Table of Contents
- FUJITSU LIFEBOOK T725
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Opening the notebook
- Switching on the notebook
- Different ways to use your notebook
- Switching off the notebook
- Closing the notebook
- Handwriting recognition
- LCD screen
- Using the device as a Tablet PC
- Using the device as a notebook
- Keyboard
- Tablet buttons
- Webcam
- Rechargeable battery
- Module
- Optical drive
- Using the power-management features
- Memory cards
- Loudspeakers and microphones
- SIM card
- Optional Wireless LAN / Bluetooth / UMTS / LTE wireless components
- Ethernet and LAN
- Your Port Replicator (optional)
- Security functions
- Brief overview of security functions
- Configuring the fingerprint sensor
- Using the Security Lock
- Configuring password protection in BIOS Setup Utility
- SmartCard reader
- SmartCard SystemLock (optional)
- Access rights of SmartCards
- SmartCard user groups
- Installing SystemLock
- Setting up the first system in a user group or a stand-alone system for use with SystemLock
- Adding a system to a user group
- Carrying out administrator functions
- Remote Access Enabling – F4
- Switch on the device using SystemLock
- Start BIOS Setup F2
- Changing PIN
- Uninstall SystemLock
- Error messages
- Trusted Platform Module (TPM) (device-dependent)
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Help if problems occur
- The notebook's date or time is incorrect
- Battery indicator does not illuminate
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The notebook cannot be started
- The notebook stops working
- The printer does not print
- The radio connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised.
- SmartCard PIN forgotten
- SmartCard lost
- User and/or supervisor SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Restoring the contents of the hard disk under Windows
- Technical data
- Manufacturer’s notes
- Index
Fujitsu T725 User Manual
Displayed below is the user manual for T725 by Fujitsu which is a product in the Notebooks category. This manual has pages.
Related Manuals
System
Operating manual
FUJITSU LIFEBOOK T725
Congratulations on your purchase of an innovative
product from Fujitsu.
The latest information about our products, tips, updates etc. can be found
on the Internet at: "http://www.fujitsu.com/fts/"
You can find driver updates at: "http://support.ts.fujitsu.com/download"
Should you have any technical questions, please contact:
• our Hotline/Service Desk (see the Service Desk list or visit:
"http://support.ts.fujitsu.com/contact/servicedesk")
• Your sales partner
• Your sales office
We hope you enjoy working with your new Fujitsu system!
FUJITSU LIFEBOOK T725
Operating manual
Innovative technology 7
Ports and controls 9
Important notes 12
First-time setup of your device 16
Working with the notebook 20
Security functions 69
Connecting external devices 91
Removing and installing components
during servicing 97
Settings in BIOS Setup Utility 105
Troubleshooting and tips 108
Technical data 117
Manufacturer’s notes 121
Index 128
Remarks
Information on the product description meets the design specifications of Fujitsu and
is provided for comparison purposes. Several factors may cause the actual results to
differ. Technical data is subject to change without prior notification. Fujitsu rejects any
responsibility with regard to technical or editorial mistakes or omissions.
Trademarks
Fujitsu, the Fujitsu logo and LIFEBOOK are registered trademarks of Fujitsu Limited
or its subsidiaries in the United States and other countries.
Microsoft and Windows are trademarks or registered trademarks of the Microsoft
Corporation in the United States and/or other countries.
Adobe Reader is a trademark of Adobe Systems Incorporated.
All other trademarks specified here are the property of their respective owners.
Copyright
No part of this publication may be copied, reproduced or translated without
the prior written consent of Fujitsu.
No part of this publication may be saved or transferred by any electronic means
without the written approval of Fujitsu.
Contents
Contents
Innovative technology ................................................................. 7
Furtherinformation ...................................................................... 7
Notational conventions .................................................................. 8
Ports and controls ..................................................................... 9
Importantnotes ........................................................................ 12
Safetynotes ............................................................................ 12
Additional safety notes for devices with radio components . . . . . ............................. 12
Energysaving .......................................................................... 13
Energy saving under Windows ....................................................... 13
Travelling withyournotebook ............................................................ 14
Beforeyoutravel ................................................................... 14
Transporting the notebook ........................................................... 14
Cleaningthenotebook .................................................................. 15
First-time setup ofyour device ......................................................... 16
Unpacking and checking the device ...................................................... 16
Selectingalocat
ion ..................................................................... 17
Mains adapter connecting ............................................................... 17
Switchingonthedevice for the firsttime .................................................. 18
Working with the notebook ............................................................ 20
Statusindicators ........................................................................ 20
Openingthenotebook ................................................................... 22
Switching on the notebook . . . . ........................................................... 23
Programming theON/OFFswitch ..................................................... 23
Different ways to use your notebook . . . ................................................... 24
From notebook to Tablet PC . . . ....................................................... 24
Selectdisplayorientation(portraitorlandscapeorientation) ............................. 26
From TabletPCtonotebook .......................................................... 27
Switching off the notebook . . . . ........................................................... 28
Closing the notebook . . .................................................................. 29
Handwriting recognition .................................................................. 29
LCDscreen ............................................................................ 30
AmbientLightSensor ................................................................ 30
Usingthe deviceasa TabletPC .......................................................... 31
Using fingers ....................................................................... 31
Usingthepen ....................................................................... 36
Usingthe deviceasa notebook .......................................................... 41
Touchpad and touchpadbuttons ...................................................... 41
Keyboard ............................................................................... 43
Virtualnumerickeypad .............................................................. 45
Country and keyboard settings ....................................................... 45
Key combinations ................................................................... 46
Tabletbuttons .......................................................................... 48
Webcam ............................................................................... 49
Rechargeablebattery ................................................................... 50
Charging, caringforandmaintaining the battery ....................................... 50
Removingandinstallingthebattery ................................................... 50
Battery chargestatusindicator ....................................................... 53
Module ................................................................................. 54
Fujitsu 3
Contents
Removing a module . ................................................................ 54
Installing a module . . ................................................................ 55
Opticaldrive ............................................................................ 55
Handling data carriers . . . ............................................................ 55
CD/DVDindicator ................................................................... 56
Inserting or removing adatacarrier ................................................... 56
Manual removal (emergency removal) . . . ............................................. 57
Using the power-management features . . ................................................. 58
Memory cards .......................................................................... 59
Supported formats .................................................................. 59
Inserting the memorycard ........................................................... 59
Removingthememorycard .......................................................... 59
Loudspeakers and microphones . . ........................................................ 60
SIM card ............................................................................... 61
Inserting the SIM card ............................................................... 61
RemovingtheSIMcard .............................................................. 61
Optional Wireless LAN / Bluetooth / UMTS / LTE wireless components . . . ................... 62
Switching the wireless components on and off ......................................... 62
SettingupWLAN access ............................................................ 62
AccessviaUMTS /LTE .............................................................. 63
UMTS/LTEantenna ................................................................. 63
EthernetandLAN ....................................................................... 64
Your Port Replicator (optional) . . . ........................................................ 65
Ports on thePortReplicator .......................................................... 65
Settinguptheportreplicator ......................................................... 66
Connecting the notebook to the Port Replicator . . . . . .................................. 66
Connecting the mains adapter to the Port Replicator . .................................. 67
Switching on the notebook via the port replicator . . . . . .................................. 67
Disconnecting the notebook from the Port Replicator .................................. 68
Securityfunctions ..................................................................... 69
Briefoverview of security functions ....................................................... 70
Configuring the fingerprint sensor ........................................................ 71
UsingtheSecurity Lock ................................................................. 71
Configuringpassword protection in BIOSSetupUtility ...................................... 72
Protecting BIOS Setup Utility (supervisor and user password) . .......................... 72
Password protection for booting of the operating system . .............................. 73
Passwordprotectionfortheharddisk ................................................. 74
SmartCard reader ....................................................................... 74
Inserting the SmartCard ............................................................. 74
SmartCardSystemLock(optional) ........................................................ 75
Accessrights of SmartCards ......................................................... 76
SmartCard user groups . . ............................................................ 77
InstallingSystemLock ............................................................... 78
Settingupthefirst system in a user group or a stand-alone system for use with SystemLock
..................................................................................... 78
Addinga systemtoa usergroup ..................................................... 82
Carryingoutadministratorfunctions ................................................... 84
Remote Access Enabling – F4 ...................................................... 86
Switchon the deviceusing SystemLock ............................................... 87
Start BIOS Setup F2 ............................................................... 87
Changing PIN ....................................................................... 87
Uninstall SystemLock ................................................................ 87
4Fujitsu
Contents
Errormessages ..................................................................... 88
Trusted Platform Module (TPM) (device-dependent) . . . .................................... 89
Enabling TPM . ...................................................................... 89
Disabling TPM ...................................................................... 89
Enable password entry using the on-screen keyboard (on-screen keyboard for BitLocker
password) .......................................................................... 90
Connecting externaldevices ........................................................... 91
Connecting an external monitor . . . ....................................................... 92
HDMI port .......................................................................... 93
Connecting USB devices . . . . . ........................................................... 93
USB port withchargingfunction (Anytime USB charge) ................................. 94
Connecting an external SATA hard disk (eSATA) (port replicator only) . . . . . . .............. 95
Safe removalofeSATAandUSBdevices ............................................. 95
Connecting external audio devices ....................................................... 96
Microphone port/Line In . . . ........................................................... 96
Headphone port . . . .................................................................. 96
Removing and installing components during servicing . . . . ............................. 97
Notes on installingandremoving boardsandcomponents .................................. 97
Preparing to remove components . ....................................................... 98
Installing and removing memory expansion . . . . ............................................ 98
Removingacover ................................................................... 99
Removingmemorymodules .......................................................... 99
Installinga memorymodule .......................................................... 100
Attaching the cover .................................................................. 100
Removingandinstallingtheharddisk .................................................... 101
Removingacover ................................................................... 101
Removingaharddisk ............................................................... 102
Installinga harddisk ................................................................. 103
Attaching the cover .................................................................. 104
Finishing component removal . ........................................................... 104
Settings in BIOS Setup Utility . . . ....................................................... 105
StartingtheBIOSSetup Utility ........................................................... 105
OperatingBIOSSetup Utility ............................................................. 106
ExitingBIOSSetupUtility ................................................................ 107
Exit Saving Changes - save changes and exit BIOS Setup Utility . . ..................... 107
Exit Discarding Changes – Discard changes and exit BIOS Setup Utility . . . .............. 107
Load Setup Defaults – Copy Standard Entries . ........................................ 107
Discard Changes – Discard changes without exiting the BIOS Setup Utility . .............. 107
Save Changes - save changes without exiting the BIOS Setup Utility . . . . . . .............. 107
Save Changes and Power Off ....................................................... 107
Troubleshooting and tips .............................................................. 108
Help ifproblemsoccur ................................................................... 108
The notebook’s date or time is incorrect ................................................... 109
Battery indicator does not illuminate . . . ................................................... 109
Whencertaincharactersareentered on the keyboard, onlynumerals are written ............. 109
The notebook’s LCD screen remains blank . . . . ............................................ 109
The LCD screen is difficulttoread ........................................................ 110
The externalmonitorremains blank ...................................................... 110
The externalmonitorisblankorthe imageisunstable ..................................... 110
The cursor does not correctly follow the pen movements . . . . . . ............................. 111
Fujitsu 5
Contents
Pen input not working . . . ................................................................ 111
The notebook cannot be started . . ........................................................ 111
The notebookstops working ............................................................. 112
The printer does not print ................................................................ 112
The radio connection to a network does not work . ......................................... 112
The batterydischarges too quickly ........................................................ 113
SmartCard reader is not recognised. . . . . . ................................................. 113
SmartCardPINforgotten ................................................................ 113
SmartCardlost ......................................................................... 113
User and/or supervisor SmartCard lost . . ................................................. 114
Acoustic warnings ....................................................................... 114
Error messages on the screen . . . ........................................................ 115
Restoring the contents of the hard disk under Windows . . .................................. 116
Restoring the system under Windows 8/8.1 . . . ......................................... 116
Restore factory settings and reinstall the operating system with the Hard Disk Based
Recovery (HDBR) under Windows 7 ................................................. 116
Technical data ......................................................................... 117
Notebook . . . . ........................................................................... 117
Port Replicator(optional) ................................................................ 119
Rechargeable battery . . . ................................................................ 119
Mains adapter for use with the notebook and port replicator . . .............................. 120
Manufacturer’snotes .................................................................. 121
Disposalandrecycling .................................................................. 121
DeclarationsofConformity ............................................................... 121
CE marking ............................................................................ 121
Other certificationmarkings .............................................................. 122
Regulatory notices ...................................................................... 122
Regulatory information for notebooks without radio device .............................. 122
DOC (Industry CANADA) notices . . . . ................................................. 123
FCC regulatory information for notebooks with radio device . . . .......................... 125
Index .................................................................................. 128
6Fujitsu
Innovative technology
Innovative technology
... and ergonomic design make your device a reliable and convenient companion.
The device boots very quickly, is ready for immediate use and offers a particularly
long operating time because of its high capacity battery.
With the user-friendly "BIOS Setup Utility" you can control your notebook’s hardware and better
protect your system against unauthorised access by using the powerful password properties.
Information on the connections and user components of your notebook
canbefoundin"Ports and controls", Page 9.
Further information
The Windows drivers for your device can be found on our Internet site.
The factory installation of your device does not support any other operating
system. Fujitsu Technology Solutions accepts no liability whatsoever
if any other operating system is used.
Software oriented components of these instructions refer to Microsoft products,
if they come within the scope of the delivery.
If you install other software products, pay attention to the operating
instructions of the manufacturer.
Fujitsu 7
Innovative technology
Notational conventions
Pay particular attention to text marked with this symbol. Failure to observe
these warnings could pose a risk to health, damage the device or lead
to loss of data. The warranty will be invalidated if the device becomes
defective through failure to observe these warnings.
Indicates important information for the proper use of the device.
►Indicates an activity that must be performed
Indicates a result
This font indicates data entered using the keyboard in a program dialogue or at
the command line, e.g. your password (Name123) or a command used to
start a program (start.exe)
This font indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
This font Indicates
• terms and texts used in a software interface, e.g.: Click on Save
• names of programs or files, e.g. Windows or setup.exe.
"This font" Indicates
• cross-references to another section, e.g. "Safety information"
• cross-references to an external source, e.g. a web address: For more
information, go to "http://www.fujitsu.com/fts/"
• Names of CDs, DVDs and titles or designations for other materials,
e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual
Key indicates a key on the keyboard, e.g: F10
This font indicates terms and texts that are emphasised or highlighted, e.g.: Do
not switch off the device
8Fujitsu
Ports and controls
Ports and controls
This chapter presents the individual hardware components of your device. It gives you
an overview of the device’s indicators and connections. Please familiarise yourself with
these components before you start to work with the device.
Notebook open
4
1
23
1
6
57
78
9
14
11
12
13
15
16
10
10
1 = Microphone
2 = WebCam
3 = WebCam LED
4 = UMTS/LTE antenna
5 = Fingerprint sensor (device dependent)
6 = Ambient light sensor
7 = Loudspeakers
8 = Windows button
9 = ON/OFF switch
10 = Status indicators
11 = Keyboard
12 = Touchpad
13 = Touchpad buttons
14 = Eject button for pen
15 = Eyelet for the optional pen tether
16 = Memory card slot
Fujitsu 9
Ports and controls
Left panel
1 2 3 5 76
4
1 = DC input connector (DC IN)
2 = VGA monitor port
3 = HDMI port
4 = SmartCard reader (device-dependent)
5 = USB port 3.0 with charging function
(Anytime USB charge)
6 = Microphone jack
7 = Headphone port
Rear
1 2 3
1 = USB port 3.0
2 = LAN port
3 = Volume – button, volume + button
10 Fujitsu
Ports and controls
Right-hand side
1 2 3 4
1=Penslot
2 = Module bay with optical drive
3 = USB port 3.0
4 = Security Lock device
Bottom
12
3
4
5
6
7
8
9
1 = Hard disk service compartment
2 = Memory service compartment
3 = Module bay with optical drive
4 = Module bay release button
5 = Battery lock slider
6 = Battery with SIM card slot under the battery
7 = Battery charge status indicator
8 = Port for port replicator
9 = Battery lock slider
Fujitsu 11
Important notes
Important notes
ImportantnotesNotes
This chapter contains essential safety information which must be followed
when working with your notebook. Other notes also provide useful information
which will help you with your notebook.
Safety notes
SafetynotesNotes
Please follow the safety notes provided in the "Safety/Regulations" manual
as well as the safety notes given below.
Please pay special attention to the sections in the manual marked
with the symbol on the left.
When connecting and disconnecting cables, observe the relevant
notes in this operating manual.
Read the information on the ambient conditions in the "Technical data",
Page 117 and "First-time setup of your device", Page 16 before preparing your
notebook for use and switching it on for the first time.
When cleaning the device, please observe the relevant notes in the
section "Cleaning the notebook", Page 15.
Pay attention to the additional safety notes for devices with radio components
provided in the "Safety/Regulations" manual.
