Table of Contents
- FUJITSU Thin Client FUTRO S940
- Contents
- Your FUTRO...
- Ports and Operating Elements
- Important notes
- Getting started
- Operation
- System expansions
- Overview of optional system components
- Information about boards
- Opening the casing
- Adding memory
- Install and remove SmartCard reader (optional)
- Install and remove USB port
- Install and remove loudspeaker (optional)
- Installing and removing a Power over Ethernet module (optional)
- Install and remove board (optional)
- Install and remove power supply (PSU, Power Supply Unit) (optional)
- Replacing the lithium battery
- Closing the casing
- Technical data
- Index
Fujitsu S940 User Manual
Displayed below is the user manual for S940 by Fujitsu which is a product in the Thin Clients category. This manual has pages.
Related Manuals
Thin Client
Operating Manual
FUJITSU Thin Client FUTRO S940
Thank you for buying an innovative product from Fujitsu.
Latest information about our products, useful tips, updates etc. is available
on our website: "http://www.fujitsu.com/fts/"
You can find driver updates at: "http://support.ts.fujitsu.com/download"
Should you have any technical questions, please contact:
• our Hotline/Service Desk ("http://support.ts.fujitsu.com/contact/servicedesk")
• Your sales partner
• Your sales office
We hope you enjoy using your new Fujitsu system!
Remarks
Information on the product description meets the design specifications of Fujitsu and
is provided for comparison purposes. Several factors may cause the actual results to
differ. Technical data is subject to change without prior notification. Fujitsu rejects any
responsibility with regard to technical or editorial mistakes or omissions.
Trademarks
Fujitsu, the Fujitsu logo and FUTRO are registered trademarks of Fujitsu Limited
or its subsidiaries in the USA and other countries.
Kensington and Microsaver are registered trademarks of ACCO Brands.
USB Type-C™ and USB-C™ are trademarks of the USB Implementers Forum
in the USA and other countries.
Microsoft and Windows are trademarks or registered trademarks of Microsoft
Corporation in the USA and/or other countries.
eLux® and Scout Enterprise Management Suite® are registered trade marks of Unicon Software
Entwicklungs- und Vertriebsgesellschaft mbH in the European Union and in the USA.
All other trademarks specified here are the property of their respective owners.
Copyright
No part of this publication may be copied, reproduced or translated without
the prior written consent of Fujitsu.
No part of this publication may be saved or transferred by any electronic means
without the written approval of Fujitsu.
Contents
Contents
YourFUTRO... ......................................................................... 5
Validityof the Reference Manual ......................................................... 5
Notational conventions .................................................................. 5
Ports and Operating Elements ......................................................... 6
Frontview .............................................................................. 6
Rearview .............................................................................. 7
Securityfunctions ....................................................................... 8
Property and data protection ......................................................... 8
SecurityLock device ................................................................ 8
Securing USB covers (optional) . . . ................................................... 9
Importantnotes ........................................................................ 11
Safetynotes ............................................................................ 11
Important notes for the preparation for use of your device using the Power-over-Ethernet
module ................................................................................. 12
Transportingthedevice .................................................................. 12
Cleaning thedevice ..................................................................... 12
Energy saving,disposaland recycling .................................................... 13
Getting started ......................................................................... 14
Setting up the device .................................................................... 14
Vertical operatingposition ............................................................ 14
Horizontal operatingposition ......................................................... 17
Connecting externaldevices ............................................................. 19
Ports on the device .................................................................. 19
Connecting a monitor ................................................................ 20
Connecting themouse ............................................................... 20
Connecting the keyboard . ........................................................... 20
Connecting externaldevicesto theserialinterface ..................................... 21
Connecting externaldevicesto theUSBports ......................................... 21
Connecting microphone, headphones, line-out and line-in devices . . ..................... 22
Connectingthe deviceto thenetwork (LAN) ............................................... 22
Connecting the mains adapter ........................................................... 22
Operation .............................................................................. 23
Switchthe deviceon .................................................................... 23
Operating systems and management (device-dependent) . . . . . ............................. 23
eLux® . ............................................................................. 23
Windows® 10IoTEnterprise ......................................................... 24
Scout Enterprise Management Suite® – The management solution for Thin Clients . ...... 25
Switching offthedevice ................................................................. 26
Activatingpower-savingmode ........................................................ 26
Open BIOSSetup ....................................................................... 26
PXE system boot . ...................................................................... 27
BIOSUpdate ........................................................................... 27
Makingsystemsettings .............................................................. 27
Executing a system update . . . ....................................................... 27
Systemexpansions .................................................................... 28
Overview of optional system components . . . . . ............................................ 29
Information about boards . . . . . ........................................................... 30
Fujitsu 3
Contents
Opening the casing . . ................................................................... 31
Addingmemory ......................................................................... 32
Installinga memorymodule .......................................................... 32
Removing memory modules . . ........................................................ 32
Install and remove SmartCard reader (optional) . . . ......................................... 33
Installing the SmartCard reader . . . . . . ................................................. 33
Removing the SmartCard reader . . . . ................................................. 36
Installand removeUSBport ............................................................. 37
InstallUSB port ..................................................................... 37
Remove USBport ................................................................... 38
Install and remove loudspeaker (optional) ................................................. 39
Installingthe loudspeaker ............................................................ 39
Removing theloudspeaker ........................................................... 41
Installing and removing a Power over Ethernet module (optional) . .......................... 42
Installing the Power over Ethernet module ............................................. 42
Removing the Power over Ethernet module . . . ......................................... 44
Install and remove board (optional) . . . . . . ................................................. 45
Installing the board . . ................................................................ 45
Removing the board . ................................................................ 47
Install and remove power supply (PSU, Power Supply Unit) (optional) . . . . ................... 48
Installpower supply ................................................................. 48
Remove powersupply ............................................................... 51
Replacing thelithium battery ............................................................. 54
Closingthe casing ...................................................................... 55
Technicaldata ........................................................................ 56
FUJITSU ThinClientFUTRO S940 ....................................................... 56
ACadapter ............................................................................. 57
Internal AC adapter . . . . . ................................................................ 57
Index .................................................................................. 58
4Fujitsu
Your FUTRO...
Your FUTRO...
... is a universal network client. The intelligent and flexible terminal is reliable and
easy to maintain, it does not need a fan nor a hard disk. It therefore runs very quietly.
The operating system is installed on a flash memory.
