Table of Contents
Goodram HL100 User Manual
Displayed below is the user manual for HL100 by Goodram which is a product in the External Solid State Drives category. This manual has pages.
Related Manuals
We recommend to retain this manual for future read.
GOODRAM HL100
and future products from the series
REFERS TO THE FOLLOWING PRODUCTS:
Below you will find explanation of symbols used in this manual. Please read
this important information before continuing.
Thank You for choosing GOODRAM product. Before the first use, please read
this user manual to learn about how to use and store this product.
SYMBOL EXPLANATION
Manufacturer declares that this product, marked with CE sign,
conforms with the essential requirements contained in EU directives
Responsible for CE marking is Wilk Elektronik SA, with its registered
office in Laziska Gorne 43-173, Mikolowska 42, Poland. Copy of the
declaration can be obtained by contacting Wilk Elektronik SA.
The product can be recycled which means that materials used for its
The product is not a toy and is not intended for children under
This product may not be treated as a household waste. It should be
utilized in appropriate recycling center.
production can be reused.
the age of three.
for these applications.
WARNING: Computer configuration, operating system and USB power
supply quality may affect performance of this SSD.
INSTALLATION
It is forbidden to place the product near the naked flame.
USAGE AND COMPATIBILITY
It is forbidden to expose this product to potential damage and excess
heat or extremely low temperatures that do not comply with
the product specification.
(e.g. industrial applications), unless it is stated that the product is dedicated
To achieve the highest performance, please connect the SSD to USB port
compatible with USB 3.2 Gen 2 standard. This SSD is also compatible with
USB 3.2 Gen 1 and USB 2.0 standards, but using them will limit device's
performance to the level specified by these standards.
This product is compatible with the following operating systems:
źMac OS X 10.4 and newer (formatting the drive to a file system other than
exFAT may be required)
Connect the attached USB cable to the external SSD and connect the other
end of the cable to a compatible USB port. The computer will identify hard
drive automatically and will install all required drivers, if needed. Product
źWindows® XP® / Vista / 7 / 8 / 8.1 / 10
is preformatted in exFAT file system by default. Please make sure that your
operating system supports this file system.
źLinux
Mass storage device intended for storage and transfer of large amounts
of data between computers.
This product is dedicated for consumer-class applications. It is not intended
It is forbidden to immerse any part of this product in water or other
liquid, especially when it operates.
to be used in systems that require high performance or high reliability
To ensure the best user experience and safe use, please follow
the precautions listed below:
źthis product is not a toy and is not intended for children under
the age of three
MANUFACTURER'S WARRANTY
Do not:
SAFETY MEASURES
Storage capacity for GOODRAM SSD is always expressed in decimal values.
That means, 1GB equals 1 000 000 000 bytes. Operating system that use
the binary conversion eg. 1GB equals 1 073 741 824 bytes may show lower
storage capacity value than advertised. Additionally, a part of the storage
is reserved for files and firmware, managing the drive.
źexpose this product to potential damage and excess heat or extremely
low temperatures
źplace the product near the naked flame
CAPACITY
źimmerse any part of this product in water or other liquid
Caution:
źprovide accurate heat dissipation
źuse this product only with compatible devices
Warranty conditions are listed in separate document, available at product
website at www.goodram.com/warranty
Mikolowska 42
MANUFACTURER
Wilk Elektronik SA
43-173 Laziska Gorne
Poland
USER MANUAL
FOR EXTERNAL SOLID STATE DRIVES „SSD”
EN