iiyama G2230HS-B1 User Manual
Displayed below is the user manual for G2230HS-B1 by iiyama which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
ENGLISH
USER MANUAL
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes
to read this comprehensive manual carefully
before installing and switching on the monitor.
Please keep this manual in a safe place for
your future reference.
ENGLISH
ENGLISH
Wereservetherighttochangespecicationswithoutnotice.
All trademarks used in this user manual are the property of their respective owners.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
Eprel registration number : G-MASTER GB2230HS-B1: 357470, G-MASTER G2230HS-B1: 357433
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the address:
http://www.iiyama.com
YoucanaccesstheWebpageofdierentcountriesfromthere.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC
Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU
“RoHS Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in
residential areas, business and light industrial premises and small-scale enterprises, inside as
well as outside of the buildings. All places of operation are characterised by their connection to
the public low voltage power supply system.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PL2230HS
ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................ 1
SAFETY PRECAUTIONS................................................................1
SPECIAL NOTES ON LCD MONITORS .........................................3
CUSTOMER SERVICE ...................................................................3
CLEANING ......................................................................................3
BEFORE YOU OPERATE THE MONITOR ..........................................4
FEATURES......................................................................................4
CHECKING THE CONTENTS OF THE PACKAGE ........................4
INSTALLATION ...............................................................................5
FITTING AND REMOVAL OF BASE : G-MASTER GB2230HS ......7
FITTING AND REMOVAL OF BASE : G-MASTER G2230HS ........8
CONTROLS AND CONNECTORS : G-MASTER GB2230HS ........9
CONTROLS AND CONNECTORS : G-MASTER G2230HS ......... 10
CONNECTING YOUR MONITOR : G-MASTER GB2230HS ........ 11
CONNECTING YOUR MONITOR : G-MASTER G2230HS ..........12
DISCONNECTING YOUR MONITOR ...........................................13
COMPUTER SETTING .................................................................14
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE :
G-MASTER GB2230HS ................................................................14
ADJUSTING THE VIEWING ANGLE : G-MASTER G2230HS......15
OPERATING THE MONITOR .............................................................16
ADJUSTMENT MENU CONTENTS ..............................................17
SCREEN ADJUSTMENTS ............................................................28
STANDBY FEATURE ....................................................................31
TROUBLE SHOOTING ......................................................................32
RECYCLING INFORMATION .............................................................33
APPENDIX ........................................................................................34
SPECIFICATIONS : G-MASTER GB2230HS................................34
SPECIFICATIONS : G-MASTER G2230HS .................................. 35
DIMENSIONS : G-MASTER GB2230HS ......................................36
DIMENSIONS : G-MASTER G2230HS ......................................... 36
COMPLIANT TIMING ....................................................................37
ENGLISH
FOR YOUR SAFETY 1
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the
monitor and contact your dealer or iiyama service center immediately. Further use may be
dangerousandcancausereorelectricshock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
reorelectricshock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
anyobjectinsidemaycausere,electricshockordamage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Donotusewherewatermaybesplashedorspiltontothemonitorasitmaycausereorelectric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Besuretooperatethemonitoronlywiththespeciedpowersupply.Useofanincorrectvoltagewill
causemalfunctionandmaycausereorelectricshock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objectsonthecables.Ifdamaged,thecablesmaycausereorelectricshock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS
ENGLISH
2 FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or
smokyareasasitmaycausere,electricshockordamage.Youshouldalsoavoidareaswherethe
sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not
pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
re.Toallowadequateaircirculation,placethemonitoratleast10cm(or4inches)fromanywalls.
When removing the tilt stand, the ventilation slots on the back side of the monitor can be blocked.
This may overheat the monitor and may cause fire or damage. Make sure to allow enough
ventilation when removing the tilt stand. Operating the monitor on its back, side, upside down or on
a carpet or any other soft material may also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
Whenyoumovethemonitor,turnothepowerswitch,unplugthemonitorandbesurethesignal
cableisdisconnected.Ifyoudonotdisconnectthem,itmaycausereorelectricshock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable
itselfasthismaycausereorelectricshock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may
damage your computer.
CAREFUL! PROTECT YOUR HANDS AND FINGERS
Becarefulnottohurtyourngersorhandswhenyouchangetheheightortheangle.
Injurycanoccurifcareisnottakentoavoidngercontactwiththedisplaysbasewhenadjusting
theheight.(Justforheightadjustablemodel.)
REMARK FOR 24/7 USAGE
Thisproductisnotspecicallydesignedfor24/7usageinallenvironments.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
Foroptimalviewingcomfort,themonitorshouldbejustbeloweyeleveland40-60cm(16-24inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
ENGLISH
FOR YOUR SAFETY 3
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE
When you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture position to
the correct position.
You may find slightly uneven brightness on the screen depending on the desktop
pattern you use.
Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screencanberecoveredslowlybychangingtheimageorturningothePowerSwitch
for some hours.
SPECIAL NOTES ON LCD MONITORS
NOTE
If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
WARNING
If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.
CAUTION
Forsafety reasons, turnothe power switchandunplug the monitorbeforeyou
clean it.
NOTE
To protect the LCD panel, do not scratch or rub the screen with a hard object.