ValidityoftheReferenceManual
This Reference Manual is valid for the following system:
• FUJITSU Thin Client FUTRO S940
Notational conventions
Pay particular attention to text marked with this symbol. Failure to observe
these warnings could pose a risk to health, damage the device or lead
to loss of data. The warranty will be invalidated if the device becomes
defective through failure to observe these warnings.
Indicates important information for the proper use of the device.
►Indicates an activity that must be performed
Indicates a result
This font indicates data entered using the keyboard in a program dialogue or at
the command line, e.g. your password (Name123)oracommandusedto
start a program (start.exe)
This font indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
This font indicates
• terms and texts used in a software interface, e.g.: Click on Save
• names of programs or files, e.g. Windows or setup.exe.
"This font" indicates
• cross-references to another section, e.g. "Safety information"
• cross-references to an external source, e.g. a web address: For more
information, go to "http://www.fujitsu.com/fts"
•Name
s of CDs, DVDs and titles or designations for other materials,
e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual
Key indicates a key on the keyboard, e.g: F10
This font indicates terms and texts that are emphasised or highlighted, e.g.: Do
not switch off the device
Fujitsu 5
Ports and Operating Elements
Ports and Operating Elements
Ports
This chapter presents the individual hardware components of your device. This will provide
you with an overview of the ports and operating elements on the device. Please familiarise
yourself with these components before you start to work with the device.
Front view
OnswitchOffswitchPower-onindicatorSmartCardread erFlashmemoryaccessHeadphoneportAudiooutputMicrop hone portUSB
$
#
"
!
%
1 = SmartCard reader (optional)
2 = Indicator for SmartCard reader
3 = Flash memory or hard disk access
4 = ON/OFF switch
5 = Microphone jack
6 = USB 3.1 Gen1 ports (USB Type-A)
7 = Headphone port
6Fujitsu
Ports and Operating Elements
Rear view
LANsocketPS/2mouse portInstallationopeningPS/2keyboard portMonito rportSerialportUSBportsAudiooutputDCinputco nnectorAudio inputPCIslotPCIeslotSecurityLock
1
16
15
14
13
12
11
10
2
3
4
5
6
7
8
9
1 = Socket for Power over Ethernet
module (optional)
2 = Audio output (Line Out)
3 = PS/2 keyboard port
4 = USB 2.0 ports (USB Type-A)
5 = RJ45 socket (Local Area Network)
6 = USB 2.0 ports (USB Type-A)
7 = DisplayPort
8 = Serial port
9 = DC input jack (DC IN)
10 = Security Lock device
11 = Serial port
12 = DisplayPort
13 = USB 3.1 Gen1 port (USB Type-C)
with double screw security
14 = PS/2 mouse port
15 = Audio input (Line In)
16 = PCI/PCIe slot
Fujitsu 7
Ports and Operating Elements
Security functions
Property and data protection
Propertyprotectio nData protectionProtection,proper tyand dat a
Software functions and mechanical locking offer a broad range of functions for protecting your
device and your personal data from unauthorised access. You can also combine these functions.
Security Lock device
Using the Security Lock device and the Kensington Lock cable (steel cable, accessory) you can
protect your device against theft. Please consult the manual for your Security Lock.
Your device has a Security Lock device on the rear side.
If you are using the VESA sub-adapter, first connect the Kensington Lock Cable to the Security
Lock device and then mount your device on the VESA sub-adapter. You can find more
information in the manual for your FUJITSU FUTRO S monitor carrier.
When using the Security Lock device, opening of the casing is also prevented.
8Fujitsu
Ports and Operating Elements
Securing USB covers (optional)
To prevent use of the USB ports, you can attach optional USB covers to the USB
ports on the front and rear side of the device.
Please note that USB covers, once fitted, cannot be removed again!
Ensure that you fit the USB covers the right way round.
►Insert the USB covers in the USB ports on the front of the device and push the USB covers in firmly.
Fujitsu 9
Ports and Operating Elements
►Insert the USB covers in the USB ports on the rear side of the device
and push the USB covers in firmly.
In the BIOS Setup, under Advanced - USB Port Security, you can also deactivate
the USB ports, in order to limit the use of USB devices.
10 Fujitsu
Important notes
Important notes
ImportantnotesNotes
In this chapter you will find information regarding safety which it is essential to
take note of when working with your device.
Safety notes
SafetynotesNote
Please follow the safety notes provided in the "Safety/Regulations" manual
as well as the safety notes given below.
When installing and operating the device, please observe the notes on ambient
conditions in "Technical data ", Page 56 and the instructions in "Getting started", Page 14.
Replace the lithium battery on the mainboard exactly in accordance with the
instructions in the "Replacing the lithium battery", Page 54 chapter.
The device may only be operated up to a maximum height of 3000 m
(9842 ft) (for China only 2000 m (6557 ft)).
Caution, components in the system can get very hot.
The activities described in these instructions must always be
performed with the greatest care.
Repairs to the device must only be carried out by qualified technicians. Incorrect
repairs could put the user at great risk (electric shock, hazardous energy emissions,
risk of fire)orc
ause serious damage to the equipment.
Operate the device only with the casing closed.
Power cable and mains adapter:
The supplied power cable conforms to the requirements of the country in
which you purchased your device. Make sure that the power cable is approved
for use in the country in which you intend to use it.
The mains adapter’s power cable should only be connected to a mains
socket if the device is connected.
Do not use the mains adapter for other devices.
Use only the mains adapter which is intended for use with the device,
see chapter "Technical data ", Page 56.
Make sure that the rated current of the mains adapter is not higher than that of
the power system to which you connect the mains adapter.
ON/OFF switches do not disconnect the device from the mains voltage. To completely
disconnect the mains voltage, remove the power plug from the power socket.
Fujitsu 11
Important notes
Important notes for the preparation for use of your
device using the Power-over-Ethernet module
With the help of the Power-over-Ethernet module you can operate the device via the LAN without an
additional power supply. For this, you need to have an appropriate network infrastructure.
To operate the device using the Power-over-Ethernet module, end-span or midspan devices
as defined in IEEE 802.3at and shielded CAT-5 network cables or higher-quality cables with a
larger cross-section (AWG23 or smaller) and a maximum length of 75 m are required. End-span
devices will only be supported in connection with a hardware classification.
When operating the device using the Power-over-Ethernet module, due to the limited power
output, not all hardware expansion levels are possible. For this reason, the use of USB
port type C (S26361-F3465-E9) or of PCI-Express expansion cards is prohibited. If you
have any questions, please contact our support or sales outlet.
