Hoover HBOL 172UK User Manual

Displayed below is the user manual for HBOL 172UK by Hoover which is a product in the Fridges category. This manual has pages.

Related Manuals

Hoover HBOU 172UK Manual

Hoover HBOU 172UK/N Manual

Hoover H3WS4428TAMCE-S Manual

Hoover ND4 H7A2TSBEX-S Manual

Hoover TX48ALG 011 Manual

Hoover F38 PQ Manual

Hoover PU F3860 011 Manual

MAINTENANCE EN

CONTENTS

EN 01

SAFETY INFORMATION ...................................................... 02--02

INSTALLATION .................................................................... 03--03

OPERATION .......................................................................... 03--03

CONSERVATION .................................................................. 04--04

FREEZING ............................................................................ 05--05

DEFROSTING........................................................................ 05--05

MAINTENANCE AND CLEANING ........................................ 06--06

ENERGY SAVINGS .............................................................. 06--06

AVOIDING NOISES .............................................................. 06--06

REVERSIBILITY OF THE DOOR .......................................... 06--07

PRODUCT DIMENSION AND BUILT-IN COMPARTMENT.. 07--08

INSTALLATION OF THE APPLIANCE IN THE COLUMN.... 08--08

COPLING OF THE PANELS OF THE BUILT-IN COLUMN

OF THE APPLIANCE DOORS .............................................. 09--09

PRECAUTIONS FOR THE CORRECT OPERATION .......... 09--09

SUSPENDING USE OF THE APPLIANCE .......................... 09--09

TROUBLESHOOTING .......................................................... 10--10

EN 02

Thank you for purchasing this product.

Before using your refrigerator, please carefully read this instruction manual in order to maximize its performance. Store all documentation for

subsequent use or for other owners. This product is intended solely for household use or similar applications such as:

- the kitchen area for personnel in shops, offi ces and other working environments

- on farms, by clientele of hotels, motels and other environments of a residential type

- at bed and breakfasts (B & B)

- for catering services and similar applications not for retail sale.

This appliance must be used only for purposes of storage of food, any other use is considered dangerous and the manufacturer will not be respon-

sible for any omissions. Also, it is recommended that you take note of the warranty conditions.

The refrigerator contains a refrigerant gas (R600a: isobutane) and insulating gas (cyclopentane), with

high compatibility with the environment, that are, however, inflammable.

We recommend that you follow the following regulations so as to avoid situations dangerous to you:

• Before performing any operation, unplug the power cord from the power socket.

• The refrigeration system positioned behind and inside the refrigerator contains refrigerant. Therefore,

avoid damaging the tubes.

• If in the refrigeration system a leak is noted, do not touch the wall outlet and do not use open flames.

Open the window and let air into the room. Then call a service centre to ask for repair.

• Do not scrape with a knife or sharp object to remove frost or ice that occurs. With these, the refrigerant

circuit can be damaged, the spill from which can cause a fire or damage your eyes.

• Do not install the appliance in humid, oily or dusty places, nor expose it to direct sunlight and to water.

• Do not install the appliance near heaters or inflammable materials.

• Do not use extension cords or adapters.

• Do not excessively pull or fold the power cord or touch the plug with wet hands.

• Do not damage the plug and/or the power cord; this could cause electrical shocks or fires.

• It is recommended to keep the plug clean, any excessive dust residues on the plug can be the cause fire.

• Do not use mechanical devices or other equipment to hasten the defrosting process.

• Absolutely avoid the use of open flame or electrical equipment, such as heaters, steam cleaners,

candles, oil lamps and the like in order to speed up the defrosting phase.

• Do not use or store inflammable sprays, such as spray paint, near the refrigerator. It could cause an

explosion or fire.

• Do not use electrical appliances inside the food storage compartments, unless they are of the type

recommended by the manufacturer.

• Do not place or store inflammable and highly volatile materials such as ether, petrol, LPG, propane gas,

aerosol spray cans, adhesives, pure alcohol, etc. These materials may cause an explosion.

