Ignis IGT 6100 IT User Manual
Displayed below is the user manual for IGT 6100 IT by Ignis which is a product in the Washing Machines category. This manual has pages.
Related Manuals
EN
W112 06 150
Programme Care
Labels
Max.
Load
kg
Type of wash / Notes
Respect the manufacturer's recommendations on the care label
Detergents and Additives Special options Max.
Spin
Speed
rpm
Pre-
wash
Main
wash
Softener Start
delay
Avvio
ritardato
Pre-
wash
Pre-
lavaggio
Rapid
Turbo
Cold
wash
Lavaggio
a freddo
Intensive
rinse
Risciacquo
intensivo
Rinse
hold
Anti
piega
Spin
Centri-
fuga
Cotton
40 - 60 - 90 °C
Cotone
40 - 60 - 90 °C Max.
Normally to heavily soiled and robust laundry made of cotton and linen.
Automatically adapts programme duration and water consumption to the load size and thus allows
economical washing of even small loads.
iYes i i i i i i i i Max.
Mixed
40 °C
Misti
40 °C 3.5 Slightly to normally soiled textiles made of cotton and/or synthetics. –Yes i i – – i i i i Max.
Synthetics
40 °C
Sintetici
40 °C 3.0 Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon). iYes i i i i i i i i Max.
Delicates
40 °C
Delicati
40 °C 1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses. –Yes i i – – i–i i 8001)
Wool
20 °C
Lana
20 °C 1.0 Woollens, labelled with the Woolmark and identified as machine washable, as well as textiles made of silk
(keep to care label!), linen, wool and viscose marked as handwashable. –Yes i i – – – – i i Max.
Cotton Cotone Max.
Normally soiled cotton laundry.
At 40°C and 60°C standard cotton programme and most favourable programme in terms of combined water and
energy consumption for washing cotton laundry.
- Reference programme for the Energy Label.
–Yes i i – – – i i i Max.
Daily
60 °C
Biancheria 7 giorni
60 °C 3.0 The ideal cycle for accurate washing of linens, towels and bathrobes. iYes i i i –i i i i Max.
Kitchen
40 °C
Biancheria cucina
40 °C Max. Cycle designed to remove dirt from tablecloths and kitchen linens. –Yes i i – – i i i i Max.
Children
40 °C
Bambini
40 °C 3.5 The cycle is specially designed to remove the dirt that is typically found on children’s clothes. –Yes i i – – i i i i Max.
Curtains
30 °C
Tende
30 °C 1.5 Perfect program for washing and care of even the most delicate curtains. –Yes i i – – i–i i 8001)
Sport
40 °C
Sport
40 °C 3.0
For washing lightly soiled sports clothing (tracksuits, shorts, etc.). For best results, we recommend not
exceeding the maximum load. We recommend using liquid detergent, and adding the amount suitable for
half-load.
iYes i i i –i i i i Max.
Colours
30 °C
Colorati
30 °C 3.0 From lightly to normally soiled laundry made of cotton, synthetics or their blends; also delicates. Helps
preserving colours. iYes i i i i i i i i Max.
Speed 45´
30 °C
Rapido 45´
30 °C 3.5 The best daily washing solution. Particularly useful for lightly and normally soiled textiles made of cotton or
synthetic fabrics, as it washes at low temperature and a maximum spin speed. –Yes i i – – i–i i Max.
Rinse + Spin – Max. Same as the last rinse and the final spin in the “Cotton” programme. – – i i – – – i i i Max.
Spin + Drain – Max. In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. – – – i– – – – – iMax.
A. Programme selector
B. Time display
C. “Start delay” button
D. “Spin” button
E. “Start/Pause” button
F. Programme sequence indicator
G. “Reset” button
H. “Lid open” indication
This washing machine is equipped with
automatic safety functions which detect and
diagnose faults at an early stage and react
appropriately:
I. “Service” indication
J. “Water tap closed” indication
K. “Clean pump” indication
PROGRAMME CHART
A
BH
F
E
G
CD
J
I
K
Yes = dosing required / i = optional
1) For improved garment care, spin speed is restricted in these programmes. Ignis is a registered trademark of Whirlpool USA.
CONSUMPTION DATA Power consumption in off-mode 0.11 W / in left-on mode 0.11 W
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect
to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer to the
default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also
“Troubleshooting Guide” in your Instructions for Use).
Approximete remaining moisture content (%). After programme end and spinning with maximum selectable spin speed, in default programme setting.
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
** Reference Programmes for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature.
“Rapid” button
• Enables quicker washing by shortening the
programme duration.
• Recommendable for small loads or only lightly soiled
laundry.
“Cold wash” button
• Water is heated only up to 20°C.
• Suitable for delicate laundry items with wash
temperature recommendation of max. 30°C on the
care label.
• Selectable only on the lowest temperature step
of each programme.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very
soft water, washing baby linen and helping people
with allergies.
“Rinse Hold” button
• The laundry remains in the last rinse water without
progressing to the final spin cycle to avoid creasing
and prevent colours from changing.
• This option is particularly recommended for the
“Synthetics”, “Daily load” and “Delicates” programmes.
• It is useful if you want to postpone spinning to a later
time, or if you want to drain out only.
• If you select “Rinse Hold”, do not leave items to soak
for too long.