Please refer to the notes in the chapter "Removing and installing
components during servicing", Page 97.
This notebook complies with the relevant safety regulations for data processing
equipment. If you have questions about using your notebook in a particular area,
please contact your sales outlet or our Hotline/Service Desk.
Additional safety notes for devices with
radio components
Radiocomponent :WirelessLAN:Bluetooth,safetynotes
If a radio component (Wireless LAN, Bluetooth, UMTS, LTE) is incorporated into your notebook,
you must be sure to observe the following safety notes when using your notebook:
• Switch off the radio components when you are in an aircraft or driving in a car.
• Switch off the radio components when you are in a hospital, an operating room or near a medical
electronics system. The transmitted radio waves can impair the operation of medical devices.
• Switch off the radio components when you let the device get near flammable
gases or into hazardous environments (e.g. petrol station, paintshops), as the
transmitted radio waves can cause an explosion or a fire.
For information on how to switch radio components on and off, see chapter
"Switching the wireless components on and off", Page 62.
12 Fujitsu
Important notes
Energy saving
NotesEnergyEnergysaving
Switch the notebook off when it is not in use. Switch off external, connected devices if you
are not using them. If you use the energy saving functions, the notebook uses less energy.
You will then be able to work for longer before having to recharge the battery.
Energy efficiency is increased and the environmental impact is reduced.
You save money while protecting the environment.
Energy saving under Windows
►Make use of the power management features (see ""Using the power-management features",
Page 58").
Fujitsu 13
Important notes
Travelling with your notebook
MobileoperationNotesTrans porta tionNotebook
Please observe the points listed below when travelling with your notebook.
Before you travel
►Back up important data stored on your hard disk.
NotebookTravel,notebook
►Switch off the radio component for data security reasons. With data traffic via a wireless
connection, it is also possible for unauthorised third parties to receive data.
Information on activating data encryption is provided in the documentation
for your radio component.
►If you wish to use your notebook during a flight, first check with the flight
attendants if it is OK to do so.
When travelling in other countries
►If you are travelling abroad, check that the mains adapter can be operated with the
local mains voltage. If this is not the case, obtain the appropriate mains adapter for
your notebook. Do not use any other voltage converter!
►Check whether the local mains voltage and the power cable are compatible. If this is
not the case, buy a power cable that matches the local conditions.
►Enquire with the corresponding government office of the country you will be
travelling in as to whether you may operate the radio component integrated in your
notebook there (see also "CE marking", Page 121).
Transporting the notebook
Protect the notebook from severe shocks and extreme temperatures
(e.g. direct sunlight in a car).
►If your device has an optical drive, remove all data media (e.g. CD, DVD) from the drives.
TransportationNotebook
►Switch the notebook off.
►Unplug the mains adapter and all external devices from the power socket.
►Disconnect the mains adapter cable and the data cables for all external devices.
►Close the LCD screen.
►To protect against damaging jolts and bumps, use a notebook carrying
case to transport your notebook.
14 Fujitsu
Important notes
Cleaning the notebook
Do not clean any interior parts yourself; leave this job to a service technician.
Only use cleaning products designed for computers. Normal household
cleaners and polishes can damage the markings on the keyboard and the
device, the paintwork or the notebook itself.
Ensure that no liquid enters the notebook.
The LCD screen very sensitive to scratches. Only clean the display
surface with a very soft, slightly damp cloth.
►Switch the notebook off.
CleaningNotesNotebo okKeyboardTouchpadLCDscreenCrystalView display
►In order to prevent accidentially switching the device on, remove the power cable from the mains
adaptor and remove the battery (see "Removing and installing the battery", Page 50).
The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth which has
been moistened in mild domestic detergent and then carefully wrung out.
To clean the keyboard and the touchpad, if available, you can use disinfectant wipes.
Ensure that no liquid enters the device.
Fujitsu 15
First-time setup of your device
First-time setup of your device
First- timese tupGettingstarted
Please read the chapter "Important notes", Page 12.
If your device is equipped with a Windows operating system, the necessary
hardware drivers and supplied software are already pre-installed.
Before you switch on the device for the first time, connect it to the mains voltage
using the mains adapter, see "Mains adapter connecting", Page 17.Themains
adapter must be connected during the entire installation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
On delivery, the battery can be found in the battery compartment or in the accessories kit.
The battery must be charged if you want to operate your device using the battery.
When used on the move, the built-in battery provides the device with the necessary power. You
can increase the operating time by using the available energy-saving functions.
For instructions on how to connect external devices (e.g. mouse, printer) to your
device, please refer to the operating manual for your device.
Unpacking and checking the device
Should you discover any damage that occurred during transportation,
notify your local sales outlet immediately!
►Unpack all the individual parts.
PackagingT ransport
►Check your device for any visible damage which may have occurred during transportation.
You may need the packaging in the future, if you need to transport your device.
16 Fujitsu
First-time setup of your device
Selecting a location
SelectingalocationDeviceMainsadapter
Select a suitable location for the device before setting it up. Follow
the instructions below when doing so:
• Never place the device or the mains adapter on a heat-sensitive surface.
The surface could be damaged as a result.
• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air vents and cause overheating and damage.
• The underside of the device heats up during normal operation. Prolonged contact
with the skin may become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of the device may mark certain types of delicate surfaces.
• Keep other objects at least 100 mm / 3.97" away from the device and
its mains adapter to ensure adequate ventilation.
• Never cover the ventilation slots of the device.
• Do not expose the device to extreme environmental conditions. Protect
the device from dust, humidity, and heat.
Mains adapter connecting
Preparingforo perationMainsadapter
Observe the safety notes in the enclosed "Safety/Regulations" manual.
The supplied power cable conforms to the requirements of the country in
which you purchased your device. Make sure that the power cable is approved
for use in the country in which you intend to use it.
3
1
2
►Connect the power cable (1) to the
mains adapter.
►Plug the mains cable (2) into a mains outlet.
►Connect the mains adapter cable (3) to
the DC jack (DC IN) of the device.
Fujitsu 17
First-time setup of your device
Switching on the device for the first time
Switchingonforthefirstt ime
On devices with ON/OFF switch for wireless components: Slide the ON/OFF switch
for wireless components to the ON position before switching on the device.
When you switch on the device for the first time, the supplied software is
installed and configured. Because this procedure must not be interrupted,
you should set aside enough time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
To make it easier to use your device for the first time, the operating system
is pre-installed on the hard disk.
1
►Slide the ON/OFF switch (1) to the right to switch on the notebook.
The ON/OFF switch returns automatically to its original position.
►During installation, follow the instructions on screen.
18 Fujitsu
First-time setup of your device
If a Windows operating system is installed on your device, you will find more
information on the system and drivers, help programmes, updates, manuals etc. on
the device or on the Internet under "http://www.fujitsu.com/fts/support/".
You can find information and help on the Windows operating system functions
on the Internet at "http://windows.microsoft.com".
Fujitsu 19
Working with the notebook
Working with the notebook
Notebook,operat ionNotebook
This chapter describes the basics for operating your notebook. Please read the chapter
entitled "Connecting external devices", Page 91 for instructions on how to connect
devices such as a mouse and a printer to the notebook.
Please refer to the notes in "Important notes", Page 12.
Status indicators
StatusindicatorsSymbols
The status indicators provide information about the status of the power supply,
the drives and the keyboard functions etc.
20 Fujitsu
Working with the notebook
Status displays Description
Power-on indicator
• Indicator is illuminated: The notebook is switched on.
• Indicator flashes: The notebook is in sleep mode (Save-to-RAM).
• The indicator is not illuminated: The notebook is switched off or in
Save-to-Disk mode.
Battery charging indicator
The battery charging indicator shows whether a battery is installed and being
charged.
Battery indicator
This description applies for both batteries.
The battery indicator shows the state of charge of the installed battery.
• The indicator is lit green: The battery is between 51 % and 100 %
charged.
• The indicator is lit orange: The battery is between 13 % and 50 %
charged.
• The indicator is lit red: The battery is between 0 % and 12 % charged.
• The indicator flashes orange: The battery state of charge is being
checked (for four seconds after battery installation).
• The indicator flashes red: The battery is faulty.
• The indicator is not lit: There is no battery installed.
Note: You can also check the state of charge directly at the main battery.
Drive indicator
Indicator is illuminated: The hard disk drive or the CD/DVD in the optical drive
of the notebook is being accessed.
Radio components indicator
• The indicator is lit: The radio components are switched on.
• The indicator is not lit: The radio components are switched off.
Num Lock indicator
Indicator is lit: The Num key has been pressed. The virtual numerical
keypad is activated. You can output the characters indicated on the upper
rightofthekeys.
Caps Lock indicator
Indicator is lit: The Caps Lock key has been pressed. All letters will be output
as uppercase letters. In the case of keys labelled several times, the character
printed on the upper left of the key will appear when that key is pressed.
Scroll Lock indicator
Indicator is lit: The key combination Fn +Scr has been pressed. The effect
that this key has varies between applications.
Fujitsu 21
Working with the notebook
Opening the notebook
►Open the LCD screen.
22 Fujitsu
Working with the notebook
Switching on the notebook
Notebook:sw itching onPower-onindicatorSuspend/Resume button
1
►Slide the ON/OFF switch (1) to the right to switch on the notebook.
The ON/OFF switch returns automatically to its original position.
The power-on indicator lights up.
Programming the ON/OFF switch
You can program the ON/OFF switch:
Operating system Menu
Windows 7 Start - (Settings) - Control Panel - System and
Security - Power Options
Windows 8.1 Windows 8.1 Desktop - Control Panel - Hardware
and Sound - Power Options
If you have assigned a password, you must enter this when requested to
do so, in order to start the operating system. Detailed information can be
found in the chapter "Security functions", Page 69.
Fujitsu 23
Working with the notebook
Different ways to use your notebook
During your daily work, you can use your notebook as a Tablet PC or as a notebook, just as you wish.
Note the direction of rotation in the following description! No guarantee claims
can be met for damage caused by turning in the wrong direction.
You must note that the display cannot be turned completely on its own axis!
From notebook to Tablet PC
►Raise the LCD display into a vertical position.
24 Fujitsu
Working with the notebook
►Hold the screen as low as possible on both sides. Turn the screen to the left or right in the direction
of the arrow. At first you will feel some slight resistance, then it will turn easily and without friction.
►Turn the display further until it has turned 180° and the hinge latches in.
Fujitsu 25
Working with the notebook
►Now fold the screen down until the back of the screen is flat on top of the keyboard.
The screen is now secured in the tablet position.
Select display orientation (portrait or landscape orientation)
Landscapeorientation
Portraitorientation
Displayorientation
You can choose to use either portrait or landscape orientation for the display.
Windows 7
You can change these settings in the Fujitsu menu or under Start -(Settings -)
Control Panel -Hardware and Sound -Display -Settings.
Windows 8.1
You can change these settings under Windows 8.1 Desktop - Control Panel -
Hardware and Sound - Windows Mobility Center / Rotate screen.
In the Fujitsu Tablet Controls settings, profiles are saved for operation
with different screen orientations. These profiles have preset standard
configurations that can be modified as desired.
These settings do not just affect the screen settings on the Tablet PC, but
also those on externally connected monitors.
26 Fujitsu
Working with the notebook
From Tablet PC to notebook
►Raise the LCD screen into a vertical position.
Fujitsu 27
Working with the notebook
Note the direction of rotation in the following description! No guarantee claims
can be met for damage caused by turning in the wrong direction.
►hold the screen as near to the bottom as possible on both sides and turn the screen in the
direction indicated by the rotational direction indicator. It will turn easily and without resistance.
►Turn or move the display further until it has turned 180° and the hinge latches in.
Switching off the notebook
Notebook
►Close all applications and then shut down the operating system (please
see the "Operating System Manual").
►Slide the ON/OFF switch towards the right.
The ON/OFF switch returns automatically to its original position.
28 Fujitsu
Working with the notebook
Closing the notebook
►Fold the LCD screen down onto the lower part of the notebook until you feel it lock into place.
Handwriting recognition
For detailed information on handwriting recognition, see the documentation on your operating system.
At present, handwriting recognition under Windows 7 or Windows 8.1
supports the following languages:
English, German, French, Italian, Japanese, Korean, Chinese (traditional and simplified), Dutch,
Portuguese, Spanish, Brazilian, Norwegian (Bokmål and Nynorsk), Swedish, Finnish, Danish,
Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian.
Under Windows 8.1 you can set the required language under Control Panel –
Time, Language and Region – Language.
Fujitsu 29
Working with the notebook
LCD screen
LCDscreenNotes
Fujitsu notebooks have high-quality LCD monitors (TFT). For technical reasons, these
monitors are manufactured for a specific resolution. An optimal, clear picture can only
be ensured with the resolution intended for the relevant monitor. A resolution which
differs from the specification can result in an unclear picture.
The resolution of your notebook’s monitor is optimally set at the factory.
Current production technology cannot guarantee an absolutely fault-free screen display. A few
isolated constantly lit or unlit pixels (picture elements) may be present. The maximum permitted
number of faulty pixels is stipulated in the international standard ISO 9241-307 (Class 2).
Example:
A screen with a resolution of 1280 x 800 has 1280 x 800 = 1024000 pixels. Each pixel consists of
three subpixels (red, green and blue), so there are almost 3 million subpixels in total. According to ISO
9241-307 (class 2), a maximum of 2 light and 2 dark pixels and in addition 5 light or 10 dark subpixels
or an equivalent mix (1 light subpixel counts as 2 dark subpixels) are allowed to be defective.
At a resolution of 1600 x 900 = 1440000 pixels, a maximum of 3 light and 3 dark pixels
and in addition 7 light or 14 dark subpixels are allowed to be defective.
Pixel A pixel consists of 3 subpixels, normally red, green and
blue. A pixel is the smallest element that can be generated
by complete functionality of the display.
Subpixel A subpixel is a separately addressable internal structure
within a pixel that enhances the pixel function.
Cluster A cluster contains two or more defective pixels or
subpixels in a 5 x 5 pixel block.
Background lighting
LCD monitors are operated with background lighting. The luminosity of the background
lighting can decrease during the period of use of the notebook. However, you can
set the brightness of your monitor individually.
Synchronising the display on the LCD screen and an external monitor
For more information, please refer to the chapter "Key combinations", Page 46
under "Display output, switch between".
Ambient Light Sensor
In the case of delivery with a Windows operating system, the screen brightness is regulated
by means of the ambient light sensor and depending on the particular light conditions. This
results in optimum readability and longer battery life at the same time.
30 Fujitsu
Working with the notebook
Using the device as a Tablet PC
You can execute commands as follows:
• using the pen (supplied with your device).
• using your fingers
Using fingers
You can execute certain commands by using your finger tip on the touchscreen of your device.
Everything which you can select or activate using your finger tip can
also be selected or activated using the pen.
Calibrate the Dual Digitizer for finger-based operation of the device.
Windows 7
Use the following steps to calibrate your touchscreen in Windows 7:
►Click on Start - Control Panel - Hardware and Sound.
►Under Tablet PC Settings,clickonCalibrate the screen for pen or touch input.
►On the Display tab page under Display options, tap on Calibrate and then
on Yes so that the program can make changes.
►Follow the instructions on the screen to calibrate the touchscreen.
Windows 8.1
To adapt the sensitivity of the monitor when using a pen or your finger:
►Swipe from the right-hand edge of the screen inwards, and then tap on Search.
or
►If using a mouse, point at the top right corner of the screen, move the mouse
pointer downwards, and then click on Search.
►Enter Calibrate in the search field and tap or click on Calibrate the screen for pen
or touch input to open the Tablet PC Settings.
►EnsurethatthemonitordisplayedintheDisplay field is the same as the
monitor that you wish to calibrate.
►Ta p o r c l i c k o n Calibrate and follow the instructions on the screen.
Fujitsu 31
Working with the notebook
Actions with one finger
Action Description
Selecting objects (click with the left mouse
button)
►With your finger, tap once brieflyonthe
object.
Starting programs (double-click with the left
mouse button)
►With your finger, tap twice briefly in quick
succssion on the program icon.
Moving objects/windows (drag with left mouse
button pressed, Drag & Drop)
►Place a finger directly on the object/window,
hold the finger pressed against the
touchscreen and move the desired
object/window.
Opening a context menu (click with the right
mouse button)
►Touch the desired item once with your finger
tip. Keep the finger tip pressed against the
touchscreen.
The context menu appears.
Moving the cursor ►Position one finger on the touchscreen and
move the finger in the desired direction.
32 Fujitsu
Working with the notebook
Actions with two fingers
Action Description
Scrolling
►Position two fingers on the touchscreen.
►Move your fingers upwards to scroll up.
or
►Move your fingers downwards to scroll
down.
Fujitsu 33
Working with the notebook
Action Description
Rotating
►Position the thumb on the touchscreen,
then turn the picture clockwise or
counter-clockwise using your index finger.
34 Fujitsu
Working with the notebook
Action Description
Increasing or decreasing the view
►Position two fingers on the touchscreen and
move them apart to increase the view.
or
►Position two fingers on the touchscreen and
move them together to decrease the view.