Depending on the system utilisation, occupancy of external interfaces (excluding the keyboard,
screen, microphone and headset) may cause overloading of the Power-over-Ethernet
module. In case of overheating or overload, the system can be shut down automatically
to prevent damage to the device or the network. In the event of switching off, the
assignment of the external interfaces must be checked or reduced.
If the system does not receive the required power according to standard 802.3 at (25.5 W), the
system stops in the post with an error message. In this case, check your midspan or end-span device.
Transporting the device
Device,Transp ortati on
Retransportation
Transport all parts separately in their original packaging or in a packaging which
protects them from knocks and jolts, to the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is brought from a cold environment into the room where it will be used,
condensation may occur. Before operating the device, wait until it is absolutely dry
and has reached approximately the same temperature as the installation site.
Cleaning the device
Device,Transp ortati onRetransportationSystemunit, see Devi ce
Turn off all power and equipment switches and disconnect the power
plug from the mains outlet.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic (alcohol, thinner or acetone).
Never clean the device with water! Water entering into the device could
present a serious risk to users (e.g. electric shock).
Ensure that no liquid enters the system.
The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been
moistened in mild domestic detergent and then carefully wrung out.
Use disinfectant wipes to clean the keyboard and the mouse.
12 Fujitsu
Important notes
Energy saving, disposal and recycling
DisposalEnergysavingRecy cling
You can find information on these subjects in chapter "Activating power-saving mode", Page 26,on
the Recovery DVD or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/").
The following sections apply to the FUJITSU Thin Client FUTRO only:
Information about the "Eco-design directive": Regulation 1275/2008, based on the EU Eco-design
Directive (2009/125/EU), defines requirements for the power consumption of electrical and
electronic domestic and office devices in stand-by and off mode.
In general, all FUTRO thin client products have been developed for energy-efficient operation and low
stand-by losses. Customer-specific requirements and requirements of the operating system, which
are a priority for optimal operation, can contradict the requirements of the above-mentioned regulation.
For administrative purposes, such as remote maintenance of systems, the "Wake-on-LAN"
(WoL) function is indispensable for our customers and is therefore a default setting. When the
WoL function is active, the maximum permissible power draw can be exceeded slightly in OFF
mode. By deactivating the WoL function, it is possible to comply with the legal requirements.
Please see chapter "Activating power-saving mode", Page 26 for the procedure.
The energy saving mode (ACPI S4 Save-to-disk), which is familiar from many current mobile
and desktop systems, is not available in the embedded operating systems for technical reasons.
Therefore, it is not possible to switch devices with this operating system automatically into Off mode.
The operating system of a thin client is stored on a flash memory with optimised size and is provided
with write protection after configuration has been completed by the customer. This prevents data
security from being put at risk through frequent writing to a flash memory, such as when updating
the swapfiles in the operating system or through other applications. Every flash memory permits
only a limited number of write cycles. Both the activated write protection and the available limited
flash memory capacity rule out the possibility of activating energy saving mode (ACPI S4).
Fujitsu 13
Getting started
Getting started
Gettingstarted
Please observe the safety information in the "Important notes", Page 11 chapter.
Setting up the device
In order to ensure that the casing is sufficiently ventilated and to prevent overheating,
the device must only be operated with the base foot attached.
If the device is to be built-in, adequate ventilation must be assured.
Fit the base feet for horizontal or vertical operation (see "Vertical operating
position", Page 14 and "Horizontal operating position", Page 17).
Vertical operating position
VerticaloperatingpositionOperatingposition, verticalBasefeetSidecover
If you wish to operate the device in the vertical operating position, use
the two feet supplied for vertical operation.
Only mount the feet on the device side shown in the diagrams.
If connecting many cables to the device, ensure that the device is in a stable
position, in order to prevent it from toppling over.
Proceed as follows to prepare the device for the vertical operating position:
►Disconnect the cables if required.
►Lay the device on its top (narrow side) as shown, on a stable, flat and clean surface.
14 Fujitsu
Getting started
3
3
3
3
1
2
1
►Place the feet on the casing (1). In doing so, make sure that the 4 clips (2) on the
feet are aligned above the corresponding holes in the casing.
►To secure the feet, press the clips in the direction of the arrow (2) until
they are felt to engage in the holes.
To protect your device against unauthorised removal of the feet, the feet
can also be secured with two screws each, of type M2.5x5 mm. These
are not included in the delivery scope.
►Secure the feet with the screws (3).
Fujitsu 15
Getting started
►Stand the device on the feet.
►If necessary, reconnect any cables that were previously disconnected.
16 Fujitsu
Getting started
Horizontal operating position
If you wish to operate the device in the horizontal operating position, use
the two feet supplied for horizontal operation.
Only mount the feet on the device side shown in the diagrams.
Proceed as follows to prepare the device for the horizontal operating position:
HorizontaloperatingpositionOperatingposition, horizontalBasefeet
►Disconnect the cables if required.
►Laythedeviceonitsrightside as shown, on a stable, flat and clean surface.
2
1
1
3
3
3
3
►Place the feet on the casing (1). In doing so, make sure that the 4 clips (2) on the
feet are aligned above the corresponding holes in the casing.
►To secure the feet, press the clips in the direction of the arrow (2) until
they are felt to engage in the holes.
Fujitsu 17
Getting started
To protect your device against unauthorised removal of the feet, the feet
can also be secured with two screws each, of type M2.5x5 mm. These
are not included in the delivery scope.
►Secure the feet with the screws (3).
►Stand the device on the feet.
►If necessary, reconnect any cables that were previously disconnected.
18 Fujitsu
Getting started
Connecting external devices
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not connect or disconnect cables during a thunderstorm.
Always hold the plug of a cable when removing it. Never unplug a
cable by pulling the cable itself.
To ensure that your device works properly, use only the connection cable
supplied or use a high-quality connection cable.
Ports on the device
PortsExternaldevicesDevice
The ports are located on the front and rear side of the device. The ports available on
your device depend on the configuration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the manual for the mainboard.
