iiyama LE4340S-B3 User Manual
Displayed below is the user manual for LE4340S-B3 by iiyama which is a product in the Signage Displays category. This manual has pages.
Related Manuals
ENGLISH
Thank you very much for choosing the iiyama
LCD display.
We recommend that you take a few minutes
to read this comprehensive manual carefully
before installing and switching on the display.
Please keep this manual in a safe place for
your future reference.
USER MANUAL
ENGLISH
ENGLISH
Wereservetherighttochangespecicationswithoutnotice.
All trademarks used in this user manual are the property of their respective owners.
Eprel registration number LE3240S-B2 : 359269, LE4340S-B1 : 356909, LE4340S-B1 A : 742874
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the
address: http://www.iiyama.com
YoucanaccesstheWebpageofdierentcountriesfromthere.
CE MARKING DECLARATION OF CONFORMITY
This LCD display complies with the requirements of the EC/EU Directive 2014/30/EU “EMC
Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU
“RoHS Directive”.
Warning
This is a class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PL3240/PL4340
CE MARKING DECLARATION OF CONFORMITY
This LCD display complies with the requirements of the EC/EU Directive 2014/30/EU “EMC
Directive”, 2014/35/EU “Low Voltage Directive” and 2011/65/EU “RoHS Directive”.
Warning
This is a class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PL4840/PL5540
ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................ 1
SAFETY PRECAUTIONS................................................................1
SPECIAL NOTES ON LCD DISPLAYS ...........................................3
CUSTOMER SERVICE ...................................................................5
CLEANING ......................................................................................5
BEFORE YOU OPERATE THE DISPLAY ............................................6
FEATURES......................................................................................6
CHECKING THE CONTENTS OF THE PACKAGE ........................6
UNPACKING : ProLite LE5540S .....................................................7
CONTROLS AND CONNECTORS : DISPLAY ................................ 8
INSTALLATION .............................................................................10
CONTROLS AND CONNECTORS : REMOTE CONTROL ...........11
PREPARING THE REMOTE CONTROL.......................................12
BASIC OPERATION ...................................................................... 14
CONNECTING YOUR THE DISPLAY ...........................................17
COMPUTER SETTING .................................................................19
OPERATING THE DISPLAY ...............................................................20
ADJUSTMENT MENU CONTENTS ..............................................22
STANDBY FEATURE ....................................................................34
TROUBLE SHOOTING ......................................................................35
RECYCLING INFORMATION .............................................................36
APPENDIX ........................................................................................37
SPECIFICATIONS : ProLite LE3240S-B1 .....................................37
SPECIFICATIONS : ProLite LE3240S-B2 .....................................38
SPECIFICATIONS : ProLite LE4340S-B1 / ProLite LE4340S-B1 A ..
39
SPECIFICATIONS : ProLite LE4840S ..........................................40
SPECIFICATIONS : ProLite LE5540S ..........................................41
DIMENSIONS : ProLite LE3240S-B1 ............................................ 42
DIMENSIONS : ProLite LE3240S-B2 ............................................ 42
DIMENSIONS : ProLite LE4340S .................................................43
DIMENSIONS : ProLite LE4840S .................................................43
DIMENSIONS : ProLite LE5540S .................................................44
COMPLIANT TIMING ....................................................................45
ENGLISH
FOR YOUR SAFETY 1
FOR YOUR SAFETY
WARNING
STOP OPERATING THE DISPLAY WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the display
and contact your dealer or iiyama service center immediately. Further use may be dangerous and
cancausereorelectricshock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the display. Removing the cabinet may expose you to the danger of
reorelectricshock.
DO NOT PUT ANY OBJECT INTO THE DISPLAY
Do not put any solid objects or liquids such as water into the display. In case of an accident, unplug
your display immediately and contact your dealer or iiyama service center. Using the display with
anyobjectinsidemaycausere,electricshockordamage.
INSTALL THE DISPLAY ON A FLAT, STABLE SURFACE
The display may cause an injury if it falls or is dropped.