Blocking context-sensitive menus ►With two fingers, tap twice briefly in quick
succession on the touchscreen.
Fujitsu 35
Working with the notebook
Using the pen
3
1
2
4
1 = pen tip
2 = rocker button
3 = eyelet for optional pen tether
4 = eraser
You can use the pen on your notebook as an electronic writing implement to select
items and to navigate through menu options and programs. Programs that support
handwriting recognition also allow you to write characters directly on the screen with
the pen. You can also use the pen as a drawing tool.
The notebook pen is retained securely in its slot. This ensures that the pen cannot be lost,
regardless of whether you use the notebook as a Tablet PC or as a notebook, or carry it while
travelling. Always replace the pen in the slot when you are not using it. To eject the pen from
the slot, slide the pen ejection button on the front of the device towards the right.
A pen tether is available as an optional extra and you can use this to tie the
eyelet on the pen to the eyelet on the notebook.
36 Fujitsu
Working with the notebook
Only use the pen provided with your notebook. Do not use substitute pen tips
that were not specially designed for your notebook. Replace the pen tip if it
is worn. The warranty does not cover a scratched screen.
While writing, you should take care not to scratch the surface of the
display (e.g. with a wristwatch or bracelet).
The pen of your notebook is an electronic instrument which can be damaged
if used incorrectly. Handle the pen with care.
The following list contains guidelines for proper pen handling:
• Do not gesture with the pen.
• Do not use the pen as a pointer.
• Never use the pen on any other surface than the screen of your notebook.
• Do not try to turn the thumb grip on the pen. The grip is used to place
the pen in its slot or to remove it from its slot.
• Never store the pen with the tip bearing the weight of the pen (e.g. with the tip
down in a pen holder). If the pen is stored with the tip pointing down, this may
have an adverse effect on the pen mechanism (particularly at high temperatures).
In this case the pen tip may react as though it is constantly being pressed down.
To avoid damage, the pen should be stored in the slot when not in use.
Thepencanbeinfluenced by electromagnetic fields (cursor quivers or
jumps). There may be a few areas on the screen where the cursor quivers
slightly in spite of pressing the pen down firmly.
The screen responds to entries made with the tip of the finger or the pen when the tip
of the finger or the pen is in direct contact with the screen.
You can use the pen to perform all the functions for which you would otherwise use a mouse.
In addition, you can conveniently delete hand-written pen entries using the pen.
Handling Mouse Pen
Selecting menu
entries
Click with the left-hand mouse button. Touch the menu entry with the pen tip.
Starting programs Double click with the left-hand mouse
button.
Briefly touch the program icon twice
with the pen tip.
Moving
objects/windows
Drag with the left-hand mouse button
held pressed.
Place the pen tip directly on the
object/window. Hold the pen tip
pressed against the screen. Move the
desired object/window.
Opening a context
menu
Click with the right-hand mouse
button.
Touch the desired element with the
pen and leave the pen on the element
for a moment.
Moving the cursor -Place the pen tip directly on the
screen.
Fujitsu 37
Working with the notebook
Setting the pen
Operating system Menu
Windows 7 Under Hardware and Sound - Pen and Input Devices in the Control Panel
you can make various settings for the pen (assignment and function of
the pen button).
Windows 8.1 Under Windows 8.1 Desktop - Control Panel - Hardware and Sound - Pen
and Touch you can make various settings for the pen (assignment and
function of the pen button).
Calibrating the pen
You must calibrate your Tablet PC with the pen before firstusage,sothatit
recognises the pen as accurately as possible.
You should also always repeat the calibration if the co-ordination between the
pen and cursor movement deteriorates.
Operating system Menu
Windows 7 /
Windows 8.1 Desktop
To calibrate, call up the Hardware and Sound / Tablet PC Settings function
in the Control Panel. You need to calibrate both portrait and landscape
formats.
38 Fujitsu
Working with the notebook
Replacing the pen tip
With use, the pen tip may become worn or may pick up foreign particles that can scratch the screen.
A damaged or worn tip may not move freely, causing unpredictable results when using the pen.
If your pen exhibits these problems, you should replace the pen tip. To do this, use the supplied tool (1).
1
►To remove the tip, position the tip in the gap
between the two ends of the tool supplied.
►Pinch the two ends of the supplied tool
together so that the tip is firmly clasped,
then pull it from the barrel.
►To replace the tip, retrieve one of the
new tips that were supplied your pen.
Insert the flat end of the tip into the
barrel and exerting gentle pressure, push
it in until it is firmly in place.
If the tip is worn or damaged, discard it.
Fujitsu 39
Working with the notebook
Attach the pen tether (optional)
You can attach the pen with a pen tether (available as an option) to prevent
it being dropped or becoming lost.
►Secure one end of the pen tether to the pen and the other end of the pen tether to the notebook.
40 Fujitsu
Working with the notebook
Using the device as a notebook
Touchpad and touchpad buttons
Keep the touchpad clean. Protect it from dirt, liquids and grease.
TouchpadTouchpad
Never use the touchpad if your fingers are dirty.
Do not rest heavy objects (e.g. books) on the touchpad or the touchpad buttons.
1
2
1 = Touchpad
2 = Touchpad buttons
You can move the cursor using the touchpad.
The touchpad buttons allow you to select and execute commands. They correspond
to the buttons on a conventional mouse.
You can also deactivate the touchpad using a keyboard shortcut, so that you cannot
move the cursor unintentionally (see chapter "Key combinations", Page 46).
Moving the pointer
►Move your finger on the touchpad.
Touchpad
The pointer will move.
Selecting anitem
►Move the pointer to the item you wish to select.
Touchpad
►Ta p th e to uchpad once or press the left button once.
The item is selected.
Executing commands
►Move the pointer to the field you wish to select.
Tou chp ad
►Ta p t h e touchpad twice or press the left button twice.
The command is executed.
Fujitsu 41
Working with the notebook
Dragging items
►Select the desired item.
Touchpad
►Press and hold the left button and, with your finger on the touchpad, drag
the item to the desired position.
The item will be moved.
Switching the Touchpad on and off
You can switch the Touchpad on and off using a key combination,
see "Key combinations", Page 46.
42 Fujitsu
Working with the notebook
Keyboard
KeyboardNumerickeypadNumerickeypadButtons
The keyboard of your notebook is subject to continuous wear through normal
use. The key markings are especially prone to wear. The key markings are
liable to wear away over the life of the notebook.
The keyboard has been designed to provide all the functions of an enhanced keyboard.
Some enhanced keyboard functions are mapped with key combinations.
The following description of keys refers to Windows. Additional functions supported by the keys
are described in the relevant manuals supplied with your application programs.
The figure below shows how to access the different characters on keys with overlaid functions.
The example applies when the Caps Lock key has not been activated.
The illustrations shown below may differ from your actual device.
0
=
}
+
+
Num
Alt Gr
=
0}
=
0}
=
0}
=
0}
Fujitsu 43
Working with the notebook
Key Description
Backspace key
The Backspace key deletes the character to the left of the cursor.
BackspaceBac kspace
Tab key
The Tab key moves the cursor to the next tab stop.
Tabkey
Enter key (return)
The Enter key terminates a command line. The command you have entered
is executed when you press this key.
EnterkeyReturnEnterLinefeed
Caps Lock key
The Caps Lock key activates uppercase mode. In Caps Lock mode, all of
the characters you type appear in upper case. In the case of overlay keys,
the character printed on the upper left of the key will appear when that
key is pressed. To cancel the Caps Lock function, simply press the Caps
Lock key again.
ShiftkeyCaps Lock
Shift key
The Shift key causes uppercase characters to appear. In the case of overlay
keys, the character printed on the upper left of the key appears when that
keyispressed.
ShiftkeyShift
Fn button
The Fn key enables the special functions indicated on overlay keys (see
"Key combinations", Page 46).
Fnkey
Cursor keys
The cursor keys move the cursor in the direction of the arrow, i.e. up, down,
left, or right.
CursorkeysCursorcontrolkeys
Windows key
The Windows key switches between the start screen and the last used
application.
Windowskey
Menu key
The Menu key opens the menu for the active application.
44 Fujitsu
Working with the notebook
Virtual numeric keypad
NumerickeypadVirtualnumeric keypadNumLock
To provide the convenience of a numeric keypad, your keyboard is equipped with a virtual
numeric keypad. The special keys of the virtual numeric keypad are recognisable by the numbers
and symbols printed in the upper right corner of each key. If you have switched on the virtual
numeric keypad, you can output the characters shown on the upper right of the keys.
The keyboard layout shown below may differ from your actual device.
1 = Valid characters when the Num
key is not activated
2 = Valid characters when the Num
keyisactivated
Further information about the status indicators can be found in chapter "Status indicators", Page 20.
Country and keyboard settings
►Change the country and keyboard settings as described in the documentation for your operating
system.
Fujitsu 45
Working with the notebook
Key combinations
The key combinations described below apply when using Microsoft Windows
operating systems. Some of the following key combinations may not function in
other operating systems or with certain device drivers.
Key combinations are entered as follows:
►Press the first key in the combination and keep it pressed.
►While holding the first key down, press the other key or keys in the combination.
Combination Description
Activate/deactivate keyboard backlight
On backlit keyboards, this key combination activates or deactivates
the backlight.
Fn+F2Keybo ardbackgro undlight ing
Keyboardb ackgroundlig htin g
Switching the loudspeakers on/off
This key combination switches the integrated loudspeakers on and
off.
Fn+F3Louds peakerLoudspeaker
Enable/disable touchpad
This key combination enables and disables the touchpad.
Fn+F4TouchpadTouchpadbuttonsTouchpad
Switching the radio components on / off
This key combination enables or disables the radio components.
Fn+F5Radio components
Decrease screen brightness
This key combination decreases the brightness of the screen.
Fn+F6LCDscreenScreenbrightness
Increase screen brightness
This key combination increases the brightness of the screen.
Fn+F7Screen brightness
Decrease volume
This key combination reduces the volume of the internal
loudspeakers.
Fn+F8Volume
Increase volume
This key combination increases the volume of the internal
loudspeakers.
Fn+F9Volume
46 Fujitsu
Working with the notebook
Combination Description
Toggle output screen
Fn+F10Toggleoutputs creen
Use this key combination to select which screen(s) is/are used for
display if an external monitor is connected.
Screen output is possible:
• only on the notebook’s LCD screen
• only on the external monitor
• on the notebook’s LCD screen and the external monitor at the
same time.
Press the key combination several times to switch through all
possible settings.
It is possible to display video on two screens simultaneously,
regardless of the type and number of external screens connected.
If you have connected two external monitors to the port replicator,
the following display outputs are possible:
• only on the notebook’s LCD screen
• only on the external monitor (analogue)
• at the same time on the notebook’s LCD screen and on the
external monitor (analogue)
You cannot use the key combination to switch output at the same
time to both external monitors on the Port Replicator.
+
Ctrl CHalt current operation
This key combination can be used to halt an operation instantly
without clearing the keyboard buffer.
Back tab
This key combination moves the cursor back to the previous tab
stop.
Shift+TabTabback
Fujitsu 47
Working with the notebook
Tablet buttons
Your Tablet PC is equipped with three tablet buttons.
Symbol Description Functions
Windows key This key corresponds to the function of the Windows
Start key on the keyboard.
If the key is pressed in combination with the ON/OFF
switch, the function equates to the key combination Ctrl
+Alt +Del .
+Volume + button Increase the volume
–Volume - button Decrease the volume
48 Fujitsu
Working with the notebook
Webcam
Webcam
Depending on the software used, you can use your Webcam to take pictures,
record video clips or take part in web chats.
• The picture quality depends on the lighting conditions and the software being used.
• You can only operate the webcam with a particular application (e.g. an Internet telephony
program or a video conferencing program which supports a webcam).
• When using the webcam the notebook support must not wobble.
• The webcam automatically adjusts itself to the current light level. For this reason
the LCD screen may flicker while the light level is adjusted.
Further information on using the webcam and on the additional settings
which are possible for your webcam can be found in the help function
of the program which uses the webcam.
Fujitsu 49
Working with the notebook
Rechargeable battery
RechargeablebatteryBatteryLife,batteryRechargeablebatteryRechargeablebattery
When not plugged into a mains socket, the notebook runs on its built-in battery. You
can increase the life of the battery by caring for the battery properly. The average
battery life is around 500 charge/discharge cycles.
You can extend the battery life by taking advantage of the available energy saving functions.
Charging, caring for and maintaining the battery
BatteryBattery
The notebook battery can only be charged when the ambient temperature is
between 5°C / 41°F and max. 35°C / 95°F.
You can charge the battery by connecting the notebook to the mains adapter
(see "Mains adapter connecting", Page 17).
If the battery is running low you will hear a warning alarm. If you do not connect the mains adapter
within five minutes of the warning alarm described above, your notebook will automatically switch off.
monitoring the battery charging level
BatteryBatterystatusmeter
Windows also has a "Battery status meter" in the taskbar for monitoring the battery capacity. When
you place the mouse pointer on the battery symbol, the system displays the battery status.
Battery storage
BatteryBatterySelf-discharge,batteryChargingcapacity,ba ttery
Keep the battery pack in a dry environment at between 0°C / 32°F and 30°C / 86°F. The lower
the temperature at which the batteries are stored, the lower the rate of self-discharge.
If you will be storing batteries for a longer period (longer than two months),
the battery charge level should be approx. 30 %. To prevent exhaustive
discharge which would permanently damage the battery, check the level
of charge of the battery at regular intervals.
To be able to make use of the optimal charging capacity of the batteries, the battery
should be completely discharged and then fully recharged.
If you do not use the batteries for long periods, remove them from the
notebook. Never store the batteries in the device.
Removing and installing the battery
Only use batteries approved by Fujitsu for your notebook.
Never use force when fitting or removing a battery.
Make sure that no foreign bodies get into the battery connections.
Never store a battery for long periods in the discharged state. This
can make it impossible to recharge.
50 Fujitsu
Working with the notebook
Removing the battery
►Prepare for removal, see chapter "Preparing to remove components", Page 98.
2
1
3
►Slide the release button (1) in the direction of the arrow and hold it there.
►Slide the release button (2) in direction of the arrow.
►Lift the battery out of the battery compartment (3).
Fujitsu 51
Working with the notebook
Inserting battery
1
2
►Place the battery at the lower edge of the battery compartment.
►Push the battery into the battery compartment until you feel it engage (1).
►Slide the release button into its latch point (2).
►Complete the removal, see chapter "Finishing component removal", Page 104.
52 Fujitsu
Working with the notebook
Battery charge status indicator
You can check the charge status directly on the battery itself.
11
a
►Press the key (1).
The LED (a) lights up in one of the following colours:
LED indicator State of charge
Green The battery is between 50 % and 100 %
charged.
Orange The battery is between 11 % and 49 % charged.
Red The battery is between 1 % and 10 % charged.
LED not lit The battery is fully discharged.
Fujitsu 53
Working with the notebook
Module
ModulebayModules
The design of your notebook enables the flexible use of notebook batteries and drives. The
following modules can be operated in the module bay of your notebook:
• Second battery
• Optical drive
• Empty plug-in unit (save weight)
Only use modules designed for your notebook.
Do not use force when installing or removing the module.
Make sure that no foreign objects enter the module bay.
You can swap modules during operation. This means you do not
need to switch off the notebook.
To replace a module, simply click on the corresponding icon in the
task bar and then on Exit or
The module can now be removed without any further actions being necessary.
Removing a module
2
1
ModuleDriveWeigh tSaver
►Slide the release mechanism (1) in the direction of the arrow and hold.
►Pull the module (2) out of the module bay.
54 Fujitsu
Working with the notebook
Installing a module
►Place the module into the module bay so that the contacts enter first.
►Push the module into the module bay until you feel it locking into place.
Optical drive
Opticaldrive
This product contains a light emitting diode, classification according to IEC 60825
1:2007: LASER CLASS 1, and must therefore not be opened.
Handling data carriers
Handling
Observe the following guidelines when handling data carriers:
• Avoid touching the surface of a data carrier. Only handle data carriers by their edges.
• Always store data carriers in their cases. This will protect the data carrier against
being covered in dust, scratched or damaged in any other way.
• Protect your data carriers against dust, mechanical vibrations and direct sunlight.
• Avoid storing a data carrier in areas subject to high temperatures or humidity.
You can use data carriers with a diameter of 8 cm / 3.15" or 12 cm / 4.7" in the drive.
When using a data carrier of lesser quality, vibrations and reading errors may occur.
Fujitsu 55
Working with the notebook
CD/DVD indicator
CD/DVDindicator
The CD/DVD indicator flashes when a data carrier is inserted. The indicator goes out when
the drive is ready for reading. The indicator lights up when the drive is being accessed.
You may only remove the data carrier when the indicator is unlit.
If the CD/DVD indicator does not go out after a data carrier has been inserted, but
instead continues to flash, this means that the drive cannot access the data carrier.
Either the data carrier is damaged or dirty or you are using a data
carrier that the drive cannot read.
