Table of Contents
- Get started
- Connect your printer
- Before you begin
- Connect your printer to a Wi-Fi network using HP Smart
- Connect your printer to a Wi-Fi network with a router
- Connect your printer to a Wi-Fi network using Wi-Fi Protected Setup (WPS)
- Connect your printer to an Ethernet network (Ethernet model only)
- Connect your printer using a USB cable
- Change the connection type
- Load media and paper basics
- Copy, Scan, and Mobile Fax
- Configure your printer
- Manage ink and printheads
- Solve a problem
- HP EcoSolutions (HP and the Environment)
- Technical information
- Specifications
- Regulatory notices
- Regulatory Model Number
- FCC statement
- Power cord instructions
- VCCI (Class B) compliance statement for users in Japan
- Notice to users in Japan about the power cord
- Visual display workplaces statement for Germany
- Noise emission statement for Germany
- European Union and United Kingdom Regulatory Notice
- Declaration of conformity
- Regulatory wireless statements
- Accessibility
- Environmental product stewardship program
- HP tips for reducing environmental impact
- Eco-Tips
- European Union Commission Regulation 1275/2008
- Paper
- Plastics
- Safety data sheets
- Recycling program
- HP inkjet supplies recycling program
- Power consumption
- Disposal of waste equipment by users
- Waste disposal for Brazil
- Chemical substances
- The Table of Hazardous Substances/Elements and their Content (China)
- Declaration of the Presence Condition of the Restricted Substances Marking (Taiwan)
- Restriction of hazardous substance (India)
- Restriction on hazardous substances statement (Turkey)
- EPEAT
- SEPA Ecolabel User Information (China)
- China Energy Label for Printer, Fax and Copier
- Battery disposal in Taiwan
- European Union Battery Directive
- Battery notice for Brazil
- California Perchlorate Material Notice
HP 675 User Manual
Displayed below is the user manual for 675 by HP which is a product in the Multifunctionals category. This manual has pages.
Related Manuals
User Guide
HP Smart Tank series
HP Smart Tank
660-670 series
HP Smart Tank
710-720 series
HP Smart Tank
750 series
HP company notices
Copyright and License
THE INFORMATION CONTAINED HEREIN IS
SUBJECT TO CHANGE WITHOUT NOTICE.
ALL RIGHTS RESERVED. REPRODUCTION,
ADAPTATION, OR TRANSLATION OF THIS
MATERIAL IS PROHIBITED WITHOUT PRIOR
WRITTEN PERMISSION OF HP, EXCEPT AS
ALLOWED UNDER THE COPYRIGHT LAWS. THE
ONLY WARRANTIES FOR HP PRODUCTS AND
SERVICES ARE SET FORTH IN THE EXPRESS
WARRANTY STATEMENTS ACCOMPANYING SUCH
PRODUCTS AND SERVICES. NOTHING HEREIN
SHOULD BE CONSTRUED AS CONSTITUTING AN
ADDITIONAL WARRANTY. HP SHALL NOT BE
LIABLE FOR TECHNICAL OR EDITORIAL ERRORS
OR OMISSIONS CONTAINED HEREIN.
© Copyright 2021 HP Development Company,
L.P.
Trademark Credits
Microsoft and Windows are either registered
trademarks or trademarks of Microsoft
Corporation in the United States and/or other
countries.
Mac, OS X, macOS, and AirPrint are trademarks
of Apple Inc., registered in the U.S. and other
countries.
ENERGY STAR and the ENERGY STAR mark
are registered trademarks owned by the U.S.
Environmental Protection Agency.
Android and Chromebook are trademarks of
Google LLC.
iOS is a trademark or registered trademark of
Cisco in the U.S. and other countries and is used
under license.
Safety information
Always follow basic safety precautions when
using this product to reduce risk of injury from
re or electric shock.
- Read and understand all instructions in the
documentation that comes with the printer.
- Observe all warnings and instructions marked
on the product.
- Unplug this product from wall outlets before
cleaning.
- Do not install or use this product near water,
or when you are wet.
- Install the product securely on a stable
surface.
- Install the product in a protected location
where no one can step on or trip over the line
cord, and the line cord cannot be damaged.
- If the product does not operate normally, see
Solve a problem in this guide.
- There are no user-serviceable parts inside.
Refer servicing to qualied service personnel.
Table of contents
1 Get started .............................................................................................................................................................................1
Printer views ......................................................................................................................................................................1
Printer front views .....................................................................................................................................................1
Printer rear view ........................................................................................................................................................2
Printer inner view.......................................................................................................................................................3
Control panel features....................................................................................................................................................... 4
Overview of buttons and lights .................................................................................................................................4
Control panel display icons........................................................................................................................................5
Understand control panel lights and display icons...........................................................................................................7
Control panel error codes ..........................................................................................................................................7
Power button light.....................................................................................................................................................8
Document icon and paper errors...............................................................................................................................9
Printhead icons and errors ........................................................................................................................................9
Printheads alignment icon.......................................................................................................................................10
Ink icons and errors .................................................................................................................................................11
Wi-Fi status, light, and icons ...................................................................................................................................12
Perform common tasks on the printer control panel .....................................................................................................12
Print reports from the printer control panel...................................................................................................................13
To print the printer information page .....................................................................................................................14
To print other reports ..............................................................................................................................................14
Change printer settings ...................................................................................................................................................14
To change printer settings from the embedded web server (EWS)........................................................................15
To change printer settings from HP Smart (iOS, Android, and Windows 10)..........................................................15
Use the HP printer software ...........................................................................................................................................15
To install HP printer software and open the software............................................................................................15
Use the HP Smart app to print, scan, and manage .........................................................................................................15
To install HP Smart and open the app .....................................................................................................................16
Get more information about HP Smart ...................................................................................................................16
2 Connect your printer ............................................................................................................................................................17
Before you begin..............................................................................................................................................................17
Connect your printer to a Wi-Fi network using HP Smart...............................................................................................17
Connect your printer to a Wi-Fi network with a router ...................................................................................................18
Connect your printer to a Wi-Fi network using HP printer software ......................................................................18
Connect your printer to a Wi-Fi network using Wi-Fi Protected Setup (WPS) ................................................................19
Connect your printer to an Ethernet network (Ethernet model only) ............................................................................19
Connect your printer using a USB cable ..........................................................................................................................20
Change the connection type............................................................................................................................................20
USB to a wireless connection...................................................................................................................................20
v
Wireless to a USB connection ..................................................................................................................................21
3 Load media and paper basics ..............................................................................................................................................22
Load paper .......................................................................................................................................................................22
To load standard paper ............................................................................................................................................22
To load legal paper...................................................................................................................................................25
To load an envelope.................................................................................................................................................28
To load cards and photo paper ................................................................................................................................29
Load original ....................................................................................................................................................................30
To load an original on the scanner glass .................................................................................................................30
To load an original in the document feeder (some printer models) .......................................................................31
Change the paper settings from the embedded web server (EWS)................................................................................32
Paper basics.....................................................................................................................................................................32
Recommended papers for printing .........................................................................................................................32
Order HP paper supplies ..........................................................................................................................................34
4 Print......................................................................................................................................................................................35
Print from a Windows computer......................................................................................................................................35
Print from a Mac computer..............................................................................................................................................35
Print with mobile devices ................................................................................................................................................35
Print while connected to same Wi-Fi network ........................................................................................................36
Print without connecting to same Wi-Fi network (Wi-Fi Direct) .............................................................................36
5 Copy, Scan, and Mobile Fax .................................................................................................................................................38
Copy from the printer ......................................................................................................................................................38
Copy an identication (ID) card (some printer models) ..................................................................................................38
Scan using the HP Smart app (iOS, Android, Windows 10, and macOS) .........................................................................40
Scan using the HP printer software.................................................................................................................................40
Scan from a computer .............................................................................................................................................40
Change scan settings (Windows).............................................................................................................................41
Create a new scan shortcut (Windows) ...................................................................................................................41
Scan using Webscan ........................................................................................................................................................42
To enable Webscan ..................................................................................................................................................42
To scan using Webscan ............................................................................................................................................42
Tips for successful scanning and copying .......................................................................................................................42
Mobile Fax ........................................................................................................................................................................43
Use Mobile Fax in the HP Smart app........................................................................................................................43
6 Congure your printer..........................................................................................................................................................44
Congure the printer using the embedded web server (EWS)........................................................................................44
To access and use EWS ............................................................................................................................................44
Congure IP network settings .................................................................................................................................45
Assign or change the system password using the embedded web server (EWS) ..................................................46
Update the printer ...........................................................................................................................................................46
To update the printer or change the settings from the embedded web server (EWS)...........................................47
vi
Use Web Services .............................................................................................................................................................47
To set up Web Services using the embedded web server (EWS).............................................................................47
To remove Web Services using the embedded web server (EWS) ..........................................................................47
7 Manage ink and printheads .................................................................................................................................................48
Check the ink levels .........................................................................................................................................................48
To check the estimated ink levels from the printer software (Windows)...............................................................48
Rell ink tanks .................................................................................................................................................................48
To rell the ink tanks ...............................................................................................................................................48
Order ink supplies ............................................................................................................................................................51
Print with black ink only (Windows) ................................................................................................................................51
Improve print quality .......................................................................................................................................................52
To print a print quality diagnostics page (Windows) ..............................................................................................52
Understand the print quality diagnostics page.......................................................................................................53
Align and clean printheads ..............................................................................................................................................53
To align or clean the printheads from the embedded web server (EWS) ...............................................................54
To align or clean the printheads (Windows)............................................................................................................54
Clean printer.....................................................................................................................................................................54
To clean the printer from the printer software (Windows) .....................................................................................54
Tips for working with ink and printheads........................................................................................................................55
Printhead tips...........................................................................................................................................................55
Ink tips......................................................................................................................................................................55
Move printer ....................................................................................................................................................................55
8 Solve a problem ...................................................................................................................................................................56
Jams and paper-feed issues............................................................................................................................................56
Clear a paper or print carriage jam..........................................................................................................................56
Learn how to avoid paper jams................................................................................................................................62
Solve paper-feed problems .....................................................................................................................................62
Printhead problem...........................................................................................................................................................64
To verify the printheads are installed properly.......................................................................................................65
To clean printhead contacts.....................................................................................................................................66
Printing issues .................................................................................................................................................................68
To resolve print issues (Windows) ...........................................................................................................................68
To resolve print issues (macOS)...............................................................................................................................70
Copy and scan issues .......................................................................................................................................................70
Network and connection issues.......................................................................................................................................71
Fix network connection issues ................................................................................................................................71
Fix Wi-Fi Direct connection issues ...........................................................................................................................71
Fix Ethernet connection issues (some printer models) ..........................................................................................71
Restore original factory defaults and settings ...............................................................................................................72
To restore printer factory defaults from the printer control panel ........................................................................72
To restore the printer network settings from the printer control panel ................................................................72
To restore the printer factory settings or network settings from the embedded web server (EWS) ....................72
Solve Web Services problems..........................................................................................................................................72
vii
Printer hardware issues...................................................................................................................................................73
Maintain the printer.........................................................................................................................................................74
Clean the scanner glass ...........................................................................................................................................74
Clean the document feeder glass area (some printer models)...............................................................................75
Clean the exterior ....................................................................................................................................................75
Clean the document feeder (some printer models)................................................................................................75
HP support .......................................................................................................................................................................77
Contact HP................................................................................................................................................................77
Register printer........................................................................................................................................................77
Additional warranty options....................................................................................................................................78
9 HP EcoSolutions (HP and the Environment)........................................................................................................................79
Power Management.........................................................................................................................................................79
Sleep mode ..............................................................................................................................................................79
Auto-O ...................................................................................................................................................................79
To change the time for Sleep mode and Auto-O from the embedded web server (EWS)....................................79
Schedule On and O.................................................................................................................................................80
Quiet Mode.......................................................................................................................................................................80
To turn Quiet mode on or o or change the settings from the embedded web server (EWS) ...............................80
Appendix A Technical information..........................................................................................................................................81
Specications...................................................................................................................................................................81
Regulatory notices...........................................................................................................................................................83
Regulatory Model Number.......................................................................................................................................83
FCC statement..........................................................................................................................................................83
Power cord instructions...........................................................................................................................................83
VCCI (Class B) compliance statement for users in Japan.........................................................................................84
Notice to users in Japan about the power cord.......................................................................................................84
Visual display workplaces statement for Germany ................................................................................................84
Noise emission statement for Germany..................................................................................................................84
European Union and United Kingdom Regulatory Notice .......................................................................................84
Declaration of conformity........................................................................................................................................84
Regulatory wireless statements .............................................................................................................................85
Accessibility .....................................................................................................................................................................88
Environmental product stewardship program................................................................................................................88
HP tips for reducing environmental impact ............................................................................................................89
Eco-Tips....................................................................................................................................................................89
European Union Commission Regulation 1275/2008.............................................................................................89
Paper .......................................................................................................................................................................89
Plastics.....................................................................................................................................................................89
Safety data sheets...................................................................................................................................................90
Recycling program...................................................................................................................................................90
HP inkjet supplies recycling program......................................................................................................................90
Power consumption.................................................................................................................................................90
Disposal of waste equipment by users ...................................................................................................................90
Waste disposal for Brazil .........................................................................................................................................90
Chemical substances ...............................................................................................................................................91
viii
The Table of Hazardous Substances/Elements and their Content (China).............................................................91
Declaration of the Presence Condition of the Restricted Substances Marking (Taiwan) .......................................92
Restriction of hazardous substance (India).............................................................................................................93
Restriction on hazardous substances statement (Turkey) .....................................................................................93
EPEAT .......................................................................................................................................................................93
SEPA Ecolabel User Information (China)..................................................................................................................93
China Energy Label for Printer, Fax and Copier .......................................................................................................93
Battery disposal in Taiwan.......................................................................................................................................94
European Union Battery Directive ...........................................................................................................................94
Battery notice for Brazil...........................................................................................................................................94
California Perchlorate Material Notice ....................................................................................................................94
ix
x
Get started1
This section describes the printer parts, control panel features, and other printer functionalities.
Printer views
This topic describes the printer parts.
Printer front views
NOTE: The printer images and details may vary depending on your printer model and country/region.
Table 1-1 Printer front view -1
Feature Description
1Document feeder cover
2Document feeder input tray
3Document feeder output extender
4Scanner lid
5Ink tanks
6Paper-width guides
7Input tray
8Removable tray cover (dust cover)
(some printer models)
Get started 1
Table 1-2 Printer front view -2
Feature Description
9Scanner lid
10 Document feeder glass
11 Scanner glass
12 Control panel
13 Output tray
14 Output tray extender
15 Ink access door
16 Print carriage
Printer rear view
NOTE: The printer images and details may vary depending on your printer model and country/region.
