Table of Contents
- FUJITSU LIFEBOOK E734 / FUJITSU LIFEBOOK E744 / FUJITSU LIFEBOOK E754
- Contents
- Fujitsu Contact Information
- Notational conventions
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Switching on the notebook
- Notebook: switching off
- Keyboard
- Application keys
- Touchpad and touchpad buttons
- LCD screen
- Webcam
- Rechargeable battery
- Modular bay devices
- Optical drive
- Removing and installing the removeable dust filter
- Using the power-management features
- SD cards
- Speakers and microphones
- SIM card
- Wireless LAN/Bluetooth/UMTS/LTE radio components
- Ethernet and LAN
- Your Port Replicator (optional)
- Security functions
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes – save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes – save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Help if problems occur
- Recovering your Factory Image
- The notebook's date or time is incorrect
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The notebook cannot be started
- The notebook stops working
- The printer does not print
- The radio connection to a network does not work
- Acoustic warnings
- SmartCard reader is not recognized
- SmartCard PIN forgotten
- SmartCard lost
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Fujitsu E754 User Manual
Displayed below is the user manual for E754 by Fujitsu which is a product in the Notebooks category. This manual has pages.
Related Manuals
System
Operating Manual
FUJITSU LIFEBOOK E734
FUJITSU LIFEBOOK E744
FUJITSU LIFEBOOK E754
Contact address in North America
FUJITSU AMERICA INC:
1250 East Arques Avenue Sunnyvale
CA 94085-3470, U.S.A.
Telephone: 800 831 3183 or 408 746 6000
"http://solutions.us.fujitsu.com"
"http://solutions.us.fujitsu.com/contact"
Have a question? Email us at: "AskFujitsu@us.fujitsu.com"
Copyright
©2014F
ujitsu America, Inc. All rights reserved.
B5FK-2321-01ENZ0
FUJITSU LIFEBOOK E734
FUJITSU LIFEBOOK E744
FUJITSU LIFEBOOK E754
Operating Manual
Fujitsu Contact Information 7
Notational conventions 8
Ports and controls 9
Important notes 14
First-time setup of your device 18
Working with the notebook 21
Security functions 53
Connecting external devices 59
Removing and installing components
during servicing 65
Settings in BIOS Setup Utility 73
Troubleshooting and tips 75
Technical data 82
Manufacturer’s notes 85
Index 90
Copyright and Trademark Information
Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness
of this document; however, as ongoing development efforts are continually improving the
capabilities of our products, we cannot guarantee the accuracy of the contents of this
document. We disclaim liability for errors, omissions, or future changes.
Fujitsu, the Fujitsu logo and LIFEBOOK are registered trademarks of Fujitsu Limited
or its subsidiaries in the United States and other countries.
Intel and Intel Core are trademarks or registered trademarks of Intel Corporation or
its subsidiaries in the United States and other countries.
Microsoft and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
The ExpressCard word mark and logo are owned by the Personal Computer
Memory Card International Association (PCMCIA) and any use of such marks by
Fujitsu America, Incorporated is under license.
Google is a trademark or registered trademark of Google Incorporated.
Bluetooth is a trademark of Bluetooth SIG, Inc., USA.
OmniPass is a trademark of Softex, Inc.
Roxio is a trademark of Roxio, a division of Sonic Solutions.
PowerDirector, PowerDVD, YouCam, and MakeDisc are trademarks of CyberLink Corp.
Adobe, Acrobat, and Adobe Reader are either a registered trademarks or trademarks of
Adobe Systems Incorporated in the United States and/or other countries.
Made under license from DTS Licensing Limited. DTS and the symbol are registered trademarks and
& DTS Boost is a trademark of DTS, Inc. Product contains software. © DTS, Inc. All rights reserved.
The DVD player found in some models of the LIFEBOOK notebook incorporates copyright
protection technology that is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and other rights users. Use
of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
All other trademarks specified here are the property of their respective owners.
Contents
Contents
FujitsuContact Information ............................................................ 7
Notationalconventions ................................................................ 8
Portsandcontrols ..................................................................... 9
Important notes ........................................................................ 14
Safetynotes ............................................................................ 14
Additional safety notes for devices with radio components . . . . . ............................. 15
Energysaving .......................................................................... 15
Energy saving under Windows ....................................................... 15
Travelling with your notebook ............................................................ 16
Before youtravel ................................................................... 16
Notebook: transporting ............................................................... 17
Cleaning the notebook .................................................................. 17
First-timesetup ofyour device ......................................................... 18
Unpacking and checking the device . . . ................................................... 18
Selecting alocation ..................................................................... 19
AC adapter connecting .................................................................. 19
Switching on the device for the firsttime .................................................. 20
Installing Bonus Apps . . . . . ........................................................... 20
Working with thenotebook ............................................................ 21
Status indicators ........................................................................ 21
Switchingont
he notebook . . . . ........................................................... 23
Notebook: switchingoff .................................................................. 23
Keyboard ............................................................................... 24
Virtual numerickeypad .............................................................. 26
Separate number block .............................................................. 27
Key combinations ................................................................... 27
Country and keyboardsettings ....................................................... 29
Application keys ........................................................................ 29
Touchpad andtouchpad buttons .......................................................... 30
Moving thepointer .................................................................. 30
Change mouse properties ............................................................ 30
Selectinganitem .................................................................... 30
Executing commands . . . . . ........................................................... 31
Draggingitems ...................................................................... 31
LCD screen ............................................................................ 31
Webcam ............................................................................... 32
Rechargeablebattery ................................................................... 33
Charging,caringforandmaintainingthe battery ....................................... 33
Removing andinstallingthe battery ................................................... 33
Modularbay devices .................................................................... 35
Removing a modular bay device . . . ................................................... 36
Installing a modular bay devices . . . ................................................... 36
Opticaldrive ............................................................................ 37
Handlingopticaldisks ............................................................... 37
CD/DVD indicator ................................................................... 37
Insertingor removinganoptical disk .................................................. 38
Manual removal (emergency removal) . . . . ............................................ 38
Fujitsu 3
Contents
Removing and installing the removeable dust filter ......................................... 39
Using the power-management features . . ................................................. 40
SD cards ............................................................................... 41
Supported formats .................................................................. 41
Inserting theSD card ................................................................ 41
Removing the SDcard ............................................................... 41
Speakers and microphones . . ............................................................ 42
SIM card ............................................................................... 42
Inserting theSIM card ............................................................... 43
Removing the SIMcard .............................................................. 44
Wireless LAN/Bluetooth/UMTS/LTE radio components . . . .................................. 45
Switching the wireless components on and off ......................................... 45
4G Activationfor VZWand AT&T ..................................................... 46
Furtherinformation on WLANand Bluetooth ........................................... 46
Accessvia WirelessWAN ............................................................ 46
Ethernet andLAN ....................................................................... 47
Your Port Replicator (optional) . . . ........................................................ 48
PortsonthePort Replicator .......................................................... 48
Connecting the notebook to the Port Replicator . . . . . .................................. 50
Connecting the AC adapter to the Port Replicator . . . .................................. 51
Switching on the notebook via the port replicator . . . . . .................................. 51
Disconnecting the notebook from the Port Replicator .................................. 52
Security functions ..................................................................... 53
Configuring the fingerprint sensor ........................................................ 53
Usingthe SecurityLock ................................................................. 54
Configuringpasswordprotectionin BIOSSetup Utility ...................................... 54
Protecting BIOS Setup Utility (supervisor and user HDD password) . . . ................... 55
Password protection for booting of the operating system . .............................. 56
Trusted Platform Module (TPM) (device-dependent) . . . . . .................................. 57
Enabling TPM ....................................................................... 57
Disabling TPM ...................................................................... 57
SmartCard reader ....................................................................... 58
Inserting theSmartCard ............................................................. 58
Connecting externaldevices ........................................................... 59
Connecting an external monitor . . ........................................................ 60
HDMI port .............................................................................. 61
Connecting USB devices ................................................................ 62
USB portwithcharging function (AnytimeUSB charge) ................................. 63
How toremove USBdevicescorrectly ................................................ 63
Connecting external audio devices . . . . . . ................................................. 64
Microphone port/Line In . . ............................................................ 64
Headphone port . . . . . ................................................................ 64
Removing and installing components during servicing . . . .............................. 65
Notes on installing and removing boards and components .................................. 65
Preparing to remove components ........................................................ 66
Removing and installing the memory expansion . . ......................................... 66
Removing the cover ................................................................. 67
Removing memory modules . . ........................................................ 67
Installingamemorymodule .......................................................... 68
Attaching the cover .................................................................. 68
Removing and installingtheharddisk .................................................... 69
4Fujitsu
Contents
Removing thecover ................................................................. 69
Removing thehard disk .............................................................. 70
Installingthehard disk ............................................................... 71
Attaching the cover .................................................................. 72
Finishing component removal . ........................................................... 72
Settings in BIOS Setup Utility . . . ....................................................... 73
Starting theBIOS Setup Utility ........................................................... 73
Operating BIOSSetupUtility ............................................................. 73
Exiting BIOSSetup Utility ................................................................ 74
Exit Saving Changes – save changes and exit BIOS Setup Utility . . ..................... 74
Exit Discarding Changes – Discard changes and exit BIOS Setup Utility . . . .............. 74
Load Setup Defaults – Copy Standard Entries . ........................................ 74
Discard Changes – Discard changes without exiting the BIOS Setup Utility . .............. 74
Save Changes – save changes without exiting the BIOS Setup Utility . . . . . .............. 74
Save Changes and Power Off ....................................................... 74
Troubleshootingand tips .............................................................. 75
Help ifproblems occur ................................................................... 75
Recovering yourFactory Image .......................................................... 75
The notebook’s date or time is incorrect ................................................... 76
When certaincharacters areentered on thekeyboard,only numeralsare written ............. 76
The notebook’s LCD screen remains blank . . . . ............................................ 76
The LCD screen is difficultto read ........................................................ 76
The externalmonitorremains blank ...................................................... 77
The externalmonitoris blank orthe imageis unstable ..................................... 77
The notebook cannot be started . . . ....................................................... 78
The notebook stops working . . ........................................................... 78
The printer does not print . . . . . ........................................................... 78
The radio connection to a network does not work . . ........................................ 79
Acoustic warnings ....................................................................... 79
SmartCard reader is not recognized . . . ................................................... 79
SmartCard PINforgotten ................................................................ 79
SmartCard lost ......................................................................... 79
Errormessageson thescreen ........................................................... 80
Technical data ......................................................................... 82
LIFEBOOK ............................................................................. 83
Rechargeablebattery ................................................................... 84
AC adapter (3 pin, 60 W and 90 W) . . . ................................................... 84
Manufacturer’snotes .................................................................. 85
Disposal andrecycling .................................................................. 85
Recycling your battery ............................................................... 85
Declarationsof Conformity ............................................................... 85
Regulatory notices ...................................................................... 86
FCC Notices ........................................................................ 86
DOC (IndustryCANADA)notice ...................................................... 87
ENERGY STAR Compliance ............................................................. 89
Index .................................................................................. 90
Fujitsu 5
Contents
6Fujitsu
Fujitsu Contact Information
Fujitsu Contact Information
Service and Support
You can contact Fujitsu Service and Support in the following ways:
• Toll free: 1-800-Fujitsu (1-800-838-5487)
• Website: "http://solutions.us.fujitsu.com/www/content/support/contact/index.php"
Before you place the call, you should have the following information ready so that the
customer support representative can provide you with the fastest possible solution:
• Product name
• Product configuration number
• Product serial number
• Purchase date
• Conditions under which the problem occurred
• Any error messages that have occurred
• Type of device connected, if any
Fujitsu Shopping Online
Please go to "http://www.shopfujitsu.com/store/ ".
Maintaining Latest Configuration
To ensure that you always have the most current driver updates related to your system, you
should occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM
utility is available from the Fujitsu Support site. FSDM will allow you to view a list of the most
current drivers, utilities, and applications to determine whether you have the latest versions. If you
have a Windows 7 operating system, you will need to go to the Support Site to download the
FSDM Utility: "http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS".
Limited Warranty
Your LIFEBOOK notebook is backed by a Fujitsu International Limited Warranty. Check the service
kit that came with your notebook for the Limited Warranty period and terms and conditions.
Fujitsu 7
Notational conventions
Notational conventions
Pay particular attention to text marked with this symbol. Failure to observe
these warnings could pose a risk to health, damage the device or lead
to loss of data. The warranty will be invalidated if the device becomes
defective through failure to observe these warnings.