• Do not store medicine or research materials in the refrigerator. When the material that requires a strict

control of storage temperatures is to be stored, it is possible that it will deteriorate or an uncontrolled

reaction may occur that can cause risks.

• Maintain the ventilation openings in the appliance enclosure or in the built-in structure, free of

obstruction.

• Do not place objects and/or containers filled with water on the top of the appliance.

• Do not perform repairs on this refrigerator. All interventions must be performed solely by qualified

personnel.

• This appliance can be used by children aged from 8 years and above and by persons with reduced

physical, sensory or mental capabilities or with a lack of experience and knowledge, provided that they

have been given adequate supervision or instruction concerning how to use the appliance in a safe way

and understand the hazards involved.

Children should not play with the appliance. Cleaning and user maintenance should not be made by

children without supervision.

Turning the knob fully counterclockwise, you will hear a click which corresponds to the switch-off of

the product.

When the appliance is installed, the electrical cord and the current socket must be easily reached.

The socket is compatible with the plug of the appliance. If not, request replacement of the plug

by an authorized technician; do not use extension cords and/or multiple connectors.

Do not touch the internal parts or frozen food with moist or wet hands as it can cause burns.

SAFETY INFORMATION

EN 03

Fig. 2

• The socket is earthed and in compliance with the law.

• The socket can withstand the maximum power load of the appliance, as

indicated on the nameplate of the refrigerator.

• The power supply voltage is within the amounts indicated on the

nameplate of the refrigerator.

• The cord must not be folded or compressed.

• The cord must be checked regularly and replaced solely by authorized

technicians.

• The manufacturer declines any liability whenever these safety

measures are not respected.

Remove all wrapping/packaging present inside the appliance and clean

with water and baking soda or neutral soap.

After the installation, wait 2 - 3 hours to allow time for the refrigerator/

freezer to stabilize at normal working temperature, before placing fresh

or frozen foods inside.

If the power cord becomes disconnected, wait at least five minutes

before restarting the refrigerator/ freezer. At this point, the appliance is

ready for use.

• The thermostat unit for control of the appliance is located inside of the

refrigerator compartment (Fig. 1).

Rotate the thermostat knob of the thermostat beyond the “0” position.

The light is on when the refrigerator door is open. Turning the knob to “0”

completely turns off the product.

• The temperature adjustment of both compartments is effected by

rotating the thermostat knob (Fig. 2).

Select the desired position:

• For colder temperature in the refrigerator and in the freezer, by turning

towards 5.

• For temperature less cold in the refrigerator and in the freezer, by

rotating in the direction of 0.

WARNINGS:

• Do not install the appliance in a damp or wet location as this could

compromise the insulation and result in leakage.

Furthermore, on the exterior of the same, condensate could accumulate

• Do not place the appliance in locations outside or near sources of heat

or exposed to direct sunlight.

The appliance operates properly within the range of environmental

temperatures indicated:

+10 +32’C for the climatic class SN

+16 +32’C for the climatic class N

+16 +38’C for the climatic class ST

+16 +43’C for the climatic class T

(See the nameplate of the product)

• Do not place containers with liquids on top of the appliance.

• Wait at least 3 hours after final placement before placing the appliance

in operation.

After shipping, place the appliance vertically and wait at least 2 - 3 hours

before connecting it to the electrical system. Before inserting the plug

into the electrical socket, make sure that:

Appliance start-up

Turning On/Off (no display)

Temperature adjustment (no display)

OPERATION

Electrical connection

INSTALLATION

Fig.1

This appliance is marked according to the European directive

2012/19/EU on Waste Electrical and Electronic Equipment (WEEE).

WEEE contains both polluting substances (which can cause negative

consequences for the environment) and basic components (which

can be re-used). It is important to have WEEE subjected to

specific treatments, in order to remove and dispose properly all

pollutants, and recover and recycle all materials.