Table 1-3 Printer rear view
Feature Description
1Rear door
2 Chapter 1 Get started
Table 1-3 Printer rear view (continued)
Feature Description
2Power connection
3USB port
4Ethernet port (Ethernet model only)
Printer inner view
Table 1-4 Printer inner view
Feature Description
1Tank covers
Tank covers enclose the ink tanks on both sides of the printer.
2Tank caps
Tank caps are plugs to seal the opening of the ink tanks.
3Ink tanks
There are four ink tanks. Each tank contains a dierent colored ink: black, yellow, magenta, and
cyan.
4Printhead cover
The printhead cover on the print carriage secures the printheads in the carriage. Make sure the
printhead cover is properly closed to avoid problems such as carriage jams.
CAUTION: After you have set up the printer, do not open the printhead cover unless instructed to do
so.
5Printhead cover button
Press to open the printhead cover.
CAUTION: After you have set up the printer, do not open the printhead cover unless instructed to do
so.
6Ink tubes button
Printer inner view 3
Table 1-4 Printer inner view (continued)
Feature Description
Press to disconnect the ink tubes. To prevent ink leaks or printer damage, you must disconnect the
ink tubes when moving the printer to a dierent location outside of your home or oice after initial
setup.
7Printheads
The printheads are the components in the print mechanism that apply ink to the paper. There are
two printheads: a color printhead and a black printhead.
Printheads alignment is a process of aligning the printheads to improve print quality. See Improve
print quality.
Control panel features
This topic describes the printer control panel features.
Overview of buttons and lights
Table 1-5 Overview of buttons and lights
Feature Button Description
1 Power button Turn the printer on or o.
2 ID Copy button (some printer models) The ID Copy feature allows you to place a card or small-size document
anywhere on the scanner glass to copy both sides onto the same page.
See Copy an identication (ID) card (some printer models).
3 Color Copy button Start a color copy job. To increase the number of copies, press and hold
the button or press it multiple times.
Copying starts 2 seconds after the last button press.
4 Black Copy button Start a black-and-white copy job. To increase the number of copies, press
and hold the button or press it multiple times.
Copying starts 2 seconds after the last button press.
4 Chapter 1 Get started
Table 1-5 Overview of buttons and lights (continued)
Feature Button Description
5 Control panel display Shows the number counter or error codes, dierent copy modes, issues
relating to ink, printheads, or paper, and the network connection status.
For more information on the display icons and error codes, see
Understand control panel lights and display icons.
6 Wi-Fi button Turn on or o the wireless capability of the printer. See Wi-Fi status, light,
and icons.
7 Information button Print an information page. The information page provides a summary of
the printer information and its current status (including network, Wi-Fi
Direct, Web Services, ink, and so on).
8 Resume button Resume a job after a disruption (for example, after loading paper or
clearing a paper jam).
9 Cancel button Stop the current operation.
Control panel display icons
NOTE: For more information on the button lights, display icons, and error codes, see Understand control
panel lights and display icons.
Control panel display icons 5
Table 1-6 Control panel display icons
Feature Icon Description
1 Open Lid light This light turns on in one of the following situations:
●ID Copy mode (some printer models): Open the scanner lid, ip the card, and
then press the copy button that is blinking or lit to copy and print. See Copy
an identication (ID) card (some printer models).
●During printheads alignment: Open the scanner lid, place the printed
alignment page print-side down on the scanner glass, and then press the
blinking copy button to scan the page. See Printheads alignment icon.
2 Attention light Indicates an error or warning state.
3 Number Counter icon Shows the number counter when you are copying documents, changes to the letter
A when the printer is doing printheads alignment, and shows the letter E and a
number when the printer is in an error state.
See Control panel error codes.
4 Document icon
Photo icon
The Document icon appears when the printer is in Document Copy mode, for
copying on plain paper. If the Attention light is on or blinking, it also indicates
paper related errors. See Document icon and paper errors.
The Photo icon appears when the printer is in Photo Copy mode, for copying on
photo paper.
To switch between the two modes, see Perform common tasks on the printer
control panel.
5 ID Copy Front and ID
Copy Back icons (some
printer models)
Indicates the side of the card to place on the scanner glass.
6 Printhead icons A ashing left icon indicates an error related to the color printhead.
A ashing right icon indicates an error related to the black printhead.
7 KYMC and Ink icons The KYMC letters and Ink drops are used to indicate status of the four ink tanks in
the printer.
Each set of icons corresponds to an ink tank: black, yellow, magenta, and cyan.
8 Wi-Fi Direct icon Indicates the current Wi-Fi Direct status.
●On: Wi-Fi Direct is turned on and ready to use.
●O: Wi-Fi Direct is o. See To turn Wi-Fi Direct on or o.
9 Ethernet icon
(Ethernet model only)
●On: Indicates that the printer is connected to the network through a wired
(Ethernet) connection.
●O: No Ethernet cable is connected to the Ethernet port on the printer, or the
printer cannot detect the cable.
6 Chapter 1 Get started
Table 1-6 Control panel display icons (continued)
Feature Icon Description
●Blinks: The printer is connected to an active Ethernet cable, but is not
connected to a network.
See Fix Ethernet connection issues (some printer models).
10 Wi-Fi status icons Shows the Wi-Fi status and signal strength. See Wi-Fi status, light, and icons.
To resolve wireless connection issues, see Network and connection issues.
Understand control panel lights and display icons
This topic describes the printer control panel features.
Control panel error codes
This topic describes the error codes on the printer display.
If the Number Counter icon on the printer display changes to a letter E and a number, the printer is in an error
state. The letter E and the number work as error codes.
Table 1-7 Control panel error codes
Error code Cause Solution
E1/E2 Paper size mismatch (E1) or Paper
length mismatch (E2) has occurred.
When printing, the printer detects
that the paper size of the printing
job does not match the width or
length of the paper loaded.
1. Press the Cancel button to cancel printing.
2. Load paper that matches the size of the page you want to print, or
change the paper size settings in your application to match the size of
the paper you are using.
3. Print the document again.
To change the paper size, see Change the paper settings from the
embedded web server (EWS).
E3 The carriage inside the printer has
stalled.
1. Lift the ink access door.
2. Make sure the printhead cover is properly closed and the print carriage
is not obstructed. Do not open the printhead cover.
3. Remove any jammed paper or other objects blocking the carriage.
4. Close the ink access door.
5. Press the Resume button to continue printing or press the
Cancel button .
For more information, see Jams and paper-feed issues.
E4 There is a paper jam. Clear the jam, and then press the Resume button to continue
printing.
Understand control panel lights and display icons 7
Table 1-7 Control panel error codes (continued)
Error code Cause Solution
For more information, see Jams and paper-feed issues.
CAUTION: Do not open the printhead cover.
E5 The scanner is not working. Turn the printer o, and then on again.
If the problem persists, contact HP. The printer can still print even if the
scanner is not working.
E6 The printer is in an error state. Restart the printer.
1. Turn o the printer.
2. Unplug the power cord.
3. Wait a minute, and then plug the power cord back in.
4. Turn on the printer.
If the problem persists, contact HP.
E7 One or more ink tanks are out of ink. Rell the indicated ink tank that is out of ink. See To rell the ink tanks.
E8 Fatal error. Turn the printer o, and then on again.
If the problem persists, contact HP.
E9 Firmware update error. Turn the printer o, and then on again.
If the problem persists, contact HP.
Power button light
Status Cause and Solution
On The printer is on.
O The printer is powered o.
Dimmed The printer is in Sleep mode. See Sleep mode.
Blinking The printer is turning on or o, or processing a job.
To cancel the job, press the Cancel button .
Fast blinking If the ink access door is open, close it.
If the ink access door is closed and the light is blinking
fast, the printer is in an error state. Check your computer
or device for any messages that can help provide more
information. If need, try printing a page to generate an
onscreen message.
8 Chapter 1 Get started
Document icon and paper errors
For errors relating to paper mismatch or jams, see Control panel error codes.
●The Attention light and Document icon are blinking.
The Resume light and Cancel light are on.
Cause Solution
The printer receives a printing job, and detects that there
is no paper in the input tray. Load paper, and then press the Resume button to
continue printing. See Load paper.
●The Attention light and Document icon are blinking.
The Resume light is o. The Cancel light could be on.
Cause Solution
There is a paper jam in the document feeder, or the
original is not inserted properly into the document feeder.
NOTE: The document feeder is only available in some
printer models.
If the Cancel light is on, press the Cancel button .
For more information, see Jams and paper-feed issues
and To load an original in the document feeder (some
printer models).
Printhead icons and errors
●The Attention light and one or both the Printhead icons are blinking.
Document icon and paper errors 9
Cause Solution
One of the following might have occurred:
–One or both printheads are missing.
–One or both printheads are installed incorrectly.
–One or both printheads still have an orange plug or
plastic tape on them.
–One or both printheads are incompatible or
damaged.
–Make sure both printheads are properly installed.
–Install any missing printhead.
–If both printheads are installed, remove the
printhead indicated, make sure there is no orange
plug or plastic tape on it, and then reinsert the
printhead securely.
–Make sure that you are using the correct HP
printheads for your printer.
For more information, see Printhead problem.
NOTE: Do not open the printhead cover unless
instructed to do so.
Printheads alignment icon
●The Number Counter icon shows an A or a blinking A, or a “racecourse animation”.
Cause Solution
The printer is doing printheads alignment.
A racecourse animation appears on the display when the
printer is printing a printheads alignment page.
A solid "A" appears when the alignment page is printed.
A blinking "A" appears when the printer is scanning the
alignment page.
"A" disappears after the scan when printheads alignment
is complete.
After the alignment page is printed and the Open Lid
light blinks, place the printed page print-side
down on the scanner glass, close the scanner lid, and
then press the blinking copy button to scan the page.
Printheads alignment is complete after the scan.
To load an original. see Load paper.
●The Number Counter icon shows a blinking A. The Attention light and Resume light are blinking.
10 Chapter 1 Get started
Cause Solution
Printheads alignment failed. This occurs after you have
scanned the alignment page.
Try one of the following:
–Press one of the copy buttons to rescan the
alignment page.
–Press the Resume button to reprint the
alignment page.
If you do not do anything, printheads alignment
gets canceled after some time.
Ink icons and errors
To ll ink tanks, see Rell ink tanks.
●One or more Ink icons and the Resume light are on.
Cause Solution
One or more ink tanks are low on ink. Rell the indicated ink tank.
●The Attention light is on, one or more Ink icons are blinking, and the Resume light is on.
Cause Solution
One or more ink tanks are very low on ink. Rell the indicated ink tank.
●The Attention light, error code E7, and one or more Ink icons are blinking.
Cause Solution
One or more ink tanks are out of ink. Rell the indicated ink tank.
Ink icons and errors 11
Wi-Fi status, light, and icons
The Wi-Fi light and the wireless status icons on the control panel display work together to indicate the status
of a wireless connection.
Table 1-8 Wi-Fi status, light, and icons
Wi-Fi light Wi-Fi icons Wi-Fi status
O O The printer is not connected to the Wi-Fi network.
To turn on Wi-Fi, press the Wi-Fi button .
To connect the printer to a Wi-Fi network, see Connect your printer
to a Wi-Fi network using HP Smart or Connect your printer to a Wi-Fi
network using Wi-Fi Protected Setup (WPS).
On
On
The printer is connected to a Wi-Fi network.
Blinks
On (signal bars cycle)
The printer is in Wi-Fi setup mode or is trying to connect to a Wi-Fi
network.
A blinking Wi-Fi light indicates that the printer is not connected to
a network or is trying to connect. During setup, it also indicates
the printer is in Wi-Fi setup mode. If the setup mode times out
after some time, you can restart it by restoring the printer network
settings. See Restore original factory defaults and settings.
Blinks
On (signal bars cycle)
The printer is unable to connect to a Wi-Fi network.
To resolve wireless connection issues, see Network and connection
issues.
Blinks
Blinks
The printer is in WPS mode. See Connect your printer to a Wi-Fi
network using Wi-Fi Protected Setup (WPS).
Perform common tasks on the printer control panel
To turn on or o the wireless capability of the printer
When the wireless capability of the printer is turned on, the Wi-Fi button on the printer control panel should
be lit.
●If the blue Wi-Fi light is o, press the Wi-Fi button to turn it on.
12 Chapter 1 Get started
●To turn o the Wi-Fi function, press the button again.
To enter Wi-Fi Protected Setup (WPS) Push Button mode
●Press and hold the Wi-Fi button for at least 3 seconds.
NOTE: For the other tasks listed in the following table, be sure to place the printer in support mode before
using any button combinations.
To enter the printer support mode
●Press and hold the Information button for at least 5 seconds.
All button lights on the printer control panel will light up.
To exit the printer support mode
●Press the Cancel button .
All button lights will turn o if there are no printer errors.
Table 1-9 Common tasks from the printer control panel
Task Instructions (must be in support mode)
Turn Wi-Fi Direct on or o Press the Wi-Fi button and the Resume button at the
same time.
Switch between Document Copy and Photo Copy modes Press and hold the Black Copy button and the Color Copy
button at the same time for 3 seconds.
Restore network defaults Press the Wi-Fi button and the Cancel button at the same
time for 5 seconds.
Restore factory defaults Restoring the printer to factory defaults will remove all settings and
functions previously set up on the printer.
With the ink access door open, press and hold the Information
button and the Cancel button for at least 3 seconds.
Print reports from the printer control panel
This topic describes the printer reports and how to print.
Print reports from the printer control panel 13
To print the printer information page
From the printer control panel, press the Information button .
The information page provides a summary of the printer information and its current status (including
network, Wi-Fi Direct, Web Services, ink, and so on).
To print other reports
1. From the printer control panel, place the printer in the support mode. To do so, press and hold the
Information button for 5 seconds until the control panel buttons light up.
2. See the following instructions to print the desired report.
Table 1-10 Print reports
Printer report Description How to print (must be in support mode)
Printer Status Report The page provides a summary of the
printer information, current status, and
settings, including connectivity settings, as
well as print or scan settings and usage.
Press the Resume button .
Wi-Fi Network Test Report
and Network Conguration
Page
Wireless Network Test Report shows the
diagnostics results for the status of the Wi
Fi network, Wi-Fi signal strength, detected
networks, and more.
Network Conguration Page shows the
network status, hostname, network name,
and more.
Press the Information button and the Resume
button at the same time.
Wi-Fi Quick Start Guide Provides instructions to help you connect
your printer to a Wi-Fi network. Press the Information button .
Wi-Fi Direct Guide Provides instructions to help you set up
and use Wi-Fi Direct. Press the Information button and the Cancel
button at the same time.
Web Services Reports Depending on Web Services status,
Web Services Reports provide dierent
instructions to help you turn on Web
Services, set up Web Services, or x
connection issues, and more.
Press the Resume button and the Cancel
button at the same time.
Print Quality Diagnostic
Report
You can print a diagnostics page to
determine if cleaning or aligning the
printheads is recommended to improve
print quality. See To print a print quality
diagnostics page (Windows) .
Press and hold the Color Copy button for 3
seconds.