Never use any of the following strong solvents. These will damage the cabinet and
the LCD screen.
Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
Thinner
Benzine
Abrasive cleaner
Spray-type cleaner
Wax
Acid or Alkaline solvent
CABINET Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
LCD
SCREEN
Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
CUSTOMER SERVICE
CLEANING
ENGLISH
4 BEFORE YOU OPERATE THE MONITOR
The following accessories are included in your package. Check to see if they are enclosed with
the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional
iiyamaoce.
*1 The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used. However, all guarantees and warranties are void for any
problems or damage caused by a power cable not supplied by iiyama.
An approved power cable greater or equal to H05VVF, 3G, 0.75mm2 must be
used.
*2 Accessory for G-MASTER G2230HS.
*3 Accessory for G-MASTER GB2230HS.
Power Cable*1
HDMI Cable Stand-Base*2
Stand-Neck*2 Stand-Base with a screw*3 Cable Holder*2
Safety Guide Quick Start Guide
BEFORE YOU OPERATE THE MONITOR
CHECKING THE CONTENTS OF THE PACKAGE
CAUTION
FEATURES
Supports Resolutions up to 1920 × 1080
High Contrast 1000:1 (Typical), Adv. Contrast Function Available / Brightness
250cd/m2 (Typical)
Quick Response Time 0.8ms (Min, Gray to Gray)
Blue Light Reducer
Digital Character Smoothing
Automatic Set-up
Stereo Speakers
2 × 1W Stereo Speakers
Standby Feature (VESA DPMS Compliant)
VESA Mounting Standard (100mm×100mm) Compliant
Keyhole for Security Lock
ENGLISH
BEFORE YOU OPERATE THE MONITOR 5
When you use with the wall mounting, in consideration of thickness of the mounting
stage,tightentheM4Screws(4pcs)withwasherwhich“L”lengthis7mmtofasten
the monitor. Using the screw longer than this may cause electric shock or damage
because it may contact with the electrical parts inside the monitor.
WARNING
Screw
Chassis
Mounting Stage
L
INSTALLATION
< WALL MOUNTING >
WARNING
Before installation, make sure the wall, ceiling or desktop arm is strong enough to
hold the necessary weight of the monitor and the mount.
ENGLISH
6 BEFORE YOU OPERATE THE MONITOR
< ROTATING THE MONITOR >
NOTE
Adjust the monitor’s height before panel rotation.
Attempting to rotate the panel forcibly without adjusting the stand height may cause
damage to the panel or the stand.
The monitor is designed to be compatible with both landscape and portrait modes.
Video card for portrait display will be required for rotating the image on the screen.
With Stand:
●G-MASTER GB2230HS
●G-MASTER G2230HS
It is designed to be compatible in landscape mode.
Landscape
A
Available
Power Indicator
Portrait
A
A
Not Available
A
Power Indicator
Power Indicator
A
A
Portrait
Available
Power Indicator
Landscape
A
A
Not Available
Power Indicator
ENGLISH
BEFORE YOU OPERATE THE MONITOR 7
FITTING AND REMOVAL OF BASE : G-MASTER GB2230HS
CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid an electric shock or a
damage.
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Laythemonitoratonatablewithfrontfacedown.
Loosen the ‘thumb screw’ to remove the Stand-Base from the monitor.
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Laythemonitoratonatablewithfrontfacedown.
Install the Stand-Base as shown on above picture.
Use the ‘thumb screw’ provided to secure the Stand-Base to the monitor.
Stand-Base
Hook
ThumbscrewforStand-Basexing
Stand-Base
ENGLISH
8 BEFORE YOU OPERATE THE MONITOR
FITTING AND REMOVAL OF BASE : G-MASTER G2230HS
CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid an electric shock or a
damage.
<Removal>
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitoratonatablewithfrontfacedown.
Keep pressing the hooks inward to pull out the Stand-
Base.
Press the hook on the back of the monitor and remove
the Stand-Neck from the monitor.
<Installation>
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitoratonatablewithfrontfacedown.
Hold the monitor and install the Stand-Neck to the
monitor until it clicks to secure.
Hold the monitor and install the Stand-Base to the
stand-neck until it clicks to secure.
Place the Cable Holder.*
Hook Hooks
Stand-Base
Stand-Neck
Cable Holder
* The cable holder cannot be removed after installation.
NOTE
ENGLISH
BEFORE YOU OPERATE THE MONITOR 9
Power Indicator
Blue: Normal operation
Orange: Standby mode
PowerSwitch()
Menu/SelectButton(ENTER)
ScrollUp/VolumeButton( / )
ScrollDown/ECOModeButton( / )
Exit/i-StyleColorButton(EXIT)
InputSelectButton(INPUT)
Speakers
Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
VGAConnector(VGA)
HDMIConnector(HDMI)
DisplayPortConnector(DP)
Cable Hole
HeadphoneConnector( )
AudioConnector(LINEIN)
ACConnector( :Alternatingcurrent)( )
NOTE
NOTE
CONTROLS AND CONNECTORS : G-MASTER GB2230HS
<Front> <Back>
ENGLISH
10 BEFORE YOU OPERATE THE MONITOR
CONTROLS AND CONNECTORS : G-MASTER G2230HS
<Front> <Back>
Power Indicator
Blue: Normal operation
Orange: Standby mode
PowerSwitch()
Menu/SelectButton(ENTER)
ScrollUp/VolumeButton( / )
ScrollDown/ECOModeButton( / )
Exit/i-StyleColorButton(EXIT)
InputSelectButton(INPUT)
Speakers
Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
VGAConnector(VGA)
HDMIConnector(HDMI)
DisplayPortConnector(DP)
Installation hole of Cable Holder
HeadphoneConnector( )
AudioConnector(LINEIN)
ACConnector( :Alternatingcurrent)( )
Hook
NOTE
NOTE
ENGLISH
BEFORE YOU OPERATE THE MONITOR 11
CONNECTING YOUR MONITOR : G-MASTER GB2230HS
Ensurethatboththecomputerandthemonitorareswitchedo.