DO NOT USE THE DISPLAY NEAR WATER
Donotusewherewatermaybesplashedorspiltontothedisplayasitmaycausereorelectric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Besuretooperatethedisplayonlywiththespeciedpowersupply.Useofanincorrectvoltagewill
causemalfunctionandmaycausereorelectricshock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the display or any other heavy
objectsonthecables.Ifdamaged,thecablesmaycausereorelectricshock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the display during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS
ENGLISH
2 FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the display where sudden temperature changes may occur, or in humid, dusty or
smokyareasasitmaycausere,electricshockordamage.Youshouldalsoavoidareaswherethe
sun shines directly on the display.
DO NOT PLACE THE DISPLAY IN A HAZARDOUS POSITION
The display may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the display, and that all cables are routed such that children may not pull
the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the display from overheating. Covering the slots may cause
re.Toallowadequateaircirculation,placethedisplayatleast10cm(or4inches)fromanywalls.
Operating the display on its back, side, upside down or on a carpet or any other soft material may
also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE DISPLAY
Whenyoumovethedisplay,turnothepowerswitch, unplugthedisplayandbesurethesignal
cableisdisconnected.Ifyoudonotdisconnectthem,itmaycausereorelectricshock.
UNPLUG THE DISPLAY
If the display is not in use for a long period of time it is recommended that it is left unplugged to
avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable
itselfasthismaycausereorelectricshock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE DISPLAY ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the display, otherwise, you may
damage your computer.
REMARK FOR 24/7 USAGE
Thisproductisnotspecicallydesignedfor24/7usage.(Recommendedoperatingtimeis12hours/
Day.)
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the display against a bright background or in a dark room.
Foroptimalviewingcomfort,thedisplayshouldbejustbeloweyeleveland40-60cm(16-24inches)
away from your eyes. When using the display over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
OTHERS
ENGLISH
FOR YOUR SAFETY 3
The following symptoms are normal with LCD displays and do not indicate a problem.
NOTE -WhenyourstturnontheLCDdisplay,thepicturemaynottinthedisplayarea
because of the type of computer that is used. In this case, adjust the picture position to
the correct position.
-Youmayndslightlyunevenbrightnessonthescreendependingonthedesktop
pattern you use.
- Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screenisrecoveredslowlybychangingtheimageorturningothePowerSwitchfor
hours.
SPECIAL NOTES ON LCD DISPLAYS
This LCD cannot be used outdoors.
This LCD cannot be used with the screen facing upwards.
If you use a cable longer than the supplied one, the picture quality is not guaranteed.
ENGLISH
4 FOR YOUR SAFETY
USAGE CONFIRMATION
This product is designed for optimum usage at 12hours per day.
The display is compatible for usage in Landscape applications.
IMAGE PERSISTENCE / IMAGE STICKING
Please be aware that all LCD screens can experience Image Persistence or Image Sticking. This
occurs when a residual image remains visible on a screen when static images are displayed for long
periods of time. LCD Image Persistence is not permanent but constant images being displayed for a
long period of time should be avoided.
To counteract Image Persistence, turn off the display for as long as the previous image was
displayed, so if an image was on the display for 1 hour and there is evidence of a residual or “ghost”
image,youshouldturnothedisplayfor1hourinordertocleartheresidualimage.
For all LFD products, iiyama recommends displaying moving images and utilising a moving screen
saveratregularintervalswheneverthescreenisidle.Youcouldalsoturnothedisplaywhennotin
use to assist the prevention.
OtherwaystoreducetheriskofImagePersistencewillbetoutilisetheFAN-onfunction(if
available),LowBacklightandLowBrightnesssettings.
FOR EXTENDED USE AS A PUBLIC DISPLAY
Image Sticking on LCD Panel
When a static image is displayed for hours, an electric charge trace remains near the electrode
insidetheLCDproducinga“ghost”image.(ImagePersistence).
Image Persistence is not a permanent feature.
Recommendations
To prevent Image Sticking and promote longer life expectancy of display, we recommend the
following:
1. Avoid static images displayed for long periods – change static images on continuous loop.
2.Turnodisplaywhennotinuse,eitherbyremotecontroloruseStandbyorSchedulefunctions.
3. Check the Display Menu Settings for "Pixel Shift" etc. and activate it when available. This will
reducetheImageStickingEect.
4.Whendisplayisinstalledinhighambienttemperatureenvironment(s)orinanenclosedposition,
utilise the Cooling Fan, Screen Saver and Low Brightness functions.