Change printer settings
NOTE: You can also view or change the printer settings using the HP printer software. See Use the HP
printer software .
14 Chapter 1 Get started
To change printer settings from the embedded web server (EWS)
1. Open EWS. See To access and use EWS.
2. Search for a setting. Or click the desired function or tab, and then select a setting from the left menu.
3. Make the necessary changes.
To change printer settings from HP Smart (iOS, Android, and Windows 10)
1. Open the HP Smart app on your computer or mobile device. See Use the HP Smart app to print, scan, and
manage.
2. Select your printer, and then click or tap Printer Settings.
3. Select the desired option and make the necessary changes.
Use the HP printer software
You can use the HP printer software to change the printer settings, check estimated ink levels, order printing
supplies, maintain the printer, resolve printing issues, and more.
●If you are using the HP Smart app instead of the printer software, see Use the HP Smart app to print, scan,
and manage.
●Each device must have the app or software installed in order to print.
●Windows 7 Service Pack 1 (SP1) is required to install HP printer software.
To install HP printer software and open the software
1. Visit To install HP printer software and open the software to download the software and install on your
computer.
2. Open the software.
●Windows 10: From the computer desktop, click Start, select HP from the app list, and then select the
icon with the printer name.
●Windows 7: From the computer desktop, click Start, select All Programs, click HP, click the folder for
the printer, and then select the icon with the printer name.
Use the HP Smart app to print, scan, and manage
The HP Smart app can help you perform many dierent printer tasks, including the following:
●Set up and connect your printer.
●Print and scan documents and photos.
●Share documents through email and other applications.
●Manage printer settings, check printer status, print reports, and order supplies.
NOTE:
To change printer settings from the embedded web server (EWS) 15
●HP Smart is supported on mobile devices and computers running on iOS, Android, Windows 10, and
macOS (versions 10.14, 10.15, and 11.0).
●The HP Smart app might not be available in all languages. Some features might not be available with all
printer models.
To install HP Smart and open the app
1. Visit To install HP Smart and open the app to download and install HP Smart on your device.
NOTE: iOS, Android, Windows 10, and macOS devices: You can also download HP Smart from the
respective app stores for the device.
2. Open HP Smart after installation.
●iOS/Android: From the mobile device desktop or app menu, tap HP Smart.
●Windows 10: From the computer desktop, click Start, and then select HP Smart from the app list.
●macOS: From the Launchpad, select HP Smart.
3. Connect your printer wirelessly using HP Smart. See Connect your printer to a Wi-Fi network using HP
Smart.
4. When prompted, create an HP account and register the printer.
If prompted for a password during the process, enter the PIN which is available from a label in the ink
access area or cartridge access area.
Get more information about HP Smart
To learn how to connect, print, and scan using HP Smart, visit the website for your device:
●iOS/Android: www.hp.com/go/hpsmart-help
●Windows 10: www.hp.com/go/hpsmartwin-help
●macOS: www.hp.com/go/hpsmartmac-help
16 Chapter 1 Get started
Connect your printer2
This section describes dierent ways to connect your printer.
Before you begin
NOTE:
●To turn on or o the wireless capability of the printer, see Perform common tasks on the printer control
panel .
●To resolve network connection issues, see Fix network connection issues.
Ensure the following:
●The Wi-Fi network is set up and working properly.
●The printer and the computers that use the printer are on the same network (subnet).
While connecting the printer, you might be prompted to enter the Wi-Fi network name (SSID) and a Wi-Fi
password.
●The Wi-Fi network name is the name of your Wi-Fi network.
●The Wi-Fi password prevents other people from connecting to your Wi-Fi network without your
permission. Depending on the level of security required, your Wi-Fi network might use either a WPA
passphrase or WEP key.
If you have not changed the network name or the security passkey since setting up your Wi-Fi network, you
can sometimes nd them on the back or side of the wireless router.
If you cannot nd the network name or the security password or cannot remember this information, see
the documentation provided with your computer or with the wireless router. If you still cannot nd this
information, contact your network administrator or the person who set up the Wi-Fi network.
Connect your printer to a Wi-Fi network using HP Smart
Install the HP Smart app on your computer or mobile device and use the app to set up or connect the printer to
your Wi-Fi network.
For information about HP Smart including where to download the app, see Use the HP Smart app to print,
scan, and manage.
1. Make sure your computer or mobile device is connected to your Wi-Fi network. On your mobile device,
turn on Bluetooth and location services.
NOTE: HP Smart uses Bluetooth for printer setup. It does not support print using Bluetooth.
2. If your printer Wi-Fi was previously turned o, make sure to turn it on. See Perform common tasks on the
printer control panel.
Connect your printer 17
3. If the printer is no longer in Wi-Fi setup mode, restore the printer network settings. See To restore the
printer network settings from the printer control panel.
NOTE: For some printers or models, the purple light will start pulsing on the status light bar or the Wi-
Fi light will blink when the printer is in Wi-Fi setup mode. See Wi-Fi status, light, and icons.
4. Open the HP Smart app on your computer or mobile device. See Use the HP Smart app to print, scan, and
manage.
5. Click or tap the Plus icon or Add Printer, and then choose the option to select or add a printer.
Follow the instructions to add the printer to your network.
6. When prompted, create an HP account and register the printer.
If prompted for a password during the process, enter the PIN which is available from a label in the ink
access area or cartridge access area.
NOTE: When the printer is connected successfully, the Wi-Fi light stops blinking and remains lit.
Connect your printer to a Wi-Fi network with a router
This topic describes how to connect your printer to a Wi-Fi network using a router.
Connect your printer to a Wi-Fi network using HP printer software
To connect the printer to an integrated wireless WLAN 802.11 network, make sure you have the following:
●A wireless 802.11a/b/g/n/ac network that includes a wireless router or access point.
NOTE: The printer supports connections using 2.4GHz and 5GHz.
●A computer that is already connected to the Wi-Fi network that you want to use to connect your printer.
●Network name (SSID).
●WEP key or WPA Passphrase (if needed).
To connect your printer using HP printer software (Windows)
If connecting the printer wirelessly using HP software, place the printer in Wi-Fi setup mode by restoring the
printer network settings. See Restore original factory defaults and settings.
1. In the HP printer software (available from the Start menu), click Tools.
For information about the software, see Use the HP printer software .
2. Click Device Setup & Software.
3. Click Connect a new device.
4. Select Manual Setup, select the wireless option, and then follow the on-screen instructions.
18 Chapter 2 Connect your printer
Connect your printer to a Wi-Fi network using Wi-Fi Protected
Setup (WPS)
This Wi-Fi setup method can be used if your router has a WPS button.
If the router does not have this button, it is recommended that you connect the printer using the HP Smart
app. See Fix network connection issues.
1. Make sure your router and printer are not too far from each other.
2. From the printer control panel, press and hold the Wi-Fi button for at least 3 seconds to start WPS.
3. Press the WPS button on your router.
NOTE:
●Be sure to press the WPS button on the router within 2 minutes.
●When the printer is connected successfully, the Wi-Fi light stops blinking and remains lit.
4. Open the HP Smart app on your computer or mobile device. See Use the HP Smart app to print, scan, and
manage.
5. Click or tap the Plus icon or Add Printer, and then choose the option to select or add a printer.
Follow the instructions to add the printer to your network.
6. When prompted, create an HP account and register the printer.
If prompted for a password during the process, enter the PIN which is available from a label in the ink
access area or cartridge access area.
Connect your printer to an Ethernet network (Ethernet model only)
If your Ethernet network does not have an Internet connection, connect the printer wirelessly to the HP Smart
app. See Connect your printer to a Wi-Fi network using HP Smart.
1. Make sure your computer is connected to the router.
2. Connect your printer and router using an Ethernet cable. (Ethernet cable sold separately.)
NOTE:
●The Wi-Fi connection is automatically disabled when you connect the Ethernet cable.
●To connect the printer wirelessly, disconnect the Ethernet cable and connect the printer to your Wi-Fi
network using HP Smart. See Connect your printer to a Wi-Fi network using HP Smart.
3. Open the HP Smart app on your computer. See Use the HP Smart app to print, scan, and manage.
Connect your printer to a Wi-Fi network using Wi-Fi Protected Setup (WPS) 19
4. Click or tap the Plus icon or Add Printer, and then choose the option to select or add a printer.
Follow the instructions to add the printer to your network.
5. When prompted, create an HP account and register the printer.
If prompted for a password during the process, enter the PIN which is available from a label in the ink
access area or cartridge access area.
Connect your printer using a USB cable
1. If necessary, remove the label covering the USB port at the back of the printer.
2. Connect the printer and computer using a USB cable.
3. Open the HP Smart app on your computer. See Use the HP Smart app to print, scan, and manage.
4. Click or tap the Plus icon or Add Printer, and then choose the option to select or add a printer.
Follow the instructions to add the printer.
5. When prompted, create an HP account and register the printer.
If prompted for a password during the process, enter the PIN which is available from a label in the ink
access area or cartridge access area.
Change the connection type
This topic describes how to change the way to connect your printer.
USB to a wireless connection
Windows 10/macOS
1. Unplug the USB cable from the printer.
2. Make sure your computer or mobile device is connected to your Wi-Fi network. On your mobile device,
turn on Bluetooth and location services.
3. If your printer Wi-Fi was previously turned o, make sure to turn it on. For more information about Wi-Fi
status, see Wi-Fi status, light, and icons.
4. If the printer is no longer in Wi-Fi setup mode, restore the printer network settings. See To restore the
printer network settings from the printer control panel.
5. Open the HP Smart app on your computer or mobile device. See Use the HP Smart app to print, scan, and
manage.
6. When prompted, create an HP account and register the printer.
If prompted for a password during the process, enter the PIN which is available from a label in the ink
access area or cartridge access area.
7. Follow the on-screen instructions to connect the printer to your Wi-Fi network.
20 Chapter 2 Connect your printer
Windows 7
1. Open the HP printer software.
If you have not installed the HP printer software on your computer, visit 123.hp.com to download and
install the printer software.
NOTE: Windows 7 Service Pack 1 (SP1) is required to install HP printer software.
2. In the printer software, click Tools, and then click Device Setup & Software.
3. Select Convert a USB connected device to wireless. Follow the on-screen instructions.
Wireless to a USB connection
Windows/macOS
1. If necessary, remove the label covering the USB port at the back of the printer.
2. Connect the printer and computer using a USB cable.
3. Open the HP Smart app on your computer. See Use the HP Smart app to print, scan, and manage.
4. Click or tap the Plus icon or Add Printer, and then choose the option to select or add a printer.
Follow the instructions to add the printer.
5. When prompted, create an HP account and register the printer.
If prompted for a password during the process, enter the PIN which is available from a label in the ink
access area or cartridge access area.
Windows 7 21
Load media and paper basics3
This section describes how to change paper settings and to load dierent media into the printer.
Load paper
This topic describes how to load paper into the input tray.
NOTE:
●Do not load paper while the printer is printing.
●If there is other paper in the input tray, remove the paper before loading a dierent paper type or size.
●When prompted after loading paper, change the paper settings on the printer control panel to match the
paper you are using.
●The printer images and details may vary depending on your printer model and country/region.
●For the media supported by your printer, refer to the printer software or the embedded web server
(EWS). To open EWS, see To access and use EWS.
To load standard paper
1. Open the input tray.
22 Chapter 3 Load media and paper basics
2. Press and hold the button on the paper-width guide, and then slide the guides to the edges of the tray.
3. Insert the paper in portrait orientation and with the side to be printed facing down.
Make sure the stack of paper is aligned with the appropriate paper size lines in the tray. Also, make sure
the stack of paper does not exceed the stack-height marking in the tray.
To load standard paper 23
4. Adjust the paper-width guides until they touch the edges of the stack of paper.
5. Close the input tray.
24 Chapter 3 Load media and paper basics
6. Pull out the output tray extender.
To load legal paper
1. Open the input tray.
2. Press and hold the button on the paper-width guide, and then slide the guides to the edges of the tray.
3. Extend the input tray.
NOTE: Printer models with an open input tray do not require the input tray to be extended.
a. Press and hold the button on the front edge of the input tray and extend the tray.
b. For printer models with a removable tray cover (dust cover), press the buttons at the bottom of the
tray towards you to release and remove the cover.
After printing is done, remember to reinsert the cover.
To load legal paper 25
4. Insert the paper in portrait orientation and with the side to be printed facing down.
Make sure the stack of paper is aligned with the appropriate paper size lines in the tray. Also, make sure
the stack of paper does not exceed the stack-height marking in the tray.
26 Chapter 3 Load media and paper basics
5. Adjust the paper-width guides until they touch the edges of the stack of paper.
6. Close the input tray.
NOTE: When you reinsert the tray, the extended part is expected to remain outside the printer.
7. Pull out the output tray extender.
To load legal paper 27
To load an envelope
1. Open the input tray.
2. Press and hold the button on the paper-width guide, and then slide the guides to the edges of the tray.
3. Insert the envelope in portrait orientation and with the side to be printed facing down.
Make sure the stack of paper is aligned with the appropriate paper size lines in the tray. Also, make sure
the stack of paper does not exceed the stack-height marking in the tray.
4. Adjust the paper-width guides until they touch the edges of the stack of paper.
5. Close the input tray.
6. Pull out the output tray extender.
28 Chapter 3 Load media and paper basics
To load cards and photo paper
1. Open the input tray.
2. Press and hold the button on the paper-width guide, and then slide the guides to the edges of the tray.
3. Insert the cards or photo paper in portrait orientation and with the side to be printed facing down.
Make sure the stack of paper is aligned with the appropriate paper size lines in the tray. Also, make sure
the stack of paper does not exceed the stack-height marking in the tray.
4. Adjust the paper-width guides until they touch the edges of the stack of paper.
5. Close the input tray.
6. Pull out the output tray extender.
To load cards and photo paper 29
Load original
This topic describes how to load an original into the printer.
To load an original on the scanner glass
1. Lift the scanner lid.
2. Load the original print-side down on the scanner glass (aligned to the indicated corner).
3. Close the scanner lid.
30 Chapter 3 Load media and paper basics
To load an original in the document feeder (some printer models)
1. Open the document feeder output tray extender.
2. Open the document feeder input tray.
3. Slide the paper-width guides outwards.
4. Load original print-side up in the document feeder.
To load an original in the document feeder (some printer models) 31
5. Slide the paper-width guides inward until they stop at the edge of the paper.
Change the paper settings from the embedded web server (EWS)
NOTE: For your security, some settings in the embedded web server (EWS) are password-protected. Enter
the password if prompted. This is the password you have set in the EWS or the default PIN on a label in the
ink access area.
1. Open EWS. See To access and use EWS.
2. Click the Settings tab.
3. From the left menu, click Preferences.
4. Click Tray and Paper Management, and then make the necessary changes.
5. Click Apply.
Paper basics
The printer is designed to work well with most types of oice paper. It is best to test a variety of print paper
types before buying large quantities.