Connect the computer to the monitor with the signal cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
ConnectthePowerCabletothemonitorrstandthentothepowersource.
Turn on your monitor and computer.
[Example of Connection]
<Back>
NOTE Makesurethatthebuildinginstallationhasacircuitbreakerof120/240V,20A(maximum).
The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regionaliiyamaoce.
Makesureyoutightenthengerscrewsateachendofthesignalcable.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing
loss.
[ Collect Cables ]
Put the cables through the cable hole to bundle
them.
* VGA cable is not supplied with the monitor. If you use low quality VGA cable, it may cause a result
of electro-magnetic interference. Please contact the iiyama Support Centre in your country if you
wish to connect the monitor via the VGA input.
AV Equipment etc.
Audio Cable (Not included)
Computer
VGA Cable (Not included)*
DisplayPort Cable (Not included)
HDMI Cable (Accessory)
Power Cable (Accessory)
ENGLISH
12 BEFORE YOU OPERATE THE MONITOR
CONNECTING YOUR MONITOR : G-MASTER G2230HS
Ensurethatboththecomputerandthemonitorareswitchedo.
Connect the computer to the monitor with the signal cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
ConnectthePowerCabletothemonitorrstandthentothepowersource.
Turn on your monitor and computer.
[Example of Connection]
<Back>
NOTE Makesurethatthebuildinginstallationhasacircuitbreakerof120/240V,20A(maximum).
The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regionaliiyamaoce.
Makesureyoutightenthengerscrewsateachendofthesignalcable.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing
loss.
* VGA cable is not supplied with the monitor. If you use low quality VGA cable, it may cause a result
of electro-magnetic interference. Please contact the iiyama Support Centre in your country if you
wish to connect the monitor via the VGA input.
AV Equipment etc.
Audio Cable (Not included)
Computer
VGA Cable (Not included)*
DisplayPort Cable (Not included)
HDMI Cable (Accessory)
Power Cable (Accessory)
[ Collect Cables ]
Put the cables through the cable holder to bundle
them.
ENGLISH
BEFORE YOU OPERATE THE MONITOR 13
DISCONNECTING YOUR MONITOR
Ensurethatboththecomputerandthemonitorareswitchedo.
DisconnectthepowersourcerstandthenthePowerCablefromthemonitor.
Disconnect the signal cable from the computer and the monitor.
Disconnect the audio cable from the computer and the monitor.
ENGLISH
14 BEFORE YOU OPERATE THE MONITOR
Signal Timing
Change to the desired signal timing listed on page 37: COMPLIANT TIMING.
COMPUTER SETTING
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : G-MASTER GB2230HS
For optimal viewing it is recommended to
position yourself directly opposite to the full face
of the monitor, then adjust the monitor’s height
and angle to your own preference.
Hold the panel so that the monitor does not topple
when you change the monitor’s height or angle.
You are able to adjust the monitor's height up
to 130mm, angle up to 45° right and left, 22°
upward and 5° downward.
Do not touch the LCD screen when you
change the height or the angle. It
may cause damage or break the LCD
screen.
Careful attention is required not to pinch
your fingers or hands into the moving
part of the stand when you change the
height or the angle.
Injury can occur if care is not taken to
avoidngercontactwiththedisplays
base when adjusting the height.
NOTE
Monitor
Stand
130m
m
45° 45°
ENGLISH
BEFORE YOU OPERATE THE MONITOR 15
For optimal viewing it is recommended to look at the full face
of the monitor.
Hold the stand so that the monitor does not topple when you
change the monitor’s angle.
You are able to adjust the monitor’s angle up to 22° upward,
5° downward.
In order to ensure a healthy and relaxed body position
when using the monitor at visual display workstations, it is
recommended that the adjusted tilt angle should not exceed
10°. Adjust the monitor’s angle to your own preference.
ADJUSTING THE VIEWING ANGLE : G-MASTER G2230HS
NOTE Do not touch the LCD screen when you change
the angle. It may cause damage or break the LCD
screen.
Careful attention is required not to pinch your
ngersorhandsintothemovingpartofthestand
when you change the angle.
5° 22°
ENGLISH
16 OPERATING THE MONITOR
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 37. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 28 for SCREEN ADJUSTMENTS.
When button operations are aborted during adjustment, On-Screen Display disappears when the
timesetfortheOSDTimeouthaspassed.Also,presstheEXITbuttontoquicklyturnotheOn-
Screen Display.