Indicates important information for the proper use of the device.
►Indicates an activity that must be performed
Indicates a result
This font indicates data entered using the keyboard in a program dialogue or at
the command line, e.g. your password (Name123) or a command used to
start a program (start.exe)
This font indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
This font Indicates
• terms and texts used in a software interface, e.g.: Click on Save
• names of programsorfiles, e.g. Windows or setup.exe.
"This font" Indicates
• cross-references to another section, e.g. "Safety information"
• cross-references to an external source, e.g. a web address: For more
information, go to "http://solutions.us.fujitsu.com/"
• Names of CDs, DVDs and titles or designations for other materials,
e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual
Key indicates a key on the keyboard, e.g: F10
This font indicates terms and texts that are emphasized or highlighted, e.g.: Do
not switch off the device
8Fujitsu
Ports and controls
Ports and controls
This chapter presents the individual hardware components of your device. It gives
an overview of the indicators and ports of the device. Please familiarize yourself with
these components before you start to work with the device.
Front
LIFEBOOK E734:
9
1
3
1
6
5
7
8
10
6
2
5
4
1 = Microphone (optional)
2 = WebCam (optional)
3 = WebCam LED (optional)
4 = Touchpad
5 = Speakers
6 = Status indicators
7 = Wireless/Bluetooth and ECO on/off buttons
8 = Power ON/OFF button
9 = Fingerprint sensor (optional)
10 = Touchpad buttons
Fujitsu 9
Ports and controls
LIFEBOOK E744:
1
3
1
5
6
5
7
8
10
6
2
4
9
1 = Microphone (optional)
2 = WebCam (optional)
3 = WebCam LED (optional)
4 = Touchpad
5 = Speakers
6 = Status indicators
7 = Wireless/Bluetooth and ECO on/off buttons
8 = Power ON/OFF button
9 = Fingerprint sensor (optional)
10 = Touchpad buttons
10 Fujitsu
Ports and controls
LIFEBOOK E754:
1
3
1
5
6
5
7
8
10
6
2
4
9
1 = Microphone (optional)
2 = WebCam (optional)
3 = WebCam LED (optional)
4 = Touchpad
5 = Speakers
6 = Status indicators
7 = Wireless/Bluetooth and ECO on/off buttons
8 = Power ON/OFF button
9 = Fingerprint sensor (optional)
10 = Touchpad buttons
Left side
123 4 5 6 7 8
1 = DC input connector (DC IN)
2 = Ventilation slots
3 = LAN port
4 = External Monitor port (VGA)
5 = DisplayPort
6 = USB port 3.0
7 = SmartCard reader (optional)
8=SDCardslot
Fujitsu 11
Ports and controls
Right side
1 2 345 6
1 = Headphone port
2 = Microphone port
3 = USB port 3.0
4 = USB 3.0 port with charging function
(Anytime USB charge)
5 = Modular bay with optical drive or second
battery, second HDD or Weight Saver
(depending on configuration)
6 = Security Lock device
Rear
1 2
1 = USB port 2.0 (LIFEBOOK E744/E754 only) 2 = HDMI port (LIFEBOOK E754 only)
12 Fujitsu
Ports and controls
Bottom
2
2
4
5
3
1
6
7
1 = Modular bay release
2 = Battery Lock slider switch
3 = Port replicator port
4 = Rechargeable battery
5 = Removable dust filter
6 = Memory service compartment
7 = Hard disk service compartment
Fujitsu 13
Important notes
Important notes
ImportantnotesNotes
This chapter contains essential safety information which must be followed
when working with your notebook. Other notes also provide useful information
which will help you with your notebook.
Safety notes
SafetynotesNotes
Please follow the safety notes given below.
Please pay special attention to the sections in the manual marked
with the symbol on the left.
When connecting and disconnecting cables, observe the relevant
notes in this operating manual.
Read the information on the ambient conditions in the "Technical data",
Page 82 and "First-time setup of your device", Page 18 before preparing your
notebook for use and switching it on for the first time.
When cleaning the device, please observe the relevant notes in the
section "Cleaning the notebook", Page 17.
Pay attention to the additional safety notes for devices with radio components
provided in the "Safety/Regulations" manual.
Please refer to the notes in the chapter "Removing and installing
components during servicing", Page 65.
Handling the cord on this product will expose you to lead, a chemical known to the
state of California to cause birth defects or other reproductive harm.
Wash hads after handling.
This notebook complies with the relevant safety regulations for data processing
equipment. If you have questions about using your notebook in a particular area,
please contact your sales outlet or our Hotline/Service Desk.
14 Fujitsu
Important notes
Additional safety notes for devices with
radio components
Radiocomponent :WirelessLAN:Bluetooth,safetynotes
If a radio component (Wireless LAN, Bluetooth, UMTS) is integrated in your notebook, you
must be sure to observe the following safety notes when using your notebook:
• Switch off the radio components when you are in an aircraft or driving in a car.
• Switch off the radio components when you are in a hospital, an operating room or near a medical
electronics system. The transmitted radio waves can impair the operation of medical devices.
• Switch off the radio components when you let the device get near flammable
gases or into hazardous environments (e.g. petrol station, paintshops), as the
transmitted radio waves can cause an explosion or a fire.
For information on how to switch radio components on and off, see chapter
"Switching the wireless components on and off", Page 45.
Energy saving
NotesEnergyEnergysaving
Switch the notebook off when it is not in use. Switch off external, connected devices if you
are not using them. If you use the energy saving functions, the notebook uses less energy.
Youwillthenbea
ble to work for longer before having to recharge the battery.
Energy efficiency is increased and the environmental impact is reduced.
You save money while protecting the environment.
Energy saving under Windows
►Make use of the power management features (see "Using the power-management features",
Page 40).
Fujitsu 15
Important notes
Travelling with your notebook
MobileoperationNotesTra nspor tationNotebook
Please observe the points listed below when travelling with your notebook.
Before you travel
►Switch off the radio component for data security reasons. With data traffic via a wireless
connection, it is also possible for unauthorized third parties to receive data.
Information on activating data encryption is provided in the documentation
for your radio component.
►Be sure that you only operate the notebook on aircraft when attendant has
announced that it is safe to do so.
When travelling in other countries
►If you are travelling abroad, check that the AC adapter can be operated with the
local AC voltage. If this is not the case, obtain the appropriate AC adapter for
your notebook. Do not use any other voltage converter!
►Check whether the local AC voltage and the power cable are compatible. If this is not
the case, buy a power cable that matches the local conditions.
►Enquire with the corresponding government office of the country you will be travelling in as to
whether you may operate the radio component integrated in your notebook there).
►Take the necessary plug adapters if you’re traveling overseas. Check the following diagram
to determine which plug adapter you’ll need or ask your travel agent.
Outlet Type Location
United States, Canada, Mexico, parts of Latin
America, Japan, Korea, the Philippines, Taiwan
Russia and the Commonwealth of Independent
States (CIS), most of Europe, parts of Latin
America, the Middle East, parts of Africa, Hong
Kong, India, most of South Asia
United Kingdom, Ireland, Malaysia, Singapore,
parts of Africa
China, Australia, New Zealand
16 Fujitsu
Important notes
Notebook: transporting
Protect the notebook from severe shocks and extreme temperatures
(e.g. direct sunlight in a car).
►If your device has an optical drive, remove all data media (e.g. CD, DVD) from the drives.
TransportationNotebook
►Switch the notebook off.
►Unplug the AC adapter and all external devices from the power outlet.
►Disconnect the AC adapter cable and the data cables for all external devices.
►Close the LCD screen.
►To protect against damaging jolts and bumps, use a notebook carrying
case to transport your notebook.
Cleaning the notebook
Do not clean any interior parts yourself; leave this job to a service technician.
Only use cleaning products designed for computers. Normal household
cleaners and polishes can damage the markings on the keyboard and the
device, the paintwork or the notebook itself.
Ensure that no liquid enters the notebook.
The LCD screen very sensitive to scratches. Only clean the display
surface with a very soft, slightly damp cloth.
►Switch the notebook off.
CleaningNotesNotebookKeyboardTouchpadLCDscreenCrystalView display
►In order to prevent accidentially switching the device on, remove the power cable from the AC
adaptor and remove the battery (see "Removing and installing the battery", Page 33).
The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth which has
been moistened in mild domestic detergent and then carefully wrung out.
To clean the keyboard and the touchpad, if available, you can use disinfectant wipes.
Ensure that no liquid enters the device.
Fujitsu 17
First-time setup of your device
First-time setup of your device
First- timese tupGettingstarted
Please read the chapter "Important notes", Page 14.
If your device is equipped with a Windows operating system, the necessary
hardware drivers and supplied software are already pre-installed.
Beforeyouswitchonthedeviceforthefirst time, connect it to the AC voltage
using the AC adapter, see "AC adapter connecting", Page 19. The AC adapter
must be connected during the entire installation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
On delivery, the battery can be found in the battery compartment or in the accessories kit.
The battery must be charged if you want to operate your device using the battery.
When used on the move, the built-in battery provides the device with the necessary power. You
can increase the operating time by using the available energy-saving functions.
For instructions on how to connect external devices (e.g. mouse, printer) to your
device, please refer to the operating manual for your device.
Unpacking and checking the device
Should you discover any damage that occurred during transportation,
notify your local sales outlet immediately!
►Unpack all the individual parts.
PackagingTran sport
►Check your device for any visible damage which may have occurred during transportation.
You may need the packaging in the future, if you need to transport your device.
18 Fujitsu
First-time setup of your device
Selecting a location
SelectingalocationDeviceACadapter
Select a suitable location for the device before setting it up. Follow
the instructions below when doing so:
• Never place the device or the AC adapter on a heat-sensitive surface.
The surface could be damaged as a result.
• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air vents and cause overheating and damage.
• The underside of the device heats up during normal operation. Prolonged contact
with the skin may become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of the device may mark certain types of delicate surfaces.
• Keep other objects at least 100 mm away from the device and its
AC adapter to ensure adequate ventilation.
• Never cover the ventilation slots of the device.
• Do not expose the device to extreme environmental conditions. Protect
the device from dust, humidity, and heat.
AC adapter connecting
Preparingforo perationACadapter
Observe the safety notes in the enclosed "Safety/Regulations" manual.
The supplied power cable conforms to the requirements of the country in
which you purchased your device. Make sure that the power cable is approved
for use in the country in which you intend to use it.
3
12
►Connect the power cable (1) to
the AC adapter.
►Plug the AC cable (2) into a power outlet.
►Connect the AC adapter cable (3) to the
DC jack (DC IN) of the device.
Fujitsu 19
First-time setup of your device
Switching on the device for the first time
Switchingonforthefirstt ime
To make it easier to use your device for the first time, the operating system
is pre-installed on the hard disk.
►Switch on your device.
►During installation, follow the instructions on screen.
You can find information and help on the Windows operating system functions
on the Internet at "http://windows.microsoft.com".
Installing Bonus Apps
After you have started your system the first time, you will see a Bonus Apps icon on your desktop.
►Click on the icon to see which additional applications are available for you to install.
Applications that are already installed appear in grey, those that are
available for installation appear in blue.
►Select the applications you wish to install by selecting the checkbox adjacent to your selection.
or
►Click Select All if you would like to install all available applications
►To confirm your selection click Install.
Note that in some cases (depending upon which application was selected for
installation) after installation completes, the system will prompt you to reboot.
There are also cases in which if multiple applications are selected to install
but one of them needs a reboot, the system will reboot and continue
installing the rest of the selected applications.
20 Fujitsu
Working with the notebook
Working with the notebook
Notebook,operat ionNotebook
This chapter describes the basics for operating your notebook. Please read the chapter
entitled "Connecting external devices", Page 59 for instructions on how to connect
devices such as a mouse and a printer to the notebook.
Please refer to the notes in "Important notes", Page 14.
Status indicators
Statusindicators
The status indicators provide information about the status of the power supply,
the drives and the keyboard functions.
Key Description
Power-on indicator/Standby
StandbyindicatorPower-onindicator
• Indicator is illuminated: The notebook is switched on.
• Indicator flashes: The notebook is in standby mode.
• Indicator is off: The notebook is switched off.
Batteryindicator
• Indicator is illuminated (green): The battery is charged to between 50% and
100% of its maximum capacity.
• The indicator lights up orange: The battery is charged to between 13% and
49% of its maximum capacity.
•Thei
ndicator lights up red: The battery is charged to between 0% and 12% of
its maximum capacity.