Use HP paper for optimum print quality. Visit the HP website at www.hp.com for more information about HP
paper.
HP recommends plain papers with the ColorLok logo for printing everyday
documents. All papers with the ColorLok logo are independently tested to meet
high standards of reliability and print quality, and produce documents with crisp,
vivid color, bolder blacks, and that dry faster than ordinary plain papers. Look for
papers with the ColorLok logo in a variety of weights and sizes from major paper
manufacturers.
Recommended papers for printing
If you want the best print quality, HP recommends using HP papers that are specically designed for the type
of project you are printing. Depending on your country/region, some of these papers might not be available.
32 Chapter 3 Load media and paper basics
Photo printing
●HP Advanced Photo Paper
This glossy photo paper features an instant-dry nish for easy handling without smudging. It resists
water, smears, ngerprints, and humidity. Your prints have a look and feel comparable to a store
processed photo. It is available in several sizes, including A4, 8.5 x 11 inches, 10 x 15 cm (4 x 6 inches), 13
x 18 cm (5 x 7 inches). It is acid-free for longer lasting documents.
●HP Everyday Photo Paper
Print colorful, everyday snapshots at a low cost, using paper designed for casual photo printing. This
aordable photo paper dries quickly for easy handling. Get sharp, crisp images when you use this paper
with any inkjet printer. It is available in glossy nish in several sizes, including A4, 8.5 x 11 inches, 5 x 7
inches, and 4 x 6 inches (10 x 15 cm). It is acid-free for longer lasting documents.
●HP Photo Value Packs
HP Photo Value Packs conveniently package original HP ink cartridges and HP Advanced Photo Paper to
save you time and take the guesswork out of printing aordable, lab-quality photos with your HP printer.
Original HP inks and HP Advanced Photo Paper have been designed to work together so your photos are
long lasting and vivid, print after print. Great for printing out an entire vacation's worth of photos or
multiple prints to share.
Business documents
●HP Enhanced Laser Matte Paper 150g
This paper is a heavy matte laser paper, ideal for printing professional-color marketing materials
including brochures.
●HP Brochure Paper 180g Glossy or HP Professional Paper 180 Glossy
These papers are glossy-coated on both sides for two-sided use. They are the perfect choice for near
photographic reproductions and business graphics for report covers, special presentations, brochures,
mailers, and calendars.
Everyday printing
All the papers listed for everyday printing feature ColorLok Technology for less smearing, bolder blacks, and
vivid colors.
●HP Bright White Inkjet Paper
HP Bright White Inkjet Paper delivers high-contrast colors and sharp text. It is opaque enough for
two-sided color usage with no show-through, which makes it ideal for newsletters, reports, and yers.
●HP Printing Paper
HP Printing Paper is a high-quality multifunction paper. It produces documents that look and feel more
substantial than documents printed on standard multipurpose or copy paper. It is acid-free for longer
lasting documents.
●HP Oice Paper
HP Oice Paper is a high-quality multifunction paper. It is suitable for copies, drafts, memos, and other
everyday documents. It is acid-free for longer lasting documents.
Recommended papers for printing 33
●HP Oice Recycled Paper
HP Oice Recycled Paper is a high-quality multifunction paper made with 30% recycled ber.
Order HP paper supplies
The printer is designed to work well with most types of oice paper. Use HP paper for optimum print quality.
To order HP papers and other supplies, go to www.hp.com. At this time, some portions of the HP website are
available in English only.
HP recommends plain papers with the ColorLok logo for printing and copying of everyday documents. All
papers with the ColorLok logo are independently tested to meet high standards of reliability and print quality,
and produce documents with crisp, vivid color, bolder blacks and shorter dry-time than ordinary plain papers.
Look for papers with the ColorLok logo in a variety of weights and sizes from major paper manufacturers.
34 Chapter 3 Load media and paper basics
Print4
This section describes how to print from dierent devices.
This printer is designed to work with the HP Smart app, a software application that makes it easy to print,
scan, and manage your printer from a smartphone, laptop, desktop computer, or other devices.
You can print and manage the printer from all of your devices by installing the app on each device. For more
information about the app, see Use the HP Smart app to print, scan, and manage.
Print from a Windows computer
1. Make sure you have installed the HP Smart. See Use the HP Smart app to print, scan, and manage.
2. Open the document you wish to print.
3. From the File menu in your software program, select the Print option.
4. Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Setup, or
Preferences.
5. Make sure your printer is selected.
6. Change any print settings, and click OK.
7. Click Print or the OK button to print.
Print from a Mac computer
1. Make sure you have installed the HP Smart app. See Use the HP Smart app to print, scan, and manage.
2. From the computer, open System Preference, and select Printers and Scanners.
3. Click the Add button/icon + , select the printer from the printer list, and then click Add.
4. Once connected, open the document you wish to print and use the Print command.
5. Make sure the desired printer is selected.
6. Change any print settings.
7. Click Print to print the document.
Print with mobile devices
You can use the HP Smart app to print documents and photos from your mobile device, social media account,
or cloud storage.
See Use the HP Smart app to print, scan, and manage.
Print 35
You can also print directly from your mobile devices using AirPrint (iOS) or HP Print Service Plugin (Android):
●iOS: Devices running iOS 4.2 or later have AirPrint pre-installed.
●Android: Download the HP Print Service Plugin from the Google Play Store or your favorite app store, and
then enable it on your device.
NOTE: You can print using HP Smart or AirPrint/HP Print Service Plugin when the mobile device is on the
same network as the printer or a dierent network (using Wi-Fi Direct).
Print while connected to same Wi-Fi network
You can print documents and photos from your mobile device when the device is on the same Wi-Fi network
as the printer.
Visit www.hp.com/go/mobileprinting for more information on mobile printing.
NOTE: Make sure your mobile device and printer are connected to the same Wi-Fi network. See Connect
your printer to a Wi-Fi network using HP Smart.
Print without connecting to same Wi-Fi network (Wi-Fi Direct)
With Wi-Fi Direct, you can directly connect your computer or mobile device to the printer and print wirelessly
—without connecting your computer or mobile device to an existing wireless network.
Visit www.hp.com/go/widirectprinting for more information on Wi-Fi Direct.
NOTE:
●Make sure Wi-Fi Direct on your printer is turned on. When Wi-Fi Direct is turned on, the Wi-Fi Direct
icon should appear on the printer display.
●Up to 5 computers and mobile devices can connect to the printer using Wi-Fi Direct connection.
To turn Wi-Fi Direct on or o
When Wi-Fi Direct is turned on, the Wi-Fi Direct icon should appear on the printer display. If the icon is
o, follow these instructions.
1. From the printer control panel, press and hold the Information button for 5 seconds until the
control panel buttons light up.
2. Press and hold the Wi-Fi button and the Resume button at the same time for 3 seconds.
NOTE: When you turn on Wi-Fi Direct the rst time, the printer automatically prints a Wi-Fi Direct guide.
The guide provides instructions about how to use Wi-Fi Direct. See Print reports from the printer control
panel.
To nd the Wi-Fi Direct name or password
36 Chapter 4 Print
From the printer control panel, press the Information button to print the printer information page.
NOTE: For other network details, print the network conguration page. See Print reports from the printer
control panel.
To change the Wi-Fi Direct connection security settings for the printer using the embedded web
server (EWS)
1. Open EWS. See To access and use EWS.
2. Click the Network tab.
3. From the left menu, click Wi-Fi Direct, and then click the Edit Settings button.
4. Make the necessary changes.
5. Click Apply.
To change the Wi-Fi Direct connection security settings for the printer using the embedded web server (EWS) 37
Copy, Scan, and Mobile Fax5
This section describes the copy, scan, and use mobile fax features.
Copy from the printer
NOTE: All documents are copied in normal quality print mode. You cannot change the print mode quality
when copying.
1. Load paper in the input tray.
See Load paper.
2. Place the original print-side up in the document feeder or print-side down on the scanner glass (aligned
to the corner with an icon).
See Load original.
3. From the printer control panel, press the Black Copy button or the Color Copy button to start
copying.
To increase the number of copies, press and hold the button or press it multiple times.
Copying starts 2 seconds after the last button press.
Copy an identication (ID) card (some printer models)
The ID Copy feature allows you to place a card or small-size document anywhere on the scanner glass to copy
both sides onto the same page.
1. Load paper in the input tray.
See Load paper.
2. Place the card anywhere on the scanner glass, away from the edges or corners of the glass.
38 Chapter 5 Copy, Scan, and Mobile Fax
3. Close the scanner lid.
4. Press the ID Copy button to enter the ID Copy mode.
The Color Copy button and the Black Copy button will blink or light up.
5. Press either copy button to copy one side of the card.
To increase the number of copies, press and hold the button or press it multiple times.
6. When the Open Lid light blinks or lights up, open the scanner lid, ip the card on the scanner glass,
and then close the scanner lid.
Copy an identication (ID) card (some printer models) 39
7. Press the copy button that is blinking or lit to copy the other side.
8. Wait for the page to print.
Scan using the HP Smart app (iOS, Android, Windows 10, and
macOS)
You can use the HP Smart app to scan documents or photos from the printer's scanner, and you can also scan
using your device camera. HP Smart includes editing tools that allow you to adjust the scanned image before
saving or sharing. You can print, save your scans locally or in cloud storage, and share them via email, SMS,
Facebook, Instagram, etc. To scan with HP Smart, follow the instructions provided in the appropriate URLs
below, depending on the type of device you are using.
●iOS/Android: www.hp.com/go/hpsmart-help
●Windows 10: www.hp.com/go/hpsmartwin-help
●macOS: www.hp.com/go/hpsmartmac-help
Scan using the HP printer software
This topic describes how to scan using the HP printer software.
Scan from a computer
Before scanning from a computer, make sure you have already installed the HP recommended printer
software. The printer and computer must be connected and turned on.
To scan a document or photo to a le (Windows)
1. Place the original print-side up in the document feeder or print-side down on the scanner glass (aligned
to the corner with an icon).
2. In the HP printer software (available from the Start menu), click Scan, and then click Scan a Document or
Photo.
3. Select the type of scan you want, and then click Scan.
Choose the le format to save the document (or photo).
NOTE:
●Click the More link at the top right corner of the Scan dialog to review and modify settings for any
scan. See Change scan settings (Windows).
●If Show Viewer After Scan is selected, you can make adjustments to the scanned image in the
preview screen.
To scan a document or photo to email (Windows)
1. Place the original print-side up in the document feeder or print-side down on the scanner glass (aligned
to the corner with an icon).
40 Chapter 5 Copy, Scan, and Mobile Fax
2. In the HP printer software, available from the Start menu, click Scan, and then click Scan a Document or
Photo.
3. Select the type of scan you want, and then click Scan.
NOTE:
●Click the More link at the top right corner of the Scan dialog to review and modify settings for any
scan. See Change scan settings (Windows).
●If Show Viewer After Scan is selected, you can make adjustments to the scanned image in the
preview screen.
Change scan settings (Windows)
You can modify any of the scan settings either for a singular use or save the changes to use permanently.
These settings include options such as page size and orientation, scan resolution, contrast, and the folder
location for saved scans.
1. Place the original print-side up in the document feeder or print-side down on the scanner glass (aligned
to the corner with an icon).
2. In the HP printer software, available from the Start menu, click Scan, and then click Scan a Document or
Photo.
3. Click the More link in the top right corner of the HP Scan dialog.
The detailed settings pane appears on the right. The left column summarizes the current settings for
each section. The right column allows you to change the settings in the highlighted section.
4. Click each section at the left of the detailed settings pane to review the settings in that section.
You can review and change most settings using drop-down menus.
Some settings allow greater exibility by displaying a new pane. These are indicated by a + (plus sign) at
the right of the setting. You must either click OK to accept or click Cancel to cancel any changes on this
pane to return to the detailed settings pane.
5. When you have nished changing settings, do one of the following:
●Click Scan. You are prompted to save or reject the changes to the shortcut after the scan is nished.
●Click the save icon to the right of the shortcut, and then click Scan.
Create a new scan shortcut (Windows)
You can create your own scan shortcut to make scanning easier. For example, you might want to regularly
scan and save photos in PNG format, rather than JPEG.
1. Place the original print-side up in the document feeder or print-side down on the scanner glass (aligned
to the corner with an icon).
2. In the HP printer software, available from the Start menu, click Scan, and then click Scan a Document or
Photo.
3. Click Create New Scan Shortcut.
Change scan settings (Windows) 41
4. Enter a descriptive name, choose an existing shortcut on which to base your new shortcut, and then click
Create.
5. Change the settings for your new shortcut to meet your needs, and then click the save icon to the right of
the shortcut.
NOTE: Click the More link at the top right corner of the Scan dialog to review and modify settings for
any scan.
For more information, see Change scan settings (Windows).
Scan using Webscan
Webscan is a feature of the EWS that lets you scan photos and documents from your printer to your device
using a web browser.
NOTE: For your security, some settings in the EWS are password-protected. Enter the password if
prompted. This is the password you have set in the EWS or the default PIN on a label in the ink access area.
To enable Webscan
1. Open EWS. For more information, see To access and use EWS.
2. Click the Settings tab.
3. From the left menu, click Security, and then select Administrator Settings.
4. Select the option to enable Webscan.
5. Click Apply.
To scan using Webscan
Scanning using Webscan oers basic scan options. For additional scan options or functionality, scan from the
HP printer software.
1. Place the original print-side up in the document feeder or print-side down on the scanner glass (aligned
to the corner with an icon). See Load original.
2. Open EWS. For more information, see To access and use EWS.
3. Click the Scan tab.
4. From the left menu, click Webscan.
5. Select the desired options, and then click Start Scan.
Tips for successful scanning and copying
Use the following tips to copy and scan successfully:
●Keep the glass and the back of the lid clean. The scanner interprets anything it detects on the glass as
part of the image.
●Load the original print-side down on the scanner glass (aligned to the corner with an icon).
42 Chapter 5 Copy, Scan, and Mobile Fax
●To make a large copy of a small original, scan the original into the computer, resize the image in the
scanning software, and then print a copy of the enlarged image.
●To avoid incorrect or missing scanned text, make sure the brightness is set appropriately in the software.
●Make sure to select the correct source (for example, scanner glass) for scanning when using HP software.
Mobile Fax
Use the HP Smart app to quickly scan and fax multiple pages at once from your mobile device or computer.
For more information about Mobile Fax, visit the HP Smart website.
Use Mobile Fax in the HP Smart app
1. Make sure your mobile device or computer are connected to a network. Launch the HP Smart app and
sign into or create your HP account.
2. Select the Mobile Fax tile.
If you do not see the Mobile Fax tile, enable it as follows:
●On a mobile device: Tap Personalize Tiles, tap the Mobile Fax toggle to enable the tile, and then go
back to the Home screen.
●On a Windows 10 device: Click the Settings , select Personalize Tiles, and click the Mobile Fax toggle
to enable the tile. Then, go back to the Home screen.
