Table of Contents
Goodram M1AA User Manual
Displayed below is the user manual for M1AA by Goodram which is a product in the Memory Cards category. This manual has pages.
Related Manuals
USER MANUAL
FOR MEMORY CARDS „CARD”
It is forbidden to immerse any part of this product in water or other
liquid, especially when it operates.
It is forbidden to expose this product to potential damage and excess
heat or extremely low temperatures that do not comply with
the product specification.
USAGE AND COMPATIBILITY
Mass storage device intended for data transfer and storage in mobile
electronic devices, such as cameras, smartphones, laptops and notebook.
This product is compatible with the following operating systems:
źWindows® XP® / Vista / 7 / 8 / 8.1 / 10
źMac OS X 10.4 and newer
źLinux
This product is dedicated for consumer-class applications. It is not intended
to be used in systems that require high performance or high reliability
(e.g. industrial applications), unless it is stated that the product is dedicated
for these applications.
Speed class notification and UHS symbol indicates the minimum write
speed. Speed class notifications that are defined by SD Association
are class 2, 4, 6 and 10.
Compatibility with devices (host):
źSD host – SD cards
źSDHC host – SD and SDHC cards
źSDXC host – SD, SDHC and SDXC cards
INSTRUCTION OF USAGE
Plug the memory card into a dedicated card slot. After connecting, the card
is ready to write data. Some host devices may require an additional
formatting of the card before use. To get more information, please read
the technical specification or product manual of the host device.
CAPACITY
Storage capacity for GOODRAM micro card is always expressed in decimal
values. That means, 1GB equals 1 000 000 000 bytes. Operating system that
use the binary conversion eg. 1GB equals 1 073 741 824 bytes may show
lower storage capacity value than advertised. Additionally, a part of the
storage is reserved for files and firmware, managing the drive.
SAFETY MEASURES
To ensure the best user experience and safe use, please follow
the precautions listed below:
Do not:
źexpose this product to potential damage and excess heat or extremely
low temperatures
źimmerse any part of this product in water or other liquid
źplace the product near the naked flame
Caution:
źprovide accurate heat dissipation
źthis product is not a toy and is not intended for children under
the age of three
źuse this product only with compatible devices
MANUFACTURER'S WARRANTY
Warranty conditions are listed in separate document, available at product
website at www.goodram.com/warranty
MANUFACTURER
Wilk Elektronik SA
Mikolowska 42
43-173 Laziska Gorne
Poland
Thank You for choosing GOODRAM product. Before the first use, please read
this user manual to learn about how to use and store this product.
We recommend to retain this manual for future read.
REFERS TO THE FOLLOWING PRODUCTS:
GOODRAM CARD S400
GOODRAM CARD S1A0
and future products from the series
SYMBOL EXPLANATION
Below you will find explanation of symbols used in this manual. Please read
this important information before continuing.
Manufacturer declares that this product, marked with CE sign,
conforms with the essential requirements contained in EU directives
Responsible for CE marking is Wilk Elektronik SA, with its registered
office in Laziska Gorne 43-173, Mikolowska 42, Poland. Copy of the
declaration can be obtained by contacting Wilk Elektronik SA.
This product may not be treated as a household waste. It should
be utilized in appropriate recycling center.
The product can be recycled which means that materials used for its
production can be reused.
The product is not a toy and is not intended for children under
the age of three.
It is forbidden to place the product near the naked flame.
EN