• Indicator flashes red: An error has occured.
Fujitsu 21
Working with the notebook
Key Description
Battery charging indicator (Battery 1/Battery 2)/Power supply
The state of charge of the battery is shown by the battery indicator.
• Indicator is illuminated (green): The battery is charged or no battery has been
inserted.
• The indicator lights up orange: the AC adapter is connected and the battery
is being charged.
• Indicator flashes orange: the AC adapter is connected but the battery cannot be
charged as the battery is too hot or cold for charging. The charging process is
continued as soon as the battery reaches a permissible temperature again.
• Indicator flashes red: An error has occured.
• The indicator is not illuminated: the AC adapter is not connected.
Batterystatusindicator
BatterysymbolBatteryindicator
Drive indicator
DriveIndicator
Indicator is illuminated: One of the drives (e.g. hard disk, CD/DVD) is being
accessed.
Radio components indicator
• Indicator is illuminated: The wireless components are switched on.
• Indicator is off: The wireless components are switched off.
Num Lock indicator
IndicatorNumLock
Indicator is illuminated: The Num key has been pressed. The virtual numerical
keypad is activated. You can output the characters indicated on the upper right of
the keys.
Caps Lock indicator
IndicatorCapsLock
Indicator is illuminated: The Caps Lock key has been pressed. All the characters
you type will appear in upper case. In the case of overlay keys, the character
printedontheupper left of the key will appear when that key is pressed.
Scroll Lock indicator
IndicatorScrollLock
Indicator is illuminated: the key combination Fn +Scr has been pressed. The
effect that this key has varies between applications.
Energy saving functions indicator
• Indicator is illuminated: None of the energy saving functions have been
activated.
• The indicator is not illuminated: The energy saving functions have been
deactivated.
22 Fujitsu
Working with the notebook
Switching on the notebook
►Open the LCD screen.
Switchingon
►Press the Power ON/OFF button for about
one second to switch the notebook on.
The power-on indicator is lit.
Notebook: switching off
Back up your data and close all applications before you switch off your
device. Otherwise data might be lost.
►Shut down the operating system correctly.
Notebook
►If the notebook is not switched off
automatically, press the Power ON/OFF
button for approx. five seconds.
►Close the LCD screen.
Fujitsu 23
Working with the notebook
Keyboard
KeyboardNumerickeypadNumerickeypadButtons
The keyboard of your notebook is subject to continuous wear through normal
use. The key markings are especially prone to wear. The key markings are
liable to wear away over the life of the notebook.
The keyboard has been designed to provide all the functions of an enhanced keyboard.
Some enhanced keyboard functions are mapped with key combinations.
The following description of keys refers to Windows. Additional functions supported by the keys
are described in the relevant manuals supplied with your application programs.
The figure below shows how to access the different characters on keys with overlaid functions.
The example applies when the Caps Lock key has not been activated.
The illustrations shown below may differ from your actual device.
0
=
}
+
+
Num
Alt Gr
=
0}
=
0}
=
0}
=
0}
24 Fujitsu
Working with the notebook
Key Description
Backspace key
The Backspace key deletes the character to the left of the cursor.
BackspaceBac kspace
Tab key
The Tab key moves the cursor to the next tab stop.
Tabkey
Enter key (return)
The Enter key terminates a command line. The command you have entered
is executed when you pressthiskey.
EnterkeyReturnEnterLinefeed
Caps Lock
Caps Lock key
The Caps Lock key activates the Caps Lock mode, and the corresponding
icon is displayed in the Windows information area. In Caps Lock mode, all
of the characters you type appear in upper case. In the case of overlay
keys, the character printed on the upper left of the key will appear when
that key is pressed. To cancel the Caps Lock function, simply press the
Caps Lock key again.
ShiftkeyCapsLock
Shift key
The Shift key causes uppercase characters to appear. In the case of overlay
keys, the character printed on the upper left of the key appears when that
keyispressed.
ShiftkeyShift
Fn button
The Fn key enables the special functions indicated on overlay keys (see
"Key combinations", Page 27).
Fnkey
Cursor keys
The cursor keys move the cursor in the direction of the arrow, i.e. up, down,
left, or right.
CursorkeysCursorcontrolkeys
Windows key
The Windows key switches between the start screen and the last used
application.
Windowskey
Menu key
The Menu key opens the menu for the active application.
Fujitsu 25
Working with the notebook
Virtual numeric keypad
NumerickeypadVirtu alnum eric keypadNum Lock
LIFEBOOK E734 and LIFEBOOK E744 have virtual number keys, LIFEBOOK
E754 has a separate number keypad.
To provide the convenience of a numeric keypad, your keyboard is equipped with a virtual
numeric keypad. The special keys of the virtual numeric keypad are recognisable by the numbers
and symbols printed in the upper right corner of each key. If you have switched on the virtual
numeric keypad, you can output the characters shown on the upper right of the keys.
The keyboard layout shown below may differ from your actual device.
&
7
*
89
456
123
0
:
;+
<>?
//
789
456
123+
/
1 = Valid characters when the Num
key is not activated
2 = Valid characters when the Num
is activated
Further information about the status indicators can be found in chapter "Status indicators", Page 21.
26 Fujitsu
Working with the notebook
Separate number block
NumerickeypadSepa raten umer ickey padNumLock
LIFEBOOK E734 and LIFEBOOK E744 have virtual number blocks,
LIFEBOOK E754 has a separate number block.
The keyboard of your notebook has a separate number block on the far right.
Key combinations
Keycombinations
The following description of key combinations applies to Windows operating systems. Some of the
following key combinations may not function in other operating systems or with certain device drivers.
Other key combinations are described in the relevant manuals supplied
with your application programs.
Key combinations are entered as follows:
►Press the first key in the combination and keep it pressed.
►While holding the first key down, press the other key or keys in the combination.
Combination Description
Activate/deactivate keyboard backlight (optional)
On backlit keyboards, this key combination activates or deactivates
the backlight.
Fn+F2keyboar dbacklightkeyboardbacklight
Switching the speakers on and off
This key combination switches your notebook’s speakers off and
on.
Fn+F3
Speakers
Speakers
Fujitsu 27
Working with the notebook
Combination Description
Switching the touchpad and touchpad buttons on/off
This key combination switches the touchpad and the touchpad
buttons on or off.
Fn+F4TouchpadTouchpadbuttonsTouchpad
Decrease screen brightness
This key combination decreases the brightness of the screen.
Fn+F6LCD screenScreenbrightness
Increase screen brightness
This key combination increases the brightness of the screen.
Fn+F7Screen brightness
Decrease volume
This key combination reduces the volume of the internal speakers.
Fn+F8Vol ume
Increase volume
This key combination increases the volume of the internal
speakers.
Fn+F9Vol ume
Toggle output screen
Use this key combination to select which screen(s) is/are used for
display if an external monitor is connected.
Screen output is possible:
• only on the notebook’s LCD screen
• on the LCD screen of the notebook and the external monitor
at the same time
• only on the external monitor
This setting is useful if you would like a high resolution and a
high refresh rate on an external monitor.
Fn+F10Toggleou tputscreen
Switch between open applications
Use this key combination to switch between several open
applications.
Alt+Tab
AltCtrl Del
++
Windows security/Task-Manager
This key combination opens the Windows security/Task-Manager
window.
Ctrl+Alt+Del
Back tab
This key combination moves the cursor back to the previous tab
stop.
Shift+TabBacktab
Key combinations using the Windows keys are detailed in the manual
for your operating system.
28 Fujitsu
Working with the notebook
Country and keyboard settings
►Change the country and keyboard settings as described in the documentation for your operating
system.
Application keys
Applicationkeys
Your notebook is equipped with two application buttons.
Button Description
ECO button (E key)
The E key is a simple way of activating and deactivating power management functions
(e.g. reduce screen brightness), see "Using the power-management features", Page 40.
Wireless Components key
This application key is used to run a software utility which enables/disables WLAN,
Bluetooth and WWAN devices.
Fujitsu 29
Working with the notebook
Touchpad and touchpad buttons
Keep the touchpad clean. Protect it from dirt, liquids and grease.
TouchpadTouchpad
Do not use the touchpad if your fingers are dirty.
Do not rest heavy objects (e.g. books) on the touchpad or the touchpad buttons.
1
2
1 = Touchpad
2 = Touchpad buttons
The touchpad enables you to move the mouse pointer on the screen.
The touchpad buttons allow you to select and execute commands. They correspond
to the buttons on a conventional mouse.
You can use a key combination to disable the touchpad, to avoid accidentally moving
the pointer on the screen (see also "Key combinations", Page 27).
Moving the pointer
►Move your finger on the touchpad.
Touchpad
The pointer will move.
Change mouse properties
►To disable touchpad, press Fn +F4 key. This shortcut works on both
Windows 7 and Windows 8.1.
Selecting an item
►Move the pointer to the item you wish to select.
Touchpad
►Tap the touchpad once or press the left button once.
The item is selected.
Touchpad gestures are supported.
30 Fujitsu
Working with the notebook
Executing commands
►Move the pointer to the field you wish to select.
Touchpad
►Tap the touchpad twice or press the left button twice.
The command is executed.
Dragging items
►Select the desired item.
Touchpad
►Press and hold the left button and drag the item to the desired position
with the finger on the touchpad.
The item will be moved.
LCD screen
LCDscreenNotes
High-quality LCD displays are installed in notebooks from Fujitsu. For technical reasons, TFT
monitors are manufactured for a specific resolution. An optimal, clear picture can only be
ensured with the correct resolution intended for the relevant TFT monitor. A monitor resolution
which differs from the specification can result in an unclear picture.
The screen resolution of the LCD monitor of your notebook is optimally set at the factory.
Current production technology cannot guarantee an absolutely fault-free screen display. A few
isolated constantly lit or unlit pixels (picture elements) may be present. The maximum permitted
number of such faulty pixels is specified in the international standard ISO 9241-307 (Class II).
Example:
A screen with a resolution of 1280 x 800 has 1280 x 800 = 1024000 pixels. Each pixel consists of
three subpixels (red, green and blue), so there are almost 3 million subpixels in total. According to ISO
9241-307 (class II), a maximum of 2 light and 2 dark pixels and in addition 5 light or 10 dark subpixels
or an equivalent mix (1 light subpixel counts as 2 dark subpixels) are allowed to be defective.
Pixel A pixel consists of 3 subpixels, normally red, green and
blue. A pixel is the smallest element that can be generated
by complete functionality of the display.
Subpixel A subpixel is a separately addressable internal structure
within a pixel that enhances the pixel function.
Cluster A cluster contains two or more defective pixels or
subpixels in a 5 x 5 pixel block.
Background lighting
LCD monitors are operated with background lighting. The luminosity of the background
lighting can decrease during the period of use of the notebook. However, you can
set the brightness of your monitor individually.
Synchronising the display on the LCD screen and an external monitor
For more information, please refer to the chapter "Key combinations", Page 27
under "Display output, switch between".
Fujitsu 31
Working with the notebook
Webcam
Webcam
Depending on the device variant, a WebCam may be integrated in your notebook.
Depending on the software used, you can use your Webcam to take pictures,
record video clips or take part in web chats.
The WebCam has its own status indicator. The indicator lights up when the WebCam is switched on.
• The picture quality depends on the lighting conditions and the software being used.
• You can only operate the webcam with a particular application (e.g. an Internet telephony
program or a video conferencing program which supports a webcam).
• When using the webcam the notebook support must not wobble.
• The webcam automatically adjusts itself to the current light level. For this reason
the LCD screen may flicker while the light level is adjusted.
Further information on using the webcam and on the additional settings
which are possible for your webcam can be found in the help function
of the program which uses the webcam.
If you would like to perform a function test of your web cam, there is suitable test
software available at "http://www.fujitsu.com/fts/support/index.html".
32 Fujitsu
Working with the notebook
Rechargeable battery
RechargeablebatteryBatteryLife,batteryRechargeablebatteryRechargeablebattery
When not plugged into a power outlet, the notebook runs on its built-in battery. You
can increase the life of the battery by caring for the battery properly. The average
battery life is around 500 charge/discharge cycles.
You can extend the battery life by taking advantage of the available energy saving functions.
Charging, caring for and maintaining the battery
BatteryBattery
The notebook battery can only be charged, when the ambient temperature
is between 5°C and max. 35°C.
You can charge the battery by connecting the notebook to the AC adapter
(see "AC adapter connecting", Page 19).