Inserting or removing a data carrier
InsertingRemoving
The notebook must be switched on.
2
1
►Push the insert/eject button (1).
The drive tray will open.
►Gently pull the drive tray (2) completely out.
►Place the data carrier in the drive tray with
the printed side facing upwards.
or
►Remove a data carrier that has
been inserted.
►Push in the drive tray until you
feel it lock into place.
56 Fujitsu
Working with the notebook
Manual removal (emergency removal)
CD/DVD:ManualremovalofdatacarrierEmergencyrem ovalo fdata carrier
In the event of a power failure or damage to the drive, you can remove the data carrier manually.
1
2
►Switch your notebook off.
►Push a pen or a piece of wire (such as a
paperclip) firmly into the opening (1).
The drive tray is ejected. You can now pull
the drive tray (2) out of the drive.
Fujitsu 57
Working with the notebook
Using the power-management features
PowerPowerBattery
The notebook uses less power when the available power-management features are used. You
will then be able to work longer when using the battery before having to recharge it.
Power efficiency is increased and environmental pollution reduced. By
choosing the best power options, you can make significant savings and
at the same time help protect the environment.
When you close the LCD screen, depending on the setting in Windows, the
notebook automatically enters a power saving mode.
We recommend the following settings:
Function On external power On battery power
Turn off monitor After 10 minutes After 5 minutes
Turn off hard disk(s) After 15 minutes After 10 minutes
Energy saving (S3) After 20 minutes After 15 minutes
Hibernate mode (S4) After 1 hour After 30 minutes
►Select the power management functions in your Control Panel.
►Select the Screen Saver in your Control Panel.
or
►Right-click on the desktop. Activate the screen saver by clicking on Personalize – Change
Screen Saver.
If you need further information about an option, you can get help with most
settings by pressing F1 to open the Microsoft Help.
When the notebook is in power-saving mode, the following must be remembered:
During power saving mode, open files are held in the main memory
orinaswapfile on the hard disk.
Never turn off your notebook while it is in a power saving mode. If the built-in battery is
nearly empty, close the open files and do not go into power saving mode.
If you do not intend to use your notebook for a long period of time:
►Exit power saving mode if necessary via the mouse or keyboard or by switching on the
notebook.
►Close all opened programs and completely shut down the notebook.
58 Fujitsu
Working with the notebook
Memory cards
Slot
Your notebook is equipped with an integrated memory card reader.
Observe the manufacturer’s instructions when handling the memory cards.
Memorycard
Supported formats
The memory card reader supports the following format:
• Secure Digital (SDTM card)
• SDHC
•SDXC
Inserting the memory card
►Carefully slide the memory card into the
slot. The label should be facing upward. Do
not apply excessive force, as otherwise the
delicate contact surfaces could be damaged.
Memorycard
Depending on the particular type
used, the memory card may protrude
slightly from the slot.
Removing thememorycard
Memorycard
In order to protect your data, always follow the correct procedure for removing
the card (see the documentation for your operating system).
1
2
►Press on the memory card (1).
Memorycard
The memory card is released and
can now be removed.
►Pull the memory card out of the slot (2).
Fujitsu 59
Working with the notebook
Loudspeakers and microphones
MicrophoneLoudspeakersBass loudspeaker (subwoofer)Volume con trol
You will find information about the exact position of speakers and microphones
in chapter "Ports and controls", Page 9.
Please refer to chapter "Key combinations", Page 46 for information on setting the volume
and also enabling/disabling the loudspeakers using key combinations.
If you attach an external microphone, the built-in microphone is disabled.
When you connect headphones or external speakers, the built-in speakers are disabled.
Information on connecting headphones and a microphone can be found
in "Connecting external devices", Page 91.
60 Fujitsu
Working with the notebook
SIM card
A SIM card (Subscriber Identity Module) is a chip card which is inserted in a mobile phone or
notebook and, together with an integrated UMTS/LTE module, enables access to a mobile network.
When handling SIM cards, follow the instructions supplied by the provider.
Inserting the SIM card
►Remove the battery, see "Removing the battery", Page 51.
1
3
2
►Pull the SIM card holder out of the slot (1).
►Insert the SIM card (2) into the SIM
card holder as shown in the diagram
on the SIM card holder.
►Push the SIM card holder back
into the slot (3).
►Install the battery again, see "Inserting battery", Page 52.
Removing the SIM card
►Remove the battery, see "Removing the battery", Page 51.
1
3
2
►Pull the SIM card holder out of the slot (1).
►Remove the SIM card from the SIM
card holder (2).
►Push the SIM card holder back
into the slot (3).
►Install the battery again, see "Inserting battery", Page 52.
Fujitsu 61
Working with the notebook
Optional Wireless LAN / Bluetooth / UMTS /
LTE wireless components
The installation of radio components not approved by Fujitsu will invalidate
the certifications issued for this device.
Depending on the device configuration you ordered, your device will be
equipped with Wireless LAN, Bluetooth, UMTS or LTE.
Switching the wireless components on and off
►Press the key combination Fn +F5 to start the WirelessSelector.
WirelessLANWirelessLANBluetoothBluetooth
The wireless component indicator will illuminate when one or more wireless
components are switched on.
The Bluetooth and UMTS modules and the wireless LAN transmission unit (antenna)
will also be switched off when you switch off the wireless components.
Pay attention to the additional safety notes for devices with radio
components provided in the "Safety" manual.
Details on using a Wireless LAN can be found in the online help system
included in the Wireless LAN software.
You can obtain more information on UMTS from your service provider.
Setting up WLAN access
• Requirement: A WLAN must be available and you must have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating system.
62 Fujitsu
Working with the notebook
Access via UMTS / LTE
If you ordered an integrated UMTS / LTE module with your system, you can enjoy optimum
reception and maximum energy efficiency without awkward cables or antennas. The
optional UMTS / LTE module is ready for use straight away.
If you did not order a UMTS / LTE module, you can purchase the accessories for UMTS /
LTE reception from your retailer or your Fujitsu Technology Solutions dealer.
You will find information on establishing the connection with the UMTS / LTE network
in the documentation for the hardware used.
Your device can connect to the Internet via UMTS / LTE. To do this, use one
of the following types of connection:
• Integrated UMTS / LTE module (availability dependent on your model variant)
• a USB dongle (a USB stick with your mobile phone provider’s SIM card)
• a mobile end-device (e.g. mobile phone with Bluetooth or cable connection)
• UMTS ExpressCard (fits into the ExpressCard slot on your device)
UMTS/LTE antenna
1
►To improve the signal strength of the
UMTS/LTE, fold out the UMTS/LTE antenna
in the direction of the arrow (1).
UMTSUMTS
Fujitsu 63
Working with the notebook
Ethernet and LAN
EthernetLAN
The internal network module of your notebook supports Ethernet LAN. You can use it to
establish a connection to a local network (LAN = Local Area Network).
2
1
►Connect the network cable to the LAN
port of the notebook (1).
►Connect the network cable to your
network connection (2).
Your network administrator can help you to configure and use the LAN connections.
The network cable is not included in the delivery scope. This type of
cable can be obtained from a specialist dealer.
64 Fujitsu
Working with the notebook
Your Port Replicator (optional)
Your Port Replicator is a device that enables you to quickly connect your notebook
to your peripherals, such as a monitor, printer etc.
The features offered by the Port Replicator include standard ports for
monitor, audio, mouse and keyboard.
You need only dock the notebook in order to use your peripheral devices.
Ports on the Port Replicator
PortReplicatorPorts
11
1
2
3
4
6
7
89
12
10
5
1 = Security Lock device
2 = USB ports (USB 3.0)
3 = eSATA port
4 = LAN port
5 = Display ports
6 = DVI-D monitor port
7 = VGA monitor port
8 = DC jack socket (DC IN)
9 = Headphone and microphone port
10 = ON/OFF button
11 = Connector on the port replicator for the
docking port on the bottom of the notebook
12 = Release
The DVI port and the neighbouring DisplayPort cannot be used at the same time.
The DVI port and the neighbouring DisplayPort cannot be used if an
HDMI device is connected to the notebook.
Fujitsu 65
Working with the notebook
Setting up the port replicator
Select a suitable location for the Port Replicator before setting it up.
Follow the instructions below when doing so:
• Never place the port replicator on a soft surface (e.g. carpeting, upholstered furniture, bed).
This can block the air vents of the notebook and cause overheating and damage.
• Place the port replicator on a stable, flat and non-slip surface. Please note that the
port replicator’s rubber feet may mark certain types of surface.
• Never place the port replicator and the mains adapter on a heat-sensitive surface.
• Do not expose the port replicator to extreme environmental conditions.
Protect the port replicator from dust, humidity and heat.
Connecting the notebook to the Port Replicator
The mains adapter must be connected to the Port Replicator when the
notebook is connected to the Port Replicator.
We recommend that the notebook is not operated with the LCD screen closed when
the notebook is connected to the Port Replicator. The resulting overheating can
cause reduced performance and increased activity of the integrated fan.
PortReplicator
►Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook.
1
►Position the notebook so that it is in line with the back edge of the Port Replicator.
►Place the notebook onto the Port Replicator (1) and ensure that it locks into place correctly.
66 Fujitsu
Working with the notebook
Connecting the mains adapter to the Port Replicator
3
1
2
►Connect the power cable to the
mains adapter (1).
►Plug the power cable into the mains
socket (2).
►Connect the mains adapter cable to the DC
jack (DC IN) of the Port Replicator (3).
When the notebook is connected to a Port Replicator, the operating system creates
a hardware profile for the "Docked" mode. In this profile, for example, the setting is
saved as to which monitor was last used for output. This profile will be loaded, as
soon as the notebook is connected to a Port Replicator of the same type.
Switching on the notebook via the port replicator
►Press the ON/OFF switch on the port
replicator to switch the notebook on.
The power-on indicator of the Port
Replicator lights up.
Fujitsu 67
Working with the notebook
Disconnecting the notebook from the Port Replicator
Windows 7:
Problems may occur if the notebook is removed from the Port Replicator during
operation. We recommend that the notebook is switched off or that the appropriate
undocking function provided by the operating system is executed.
2
1
►Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch.
►Lift off the notebook (2).
68 Fujitsu
Security functions
Security functions
Securityfunctions
Your notebook has several security features that you can use to secure your
system from unauthorised access.
This chapter explains how to use each function, and what the benefits are.
Please remember that in some cases, for example, forgetting your password,
you may be locked out and unable to access your data. Therefore,
please note the following information:
• Make regular backups to external data carriers such as external hard
drives, CDs, DVDs or Blu-ray Discs.
• Some security functions need you to choose passwords. Make a note
of the passwords and keeptheminasafeplace.
If you forget your passwords you will need to contact the our Service
Desk. Deletion or resetting of passwords is not covered by your warranty
and a charge will be made for assistance.
Fujitsu 69
Security functions
Brief overview of security functions
Detailed information about the security equipment of your device can be found in
the "Professional Notebook" manual, on the "Drivers & Utilities" CD/DVD or on
the Internet at "http://www.fujitsu.com/fts/support/index.html".
Security functions Type of protection Preparation
Security Lock Mechanical Fit and lock the Kensington
Lock Cable (accessory).
Fingerprint sensor (depending
on the device)
Biometric Install the supplied fingerprint
software.
BIOS password protection Password protection for BIOS
Setup, operating system and
hard disk with supervisor and
user password. The passwords
consist of a maximum of eight
alphanumeric characters.
Specify at least one supervisor
password in the BIOS Setup
and activate the password
protection for the operating
system and hard disk as
desired.
Boot from removable media Prevents unauthorised booting
of an operating system from
external media (e.g. USB stick,
USB CD-ROM drive etc.).
In the BIOS Setup, go to the
Security menu and edit the
option Boot from Removable
Media.
Owner Information Overlay service desk or owner
information during the boot
process.
In the BIOS Setup, go to the
Security menu and edit the
option Owner Information.
System Lock (device
dependent)
The BIOS and the system can
only be started with SmartCard
and PIN.
Initialise the SmartCard in the
BIOS.
SmartCard reader (device
dependent)
PIN and SmartCard protection
for operating system
To us e the S m artCard reader
functions, install the supplied
(or other suitable) software.
Trusted Platform Module
(device dependent)
Identification and authentication
of the notebook
Define a supervisor password
in the BIOS Setup and enable
the TPM (Security Chip).
70 Fujitsu
Security functions
Configuring the fingerprint sensor
Fingerprintsens orFingerprintsens or
Whether or not your device has a fingerprint sensor depends on the
device configuration you have ordered.
The fingerprint sensor can record an image of a fingerprint. With additional fingerprint
software, this image can be processed and used instead of a password.
1
►You must install the fingerprint software
in order to be able to use the
fingerprint sensor (1).
Using the Security Lock
Your device comes with a Security Lock device for the Kensington Lock Cable. You can
use the Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from
theft. The Kensington Lock Cable is available as an accessory.
Fujitsu recommends the use of a combination lock.
►Fit the Kensington Lock Cable on the
device on your notebook.
UsingtheKensingtonLockCableSecurity LockMechanical backupAnti-theftprot ection
Attach another Kensington Lock Cable to your Port Replicator to protect
your Port Replicator from theft as well.
Fujitsu 71
Security functions
Configuring password protection in BIOS Setup Utility
Before using the various options for password protection in the BIOS Setup utility
to increase data security, please observe the following:
Make a note of the passwords and keep them in a safe place. If you forget your
supervisor password you will not be able to access your notebook. Deletion of the
password is not covered by your warranty and a charge will be made for assistance.
Password prote ction
Your password can be up to eight characters long and contain letters and numbers.
No distinction is made between uppercase and lowercase.
Protecting BIOS Setup Utility (supervisor and user password)
If you have opened these operating instructions on the screen, we
recommend that you print them out. You cannot call the instructions onto
the screen while you are setting up the password.
BIOSSetupUtility
The supervisor password and the user password both prevent unauthorised use of the BIOS Setup
Utility. With the aid of the supervisor password you can access all of the functions of the BIOS
Setup Utility, while the user password will only give you access to some of the functions. You
can only set up a user password if a supervisor password has already been assigned.
Please refer to section "Settings in BIOS Setup Utility", Page 105 for a description
of how to call up and operate the BIOS-Setup-Utility.
Assigning the supervisor and user passwords
►Start the BIOS Setup Utility and go to the Security menu.
►Select the Set Supervisor Password field and press the Enter key.
With Enter new Password: you are asked to enter a password.
►Enter the password and press the Enter key.
Confirm new Password requires you to confirm the password.
►Enter the password again and press the Enter key.
Changes have been saved is a confirmation that the new password has been saved.
►To set the user password, select Set User Password and proceed exactly as
when configuring the supervisor password.
If you do not want to change any other settings, you can exit BIOS Setup Utility.
►In the Exit menu, select the option Save Changes & Exit.
►Select Yes and press the Enter key.
PasswordSupervisor passwordUserpassword
The notebook is then rebooted and the new password comes into effect. It will now be necessary
to first enter your supervisor or user password in order to open the BIOS Setup Utility.Please
note that the user password only provides access to a few of the BIOS settings.
72 Fujitsu
Security functions
Changing the supervisor or user password
You can only change the supervisor password when you have logged into the
BIOS Setup Utility with the supervisor password.
PasswordSupervisorpasswordUserpassword
►Call the BIOS Setup Utility and go to the Security menu.
►When changing the password, proceed exactly as for password assignment.
Removing passwords
To remove a password (without setting a new password) perform the following steps:
PasswordSupervisorpasswordUserpassword
►Start the BIOS Setup Utility and go to the Security menu.
►Highlight the Set Supervisor Password or Set User Password field and press the Enter key.
You will be requested to enter the current password by the Enter Current Password prompt.
You will be requested to enter a new password by the Enter New Password prompt.
►Press the Enter key twice.
►In the Exit menu, select the option Save Changes & Exit.
►Select Yes and press the Enter key.
The notebook will now reboot with the password removed.
Removing the supervisor password simultaneously deactivates the user password.
Password protection for booting of the operating system
With the supervisor password you have set in the BIOS Setup Utility (see
section "Assigning the supervisor and user passwords", Page 72), you can
also prevent starting of the operating system.
Operating system
Activating system protection
►Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
►Select the PasswordonBootoption and press the Enter key.
►Select the desired option (Disabled,First Boot or Every Boot) and press the Enter key
►Select the Save Changes & Exit option under Exit.
The notebook reboots. You will be prompted to enter your password (the supervisor password).
Deactivating system protection
►Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
►Select the PasswordonBootoption and press the Enter key.
►Select the Disabled option and press the Enter key.
If you do not want to change any other settings, you can exit BIOS Setup Utility.
►Select the Save Changes & Exit option under Exit.
The notebook will reboot. The system is no longer password-protected.
Fujitsu 73
Security functions
Password protection for the hard disk
If a supervisor password has been assigned, a password for the hard disk can
also be set in the Hard Disk Security menu.
The hard disk is protected by this password. Data on this hard disk can only be read
into another system if the correct password has been entered.
