Edbak GD04 User Manual
Displayed below is the user manual for GD04 by Edbak which is a product in the TV Mounts category. This manual has pages.
Related Manuals
GD04
LCD/TFT Wall Mount 14“-26“
Installation Manual
SAFETY WARNING!
INSTRUCTIONS MUST BE FOLLOWED PRECISELY FOR SAFE AND STABLE INSTALLATION
1. Before installation read carefully this instruction manual and instruction manual of your LCD screen for
proper installation.
2. Installation of this unit should be carried out by at least two qualified technicians.
EDBAK is not liable for any damage or injury caused by mishandling or improper installation.
List of components:
GD04 LCD/TFT Wall Mount – 1 pcs
M410 Screw – 4 pcs
M420 Screw – 4 pcs
Allen Key No. 3 – 1 pcs
Installation Manual – 1 pcs
Drawing 1
Drawing 2a
Attaching back plate to wall
Mount back plate in desired position using
screw/bolts (not supplied) suitable to
construction of wall. (If you have any doubt
please consult a qualified builder). Mount
screws/bolts through all 3 holes.
Now please go on to drawing number 2a or
2b.
Attaching the mount to the back of the
LCD/TFT screen
If you want to mount a screen that is VESA
75x75 mm compliant use larger of supplied
screws (M4x20). Tighten the screws with the
supplied Allen key.
Drawing 2b (Part 1/2)
Drawing 2b (Part 2/2)
Assembling VESA 100x100 mm adapter
plate
If you want to mount a screen that is VESA
100x100 mm compliant, you have to
assemble the VESA 100x100 mm adapter
plate to VESA 75x75mm front plate using
smaller of supplied screws (M4x10). Tighten
the screws with the supplied Allen key.
Attaching the swing arm to the back of the
LCD/TFT screen
Using larger of supplied screws (M4x20)
attach swing arm to the back of the screen.
Tighten the screws with the supplied Allen
key.
EDBAK Sp. z o.o.
Piotrowice 186
23-107 Strzyżewice, PL
+48 81 562 81 19
www.edbak.com info@edbak.com
Rev.date: 13-02-2013 14:45
Instruction_manual_GD04[EN]_v.3.1.doc