If the battery is running low you will hear a warning alarm. If you do not connect the AC adapter
within five minutes of the warning alarm described above, your notebook will automatically switch off.
monitoring the battery charging level
BatteryBatterystatusmeter
Windows also has a "Battery status meter" in the taskbar for monitoring the battery capacity. When
you place the mouse pointer on the battery symbol, the system displays the battery status.
Battery storage
BatteryBatterySelf-discharge,batteryChargingcapacity,battery
Keep the battery pack between 32° F and 86° F/ 0°C and +30°C. The lower the temperature
at which the batteries are stored, the lower the rate of self-discharge.
If you will be storing batteries for a longer period (longer than two months),
the battery charge level should be approx. 30 %. To prevent exhaustive
discharge which would permanently damage the battery, check the level
of charge of the battery at regular intervals.
To be able to make use of the optimal charging capacity of the batteries, the battery
should be completely discharged and then fully recharged.
If you do not use the batteries for long periods, remove them from the
notebook. Never store the batteries in the device.
Removing and installing the battery
Only use rechargeable batteries approved by Fujitsu for your notebook.
Never use force when fitting or removing a battery.
Make sure that no foreign bodies get into the battery connections.
Never store a battery for longer periods in the discharged state. This
can make it impossible to recharge.
Fujitsu 33
Working with the notebook
Removing a battery
►Prepare for removal, see chapter "Preparing to remove components", Page 66.
3
1
2
►Slide the release button in the direction of the arrow (1).
►Slide the release button in the direction of the arrow (2) and hold it in place.
►Remove the battery from the battery compartment (3).
34 Fujitsu
Working with the notebook
Installing a battery
2
1
►Position the battery at the edge.
►Insert the battery into the battery compartment until it engages positively (1).
►Slide the release button in the direction of the arrow (2).
►Complete the removal, see chapter "Finishing component removal", Page 72.
Modular bay devices
Modularbay devicesModules
The design of your notebook enables the flexible use of notebook batteries and drives. The
following modular bay devices can be operated in the modular bay of your notebook:
• Second battery
• Second hard disk drive
•DVDRWdrive
•Blu-rayBD-Wdrive
• Weight Saver
• LIFEBOOK Bay Projector
Only use modular bay devices designed for your notebook.
Do not use force when installing or removing the modular bay devices.
Make sure that no foreign objects enter the modular bay.
You can swap modular bay devices during operation. This means you
do not need to switch off the notebook.
Log off the modular bay device via the corresponding symbol in the task bar.
The modular bay device can now be removed without any further actions being necessary.
Fujitsu 35
Working with the notebook
Removing a modular bay device
2
1
Modularbay deviceDriveWeightSaver
►Slide the modular bay release (1) in the direction of the arrow and hold.
►Pull the modular bay device (2) out of the modular bay.
Installing a modular bay devices
►Place the modular bay device into the modular bay so that the contacts enter first.
►Push the modular bay device into the modular bay until you feel it locking into place.
36 Fujitsu
Working with the notebook
Optical drive
Opticaldrive
This product contains a light emitting diode, classification according to IEC 60825
1:2007: LASER CLASS 1, and must therefore not be opened.
Handling optical disks
Handling
Observe the following guidelines when handling optical disks:
• Avoid touching the surface of a data carrier. Only handle data carriers by their edges.
• Always store data carriers in their cases. This will protect the data carrier against
being covered in dust, scratched or damaged in any other way.
• Protect your data carriers against dust, mechanical vibrations and direct sunlight.
• Avoid storing a data carrier in areas subject to high temperatures or humidity.
You may use both 3-in. / 8-cm and 4.7-in. / 12-cm disks in the optical drive.
When using an optical disk of lesser quality, vibrations and reading errors may occur.
CD/DVD indicator
CD/DVDindicator
The CD/DVD indicator flashes when an optical disk is inserted. The indicator goes out when
the drive is ready for reading. The indicator lights up when the drive is being accessed.
You may only remove the optical disk when the indicator is unlit.
If the CD/DVD indicator does not go out after a data carrier has been inserted, but
instead continues to flash, this means that the drive cannot access the data carrier.
Either the data carrier is damaged or dirty or you are using a data
carrier that the drive cannot read.
Fujitsu 37
Working with the notebook
Inserting or removing an optical disk
InsertingRemoving
The notebook must be switched on.
2
1
►Push the insert/eject button (1).
The drive tray will open.
►Gently pull the drive tray (2) completely out.
►Place the optical disk in the drive tray with
the printed side facing upwards.
or
►Remove an optical disk that has
been inserted.
►Push in the drive tray until you
feel it lock into place.
Manual removal (emergency removal)
CD/DVD:ManualremovalofdatacarrierEmergencyrem ovalo fdata carrier
In the event of a power failure or damage to the drive, you can remove the optical disk manually.
1
2
►Switch your notebook off.
►Push a pen or a piece of wire (such as a
paperclip) firmly into the opening (1).
The drive tray is ejected. You can now pull
the drive tray (2) out of the drive.
38 Fujitsu
Working with the notebook
Removing and installing the removeable dust filter
In order to ensure optimum cooling of the components in your notebook, you
should periodically clean the dust filter of the heatsink.
This ensures optimum fan performance. You can achieve the best cleaning
results with a small hand-held vacuum cleaner.
If necessary, you can also use a dry brush to release dust from the ventilation slots.
Do not use any cleaning liquids! Ensure that no liquid enters the device.
To avoid overheating of the device, do not remove the dust filter
when the device is switched on.
►Prepare for removal, see chapter "Preparing to remove components", Page 66.
1
2
►Press and hold the lock of the dust filter
(1) and remove it from its slot (2).
►Clean the dust chamber.
1
►Insert the dust filter into the slot (1) at
an angle as shown, and ensure that
you feel it click into place.
►Complete the removal, see chapter
"Finishing component removal", Page 72.
Fujitsu 39
Working with the notebook
Using the power-management features
PowerPowerBattery
The notebook uses less power when the available power-management features are used. You
will then be able to work longer when using the battery before having to recharge it.
Power efficiency is increased and environmental pollution reduced. By
choosing the best power options, you can make significant savings and
at the same time help protect the environment.
When you close the LCD screen, depending on the setting in Windows, the
notebook automatically enters a power saving mode.
►Select the power management functions in your Control Panel.
►Select the Screen Saver in your Control Panel.
If you need further information about an option, you can get help with most
settings by pressing F1 to open the Microsoft Help.
When the notebook is in power-saving mode, the following must be remembered:
During power saving mode, open files are held in the main memory
orinaswapfile on the hard disk.
Never turn off your notebook while it is in a power saving mode. If the built-in battery is
nearly empty, close the open files and do not go into power saving mode.
If you do not intend to use your notebook for a long period of time:
►Exit power saving mode if necessary via the mouse or keyboard or by switching on the
notebook.
►Close all opened programs and completely shut down the notebook.
40 Fujitsu
Working with the notebook
SD cards
Slot
Your notebook is equipped with an integrated SD card reader.
Observe the manufacturer’s instructions when handling the memory cards.
Memorycard
Supported formats
Your notebook supports the following format:
• Secure Digital (SDTM card)
Inserting the SD card
►Carefully slide the memory card into the
slot. The label should be facing upward. Do
not apply excessive force, as otherwise the
delicate contact surfaces could be damaged.
Memorycard
Depending on the particular type
used, the memory card may protrude
slightly from the slot.
Removing the SD card
Memorycard
In order to protect your data, always follow the correct procedure for removing
the card (see the documentation for your operating system).
1
2
►On devices with card locking: Press
on the storage card (1).
Memorycard
The storage card is released and
can now be removed.
►Pull the storage card out of the slot (2).
Fujitsu 41
Working with the notebook
Speakers and microphones
MicrophoneSpeakersBass speaker ( subwo ofer)Volumeco ntro l
Information on the exact position of the speakers and microphone can be
found in "Ports and controls", Page 9.
Please refer to chapter "Key combinations", Page 27 for information on setting the volume
and also enabling/disabling the speakers using key combinations.
If you attach an external microphone, the built-in microphone is disabled.
When you connect headphones or external speakers, the built-in speakers are disabled.
Information on connecting headphones and a microphone can be found
in "Connecting external devices", Page 59.
SIM card
A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a mobile telephone or
notebook to enable access to a mobile radio network in conjunction with an installed UMTS module.
Follow the instructions supplied by the provider of the SIM card.
The SIM card slot is located in the battery compartment and can only
be accessed when the battery is removed.
If you have purchased a Wireless WAN card, refer to the Activation
Flyer which comes with the product.
42 Fujitsu
Working with the notebook
Inserting the SIM card
►Prepare for installation of the SIM card, see chapter "Preparing to remove components", Page 66.
►Remove the battery, see chapter "Removing a battery", Page 34.
►Insert the SIM card:
1
►Pull the SIM card holder out of the slot (1).
2
3
►Insert the SIM card (2) into the SIM card holder as shown in the diagram on the SIM card holder.
►Push the SIM card holder back into the slot (3).
►Install the battery again, see "Installing a battery", Page 35.
►Complete the installation, see chapter "Finishing component removal", Page 72.
Fujitsu 43
Working with the notebook
Removing the SIM card
►Prepare for removal of the SIM card, see chapter "Preparing to remove components", Page 66.
►Remove the battery, see chapter "Removing a battery", Page 34.
2
1
►Pull the SIM card holder out of the slot (1).
►Remove the SIM card from the SIM card holder (2).
3
►Push the SIM card holder back into the slot (3).
►Install the battery again, see "Installing a battery", Page 35.
►Complete the removal, see chapter "Finishing component removal", Page 72.
44 Fujitsu
Working with the notebook
Wireless LAN/Bluetooth/UMTS/LTE radio components
The installation of radio components not approved by Fujitsu will invalidate
the certifications issued for this device.
Switching the wireless components on and off
►Press the button to start the WirelessSelector.
The radio component indicator will be illuminated when one or more radio
components are switched on.
If you switch off the radio components, the wireless LAN antenna and the
Bluetooth and UMTS/LTE module will also be switched off.
You can enable and disable the installed radio components individually
using the WirelessSelector program.
Details on using Wireless LAN can be found in the online help system
included in the Wireless LAN software.
You can find more information on how to use Bluetooth on the CD you
received with your Bluetooth software.
You can obtain more information on UMTS/LTE from your service provider.
Fujitsu 45
Working with the notebook
4G Activation for VZW and AT&T
To activate 4G on your Verizon Wireless (VZW) or AT&T device, perform the following steps:
Follow the instructions supplied by the provider of the SIM card.
The SIM card slot is located in the battery compartment and can only
be accessed when the battery is removed.
►Obtain a UCCID (SIM card): Contact your carrier and request a 2FF/MiniSIM UCCID (SIM card).
• AT&T: Call 1-800-908-9403 or contact your account representative
• Verizon Wireless: Call 1-800-256-4646 or contact your account representative
►Insert the SIM card, see chapter "Inserting the SIM card", Page 43.
►Activate your wireless device:
Before using your wireless device, you need to contact your respective carriers to activate
Mobile Broadband service. You will need to have your Mobile Equipment Identifier
(MEID) number or IMEI (International Mobile Equipment Identity) readily available in
order to activate your account. To find your MEID or IMEI number:
a. Click on the AirCard Watcher icon on your desktop.
b. Click on the small Menu icon in the taskbar at the top of the AirCard
Watcher window (it’s the fourth from the right).
c. Select “About...”, then click Device in the left pane. The MEID and IMEI numbers will be
displayed in the right pane. The IMEI number can also be found on the label on the unit box.
►Contact your carrier to activate the account:
AT&T: Call 1-800-908-9403 or contact your account representative
Verizon Wireless: Call 1-800-256-4646 or contact your account representative
Further information on WLAN and Bluetooth
For further information about WLAN or Bluetooth, see "Appendix: Miscellaneous Information".
Access via Wireless WAN
You can purchase the accessories for Wireless WAN reception from your Fujitsu dealer.
If you have ordered a Wireless WAN module, your device will already
be prepared when you receive it.
You will find information on establishing the connection with the Wireless WAN
network in the documentation for the hardware you plan to use.
46 Fujitsu
Working with the notebook
Ethernet and LAN
EthernetLAN
The internal network module of your notebook supports Ethernet LAN. You can use it to
establish a connection to a local network (LAN = Local Area Network).
2
1
►Connect the network cable to the LAN
port of the notebook (1).
►Connect the network cable to your
network connection (2).