Any changes are automatically saved in the memory when the On Screen Display
disappears.
TurningothepowershouldbeavoidedwhileusingtheMenu.
Adjustments for Horizontal / Vertical Position, Pixel Clock and Phase are saved for each signal
timing. Except for these adjustments, all other adjustments have only one setting which applies to
all signal timings.
NOTE
For example, to correct for vertical position, select Menu item of Geometry and then press the
ENTER Button. Then, select Vertical Position by using the / Buttons.
An adjustment page appears after you press the ENTER Button. Then, use the / Buttons
to change the vertical position settings. The vertical position of the overall display should be
changing accordingly while you are doing this.
Press the EXIT Button lastly, it ends, all changes are saved in the memory.
Press the ENTER Button to start the On Screen Display feature. There are additional
Menu items which can be switched by using the / Buttons.
Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Press the ENTER Button. Then, use the / Buttons to
highlight the desired adjustment icon.
Press the ENTER Button again. Use the / Buttons to make the appropriate
adjustment or setting.
Press the EXIT Button to leave the menu, and the settings you just made would be
automatically saved.
PICTURE ADJUST
MISCELLANEOUS
COLOR SETTINGS
LANGUAGE
RECALL
GEOMETRY
INPUT SELECT
AUDIO SETTINGS
SETUP MENU
G-MASTER GB2230HS
GEOMETRY
AUTO ADJUST
HORIZONTAL POSITION
PIXEL CLOCK
PHASE
VERTICAL POSITION
ENGLISH
OPERATING THE MONITOR 17
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option Button to Press
Auto Adjust
Auto Adjust * Adjust H. / V. Position, Clock and Phase automatically.
G-MASTER GB2230HS
CLICK ENTER AGAIN TO AUTO ADJUST
AUTO ADJUST
PICTURE ADJUST
MISCELLANEOUS
COLOR SETTINGS
LANGUAGE
RECALL
GEOMETRY
INPUT SELECT
AUDIO SETTINGS
SETUP MENU
AUTO ADJUST
* Only Analog Input.
For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 28 for
SCREEN ADJUSTMENTS.
ENGLISH
18 OPERATING THE MONITOR
Adjustment Item Problem / Option Button to Press
Picture Adjust *1
Too dull
Too intense
Brightness *2,3,4
Contrast *3
Too dark
Too bright
*1 Picture Adjust is disabled when i-Style Color is activated.
*2
Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright.
*3 Contrast, Brightness and ECO adjustments are disabled when Adv. Contrast is activated.
*4 Brightness and Adv. Contrast adjustment are disabled when ECO is activated.
Adv. Contrast *4
Typical Contrast Ratio
O
On Increased Contrast Ratio
Overdrive
O/-2/-1/0/+1/+2
It will improve the gray level response time of the LCD panel.
A higher level results in a faster response time.
You can skip the Menu items and directly display an option settting screen by using the following
button operations.
ECO : Press the Button when the Menu is not displayed.
Blue Light Reducer : Press and hold the EXIT Button for 2-3 seconds when the Menu is not
displayed.
Direct
Brightness of back-light is reduced.
O Normal
ECO *3Mode1
Brightness of back-light is reduced more than Mode1.
Mode2
Brightness of back-light is reduced more than Mode2.
Mode3
Direct
Blue Light Reducer
O Typical
Mode1 Blue light is reduced.
Mode2 Blue light is reduced more than Mode1.
Mode3 Blue light is reduced more than Mode2.
PICTURE ADJUST
MISCELLANEOUS
COLOR SETTINGS
LANGUAGE
RECALL
GEOMETRY
INPUT SELECT
AUDIO SETTINGS
SETUP MENU
G-MASTER GB2230HS
PICTURE ADJUST
BRIGHTNESS
CONTRAST
OVERDRIVE OFF
ADV. CONTRAST ON OFF
OFF
OFF
1.8
ECO
BLUE LIGHT REDUCER
GAMMA
BLACK TUNER
COLOR SATURATION
AUTO ADJUST
Direct
Black Tuner From-5to+5
You can adjust Dark shades.
Gamma You can set the Gamma.
1.8 / 2.2 / 2.6
Color Saturation Too weak
Too strong
ENGLISH
OPERATING THE MONITOR 19
Adjustment Item Problem / Option Button to Press
Geometry *
PICTURE ADJUST
MISCELLANEOUS
COLOR SETTINGS
LANGUAGE
RECALL
GEOMETRY
INPUT SELECT
AUDIO SETTINGS
SETUP MENU
G-MASTER GB2230HS
GEOMETRY
AUTO ADJUST
HORIZONTAL POSITION
VERTICAL POSITION
PIXEL CLOCK
PHASE
Phase
Pixel Clock
Too left
Too right
Too low
Too high
Horizontal Position
Vertical Position
Too narrow
Too wide
Tocorrectickeringtextorlines
* Only Analog Input.
See page 28 for SCREEN ADJUSTMENTS.
ENGLISH
20 OPERATING THE MONITOR
Input Source
InputsourceisxedanditwillnotbedetectedautomaticallywhenyouselectVGA,HDMI
or DisplayPort.