Headphone port, black (front
of device)
Headphones
Microphone port, black (front of device)
Microphoneport
Audio output (Line Out), light
green
AudiooutputLineout
Audio input (Line In), light blue
AudioinputLinein
Serial port, turquoise
Serialport
RJ45-LAN port
LANport
USB 2.0 - Universal Serial
Bus, type-A, black
USB 3.1 Gen1 - Universal Serial Bus,
type-A: blue, type-C: black
UniversalSerialBus
DP DisplayPort
DisplayPort
PS/2 mouse port, green
MouseportPS/2mouse port
PS/2 keyboard port, purple
Keyboardport
Some of the connected devices require special software (e.g. drivers) (refer to the
documentation for the connected device and operating system).
Fujitsu 19
Getting started
Connecting a monitor
Only attach the screen to your device when it is switched off.
►Follow the instructions contained in the monitor manual to prepare the monitor
for operation (e.g. connecting cables).
Monitor,
►Connect the data cable to the required monitor port on your device.
►Plug the monitor power cable into the grounded mains outlet.
Connecting the mouse
You can connect a USB mouse or a PS/2 mouse to your device.
Mouse,Connecting,
Connecting a USB mouse
►Connect the USB mouse to one of the USB ports on the device.
USBport,USBport
Connecting a PS/2 mouse
The PS/2 mouse is only detected by the device if you connect the mouse when
the device is switched off and then switch the device on again.
►Connect the PS/2 mouse to the PS/2 mouse port of the device.
PS/2mouse,Con necting,PS/2mouse,
►Switch your device on again.
Connecting the keyboard
You can connect a USB keyboard or a PS/2 keyboard to your device.
Keyboard,Connecting,
Connecting a USB keyboard
Use the supplied keyboard cable only.
USBport,Connecting,
►Plug the flat rectangular USB connector of the keyboard cable into a USB port of the device.
USBport
Connecting a PS/2 keyboard
Use the supplied keyboard cable only.
ConnectingaP S/2keyboardConnecting,
The PS/2 keyboard is only detected by the device if you connect the keyboard
when the device is switched off and then switch the device on again.
►Switch your device off.
►Plug the round plug of the keyboard cable into a keyboard port of the device.
Keyboard,
►Switch your device on again.
20 Fujitsu
Getting started
Connecting external devices to the serial interface
SerialinterfaceSerialinterface,Externaldevices,Devices,
For an exact description of how to connect external devices to the corresponding
port, please see the external device documentation.
External devices (e.g. a printer or scanner ) can be connected to the serial port.
►Connect the data cable to the external device.
►Connect the data cable to the corresponding serial interface.
Port settings
Serialinterface,
You can change the settings of the port in the BIOS Setup.
Device drivers
Devicedrive rs,
The devices connected to the serial interface require drivers. Your operating system
already includes many drivers. If the required drive is missing, install it. The latest
drivers are usually available on the Internet or will be supplied on a data carrier.
Connecting external devices to the USB ports
USBdevices,USBport,Externaldevices,D evices,
You can connect a wide range of external devices to the USB ports (e.g.
printer, scanner, mouse or keyboard).
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in the documentation for the USB devices.
►Connect the data cable to the external device.
►Connect the data cable to one of the USB ports on your device.
Device drivers
External USB devices which you connect to one of the USB ports don’t usually
need their own drivers because the software required is already included in
the operating system. If the device requires separate software, please follow
the instructions in the manufacturer’s documentation.
Fujitsu 21
Getting started
Connecting microphone, headphones, line-out
and line-in devices
MicrophoneHeadphonesLine-outdev ices
►Connect the microphone to the microphone port.
►Connect the headphones to the headphones port.
►Connect line-out devices to the audio output.
►Connect the external line-in devices to the audio input.
Connecting the device to the network (LAN)
LAN
►Connect the 10/100/1000 Base T network cable to the RJ45 LAN port.
Connecting the mains adapter
Preparingforo perationPowercable
Observe the safety notes in the enclosed "Safety/Regulations" manual.
The supplied power cable conforms to the requirements of the country in
which you purchased your device. Make sure that the power cable is approved
for use in the country in which you intend to use it.
2
1
3
►Connect the mains cable (1) to the
mains adapter.
►Connect the mains adapter cable (2) to
the DC jack (DC IN) of the device.
►Plug the mains cable (3) into a mains socket.
22 Fujitsu
Operation
Operation
Switch the device on
►If necessary, switch the monitor on (see the operating manual for the monitor).
Device,Monitor,
►Press the ON/OFF switch on the front of the device.
The power indicator lights up and the device starts.
Operating systems and management
(device-dependent)
Depending on the configuration level, your device is fitted with one of the following operating systems:
• eLux®
• Windows® 10 IoT Enterprise LTSB
Regardless of the operating system, your device can be managed with the
Scout Enterprise management solution.
eLux®
The eLux Thin Client operating system is based on Linux and is protected against
viruses and malware by the write-protected file system.
It has a lean and modular structure, and thus has low demands on the hardware. It enables access
to the server via the integrated Citrix and Microsoft clients as well as the optional VMware client. It
has a user-friendly licence model, with the possibility of transferring licences to new devices.
Updates for eLux® can be found on the Fujitsu support pages or
on the Internet at "www.myelux.com".
For more information on eLux, go to
"http://www.unicon-software.com/produkte/elux/".
Fujitsu 23
Operation
Windows® 10 IoT Enterprise
The Windows® versions approved by Fujitsu are optimally designed for thin client
applications due to the pre-installed write filter and client software. In addition they
offer an optimum integration into Scout Enterprise or SCCM.
The write protect filter is not enabled in the delivery state, to make it easier to
adapt the thin client to your requirements. Fujitsu strongly advises that the write
protect filter should be enabled during normal operation, because only then is the
typical thin client high security of the device guaranteed. In addition, the enabled
write filter has a positive effect on the durability of the flash memory.
You can find updates for Windows® operating systems on the Internet at "http://support.ts.fujitsu.com".
Please note the licensing restrictions when running a Windows® version for
thin clients, such as for example:
• No desktop functions may be run on the local system.
• Files that are the result of the use of desktop functions are not allowed to
be permanently savedonthelocalsystem.
Additional information
This Product is licensed under the AVC, the VC-1 and the MPEG-4 Part 2 Visual patent
portfolio licenses for the personal and non-commercial use of a consumer to (i) encode video
in compliance with the above standards (“Video Standards”) and/or (ii) decode AVC, VC-1 and
MPEG-4 Part 2 Visual that was encoded by a consumer engaged in personal and non-commercial
activity or was obtained from a video provider licensed to provide such video. None of the
licenses extend to any other product regardless of whether such product is included with this
product in a single article. No license is granted or will be implied for any other use. Additional
information may be obtained from MPEG LA, LLC. See "www.mpegla.com".