Your network administrator can help you to configure and use the LAN connections.
The network cable is not included in the delivery scope. This type of
cable can be obtained from a specialist dealer.
Fujitsu 47
Working with the notebook
Your Port Replicator (optional)
The Port Replicator is a device that helps you to quickly connect your notebook to
your peripheral devices, such as a monitor, printer etc.
The features offered by the Port Replicator include standard ports for
monitor, audio, mouse and keyboard.
You need only dock the notebook in order to work with your peripheral devices.
Ports on the Port Replicator
PortReplicatorPorts
11
1
2
3
4
6
7
89
12
10
5
1 = Security Lock device
2 = USB 3.0 ports
3 = ESata port
4 = LAN port
5 = DisplayPorts
6 = DVI-D monitor port
7 = VGA monitor port
8 = DC input connector (DC IN)
9 = Headphones and microphone port
10 = Power ON/OFF button
11 = Connector on the Port Replicator for
the docking port on the underside
of the notebook
12 = Unlocking lever
The DVI port and DisplayPort cannot be used at the same time.
Multi Monitoring
Up to three displays are supported: with the optional Port Replicator you can take multi-tasking to
the next level. With the ability of running three monitors you will have enough real-estate to cut
48 Fujitsu
Working with the notebook
from one document and paste to another and keep track of email without closind one app so you
can see another. This is the key to beingt efficient in today’s business environments.
Possible monitor combinations:
LIFEBOOK ports Port Replicator ports
LCD notebook
monitor DisplayPort DisplayPort DVI-D port VGA port
-XX --
-X-X-
-X--
X
XXX --
-XX -X
X-X--
--
X-X
Fujitsu 49
Working with the notebook
Connecting the notebook to the Port Replicator
If you connect the notebook to the Port Replicator during operation, problems can
occur. We recommend that you switch off the notebook beforehand.
The AC adapter must be connected to the Port Replicator when the
notebook is connected to the Port Replicator.
We recommend that the notebook is not operated with the LCD screen closed when
the notebook is connected to the Port Replicator. The resulting overheating can
cause reduced performance and increased activity of the integrated fan.
PortReplicator
►Switch the notebook off.
►Remove the AC plug for the AC adapter from the power outlet.
►Disconnect the AC adapter cable from the DC socket (DC IN) of the notebook.
1
►Position the notebook so that it is in line with the back edge of the Port Replicator.
►Place the notebook onto the Port Replicator (1) and ensure that it locks into place correctly.
50 Fujitsu
Working with the notebook
Connecting the AC adapter to the Port Replicator
3
12
►Connect the power cable to the
AC adapter (1).
►Plug the power cable into the power
outlet (2).
►Connect the AC adapter cable to the DC
jack (DC IN) of the Port Replicator (3).
Power Outlets will vary from country to country, see chapter "When
travelling in other countries ", Page 16.
When the notebook is connected to a Port Replicator, the operating system creates
a hardware profile for the "Docked" mode. In this profile, for example, the setting is
saved as to which monitor was last used for output. This profile will be loaded, as
soon as the notebook is connected to a Port Replicator of the same type.
Switching on the notebook via the port replicator
►Press the Power ON/OFF button on the port
replicator to switch the notebook on.
The power-on indicator of the Port
Replicator lights up.
Fujitsu 51
Working with the notebook
Disconnecting the notebook from the Port Replicator
Problems may occur if the notebook is removed from the Port Replicator during
operation. We recommend that the notebook is switched off or that the appropriate
undocking function provided by the operating system is executed.
►Switch the notebook off.
2
1
►Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch.
►Lift off the notebook (2).
52 Fujitsu
Security functions
Security functions
Securityfunctions
Your notebook has several security features that you can use to secure your
system from unauthorized access.
This chapter explains how to use each function, and what the benefits are.
Please remember that in some cases, for example, forgetting your password,
you may be locked out and unable to access your data. Therefore,
please note the following information:
• Make regular backups to external data carriers such as external hard
drives, CDs, DVDs or Blu-ray Discs.
• Some security functions need you to choose passwords. Make a note
of the passwords and keeptheminasafeplace.
If you forget your passwords you will need to contact the our Service
Desk. Deletion or resetting of passwords is not covered by your warranty
and a charge will be made for assistance.
Configuring the fingerprint sensor
Fingerprintsens orFingerprintsens or
Whether or not your device has a fingerprint sensor depends on the
device configuration you have ordered.
The fingerprint sensor can record an image of a fingerprint. With additional fingerprint
software, this image can be processed and used instead of a password.
1
►You must install the fingerprint software
in order to be able to use the
fingerprint sensor (1).
To install OmniPass on your system you must run the Bonus Apps tool as detailed
in the Starting section of this manual. Once Bonus Apps have been installed, you
may be prompted to restart you system. Once your system has rebooted you will be
able to use OmniPass. If you choose not to restart immediately after installation,
OmniPass will not be available for use until the next reboot.
For further information about the fingerprint sensor see "Appendix:
Miscellaneous Information".
Fujitsu 53
Security functions
Using the Security Lock
Your device comes with a Security Lock mechanism for the Kensington Lock Cable. You
can use the Kensington Lock Cable, a sturdy steel cable, to help protect your notebook
from theft. The Kensington Lock Cable is available as an accessory.
Fujitsu recommends the use of a combination lock.
K
►Fit the Kensington Lock Cable to the
mechanism on your notebook.
UsingtheKensingtonLockCable
Security LockMechanicalbackupAnti-theftpr otection
Attach another Kensington Lock Cable to your Port Replicator to protect
your Port Replicator from theft as well.
Configuring password protection in BIOS Setup Utility
Before using the various options for password protection in the BIOS Setup utility
to increase data security, please observe the following:
Makeanoteofthe passwords and keep them in a safe place. If you forget your
supervisor HDD password you will not be able to access your notebook. Passwords
are not covered by your warranty and a charge will be made for assistance.
Password prote ction
Your password can be up to eight characters long and contain letters and numbers.
No distinction is made between uppercase and lowercase.
54 Fujitsu
Security functions
Protecting BIOS Setup Utility (supervisor and
user HDD password)
If you have opened these operating instructions on the screen, we
recommend that you print them out. You cannot call the instructions onto
the screen while you are setting up the password.
BIOSSetupUtility
The supervisor HDD password and the user HDD password both prevent unauthorized
use of the BIOS-Setup-Utility. With the aid of the supervisor HDD password you can
access all of the functions of the BIOS-Setup-Utility, while the user HDD password will only
give you access to some of the functions. You can only set up a user HDD password
if a supervisor HDD password has already been assigned.
Please refer to section "Settings in BIOS Setup Utility", Page 73 for a description
of how to call up and operate the BIOS-Setup-Utility.
Setting supervisor and user HDD password
►Start the BIOS Setup Utility and go to the Security menu.
►Select the Set Supervisor Password field and press the Enter key.
With Enter new Password: you are asked to enter a password.
►Enter the password and press the Enter key.
Confirm new Password requires you to confirm the password.
►Enter the password again and press the Enter key.
Changes have been saved is a confirmation that the new password has been saved.
►To set the user HDD password, select Set User Password and proceed exactly
as when configuring the supervisor HDD password.
If you do not want to change any other settings, you can exit BIOS Setup Utility.
►In the Exit menu, select the option Save Changes & Exit.
►Select Yes and press the Enter key.
PasswordSupervisorHDD passwordUserHDDpassword
The notebook will be rebooted and the new password will come into effect. It will now be necessary
to first enter your supervisor or user HDD password in order to open the BIOS Setup Utility.
Please note that the user HDD password only provides access to a few of the BIOS settings.
Changing the supervisor or user HDD password
You can only change the supervisor HDD password when you have logged into the
BIOS Setup Utility with the supervisor HDD password.
PasswordSupervisorHDDp asswordUserHDDpassword
►Call the BIOS Setup Utility and go to the Security menu.
►When changing the password, proceed exactly as for password assignment.
Fujitsu 55
Security functions
Removing passwords
To remove a password (without setting a new password) perform the following steps:
PasswordSupervisorHDDp asswordUserHDDpassword
►Start the BIOS Setup Utility and go to the Security menu.
►Highlight the Set Supervisor Password or Set User Password field and press the Enter key.
You will be requested to enter the current password by the Enter Current Password prompt.
You will be requested to enter a new password by the Enter New Password prompt.
►Press the Enter key twice.
►In the Exit menu, select the option Save Changes & Exit.
►Select Yes and press the Enter key.
The notebook will now reboot with the password removed.
Removing the supervisor HDD password simultaneously deactivates the user HDD password.
Password protection for booting of the operating system
With the supervisor HDD password you have set in the BIOS Setup Utility
(see section "Setting supervisor and user HDD password", Page 55), you
can also prevent booting of the operating system.
Operating system
Activating system protection
►Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
►Select the Password on Boot option and press the Enter key.
►Select the desired option (Disabled,First Boot or Every Boot) and press the Enter key
►Select the Save Changes & Exit option under Exit.
The notebook will reboot. You will be prompted to enter your password
(the supervisor HDD password).
Deactivating system protection
►Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
►Select the Password on Boot option and press the Enter key.
►Select the Disabled option and press the Enter key.
If you do not want to change any other settings, you can exit BIOS Setup Utility.
►Select theSave Changes & Exit option under Exit.
The notebook will reboot. The system is no longer password-protected.
56 Fujitsu
Security functions
Trusted Platform Module (TPM) (device-dependent)
TPMTrustedPlatform Module
To use the TPM, you must activate the TPM in the BIOS Setup before the software
is installed. The condition for this is that you have assigned at least the supervisor
HDD password (see "Security functions", Page 53).
Enabling TPM
• Requirement: You have assigned a supervisor HDD password, see "Security functions", Page 53.
►Call up the BIOS Setup and select the Security menu.
►Mark the TPM (Security Chip) Setting field and press the Enter key.
►Select the “Security Chip” “Enabled” entry to activate the TPM.
Once you have activated the TPM through a reboot, the Clear Security Chip option appears.
With Clear Security Chip, you can delete the owner in the TPM, if the TPM has already
been used. With Enabled, all secret keys (e.g. SRK - Storage Root Keys, AIK -
Attestation Identity Keys etc.) generated by applications are deleted.
Please note that you will then no longer be able to access the data you have
encrypted with the keys based on that holder.
►Select the Exit Saving Changes option in the Exit menu.
►Press the Enter key and select Yes.
The notebook will restart, and TPM will be enabled after the reboot.
Disabling TPM
• Requirement: You have assigned a supervisor HDD password, see "Security functions", Page 53.
►Call up the BIOS Setup and select the Security menu.
►Mark the TPM (Security Chip) Setting field and press the Enter key.
►Select “Security Chip” “Disabled” to deactivate the TPM.
►From the Exit menu, choose the option Exit Saving Changes.
►Press the Enter key and select Yes.
Your notebook will now restart and TPM will be disabled.
Fujitsu 57
Security functions
SmartCard reader
Securityfunctions,Securityfunctions
Depending on the device configuration level, your notebook is equipped
with a SmartCard reader.
SmartCards are not supplied as standard equipment. You can use all SmartCards that comply with
the ISO standard 7816-1, -2 or -3. These SmartCards are available from various manufacturers.
With the appropriate software you can use your SmartCard as an alternative to password protection,
but also as a digital signature, for encrypting your e-mails or for home banking.
We recommend that you always use two SmartCards. Always keep one of the SmartCards
in a safe place if you are carrying the other SmartCard with you.
Inserting the SmartCard
Do not use force when inserting and removing the SmartCard.
Make sure that foreign objects do not fall into the SmartCard reader.
►Slide the SmartCard into the SmartCard
reader with the chip facing upwards (on
some variants it faces down) and to the front.
58 Fujitsu
Connecting external devices
Connecting external devices
Always refer to the safety information provided in "Important notes", Page 14 before
connecting or disconnecting any devices to or from your notebook.
Always read the documentation supplied with the device you wish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
Follow the steps below in order, when connecting or disconnecting
devices to your notebook:
With some devices such as USB devices, it is not necessary to switch off
the notebook and the device before connecting/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the external device.
Some of the external devices require special drivers (see the operating
system and external device documentation).