NOTE
Adjustment Item Problem / Option Button to Press
Input Select
Direct
You can skip the Menu items and directly display an option setting screen by using the following
button operations.
Input Select : Press the INPUT Button when the Menu is not displayed.
Direct
Search for an available input source and select
automatically.
Auto
SelecttheAnalog(VGA)input.
SelecttheDigital(HDMI)input.
VGA
HDMI
SelecttheDigital(DisplayPort)input.
DisplayPort(DP)
DISPLAYPORT(DP)
G-MASTER GB2230HS
INPUT SOURCE
AUTO MANUAL
MANUAL
SELECT
SELECT
HDMI SELECT
PICTURE ADJUST
MISCELLANEOUS
COLOR SETTINGS
LANGUAGE
RECALL
GEOMETRY
INPUT SELECT
AUDIO SETTINGS
SETUP MENU
AUTO ADJUST
VGA
Manual
ENGLISH
OPERATING THE MONITOR 21
Adjustment Item Problem / Option Button to Press
Audio Settings
Volume Too soft
Too loud
Mute Audio Turnothesoundtemporarily.
Return the sound volume to the previous level.
On
O
Press the ( )ButtontodisplaythevolumeadjustmentbarandswitchOnandOthe
Mute function by pressing the / Buttons.
NOTE
Select the Line-In input. LINE-IN
Select the HDMI input. HDMI
Audio Input *
* For HDMI/DisplayPort inputs only.
Direct
You can skip the Menu items and directly display an adjustment scale by using the following button
operations.
Volume : Press the Button when the Menu is not displayed.
Direct
Select the DisplayPort input. DP
VOLUME
OPTIONS
MUTE AUDIO ON OFF
G-MASTER GB2230HS
PICTURE ADJUST
MISCELLANEOUS
COLOR SETTINGS
LANGUAGE
RECALL
GEOMETRY
INPUT SELECT
AUDIO SETTINGS
SETUP MENU
AUTO ADJUST
AUDIO INPUT HDMI DP LINE IN
ENGLISH
22 OPERATING THE MONITOR
Adjustment Item Problem / Option Button to Press
Color Settings *
* Color Settings is disabled when i-Style Color or Blue Light Reducer is activated.
Too weak
Too strong
User Preset
Red
Green
9300K
7500K
6500K
Blue
Color Temperature
G-MASTER GB2230HS
COLOR TEMPERATURE
9300K 7500K 6500K
USER PRESET
RED
GREEN
BLUE
PICTURE ADJUST
MISCELLANEOUS
COLOR SETTINGS
LANGUAGE
RECALL
GEOMETRY
INPUT SELECT
AUDIO SETTINGS
SETUP MENU
AUTO ADJUST
Cool color
Normal color
Warm color
ENGLISH
OPERATING THE MONITOR 23
Adjustment Item Problem / Option Button to Press
Miscellaneous
Sharp and Soft
1 2 3 4 5 6
Youcanchangethepicturequalityfrom1to6(sharp
tosoft).
Press the Button to change the picture quality in
numerical order. Press the Button to change the
picture quality in reverse numerical order.
Video Mode Adjust
G-MASTER GB2230HS
MISCELLANEOUS
I-STYLE COLOR
SHARP AND SOFT
HDMI RGB RANGE
VIDEO MODE ADJUST
STANDARD
LIMITED
FULL
FULL
PICTURE ADJUST
MISCELLANEOUS
COLOR SETTINGS
LANGUAGE
RECALL
GEOMETRY
INPUT SELECT
AUDIO SETTINGS
SETUP MENU
AUTO ADJUST
STORE USER SETTING
USER MODES USER MODE1
Full screen display
Full
Aspect *2Expansion display of Aspect
*1 i-Style Color adjustment is disabled when Blue Light Reducer is activated.
*2 Option is unavailable with 16:9 resolution.
i-Style Color *1
Standard For general windows environment and monitor
default setting.
O Return to a state set by color adjustment
except i-Style Color.
Text For text editing and viewing in a word
processing environment.
Sport Game For Sports game environment.
FPS Game For FPS game environment.
Strategy Game For Strategy game environment.
Mode 1
Mode 3
Mode 2
Applies customized monitor settings.
Applies customized monitor settings.
Applies customized monitor settings.
Direct
HDMI RGB Range Full
Limited
For full-range color scale signal
For limited color scale signal
Store User Setting Save the settings of the screen
adjustment.
User Mode 1
User Mode 3
NOTE
User Mode 2
You can memorize your customized monitor settings.
The following settings can be memorized:
Contrast, Brightness, Overdrive, Adv. Contrast, ECO mode, Volume, Mute Audio, Color
Setting, i-Style Color, Sharp and Soft, Black Tuner, Video Mode Adjust
User Modes
You can skip the Menu items and directly display an option setting screen by using the following
button operations.
i-Style Color : Press the EXIT Button when the Menu is not displayed.