Individuals can play an important role in ensuring that WEEE does not

become an environmental issue; it is essential to follow some basic rules:

- WEEE should not be treated as household waste;

- WEEE should be handed over to the relevant collection points

managed by the municipality or by registered companies. In many

countries, for large WEEE, home collection could be present.

In many countries, when you buy a new appliance, the old one may be

returned to the retailer who has to collect it free of charge on a

one-to-one basis, as long as the equipment is of equivalent type and

has the same functions as the supplied equipment.

By placing the mark on this product, we are confirming

compliance to all relevant European safety, health and environmental

requirements which are applicable in legislation for this product.

Scrapping old appliance

Conformity

EN 04

Fig. 5

Fig. 6

FRIDGE ZONE

CONSERVATION

Refrigerator zone

Practical recommendations

• To maintain the best flavour, nourishment and freshness of foods, it is

advisable to store them in the refrigerator compartment as shown in Fig. 6

below, making sure to wrap them in aluminium or plastic sheets or in

appropriate covered containers to avoid cross-contamination.

Fruit / Vegetables

• To decrease fruit and vegetable moisture losses they must be wrapped in

plastic materials such as, for example, films or bags and then inserted in

the fruit/vegetable zone. In this way rapid deterioration is avoided. NOTE:

If large quantities of food are inserted or the refrigerator door

frequently opened, it is normal for the indicator fails to show

OK. Wait at least 10 h before adjusting the knob to a higher

setting.

Indicator of the temperature in the coldest zone

(not all models)

Some models are equipped with an indicator of the temperature in the

refrigerator compartment in the coldest zone, for you to be able to control

the average temperature.

This symbol indicates the coldest zone of the refrigerator (Fig. 5).

Place food on the shelves in a homogeneous manner to allow air to

circulate properly and to cool it.

• Avoid contact between the food and the far end walls of the refrigerator

compartment.

• Do not introduce hot foods as they can cause deterioration of existing

ones and increase energy consumption.

• Remove the wrappings of foods before inserting them.

• Do not put in dishes or other containers unless previously washed.

•Do not obstruct the cold air ventilator openings with food.

• Do not cover the glass shelf of the vegetable bin to allow for proper air

circulation.

• Do not store bottles in the freezer compartment as they can burst when

frozen.

• ln the case of prolonged power outage, keep the doors closed so that

foods remain cold as long as possible.

• The installation of the appliance in a hot and humid location, with frequent

door openings and storing large amounts of vegetables can cause the

formation of condensate and affect the performance of the unit itself.

• To prevent excessive energy consumption, the frequent or prolonged

opening of the doors is not recommended.

Check that on the indicator of the temperature, the word OK is clearly

shown (Fig. 6). If the word does not appear, this means that the tempera-

ture is too high: adjust the temperature to a cooler setting and wait for

about 10 hours.

Recheck the indicator: if necessary, proceed with a new adjustment.

Fig.4

EN 05

Defrosting the refrigerator compartment

Fig. 7

DEFROSTING

During normal functioning, the refrigerator is automatically defrosted.

There is no need to dry the drops of water present on the rear wall or to

eliminate the frost (depending on functioning).

The water is conveyed to the rear part through the drain hole found there

and the heat of the compressor causes it to evaporate.

• Keep the drainage pipe (Fig. 8) clean in the refrigerator compartment to

keep it free of water.

Defrosting of the fridge compartment occurs automatically in this

product.

A small amount of frost or drops of water on the back of the fridge

compartment when the fridge is working is normal.

Make sure the water outlet is always clean and make sure foods do not

touch the back or sides of the fridge compartment.

Important: if your ambient temperature is high, the appliance may operate continuously, thus building up excessive frost on

the inner wall of the fridge. In this case, turn the fridge knob to a warmer setting (1-2).

(Figure 8)

N.B. Here you will find your appliance rating plate: it includes all the data to be transmitted to the Customer Service should a fault arise.

Fig. 8

EN 06

MAINTENANCE AND CLEANING

ENERGY SAVINGS

AVOIDING NOISES

REVERSIBILITY OF THE DOOR

Lighting

Cleaning

LED lighting

T he p roduct is equipped with LED lights, please contact the Technical

Assistance Service in case of replacement.