5. Suitable ventilation for any display is an expectation of any installation – climate control systems
may need to be employed.
6. We strongly recommend utilisation of active cooling with fans for long operation times or high
ambient temperature environments.
ENGLISH
FOR YOUR SAFETY 5
NOTE
If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
WARNING
If you drop any materials or liquids such as water into the
display
when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.
CAUTION
Forsafetyreasons, turnothepowerswitch andunplugthedisplay beforeyou
clean it.
NOTE
To protect the LCD panel, do not scratch or rub the screen with a hard object.
Never use any of the following strong solvents. These will damage the cabinet and
the LCD screen.
Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
Thinner Benzine Abrasive cleaner
Spray-type cleaner Wax Acid or Alkaline solvent
CABINET Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
LCD
SCREEN
Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
CUSTOMER SERVICE
CLEANING
ENGLISH
6 BEFORE YOU OPERATE THE DISPLAY
The following accessories are included in your package. Check to see if they are enclosed with
the display. If anything is missing or damaged, please contact your local iiyama dealer or regional
iiyamaoce.
* The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used. However, all guarantees and warranties are void for any
problems or damage caused by a power cable not supplied by iiyama.
An approved power cable greater or equal to H05VVF, 3G, 0.75mm2 must be used.
Power Cable*
VGA Cable DVI-D Cable
RS-232C Cable Remote Control Battery(2pcs)
POP Label iiyama Logo Sticker EU Energy Label
Safety Guide Quick Start Guide
BEFORE YOU OPERATE THE DISPLAY
CHECKING THE CONTENTS OF THE PACKAGE
CAUTION
FEATURES
Supports Resolutions up to 1920 × 1080
High Contrast 1400:1 (Typical) / Brightness 350cd/m
2
(Typical) : ProLite LE3240S-B1
High Contrast 3000:1 (Typical) / Brightness 350cd/m
2
(Typical) : ProLite LE4340S
High Contrast 4000:1 (Typical) / Brightness 350cd/m2 (Typical) : ProLite
LE4840S / ProLite LE3240S-B2
High Contrast 1200:1 (Typical) / Brightness 350cd/m
2
(Typical) : ProLite LE5540S
Digital Character Smoothing
Automatic Set-up
Stereo Speakers
2 × 10W Stereo Speakers
Plug & Play VESA DDC2B Compliant
Windows® XP/Vista/7/8/8.1/10 Compliant
Standby Feature (VESA DPMS Compliant)
VESA Mounting Standard (100mm×100mm, 200mm×200mm) Compliant :
ProLite LE3240S
VESA Mounting Standard (200mm×200mm, 400mm×400mm) Compliant :
ProLite LE4340S / ProLite LE4840S
VESA Mounting Standard (400mm×200mm, 400mm×400mm) Compliant :
ProLite LE5540S
ENGLISH
BEFORE YOU OPERATE THE DISPLAY 7
UNPACKING : ProLite LE5540S
Before unpacking your display, prepare a stable, level, and clean surface near a wall outlet.
Set the LCD display box in an upright position and open from the top of the box before removing
the top cushions.
Remove the carton holders.
Remove the top cushion and take
the accessories box and the display out.
CAUTION
Moving the display requires at least two people. If not, it may drop
and could result in a serious injury.
When moving/shipping the display, please hold by the carton holders.
Pinch and Pull the Knob.
ENGLISH
8 BEFORE YOU OPERATE THE DISPLAY
CONTROLS AND CONNECTORS : DISPLAY
<Back Controller>
<Front>
Power Button
MUTE Mute Button
INPUT Enter / Input
Select Button
+ + Button
- - Button
Up Button
Down Button
MENU Menu Button
Power Indicator
Green
Lighting : Normal Operation
Flash : Standby
Mode
(
ECO Mode
:
Normal
)
* If there is no input signal from the computer and passes
for 10 minutes.
Orange
IfturnothePowerButtonontheRemoteControlandthe
BackController.StandbyMode(ECOMode:Normal)
Red
IfturnothePowerButtonontheRemoteControland
theBackController.StandbyMode(ECOMode:Low
powerstandby)
O PowerO
Remote Sensor Remote Sensor
MUTE INPUT MENU
<Remote sensor and power indicator - location>
1. Pull down the lens to improve remote control performance and ensure good visibility of the power
status diode.