Connecting devices to the notebook
1. Turn off your notebook and all external devices.
2. Unplug your notebook and all devices from the power outlets.
3. Connect the cables for your external devices following the instructions.
4. Plug all power cables into the power outlets.
DevicesPer ipheraldevices
Disconnecting devices from the notebook
1. Turn off your notebook and all external devices.
2. Unplug your notebook and all devices from the power outlets.
3. Disconnect the cables for your external devices following the instructions.
DevicesPer ipheraldevices
Fujitsu 59
Connecting external devices
Connecting an external monitor
An analogue monitor is connected to the analogue VGA monitor port, a digital monitor
to the DisplayPort or to the DVI-D monitor port on the optional Port Replicator.
Monitor output is limited to a maximum of two monitors at any one time (see "Key
combinations", Page 27, section "Toggle output monitor").
MonitorVGA connec tionsock etMonitorportMonitorport
Digital DisplayPort Analogue VGA monitor port
Digital DVI-D monitor port (on the optional Port
Replicator)
►Switch off the notebook and the external monitor.
►Plug the data cable of the external monitor into the monitor port.
►First switch on the external monitor and then the notebook.
You can also switch between the external monitor and the LCD monitor of the
notebook, see chapter "Key combinations", Page 27.
You can display the same picture on the external monitor and the
notebook LCD monitor simultaneously.
If you wish to operate the monitor via a DVI port, use the optional Port
Replicator available for your notebook.
60 Fujitsu
Connecting external devices
HDMI port
HDMIport
Depending on the device variant, your device may include an integral
HDMI port (LIFEBOOK E754).
The HDMI port on your notebook can be used to connect an external amplifier,
LCD TV or a plasma TV with an HDMI connection.
►Connect the data cable to the
external device.
►Connect the data cable to the HDMI
port of the notebook.
Fujitsu 61
Connecting external devices
Connecting USB devices
USBports
On the USB ports, you can connect external devices that also have a USB port
(e.g. a DVD drive, a printer, a scanner or a modem).
USB devices are hot-pluggable. This means you can connect and disconnect
devices while your operating system is running.
USB 1.x has a maximum data transfer rate of 12 Mbit/s.
USB 2.0 has a data transfer rate of up to 480 Mbit/s.
USB 3.0 has a data transferrateofupto5Gbit/s.
Additional information can be found in the documentation for the USB devices.
►Connect the data cable to the
external device.
►Connect the data cable to a USB
port of the notebook.
Device drivers
USB devices will be automatically recognized and installed by your operating system.
62 Fujitsu
Connecting external devices
USB port with charging function (Anytime USB charge)
USBchargingfunction
It is recommended that the notebook be operated with the power supply connected
whenever the USB port with charging function is in use, as this function will drain
the battery more quickly if an external USB device is being charged.
The power supply unit must already be connected when the notebook is
switched off, as otherwise the USB charging function will be disabled and
the connected USB devices will not be charged.
Some USB devices (e.g. mobile telephones) require a driver in order to utilize the
USB charging function. In this case the USB charging function will not work when the
notebook is switched off, as no drivers are active when the notebook is switched off.
You can use this USB port to charge or supply power to a USB device (e.g. to charge a PDA
or a mobile phone or to connect a USB lamp), even if the notebook is switched off.
How to remove USB devices correctly
Always correctly remove the device according to the rules described below,
to ensure that none of your data is lost.
►Left click on the icon to safely remove hardware, located in the taskbar.
►Select the device which you want to shut down and remove.
►Press the Enter key.
Wait for the dialogue box which tells you that it is now safe to remove the device.
Fujitsu 63
Connecting external devices
Connecting external audio devices
Microphone port/Line In
Audiodevices, connectingAudioportsMicrophone, connecting
The microphone port/Line In allows you to connect an external microphone, a MiniDisc
player, MP3 player, CD player or a tape deck to your notebook.
►Connect the audio cable to the
external device.
►Connect the audio cable to the microphone
port/Line In of the notebook.
Headphone port
Connectingaudiodevices
AudioportsConnectingheadphones
You can connect headphones or external speakers to your notebook via the headphone port.
►Connect the audio cable to the
external device.
►Connect the audio cable to the headphone
port of the notebook.
The internal speakers are disabled.
If you purchase a cable from a retailer, please note the following information:
The headphone port on your notebook is a "3.5 mm jack socket".
If you want to connect headphones or a speaker you will need a "3.5 mm jack plug".
64 Fujitsu
Removing and installing components during servicing
Removing and installing components
during servicing
Only qualified technicians should repair your notebook. Unauthorized
opening or incorrect repair may greatly endanger the user (electric shock,
fire risk) and will invalidate your warranty.
Components
Serv icing
After consulting the Hotline/Service Desk, you may remove and install the
components described in this chapter yourself.
If you remove and install components without consulting the Hotline/Service
Desk, then the warranty of your notebook will be voided.
Notes on installing and removing boards
and components
• Switch the notebook off and pull the power plug out of the electrical outlet.
• Always remove the battery.
• Take care when you use the locking mechanisms on the battery and any other component.
• Never use sharp objects such as screwdrivers, scissors or knives as leverage to remove covers.
NotesBoardESD
Boards with electrostatic sensitive devices (ESD) are marked with the label
shown.
When handling boards fitted with ESDs, you must always observe the following
points:
• You must always discharge static build up (e.g. by touching a grounded
object) before working.
• The equipment and tools you use must be free of static charges.
• Remove the power plug from the AC supply before inserting or removing
boards containing ESDs.
• Always hold boards with ESDs by their edges.
• Never touch pins or conductors on boards fitted with ESDs.
Fujitsu 65
Removing and installing components during servicing
Preparing to remove components
If you are going to remove or change system components, prepare for the removal as follows:
Please observe the safety information in chapter "Important notes", Page 14.
Remove the power plug from the power outlet !
►Switch the device off.
The device must not be in energy-saving mode !
►Close the LCD screen.
►Remove all the cables from the device.
►Turn the device over and place it on a stable, flat and clean surface. If necessary, lay an
anti-slip cloth on this surface to prevent the device from being scratched.
►Remove the battery (see "Removing a battery", Page 34).
Removing and installing the memory expansion
MemorymoduleMainmemoryRemovingmemory
Systemexpansi on
Systemexpansi on
If you are asked by the Hotline/Service Desk to remove and install the memory
expansion yourself, proceed as follows:
Please observe the safety information in chapter "Important notes", Page 14.
When installing/removing memory modules, the battery must be removed from
the notebook and the notebook must not be connected to the power supply,
see "Preparing to remove components", Page 66.
Only use memory expansion modules that have been approved for your
notebook (see "Technical data", Page 82).
Never use force when installing or removing a memory extension.
Make sure that foreign objects do not fall into the memory extension compartment.
You must open the service compartment to remove or install a memory module. On some devices,
opening the compartment may expose other components. These components should be removed
and replaced only by authorized specialists. Therefore, be sure to observe the following:
Individual components can become very hot during operation. Therefore, we
recommend that you wait one hour after switching off the notebook before removing
or installing memory modules. Otherwise, there is a risk of suffering burns!
As some components are exposed that are sensitive to static electricity, please take
note of chapter "Notes on installing and removing boards and components", Page 65.
66 Fujitsu
Removing and installing components during servicing
Removing the cover
►Prepare for removal, see "Preparing to remove components", Page 66.
1
2
►Remove the screw (1).
Keep the screw in a safe place.
►Lift the cover off the notebook (2).
Removing memory modules
3
2
1
1
►Carefully push the two mounting
clips outwards (1).
MemoryexpansionMemorymodule
The memory module snaps upwards (2).
►Pull the memory module out of its slot
in the direction of the arrow (3).
Fujitsu 67
Removing and installing components during servicing
Installing a memory module
2
a
1
►Insert the memory module with the contacts
and the recess (a) facing the slot (1).
MemoryexpansionMemorymodule
►Carefully push the memory module
downwards until you feel it click
into place (2).
Attaching the cover
2
1
►Place the cover in the correct mounting position (1).
►Tighten the screw (2).
►Complete the installation, see "Finishing component removal", Page 72.
68 Fujitsu
Removing and installing components during servicing
Removing and installing the harddisk
Removing the cover
1
2
►Remove the screw (1).
Keep the screw in a safe place. If you are removing more than one component at
the same time, store the screws for the individual components separate from each
other. If you install the wrong screws, components may be damaged.
►Lift the cover off the notebook (2).
Fujitsu 69
Removing and installing components during servicing
Removing the hard disk
1
►To release the hard disk from the contacts,
pull it in the direction of the arrow (1).
2
►Remove the hard disk from the hard
disk compartment (2).
3
3
►Pull off the hard disk sheets (3).
70 Fujitsu
Removing and installing components during servicing
Installing the hard disk
1
1
►Attach the hard disk sheets to the
hard disk (1).
2
►Place the hard disk into the hard
disk compartment (2).
3
►Pull the hard disk in the direction of
the arrow (3) until the contacts of
the hard disk engage.
Fujitsu 71
Removing and installing components during servicing
Attaching the cover
2
1
►Place the cover in the correct mounting position (1).
►Tighten the screw (2).
Finishing component removal
After you have removed or changed the system components as you required, please
prepare your device for operation again as follows:
►Install the battery again (see "Installing a battery", Page 35).
►Turn the notebook the right way up again and place it on a flat surface.
►Reconnect the cables that you disconnected before.
72 Fujitsu
Settings in BIOS Setup Utility
Settings in BIOS Setup Utility
BIOSSetupUtilitySystemsettings,BIOSSetup UtilityConfiguration,BIOSS etupUtilitySetupSystem configurationHardwareconfiguration
The BIOS Setup Utility allows you to set the system functions and the hardware
configuration for the notebook.
When it is delivered, the notebook is set to factory default settings. You can
change these settings in BIOS Setup Utility. Any changes you make take effect as
soon as you save and exit the BIOS Setup Utility.
The BIOS Setup Utility program contains the following menus:
Info Displays information relating to the BIOS, processor and notebook
System Advanced system settings
Advanced Configuration of various hardware components, such as mouse, keyboard,
processor
Security Password settings and security functions
Boot Configuration of the start-up sequence
Exit Exits the BIOS Setup Utility
Starting the BIOS Setup Utility
►Reboot the device (switch off/on to reboot the operating system).
BIOSSetupUtility
The following or a similar display appears on the screen at start-up:
<F2> BIOS Setup <F12> Boot Menu
►Press the function key F2 .
►If a password has been assigned, enter the password and press the Enter key.
If you have forgotten the password, contact your system administrator
or contact our customer service centre.
The BIOS Setup Utility starts.
Operating BIOS Setup Utility
BIOSSetupUtility
Press the F1 key to display help on the operation of the BIOS Setup Utility. The description
of the individual settings is shown in the right-hand window of the BIOS Setup Utility.
With the F9 key you can load the default settings of the BIOS Setup Utility.
►Use the cursor keys ←or →to select the menu you wish to access to make changes.
The menu is displayed on the screen.
►Select the option you want to change with the cursor keys ↑or ↓.
►Press the Enter key.
►Press the ESC key to exit the selected menu.
►For future reference, make a note of the changes you have made (for example, in this manual).
Fujitsu 73
Settings in BIOS Setup Utility
Exiting BIOS Setup Utility
BIOSSetupUtility
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Changes – save changes and exit
BIOS Setup Utility
►To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes .
The notebook is rebooted and the new settings come into effect.
Exit Discarding Changes – Discard changes and
exit BIOS Setup Utility
►To discard the changes, select Exit Discarding Changes and Yes .
The settings in place when BIOS Setup Utility was called remain effective. BIOS
Setup Utility is terminated and the notebook is rebooted.
Load Setup Defaults – Copy Standard Entries
►To copy the standard entries for all menus of the BIOS Setup Utility,
choose Load Setup Defaults and Yes .
Discard Changes – Discard changes without exiting
the BIOS Setup Utility
►To discard the changes you have made, select Discard Changes and Yes.
The settings in place when BIOS Setup Utility was called remain effective.
You can now make additional settings in the BIOS Setup Utility.
►If you want to exitBIOS Setup Utilitywith these settings, select Exit Saving Changes and Yes .
Save Changes – save changes without exiting
the BIOS Setup Utility
►To save the changes, select Save Changes and Yes.
The changes are saved. You can now make additional settings in the BIOS Setup Utility.
►If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes.
Save Changes and Power Off
►To save the changes and switch off your device, select Save Changes and Power Off and Yes .
The changes are saved. Your device is shut down.
74 Fujitsu
Troubleshooting and tips
Troubleshooting and tips
TroubleshootingTipsFaultTroubleshooting
If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows:
►Make a note of the steps and the circumstances that led to the fault. Also
make a note of any error messages displayed.
►Switch the notebook off.