Compared to traditional light bulbs, the LEDs last longer and are

environmentally friendly.

NOTICE:

• Before each operation, remove the refrigerator plug from the

power socket to prevent electric shocks.

• Do not pour water directly on the outside or inside of the

refrigerator itself. This could lead to oxidation and damaging of

the electrical insulation.

IMPORTANT:

To prevent cracking of the inside surfaces and plastic parts, follow

these suggestions:

• Wipe away any food oils adhered to plastic components.

• The internal parts, gaskets and external parts can be cleaned with a cloth

with warm water and baking soda or a neutral soap. Do not use solvents,

ammonia, bleach or abrasives.

• Remove the accessories, for example, the shelves, from the refrigerator

and from the door. Wash in hot soapy water. Rinse and thoroughly dry.

• The back of the appliance tends to accumulate dust which can be

eliminated with the use of a vacuum cleaner, after having switched off and

disconnected the appliance from the electrical outlet. This provides greater

energy efficiency.

For better energy savings, we suggest:

• Installing the appliance away from heat sources and not exposed to

direct sunlight and in a well ventilated room.

• Avoid putting hot food into the refrigerator to avoid increasing the

internal temperature and therefore causing continuous functioning of

the compressor.

• Do not excessively stuff foods so as to ensure proper air circulation.

• Defrost the appliance in case there is ice (see DEFROSTING) to

facilitate the transfer of cold.

• ln case of absence of electrical energy, it is advisable to keep the

refrigerator door closed.

• Open or keep the doors of the appliance open as little as possible

• Avoid adjusting the thermostat to temperatures too cold.

• Remove dust present on the rear of the appliance (see CLEANING).

During its operation, the refrigerator emits some absolutely normal noises,

such as:

• HUMMING, the compressor is running.

• RUMBLINGS, RUSTLINGS and HISSING, the refrigerant is flowing

through the tubes.

• TICKS and CLICKS, the operation shutdown of the compressor.

Small measures to r ed uce the vibration nois es:

• Containers touch each other: Avoid contact between containers and

glass recipients.

• Drawers, shelves, bins vibrate: Check the proper installation of internal

accessories.

NOTE:

The refrigerant gas produces noise even when the compressor is off;

it is not a defect, it is normal.

If you hear a clicking sound inside the appliance, it is normal as due to

expansion of the various materials.

The doors of the appliance can be reversed so as to allow the opening to

the right or left according to exigency.

NOTE:

• Inversion of the doors must be performed by qualified technical

personnel.

• Inversion of the doors is not covered by the warranty.

EN 07

REVERSING THE OPENING OF THE DOOR

PRODUCT DIMENSIONS AND BUILT-IN COMPARTMENT

Remove the upper plate and

hinge by screw driver. Remove the upper door.

Reassemble the doors and hinges

workings from bottom to top, from 1-2.

Use the spare hinge and cover

from the accessories bag, and

fit into the left bottom

Remove the right bottom hinge

and left plastic plugs, and refit

them onto the opposite side.

177

1775

1769

1682mm35 52

EN 08

INSTALLATION OF THE APPLIANCE IN THE COLUMN

Insert the appliance into the column, placing it on

the opposite site of the hinges, and make sure 3-5

mm distance gap.

After ensuring the match between appliance door

and column door, then screw the appliance upper

part to the cabinet

Screw the appliance lower part. Fit the seal to the appliance, cut off the

excessive part if necessary. Fit the bottom

parts with plastic covers.

EN 09

SUSPENDING USE OF THE APPLIANCE

COUPLING OF THE PANELS OF THE

BUILT-IN COLUMN OF THE

APPLIANCE DOORS

The appliance is equipped with coupling devices for the appliance doors

with the column panels (loader slide).

Secure the slide in the inner part of the panel of the built-in column at the

desired height and at approx. 20 mm. From the outer wire of the door.