2. Push up the lens before mounting the display for video wall application.
3. Pull/Push the lens until hearing the click sound.
Push right to hide the lens Push left to extend the lens
ENGLISH
BEFORE YOU OPERATE THE DISPLAY 9
<Back>
AC IN AC-INLET ACConnector( : Alternatingcurrent)(AC-IN)
AC SWITCH
(ON)/ (OFF) MAIN POWER Main Power Switch
PC AUDIO IN Mini Jack Audio Connector
HDMI IN HDMI HDMI Connector
DVI IN DVI-D DVI-D Connector
VGA IN VGA VGA Connector
COMPONENT
VIDEO
(VIDEOIN)
RCA G/B/R Component Video Connector
AUDIO IN RCA L/R Audio Connector
AUDIO OUT RCA L/R Headphone Connector
IR OUT IR IR Connector
IR IN IR IR Connector
LAN RJ45 RJ45 Connector
RS232C OUT Mini Jack RS232C Connector
RS232C IN Mini Jack RS232C Connector
USB USB(5V,500mA) USB Connector
Keyhole for
Security Lock Keyhole for Security Lock
SPEAKERS Speakers
YPbPr
LRL R INOUTRJ45IN USB
OUT
ENGLISH
10 BEFORE YOU OPERATE THE DISPLAY
INSTALLATION
CAUTION
Follow the manual instructions for the type of mount you have selected. Refer all servicing to
qualiedservicepersonnel.
Moving the display requires at least two people.
Before installing, please make sure the wall is strong enough to hold the necessary weight of the
display and the mount.
[WALL MOUNTING]
When using the wall mounting, consideration of thickness of the mounting stage needs to be taken.
Tighten the M4/M6*
Screws(4pcs)
with washer which “L” length is 10mm to fasten the display.
Using a screw longer than this may cause electric shock or damage because it may contact with the
electrical parts inside the display.
CAUTION
L
Mounting Stage Screw
Chassis
* M4 Screw : ProLite LE3240S
M6 Screw : ProLite LE4340S / ProLite LE4840S / ProLite LE5540S
[ROTATING THE DISPLAY]
A
A
Not Available
It is designed to be compatible in landscape mode.
A
A
Landscape
Available
Power indicator
ENGLISH
BEFORE YOU OPERATE THE DISPLAY 11
CONTROLS AND CONNECTORS : REMOTE CONTROL
Turns the display ON and OFF.
[PLAY]
Controlplaybackofmediales.
: Play
: Stop
:
Pause
: Quick-Return
: Fast-Forward
INPUT
Selects the source.
Press or button to select from
USB, Network, HDMI, DVI, YPbPr,
AV or VGA. Press [OK] button to
conrmandexit.
TV
LIST
CH - / +
Not available on this model.
HOME Opens the display’s on-screen
menu systems.
Navigates through submenus and
settings.
: Up Button
: Down Button
: Left Button
:
Right Button
OK
Conrmsyourselectionorsavechanges.
ADJUST
Selects the direct menu.
PC mode : Sound style, Audio out,
Picture format, Picture shift
Video mode : Picture Style, Sound
style, Audio out, Picture format,
Picture shift
BACK Returns to a previous menu or
closes the OSD Menu.
VOLUME - / +
VOLUME-: Decreases the sound
volume.
VOLUME+: Increases the sound
volume.
MUTE Turnsonorothemutefunction
when the Menu is not displayed.
COLOR
Select tasks or options.
NUMERIC Enter text for network setting.
FORMAT Change picture format.
INFO Provides source and resolution
information.
OPTIONS Access currently available options,
picture and sound menus.
ENGLISH
12 BEFORE YOU OPERATE THE DISPLAY
To use the remote control, insert the two dry batteries.
PREPARING THE REMOTE CONTROL
CAUTION
Slide back and remove the battery cover in the direction of the arrow.
AlignandinserttwoAAAbatteriesaccordingtotheirplusandminusports(asindicatedinthe
remotecontrol).
Replace the battery cover in the direction of the arrow and snap it back into place.
Battery x 2
DonotuseanyotherbatteriesotherthanthosespeciedinthismanualfortheRemoteControl.
Do not insert old and new batteries together in the Remote Control.