Direct
ENGLISH
24 OPERATING THE MONITOR
Adjustment Item Problem / Option Button to Press
Language
Language
English
Deutsch
English
German
Français French
Japanese
Polski Polish
Dutch
Italiano Italian Russian
Español Spanish
Nederlands
Czech
Ĉesky
G-MASTER GB2230HS
FRANÇAIS
DEUTSCH
ITALIANO
POLSKI
ESPAÑOL
NEDERLANDS
ČESKÝ
РУССКИЙ
ENGLISH
PICTURE ADJUST
MISCELLANEOUS
COLOR SETTINGS
LANGUAGE
RECALL
GEOMETRY
INPUT SELECT
AUDIO SETTINGS
SETUP MENU
AUTO ADJUST
ENGLISH
OPERATING THE MONITOR 25
OSD Time You can set the OSD display duration time between
5 and 30 seconds.
Adjustment Item Problem / Option Button to Press
Setup Menu
OSD Horizontal Position OSD is too left
OSD is too right
OSD is too low
OSD is too high
OSD Vertical Position
G-MASTER GB2230HS
OSD HORIZONTAL POSITION
OSD VERTICAL POSITION
OSD TIME
AMD FreeSync
OPENING LOGO ON OFF
ON OFF
SETUP MENU
PICTURE ADJUST
MISCELLANEOUS
COLOR SETTINGS
LANGUAGE
RECALL
GEOMETRY
INPUT SELECT
AUDIO SETTINGS
SETUP MENU
AUTO ADJUST
DISPLAY INFORMATION 1920x1080 75Hz HDMI
iiyama Logo is displayed when the monitor is
turned on.
O
On
iiyama Logo is not displayed when the monitor
is turned on.
Opening Logo
Display Information
See your graphic card user guide for more information
about changing the resolution and refresh.
NOTE
Displays information regarding the current input signal coming
from the graphic card in your computer.
AMD FreeSync On
O TheFreeSyncfunctionisturnedo.
Enable the FreeSync function.
ENGLISH
26 OPERATING THE MONITOR
Adjustment Item Problem / Option Button to Press
Recall
Recall Factory-preset data is restored.
G-MASTER GB2230HS
RECALL ALL?
RECALL
PICTURE ADJUST
MISCELLANEOUS
COLOR SETTINGS
LANGUAGE
RECALL
GEOMETRY
INPUT SELECT
AUDIO SETTINGS
SETUP MENU
AUTO ADJUST
ENGLISH
OPERATING THE MONITOR 27
Lock Mode
<OSD Menu>
The OSD can be locked to avoid an accidental setting change.
1. Make sure the monitor is turned ON.
2. The OSD lock will be activated by pressing the front ENTER Button for about 10 seconds. If you
try to access the OSD by pressing any of the buttons, a message "OSD Locked" will appear on
the screen.
3. The OSD lock will be deactivated by pressing the front ENTER Button again for about 10
seconds.
<Power Switch>
The Power Switch can be locked to avoid an accidental power operation.
1. Make sure the monitor is turned ON.
2. The Power Switch lock will be activated by pressing the front Button for about 10 seconds. If
youtrytoturnothemonitorbypressingthePowerSwitch,amessage"PowerButtonLocked"
will appear on the screen.
3. The Power Switch lock will be deactivated by pressing the front Button again for about 10
seconds.
ENGLISH
28 OPERATING THE MONITOR
SCREEN ADJUSTMENTS
The screen adjustments described in this manual are designed to set image position and minimize
ickerorblurfortheparticularcomputerinuse.
The monitor is designed to provide the best performance at resolution of 1920 × 1080, but can not
provide the best at resolutions of less than 1920 × 1080 because the picture is automatically stretched
totthefullscreen.Itisrecommendedtooperateatresolutionof1920×1080innormaluse.
Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to
the screen enlargement process.
It is preferable to adjust the image position and frequency with the monitor controls, rather than
the computer software or utilities.
Perform adjustments after a warm-up period of at least thirty minutes.
Additional adjustments may be required after the Auto Adjust depending on the resolution or
signal timing.
The Auto Adjust may not work correctly when displaying the picture other than the screen
adjustment pattern. In this case, manual adjustments are required.
There are two ways to adjust the screen. One way is automatic adjustment for Position, Pixel Clock
and Phase. The other way is performing each adjustment manually.
PerformtheAutoAdjustrstwhen the monitoris connected toa newcomputer, or resolutionis
changed. If the screen has a flicker or blur, or the picture does not fit in the display area after
performing the Auto Adjust, manual adjustments are required. Both adjustments should be made by
usingthescreenadjustmentpattern(Test.bmp)obtainedviatheIIYAMAwebsite(http://www.iiyama.
com).
Adjust the image by following the procedure below to get the desired picture.
This manual explains adjustment under Windows® OS.
Display the picture at the optimum resolution.
Enter the Test.bmp (screen adjustment pattern) to wallpaper.
Consult the appropriate documentation for doing this.
Set the display position to center in the wallpaper setting dialogue box.
[Adjustment pattern]
Zebra pattern
Color bar
Picture frame
NOTE
Adjust the image by following the procedure below to get the desired picture when selecting Analog input.
ENGLISH
OPERATING THE MONITOR 29
1) Adjust the H.Position so that the left side of the picture frame will move to the left edge
of the display area.
When the left side of the picture frame moves apart from the left edge of the display
areaduringthePixelClockadjustment,adjuststeps1)and2).
Another way to make the Pixel Clock adjustment is to correct the vertical wavy lines
in the zebra pattern.