SmartCard reader
Securityfunctions,Securityfunctions
SmartCards are not supplied as standard equipment. You can use all SmartCards that comply with
the ISO standard 7816-1, -2 or -3. These SmartCards are available from various manufacturers.
With the appropriate software you can use your SmartCard as an alternative to password protection,
but also as a digital signature, for encrypting your e-mails or for home banking.
We recommend that you always use two SmartCards. Always keep one of the SmartCards
in a safe place if you are carrying the other SmartCard with you.
In order to be able to take advantage of all the security features of your notebook,
you will need a CardOS SmartCard from Fujitsu.
The SmartCard can only be used with a PIN, offering maximum protection even if
you lose the SmartCard. In order to maximise your security, the CardOS SmartCard
is disabled if three incorrect attempts are made to enter the PIN.
When you use the CardOS SmartCard for the first time, you will either need to enter the
preset PIN "12345678" or the PIN given to you by your systems administrator.
Inserting the SmartCard
Do not use force when inserting and removing the SmartCard.
Make sure that foreign objects do not fall into the SmartCard reader.
►Slide the SmartCard into the SmartCard
reader with the chip facing upwards (on
some variants it faces down) and to the front.
74 Fujitsu
Security functions
SmartCard SystemLock (optional)
With SystemLock enabled, the device can only be started using an initialised SmartCard (SICRYPT,
CardOS or Fujitsu) and a personal identification number (PIN). The SmartCard and PIN are
checked during system booting in the BIOS, i.e. before the operating system is started.
SmartCard SystemLock
Item Specific Help SmartCard SystemLock Not Installed
Install Single PC:
[Enter]
Install Group PC: [Enter]
Installs the security
for this PC, and
creates a new
SystemLock Admin
SmartCard dedicated to
this PC.
SmartCard data will be
overwritten.
A correct SmartCard is
required for a
permanent installation
SmartCardSwitchingon thesystem
All new SmartCards have a preset PIN (Personal Identification Number)
and PUK (Personal Unblocking Key).
On SICRYPT and CardOS SmartCards, the value 12345678 is preset
for the PIN and the PUK.
On Fujitsu cards, the value 0000 is preset for the PIN and the value
administrator is preset for the PUK. For security reasons, we recommend
that you change both PIN and PUK without fail.
Additional software (e.g. Smarty) is required so that the system can also check that
the correct SmartCard is inserted while the system is running.
For information on how to uninstall SystemLock, please refer to "Uninstall SystemLock".
A system which was protected using SystemLock can no longer be released.
Always create a backup copy of the SmartCard which was used.
Fujitsu 75
Security functions
Access rights of SmartCards
SmartCardSmart CardSmartCard
A new SmartCard initially only has a preset PIN and PUK. Access rights and the customised
PIN and PUK are not assigned until the SmartCard is initialised. The SmartCard type
depends on the access rights assigned to the card, as described below:
• User SmartCard: starting the system, changing the PIN
• SuperUser SmartCard: starting the system, changes in BIOS Setup, changing the PIN
• Service SmartCard: changes in BIOS-Setup, operating system boot-up not possible
• Admin SmartCard: starting the system, changes in BIOS Setup, changing the PIN,
uninstalling SystemLock, initialising SmartCards, blocking SmartCards
The following table shows an overview of the rights granted with each type of
SmartCard when a PIN or PUK is entered:
User
SmartCard
SuperUser
SmartCard
Service
SmartCard
Admin
SmartCard
PIN PUK PIN PUK PIN PUK PIN PUK
Start-up system xx x
Run BIOS Setup xxx
Change own PIN xx xxx
Unblocking own
blocked SmartCard
x* x* x* x
Unblocking all blocked
SmartCards
x
Generating user cards x
Uninstall SystemLock x
*BIOS Setup setting (Unblock own SmartCard)
Usually there is always one Admin SmartCard and at least one User or SuperUser
SmartCard that will allow a system to be operated.
76 Fujitsu
Security functions
SmartCard user groups
SmartCard
User groups can be set up using SystemLock. This enables several systems to be started with one
SmartCard. A user group consists of at least two systems. Each user that is allowed to start the
systems is provided with one SmartCard. The user can start any of the systems using this SmartCard.
Basic information on setting up user groups
When installing SystemLock,thefirst PC in the user group is set up as a "Single PC". The
Admin SmartCard generated during this process is used to set up the user group. SystemLock
sets up each additional device as a "Group PC" during installation. The existing Admin
SmartCard is inserted, information is read in and the device is added to the user group.
The Admin SmartCard determines which user group the device belongs to.
If you use FSC-CardOS SmartCards, SystemLock can be administered via the Windows
program "SystemLock Admin". "SystemLock Admin" allows you to conveniently manage
SystemLock at the operating system level, create SystemLock Organisation Units and Groups,
generate SmartCards for these Organisation Units or Groups, assign access rights for user
cards at various levels and restore access rights using remote access. You can also change
the SmartCard’s PIN or PUK for yourself and other users and reactivate blocked cards.
For a detailed description, see the "SystemLock Admin" Help manual.
Admin Card
PC1
Select System -
mode: F3
PC4 3
PC 1
Select System -
mode: F1
Smart Card
PC1
Admin Card
PC1
1
2
PC2 Admin Card
PC1
Select System -
mode: F3
3
PC3 Admin Card
PC1
3
User SmartCards or SuperUser SmartCards must still be generated using SystemLock so that
users can access the systems within the user group. Using a User SmartCard or SuperUser
SmartCard a user can log on to each system within the user group.
Fujitsu 77
Security functions
Installing SystemLock
InstallingS ystemLock
During initial installation, the first SmartCard becomes the Admin SmartCard. Together with
the PUK, it has all access rights, and should therefore be kept in a safe place. It can only
be used by the authorised user (administrator), e.g. to initialise user cards.
You need an Admin SmartCard if you want to set up a user group. You use the
Admin SmartCard to add further systems to the user group.
Setting up the first system in a user group or a stand-alone
system for use with SystemLock
Usergroups
►Start the device and call up BIOS Setup.
►From the Security menu, choose the option SmartCard SystemLock.
The following SmartCard SystemLock menu will be displayed:
Security
SmartCard SystemLock Item Specific Help
SmartCard SystemLock Not Installed
Install Single PC [Enter]
Install Group PC [Enter]
Installs the security
from a SystemLock Admin
SmartCard into this PC
without modifying any
data on the SmartCard.
A correct SmartCard is
required for a
permanent installation.
Enter PIN: [ ]
►Insert a new SmartCard in the reader and press Enter.
78 Fujitsu
Security functions
New SmartCards have a preset PUK (see above).
if you want to re-initialise a previously initialised SmartCard, you will need
to know the PUK which was assigned to it.
►Enter the PUK.
When the following appears:
•ACCESS DENIED = You have entered an invalid PUK. After six failed attempts,
the SmartCard will be blocked and can no longer be used.
►Enter a new PIN at the following prompt:
Enter new PIN:
Confirm new PIN:
A number with 4 to 8 digits is acceptable for the new PUK. For security
reasons, we recommend that you change the PUK for every SmartCard,
and use an 8-digit number each time.
►Re-enter the new PIN to confirm.
When the following appears:
•PIN/PUK do not match = You have confirmed the PIN incorrectly. You will be
requested to re-enter the new PIN and reconfirm.
Please wait a few seconds after confirming the new PIN: SystemLock is being installed.
The following message will be displayed if installation is successful:
Setup Notice
Changes have been saved
[Continue]
►Now press the Enter key. The SystemLock administration menu will be displayed:
Fujitsu 79
Security functions
Security
SmartCard SystemLock Item Specific Help
SmartCard SystemLock Installed
Uninstall: [Enter]
BIOS Recovery: [Allowed]
SmartCard and Pin [Always required]
SmartCard Initialization
Admin SmartCard [Enter]
SuperUser SmartCard: [Enter]
User SmartCard: [Enter]
Service SmartCard: [Enter]
SmartCard Configuration
Change PIN: [Enter]
Change PUK: [Enter]
Unblock SmartCard: [Enter]
Allows to deactivate
The smartcard security.
ATTENTION:
Always check the BIOS
password settings after
uninstalling
SystemLock.
NOTICE:
Reinstalling a SinglePC
implies re-initializing
all of your smartcards
►For security reasons, the preset PUK should always be changed before removing
the new SmartCard. To do this, under SmartCard Configuration, select the option
Change PUK, press the Enter key and input the new PUK.
►First enter the preset PUK.
Enter the PUK:
New SmartCards have a preset PUK (see above).
You will need to know the PUK assigned to the SmartCard if you want to
re-initialise a previously initialised SmartCard.
►Enter the PUK.
When the following appears:
•ACCESS DENIED = You have entered an invalid PUK. After six failed attempts,
the SmartCard will be blocked and can no longer be used.
►Enter the new PUK as follows.
Enter new PUK:
Confirm new PUK:
A number with 4 to 8 digits is acceptable for the new PUK. For security
reasons, we recommend that you change the PUK for every SmartCard,
and use an 8-digit number each time.
►Re-enter the new PUK to confirm.
When the following appears:
•PIN/PUK do not match = You have confirmed the PUK incorrectly. You will then
be requested to re-enter and reconfirm the new PUK.
F5,function key
F6,function key
F7,function key
F8,function key
F9,function key
F10,functionkey
Instructions on how to initialise additional SmartCards can be found in Section
"Carrying out administrator functions", Page 84.
80 Fujitsu
Security functions
►If you do not want to initialise any further SmartCards, press Esc and remove the Admin
SmartCard. NEVER write the PIN or PUK on the SmartCard under any circumstances!
Keep the SmartCard and PIN/PUK in a safe place and protect
them from unauthorised access.
Fujitsu 81
Security functions
Adding a system to a user group
SystemLock2
►Start the device.
►Call up BIOS Setup and select the SmartCard SystemLock page from the Security menu.
The following SmartCard SystemLock menu will be displayed:
Security
SmartCard SystemLock Item Specific Help
SmartCard SystemLock Not Installed
Install Single PC [Enter]
Install Group PC [Enter]
Installs the security
from a SystemLock Admin
SmartCard into this PC
without modifying any
data on the SmartCard.
A correct SmartCard is
required for a
permanent installation.
Enter PIN: [ ]
►Insert the Admin SmartCard for the user group.
Enter PIN:
►Enter the PIN.
When the following appears:
•ACCESS DENIED = You have confirmed the PIN incorrectly. You are then requested to
enter and confirm the new PIN again. After three failed attempts, the SmartCard will
be blocked and can then only be activated again by entering the PUK.
Enter the PUK:
82 Fujitsu
Security functions
►Enter the PUK.
When the following appears:
•ACCESS DENIED = You have entered an invalid PUK. After six failed attempts,
the SmartCard will be blocked and can no longer be used.
Please wait a few seconds after entering the PIN and PUK: SystemLock is being installed.
The following message will be displayed if installation is successful:
Setup Notice
Changes have been saved
[Continue]
Now press the Enter key. The SystemLock administration menu will be displayed:
Security
SmartCard SystemLock Item Specific Help
SmartCard SystemLock Installed
Uninstall: [Enter]
BIOS Recovery: [Allowed]
SmartCard and Pin [Always required]
SmartCard Initialization
Admin SmartCard [Enter]
SuperUser SmartCard: [Enter]
User SmartCard: [Enter]
Service SmartCard: [Enter]
SmartCard Configuration
Change PIN: [Enter]
Change PUK: [Enter]
Unblock SmartCard: [Enter]
Allows to deactivate
The smartcard security.
ATTENTION:
Always check the BIOS
password settings after
uninstalling
SystemLock.
NOTICE:
Reinstalling a SinglePC
implies re-initializing
all of your smartcards
F5,function keyF6,function keyF8,function keyF9,func tion key
Generate a user card for the device as described in Section "Carrying out
administrator functions", Page 84.
►If you do not want to initialise any further SmartCards, press Esc and
remove the Admin SmartCard.
Fujitsu 83
Security functions
Carrying out administrator functions
If you have an internal SmartCard reader, you can switch on the device by inserting the SmartCard.
If you switch on the device with the On/Off switch then the following message appears:
SystemLock
Insert a SmartCard.
Administrator functions
►Insert the Admin SmartCard. The following message will be displayed:
Enter your PIN:
You can now select:
F2=Setup, F3=Change PIN, F4=Administration
►Press the F4 function key. The following message will be displayed:
Enter the PUK:
►If you have entered the PUK correctly, you receive the following message:
PUK OK.
Initialize another SmartCard or press ESC to abort?
F5=User, F6=SuperUser, F7=Admin, F8=Service, F9=Unblock SmartCard, F10=Uninstall
F5 : Normal User SmartCard ("System" access rights):
Only allows system start-up, does not allow changes in BIOS Setup.
F6 : Extended User SmartCard ("System and Setup" access rights):
Allows system start-up and changes in BIOS Setup.
F7 : Admin SmartCard ("Admin" access rights):
Allows generation of further Admin SmartCards.
F8 : Service SmartCard ("Service" access rights):
Only allows changes in BIOS Setup.
F9 : Re-activate a blocked User SmartCard.
Enables a new user PIN entry.
F10 : Uninstalls SystemLock.
Additional SmartCards should be produced either as Normal User SmartCards
("System") or as Extended User SmartCards ("System and Setup"). These
then have restricted access to the device.
►Press the desired function key. The following message will be displayed:
Remove the SmartCard.
►Remove the Admin SmartCard.
Insert a SmartCard.
Keep the Admin SmartCard in a safe place and protect it from unauthorised access.
84 Fujitsu
Security functions
►Insert the next SmartCard. It will be initialised as required.
The following message will be displayed:
Remove the SmartCard.
Always change the PIN and PUK for all further SmartCards. The PUK
is used to re-activate a blocked SmartCard.
►Remove the User SmartCard and label it, e.g. with the name of the user. But NEVER
write the PIN on the SmartCard under any circumstances!
Fujitsu 85
Security functions
Remote Access Enabling – F4
Requirement:
The device is centrally administered as part of an Organisation Unit and is registered in a SystemLock
Admin database. The SmartCard used for the group installation must have been initialised beforehand
using the SystemLock Admin.EXE Windows program (see "SmartCard user groups", Page 77).
In order to enable "remote" access to a device for a user, or to grant one-time "remote"
access to a device for a guest or service technician, proceed as follows:
►Start the device.
The prompt to Insert a SmartCard will appear.
►Press the F4 key.
The following dialogue box will appear:
SmartCard SystemLock
Org Unit:
PC Group:
I-CODE 1:
I-CODE 2:
Company Department 1
Group 1
0123456789ABCDEF
0123456789ABCDEF
The user must then contact the administrator or the administration hotline and
inform them of the data and codes displayed .
The administrator then specifies the type of the once-only access rights:
User
access
The user can boot the system once.
Service
access
The user has one-time access to the BIOS for service purposes, without
access to the SystemLock functions.
Admin
access
The user has access to the BIOS and the SystemLock functions, e.g. for
activating the device when the associated SmartCard has been lost.
An activation code will be generated that depends on the access rights granted;
this will be given to the user by the Hotline.
The user must now press the Enter key on the PC to be activated, enter the first half (Code
1) of the activation code and confirm the entry by pressing Enter. The dialogue box for
entering the second half (Code 2) of the activation code will appear. If an incorrect entry
is made, there is no limit to the number of times the process can be repeated.
When all 32 characters of the activation code have been correctly entered, the
device will boot with the rights assigned by the administrator, in the same way
as if a corresponding SmartCard were inserted.
The activation code can only be used once to start the device; it immediately becomes
invalid when the device boots. If you wish to switch off the device and start it again
without your SmartCard, the procedure described above must be repeated each time.
86 Fujitsu
Security functions
Switch on the device using SystemLock
If you have an internal SmartCard reader, you can switch on the device by inserting the SmartCard.
If you switch on the device with the On/Off switch then the following message appears:
Insert a SmartCard.
SystemLock
►Insert your SmartCard.
Enter PIN:
►Enter your PIN.
When the following appears:
ACCESS DENIED = You have entered an incorrect PIN. After three failed attempts, the
SmartCard will be blocked and can only be enabled again by entering the PUK.
Depending on the rights assigned to your SmartCard, you can select the following
functions when this message is displayed on the screen:
F2=Setup, F3=Change PIN
If your SmartCard has the appropriate rights, you can:
F2,function keyF3,function key
F2 : start BIOS Setup.
F3 : change PIN.
If you do not select a function, the system will boot up.
Start BIOS Setup F2
A SmartCard with the appropriate rights must be inserted (SuperUser, Service or Admin).
Changing PIN
It is possible to change the PIN for any initialised SmartCard.
►Press the function key F3 .
►Enter the old PIN.
►Enter the new PIN.
A number with 4 to 8-digits is acceptable for the new PIN. For security
reasons, we recommend that you change the PIN for every SmartCard,
and use an 8-digit number each time.
►Confirm the new PIN.
Uninstall SystemLock
►Start the device.
Uninstalling
►Follow the instructions given in section "Carrying out administrator functions",
Page 84. Select "Uninstall" to uninstall SystemLock. You can now use the
device again without the need for a SmartCard.