Make sure that the terminals match the "+" and "-" indications in the battery compartment.
Remove the dead batteries immediately to prevent them from liquid leaking into the battery
compartment.
Burstbatteriesortheelectrolytefromthesebatteriesmaycausestains,reorinjury.
ENGLISH
BEFORE YOU OPERATE THE DISPLAY 13
NOTE Refer to the above instructions when taking out the batteries.
Replace with new batteries when the Remote Control does not work close to the monitor.
Use AAA dry batteries. Risk of explosion if battery is replaced by an incorrect type.
Operate the Remote Control by pointing it toward the Remote Sensor on the monitor.
Other manufacturers remote control will not work with this monitor. Use the provided
Remote Control ONLY.
Usedbatteriesneededtofollowthecityruletobediscarded.(suggestion:todisposeof
usedbatteriespleasefollowcorrectpolicyasperyourcouncilregulations)
Batteriesshallnotbeexposedtoexcessiveheatsuchassunshine,reorthelike.
If you do not intend to use the remote control for a long period, remove the batteries.
ENGLISH
14 BEFORE YOU OPERATE THE DISPLAY
BASIC OPERATION
Turning the display ON
The display is turned On and the Power Indicator turns to
Green when you press the POWER button on the display or
theRemoteControl.ThedisplayisturnedOandthePower
Indicator turns to Orange when you press the POWER button
on the display or the Remote Control. Press again to turn On
the display.
NOTE
Even when using the standby mode or turning OFF the
Power Switch, the display will consume a small amount of
electricity. Disconnect the Power Cable from the power supply
whenever the display is not in use or during the night, to avoid
unnecessary power consumption.
[Remote Control]
Display the adjustment menu page
The menu page appears on the screen when you press the
MENU button on the display or the HOME button on the
Remote Control.
The menu page disappears when you press the
BACK
button on the Remote Control again.
[Display]
[Remote Control]
[Display]
MUTE INPUT MENU
MUTE INPUT MENU
ENGLISH
BEFORE YOU OPERATE THE DISPLAY 15
Move the cursor horizontally
Select menu or setting, or perform the adjustment by pressing
the + / - button on the display or the / button on the
remote control while the menu page is displayed on the
screen.
Move the cursor vertically
Select adjustment by pressing the / button on the display
or the / button on the remote control while the menu page
is displayed on the screen.
[Remote Control]
[Display]
[Remote Control]
MUTE INPUT MENU
[Display]
MUTE INPUT MENU
ENGLISH
16 BEFORE YOU OPERATE THE DISPLAY
Adjust the volume of sound
Press the + / - button on the display or the remote control
to adjust the volume of sound when the menu page is not
displayed on the screen.
Switch the input signal
This is activated when you successively press the INPUT
button on the display or the Remote Control.
[Remote Control]
[Display]
[Remote Control]
[Display]
MUTE INPUT MENU
MUTE INPUT MENU
ENGLISH
BEFORE YOU OPERATE THE DISPLAY 17
CONNECTING YOUR THE DISPLAY
Ensurethatboththecomputerandthedisplayareswitchedo.
Connect the computer to the display with the signal cable.
Connect the computer to the display with the RS-232C Cable.
ConnectthePowerCabletothedisplayrstandthentothepowersource.
Turnonyourdisplay(MainPowerSwitchandPowerSwitch)andcomputer.
Makesurethatthebuildinginstallationhasacircuitbreakerof120/240V,20A(maximum).
The signal cables used for connecting the computer and display may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the display and the computer. The cable supplied with the display is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regionaliiyamaoce.
MakesureyoutightenthengerscrewsateachendoftheSignalCable.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.
[Example of Connection]
<Back>
NOTE
Computer
AV Equipment etc.
VGA Cable (Accessory)
DVI-D Cable (Accessory)
HDMI Cable (Not Included)
Power Cable (Accessory)
RS-232C Cable
(Accessory)
Audio Cable
(Not Included)
ENGLISH
18 BEFORE YOU OPERATE THE DISPLAY
[ Connection example with the peripheral device ]
CAUTION
Turn off the power switch and unplug
the display and peripherals before
connection to avoid electric shock or
damage.
NOTE
Refer to the user manual of
peripherals at the same time.
Ensure you have the necessary
cables as required.
