terminal when the diagnostic tests are performed.

Identifier GUID-0B893EED-EFBC-4831-A9C4-7298A7A9F619

Version 1

Status Released

Running the ePSA diagnostics

Steps

1. Turn on your computer.

2. As the computer boots, press the F12 key as the Dell logo appears.

3. On the boot menu screen, select the Diagnostics option.

4. Click the arrow at the bottom left corner.

Diagnostics front page is displayed.

5. Click the arrow in the lower-right corner to go to the page listing.

The items detected are listed.

6. To run a diagnostic test on a specific device, press Esc and click Yes to stop the diagnostic test.

7. Select the device from the left pane and click Run Tests.

8. If there are any issues, error codes are displayed.

Note the error code and validation number and contact Dell.

112 Troubleshooting

Identifier GUID-F7E24B39-9988-47A8-8C7B-4F85BA0CF5DD

Version 3

Status Released

System diagnostic lights

Battery-status light

Indicates the power and battery-charge status.

Solid white — Power adapter is connected and the battery has more than 5 percent charge.

Amber — Computer is running on battery and the battery has less than 5 percent charge.

Off

• Power adapter is connected and the battery is fully charged.

• Computer is running on battery and the battery has more than 5 percent charge.

• Computer is in sleep state, hibernation, or turned off.

The power and battery-status light blinks amber along with beep codes indicating failures.

For example, the power and battery-status light blinks amber two times followed by a pause, and then blinks white three times followed by

a pause. This 2,3 pattern continues until the computer is turned off indicating no memory or RAM is detected.

The following table shows different power and battery-status light patterns and associated problems.

Table 3. LED codes

Diagnostic light codes Problem description

2,1 Processor failure

2,2 System board: BIOS or ROM (Read-Only Memory) failure

2,3 No memory or RAM (Random-Access Memory) detected

2,4 Memory or RAM (Random-Access Memory) failure

2,5 Invalid memory installed

2,6 System-board or chipset error

2,7 Display failure

2,8 LCD power rail failure. Replace system board

3,1 Coin-cell battery failure

3,2 PCI, video card/chip failure

3,3 Recovery image not found

3,4 Recovery image found but invalid

3,5 Power-rail failure

3,6 System BIOS Flash incomplete

3,7 Management Engine (ME) error

Camera status light: Indicates whether the camera is in use.

• Solid white — Camera is in use.

• Off — Camera is not in use.

Caps Lock status light: Indicates whether Caps Lock is enabled or disabled.

• Solid white — Caps Lock enabled.

• Off — Caps Lock disabled.

Troubleshooting 113

Identifier GUID-B4DD52FB-C0FE-4818-9D7C-A0D2BF4491D7

Version 1

Status Released

WiFi power cycle

About this task

If your computer is unable to access the internet due to WiFi connectivity issues a WiFi power cycle procedure may be performed. The

following procedure provides the instructions on how to conduct a WiFi power cycle:

NOTE: Some ISPs (Internet Service Providers) provide a modem/router combo device.

Steps

1. Turn off your computer.

2. Turn off the modem.

3. Turn off the wireless router.

4. Wait for 30 seconds.

5. Turn on the wireless router.

6. Turn on the modem.

7. Turn on your computer.

114 Troubleshooting

Identifier GUID-BE16C181-0959-44C3-B434-E44A0A602A4C

Version 13

Status Released

Getting help

Topics:

•Contacting Dell

Identifier GUID-7A3627F9-0363-4515-A1D4-1B7878F4B8C4

Version 13

Status Released

Contacting Dell

Prerequisites

NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice,

packing slip, bill, or Dell product catalog.

About this task

Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services

may not be available in your area. To contact Dell for sales, technical support, or customer service issues:

Steps

1. Go to Dell.com/support.

2. Select your support category.

3. Verify your country or region in the Choose a Country/Region drop-down list at the bottom of the page.

4. Select the appropriate service or support link based on your need.

Getting help 115

Table of Contents

DELL 5400 User Manual

Related Manuals