Fujitsu 87
Security functions
Error messages
Errormessages
In this chapter you will find the error messages which are generated by the
mainboard and the SmartCard reader.
Error Cause
Boot access denied TheSmartCardhasnoaccessrightstothesystem.
Check your
SmartCard
The SmartCard is either inserted incorrectly or it is not a suitable SystemLock
SmartCard.
SmartCard reader
FA I L U R E
An error has occurred on the serial port to the SmartCard reader. If this error
occurs frequently, the connection between the SmartCard reader and the
mainboard must be checked, or the SmartCard reader must be replaced.
While the error is present, access to the system is blocked.
Non-authorised
SmartCard
The SmartCard cannot be used on this device. The SmartCard has been
configured for a different device.
SystemLock
installation
FA I L E D :
An error occurred while installing SystemLock. Do not switch off the device,
insert the "BIOS Flash diskette" instead.
Perform a BIOS update and try the installation process again.
The SmartCard is
blocked.
Enter the PUK:
You have exceeded the maximum allowed number of incorrect PIN entries.
The SmartCard is blocked. Enter the administrator PUK to re-activate the
SmartCard. You must then enter a new User PIN to restart the system.
88 Fujitsu
Security functions
Trusted Platform Module (TPM) (device-dependent)
TPMTrustedPla tform Module
To use the TPM, you must activate the TPM in the BIOS Setup before the software
is installed. The condition for this is that you have assigned at least the supervisor
password (see "Security functions", Page 69).
Enabling TPM
• Requirement: You have set a supervisor password, see "Security functions", Page 69.
►Call up the BIOS Setup and select the Security menu.
►Mark the TPM Security Chip Setting field and press the Enter key.
►Select Enabled to activate the TPM.
Once you have activated the TPM the Clear Security Chip option appears.
Select Clear SecurityChipto delete the holder in the TPM. By clicking on Enabled,
all secret keys (e.g. SRK - Storage Root Keys, AIK - Attestation Identity Keys
etc.) generated by applications are deleted.
Please note that you will then no longer be able to access the data you have
encrypted with the keys based on that holder.
►In the Exit menu, choose the option Exit Saving Changes.
►Press the enter key and select Yes.
The notebook will restart, and TPM will be enabled after the reboot.
Disabling TPM
• Requirement: You have set a supervisor password, see "Security functions", Page 69.
►Call up the BIOS Setup and select the Security menu.
►Mark the TPM Security Chip Setting field and press the Enter key.
►Select Disabled to deactivate the TPM.
►In the Exit menu, choose the option Exit Saving Changes.
►Press the enter key and select Yes.
Your notebook will now restart and TPM will be disabled.
Fujitsu 89
Security functions
Enable password entry using the on-screen keyboard
(on-screen keyboard for BitLocker password)
If TPM is enabled, in the BIOS Setup you can enable an on-screen
keyboard for the internal touchscreen.
►Call BIOS Setup and select the Advanced menu.
►Mark Boot Configurations and press the enter key.
►From the UEFI Boot On-Screen Keyboard Location selection, choose the
option Lower Right or Upper Right.
►From the Exit menu, choose the option Exit Saving Changes.
►Press the Enter key and select Yes.
The notebook restarts and the password dialogue is displayed.
Tap on the password field to enable the on-screen keyboard.
90 Fujitsu
Connecting external devices
Connecting external devices
Always refer to the safety information provided in "Important notes", Page 12 before
connecting or disconnecting any devices to or from your notebook.
Always read the documentation supplied with the device you wish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
With some devices such as USB devices, it is not necessary to switch off
the notebook and the device before connecting/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the external device.
Some of the external devices require special drivers (see the operating
system and external device documentation).
Fujitsu 91
Connecting external devices
Connecting an external monitor
An analogue monitor is connected to the analogue VGA monitor port, a digital monitor
to the DisplayPort or to the DVI-D monitor port on the optional Port Replicator.
Monitor output is limited to a maximum of two monitors at any one time (see "Key
combinations", Page 46, section "Toggle output monitor").
MonitorVGAcon nection socketMonitorportMonitorport
Analogue VGA monitor port (on notebook or on
optional port replicator)
Digital DisplayPort (on optional port replicator)
Digital DVI-D monitor port (on the optional Port
Replicator)
►Switch off the notebook and the external monitor.
►Plug the data cable of the external monitor into the monitor port.
►First switch on the external monitor and then the notebook.
You can also switch between the external monitor and the LCD monitor of the
notebook, see chapter "Key combinations", Page 46.
You can display the same picture on the external monitor and the
notebook LCD monitor simultaneously.
92 Fujitsu
Connecting external devices
HDMI port
HDMIport
The HDMI port on your notebook can be used to connect an external amplifier,
LCD TV or a plasma TV with an HDMI connection.
►Connect the data cable to the
external device.
►Connect the data cable to the HDMI
port of the notebook.
Connecting USB devices
USBports
On the USB ports, you can connect external devices that also have a USB port
(e.g. a DVD drive, a printer, a scanner or a modem).
USB devices are hot-pluggable. This means you can connect and disconnect
devices while your operating system is running.
USB 1.x has a maximum data transfer rate of 12 Mbit/s.
USB 2.0 has a data transfer rate of up to 480 Mbit/s.
USB 3.0 has a data transfer rate of up to 5 Gbit/s.
Additional information can be found in the documentation for the USB devices.
►Connect the data cable to the
external device.
►Connect the data cable to a USB
port of the notebook.
Device drivers
USB devices will be automatically recognised and installed by your operating system.
Fujitsu 93
Connecting external devices
USB port with charging function (Anytime USB charge)
USBchargingfunction
It is recommended that the notebook be operated with the power supply connected
whenever the USB port with charging function is in use, as this function will drain
the battery more quickly if an external USB device is being charged.
The power supply unit must already be connected when the notebook is
switched off, as otherwise the USB charging function will be disabled and
the connected USB devices will not be charged.
Some USB devices (e.g. mobile telephones) require a driver in order to utilise the
USB charging function. In this case the USB charging function will not work when the
notebook is switched off, as no drivers are active when the notebook is switched off.
You can use this USB port to charge or supply power to a USB device (e.g. to charge a PDA
or a mobile phone or to connect a USB lamp), even if the notebook is switched off.
94 Fujitsu
Connecting external devices
Connecting an external SATA hard disk (eSATA)
(port replicator only)
The notebook itself does not have an eSATA port. The optional Port Replicator
available for your notebook provides this port.
An external SATA hard disk can be connected at the eSATA port. This allows you
to expand the internal hard disk capacity as you wish.
The length of the eSATA cable must not exceed 2 metres. Consult a specialist
dealer for advice on which eSATA data cable is suitable for your external eSATA
hard disk. Make sure that the hard disk has its own external power supply.
The data transfer rate is up to 2,400 Mbit/s.
eSATA
►Connect the data cable to the external
device.
►Connect the data cable to the eSATA port.
Device drivers
The eSATA hard disk is automatically recognised by your operating system and installed.
You will find more information in the documentation for the external SATA
hard disk and the operating system.
Safe removal of eSATA and USB devices
Always correctly remove the device according to the rules described below,
to ensure that none of your data is lost.
►Left-click on the symbol to remove hardware safely.
►Select the device you wish to shut down and remove.
►Press the "Enter" key.
Wait for the dialogue box which tells you that it is now safe to remove the device.
Fujitsu 95
Connecting external devices
Connecting external audio devices
Microphone port/Line In
Audiodevices, connectingAudioportsMicrophone ,connecting
The microphone port/Line In allows you to connect an external microphone, a MiniDisc
player, MP3 player, CD player or a tape deck to your notebook.
►Connect the audio cable to the
external device.
►Connect the audio cable to the microphone
port/Line In of the notebook.
Headphone port
Connectingaudiodevices
AudioportsConnectingheadphones
You can connect headphones or external loudspeakers to your notebook via the headphone port.
►Connect the audio cable to the
external device.
►Connect the audio cable to the headphone
port of the notebook.
The internal loudspeakers are disabled.
If you purchase a cable from a retailer, please note the following information:
The headphone port on your notebook is a "3.5 mm jack socket".
If you want to connect headphones or a speaker you will need a "3.5 mm jack plug".
96 Fujitsu
Removing and installing components during servicing
Removing and installing components
during servicing
Only qualified technicians should repair your notebook. Unauthorised
opening or incorrect repair may greatly endanger the user (electric shock,
fire risk) and will invalidate your warranty.
Components
Serv icing
After consulting the Hotline/Service Desk, you may remove and install the
components described in this chapter yourself.
If you remove and install components without consulting the Hotline/Service
Desk, then the warranty of your notebook will be voided.
Notes on installing and removing boards
and components
• Switch the notebook off and pull the power plug out of the mains socket.
• Always remove the battery.
• Take care when you use the locking mechanisms on the battery and any other component.
• Never use sharp objects such as screwdrivers, scissors or knives as leverage to remove covers.
NotesBoardESD
Boards with electrostatic sensitive devices (ESD) are marked with the label
shown.
When handling boards fitted with ESDs, you must always observe the following
points:
• You must always discharge static build up (e.g. by touching a grounded
object) before working.
• The equipment and tools you use must be free of static charges.
• Remove the power plug from the mains supply before inserting or removing
boards containing ESDs.
• Always hold boards with ESDs by their edges.
• Never touch pins or conductors on boards fitted with ESDs.
Fujitsu 97
Removing and installing components during servicing
Preparing to remove components
If you are going to remove or change system components, prepare for the removal as follows:
Please observe the safety information in chapter "Important notes", Page 12.
Remove the power plug from the mains outlet !
►Switch the device off.
The device must not be in energy-saving mode !
►Close the LCD screen.
►Remove all the cables from the device.
►Turn the device over and place it on a stable, flat and clean surface. If necessary, lay an
anti-slip cloth on this surface to prevent the device from being scratched.
►Remove the battery (see "Removing the battery", Page 51).
Installing and removing memory expansion
MemorymoduleMainmemoryRemovingmemory
Systemexpansi on
Systemexpansi on
If you are asked by the Hotline/Service Desk to remove and install the memory
expansion yourself, proceed as follows:
Please observe the safety information in chapter "Important notes", Page 12.
When installing/removing memory modules, the battery must be removed from
the notebook and the notebook must not be connected to the power supply,
see "Preparing to remove components", Page 98.
Only use memory expansion modules that have been approved for your
notebook (see "Technical data", Page 117).
Never use force when installing or removing a memory extension.
Make sure that foreign objects do not fall into the memory extension compartment.
You must open the service compartment to remove or install a memory module. On some devices,
opening the compartment may expose other components. These components should be removed
and replaced only by authorised specialists. Therefore, be sure to observe the following:
Individual components can become very hot during operation. Therefore, we
recommend that you wait one hour after switching off the notebook before removing
or installing memory modules. Otherwise, there is a risk of suffering burns!
As some components are exposed that are sensitive to static electricity, please take
note of chapter "Notes on installing and removing boards and components", Page 97.
98 Fujitsu
Removing and installing components during servicing
Removing a cover
1
2
►Remove the screw (1).
►Lift the cover off the notebook in the direction of the arrow (2).
Removing memory modules
3
2
1
1
►Carefully push the two mounting
clips outwards (1).
Memoryexpansion
Memorymodule
The memory module snaps upwards (2).
►Pull the memory module out of its slot
in the direction of the arrow (3).
Fujitsu 99
Removing and installing components during servicing
Installing a memory module
2
a
1
2
►Insert the memory module with the contacts
and the recess (a) facing the slot (1).
MemoryexpansionMemorymodule
►Carefully push the memory module
downwards until you feel it click
into place (2).
Attaching the cover
1
2
►Place the cover into position, following the direction of the arrow (1).
►Fasten the cover with the screw (2).
100 Fujitsu
Removing and installing components during servicing
Removing and installing the harddisk
Removing a cover
2
1
3
►Remove the screw (1).
Keep the screw in a safe place. If you are removing more than one component at
the same time, store the screws for the individual components separate from each
other. If you install the wrong screws, components may be damaged.
►Slide the cover in direction of the arrow (2).
►Lift the cover off the notebook (3).
Fujitsu 101
Removing and installing components during servicing
Removing a hard disk
1
2
►Carefully disengage the connector for the hard disk (1).
►Remove the hard disk from the hard disk compartment (2) by lifting it
upwards using the two rubber lugs.
102 Fujitsu
Removing and installing components during servicing
Installing a hard disk
1
2
►Place the hard disk into the hard disk compartment (1).
►Attach the connector for the hard disk (2).
Fujitsu 103
Removing and installing components during servicing
Attaching the cover
2
1
3
►Place the cover in the correct mounting position (1).
►Slide the cover in the direction of the arrow (2).
►Tighten the screw (3).
Finishing component removal
After you have removed or changed the system components as you required, please
prepare your device for operation again as follows:
►Install the battery again (see "Inserting battery", Page 52).
►Turn the notebook the right way up again and place it on a flat surface.
►Reconnect the cables that you disconnected before.
104 Fujitsu
Settings in BIOS Setup Utility
Settings in BIOS Setup Utility
BIOSSetupUtilitySystemsettings,BIOSSe tupUtilityConfiguration,BIOSS etupUtilitySetupSystemconfigurationHardwareconfiguration
The BIOS Setup Utility allows you to set the system functions and the hardware
configuration for the notebook.
When it is delivered, the notebook is set to factory default settings. You can
change these settings in BIOS Setup Utility. Any changes you make take effect as
soon as you save and exit the BIOS Setup Utility.
The BIOS Setup Utility program contains the following menus:
About Displays information relating to the BIOS, processor and notebook
System Advanced system settings
Advanced Configuration of various hardware components, such as mouse, keyboard,
processor
Security Password settings and security functions
Boot Configuration of the start-up sequence
Exit Exits the BIOS Setup Utility
Starting the BIOS Setup Utility
►Reboot the device (switch off/on or reboot the operating system).
BIOSSetupUtility
Depending on the Fast Boot setting in the BIOS Setup utility, the following
information may appear on the screen during start:
<F2> BIOS Setup <F12> Boot Menu
►Press the function key F2 .
►If a password has been assigned, enter the password and press the Enter key.
If you have forgotten the password, contact your system administrator
or contact our customer service centre.
The BIOS Setup Utility starts.
Fujitsu 105
Settings in BIOS Setup Utility
Operating BIOS Setup Utility
BIOSSetupUtility
Press the F1 key to display help on the operation of the BIOS Setup Utility. The description
of the individual settings is shown in the right-hand window of the BIOS Setup Utility.
With the F9 key you can load the default settings of the BIOS Setup Utility.
►Use the cursor keys ←or →to select the menu you wish to access to make changes.
The menu is displayed on the screen.
►Select the option you want to change with the cursor keys ↑or ↓.
►Press the Enter key.
►Press the ESC key to exit the selected menu.
►For future reference, make a note of the changes you have made (for example, in this manual).
106 Fujitsu
Settings in BIOS Setup Utility
Exiting BIOS Setup Utility
BIOSSetupUtility
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Changes - save changes and exit BIOS Setup Utility
►To save the current menu settings and exit the BIOS Setup Utility,selectExit Saving Changes and Yes.
The notebook is rebooted and the new settings come into effect.
Exit Discarding Changes – Discard changes and
exit BIOS Setup Utility
►To discard the changes, select Exit Discarding Changes and Yes.
The settings in place when BIOS Setup Utility was called remain effective. BIOS
Setup Utility is terminated and the notebook is rebooted.
Load Setup Defaults – Copy Standard Entries
►To copy the standard entries for all menus of the BIOS Setup Utility,
choose Load Setup Defaults and Yes .
Discard Changes – Discard changes without exiting
the BIOS Setup Utility
►To discard the changes you have made, select Discard Changes and Yes.
ThesettingsinplacewhenBIOS Setup Utility was called remain effective.
You can now make additional settings in the BIOS Setup Utility.
►If you want to exitBIOS Setup Utilitywith these settings, select Exit Saving Changes and Yes.
Save Changes - save changes without exiting
the BIOS Setup Utility
►To save the changes, select Save Changes and Yes.
The changes are saved. You can now make additional settings in the BIOS Setup Utility.
►If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes.
Save Changes and Power Off
►To save the changes and switch off your device, select Save Changes and Power Off and Yes.
The changes are saved. Your device is shut down.
Fujitsu 107
Troubleshooting and tips
Troubleshooting and tips
TroubleshootingTi psFaultTroubleshooting
Follow the safety notes in the "Safety/Regulations" manual when
connecting or disconnecting cables.
If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows:
►Make a note of the steps and the circumstances that led to the fault. Also
make a note of any error messages displayed.
►Switch the notebook off.
►Please contact the Hotline/Service Desk.
You can find the telephone numbers in the service desk list. Please have
the following information ready when you call:
• The model name and serial number of the notebook. The serial number is
located on a sticker on the underside of the notebook.
• Notes of any messages that appear on the screen and information on acoustic signals.
• Any changes you have made to the hardware or software since
receiving the notebook.
• Any changes you have made to the BIOS Setup settings since receiving the notebook.