●On a Mac device: From the menu bar, select HP Smart >Personalize Tiles. Set the Mobile Fax option
to On.
NOTE: Mobile Fax is available in specic countries/regions. If you do not see a Mobile Fax option in
the Personalize Menu, Mobile Fax might not be available in your country/region.
3. Fill out the necessary mobile fax information.
4. To add a cover page, tap the Add a cover page toggle, and then type a subject and message.
5. Scan the item you want to fax using your printer or mobile device camera, or attach a supported le type.
Send the fax when ready.
Your fax will be securely delivered and you can track the status in the HP Smart app.
Mobile Fax 43
Congure your printer6
This section describes how to congure your printer.
Congure the printer using the embedded web server (EWS)
Use the embedded web server (EWS) to manage printing functions from your computer.
●View printer status information
●Check the information and status of the printing supplies
●Receive notication of printer and supplies events
●View and change the network and the printer settings
To access and use EWS
You can open EWS using one of the following:
●HP Smart app
●HP printer software
●Web browser using IP address
●Web browser using Wi-Fi Direct connection
Things to note when accessing EWS
●If the web browser displays a message indicating that the website is unsafe, select the option to continue.
Accessing the website will not harm your device.
●The default username is “admin”.
●For your security, some settings in the printer home page or EWS are password-protected.
–When accessing the EWS for the rst time, enter the PIN if prompted. This personal identication
number (PIN) is available from a label in the printer.
–Open the ink access door or cartridge access door to locate the label.
–Once you have access to EWS, you can change the password from EWS.
44 Chapter 6 Congure your printer
●Depending on how the printer is connected, some features in EWS might not be available.
●EWS is not accessible beyond the network rewall.
To open EWS using HP Smart (iOS, Android, and Windows 10)
1. Open the HP Smart app on your computer or mobile device. See Use the HP Smart app to print, scan, and
manage.
2. From HP Smart, select your printer, and then click or tap Advanced Settings.
To open EWS using an IP address (Wi-Fi or Ethernet connection)
1. Find out the IP address. Press the Information button on the printer to print an information page.
2. Open a web browser, type the IP address or hostname in the address bar, and then click or tap Enter.
To open EWS using an IP address (Wi-Fi Direct connection)
1. Make sure your device and the printer are connected using Wi-Fi Direct. See Print while connected to
same Wi-Fi network.
2. Open a web browser, type the following IP address or hostname of the printer in the address bar, and
then click or tap Enter.
IP Address: 192.168.223.1
To open EWS using HP Printer software (Windows 7)
1. From the computer desktop, click Start, select All Programs, click HP, click the folder for the printer,
select the icon with the printer's name, and then open HP Printer Assistant.
NOTE: Windows 7 Service Pack 1 (SP1) is required to install HP printer software.
2. In the HP Printer Assistant, select Print tab.
3. Select Printer Home Page (EWS).
Congure IP network settings
Use the following sections to congure the printer network settings.
To open EWS using HP Smart (iOS, Android, and Windows 10) 45
If prompted for a password, enter the PIN which is available from a label in the cartridge access area. See
Things to note when accessing EWS.
View or change network settings
Use the embedded web server (EWS) to view or change IP conguration settings.
1. Open EWS. See To access and use EWS.
2. Click the Network tab to obtain network information. Change settings as needed.
Rename the printer on a network
To rename the printer on a network so that it can be uniquely identied, use the embedded web server (EWS).
1. Open EWS. See To access and use EWS.
2. Click the Network tab.
3. From the left menu, click General.
4. Click Network Identication.
5. Make the necessary changes, and then click Apply.
Manually congure IPv4 TCP/IP parameters
Use the embedded web server (EWS) to manually set an IPv4 address, subnet mask, and default gateway.
1. Open EWS. See To access and use EWS.
2. Click the Network tab.
3. From the left menu, click Wired.
4. Click IPv4 Conguration.
5. Make the necessary changes, and then Apply.
Assign or change the system password using the embedded web server (EWS)
Assign an administrator password for access to the printer and EWS so that unauthorized users cannot change
the printer settings.
1. Open EWS. See To access and use EWS.
2. Click the Settings tab.
3. From the left menu, click Security.
4. Click Password Settings.
5. Make the necessary changes, and then click Apply.
NOTE: Make note of the password and store it in a safe place.
Update the printer
This topic describes how to update the printer rmware.
46 Chapter 6 Congure your printer
HP periodically releases rmware updates to enhance product functionality and x issues. By default, if the
printer is connected to the Internet, the printer automatically checks for updates at regular intervals.
To update the printer or change the settings from the embedded web server (EWS)
1. Open EWS. See To access and use EWS.
2. Click the Tools tab.
3. From the left menu, click Printer Updates, and then select Firmware Updates.
4. Select the desired options, and then click Apply.
Use Web Services
This topic describes how to use Web services.
NOTE: For your security, some settings in the embedded web server (EWS) are password-protected. Enter
the password if prompted. This is the password you have set in the EWS or the default PIN on a label in the
ink access area.
To set up Web Services using the embedded web server (EWS)
1. Open EWS. See To access and use EWS.
2. Click the Web Services tab.
3. From the left menu, click Web Services Settings.
4. Click Setup, select the relevant option or button to continue, and follow the on-screen instructions to
accept the terms of use.
NOTE: If prompted for proxy settings and if your network uses proxy settings, follow the on-screen
instructions to set up a proxy server. If you do not have the proxy details, contact your network
administrator or the person who set up the network.
5. When the printer is connected to the server, the printer prints an information page. Follow the
instructions on the information page to nish the setup.
To remove Web Services using the embedded web server (EWS)
1. Open EWS. See To access and use EWS.
2. Click the Web Services tab.
3. From the left menu, click Web Services Settings, click Remove Web Services, and then follow the
on-screen instructions.
To update the printer or change the settings from the embedded web server (EWS) 47
Manage ink and printheads7
This section describes how to manage ink and printheads.
Check the ink levels
You can check the ink levels from the ink tanks on the printer. You can also check the HP printer software or
printer control panel to determine when the tanks need to be relled.
If you are using the HP Smart app, the estimated ink levels of the selected printer is displayed on the Home
screen.
To check the estimated ink levels from the printer software (Windows)
1. In the HP printer software (available from the Start menu), click Estimated Levels at the top of the
window.
2. In the Toolbox, click the Estimated Levels tab.
Rell ink tanks
NOTE: Product service or repairs required as a result of lling the ink tanks improperly and/or using non-HP
ink will not be covered under warranty.
To rell the ink tanks
1. Open the ink access door and tank covers.
48 Chapter 7 Manage ink and printheads
2. Open the cap of the ink tank you plan to rell.
3. Depending on the type of ink bottles you have, do one of following:
●Screw-cap bottles: Twist open the cap on the ink bottle.
●Flip-cap bottles: Twist open the cap on the ink bottle, remove the seal from the bottle, screw back
the cap and tighten it. Then, ip open the top of the cap.
4. Match the color of the ink bottle with the color of the ink tank.
Place the bottle upside down on the tank, make sure the tip of the bottle ts properly over the tank
nozzle.
NOTE:
●For screw-cap bottles, the tip of the bottle should click into place when pressed down gently over
the tank nozzle.
To rell the ink tanks 49
●Do not squeeze the ink bottles when lling ink. The ink bottles you have might vary.
●If there is leftover ink in the bottle, store the bottle in an upright position in a cool and dry location.
5. Let the ink drain into the tank until the tank is full.
If the ink does not drain immediately, remove the bottle and properly reinsert it on the tank.
6. Close the tank cap securely.
7. Repeat steps 2 to 6 to rell other ink tanks.
50 Chapter 7 Manage ink and printheads
8. Close the tank covers and ink access door.
Precautions for working with ink bottles
Use the following tips to work with ink bottles:
●Keep the ink bottles beyond the reach of children.
●Open the ink bottles only when you plan to ll the ink tanks.
●Do not tilt, shake, or squeeze the ink bottle when it is open to prevent ink leaks.
●Store the ink bottles in a cool, dark place.
●Do not drink or place in mouth.
Order ink supplies
Before ordering ink bottles, visually check the labels on the ink bottles to locate the ink bottle numbers. You
can also nd this information on a label in the ink access area.
To order original HP supplies for the printer, go to www.hp.com/buy/supplies. If prompted, choose your
country/region, and then follow the prompts to nd the right ink bottles for your printer.
NOTE: Ordering ink bottles online is not supported in all countries/regions. If it is not available in your
country/region, you may still view supplies information and print a list for reference when shopping at a local
HP reseller.
Print with black ink only (Windows)
1. From your software, select Print.
2. Make sure your printer is selected.
Precautions for working with ink bottles 51
3. Click the button that opens the Properties dialog box.
Depending on your software application, this button might be called Properties, Options, Printer Setup,
Printer Properties, Printer, or Preferences.
4. Select the appropriate options.
●Windows 10
–Click Paper/Quality tab.
–Under Print in Grayscale, select Black Ink Only from the list, and then click OK.
●Windows 7
–On the Layout or Paper/Quality tab, click the Advanced button to open the Advanced Options
dialog box.
–From the Print in Grayscale drop-down list, select Black Ink Only, and then click OK.
Improve print quality
You can print a diagnostics page to determine if cleaning or aligning the printheads is recommended to
improve print quality.
To print a print quality diagnostics page, see Print reports from the printer control panel.
You can also use the HP Smart app to improve the print quality. For information about this app, see Use the HP
Smart app to print, scan, and manage.
To print a print quality diagnostics page (Windows)
1. Load Letter or A4 unused plain white paper into the input tray.
2. In the HP printer software (available from the Start menu), click Print & Scan at the top of the window.
3. In the Print section, click Maintain Your Printer to access the Toolbox.
4. In the Toolbox, click the Device Services tab, and then click the option to print the page.
52 Chapter 7 Manage ink and printheads
Understand the print quality diagnostics page
1. Review the black, cyan, magenta, and yellow boxes along with the other content on the diagnostics
page.
2. If the diagnostic page shows steaks or missing portions of the color and black boxes, then automatically
clean the printheads.
See Align and clean printheads.
3. If straight lines appear jagged on printouts, or the diagnostic page indicates to align the printheads, then
automatically align the printheads.
See Align and clean printheads.
4. If print quality problems persist after cleaning and aligning printheads, contact HP support.
Align and clean printheads
The printer has a feature to automatically align or clean the printheads.
Understand the print quality diagnostics page 53
You can check the print quality diagnostics page to determine if aligning or cleaning is recommended. See
Understand the print quality diagnostics page.
●Align printheads: Aligning the printheads can improve print quality. If you notice misaligned colors or
lines in your printouts or on the print quality diagnostics page, you should perform an alignment.
●Clean printheads: If your prints are streaked or have incorrect or missing colors, the printheads might
need to be cleaned.
NOTE:
–The cleaning process prints one page to attempt to clean the printheads.
–Clean the printheads only when necessary. Unnecessary cleaning wastes ink and shortens the life of
the printheads.
To align or clean the printheads from the embedded web server (EWS)
1. Open EWS. See To access and use EWS.
2. Click the Tools tab.
3. From the left menu, click Utilities, and select Print Quality Toolbox.
4. Click the button next to the option to align or clean printheads.
To align or clean the printheads (Windows)
1. Load Letter or A4 unused plain white paper into the input tray.
2. In the HP printer software (available from the Start menu), click Print & Scan at the top of the window.
3. In the Print section, click Maintain Your Printer to access the Toolbox.
4. In the Toolbox, click the Device Services tab, click the desired option, and then follow the on-screen
instructions.
Clean printer
You can run a cleaning routine from the printer software to prevent back of page smearing.
To clean the printer from the printer software (Windows)
1. Load Letter or A4 unused plain white paper into the input tray.
2. In the HP printer software (available from the Start menu), click Print & Scan at the top of the window.
3. In the Print section, click Maintain Your Printer to access the Toolbox.
4. In the Toolbox, click the Device Services tab, click the desired option, and then follow the on-screen
instructions.
54 Chapter 7 Manage ink and printheads
Tips for working with ink and printheads
Printhead tips
Use the following tips to work with printheads:
●Use original HP printheads.
●Handle printheads with care. Do not drop the printheads, and do not touch the electric contacts or print
nozzles on any surface.
●To protect the printheads from drying out, always turn the printer o using the Power button, and wait
until the Power button light goes out.
●Do not open or untape printheads until you are ready to install them, as this can lead to print quality
issues. Leaving tape on the printheads reduces ink evaporation.
●Install both the black and color printheads correctly. See To verify the printheads are installed properly.
●After you have set up the printer, do not open the printhead cover unless instructed to do so.
●You can align the printheads to improve the print quality. See Improve print quality for more information.
●If you remove a printhead from the printer for any reason, try to replace it again as soon as possible. If
left unprotected outside the printer, the printhead may begin to dry out.
Ink tips
Use the following tips to work with ink:
●Make sure the ink tanks are not low on ink before printing. See Check the ink levels.
●Rell the ink tanks when they are low on ink. Printing with the ink tanks low on ink may cause damage to
your printer.
●Do not tilt the printer.
NOTE: Original HP printheads and ink are designed and tested with HP printers and papers to help you
easily produce great results, time after time.
HP cannot guarantee the quality or reliability of non-HP supplies. Product service or repairs required as a
result of using a non-HP supply will not be covered under warranty.
Move printer
To prevent damage to the printer or ink leakage, follow these instructions.
If you are moving the printer within your home or oice, keep the printhead cover closed, and keep the printer
horizontal.
To move the printer to a dierent location outside of your home or oice, see the instructions provided inbox
for moving printer, or visit hp.com/support.
Tips for working with ink and printheads 55
Solve a problem8
This section suggests solutions to common problems.
If the suggestions do not solve the problems, try getting help using one of the support services, see
HP support.
You can also get help from the HP Smart app and printer control panel:
●HP Smart: Provides alerts for printer issues (jams and other problems), links to help content, and options
to contact support for additional assistance. See Use the HP Smart app to print, scan, and manage.
●Printer control panel: See Understand control panel lights and display icons.
Jams and paper-feed issues
This topic helps you troubleshoot jams and paper-feed issues.
Clear a paper or print carriage jam
Paper jams can occur in several locations. For print carriage jams, remove any objects, including paper, that
are blocking the print carriage in the ink access area.
NOTE: Do not use any tools or other devices to remove jammed objects. Always use caution when
removing jammed objects from inside the printer.
To clear paper jams from the tray
1. Remove the input tray.
2. Remove the output tray.
56 Chapter 8 Solve a problem
3. Remove the duplexer plate. Do this by carefully reaching inside the gap where the trays were and pulling
out the plate.