ThepicturemayickerduringthePixelClock,H.PositionandV.Positionadjustment.
In case the picture frame is bigger or smaller than the data display area after the
Pixel Clock adjustment, repeat steps from .
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the Pixel Clock.
Perform the auto adjustment. (Auto Adjust)
Adjusttheimagemanuallybyfollowingprocedurebelowwhenthescreenhasaickeror
blur,orthepicturedoesnottinthedisplayareaafterperformingtheAutoAdjust.
AdjusttheV.Positionsothatthetopandbottomofthepictureframewillttothedisplay
area.
NOTE
ENGLISH
30 OPERATING THE MONITOR
Adjust the Brightness and Color to get the desired picture after you complete the Pixel
Clock and Phase adjustments.
Put back your favorite wallpaper.
AdjustthePhasetocorrecthorizontalwavynoise,ickerorblurinthezebrapattern.
NOTE Incasethestrongickerorblursremainonapartofthescreen,repeatsteps and
because the Pixel Clock may not be adjusted correctly.
Adjust the H.Position after the Phase adjustment if the horizontal position moves
during the adjustment.
ENGLISH
OPERATING THE MONITOR 31
Evenwhenusingthestandbymode,themonitorconsumeselectricity.TurnothePower
Switch whenever the monitor is not in use, during the night and weekends, to avoid
unnecessary power consumption.
NOTE
STANDBY FEATURE
Standby Mode
Whenthevideosignal from thecomputer is o,the monitorenters into StandbyMode which
reduces the power consumption to less than 0.5W*. The screen becomes dark, and the power
indicator turns to orange. From Standby Mode, the image reappears in several seconds when
either the keyboard or the mouse are touched again.
The standby feature of this product complies with power saving requirement of VESA DPMS. When
activated, it automatically reduces unnecessary power consumption of the monitor when your
computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There
is a standby step the monitor takes as described below. The standby function, including any timer
settingsisconguredbytheoperatingsystem.Checkyouroperatingsystemmanualforinformation
onhowthiscanbecongured.
* Audio equipment is not connected.
0 0.5W 100%
POWER
CONSUMPTION
Blue
Orange
Power Indicator
NORMAL MODE
STANDBY MODE
*
ENGLISH
32 TROUBLE SHOOTING
TROUBLE SHOOTING
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem
you have. If the monitor does not get a picture, skip to 2.
2.ConsultthefollowingitemsifyoucannotndanappropriateadjustmentiteminOPERATINGTHE
MONITOR or if the problem persists.
3. If you are experiencing a problem which is not described below or you cannot correct the
problem, discontinue using the monitor and contact your dealer or iiyama service center for further
assistance.
Problem Check
(Powerindicator
isorange.)
The screen is not
synchronized.
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
(Powerindicator
isblue.)
The picture does
not appear.
(Powerindicator
doesnotlightup.)
The screen
position is not in
the center.
The screen is too
bright or too dark.
ThePowerCableisrmlyseatedinthesocket.
The Power Switch is turned ON.
The AC socket is live. Please check with another piece of equipment.
If the blank screen saver is in active mode, touch the keyboard or the
mouse.
Increase the Contrast and/or Brightness.
The computer is ON.
The Signal Cable is properly connected.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
If the monitor is in standby mode, touch the keyboard or the mouse.
The computer is ON.
The Signal Cable is properly connected.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
The Signal Cable is properly connected.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
The videooutput levelof the computeris withinthe specication ofthe
monitor.
ENGLISH
TROUBLE SHOOTING / RECYCLING INFORMATION 33
The screen is
shaking.
Thepowervoltageiswithinthespecicationofthemonitor.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
Theaudioequipment(computeretc.)isON.
The Audio Cable is properly connected.
The Volume is turned up.
The Mute is ON.
Theaudiooutputleveloftheaudioequipmentiswithinthespecicationof
the monitor.
Theaudiooutputleveloftheaudioequipmentiswithinthespecicationof
the monitor.
The Audio Cable is properly connected.
Problem Check
No sound.
For better environment protection please don't dispose your monitor.
Please visit our web site: www.iiyama.com for monitor recycling.
RECYCLING INFORMATION
The sound is too
loud or too quiet.
A strange noise is
heard.
ENGLISH
34 APPENDIX
APPENDIX
Designandspecicationsaresubjecttochangewithoutpriornotice.
SPECIFICATIONS : G-MASTER GB2230HS
* Audio equipment is not connected.