To the extent that non-Product software includes AV Technologies licensed by MPEG
LA, LLC under a product category, such license agreement will determine any royalties
due for AV Technologies included in non-Product software.
This Product includes audio encoding and decoding technology from Dolby Laboratories.
Microsoft has licensed Dolby’s two-channel decoder for use in this Product. Company is not
licensed for Dolby Digital Plus decoder for decoding more than two channels and the Dolby
Digital consumer encoder, and Company must separately license such technologies from Dolby.
Company agrees to obtain the license(s) and to pay applicable royalties and other fees. Dolby
considers failure to obtain such licenses to be infringement of Dolby Laboratories intellectual
property rights. Company may apply for a license from Dolby Laboratories using the following
URL: "http://www.dolby.com/professional/technology/licensing/getting-licensed.html".
If you have questions for Dolby Laboratories, Company may contact Dolby Laboratories
at the following email address: "licensinginquiries@dolby.com".
Dolby, Dolby Digital Plus, Dolby Digital Stereo Creator and the double-D symbol are registered
trademarks of Dolby Laboratories. Any use of those marks requires a separate license from Dolby.
Graphics processor supports DirectX 9. Some games and programs may require DirectX 10 or higher
for superior performance and graphics. Check "www.windows.com/Windows10specs" for details.
Some Windows® 10 IoT Enterprise features - such as Windows Hello, support for 5-point touch,
USB peripheral support - may require advanced hardware. Check "ts.fujitsu.com/futro" for details.
24 Fujitsu
Operation
Scout Enterprise Management Suite® – The management
solution for Thin Clients
Basic functionalities
• Multi-administrator policy
• Simple scalability and high availability
• Optimal support of complex organisations
Asset management functions
• Display of serial number and connected monitors
• Illustration of update history
• Flexible licence management
• Display of device, hardware and network information
• Display of installed or connected components, such as mainboard, memory,
display adapters, monitors and USB devices
User-friendliness and handling
• Simple and intuitive operation
• Automatic updates of eLux packages
• Complete audit reporting
Help Desk support
• Support of Wake-On-LAN and Remote Power On/Off
• Mirroring of desktops, encrypted and audit-proof
• Extensive diagnostic information
For more information on Scout Enterprise, go to
"http://www.unicon-software.com/produkte/scout-enterprise/".
More information and manuals are available on the Internet at
"http://www.unicon-software.com/udocs".
Fujitsu 25
Operation
Switching off the device
►Shut down the operating system in the proper way. In Windows: from the
Start menu select the Shut Down option.
Device,Monitor,
►If the operating system does not automatically switch the device into energy-saving mode or
switch it off, press the ON/OFF switch. Warning, this could lead to a loss of data!
If the device is switched off, it consumes a minimum of energy.
The ON/OFF switch does not disconnect the device from the mains voltage. To
completely disconnect the mains voltage, remove the power plug from the power socket.
►If necessary, switch the monitor off (see the operating manual for the monitor).
Activating power-saving mode
Due to customer requirements and requirements of the operating system, the
"Wake-on-LAN" (WoL) function is switched on by default. With the WoL function,
the power draw in OFF mode increases slightly.
To meet the requirements of EC regulation 1275/2008 regarding the implementation of the
Ecodesign directive (2009/125/EC), the default WoL setting must be changed as follows:
►To start the BIOS Setup utility after the system start, press the ON/OFF
switch for two to three seconds.
or
►Press the F2 function key or the Del key.
►In the Power sub-menu, change the External Power Button Control,LAN
and Keyboard settings to disabled.
►To save the setting and exit the BIOS Setup Utility, press function key F4 .
After making this change, the system will achieve the lowest energy
saving mode during shut-down.
In this status, the “Wake-on-LAN” function can no longer be used.
Open BIOS Setup
BIOS-Setup
►When the system starts, press the ON/OFF switch for two to three seconds.
or
►Press (possibly several times) the F2 key.
BIOS Setup will be started. Select one of the tabs to access other setting options in BIOS Setup.
26 Fujitsu
Operation
PXE system boot
PXEsystem boot
►SwitchthedeviceonwiththeON/OFFswitch.
►When starting the system, press the F12 key several times.
The boot menu is displayed.
►Select the desired boot option.
BIOS Update
When should a BIOS update be performed?
Fujitsu Technology Solutions makes new BIOS versions available to ensure compatibility with new
operating systems, new software or new hardware. In addition, new BIOS functions can be integrated.
A BIOS update should also always be performed if there is a problem that cannot
be solved using new drivers or new software.
Where can I obtain BIOS updates?
You can find the BIOS updates on the Internet at "http://support.ts.fujitsu.com/".
Making system settings
Make the system settings as described in the documentation for your operating system.
Executing a system update
Therearetwow
ays of updating your system software:
•viatheUnicon
Product Scout Enterprise
• via an external USB data carrier
For information on the system update, see the documentation on your operating system.
Fujitsu 27
System expansions
System expansions
Upgrades,Device ,System expansionComponentsServicing
Repairs to the device must only be performed by qualified technicians. Incorrect repairs
may greatly endanger the user (electric shock, fire risk) and will invalidate your warranty.
After consulting the Hotline/Help Desk, you may remove and install the components
described in this manual yourself.
As the device has to be shut down in order to install/deinstall system hardware
components, it is a good idea to print out the relevant sections of this chapter beforehand.
A component holder will be needed to install certain components. If the component
holder is not pre-installed, follow the installation instructions in the enclosed supplement
"System expansions for FUJITSU Thin Client FUTRO S940".
The following illustrations may differ slightly from your device, depending on its configuration level.
If further documentation was delivered with your device, please also read this through carefully.
In addition, before removing or installing system components, please pay attention to the following:
The device must be switched off when installing/removing the system
expansions and may not be in energy-saving mode.
Remove the power plug before opening the device.
Be careful that no wires become trapped when removing or installing components.
When installing components that become very hot, make sure that the maximum
permissible temperature of the components in operation is not exceeded.
An update of the BIOS may be required for a system expansion or hardware
upgrade. Further information can be found in the BIOS help section or if
necessary in the Technical Manual for the mainboard.