4. Remove any jammed paper.
5. Reinsert the duplexer plate, the output tray, and then the input tray.
To clear paper jams from the tray 57
To clear paper jams from the inside of the printer
1. Lift the ink access door.
2. Remove any jammed paper.
58 Chapter 8 Solve a problem
3. Close the ink access door.
To clear paper jams from the rear of the printer
1. Open the door at the rear of the printer.
To clear paper jams from the rear of the printer 59
2. Remove any jammed paper.
3. Close the rear door.
To clear paper jams from the document feeder (some printer models)
NOTE: If paper jams keep occurring when using the document feeder, and other means to avoid document
feeder jams do not help, try cleaning the document feeder glass area using a dry, lint-free cloth. See Clean
the document feeder glass area (some printer models).
60 Chapter 8 Solve a problem
1. Open the document feeder cover.
2. Remove any jammed paper.
To clear paper jams from the document feeder (some printer models) 61
3. Close the document feeder cover.
Learn how to avoid paper jams
To avoid paper jams, follow these guidelines.
●Do not overll the input tray, but make sure that you have at least 5 pages loaded, for best results.
●Keep your printer free of dust and debris by removing paper and closing the input tray when not in use.
●Remove printed papers from the output tray frequently.
●Ensure that paper loaded in the input tray lays at, and the edges are not bent or torn.
●Do not combine dierent paper types and paper sizes in the input tray; the entire stack of paper in the
input tray must be the same size and type.
Use HP paper for optimum performance. See Paper basics for more information about HP paper.
●Adjust the paper-width guides in the input tray to t snugly against all paper. Make sure the paper-width
guides do not bend the paper in the input tray.
●Do not force paper too far down in the input tray.
●Do not add paper while the printer is printing. Wait for the printer to prompt before loading paper.
Solve paper-feed problems
What kind of problem are you having?
●Paper is not picked up from the input tray
–Make sure paper is loaded in the input tray. See Load paper.
–Adjust the paper-width guides in the input tray to t snugly against all paper. Make sure the
paper-width guides do not bend the paper in the input tray.
–Make sure paper in the input tray is not curled. Uncurl paper by bending it in the opposite direction of
the curl.
62 Chapter 8 Solve a problem
–Prevent curled or wrinkled paper by storing all unused paper at in a resealable bag.
–After printing is nished, remove unused photo paper from the input tray. Store the photo paper so it
does not start to curl, which could reduce the quality of your printout.
–Clean the paper rollers.
●Pages are skewing
–Make sure the paper loaded in the input tray is aligned to the paper-width guides. If needed, pull out
the input tray from the printer and reload the paper correctly, making sure that the paper guides are
aligned correctly.
–Load paper into the printer only when it is not printing.
–Make sure the rear access door is securely shut.
●Multiple pages are being picked up
–Adjust the paper-width guides in the input tray to t snugly against all paper. Make sure the
paper-width guides do not bend the paper in the input tray.
–Make sure the input tray is not overloaded with paper.
–Make sure the pieces of the loaded paper are not sticking together.
–Use HP paper for optimum performance and eiciency.
–Clean the paper rollers.
To clean the paper rollers manually
1. Gather the following materials:
●A long, lint-free cotton swab
●Distilled, ltered, or bottled water (tap water might damage the printer)
2. Press the Power button to turn o the printer.
3. Disconnect the power cord from the rear of the printer.
4. Disconnect any other cable from the printer.
5. Remove the input tray.
To clean the paper rollers manually 63
6. Remove the output tray.
7. Look inside the gap where the trays were and nd the gray paper pick rollers. You might need a ashlight
to illuminate the area.
8. Dampen a long cotton swab with bottled or distilled water, and then squeeze any excess water from the
cloth.
9. Press the swab against the rollers, and then rotate them away from you with your ngers. Apply a
moderate amount of pressure to remove dust or dirt buildup.
10. Allow the rollers to dry for 10 or 15 minutes.
11. Reinsert the output tray and the input tray.
12. Reconnect the power cord to the rear of the printer.
13. Reconnect any other cable to the printer if necessary.
14. Press the Power button to turn on the printer.
Printhead problem
This topic helps you troubleshoot printhead problems.
1. Verify that the indicated printhead is correctly installed.
2. Clean the printhead contacts.
64 Chapter 8 Solve a problem
3. Contact HP support for assistance. Go to hp.com/support.
To verify the printheads are installed properly
NOTE:
●The instructions here are only applicable in this section. After you have set up the printer, do not open
the printhead cover unless instructed to do so.
●Handle printheads with care. Do not drop the printheads, and do not touch the electric contacts or print
nozzles on any surface.
1. Make sure the printer is turned on.
2. Lift the ink access door. Wait for the print carriage to move to the center and stop.
NOTE: After you have set up the printer, do not open the printhead cover unless instructed to do so.
3. Remove and reinsert the printhead.
a. Press the blue button to open the printhead cover.
b. Remove the printhead from the carriage.
c. If you nd any orange cap or tape on the printhead, remove it.
CAUTION: Do not touch the electric contacts or print nozzles.
To verify the printheads are installed properly 65
d. Insert the printhead into the slot until it clicks into place.
e. Close the printhead cover.
Make sure it is properly closed to avoid problems such as carriage jams.
4. Close the ink access door.
To clean printhead contacts
NOTE:
●Open the printhead cover and clean printhead contacts only when necessary; for example, if a printhead
cannot be detected.
The instructions here are only applicable in this section. After you have set up the printer, do not open
the printhead cover unless instructed to do so.
●The cleaning procedure should take only a few minutes. Make sure that the printheads are reinstalled
in the printer as soon as possible. It is not recommended to leave the printheads outside of the printer
longer than 30 minutes. This could result in damage to the printheads.
●Handle printheads with care. Do not drop the printheads, and do not touch the electric contacts or print
nozzles on any surface.
1. Make sure the printer is turned on.
2. Lift the ink access door.
NOTE: After you have set up the printer, do not open the printhead cover unless instructed to do so.
3. Press the blue button to open the printhead cover.
66 Chapter 8 Solve a problem
4. Remove the printhead indicated in the error message.
5. Clean the printhead contacts and printer contacts.
a. Hold the printhead by its sides and locate the electrical contacts on the printhhead.
The electrical contacts are the small gold-colored dots on the printhead.
NOTE: Do not touch the electric contacts or print nozzles.
b. Wipe only the contacts with a dry swab or lint-free cloth.
NOTE: Be careful to wipe only the contacts, do not smear any ink or other debris on the contacts.
c. On the inside of the printer, locate the contacts for the printhead.
The printer contacts are the set of gold-colored bumps positioned to meet the contacts on the
printhead.
d. Use a dry swab or lint-free cloth to wipe the contacts.
NOTE: Be careful to wipe only the contacts, do not smear any ink or other debris on the contacts.
To clean printhead contacts 67
6. Insert the printhead into the slot until it clicks into place.
7. Close the printhead cover.
Make sure it is properly closed to avoid problems such as carriage jams.
8. Close the ink access door.
9. Check if the error message has gone away.
If you still receive the error message, turn the printer o, and then on.
Printing issues
This topic helps you troubleshoot printing issues.
●Use the HP Print and Scan Doctor to help diagnose and x issues automatically.
NOTE: This tool is for the Windows operating system, and is only available in some languages.
●To avoid print quality problems, always turn the printer o using the Power button, and wait until the
Power button light goes out before you pull the plug or turn o a power strip. This allows the printer to
move the printheads to a capped position, where they are protected from drying out.
To improve print quality, see Improve print quality.
To resolve print issues (Windows)
Make sure that the printer is turned on and that there is paper in the input tray. If you are still unable to print,
try the following in order:
1. Check for error messages from the printer software and resolve them by following the on-screen
instructions.
2. If your computer is connected to the printer with a USB cable, disconnect and reconnect the USB cable.
If your computer is connected to the printer with a wireless connection, conrm that the connection is
working.
68 Chapter 8 Solve a problem
3. Verify that the printer is not paused or oine.
To verify that the printer is not paused or oine
a. Depending on your operating system, do one of the following:
●Windows 10: From the Windows Start menu, select Windows System from the app list, select
Control Panel, and then click View devices and printers under Hardware and Sound.
●Windows 7: From the Windows Start menu, click Devices and Printers.
b. Either double-click or right-click the icon for your printer and select See what's printing to open the
print queue.
c. On the Printer menu, make sure there are no check marks next to Pause Printing or Use Printer
Oine.
d. If you made any changes, try to print again.
4. Verify that the printer is set as the default printer.
To verify that the printer is set as the default printer.
a. Depending on your operating system, do one of the following:
●Windows 10: From the Windows Start menu, select Windows System from the app list, select
Control Panel, and then click View devices and printers under Hardware and Sound.
●Windows 7: From the Windows Start menu, click Devices and Printers.
b. Make sure the correct printer is set as the default printer.
The default printer has a check mark in a black or green circle next to it.
c. If the wrong printer is set as the default printer, right-click the correct printer and select Set as
Default Printer.
d. Try using your printer again.
5. Restart the print spooler.
To restart the print spooler
a. Depending on your operating system, do one of the following:
●Windows 10: From the Windows Start menu, click Windows System, and then click Control
Panel.
●Windows 7: From the Windows Start menu, click Control Panel.
b. Click System and Security, and then click Administrative Tools.
c. Double-click Services.
d. Right-click the Print Spooler, and then click Properties.
e. On the General tab, make sure Automatic is selected from the Startup type drop-down list.
f. Under Service status, check the status.
●If the service is not running, click Start.
To resolve print issues (Windows) 69
●If the service is running, click Stop, and then click Start to restart the service.
Then click OK.
6. Restart the computer.
7. Clear the print queue.
To clear the print queue
a. Depending on your operating system, do one of the following:
●Windows 10: From the Windows Start menu, click Windows System, and then click Control
Panel. Under Hardware and Sound, click View devices and printers.
●Windows 7: From the Windows Start menu, click Devices and Printers.
b. Right-click the printer, and then select the option to see what is printing.
c. On the Printer menu, click Cancel all documents or Purge Print Document, and then click Yes to
conrm.
d. If there are still documents in the queue, restart the computer and try printing again after the
computer has restarted.
e. Check the print queue again to make sure it is clear, and then try to print again.
To resolve print issues (macOS)
1. Check for error messages and resolve.
2. Disconnect and reconnect the USB cable.
3. Verify that the product is not paused or oine.
a. In System Preferences, click Printers & Scanners.
b. Click the Open Print Queue button.
c. Click a print job to select it.
Use the following buttons to manage the print job:
●Delete: Cancel the selected print job.
●Hold: Pause the selected print job.
●Resume: Continue a paused print job.
●Pause Printer: Pause all print jobs in the print queue.
d. If you made any changes, try to print again.
4. Restart the computer.
Copy and scan issues
This topic helps you troubleshoot copy and scan issues.
●See Tips for successful scanning and copying.
70 Chapter 8 Solve a problem
●Use the HP Print and Scan Doctor to help diagnose and x issues automatically.
NOTE: This tool is for the Windows operating system, and is only available in some languages.
Network and connection issues
This topic helps you troubleshoot network and connection issues.
Fix network connection issues
Choose one of the following troubleshooting options:
●Restore network settings and reconnect the printer. See Restore original factory defaults and settings.
●Print and check the wireless network test report and network conguration page to assist in diagnosing
network connection issues. See Print reports from the printer control panel.
●Ensure that rewalls and security software (including anti-virus, anti-spyware programs) are not
aecting the printer connection to your network.
For more information, visit www.hpsmart.com/wireless-printing.
●Use the HP Print and Scan Doctor (Windows only) to help diagnose and automatically x network
connection issues.
You can also use this tool to nd network settings, such as the network name (SSID) and password
(network key).
Fix Wi-Fi Direct connection issues
1. See Print without connecting to same Wi-Fi network (Wi-Fi Direct).
2. Make sure that the Wi-Fi Direct icon on the printer display is on. See To turn Wi-Fi Direct on or o.
3. From your wireless computer or mobile device, turn on the wireless (Wi-Fi) connection, and then search
for and connect to the Wi-Fi Direct name of your printer.
4. Enter the Wi-Fi Direct password when prompted.
5. If you are using a mobile device, make sure you have installed a compatible printing app. For more
information about mobile printing, visit www.hp.com/go/mobileprinting.
Fix Ethernet connection issues (some printer models)
This topic describes how to solve Ethernet connection problems.
Check the following:
●The network is operational and the network hub, switch, or router is turned on.
●The Ethernet cable is properly connected between the printer and the router. The Ethernet cable is
plugged into the Ethernet port on the printer and the light near the connector lights up when connected.
●Ensure that rewalls and security software (including anti-virus, anti-spyware programs) are not
aecting the printer connection to your network.
For more information, visit www.hpsmart.com/wireless-printing.
Network and connection issues 71
●Use the HP Print and Scan Doctor (Windows only) to help diagnose and automatically x connection
issues.
Restore original factory defaults and settings
This topic describes how to restore original factory defaults and settings.
●If you have made changes to the printer or network settings, you can restore the printer to the original
factory settings or network settings.
●If more than 2 hours have passed since you rst turned on the printer and you have not set up the printer
wirelessly, place the printer in Wi-Fi setup mode by restoring the printer network settings. The setup
mode will last for 2 hours.
●You can also troubleshoot network connection issues by restoring the printer network settings.
●If you restore the printer network settings, you will need to reconnect the printer to the network using the
HP Smart app. See Connect your printer to a Wi-Fi network using HP Smart.
To restore printer factory defaults from the printer control panel
1. Press and hold the Information button for 5 seconds until the control panel buttons light up.
2. Lift the ink access door.
3. Press the Information button and the Cancel button at the same time for at least 3 seconds.
To restore the printer network settings from the printer control panel
1. Press and hold the Information button for 5 seconds until the control panel buttons light up.
2. Press the Wi-Fi button and the Cancel button at the same time for 5 seconds until the Wi-Fi
light blinks blue.
In Wi-Fi setup mode, the Wi-Fi light blinks blue, the Wi-Fi signal bars cycle, and the Wi-Fi alert icon is o.
See Wi-Fi status, light, and icons.
To restore the printer factory settings or network settings from the embedded web
server (EWS)
1. Open EWS. See To access and use EWS.
2. Click the Settings tab.
3. Click Restore Defaults, and select the option to restore the factory default settings or network settings.
4. Click the button on the selected page to continue.
Solve Web Services problems
If you are having problems using Web Services, check the following:
72 Chapter 8 Solve a problem
●Make sure the printer is connected to the Internet using a supported network connection.
●Make sure the latest product updates have been installed on the printer.
●Make sure Web Services is enabled on the printer. See Use Web Services.
●Make sure the network hub, switch, or router is turned on and working correctly.
●If you are connecting the printer using a wireless connection, make sure the Wi-Fi network is functioning
properly. For more information, see Network and connection issues.
●If your network uses proxy settings when connecting to the Internet, make sure the proxy settings you
are entering are valid:
–Check the settings being used by the web browser you are using (such as Internet Explorer, Firefox, or
Safari).
–Check with the IT administrator or person who set up your rewall.