►Please contact the Hotline/Service Desk.
You can contact Fujitsu Service and Support in the following ways:
• Toll free: 1-800-Fujitsu (1-800-838-5487)
• Website: "http://solutions.us.fujitsu.com/www/content/support/contact/index.php"
Please have the following information ready when you call:
• The model name and serial number of the notebook. The serial number is
located on a sticker on the underside of the notebook.
• Notes of any messages that appear on the screen and information on acoustic signals.
• Any changes you have made to the hardware or software since
receiving the notebook.
• Any changes you have made to the BIOS Setup settings since receiving the notebook.
• Your system configuration and all peripheral devices connected to your system.
• Your sales contract.
Our notebooks have been designed primarily with mobile applications in mind.
This means that considerable effort has been made to optimize components and
equipment in terms of weight, space and energy requirements. Depending on the
particular configuration you have purchased, it is possible that functionality may be
slightly reduced compared to a desktop PC if you are running processor-intensive
gaming software, e.g. games with intensive 3D graphics. Updating your hardware with
drivers which have not been approved by Fujitsu may result in performance losses,
data losses or malfunction of the equipment. A list of approved drivers and current
BIOS versions can be downloaded from: "http://solutions.us.fujitsu.com"
Help if problems occur
Should you encounter a problem with your computer that you cannot resolve yourself:
►Note the ID number of your device. The ID number is found on the type rating
plate on the back or underside of the casing.
►For further clarification of the problem, contact the Fujitsu Service Desk. When you do
this, please have ready the ID number and serial number of your system.
Recovering your Factory Image
Harddisk:Operatingsystem,recoveringFactoryImage
In the event you need to restore your original Factory Image refer to the steps
in "Appendix: Miscellaneous Information".
Fujitsu 75
Troubleshooting and tips
The notebook’s date or time is incorrect
SummertimeTime,daylightsaving sTimenotcorrectTimeno tcorrectInco rre ct d ate /ti meDateisincorrectBufferbattery,load
Cause Troubleshooting
Time and date are incorrect. ►With the BIOS-Setup-Utility,you can set the
date and time in the main menu.
If the time and date are still set incorrectly after
switching on the notebook.
►Please contact your sales outlet or our
Hotline/Service Desk.
When certain characters are entered on the
keyboard, only numerals are written
Abeepsounds ever ys econd
Cause Troubleshooting
The virtual numeric keypad of your device is
activated, see "Virtual numeric keypad", Page 26
►Press the Num key.
The notebook’s LCD screen remains blank
LCDscreenLCDscreenistoodark
Cause Troubleshooting
Monitor is switched off. ►Pressakeyortouchthe touchpad.
External monitor or television set connected. ►Press the key combination to switch the
screen output, see "Key combinations",
Page 27.
The LCD screen is difficult to read
LCDscreenLCDscreen
Cause Troubleshooting
Reflected glare ►Turn the notebook or alter the tilt of the LCD
screen.
►Increase the brightness of the screen.
76 Fujitsu
Troubleshooting and tips
The external monitor remains blank
Monitor
Cause Troubleshooting
Monitor is switched off. ►Switch the external monitor on.
Power saving has been activated (monitor is
blank).
►Press any key to continue.
Brightness is set to dark. ►Adjust the brightness of the monitor.
Screen output is set to the notebook’s LCD
screen
►Press the key combination to switch the
screen output, see "Key combinations",
Page 27.
The external monitor’s power cable or data
cable is not connected properly.
►Switch off the external monitor and the
notebook.
►Check whether the power cable is plugged
properly into the external monitor and into
the poweroutlet.
►Check whether the data cable is properly
connected to the notebook and the external
monitor (if it is plugged in with a connector).
►Switch on the external monitor and the
notebook.
The external monitor is blank or the image is unstable
ScreenM onitor
Cause Troubleshooting
The wrong external monitor has been selected
or the wrong screen resolution has been set for
the application program.
►Terminate the application program in
Windows by pressing Alt +F4 .Ifthe
fault persists after closing the program, use
the key combination for switching the screen
output (see "Key combinations", Page 27)to
switch over to the notebook’s LCD screen.
Change the following setting:
►Set the screen resolution: Set the screen
resolution as described in the documentation
for your operating system.
►Select monitor: Select monitor 1 or 2 as
described in the documentation for your
operating system.
Fujitsu 77
Troubleshooting and tips
The notebook cannot be started
Notebook
Cause Troubleshooting
The battery is not installed correctly. ►Check whether the battery is installed
correctly in its compartment.
►Switch the notebook on.
The battery is dead. ►Charge the battery.
or
►Insert a charged battery.
or
►Connect the AC adapter to the notebook.
The power adapter is not connected correctly. ►Check whether the AC adapter is connected
correctly to the notebook.
►Switch the notebook on.
The notebook stops working
NotebookEnergysaving mode
Cause Troubleshooting
Notebook is in energy saving mode. ►Leave energy saving mode.
An application program has caused the
malfunction.
►Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).
The battery is dead. ►Charge the battery.
or
►Insert a charged battery.
or
►Connect the AC adapter to the notebook.
The printer does not print
Printerdoesnot print
Cause Troubleshooting
The printer is not switched on. ►Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).
The printer is not connected correctly. ►Check that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.
►Check that the data cable connecting
the notebook to the printer is properly
connected.
►Check whether the correct printer driver is
loaded (refer to the printer documentation).
78 Fujitsu
Troubleshooting and tips
The radio connection to a network does not work
Theradioconn ection to ane twork does not work
(Possible) Cause Troubleshooting
The wireless component is disabled. ►Switch the radio component on (see
"Switching the wireless components on and
off", Page 45).
The wireless component is enabled. Despite
this, the wireless connection to a network does
not work.
►Check whether the radio connection is
switched on via the software.
►Further information on using the radio
component can be found in the help files.
Acoustic warnings
Acousticerror messagesErrors
Cause Troubleshooting
A beep sounds every few seconds.
The battery is almost flat.
►Charge the battery.
SmartCard reader is not recognized
Cause Troubleshooting
Chip card inserted incorrectly. ►Make sure you have inserted your
SmartCard into the SmartCard reader with
the chip facing upwards.
►Check whether the SmartCard you are using
is supported. Your SmartCard must comply
with the ISO standard 7816-1, -2, -3 and -4.
SmartCard PIN forgotten
Cause Troubleshooting
PIN forgotten ►If you are working in a network, contact your
system administrator, who can unlock your
notebook with a Supervisor PIN.
SmartCard lost
Cause Troubleshooting
SmartCard lost ►If you are working in a network, contact your
system administrator, who can boot up your
notebook with a Supervisor SmartCard.
Fujitsu 79
Troubleshooting and tips
Error messages on the screen
Errormessages on thes creenErrormessage:
This section describes the error messages generated by the BIOS Setup. Error messages displayed
by the operating system or programs are described in the relevant documentation.
If the error message appears repeatedly, despite troubleshooting measures, please
contact the place of purchase or our customer service centre.
Error message/cause Resolution
CMOS battery bad
If the error message occurs repeatedly, the
buffer battery in the notebook is flat.
►Contact your sales outlet or our customer
service centre.
System CMOS checksum bad - default configuration
used
The system configuration information is
incorrect.
►Switch the notebook off.
►Switch the notebook on.
►Press the function key F2 to access the
BIOS Setup.
►In the BIOS Setup, select the Exit menu.
►Select the entry Load Setup Defaults.
►Select OK and press the Enter key.
Extended memory failed at offset: xxxx Failing Bits:
zzzz zzzz
When testing the extended memory an error has
resulted at the address xxxx.
►Check whether the additional memory
module has been inserted correctly.
Failure Fixed Disk n
The settings of the hard disk drive are incorrect.
►Start the BIOS Setup (Primary Master
submenu) and select the correct settings.
Keyboard controller error ►Switch the notebook off with the Power
ON/OFF button.
►Wait 3 - 5 seconds and switch on the
notebook again.
Keyboard error If you are using an external keyboard:
►Check the connection and reboot the
notebook.
nn Stuck key ►Make sure that no key is pressed.
Operating system not found ►Check in the BIOS Setup whether your hard
disk has been set correctly.
►Make sure that the operating system is
installed on the corresponding drive.
Press <F1> to resume, <F2> to SETUP
This error message appears if an error occurs
during the self-test before starting the operating
system.
►Press the F1 function key to start the
operating system.
►Press the function key F2 to access the
BIOS Setup.
80 Fujitsu
Troubleshooting and tips
Error message/cause Resolution
Previous boot incomplete - Default configuration
used Due to an error during the previous system
boot, default values were used for certain
settings. Check the settings in the BIOS Setup.
►Press the F1 function key when prompted
to do so.
Real time clock error ►Contact your sales outlet or our customer
service centre.
nnnnK Shadow RAM failed at offset: xxxx Failing
Bits: zzzz
►Contact your sales outlet or our customer
service centre.
System battery is dead - Replace and run SETUP ►Contact your sales outlet or our customer
service centre.
System cache error - Cache disabled ►Contact your sales outlet or our customer
service centre.
System timer error ►Contact your sales outlet or our customer
service centre.
Fujitsu 81
Technical data
LIFEBOOK
Technicaldata
LIFEBOOK E734 LIFEBOOK E744 LIFEBOOK E754
Ambient conditions
Operating
temperature
41°F – 95° F / 5 °C – 35 °C
Temperature in transit 5° F – 140° F / 15 °C ... 60 °C
Dimensions
Width x depth x height 12.64 in. x 8.98 in. x
.078-1.06 in. /
321 mm x 228 mm x
20.57–26.92 mm
13.31 in. x 9.10 in. x
.078-1.06 in. /
338 mm x 231 mm x
20.57–26.92 mm
14.72 in. x 9.84 in. x
.078-1.06 in. /
374 mm x 250 mm x
20.57–26.92 mm
Weight
• with Weight Saver approx. 3.73 lbs. (1.69
kg)
approx. 3.95 lbs. (1.79
kg)
approx. 4.28 lbs. (1.94
kg)
• with Optical Drive approx. 3.95 lbs. (1.79
kg)
approx. 4.17 lbs. (1.89
kg)
approx. 4.50 lbs. (2.04
kg)
• with 2nd battery approx 4.17 lbs. (1.89
kg)
approx 4.39 lbs. (1.99
kg)
approx. 4.72 lbs. (2.14
kg)
Main memory
Slots 2 slots 204-pin DDR3L-1600 SO-DIMM with a total of max. 16 GB RAM
Approved memory
modules
2 GB, 4 GB or 8 GB DDR3L-1600 SO-DIMM
Display
Size 13.3 in. (33.8 cm) 14 in. (35.56 cm) 15.9 in. (39,9 cm)
Resolution 1,366 x 768 pixel,
300:1, 200 cd/m²
1600 x 900 pixel,
300:1, 250 cd/m²
LED backlight, (HD),
Anti-glare display,
magnesium
1,366 x 768 pixel,
300:1 , 200 cd/m²
Other LED backlight, (HD), Anti-glare display,
magnesium
IPS, (Full HD),
Anti-glare display,
magnesium
1,920 x 1,080 pixel,
300:1 , 300 cd/m²
The data sheet for the device provides further technical data. You will find the data
sheet on your device or on the Internet at "http://solutions.us.fujitsu.com".
Fujitsu 83
Technical data
Rechargeable battery
6-cell rechargeable
battery 1
6-cell rechargeable
battery 2
6-cell rechargeable
battery3(Bay
Battery module
compartment)
Rated voltage 10.8 V 10.8 V 10.8 V
Rated capacity 6700 mAh 5800 mAh 2600 mAh
Watt Hour ratings 72 Wh 63 Wh 28 Wh
ACadapter(3pin,60Wand90W)
Technicaldata
Electrical data
Rated voltage 100 V – 240 V (automatic)
Rated frequency 50 Hz – 60 Hz (automatic)
Secondary
Rated voltage 19 V
Max. rated current 3.42 A/4.22 A/5.27 A
An additional AC adapter or power cable can be ordered at any time from the online
Accessory store: "http://www.shopfujitsu.com/store/accstore.jsp".
84 Fujitsu
Manufacturer’s notes
Manufacturer’s notes
Disposal and recycling
Notes
You can find information on this subject on your notebook or on our website
("http://solutions.us.fujitsu.com/www/content/products/trade-in_program/").
Recycling your battery
Over time, the batteries that run your mobile computer will begin to hold a charge for a
shorter amount of time; this is a natural occurrence for all batteries. When this occurs,
you may want to replace the battery with a fresh one*. If you replace it, it is important
that you dispose of the old battery properly because batteries contain materials that
could cause environmental damage if disposed of improperly.