28 Fujitsu
System expansions
Overview of optional system components
The following optional system components can be installed or combined:
System
compo-
nent
Smart
Card
reader
Speaker Power
over
Ethernet
module
USB3.1
PCIEX4
Card
Parallel
port PCIe
Dual
Serial
Card
PCIe
graphics
card
(Low
Power
Version)
USB3.1
(Type-C)
with
double
screw
secur-
ity
Smart
Card
reader
—
Speaker —
Power
over
Ethernet
module
——————
Parallel
port
—————
USB3.1
PCIEX4
Card
—————
PCIe
Dual
Serial
Card
—————
PCIe
graphics
card
(Low
Power
Version)
—————
USB3.1
(Type-C)
with
double
screw
security
— —
Fujitsu 29
System expansions
Information about boards
Take care with the locking mechanisms (catches and centring pins) when you
are replacing boards or components on boards.
Note that some components on the mainboard may be very hot if the device was
in use shortly before the casing was removed.
To prevent damage to the board or the components and conductors on it, please take care when
you insert or remove boards. Make sure expansion boards are inserted straightly.
Never use sharp objects (screwdrivers) for leverage.
Boards with electrostatic sensitive devices (ESD) are identifiable by the label
shown.
When handling boards fitted with ESDs, you must always observe the
following points:
• You must always discharge static build up (e.g. by touching a grounded
object) before working.
• The equipment and tools you use must be free of static charges.
• Only touch or hold the boards by the edge or, if present, at the areas
marked green (Touch Points).
• Never touch pins or conductors on boards fitted with ESDs.
30 Fujitsu
System expansions
Opening the casing
Casing,Device,
►Switch the device off. The device must not be in power-saving mode.
Please observe the safety information in "Important notes", Page 11.
Disconnect the mains plug from the mains outlet.
Only insert the power plug after you have closed the casing.
Open the casing carefully because there are WLAN cables that lead from the casing
cover to the system and these may break if the casing is opened carelessly.
►Remove any connected wires which are in the way.
2
2
3
1
1
►Loosen the screws at the rear (1).
►Slide the casing cover in the direction of the arrow (2) and swing out the
casing cover towards the front (3).
Fujitsu 31
System expansions
Adding memory
MemorymoduleMainmemoryRemovingmemorySystemexpan sionSystemexpansion
If you want to remove or add memory, proceed as follows:
Please observe the safety information in chapter "Important notes", Page 11.
Use only memory expansions of type DDR4-2400.
Never use force when installing or removing a memory extension.
Make sure that foreign objects do not fall into the memory extension compartment.
Individual components (e.g. the processor heat sink) can become very hot
during operation. We therefore recommend that you wait one hour after
switching off the device before removing or installing the memory modules.
Otherwise, there is a risk of suffering burns!
As some components are exposed that are sensitive to static electricity, please
take note of chapter "Information about boards", Page 30.
Installing a memory module
2
a
1
►Insert the memory module with the contacts
and the recess (a) facing the slot (1).
MemoryexpansionMemorymodule
►Carefully push the memory module
downwards until you feel it click
into place (2).
Removing memory modules
32
1
1
►Carefully push the two mounting
clips outwards (1).
MemoryexpansionMemorymodule
The memory module snaps upwards (2).
►Pull the memory module out of its slot
in the direction of the arrow (3).
32 Fujitsu
System expansions
Install and remove SmartCard reader (optional)
If you are also installing the optional loudspeaker, install the SmartCard
reader before the loudspeaker.
Installing the SmartCard reader
SmartCardread er
If not already installed, you can fit a SmartCard reader.
►Open the casing (see "Opening the casing", Page 31).
►If a PCIe board or power supply is installed, remove the cross piece and PCIe board or power
supply (see "Removing the board", Page 47/"Remove power supply", Page 51).
1
►Carefully remove the cover of the SmartCard reader bay from the casing cover (1).
Fujitsu 33
System expansions
1
2
►Place the carrier for the SmartCard reader in the casing (1).
►Fasten the carrier with the screw (2).
34 Fujitsu
System expansions
2
2
1
4
3
►Place the SmartCard reader on the carrier with the component side facing
downwards, in the direction of the arrow (1).
►Fasten the SmartCard reader onto the carrier with the screws (2).
►Connect the cable to the SmartCard reader (3) and to the connector on the mainboard (4).
►When required, reinstall the cross piece and PCIe board or the power supply (see
"Installing the board", Page 45/"Install power supply", Page 48).
►Close the casing (see "Closing the casing", Page 55).
Make sure that the cables are not trapped between the casing and the components.
Fujitsu 35
System expansions
Removing the SmartCard reader
SmartCardread er
►Open the casing (see "Opening the casing", Page 31).
►If a PCIe board or power supply is installed, remove the cross piece and PCIe board or power
supply (see "Removing the board", Page 47/"Remove power supply", Page 51).
1
2
3
3
4
►Disconnect the cable from the SmartCard reader (1) and from the mainboard (2).
►Undo the screws (3).
►Lift the SmartCard reader from the carrier (4).
►When required, reinstall the cross piece and PCIe board or power supply (see
"Installing the board", Page 45/"Install power supply", Page 48).
►Close the casing (see "Closing the casing", Page 55).
Ensure that cables are not trapped between the casing and the components.
36 Fujitsu
System expansions
Install and remove USB port
Depending on the configuration level of your device, there may be a location intended
for a USB port on the rear panel of the device.
Install USB port
►Remove the casing cover (see chapter "Opening the casing", Page 31).
2
1
3
►Put the USB port into position with the board side upwards on the inside
of the device at the flagged location (1).
►Secure the USB port using the 2 x M2.5 screws provided (3), max. torque 0,4 Nm.
►Connect the cable of the USB port to the connector on the mainboard (3).
►Refitt
he casing cover on the casing (see chapter "Closing the casing", Page 55).
Fujitsu 37
System expansions
Remove USB port
►Remove the casing cover (see chapter "Opening the casing", Page 31).
2
3
1
►Disconnect the cable of the USB port from the connector on the mainboard (1).
►Undo the screws (2) on the USB port.
►Remove the USB port (3).
►Refit the casing cover on the casing (see chapter "Closing the casing", Page 55).
38 Fujitsu
System expansions
Install and remove loudspeaker (optional)
Installing the loudspeaker
Loudspeaker
The required hexagon head bolts are included in the delivery scope of the loudspeaker.
►Open the housing (see "Opening the casing", Page 31).
►If a PCIe board or power supply is installed, remove the cross piece and PCIe board or power
supply (see "Removing the board", Page 47/"Remove power supply", Page 51).