If the proxy settings used by your rewall have changed, you must update these settings in either the
printer control panel or the embedded web server (EWS). If these settings are not updated, you will
not be able to use Web Services.
For more information, see Use Web Services.
Printer hardware issues
This topic helps you troubleshoot printer hardware issues.
Close all covers and doors
●Make sure the tank covers, printhead cover, and ink access door are properly closed.
The printer shuts down unexpectedly
●Check the power and power connections.
Printer hardware issues 73
●Make sure the printer's power cord is connected rmly to a functioning power outlet.
NOTE: When Auto-O is enabled, the printer will automatically turn o after 2 hours of inactivity to help
reduce energy use. For more information, see Auto-O.
Resolve printer failure
●Turn the printer o, then on. If that does not resolve the problem, contact HP.
Maintain the printer
This topic describes how to maintain the printer.
Clean the scanner glass
Dust or dirt on the scanner glass, scanner lid backing, or scanner frame can slow down performance, degrade
the quality of scans, and aect the accuracy of special features such as tting copies to a certain page size.
To clean the scanner glass
WARNING! Before cleaning the printer, turn the printer o by pressing the Power button , and unplug
the power cord from the electrical socket.
1. Lift the scanner lid.
2. Clean the scanner glass and lid backing by using a dry and soft, lint-free cloth.
Spray the cloth with a mild glass cleaner and clean only the glass.
74 Chapter 8 Solve a problem
CAUTION:
●Do not clean the scanner lid backing with anything wet to avoid damaging the protection layer.
●Use only glass cleaner to clean the scanner glass. Avoid cleaners that contain abrasives, acetone,
benzene, and carbon tetrachloride, all of which can damage the scanner glass. Avoid isopropyl
alcohol because it can leave streaks on the scanner glass.
●Do not spray the glass cleaner directly on the scanner glass. If too much glass cleaner is applied, the
cleaner could leak under the scanner glass and damage the scanner.
3. Close the scanner lid, and turn on the printer.
Clean the document feeder glass area (some printer models)
If paper jams keep occurring when using the document feeder, and other means to avoid document feeder
jams do not help, try cleaning the document feeder glass area using a dry, lint-free cloth.
1. Lift the scanner lid.
2. Using a dry and soft, lint-free cloth, clean the document feeder glass and the indicated area on the
scanner lid.
Clean the exterior
WARNING! Before cleaning the printer, turn the printer o by pressing the power button the Power
button , and unplugging the power cord from the electrical socket.
Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains o of the case. Keep uids away from the
interior of the printer, as well as from the printer control panel.
Clean the document feeder (some printer models)
If the document feeder picks up multiple pages or if it does not pick up plain paper, you can clean the rollers
and separator pad.
NOTE: If you encounter paper jams or poor outcome when copying or scanning using the document feeder,
you might need to clean the document feeder glass (some printer models), see Clean the document feeder
glass area (some printer models).
Clean the document feeder glass area (some printer models) 75
To clean the rollers or separator pad
WARNING! Before cleaning the printer, turn the printer o by pressing the Power button , and unplug
the power cord from the electrical socket.
1. Remove all originals from the document feeder input tray.
2. Open the document feeder cover.
This provides easy access to the rollers (1) and separator pad (2).
Table 8-1 Rollers and separators
Feature Description
1 Rollers
2 Separator pad
76 Chapter 8 Solve a problem
3. Lightly dampen a clean lint-free cloth with distilled water, then squeeze any excess liquid from the cloth.
4. Use the damp cloth to wipe any residue o the rollers or separator pad.
NOTE: If the residue does not come o using distilled water, try using isopropyl (rubbing) alcohol.
5. Close the document feeder cover.
HP support
HP online support provides a variety of options for help with your printer. For the latest product updates and
support information, visit hp.com/support.
NOTE: You can also use the HP Smart app to check printer errors and get troubleshooting assistance. For
information about this app, see Use the HP Smart app to print, scan, and manage.
Contact HP
If you need help from an HP technical support representative to solve a problem, visit the
Contact Support website. The following contact options are available at no cost for in-warranty customers (HP
agent-assisted support for out-of warranty customers may require a fee):
●Chat with an HP support agent online.
●Call an HP support agent.
When contacting HP support, be prepared to provide the following information:
●Product name (located on the printer)
●Product number and serial number (on a label in the ink access area)
Register printer
By taking just a few quick minutes to register, you can enjoy quicker service, more eicient support, and
product support alerts.
If you did not register your printer while installing the software, you can register now at register.hp.com.
HP support 77
HP EcoSolutions (HP and the Environment)9
For more detailed information about environmental guidelines that HP follows during the manufacturing
process, see Environmental product stewardship program. For more information about HP's environmental
initiatives, visit HP EcoSolutions.
Power Management
This topic describes the power management features of the printer.
Sleep mode
●Power usage is reduced while in Sleep mode.
●After initial setup of printer, the printer will enter Sleep mode after 5 minutes of inactivity.
●You can change the time the printer goes to sleep after a period of inactivity.
●The Power button light is dimmed and the printer control panel display is o in Sleep mode.
●To wake the printer from sleep, touch anywhere on the printer control panel.
Auto-O
This feature turns the printer o after 2 hours of inactivity to help reduce energy use. Auto-O turns the
printer o completely, so you must use the Power button to turn the printer back on.
If your printer supports this energy saving feature, Auto-O is automatically enabled or disabled depending
on printer capabilities and connection options. Even when Auto-O is disabled, the printer enters Sleep mode
after 5 minutes of inactivity to help reduce energy use.
●Auto-O is enabled when the printer is turned on, if the printer does not have network, fax or Wi-Fi Direct
capability, or is not using these capabilities.
●Auto-O is disabled when a printer’s Wi-Fi or Wi-Fi Direct capability is turned on or when a printer with
fax, USB, or Ethernet network capability establishes a fax, USB, or Ethernet network connection.
TIP: To conserve battery power, you can enable Auto-O, even when the printer is connected or Wi-Fi
is turned on.
To change the time for Sleep mode and Auto-O from the embedded web server (EWS)
1. Open EWS. See To access and use EWS.
2. Click the Settings tab.
3. From the left menu, click Power Management.
4. Click Energy Save Mode or Auto-O.
5. Select the desired time, and then click Apply.
HP EcoSolutions (HP and the Environment) 79
Schedule On and O
Use this feature to automatically turn the printer on or o on selected days. For example, you can schedule
the printer to turn on at 8 a.m. and turn o at 8 p.m. from Monday to Friday. In this way, you save energy
during the night and weekends.
To schedule the days and time to turn the printer on or o
1. Open EWS. See To access and use EWS.
2. Click the Settings tab.
3. From the left menu, click Power Management.
4. Click Schedule On/O, and specify the desired time and days to automatically turn on or o the printer.
5. Click Apply.
Quiet Mode
Quiet Mode slows down printing to reduce overall noise without aecting print quality. Quiet Mode only works
when printing on plain paper with normal print quality.
To reduce printing noise, turn on Quiet Mode. To print at normal speed, turn Quiet Mode o. Quiet Mode is o
by default.
NOTE:
●You can specify the time to automatically turn on the feature.
●To change the setting from HP Smart, open HP Smart on your device, select your printer, and then click
Printer Settings.
To turn Quiet mode on or o or change the settings from the embedded web server
(EWS)
1. Open EWS. See To access and use EWS.
2. Click the Settings tab.
3. From the left menu, click Preferences.
4. Click Quiet Mode and make the necessary changes.
5. Click Apply.
80 Chapter 9 HP EcoSolutions (HP and the Environment)
Technical informationA
The information contained herein is subject to change without notice. Some statements might not be
applicable for your printer or all countries/regions.
Specications
For more information about the product specications (including acoustic information, print resolutions,
system requirements), visit hp.com/support.
Environmental specications
●Recommended operating temperature range: 15°C to 30°C (59°F to 86°F)
●Recommended and operating humidity range: 20% to 80% relative humidity (RH), non-condensing
●Operating temperature range: 5°C to 40°C (41°F to 104°F)
●Non-operating (storage) temperature range: -40°C to 60°C ( -40°F to 140°F)
●In the presence of high electromagnetic elds, it is possible the output from the printer may be slightly
distorted
●HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize injected noise
due to potential high electromagnetic elds
Input tray capacity (HP Smart Tank 660-670 series)
●Plain paper sheets (75 g/m2 [20lb]): Up to 150
●Envelopes: Up to 10
●Photo paper sheets: Up to 30
Input tray capacity (HP Smart Tank 710-720, 750 series)
●Plain paper sheets (75 g/m2 [20lb]): Up to 250
●Envelopes: Up to 30
●Index cards: Up to 50
●Photo paper sheets: Up to 50
Output tray capacity
●Plain paper sheets (75 g/m2 [20lb]): Up to 100
●Envelopes: Up to 30
●Index cards: Up to 30 (HP Smart Tank 710-720, 750 series)
Technical information 81
●Photo paper sheets: Up to 30
Document feeder capacity (HP Smart Tank 750 series)
●Plain paper sheets (60 to 90 g/m2 [16 to 24 lb]): Up to 35
Paper type and size
●For a complete list of supported media, refer to the printer software or the embedded web server (EWS).
To open EWS, see To access and use EWS.
Paper weights
●Plain Paper: 60 to 105 g/m² (16 to 28 lb)
●Envelopes: 75 to 90 g/m² (20 to 24 lb)
●Cards: Up to 200 g/m² (110 lb) (HP Smart Tank 710-720, 750 series)
●Photo Paper: Up to 250 g/m² (66 lb)
Print specications
●Print speeds vary according to the complexity of the document
●Method: drop-on-demand thermal inkjet
●Language: PCL3 GUI
●For the print resolutions and margins, visit the product support website for details.
Copy specications
●Resolution: up to 600 dpi
●Digital image processing
●Copy speeds vary according to the complexity of the document and model
Scan specications
●Resolution: up to 1200 x 1200 ppi optical
For more information about ppi resolution, see the scanner software.
●Color: 24-bit color, 8-bit grayscale (256 levels of gray)
●Maximum scan size from glass: 21.6 x 29.7 cm (8.5 x 11.7 inches)
Power specications
●Input voltage: 100-240 Vac (+/- 10%)
●Input frequency: 50/60 Hz (+/- 3 Hz)
82 Appendix A Technical information
Regulatory notices
The printer meets product requirements from regulatory agencies in your country/region.
Regulatory Model Number
For regulatory identication purposes, your product is assigned with a Regulatory Model Number. The
regulatory model number should not be confused with the marketing names or product numbers.
FCC statement
The United States Federal Communications Commission (in 47 CFR 15.105) has specied that the following
notice be brought to the attention of users of this product.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and the receiver.
●Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
●Consult the dealer or an experienced radio/TV technician for help.
NOTE: If the product has an Ethernet / LAN port with metallic casing then use of a shielded interface cable
is required to comply with the Class B limits of Part 15 of FCC rules.
Modications (part 15.21)
Any changes or modications made to this device that are not expressly approved by HP may void the user’s
authority to operate the equipment.
For further information, contact: Manager of Corporate Product Regulations, HP Inc. 1501 Page Mill Road, Palo
Alto, CA 94304, U.S.A.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Power cord instructions
Make sure your power source is adequate for the product voltage rating. The voltage rating is on the product.
The product uses either 100-240 Vac (+/- 10%) or 200-240 Vac and 50/60 Hz (+/- 3 Hz).
CAUTION: To prevent damage to the product, use only the power cord that is provided with the product.
Regulatory notices 83
VCCI (Class B) compliance statement for users in Japan
Notice to users in Japan about the power cord
製品には、同梱された電源コードをお使い下さい。
同梱された電源コードは、他の製品では使用出来ません。
Visual display workplaces statement for Germany
GS-Erklärung (Deutschland)
Das Gerät ist nicht für die Benutzung im unmittelbaren Gesichtsfeld am Bildschirmarbeitsplatz vorgesehen.
Um störende Reexionen am Bildschirmarbeitsplatz zu vermeiden, darf dieses Produkt nicht im
unmittelbaren Gesichtsfeld platziert werden.
Noise emission statement for Germany
Geräuschemission
LpA < 70 dB am Arbeitsplatz im Normalbetrieb nach DIN 45635 T. 19
European Union and United Kingdom Regulatory Notice
Products bearing the CE marking and UK marking comply to applicable EU Directives and the equivalent UK
Statutory Instruments and can operate in at least one EU Member State and in Great Britain. The full EU
and UK Declaration of Conformity can be found at the following website: hp.eu/certicates (Search with the
product model name or its Regulatory Model Number (RMN), which may be found on the regulatory label.)
The point of contact for regulatory matters:
For EU: HP Deutschland GmbH, HP HQ-TRE, 71025 Boeblingen, Germany
For GB: HP Inc UK Ltd, Regulatory Enquiries, Earley West, 300 Thames Valley Park Drive, Reading, RG6 1PT
Email: techregshelp@hp.com
Declaration of conformity
Declaration of conformity can be found at www.hp.eu/certicates.
84 Appendix A Technical information
Regulatory wireless statements
This section contains regulatory information pertaining to wireless products.
Products with wireless functionality
EMF
This product meets international guidelines (ICNIRP) for exposure to radio frequency radiation.
If it incorporates a radio transmitting and receiving device that in normal use, a separation distance of 20 cm
ensures that radio frequency exposure levels comply with EU requirements.
Wireless functionality in Europe
For products with 802.11 b/g/n or Bluetooth radio:
●Radio frequency band: 2400-2483.5 MHz, with transmit power of 20 dBm (100 mW) or less.
For products with 802.11 a/b/g/n/ac radio:
●Radio frequency band: 2400-2483.5 MHz, with transmit power of 20 dBm (100 mW) or less.
●Radio frequency band: 5170-5330 MHz, with transmit power of 23 dBm (200 mW) or less.
●Radio frequency band: 5490-5730 MHz, with transmit power of 23 dBm (200 mW) or less.
●Radio frequency band: 5735-5835 MHz, with transmit power of 13.98 dBm (25 mW) or less.
IMPORTANT: IEEE 802.11x wireless LAN with 5.17-5.33 GHz frequency band is restricted for indoor use
only in all countries reected in the matrix. Using this WLAN application outdoor might lead to interference
issues with existing radio services.
Exposure to radio frequency radiation
CAUTION: The radiated output power of this device is far below the FCC radio frequency exposure limits.
Nevertheless, the device shall be used in such a manner that the potential for human contact during normal
operation is minimized. This product and any attached external antenna, if supported, shall be placed in
such a manner to minimize the potential for human contact during normal operation. In order to avoid the
possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be
less than 20 cm (8 inches) during normal operation.
Regulatory wireless statements 85
Notice to users in Canada
Under Innovation, Science and Economic Development Canada regulations, this radio transmitter may only
operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Innovation,
Science and Economic Development Canada. To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that necessary for successful communication.
This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired operation of
the device.