• As soon as the appliance stops in the rinse hold, the
“Rinse hold” lamp of the sequence indicator lights
up and the lamp next to the “Start/Pause” button
flashes.
Terminate the “Rinse Hold” option:
• Press the “Start/Pause” button; the programme
will terminate automatically with the final spin cycle
for the present wash programme.
• If you do not wish to spin the clothes, turn
the programme selector knob to the “Drain”
programme and press the “Start/Pause” button.
“Spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain during
the rinse. The water is drained out only.
START DELAY
The “Start delay” button allows the user to run the
machine at his convenience, for example at night when
electricity is cheaper. Do not use liquid detergent.
• Select programme, spin speed and options.
• Press the “Start delay” button several times to select
a delay time by 1 to 23 hours.
• Start the countdown of the “Start delay” by pressing
“Start/Pause”. the lamp over the “Start delay”
button blinks, and it goes off when the programme
starts.
• Once having pressed the “Start/Pause” button,
the countdown of the time delay begins. The time
delay indication on the display disappears when the
programme starts and is replaced by the remaining
programme time.
• After the “Start/Pause” button has been pressed,
the number of hours preselected can be reduced by
pressing again the “Start delay” button.
To cancel the “Start delay”
..before you press the “Start/Pause” button:
• Turn the programme selector to another position or
press the “Reset” button.
..after having pressed the “Start/Pause” button:
• Press the “Start/Pause” button - the delay time
disappears from the display.
PROGRAMME START
Open the tap and press the “Start/Pause” button.
The blinking light next to the “Start/Pause” button
becomes constant. The programme sequence indicator
shows the current programme phase, running from
left to right through Wash, Rinse, Spin/Drain. When
the programme phrase is finised, the corresponding
indication goes out.
1.
PREPARATION OF THE WASH CYCLE
Load the machine, close the drum doors and check
that they are properly locked.
2. Add detergent and eventual additives as described
on the front page and in your Instructions for use.
3. Close the lid.
4. Turn the programme selector to the desired
programme and temperature. The time display
shows the duration of the selected programme
(in hours and minutes), and the indicator for the
“Start/Pause” button flashes. The indicator for the
preset spin speed lights up. If you do not start the
programme soon after having made your choice, the
washing machine will switch off automatically after
about a quarter of an hour. Switch on the washing
machine again by turning the programme selector
back to “O“ and then to the desired programme.
SELECT ANY DESIRED OPTION
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time by
approximately 15 min.
• Do not use liquid detergent for main wash if you
have activated prewash option.
• Note: If there is a power interruption or if the
appliance is disconnected during the cycle, the
programme will run again from the point where it
was interrupted.
“LID OPEN” INDICATION
Before starting and after end of a programme, the lamp
lights to show the the lid can be opened. As long as a
wash programme is running, the lid remains locked and
must on no account be forced open. In case you have
an urgent need to open it during a running programme,
refer to “Cancel a running programme before the end”.
FAILURE INDICATIONS
In case of any failures or irregularities, consult the
“Troubleshooting Guide” in your Instructions for Use.
“Water tap closed” -
No or not sufficient inlet water.
“Service” -
Failure or malfunction of an electrical component.
“Clean pump” -
Waste water is not pumped out.
Spin speed on programme sequence indicator
blinks: unbalance during spinning
•
PROGRAMME END
The “Lid open” indication lights up and the display
show “End”. After about a quarter of an hour, the
washing machine will switch off completely to save
energy.
1. Turn the programme selector to the “O” position.
2. Close the water tap.
3. Open lid and drum and unload the machine.
4. Leave the lid open for some time to allow the interior
of the machine to dry.
1.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
Press the “Start/Pause” button to pause the
programme. The light blinks.
2. Select the new programme, temperature, any options
and another spin speed if you want.
3. Press the “Start/Pause” button again. The new
programme continues at the same position where the
previous programme was interrupted. Do not add
detergent for this programme.
CANCEL A RUNNING PROGRAMME BEFORE THE
END
The “Reset” button cancels a programme before the
end.
• Press the “Reset” button for at least 3 seconds. The
water is drained out; it may last a while until you can
open the lid.
Programme Tempe-
rature
(°C)
Load
(kg)
Water
(l)
Energy
without “Rapid”
(kWh)
Approx. Programme Duration (hrs : min)
%
without “Rapid” with “Rapid”
Cotton 90 6.0 53* 1.91 2:05 1:55
64
Cotton 60 6.0 60 0.99 3:00 1:45
Cotton 40 6.0 60 0.80 3:00 1:45
Mixed 40 3.5 43 0.47 0:59 -
Synthetics 40 3.0 45 0.52 1:50 0:59 47
Delicate 40 1.5 50 0.55 0:45 -
Wool 20 1.0 40 0.10 0:35 -
eCotton ** 60 6.0 48 0.78 4:00 -
62
eCotton ** 60 3.0 31 0.65 2:10 -
eCotton ** 40 3.0 31 0.59 2:00 -
Daily 60 3.0 50 0.90 2:05 -
Kitchen 40 6.0 48 0.65 2:50 -
Children 40 3.5 50 0.50 1:09 -
Curtains 30 1.5 50 0.50 0:45 -
Sport 40 3.0 50 0.53 2:09 -
Colours 30 3.0 45 0.45 1:46 0:55
Speed 45´ 30 3.5 43 0.40 0:45 -