4
1
1
►Secure the hexagon head bolts provided into the screw holes (1).
Fujitsu 39
System expansions
2
1
1
►Insert the loudspeaker into the housing as illustrated.
►Secure the loudspeaker with the screws (1).
►Connect the loudspeaker cable to the connector on the mainboard (2).
►When required, reinstall the cross piece and PCIe board or power supply (see
"Installing the board", Page 45/"Install power supply", Page 48).
►Close the housing (see "Closing the casing", Page 55).
Ensure that the cables are not trapped between the housing and the components.
40 Fujitsu
System expansions
Removing the loudspeaker
Loudspeaker
►Open the housing (see "Opening the casing", Page 31).
►If a PCIe board or power supply is installed, remove the cross piece and PCIe board or power
supply (see "Removing the board", Page 47/"Remove power supply", Page 51).
2
2
1
►Disconnect the loudspeaker cable from the mainboard (1).
►Undo the screws (2).
►Lift the loudspeaker out of the casing and remove the two hexagon bolts.
►When required, reinstall the cross piece and PCIe board or power supply (see
"Installing the board", Page 45/"Install power supply", Page 48).
►Close the housing (see "Closing the casing", Page 55).
Fujitsu 41
System expansions
Installing and removing a Power over Ethernet
module (optional)
You can install an additional Power over Ethernet module in your device.
Before using the module for thefirst time, please observe the notes
in chapter "Getting started", Page 14.
If you are supplying the system with power via the PoE module, ensure that
no additional power supply (mains adapter) is connected.
Installing the Power over Ethernet module
PoweroverEthernetmodule,
►Open the casing (see "Opening the casing", Page 31).
►If a PCIe board or power supply is installed, remove the cross piece and PCIe board or power
supply (see "Removing the board", Page 47/"Remove power supply", Page 51).
1
2
►Break the cover (1) out of the casing.
►Place the Power over Ethernet module in the casing with the component side
facing upwards (2). Ensure that it engages in the slot.
42 Fujitsu
System expansions
1
1
►Secure the Power over Ethernet module with the screws (1).
►Close the casing (see "Closing the casing", Page 55).
Make sure that the cables are not trapped between the casing and the components.
Please note that no PCIe board may be installed when operating via the Power
over Ethernet module (see "Important notes for the preparation for use of your
device using the Power-over-Ethernet module", Page 12)!
Fujitsu 43
System expansions
Removing the Power over Ethernet module
PoweroverEt hernetmodule,
►Open the casing (see "Opening the casing", Page 31).
1
2
1
►Undo the screws (1).
►Pull the Power over Ethernet module in the direction of the arrow (2) out
of the slot and lift it out of the casing.
►When required, reinstall the cross piece and the PCIe board (see "Installing the board", Page 45).
►Close the casing (see "Closing the casing", Page 55).
Ensure that cables are not trapped between the casing and the components.
44 Fujitsu
System expansions
Install and remove board (optional)
You can install various boards (e.g. a graphics card) in the PCI/PCIe slot of your device.
Before using a graphics card for the first time, please pay attention to the
notes in chapter "Important notes for the preparation for use of your device
using the Power-over-Ethernet module", Page 12.
A PCIe board is shown below. The installation and removal procedure is the
same for all types of board, with the exception of the power supply. You can find
information about the installation of an own power supply in chapter "Install and
remove power supply (PSU, Power Supply Unit) (optional)", Page 48.
Installing the board
Board,
You can only install boards with a maximum length of 170 mm.
►Enter the required settings for the board.
►Open the casing (see "Opening the casing", Page 31).
1
2
►Insert the riser card in its slot (1).
►Undo the screw (1) and remove the rear slot cover plate of the slot (2).
Fujitsu 45
System expansions
Do not throw away the rear slot cover plate. For cooling, protection
against fire and in order to comply with EMC regulations, you must refit
the cover plate if you remove the board.
4
2
3
1
►Insert the board into the riser card (1).
►Fix the board with the screw (2).
►Install the cross piece (3).
►Secure the cross piece with the screw (4).
►Close the casing (see "Closing the casing", Page 55).
Make sure that the cables do not become trapped between the
casing and the components!
46 Fujitsu
System expansions
Removing the board
Board,
►Open the casing (see "Opening the casing", Page 31).
1
2
►Loosen the screw (1).
►Remove the board from the riser card (2).
You must reinstall the rear slot cover plate for protection against fire and to
comply with the Electromagnetic Compatibility (EMC) Directive).
►Reinstall the rear slot cover plate by inserting it in the installation slot from
the inside and securing it with the screw.
►Close the casing (see "Closing the casing", Page 55).
Make sure that the cables do not become trapped between the
casing and the components!
Fujitsu 47
System expansions
Install and remove power supply (PSU, Power
Supply Unit) (optional)
In addition to having power supplied via the DC input connector (DC IN) on
the rear of the device, you can also operate the device via its own power
supply. This will be installed in the PCI/PCIe slot.
Install power supply
Board,
►Open the casing (see "Opening the casing", Page 31).
1
►Loosen the screw and the slot’s rear cover plate (1).
48 Fujitsu
System expansions
Do not discard the rear slot cover plate. If you remove the assembly again, you must
reinstall the rear slot cover plate for cooling, protection against fire, and on account of
the EMC regulations to be adhered to (regulations for electromagnetic compatibility).
2
1
►Insert the cross piece (1).
►Fasten the cross piece with the screw (2).
Fujitsu 49
System expansions
2
1
3
2
►Place the power supply in its location (1).
►Secure the power supply with the screws (2).
►Connect the cables on the mainboard (3).
►Close the casing (see "Closing the casing", Page 55).
Make sure that the cables do not become trapped between the
casing and the components!
50 Fujitsu
System expansions
1
2
►Loosen the screw on the crosspiece (1).
►Lift the crosspiece out of the housing (2).
52 Fujitsu
System expansions
You must reinstall the rear slot cover plate for protection against fire and to
comply with the Electromagnetic Compatibility (EMC) Directive).
1
►Re-insert the rear slot cover plate by placing it in the slot from the inside,
and fasteningitwiththescrew(1).
►Close the casing (see "Closing the casing", Page 55).
Make sure that the cables do not become trapped between the
casing and the components!
Fujitsu 53
System expansions
Replacing the lithium battery
In order to permanently save the system information, a lithium battery is installed to provide
the CMOS-memory with a current. A corresponding error message notifies the user when the
charge is too low or the battery is empty. The lithium battery must then be replaced.