• Your system configuration and all peripheral devices connected to your system.
• Your sales contract.
Our notebooks have been designed primarily with mobile applications in mind. This
means that considerable effort has been made to optimise components and equipment
in terms of weight, space and energy requirements. Depending on the particular
configuration you have purchased, it is possible that functionality may be slightly reduced
compared to a desktop PC if you are running processor-intensive gaming software, e.g.
games with intensive 3D graphics. Updating your hardware with drivers which have not
been approved by Fujitsu Technology Solutions may result in performance losses, data
losses or malfunction of the equipment. A list of approved drivers and current BIOS
versions can be downloaded from: "http://support.ts.fujitsu.com/Download/Index.asp"
Help if problems occur
Should you encounter a problem with your computer that you cannot resolve yourself:
►Note the ID number of your device. The ID number is found on the type rating
plate on the back or underside of the casing.
►For further clarification of the problem, contact the Service Desk for your country (see the
Service Desk list or visit the Internet at
"http://support.ts.fujitsu.com/contact/servicedesk/ServiceDeskNumber_Int.asp"). When you
do this, please have ready the ID number and serial number of your system.
108 Fujitsu
Troubleshooting and tips
The notebook’s date or time is incorrect
Timenotcorrec tTimenotcorrec tIncorre ct da te/ tim eDateisincorrectBufferbattery,load
Cause Troubleshooting
Time and date are incorrect. ►With the BIOS-Setup-Utility,you can set the
date and time in the main menu.
If the time and date are still set incorrectly after
switching on the notebook.
►Please contact your sales outlet or our
Hotline/Service Desk.
Battery indicator does not illuminate
Cause Fault elimination
The battery is not installed correctly. ►Switch the notebook off.
►Check whether the battery is installed
correctly in its compartment.
►Switch the notebook on.
The battery is fully discharged. ►Charge the battery.
or
►Install a charged battery.
or
►Connect the notebook to a mains outlet
using the mains adapter.
When certain characters are entered on the
keyboard, only numerals are written
Abeepsounds e verys eco nd
Cause Troubleshooting
The virtual numeric keypad of your device is
activated, see "Virtual numeric keypad", Page 45
►Press the Num key.
The notebook’s LCD screen remains blank
LCDscreenLCDscreenistoodark
Cause Troubleshooting
Monitor is switched off. ►Press a key or touch the touchpad.
External monitor or television set connected. ►Press the key combination to switch the
screen output, see "Key combinations",
Page 46.
Fujitsu 109
Troubleshooting and tips
The LCD screen is difficult to read
LCDscreenLCDscreen
Cause Troubleshooting
Reflected glare ►Turn the notebook or alter the tilt of the LCD
screen.
►Increase the brightness of the screen.
The external monitor remains blank
Monitor
Cause Troubleshooting
Monitor is switched off. ►Switch the external monitor on.
Power saving has been activated (monitor is
blank).
►Press any key to continue.
Brightness is set to dark. ►Adjust the brightness of the monitor.
Screen output is set to the notebook’s LCD
screen
►Press the key combinationtoswitchthe
screen output, see "Key combinations",
Page 46.
The external monitor’s power cable or data
cable is not connected properly.
►Switch off the external monitor and the
notebook.
►Check whether the power cable is plugged
properly into the external monitor and into
the power socket.
►Check whether the data cable is properly
connected to the notebook and the external
monitor (if it is plugged in with a connector).
►Switch on the external monitor and the
notebook.
The external monitor is blank or the image is unstable
ScreenMonitor
Cause Troubleshooting
The wrong external monitor has been selected
or the wrong screen resolution has been set for
the application program.
►Terminate the application program in
Windows by pressing Alt +F4 .Ifthe
fault persists after closing the program, use
the key combination for switching the screen
output (see "Key combinations", Page 46)to
switch over to the notebook’s LCD screen.
Change the following setting:
►Set the screen resolution: Set the screen
resolution as described in the documentation
foryouroperatingsystem.
►Select monitor: Select monitor 1 or 2 as
described in the documentation for your
operating system.
110 Fujitsu
Troubleshooting and tips
The cursor does not correctly follow the
pen movements
Cause Fault elimination
Pen incorrectly calibrated ►Calibrate the pen as shown under Hardware
and Sound / Tablet PC Settings in the Control
Panel, see "Setting the pen", Page 38 and
"Calibrating the pen", Page 38.
Pen input not working
Cause Troubleshooting
Incorrect driver installed. ►If your device is one which can only be
operated using the pen, install the driver for
the standard model.
or
►If your device is one which can be
operated using the pen and by finger,
install the driver for the "Dual Digitizer"
model.
The notebook cannot be started
Notebook
Cause Troubleshooting
The battery is not installed correctly. ►Check whether the battery is installed
correctly in its compartment.
►Switch the notebook on.
The battery is dead. ►Charge the battery.
or
►Insert a charged battery.
or
►Connect the mains adapter to the
notebook.
The power adapter is not connected correctly. ►Check whether the mains adapter is
connected correctly to the notebook.
►Switch the notebook on.
Fujitsu 111
Troubleshooting and tips
The notebook stops working
NotebookEnergys aving mode
Cause Troubleshooting
Notebook is in energy saving mode. ►Leave energy saving mode.
An application programme has caused the
malfunction.
►Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).
The battery is dead. ►Charge the battery.
or
►Insert a charged battery.
or
►Connect the mains adapter to the
notebook.
The printer does not print
Printerdoesnot print
Cause Troubleshooting
The printer is not switched on. ►Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).
The printer is not connected correctly. ►Check that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.
►Check that the data cable connecting
the notebook to the printer is properly
connected.
►Check whetherthecorrectprinterdriveris
loaded (refer to the printer documentation).
The radio connection to a network does not work
Theradioconnect iontoane tworkdoes notwork
Cause Troubleshooting
The wireless component is disabled. ►Switch the radio component on (see
"Switching the wireless components on and
off", Page 62).
The wireless component is enabled. Despite
this, the wireless connection to a network does
not work.
►Check whether the radio connection is
switched on via the software.
►Further information on using the radio
component can be found in the help files.
112 Fujitsu
Troubleshooting and tips
The battery discharges too quickly
Battery:
Cause Troubleshooting
The battery is either too hot or too cold. In this
case the battery indicator flashes.
►Bring the notebook up/down to a normal
temperature again.
►If the operating time of the battery life is
extremely short, the battery is probably too
old. Replace battery if necessary.
You may have an application running that
consumes a great deal of power due to frequent
accessing of the hard disk or optical drive.
►Use the mains adapter as frequently as
possible.
The maximum brightness may have been set
for the screen.
►Set the screen slightly darker with the
key combination for Decreasing the screen
brightness in order to reduce the amount of
power being drawn.
SmartCard reader is not recognised.
Cause Troubleshooting
Chip card inserted incorrectly. ►Make sure you have inserted your
SmartCard into the SmartCard reader
with the chip facing upwards/downwards
(device-dependent).
►Check whether the SmartCard you are using
is supported. Your SmartCard must comply
with the ISO standard 7816-1, -2, -3 and -4.
SmartCard PIN forgotten
Cause Troubleshooting
PIN forgotten ►If you are working in a network, contact your
system administrator, who can unlock your
notebook with a Supervisor PIN.
SmartCard lost
Cause Troubleshooting
SmartCard lost ►If you are working in a network, contact your
system administrator, who can boot up your
notebook with a Supervisor SmartCard.
Fujitsu 113
Troubleshooting and tips
User and/or supervisor SmartCard lost
Cause Troubleshooting
User and/or supervisor SmartCard lost ►If you have lost your User SmartCard, you
can continue working with the Supervisor
SmartCard and initialise a new User
SmartCard or deactivate the SystemLock
function.
►If you have lost the Supervisor SmartCard,
you can continue working, but you no longer
have all your rights and can no longer
initialise a Supervisor SmartCard.
►If you have lost both SmartCards, you can
no longer boot your system. Please contact
our Service Desk. You must provide proof of
ownership for the device. Then the Service
Deskwillreferyoutoourservicepartner,
who will unlock your device (for a charge).
Acoustic warnings
Acousticerrormessages
Errors
Cause Troubleshooting
A beep sounds every few seconds.
The battery is almost flat.
►Charge the battery.
114 Fujitsu
Troubleshooting and tips
Error messages on the screen
Errormessages onthescr eenErrormessage:
This section describes the error messages generated by the BIOS Setup. Error messages displayed
by the operating system or programmes are described in the relevant documentation.
If the error message appears repeatedly, despite troubleshooting measures, please
contact the place of purchase or our customer service centre.
Error message/cause Resolution
CMOS battery bad
If the error message occurs repeatedly, the
buffer battery in the notebook is flat.
►Contact your sales outlet or our customer
service centre.
System CMOS checksum bad - default configuration
used
The system configuration information is
incorrect.
►Switch the notebook off.
►Switch the notebook on.
►Press the function key F2 to access the
BIOS Setup.
►In the BIOS Setup, select the Exit menu.
►Select the entry Load Setup Defaults.
►Select OK and press the Enter key.
Extended memory failed at offset: xxxx Failing Bits:
zzzz zzzz
When testing the extended memory an error has
resulted at the address xxxx.
►Check whether the additional memory
module has been inserted correctly.
Failure Fixed Disk n
The settings of the hard disk drive are incorrect.
►Start the BIOS Setup (Primary Master
submenu) and select the correct settings.
Keyboard controller error ►Switch the notebook off with the ON/OFF
switch.
►Wait 3 - 5 seconds and switch on the
notebook again.
Keyboard error If you are using an external keyboard:
►Check the connection and reboot the
notebook.
nn Stuck key ►Make sure that no key is pressed.
Operating system not found ►Check in the BIOS Setup whether your hard
disk has been set correctly.
►Make sure that the operating system is
installed on the corresponding drive.
Press <F1> to resume, <F2> to SETUP
This error message appears if an error occurs
during the self-test before starting the operating
system.
►Press the F1 function key to start the
operating system.
►Press the function key F2 to access the
BIOS Setup.
Fujitsu 115
Troubleshooting and tips
Error message/cause Resolution
Previous boot incomplete - Default configuration
used Due to an error during the previous system
boot, default values were used for certain
settings. Check the settings in the BIOS Setup.
►Press the F1 function key when prompted
to do so.
Real time clock error ►Contact your sales outlet or our customer
service centre.
nnnnK Shadow RAM failed at offset: xxxx Failing
Bits: zzzz
►Contact your sales outlet or our customer
service centre.
System battery is dead - Replace and run SETUP ►Contact your sales outlet or our customer
service centre.
System cache error - Cache disabled ►Contact your sales outlet or our customer
service centre.
System timer error ►Contact your sales outlet or our customer
service centre.
Restoring the contents of the hard disk
under Windows
Restoring the system under Windows 8/8.1
If necessary, you can reset your system to the original state of the hard disk.
►Starting from the right side of the Windows start screen or the desktop, wipe over
the screen with a finger to open the charm with the system commands, or press
the Windows key + the Ckey on an external keyboard.
►Select Change PC Settings.
►Select Update/Recovery.
►Select Recovery.
►Choose between the following options according to your requirements: Refresh your PC
without affecting your files or Remove everything and reinstall Windows.
Restore factory settings and reinstall the operating system
with the Hard Disk Based Recovery (HDBR) under Windows 7
►Switch the device on.
►While the Fujitsu start screen is being shown, hold the F8 button pressed
until the Advanced Boot Options menu is displayed.
►Select Repair your computer.
►Select the desired keyboard input method via Keyboard input method,e.g.English.
►Select the correct user, enter the current user password and confirm with OK.
►Select Fujitsu Recovery.
►Follow the instructions to reset the system to the factory settings.
116 Fujitsu
Technical data
Technical data
Notebook
General
Processor 5th generation Intel® Core™ with vPro™
technology (vPro optional, dependent on
configuration)
Main memory (SO DIMM) Maximum 12 Gbyte DDR3
4 GBytes permanently installed main memory
(soldered)
1 slot for 2, 4 or 8 Gbyte modules
Electrical data
Safety regulations complied with CE
Protection class III
Maximum power draw (when the notebook is
switched on and the battery is being charged):
• 65 W without port replicator
• 80 W with port replicator
LCD screen
Size 31.75 cm / 12.5" TFT HD
Resolution 1366 x 768 (HD), 16 mio. colors
Pixel class II
Brightness control 11 levels
Technology Wide-View High-Bright HD Display with LED
Background Lighting
Digitizer and glass panel • Dual Digitizer
• Matt touchscreen
• Toughened glass
WebCam Full-HD camera (1080 p), with status indicator
Graphics card
Chip Intel® HD Graphics 5500
Maximum resolution on external display: VGA: 1920 x 1200 subpixels, 16 million colors
HDMI: 4096 x 2160@24Hz, 3840 x 2160@30Hz
on port replicator:
•VG
A: 1920 x 1200 subpixels
• DVI: 1920 x 1200 subpixels
•D
isplayPort: 2560 x 1600 subpixels
Dimensions
Width x depth x height 316 mm x 233 mm x 25.4 - 31.3mm /
12.43 inches x 14.76 inches x 1 - 1.23 inches
with rubber feet
Weight depending on configuration from 1.81 kg / 3.99 lbs
Fujitsu 117
Technical data
Input devices
Keyboard 85 buttons, splash-protected
Touchpad 2 keys
Tablet buttons 1 Windows button, volume + button, volume –
button
Pen 1 freely programmable rocker button / eraser
Slots
Memory card slot 1xSDCard
SIM card slot 1x
SmartCard reader (device-dependent) 1x
Ports
VGA monitor port 15-pin socket
HDMI port 1 x
LAN port Socket, RJ45
Microphone port/Line In 3.5mmstereominijack
Headphones port/Line Out 3.5mmstereomin
ijack
Docking port 100-pin socket
USB (Universal Serial Bus) Total: 3 x USB (1 x USB 3.0 with charging
function (Anytime USB charge), 2 x USB 3.0)
Security Lock1x
Ambient conditions
Environment class DIN IEC 721 7K1
Mechanism class DIN IEC 721 7M2
Operating temperature 5℃.... 35℃/ 41°F .... 95°F
Transport temperature (2K2) –15°C .... 60°C / 5°F .... 140°F
118 Fujitsu
Technical data
Port Replicator (optional)
Electrical data
Safety regulations complied with CE
Protection class III
Ports
VGA monitor port 15-pin socket
DVI-D monitor port 25-pin socket
DisplayPort 2 x
LAN port RJ45
USB (Universal Serial Bus) 4xUSB3.0
eSATA port 1x
Audio Headphone and microphone port
Docking port 100-pin
Security Lock 1x
Ambient conditions
Environment class DIN IEC 721 7K1
Mechanism class DIN IEC 721 7M2
Operating temperature 5℃.... 35℃/ 41°F .... 95°F
Transport temperature –15°C .... 60°C / 5°F .... 140°F
Rechargeable battery
You will find information on the batteries used in your device on the
Internet at "http://www.fujitsu.com/fts/support/".
In addition to the main battery, you can order an optional battery which is inserted in the module slot.
All rechargeable batteries are 6-cell batteries.
Main battery
Optional battery
(to be inserted in
the module bay)
Rated voltage 11.25 V 10.8 V
Rated capacity 72 Wh 28 Wh
Nominal power 6400 mAh 2600 mAh
The operating time depends on the device configuration, the active
applications and the energy-saving settings.
Fujitsu 119
Technical data
Mains adapter for use with the notebook
and port replicator
The following technical data applies to the mains adapter supplied with the
notebook and to the port replicator which you can order optionally.
Primary
Rated voltage 100 V to 240 V (automatic)
Rated frequency 50 Hz to 60 Hz (automatic)
Max. rated current 0.7 A to 1.2 A
Secondary
Nominal power 80 W
Rated voltage 19 V
Max. rated current 4.22 A
An additional mains adapter or power cable can be ordered at any time.
120 Fujitsu
Manufacturer’s notes
Manufacturer’s notes
Disposal and recycling
Notes
You can find information on this subject on your notebook or on our website
("http://www.fujitsu.com/fts/about/fts/environment-care/").
Declarations of Conformity
Declarationof conformity
The "Declarations of Conformity" for the device can be found on the Internet at:
"http://globalsp.ts.fujitsu.com/sites/certificates/default.aspx".
Fujitsu Technology Solutions hereby declares that your device is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
CE marking
CEmarking
CE marking for devices with radio component
The shipped version of this device complies with the requirements of Directive 2009/125/EC
"Ecodesign directive", Directive 2011/65/EU "RoHS Directive" and R&TTE directive 199/5/EC
of the European Parliament and Commission of 9th March 1999 governing Radio and
Telecommunications Equipment and mutual recognition of conformity.
CE nnnn (!) ; nnnn: For digits and exclamation mark (!), see label on the product.
You can find more information and declarations of conformity on the Internet at:
"http://globalsp.ts.fujitsu.com/sites/certificates".