NOTE
Size Category 22"
LCD
Panel
Panel technology
TN
Size Diagonal:21.5"(54.7cm)
Pixel pitch 0.248mm H × 0.248mm V
Brightness 250cd/m2(Typical)
Contrast ratio 1000:1(Typical),Adv.ContrastFunctionAvailable
Viewable angle
Right / Left : 85
°
each, Up / Down : 80
°
each(Typical)
Response time 0.8ms(Min,GraytoGray)
Display Colors Approx. 16.7M
Sync Frequency Analog: Horizontal: 30.0-83.0kHz, Vertical: 55-75Hz
Digital: Horizontal: 30.0-85.0kHz, Vertical: 55-75Hz
Native Resolution 1920 × 1080, 2.1 MegaPixels
Support max. resolution
VGA: 1920 × 1080 60Hz
HDMI: 1920 × 1080 75Hz
DisplayPort: 1920 × 1080 75Hz
Input Connector VGA, HDMI, DisplayPort
Plug & Play VESA DDC2BTM
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal Analog:0.7Vp-p(Standard),75Ω, Positive
Digital: HDMI, DisplayPort
Input Audio Connector ø3.5mmminijack(Stereo)
Input Audio Signal 1.0Vrms maximum
Headphone Connector ø3.5mmminijack(Stereo)
Speakers 1W×2(Stereospeakers)
Maximum Screen Size 476.6mm W × 268.1mm H / 18.8" W × 10.6" H
Power Source 100-240VAC, 50/60Hz, 1.5A
Power Consumption* 16W typical, Standby mode: 0.5W maximum
Dimensions / Net Weight
504.5×362.5-492.5×210.0mm/19.9×14.3-19.4×8.3"(W×H×D)
4.7kg / 10.36lbs
Angle
Tilt: Upward: 22° Downward: 5°
Swivel: Left/Right: 45° each
Rotation: Clockwise / Counterclockwise: 90° each
Environmental
Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
5 to 35°C / 41 to 95°F
10to80%(Nocondensation)
-20 to 60°C / -4 to 140°F
10to70%(Nocondensation)
Approvals CE, TÜV-Bauart, VCCI, EAC
ENGLISH
APPENDIX 35
SPECIFICATIONS : G-MASTER G2230HS
* Audio equipment is not connected.
NOTE
Size Category 22"
LCD
Panel
Panel technology
TN
Size Diagonal:21.5"(54.7cm)
Pixel pitch 0.248mm H × 0.248mm V
Brightness 250cd/m2(Typical)
Contrast ratio 1000:1(Typical),Adv.ContrastFunctionAvailable
Viewable angle
Right / Left : 85
°
each, Up / Down : 80
°
each(Typical)
Response time 0.8ms(Min,GraytoGray)
Display Colors Approx. 16.7M
Sync Frequency Analog: Horizontal: 30.0-83.0kHz, Vertical: 55-75Hz
Digital: Horizontal: 30.0-85.0kHz, Vertical: 55-75Hz
Native Resolution 1920 × 1080, 2.1 MegaPixels
Support max. resolution
VGA: 1920 × 1080 60Hz
HDMI: 1920 × 1080 75Hz
DisplayPort: 1920 × 1080 75Hz
Input Connector VGA, HDMI, DisplayPort
Plug & Play VESA DDC2BTM
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal Analog:0.7Vp-p(Standard),75Ω, Positive
Digital: HDMI, DisplayPort
Input Audio Connector ø3.5mmminijack(Stereo)
Input Audio Signal 1.0Vrms maximum
Headphone Connector ø3.5mmminijack(Stereo)
Speakers 1W×2(Stereospeakers)
Maximum Screen Size 476.6mm W × 268.1mm H / 18.8" W × 10.6" H
Power Source 100-240VAC, 50/60Hz, 1.5A
Power Consumption* 16W typical, Standby mode: 0.5W maximum
Dimensions / Net Weight
504.5×383.0×187.0mm/19.9×15.1×7.4"(W×H×D)
3.1kg / 6.83lbs
Tilt Angle Upward: 22° Downward: 5°
Environmental
Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
5 to 35°C / 41 to 95°F
10to80%(Nocondensation)
-20 to 60°C / -4 to 140°F
10to70%(Nocondensation)
Approvals CE, TÜV-Bauart, VCCI, EAC
ENGLISH
36 APPENDIX
DIMENSIONS : G-MASTER GB2230HS
478.0mm/18.8”
269.5mm/10.6”
308.5mm/12.1”
50.5mm/2.0”
207.0mm/8.2”
187.0mm/7.4”
383.0mm/15.1”
504.5mm/19.9”
():Maximumadjustmentrange
DIMENSIONS : G-MASTER G2230HS
50.5mm/2.0”
362.5mm/14.3”(492.5mm/19.4”)
380.0mm/15.0”
240.0mm”/9.4”
210.0mm/8.3”
504.5mm/19.9”
478.0mm/18.8”
308.5mm/12.1”
269.5mm/10.6”
529.5mm/20.8”(594.0mm/23.4”)
ENGLISH
APPENDIX 37
M265A21
COMPLIANT TIMING
*1 HDMI/DisplayPort input only.
*2 Analog input only.
NOTE
Video Mode Horizontal
Frequency Vertical
Frequency Dot Clock
640 × 480 31.469kHz 59.940Hz 25.175MHz
800 × 600 37.879kHz 60.317Hz 40.000MHz
1024 × 768 48.363kHz 60.004Hz 65.000MHz
1280 × 1024 63.981kHz 60.020Hz 108.000MHz
1440 × 900 55.935kHz 59.887Hz 106.500MHz
1680 × 1050 65.290kHz 60.000Hz 146.250MHz
1920 × 1080 67.500kHz 60.000Hz 148.000MHz
83.890kHz 74.970Hz 174.500MHz *1
640 × 350 31.469kHz 70.087Hz 25.175MHz *2
720 × 400 31.469kHz 70.087Hz 28.322MHz *2