Incorrect replacement of the lithium battery may lead to a risk of explosion!
The lithium battery may be replaced only with an identical battery or with
a type recommended by the manufacturer.
Do not dispose of lithium batteries with household waste. They must be disposed
of in accordance with local regulations concerning special waste.
Make sure that you observe the correct polarity when replacing the lithium
battery. The plus pole must be on the top!
Lithiumbattery,Replacing,Replacing,Re placing,lithiumbatteryBattery
The lithium battery holder exists in different designs that function in the same way.
123
1
23
►Press the catch in the direction of the arrow (1).
The battery jumps out of the holder slightly.
►Remove the battery (2).
►Push the new lithium battery of the identical type into the holder (3) and
press it down until it engages.
54 Fujitsu
System expansions
Closing the casing
CasingCasing cover
►Replace the casing cover on the device and push it backwards.
►Secure the casing cover with the two screws on the rear of the device.
Make sure that the cables are not trapped between the casing and the components.
►Connect all the cables removed before.
Fujitsu 55
Technical data
Technical data
Technicaldata
FUJITSU Thin Client FUTRO S940
Electrical data
Processor: Intel Pentium J5005, Gemini Lake Quad Core 1,5 GHz (max. 2,8 GHz
Single Core Burst Freq.) with integrated Intel UHD Graphics 605
Rated voltage: With AC adapter: 19 – 20 V
With internal PSU: 100 – 240 V
Max. rated current: With AC adapter: 2,0 A or 3,25 A
With internal PSU: 1,0 A
Dimensions (vertical operating position)
Width x Depth x Height
(with foot):
90 mm x 193 mm x 261 mm / 3,54 inches x 7,60 inches x 10,28 inches
Width x Depth x Height
(without foot):
52 mm x 193 mm x 250 mm / 2,05 inches x 7,60 inches x 9,84 inches
Dimensions (horizontal operating position, without WLAN)
Width x Depth x Height
(with foot):
289 mm x 193 mm x 63 mm / 11,38 inches x 7,60 inches x 2,48 inches
Width x Depth x Height
(without foot):
250 mm x 193 mm x 52 mm / 9,84 inches x 7,60 inches x 2,05 inches
Weight
in basic configuration: approx. 1.3 kg / 2.87 lbs
Environmental conditions
Temperature:
• Operation
• Transportation
15 °C .... 35 °C / 59 °F ... 95 °F
–25 °C .... 60 °C / –13 °F ... 140 °F
Clearance required
to ensure adequate
ventilation:
Minimum of 200 mm / 7.87 inches on all sides
Maximum permissible
operating height
3000 m (9842 ft), for China only 2000 m (6557 ft)
Condensation must be avoided during operation.
56 Fujitsu
Technical data
AC adapter
Electrical data
Rated voltage: 100 – 240 V
Max. rated current: 1.2A(40W)or1.5A(65W)
Rated frequency: 50 – 60 Hz
Only the following adapters with Limited Power Source may be used:
• 40W: S26113-E622-V55 Model: ADP-40HH A
• 65W: S26113-E623-V55 Model: ADP-65JH AB
Internal AC adapter
Electrical data
Rated voltage: 100 - 240 V
Max. rated current: 1,0 A
Rated frequency: 50 – 60 Hz
Only the following internal adapter may be used: S26113-E598-V50 Model: DPS-65AB-2A
Fujitsu 57
Index
Index
A
Audio input 19
line in 7
Audio output 19
line out 6
Line Out 7
B
Base feet 14, 17
Battery 54
BIOS-Setup
opening 26
Board,
installing 45, 48
removing 47, 51
C
Casing
closing 55
Casing cover 55
Casing,
opening 31
Components
installing/removing 28
Connecting a PS/2 keyboard 20
Connecting,
keyboard 20
mouse 20
PS/2 keyboard 20
PS/2 mouse 20
USB keyboard 20
D
Data protection 8
DC input connector
DC IN 7
Device
Ports 19
Device drivers,
serial interface 21
Device,
opening 31
switching off 26
switching on 23
transporting 12
upgrades 28
Devices,
connecting 21
DisplayPort 19
Disposal 13
E
Energy saving 13
External devices
Ports 19
External devices,
connecting 21
F
Flash memory access 6
G
Getting started 14
H
Headphone port 6
Headphones 19
connecting 22
Horizontal operating position 17
I
Important notes 11
Installation opening
for modules 7
K
Keyboard port 19
Keyboard,
connecting 20
port 20
L
LAN 22
LAN port 19
LAN socket 7
Line in 19
Line out 19
Line-out devices
connecting 22
Lithium battery,
replacing 54
Loudspeaker
installing 39
removing 41
58 Fujitsu
Index
M
Main memory
see Adding memory 32
Memory expansion
installing 32
removing 32
Memory module
important notes 32
installing 32
removing 32
Microphone
connecting 22
Microphone port 6, 19
Monitor port 7
Monitor,
Connecting 20
switching off 26
switching on 23
Mouse port 19
Mouse,
connecting 20
N
Note
safety 11
Notes
important 11
O
Off switch 6
On switch 6
Operating position, horizontal 17
Operating position, vertical 14
P
PCI slot 7
PCIe slot 7
Ports 6, 19
Power cable
connection 22
Power over Ethernet module,
installing 42
removing 44
Power-on indicator 6
Preparing for operation 22
Property protection 8
Protection, property and data 8
PS/2 keyboard port 7
PS/2 mouse port 7, 19
PS/2 mouse,
connecting 20
port 20
PXE system boot 27
R
Recycling 13
Removing memory
see Adding memory 32
Replacing,
lithium battery 54
Replacing, lithium battery 54
Retransportation 12
S
Safety notes 11
Security Lock
Security Lock device 7
Serial interface 21
Serial interface,
connecting devices 21
settings 21
Serial port 7, 19
Servicing 28
Side cover 14
SmartCard reader
indicator 6
installing 33
removing 36
System expansion 28, 32
see Adding memory 32
System unit, see Device 12
T
Technical data 56
Transportation 12
U
Universal Serial Bus 19
Upgrades,
device 28
USB
ports 6
USB devices,
connecting 21
USB port 20
USB port,
connecting devices 21
connecting keyboard 20
connecting the mouse 20
USB ports 7
V
Vertical operating position 14
Fujitsu 59
Index
60 Fujitsu