This equipment can be used in the following countries:
Belgium Bulgaria Denmark Germany
Estonia Finland France Greece
UK Ireland Iceland Italy
Latvia Liechtenstein Lithuania Luxembourg
Malta The Netherlands Norway Austria
Poland Portugal Rumania Sweden
Switzerland Slovakia Slovenia Spain
Czech Republic Hungary Cyprus Croatia
Turkey
Contact the corresponding government office in the respective country for current information on
possible operating restrictions. If your country is not included in the list, then please contact the
corresponding supervisory authority as to whether the use of this product is permitted in your country.
Fujitsu 121
Manufacturer’s notes
Other certification markings
Certificationmarkings
Any other certification markings are listed in the "Manual Appendix -
Additional Certifications" supplement.
If such markings are available, you can find the supplement on the Internet at
"http://support.ts.fujitsu.com/Manuals/" with the Operating Manual for your device.
Regulatory notices
If there is no FCC logo and also no FCC ID on the device then this device is
not approved by the Federal Communications Commission (FCC) of the USA.
Although it is not explicitly forbidden to travel in the US trading area carrying this
device, to avoid trouble at customs clearance, Fujitsu Technology Solutions GmbH
recommends not to bring this device into the US trading area.
Regulatory information for notebooks without radio device
Regulatoryinform ation
NOTICE:
Changes or modifications not expressly approved by Fujitsu Technology Solutions
could void this user’s authority to operate the equipment.
Notice to Users of Radios and Television
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet that is on a different circuit than the receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Notice to Users of the US Telephone Network
Your notebook may be supplied with an internal modem which complies with Part 68 of the
FCC rules. On this notebook is a label that contains the FCC Registration Number and the
Ringer Equivalence Number (REN) for this equipment among other information. If requested,
the user must provide their telephone company with the following information:
1. The telephone number to which the notebook is connected.
2. The Ringer Equivalence Number (REN) for this equipment.
3. The equipment requires a standard modular jack type USOC RJ-11C
which is FCC Part 68 compliant.
4. The FCC Registration Number.
This equipment is designed to be connected to the telephone network or premises wiring using
a standard modular jack type USOC RJ-11C which is FCC Part 68 compliant and a line tether
between the modem and the telephone network with a minimum of 26AWG.
122 Fujitsu
Manufacturer’s notes
The REN is used to determine the number of devices that you may connect to your telephone
line and still have all of those devices ring when your number is called. Too many devices
on one line may result in failure to ring in response to an incoming call. In most, but not all,
areas the sum of the RENs of all of the devices should not exceed five (5). To be certain
of the number of devices you may connect to your line, as determined by the RENs, contact
your local telephone company. If this equipment causes harm to the telephone network, your
telephone company may discontinue your service temporarily. If possible, they will notify you
in advance. If advance notice is not practical they will notify you as soon as possible. You
will also be advised of your right to file a complaint with the FCC.
This fax modem also complies with fax branding requirements per FCC Part 68.
Your telephone company will probably ask you to disconnect this equipment from the telephone
network until the problem is corrected and you are sure that the equipment is not malfunctioning.
This equipment may not be used on coin-operated telephones provided by your telephone
company. Connection to party lines is subject to state tariffs. Contact your state’s public utility
commission, public service commission or corporation commission for more information.
This equipment includes automatic dialing capability. When programming and/or
making test calls to emergency numbers:
• Remain on the line and briefly explain to the dispatcher the reason for the call.
• Perform such activities in off-peak hours, such as early morning or late evening.
FCC rules prohibit the use of non-hearing aid compatible telephones in the
following locations or applications:
• All public or semi-public coin-operated or credit card telephones.
• Elevators, highways, tunnels (automobile, subway, railroad or pedestrian) where a
person with impaired hearing might be isolated in an emergency.
• Places where telephones are specifically installed to alert emergency authorities
such as fire, police or medical assistance personnel.
• Hospital rooms, residential health care facilities, convalescent homes and prisons.
• Hotel, motel or apartment lobbies.
• Stores where telephones are used by patrons to order merchandise.
• Public transportation terminals where telephones are used to call taxis or
to reserve lodging or rental cars.
• In hotel and motel rooms as at least ten percent of the rooms must contain hearing
aid-compatible telephones or jacks for plug-in hearing aid compatible telephones which
will be provided to hearing impaired customers on request.
DOC (Industry CANADA) notices
DOC(INDUSTRYCANADA)NOTICES
Notice to Users of Radios and Television
This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment
Regulations.
CET appareil numérique de la class B respecte toutes les exigence du Réglement
sur le matérial brouilleur du Canada.
Fujitsu 123
Manufacturer’s notes
Notice to Users of the Canadian Telephone Network
NOTICE:
This equipment meets the applicable Industry Canada Terminal Equipment Technical
Specifications. This is confirmed by the registration number. The abbreviation, IC, before
the registration number signifies that registration was performed based on a Declaration of
Conformity indicating that Industry Canada technical specifications were met. It does not
imply that Industry Canada approved the equipment. Before connecting this equipment to
a telephone line the user should ensure that it is permissible to connect this equipment to
the local telecommunication facilities. The user should be aware that compliance with the
certification standards does not prevent service degradation in some situations.
Repairs to telecommunication equipment should be made by a Canadian authorised
maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or
any equipment failures may give the telecommunication company cause to request the
user to disconnect the equipment from the telephone line.
NOTICE:
The Ringer Equivalence Number (REN) for this terminal equipment is 0.0. The REN assigned
to each terminal equipment provides an indication of the maximum number of terminals
allowed to be connected to a telephone interface. The termination on an interface may
consist of any combination of devices subject only to the requirement that the sum of the
Ringer Equivalence Numbers of all the devices does not exceed five.
CAUTION:
For safety, users should ensure that the electrical ground of the power utility, the
telephone lines and the metallic water pipes are connected together. Users should NOT
attempt to make such connections themselves but should contact the appropriate electric
inspection authority or electrician. This may be particularly important in rural areas.
Avis Aux Utilisateurs Du Réseau Téléphonique Canadien
AVIS : Le présent matériel est conforme aux spécifications techniques d’Industrie Canada
applicables au matériel terminal. Cette conformité est confirmée par le numéro d’enregistrement.
Le sigle IC, placé devant le numéro d’enregistrement, signifie que l’enregistrement s’est effectué
conformément à une déclaration de conformité et indique que les spécifications techniques
d’Industrie Canada ont été respectées. Il n’implique pas qu’Industrie Canada a approuvé le matériel.
Avant de connecter cet équipement à une ligne téléphonique, l’utilisateur doit vérifier
s’il est permis de connecter cet équipement aux installations de télécommunications
locales. L’utilisateur est averti que même la conformité aux normes de certification ne
peut dans certains cas empêcher la dégradation du service.
Les réparations de l’équipement de télécommunications doivent être effectuées par un service de
maintenance agréé au Canada. Toute réparation ou modification, qui n’est pas expressément
approuvée par Fujitsu, ou toute défaillance de l’équipement peut entraîner la compagnie de
télécommunications à exiger que l’utilisateur déconnecte l’équipement de la ligne téléphonique.
AVIS : L’indice d’équivalence de la sonnerie (IES) du présent matériel est de 0.0. L’IES
assigné à chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent
être raccordés à une interface téléphonique. La terminaison d’une interface peut consister
en une combinaison quelconque de dispositifs, à la seule condition que la somme d’indices
d’équivalence de la sonnerie de tous les dispositifs n’excède pas 5.
124 Fujitsu
Manufacturer’s notes
AVERTISSEMENT:
Pour assurer la sécurité, les utilisateurs doivent vérifier que la prise de terre du service
d’électricité, les lignes télphoniques et les conduites d’eau métalliques sont connectées
ensemble. Les utilisateurs NE doivent PAS tenter d’établir ces connexions eux-mêmes,
mais doivent contacter les services d’inspection d’installations électriques appropriés
ou un électricien. Ceci peut être particulièrement important en régions rurales.
UL Notice
This unit requires an AC adapter to operate. Only use a UL Listed Class 2 adapter.
The correct output rating is indicated on the AC adapter label. Refer to the illustration
below for the correct AC Adapter output polarity:
CAUTION:
To reduce the risk of fire, use only 26AWG or larger telecommunications line tether.
For Authorized Repair Technicians Only
CAUTION:
For continued protection against risk of fire, replace only with the
same type and rating fuse.
WARNING:
Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
FCC regulatory information for notebooks with radio device
Regulatoryinformation
Federal Communications Commission statement
This device complies with Part 15 of FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of this device.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy. If not installed and used in accordance with
the instructions, it may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
Fujitsu 125
Manufacturer’s notes
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the distance between the equipment and the receiver.
3. Connect the equipment to an outlet on a circuit different from the one the receiver is connected to.
4. Consult the dealer or an experienced radio/TV technician for help.
Please note the following regulatory information related to the optional radio device.
FCC Radio Frequency Exposure statement
This radio device has been evaluated under FCC Bulletin OET 65C and found compliant with the
requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF
Exposure from radio frequency devices. The radiated output power of this radio device is far below
the FCC radio frequency exposure limits. Nevertheless, this device shall be used in such a manner
that the potential for human contact during normal operation is minimized. When using this device, a
certain separation distance between antenna and nearby persons must be maintained to ensure RF
exposure compliance. In order to comply with RF exposure limits established in the ANSI C95.1
standards, the distance between the antennas and the user should not be less than 20 cm (8 inches).
Regulatory Notes and Statements
Radio device, health and authorisation for use
Radio-frequency electromagnetic energy is emitted from the wireless devices. The energy levels
of these emissions, however, are far much less than the electromagnetic energy emissions from
wireless devices such as mobile phones. Radio devices are safe for use by consumers because
they operate within the guidelines found in radio frequency safety standards and recommendations.
The use of the radio devices may be restricted in some situations or environments, such as:
• on board an airplane, or
• in an explosive environment, or
• in situations where the interference risk to other devices or services is
perceived or identified as harmful.
In cases in which the policy regarding use of radio devices in specific environments is not
clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain
authorization to use these devices prior to operating the equipment.
Regulatory Information/Disclaimers
Installation and use of this radio device must be in strict accordance with the instructions included
in the user documentation provided with the product. Any changes or modifications made to this
device that are not expressly approved by the manufacturer may void the user’s authority to operate
the equipment. The manufacturer is not responsible for any radio or television interference caused
by unauthorized modification of this device, or the substitution or attachment of connecting cables
and equipment other than those specified by the manufacturer. It is the responsibility of the user
to correct any interference caused by such unauthorized modification, substitution or attachment.
The manufacturer and its authorized resellers or distributors will assume no liability for any damage
or violation of government regulations arising from failure to comply with these guidelines.
Export restrictions
This product or software contains encryption code which may not be exported or
transferred from the US or Canada without an approved US Department of Commerce
126 Fujitsu
Manufacturer’s notes
export license. This device complies with Part 15 of FCC Rules, as well as ICES 003 B
/ NMB 003 B. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesirable operation.
Modifications not expressly authorised by Fujitsu Technology Solutions may
invalidate the user’s right to operate this equipment.
Fujitsu 127
Index
Index
A
A beep sounds every second 109
Acoustic error messages 114
Administrator functions 84
Anti-theft protection 71
Audio devices, connecting 96
Audio ports 96
B
Backspace 44
Bass loudspeaker (subwoofer) 60
Battery
battery life 50
caring for and maintaining 50
charge level 50, 58
charging 50
self-discharge 50
storage 50
Battery status meter 50
Battery:
discharges too quickly 113
BIOS Setup Utility
calling 105
exiting 107
operating 106
protecting with password 72
settings 105
Bluetooth
Switching the module off 62
Switching the module on 62
Bluetooth, safety notes 12
Board 97
Buffer battery, load 109
Buttons 43
C
Caps Lock 44
CD/DVD indicator 56
CD/DVD:
manual emergency removal 57
CE marking 121
Certification markings 122
Charging capacity, battery 50
Cleaning 15
Components
installing / removing 97
Configuration, BIOS Setup Utility 105
Connecting audio devices 96
Connecting headphones 96
Crystal View display
cleaning 15
Cursor control keys 44
Cursor keys 44
D
Date is incorrect 109
Declaration of conformity 121
Device
setting up 17
Display orientation
selecting 26
DOC (INDUSTRY CANADA) NOTICES 123
Drive
Removing 54
E
Emergency removal of data carrier 57
Energy
energy saving 13
Energy saving 13
Energy saving mode
leaving 112
Enter 44
Enter key 44
Error message:
on the screen 115
Error messages
Mainboard 88
Error messages on the screen 115
Errors
Acoustic warnings 114
ESD 97
Ethernet LAN 64
F
F10, function key 80
F2, function key 87
F3, function key 87
F5, function key 80, 83
F6, function key 80, 83
F7, function key 80
F8, function key 80, 83
F9, function key 80, 83
Fault
correction 108
Fingerprint sensor 71
configure 71
First-time setup 16
Fn key 44
128 Fujitsu
Index
Fn+F10 47
Fn+F2 46
Fn+F3 46
Fn+F4 46
Fn+F5 46
Fn+F6 46
Fn+F7 46
Fn+F8 46
Fn+F9 46
G
Getting started 16
H
Handling
data carriers 55
Hardware configuration 105
HDMI port 93
I
Important notes 12
Incorrect date/time 109
Inserting
a data carrier 56
Installing SystemLock 78
K
Keyboard 43
cleaning 15
Keyboard background lighting
switch off 46
switch on 46
L
Landscape orientation
screen 26
LCD screen
cleaning 15
difficult to read 110
notes 30
reduce brightness 46
reflected glare 110
remains blank 109
LCD screen is too dark 109
Life, battery 50
Line feed 44
Loudspeaker
switch off 46
switch on 46
Loudspeakers 60
M
Main memory
see Adding memory 98
Mains adapter
connecting 17
setting up 17
Manual removal of data carrier 57
Mechanical backup 71
Memory card
handling 59
inserting 59
removing 59
Memory expansion
installing 100
removing 99
Memory module
important notes 98
installing 100
removing 99
Microphone 60
Microphone, connecting 96
Mobile operation 14
Module
Removing 54
Module bay 54
Modules 54
Monitor
connecting 92
drifting display 110
remains blank 110
Monitor port
see VGA connection socket 92
N
Notebook
before you travel 14
cannot be started 111
cleaning 15
stops working 112
switching off 28
transporting 14
using 20
Notebook, operation 20
Notebook: switching on 23
Notes 12
boards 97
cleaning 15
disposal / recycling 121
energy saving 13
LCD screen 30
Safety 12
transport 14
Fujitsu 129
Index
Num Lock
indicator 45
Numeric keypad 43
see Virtual numeric keypad 45
O
Operating system
activating system protection 73
cancel system protection 73
protecting with password 73
Optical drive 55
P
Packaging 16
Password
changing 73
entering 72
removing 73
Password protection 72
Port Replicator
Connecting a notebook 66
Ports 65
Portrait orientation
screen 26
Ports
Port Replicator 65
Power
power consumption 58
power-management features 58
Power-on indicator 23
Preparing for operation 17
Printer does not print 112
R
Radio component:
safety notes 12
Radio components 46
Rechargeable battery 50
see Battery 50
Regulatory information
notebooks with radio device 125
Notebooks without radio device 122
Removing
a data carrier 56
Removing memory
see Adding memory 98
Return 44
S
Safety notes 12
Screen
no screen display 110
Screen brightness
increase 46
reduce 46
Security functions 69
SystemLock 74
Security functions,
SmartCard 74
Security Lock 71
Selecting a location 17
Self-discharge, battery 50
Servicing 97
Setup
see BIOS Setup Utility 105
Shift 44
Shift key 44
Shift+Tab 47
Slot
Memory cards 59
SmartCard 75
access rights 76
PIN 76
PUK 76
user groups 77
Status indicators 20
Supervisor password
changing 73
entering 72
removing 73
Suspend/Resume button 23
Switchingonforthefirst time 18
Switching on the system 75
Symbols
indicators 20
System configuration 105
System expansion 98
see Adding memory 98
System settings, BIOS Setup Utility 105
SystemLock
switching on 87
SystemLock 2
installing 82
T
Ta b b a c k 4 7
Tab key 44
The radio connection to a network does
not work 112
Time not correct 109
Tips 108
Toggle output screen 47
130 Fujitsu
Index
Touchpad 41, 46
buttons 41
cleaning 15
dragging items 42
executing commands 41
moving the pointer 41
selecting an item 41
switch off 46
Touchpad buttons 46
TPM 89
Transport
Transport damage 16
Transportation 14
Travel, notebook 14
Troubleshooting 108
Trusted Platform Module 89
U
UMTS 63
Antenna 63
Uninstalling
SystemLock 87
USB charging function 94
USB ports 93
User groups
installing 78
User password
changing 73
entering 72
removing 73
Using the Kensington Lock Cable 71
V
VGA connection socket 92
Virtual numeric keypad 45
Volume
decrease 46
increase 46
Volume control 60
W
Webcam 49
Weight Saver
Removing 54
Windows key 44
Wireless LAN
Switching the module off 62
Switchingthemoduleon 62
Wireless LAN:
safety notes 12
Fujitsu 131