WARNING! Exposure to Radio Frequency Radiation. The radiated output power of this device is below the
Innovation, Science and Economic Development Canada radio frequency exposure limits. Nevertheless, the
device should be used in such a manner that the potential for human contact is minimized during normal
operation.
To avoid the possibility of exceeding the Innovation, Science and Economic Development Canada radio
frequency exposure limits, human proximity to the antennas should not be less than 20 cm (8 inches).
Conformément au Règlement d'Innovation, Science et Développement Economique Canada, cet émetteur
radioélectrique ne peut fonctionner qu'avec une antenne d'un type et d'un gain maximum (ou moindre)
approuvé par Innovation, Science et Développement Economique Canada. An de réduire le brouillage
radioélectrique potentiel pour d'autres utilisateurs, le type d'antenne et son gain doivent être choisis de
manière à ce que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas celle nécessaire à une
communication réussie.
Cet appareil est conforme aux normes RSS exemptes de licence d'Innovation, Science et Développement
Economique Canada. Son fonctionnement dépend des deux conditions suivantes : (1) cet appareil ne doit
pas provoquer d'interférences nuisibles et (2) doit accepter toutes les interférences reçues, y compris des
interférences pouvant provoquer un fonctionnement non souhaité de l'appareil.
AVERTISSEMENT relatif à l'exposition aux radiofréquences. La puissance de rayonnement de cet appareil se
trouve sous les limites d'exposition de radiofréquences d'Innovation, Science et Développement Economique
Canada. Néanmoins, cet appareil doit être utilisé de telle sorte qu'il doive être mis en contact le moins
possible avec le corps humain.
An d'éviter le dépassement éventuel des limites d'exposition aux radiofréquences d'Innovation, Science et
Développement Economique Canada, il est recommandé de maintenir une distance de plus de 20 cm entre les
antennes et l'utilisateur.
Notice to users in Japan
この機器は技術基準適合証明又は工事設計認証を受けた無線設備を搭載しています。
Notice to users in Taiwan
取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變 更頻率、加大功率或變更
原設計之特性及功能。低功率射頻器材之使用不得影響 飛航安全及干擾合法通信；經發現有干擾現象時，
應立即停用，並改善至無干擾 時方得繼續使用。前述合法通信，指依電信管理法規定作業之無線電通信。
低功 率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
86 Appendix A Technical information
Notice to users in Thailand (Wi-Fi)
Notice to users in Brazil
Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência
em sistemas devidamente autorizados.
Para maiores informações consulte o site da ANATEL www.anatel.gov.br.
Notice to users in Mexico
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo
o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier
interferencia, incluyendo la que pueda causar su operación no deseada.
Para saber el modelo de la tarjeta inalámbrica utilizada, revise la etiqueta regulatoria de la impresora.
Notice to users in Ukraine
Повідомлення для користувачів в Україні
Table A-1 Notice to users in Ukraine
Технологія, що використовується Радіочастотні діапазони Максимальна потужність передавання
WLAN Wi-Fi 802.11x (2,4 ГГц) 2400–2483,5 МГц < 100 мВт (20 дБм) ЕІВП
Bluetooth (2,4 ГГц) 2400–2483,5 МГц < 100 мВт (20 дБм) ЕІВП
Bluetooth з низьким енергоспоживанням
(2,4 ГГц)
2400–2483,5 МГц < 100 мВт (20 дБм) ЕІВП
Notice to users in Thailand (Wi-Fi) 87
Table A-1 Notice to users in Ukraine (continued)
Технологія, що використовується Радіочастотні діапазони Максимальна потужність передавання
WLAN Wi-Fi 802.11x (5 ГГц)
(Лише для використання в приміщенні)
5150–5350 МГц
5470–5835 МГц
< 100 мВт (20 дБм) ЕІВП
NOTE: Відповідні частотні діапазони та максимальна потужність передавання застосовуються, лише
якщо в пристрої використовується зазначена технологія підключення.
Notice to users in Canada (5 GHz)
CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its
operation in the 5.15- to 5.25-GHz frequency range. The Innovation, Science and Economic Development
Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce
the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated
as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause
interference with and/or damage to this device.
ATTENTION: Lors de l'utilisation du réseau local sans l IEEE 802.11a, ce produit se limite à une utilisation
en intérieur à cause de son fonctionnement sur la plage de fréquences de 5,15 à 5,25 GHz. Innovation, Science
et Développement Economique Canada stipule que ce produit doit être utilisé en intérieur dans la plage de
fréquences de 5,15 à 5,25 GHz an de réduire le risque d'interférences éventuellement dangereuses avec les
systèmes mobiles par satellite via un canal adjacent. Le radar à haute puissance est alloué pour une utilisation
principale dans une plage de fréquences de 5,25 à 5,35 GHz et de 5,65 à 5,85 GHz. Ces stations radar peuvent
provoquer des interférences avec cet appareil et l'endommager.
Notice to users in Taiwan (5 GHz)
應避免影響附近雷達系統之操作。
高增益指向性天線只得應用於固定式點對點系統。
Notice to users in Thailand (5 GHz)
Notice to users in Serbia (5 GHz)
Upotreba ovog uredjaja je ogranicna na zatvorene prostore u slucajevima koriscenja na frekvencijama od
5150-5350 MHz.
Accessibility
Learn more about our eorts to create accessible products, share your story, or connect with customer
support for accessibility help—all at hp.com/accessibility.
For more information about the accessibility of your printer, please visit Accessibility for HP inkjet printers.
Environmental product stewardship program
HP is committed to providing quality products in an environmentally sound manner. Design for recycling has
been incorporated into this product. The number of materials has been kept to a minimum while ensuring
88 Appendix A Technical information
proper functionality and reliability. Dissimilar materials have been designed to separate easily. Fasteners and
other connections are easy to locate, access, and remove using common tools. High priority parts have been
designed to access quickly for eicient disassembly and repair. For more information, visit HP's Commitment
to the Environment website at:
hp.com/sustainableimpact
HP tips for reducing environmental impact
●Choose from a wide variety of HP papers with FSC® or PEFCTM certication, which indicates that the paper
pulp came from a reputable and well-managed source.1
●Conserve resources-look for paper made with recycled content.
●Recycle your Original HP cartridges-it's easy and free with the HP Planet Partners program, available in 47
countries and territories worldwide.2
●Save paper by printing on both sides of the page.
●Conserve energy by choosing ENERGY STAR® certied HP products.
●Lower your carbon footprint-all HP printers include power management settings that help you control
energy use.
●Discover more ways HP and our customers are reducing environmental impact at HP EcoSolutions.
1 HP papers certied under FSC®C017543 or PEFC™TMPEFC/29-13-198.
2 Program availability varies. Original HP cartridge return and recycling is currently available in more than
50 countries, territories, and regions in Asia, Europe, and North and South America through the HP Planet
Partners program. For more information, visit: hp.com/recycle.
Eco-Tips
HP is committed to helping customers reduce their environmental footprint. Please visit the HP Eco Solutions
website for more information on HP’s environmental initiatives.
hp.com/sustainableimpact
European Union Commission Regulation 1275/2008
For product power data, including the power consumption of the product in networked standby
if all wired network ports are connected and all wireless network ports are activated,
please refer to section P15 ‘Additional Information’ of the product IT ECO Declaration at
hp.com/hpinfo/globalcitizenship/environment/productdata/itecodesktop-pc.html.
Paper
This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002.
Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the ability to
identify plastics for recycling purposes at the end of product life.
HP tips for reducing environmental impact 89
Safety data sheets
Safety Data Sheets, product safety and environmental information are available at hp.com/go/ecodata or on
request.
Recycling program
HP oers an increasing number of product return and recycling programs in many countries/regions, and
partners with some of the largest electronic recycling centers throughout the world. HP conserves resources
by reselling some of its most popular products. For more information regarding recycling of HP products,
please visit: hp.com/recycle
HP inkjet supplies recycling program
HP is committed to protecting the environment. The HP Inkjet Supplies Recycling Program is available in
many countries/regions, and lets you recycle used print cartridges and ink cartridges free of charge. For more
information, go to the following website: hp.com/recycle
Power consumption
HP printing and imaging equipment marked with the ENERGY STAR® logo is certied by the U.S. Environmental
Protection Agency. The following mark will appear on ENERGY STAR certied imaging products:
Additional ENERGY STAR certied imaging product model information is listed at: www.hp.com/go/energystar
Disposal of waste equipment by users
This symbol means do not dispose of your product with your other household waste. Instead, you should
protect human health and the environment by handing over your waste equipment to a designated collection
point for the recycling of waste electrical and electronic equipment. For more information, please contact your
household waste disposal service, or go to hp.com/recycle.
Waste disposal for Brazil
90 Appendix A Technical information
Este produto eletrônico e seus componentes não devem ser descartados no lixo comum, pois embora estejam
em conformidade com padrões mundiais de restrição a substâncias nocivas, podem conter, ainda que em
quantidades mínimas, substâncias impactantes ao meio ambiente. Ao nal da vida útil deste produto, o
usuário deverá entregá-lo à HP. A não observância dessa orientação sujeitará o infrator às sanções previstas
em lei.
Após o uso, as pilhas e/ou baterias dos produtos HP deverão ser entregues ao estabelecimento comercial ou
rede de assistência técnica autorizada pela HP.
Para maiores informações, inclusive sobre os pontos de recebimento, acesse:
hp.com.br/reciclar
Chemical substances
HP is committed to providing our customers with information about the chemical substances in our products
as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European
Parliament and the Council). A chemical information report for this product can be found at: hp.com/go/reach.
The Table of Hazardous Substances/Elements and their Content (China)
产品中有害物质或元素的名称及含量
根据中国《电器电子产品有害物质限制使用管理办法》
Table A-2 The Table of Hazardous Substances/Elements and their Content (China)
部件名称
有害物质
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
外壳和托盘◯ ◯ ◯ ◯ ◯ ◯
电线 ◯ ◯ ◯ ◯ ◯ ◯
印刷电路板 X◯ ◯ ◯ ◯ ◯
打印系统X◯ ◯ ◯ ◯ ◯
显示器 X◯ ◯ ◯ ◯ ◯
喷墨打印机墨盒 ◯ ◯ ◯ ◯ ◯ ◯
驱动光盘X◯ ◯ ◯ ◯ ◯
扫描仪X◯ ◯ ◯ ◯ ◯
网络配件 X◯ ◯ ◯ ◯ ◯
电池板 X◯ ◯ ◯ ◯ ◯
自动双面打印系统◯ ◯ ◯ ◯ ◯ ◯
外部电源X◯ ◯ ◯ ◯ ◯
本表格依据 SJ/T 11364 的规定编制。
◯：表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
X：表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。
Chemical substances 91
Table A-2 The Table of Hazardous Substances/Elements and their Content (China) (continued)
部件名称
有害物质
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
此表中所有名称中含 “X” 的部件均符合中国 RoHS 达标管理目录限用物质应用例外清单的豁免。
此表中所有名称中含 “X” 的部件均符合欧盟 RoHS 立法。
注：环保使用期限的参考标识取决于产品正常工作的温度和湿度等条件。
Declaration of the Presence Condition of the Restricted Substances Marking (Taiwan)
台灣 限用物質含有情況標示聲明書
Taiwan Declaration of the Presence Condition of the Restricted Substances Marking
若要存取產品的最新使用指南或手冊，請前往 hp.com/support。選取搜尋您的產品，然後依照 畫面上的指
示繼續執行。
To access the latest user guides or manuals for your product, go to hp.com/support. Select Find your product,
and then follow the on-screen instructions.
92 Appendix A Technical information
Restriction of hazardous substance (India)
This product, as well as its related consumables and spares, complies with the reduction in hazardous
substances provisions of the "India E-waste (Management and Handling) Rule 2016." It does not contain
lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in
concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for where allowed pursuant to
the exemptions set in Schedule 2 of the Rule.
Restriction on hazardous substances statement (Turkey)
Türkiye Cumhuriyeti: AEEE Yönetmeliğine Uygundur
EPEAT
Most HP products are designed to meet EPEAT. EPEAT is a comprehensive environmental rating that helps
identify greener electronics equipment. For more information on EPEAT go to epeat.net.
Click here for information on HP's EPEAT registered products.
SEPA Ecolabel User Information (China)
中国环境标识认证产品用户说明
噪声大于 63.0 dB(A) 的办公设备不宜放置于办公室内，请在独立的隔离区域使用。
如需长时间使用本产品或打印大量文件，请确保在通风良好的房间内使用。
如您需要确认本产品处于零能耗状态，请按下电源关闭按钮，并将插头从电源插座断开。
您可以使用再生纸，以减少资源耗费。
China Energy Label for Printer, Fax and Copier
复印机、打印机和传真机能源效率标识实施规则
依据“复印机、打印机和传真机能源效率标识实施规则”，该打印机具有中国能效标识。标识上显示的能效
等级和操作模式值根据“复印机、打印机和传真机能效限定值及能效等级”标准（“GB 21521”）来确定和计
算。
1. 能效等级
产品能效等级分 3 级，其中 1 级能效最高。能效限定值根据产品类型和打印速度由标准确定。能效等
级则根据基本功耗水平以及网络接口和内存等附加组件和功能的功率因子之和来计算。
2. 能效信息
喷墨打印机
●操作模式功率
睡眠状态的能耗按照 GB 21521 的标准来衡量和计算。该数据以瓦特 (W) 表示。
●待机功率
待机状态是产品连接到电网电源上功率最低的状态。该状态可以延续无限长时间，且使用者无法
改变此状态下产品的功率。对于“成像设备”产品，“待机”状态通常相当于“关闭”状态，但也可能相
当于“准备”状态或者“睡眠”状态。该数据以瓦特 (W) 表示。
●睡眠状态预设延迟时间
Restriction of hazardous substance (India) 93
出厂前由制造商设置的时间决定了该产品在完成主功能后进入低耗模式（例如睡眠、自动关机）
的时间。该数据以分钟表示。
●附加功能功率因子之和
网络接口和内存等附加功能的功率因子之和。该数据以瓦特 (W) 表示。
标识上显示的能耗数据是根据典型配置测量得出的数据，此类配置包含登记备案的打印机依据复印机、
打印机和传真机能源效率标识实施规则所选的所有配置。因此，该特定产品型号的实际能耗可能与标识
上显示的数据有所不同。
要了解规范的更多详情，请参考最新版的 GB 21521 标准。
Battery disposal in Taiwan
European Union Battery Directive
This product contains a battery that is used to maintain data integrity of real time clock or product settings
and is designed to last the life of the product. Any attempt to service or replace this battery should be
performed by a qualied service technician.
Battery notice for Brazil
A bateria deste equipamento nao foi projetada para ser removida pelo cliente.
California Perchlorate Material Notice
Perchlorate material - special handling may apply. See: dtsc.ca.gov/hazardouswaste/perchlorate
This product's real-time clock battery or coin cell battery may contain perchlorate and may require special
handling when recycled or disposed of in California.
94 Appendix A Technical information