Open the doors of the built-in column and the fridge. Position the built-in

loader in the slide, then fit it into the fridge door.

Mark the fixing points for the screws and drill with a bit of a diameter of

2.5mm.

Connect the appliance door to the cabinet panel keeping the loader slots

as guidelines.

Once the product has been embedded, place the rear part of the

column in contact with the wall so as to prevent access to the compres-

sor compartment.

For the product to operate correctly it is essential to allow adequate air

circulation so as to cool down the condenser located in the rear part of

the appliance.

For this reason, the column must be equipped with a rear chimney,

whose upper opening must not be blocked and with a front slot which

will be covered with a ventilation grill.

If the appliance is not to be used for a long time:

1) Turn the appliance OFF (see Operation).

2) Extract the plug or remove the safety device.

3) Clean the appliance

4) Leave the doors of the appliance open.

PRECAUTIONS FOR THE CORRECT

OPERATION

Size of ther unit cut outs.

Room to leave between the unit and ceiling.

• The model of equipment.

• The number of series.

EN 10

TROUBLESHOOTING

CAUSEPROBLEM REMEDY

The inside illumination light bulb does not

turn on.

The refrigerator and freezer do not suffi

ciently cool.

The food in the refrigerator freezes.

• Electricity absence.

• Door switch is blocked.

• The doors are not closed.

• The doors are frequently opened

• Erroneous setting of the temperature.

• The refrigerator and freezer have been

excessively filled.

• Surrounding temperature is too low.

• No electrical power.

• The power cord is not properly plugged in.

• Check whether the appliance is switched off.

(see Temperature Adjustment).

• Ensure that there is a current in the house.

• Check that it is active.

The motor runs continuously. • The doors are not closed.

• The doors are opened frequently.

• Ambient temperature is very high.

• Thickness of frost than 3mm.

• Make sure the doors are closed and if the seals

close properly.

• Avoid unnecessary open ports for a certain

period.

• Verify that the ambient temperature is in

accordance with the specifications on the

nameplate (see Installation).

• Set the display/thermostat a warmer temperature.

• Defrost the unit (see Defrosting).

Presence of water in the vegetable drawer. • Lack of air circulation.

• Vegetables and fruits with too much moisture.

• Verify that your glass shelf tray vegetables are

not put foods that prevent air circulation.

• Wrap the fruit and vegetable materials plastic

such as, for example, films, bags or containers.

Presence of drops or water on the back wall

of the refrigerator. • Normal operation of the refrigerator. • It is not a defect (see Defrosting).

The bottom of the refrigerator compartment

is wet or droplets are present. The drain tube could be clogged. • Clean the drain tube with a stick or the like to

allow the discharge of water.

• Erroneous setting of the temperature.

• Food in contact with the back wall.

• The freezing of too much fresh food causes a

lowering of the temperature of the refrigerator

• Check the temperature setting (see Temperature

Adjustment) and, if possible, decrease tempera-

ture setting.

• Separate the food from the back wall of the

refrigerator.

• Do not exceed the maximum amount to be

frozen (see Freezing).

• Check that the door and gaskets close

properly.

• Avoid unnecessary opening of the doors for a

period of time.

• Check the temperature setting and, if it is

possible, cool even more (see Temperature

adjustment)

• Wait for the stabilization of the temperature of

the refrigerator or freezer.

• Check that the ambient temperature is in

accordance with what is indicated on the

nameplate (see Installation).

• The power cord is not properly plugged in.

• Check whether the appliance is switched off

(see Temperature adjustment)

• Ensure that in the home there is current.

IF YOU ARE NOT SOLVED THE PROBLEM, CONTACT THE SERVICE CENTER, PLEASE GIVE THE TYPE OF FAULT AND THE INFORMATION

ON THE PLATE OF THIS APPARATUS TO INSIDE THE REFRIGERATOR COMPARTMENT:

07/2017

Table of Contents

Hoover HBOL 172UK User Manual

Related Manuals