Fujitsu is very concerned with environmental protection, and has enlisted the services of the
Rechargeable Battery Recycling Corporation (RBRC)**, a nonprofit public service organization
dedicated to protecting our environment by recycling old batteries at no cost to you.
RBRC has drop-off points at tens of thousands of locations throughout the United States and
Canada. To find the location nearest you, go to "www.RBRC.org" or call 1-800-822-8837.
If there are no convenient RBRC locations near you, you can also go to the EIA Consumer
Education Initiative website "http://EIAE.org/ " and search for a convenient disposal location.
Remember – protecting the environment is a cooperative effort, and you should
make every effort to protect it for current and future generations.
* To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site
at "www.shopfujitsu.com" in the US or "www.fujitsu.ca/products/notebooks" in Canada.
** RBRC is an independent third party to which Fujitsu provides funding for
battery recycling; RBRC is in no way affiliated with Fujitsu.
Declarations of Conformity
Declaration of co n form i ty
This device complies with Part 15 of the FCC rules. Operations are subject to the following two
conditions: (1) This device may not cause harmful interference, (2) This device must accept any
interference received, including interference that may cause undesired operation.
Fujitsu 85
Manufacturer’s notes
Regulatory notices
FCC Notices
Regulatoryinform ation
NOTICE:
Changes or modifications not expressly approved by Fujitsu could void this
user’s authority to operate the equipment.
Notice to Users of Radios and Television
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet that is on a different circuit than the receiver.
• Consult the dealer or an experienced radio/TV technician for help.
86 Fujitsu
Manufacturer’s notes
DOC (Industry CANADA) notice
DOC(INDUSTRYCANADA)NOTICES
Radios and Television
This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment
Regulations.
CET appareil numérique de la class B respecte toutes les exigence du Réglement
sur le matérial brouilleur du Canada.
UL Notice
This unit requires an AC adapter to operate. Only use UL Listed I.T.E. adapters with an output rating
of 19 VDC, with a minimum current of 3.42 (65W). The correct output rating is indicated on the
AC adapter label. Refer to the illustration below for the correct AC Adapter output polarity:
When using your notebook equipment, basic safety precautions should always be followed to
reduce the risk of fire, electric shock and injury to persons, including the following:
• Do not use this product near water for example, near a bathtub, washbowl, kitchen
sink or laundry tub, in a wet basement or near a swimming pool.
• Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a
fire. They may explode. Check with local codes for possible special disposal instructions.
For Authorized Repair Technicians Only
CAUTION:
For continued protection against risk of fire, replace only with the
same type and rating fuse.
WARNING:
Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
FCC Regulatory information
Regulatoryinformation
Federal Communications Commission statement
This device complies with Part 15 of FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of this device.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy. If not installed and used in accordance with
the instructions, it may cause harmful interference to radio communications.
Fujitsu 87
Manufacturer’s notes
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the distance between the equipment and the receiver.
3. Connect the equipment to an outlet on a circuit different from the one the receiver is connected to.
4. Consult the dealer or an experienced radio/TV technician for help.
Please note the following regulatory information related to the optional radio device.
FCC Radio Frequency Exposure statement
This radio device has been evaluated under FCC Bulletin OET 65C and found compliant with the
requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF
Exposure from radio frequency devices. The radiated output power of this radio device is far below
the FCC radio frequency exposure limits. Nevertheless, this device shall be used in such a manner
that the potential for human contact during normal operation is minimized. When using this device, a
certain separation distance between antenna and nearby persons must be maintained to ensure RF
exposure compliance. In order to comply with RF exposure limits established in the ANSI C95.1
standards, the distance between the antennas and the user should not be less than 20 cm (8 inches).
Regulatory Notes and Statements
Radio device, health and authorisation for use
Radio-frequency electromagnetic energy is emitted from the wireless devices. The energy levels
of these emissions, however, are far much less than the electromagnetic energy emissions from
wireless devices such as mobile phones. Radio devices are safe for use by consumers because
they operate within the guidelines found in radio frequency safety standards and recommendations.
The use of the radio devices may be restricted in some situations or environments, such as:
• on board an airplane, or
• in an explosive environment, or
• in situations where the interference risk to other devices or services is
perceived or identified as harmful.
In cases in which the policy regarding use of radio devices in specific environments is not
clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain
authorization to use these devices prior to operating the equipment.
Regulatory Information/Disclaimers
Export restrictions
This product or software contains encryption code which may not be exported or
transferred from the US or Canada without an approved US Department of Commerce
export license. This device complies with Part 15 of FCC Rules, as well as ICES 003 B
/ NMB 003 B. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesirable operation.
Modifications not expressly authorized by Fujitsu may invalidate the user’s
right to operate this equipment.
88 Fujitsu
Manufacturer’s notes
ENERGY STAR Compliance
Your Fujitsu system is an ENERGY STAR qualified mobile PC. By
choosing a computer with the latest energy-saving technology, you’re
helping to preserve our environment for future generations. ENERGY
STAR is a joint program of the U.S. Environmental Protection Agency,
U.S. Department of Energy, Natural Resources Canada, and other
governments around the world helping us save money while protecting
the environment through energy efficient products and practices. With
energy costs and global warming top-of-mind for consumers, Fujitsu is
committed to offering solutions that help consumers conserve energy
and improve the quality of our environment.
Sleep Mode:
You will notice that your computer is initially set so that the display turns off after 15 minutes of
user inactivity, and the computer goes into Sleep mode after 20 minutes of user inactivity. When
going into Sleep mode, the computer also reduces the speed of any active Ethernet network
links. To “wake” the computer from Sleep mode, press the Suspend/Resume Button.
Energy saving benefits:
Fujitsu ENERGY STAR qualified mobile PCs use about half as much electricity as standard
equipment – saving half in utility costs. But more than that, ENERGY STAR also makes a difference
for the environment. Did you know that the average house can be responsible for twice the
greenhouse gas emissions as the average car? That’s because every time you flip on a light
switch, run your dishwasher, or turn on your PC, you use energy, which means more greenhouse
gas emissions from power plants. So the more energy we can save through energy efficiency,
the more we help to reduce greenhouse gases and the risks of global warming.
To learn more about the important ENERGY STAR program, visit:"www.energystar.gov".
To read about how Fujitsu is supporting Sustainable Management along with
several other environmental activities, visit the Fujitsu Corporate Citizenship page at:
"http://www.computers.us.fujitsu.com/www/content/aboutus/environmental/environment.php".
Fujitsu 89
Index
Index
A
A beep sounds every second 76
AC adapter
connecting 19
setting up 19
Acoustic error messages 79
Alt + Tab 28
Anti-theft protection 54
Application keys 29
Audio devices, connecting 64
Audio ports 64
B
Back tab 28
Backspace 25
Bass speaker (subwoofer) 42
Battery
battery life 33
caring for and maintaining 33
charge level 33, 40
charging 33
self-discharge 33
storage 33
Battery indicator 22
Battery status indicator
see Battery indicator 22
Battery status meter 33
Battery symbol
see Battery indicator 22
BIOS Setup Utility
calling 73
exiting 74
operating 73
protecting with password 55
settings 73
Bluetooth, safety notes 15
Board 65
Buffer battery, load 76
Buttons 24
C
Caps Lock 25
indicator 22
CD/DVD indicator 37
CD/DVD:
manual emergency removal 38
Charging capacity, battery 33
Cleaning 17
Components
installing / removing 65
Configuration, BIOS Setup Utility 73
Connecting audio devices 64
Connecting headphones 64
Crystal View display
cleaning 17
Ctrl+Alt+Del 28
Cursor control keys 25
Cursor keys 25
D
Date is incorrect 76
Declaration of conformity 85
Device
setting up 19
Devices
connecting 59
disconnecting 59
DOC (INDUSTRY CANADA) NOTICES 87
Drive
indicator 22
Removing 36
E
Emergency removal of data carrier 38
Energy
energy saving 15
Energy saving 15
Energy saving mode
leaving 78
Enter 25
Enter key 25
Error message:
on the screen 80
Error messages on the screen 80
Errors
Acoustic warnings 79
ESD 65
Ethernet LAN 47
F
Factory Image 75
Fault
correction 75
Fingerprint sensor 53
configure 53
First-time setup 18
Fn key 25
Fn+F10 28
Fn+F2 27
90 Fujitsu
Index
Fn+F3 27
Fn+F4 28
Fn+F6 28
Fn+F7 28
Fn+F8 28
Fn+F9 28
G
Getting started 18
H
Handling
data carriers 37
Hard disk:
restoring the contents 75
Hardware configuration 73
HDMI port 61
I
Important notes 14
Incorrect date/time 76
Indicator
Caps Lock 22
drive 22
Num Lock 22
Scroll Lock 22
Inserting
a data carrier 38
K
Key combinations 27
Keyboard 24
cleaning 17
keyboard backlight
Activate 27
Deactivate 27
L
LCD screen
cleaning 17
decrease brightness 28
difficult to read 76
notes 31
reflected glare 76
remains blank 76
LCD screen is too dark 76
Life, battery 33
Line feed 25
M
Main memory
see Adding memory 66
Manual removal of data carrier 38
Mechanical backup 54
Memory card
handling 41
inserting 41
removing 41
Memory expansion
installing 68
removing 67
Memory module
important notes 66
installing 68
removing 67
Microphone 42
Microphone, connecting 64
Mobile operation 16
Modular bay device
Removing 36
Modular bay devices 35
Modules 35
Monitor
connecting 60
drifting display 77
remains blank 77
Monitor port
see VGA connection socket 60
N
Notebook
cannot be started 78
cleaning 17
stops working 78
switching off 23
transporting 16–17
using 21
Notebook, operation 21
Notes 14
boards 65
cleaning 17
disposal / recycling 85
energy saving 15
LCD screen 31
Safety 14
transport 16
Num Lock
indicator 22, 26–27
Numeric keypad 24
see Separate numeric keypad 27
see Virtual numeric keypad 26
Fujitsu 91
Index
O
Operating system
activating system protection 56
cancel system protection 56
protecting with password 56
Operating system, recovering 75
Optical drive 37
P
Packaging 18
Password
changing 55
entering 55
removing 56
Password protection 54
Peripheral devices
connecting 59
disconnecting 59
Port Replicator
Connecting a notebook 50
Ports 48
Ports
Port Replicator 48
Power
power consumption 40
power-management features 40
Power-on indicator 21
Preparing for operation 19
Printer does not print 78
R
Radio component:
safety notes 15
Rechargeable battery 33
see Battery 33
Regulatory information
Notebooks with radio device 87
Notebooks without radio device 86
Removing
a data carrier 38
Removing memory
see Adding memory 66
Return 25
S
Safety notes 14
Screen
no screen display 77
Screen brightness
decrease 28
increase 28
Scroll Lock
indicator 22
Security functions 53
SystemLock 58
Security functions,
SmartCard 58
Security Lock 54
Selecting a location 19
Self-discharge, battery 33
Separate numeric keypad 27
Servicing 65
Setup
see BIOS Setup Utility 73
Shift 25
Shift + Tab 28
Shift key 25
Slot
Memory cards 41
Speakers 42
switch off 27
switch on 27
Standby indicator 21
Status indicators 21
Summer time 76
Supervisor HDD password
changing 55
entering 55
removing 56
Switching on
the notebook 23
Switchingonforthefirst time 20
System configuration 73
System expansion 66
see Adding memory 66
System settings, BIOS Setup Utility 73
T
Tab key 25
Technical data 82
AC adapter 84
notebook 83
The radio connection to a network does
not work 79
Time not correct 76
Time, daylight savings 76
Tips 75
Toggle output screen 28
92 Fujitsu
Index
Touchpad 28, 30
buttons 30
cleaning 17
dragging items 31
executing commands 31
moving the pointer 30
selecting an item 30
switch off 28
Touchpad buttons 28
TPM 57
Transport
Transport damage 18
Transportation 16–17
Troubleshooting 75
Trusted Platform Module 57
U
USB charging function 63
USB ports 62
User HDD password
changing 55
entering 55
removing 56
Using the Kensington Lock Cable 54
V
VGA connection socket 60
Virtual numeric keypad 26
Volume
decrease 28
increase 28
Volume control 42
W
Webcam 32
Weight Saver
Removing 36
Windows key 25
Wireless LAN:
safety notes 15
Fujitsu 93