LRLR INOUTRJ45IN USB
OUT
YPbPr
Red
Blue
Green
Red
White
Red
White
PC
[RJ-45]
[RJ-45] ROUTER
INTERNET
Monitor
[ To setup the network ]
1. Switch on the router and switch on its DHCP setting.
2. Connect the router to this display with an Ethernet cable.
3. Press HOME button on the remote control, then select Setup.
4. Select "Connect to network", then press OK button.
5. Follow the on-screen instructions to install the network.
6.Waitforthisdisplaytondthenetworkconnection.
7. If you are prompted, agree to the “End User Licence Agreement”.
Connecting with a shielded CAT-5 Ethernet cable to comply with the EMC directive.
NOTE
ENGLISH
BEFORE YOU OPERATE THE DISPLAY 19
Procedure for turning ON the Power Switch
TurnONthedisplayrst,andthenthecomputer.
Signal Timing
Change to the desired signal timing listed on page 45: COMPLIANT TIMING.
Windows XP/Vista/7/8/8.1/10 Plug & Play
The iiyama LCD display complies with DDC2B of VESA standard. The Plug & Play function runs
on Windows XP/Vista/7/8/8.1/10 by connecting the display to DDC2B compliant computer with
the Signal Cable supplied.
For installation on Windows XP: The display Information File for iiyama displays may be
necessary for your computer and obtained via the Internet, using the address:
http://www.iiyama.com
Display Drivers are not required in most cases for Macintosh or Unix operating
systems.Forfurtherinformation,pleasecontactyourcomputerdealerrstforadvice.
COMPUTER SETTING
NOTE
ENGLISH
20 OPERATING THE DISPLAY
OPERATING THE DISPLAY
To create the best picture, your iiyama LCD display has been preset at the factory with the COMPLIANT
TIMING shown on page 45. You are also able to adjust the picture by following the button operation
shown below.
Press the HOME button on the remote control or the MENU button on the Display
to start the On Screen Display feature. There are additional Menu items which can
be switched by using the / buttons on the remote control or the / buttons on
the display.
Select the Menu item of the adjustment you want to make. Press the OK button on
the remote control or the INPUT button on the display and enter the menu page.
Then, use the / buttons on the remote control or the / buttons on the display
to highlight the desired adjustment item.
Press the OK button on the remote control or the INPUT button on the display again.
Use the / buttons on the remote control or the + / - buttons on the display to make
the appropriate adjustment or setting.
Press the BACK button on the remote control or the MENU button on the display
to leave the menu, and the settings you just made would be automatically saved.
The BACK button on the remote control or the INPUT button on the display can be used to
return previous menu item.
Any changes are automatically saved in the memory when the On Screen Display
disappears.
TurningothepowershouldbeavoidedwhileusingtheMenu.
NOTE
For example, to correct for sharpness, select Menu item of "Picture". Press the OK button on the
remote control or the INPUT button on the display. Then, select "Sharpness" by using the /
buttons on the remote control or the / buttons on the display.
Use the / buttons on the remote control or the + / - buttons on the display to change the
sharpness settings. The sharpness of the overall display should be changing accordingly while
you are doing this.
Press the BACK button on the remote control or the MENU button on the display lastly, it
ends, all changes are saved in the memory.
Reset
Backlight
Contrast
Brightness
Hue
Colour
Sharpness
Advanced
Foramat and edges
Picture
Sound
General settings
Network settings
Picture Mode
Vivid
Natural
Standard
Movie
Photo
Energy saving
Custom
Picture Mode
Reset
Backlight
Contrast
Brightness
Hue
Colour
Advanced
Foramat and edges
Sound
General settings
Network settings
Picture
Sharpness
50
ENGLISH
OPERATING THE DISPLAY 21
Direct
Press the ADJUST button when Menu is not displayed.
Direct menu below appears.
PC input and Video input (HDMI, DVI, YPbPr, AV, VGA)
Sound Mode:
Accesspredenedsoundsettings.
Audio out:
Adjust audio output volume.
Picture format:
Change the picture format.
Picture shift:
Move the position of the picture.
Video input only (HDMI(Video), YPbPr, AV)
Picture Mode:
Selectapredenedpicturesettings.
* Available for Remote Control only.
ENGLISH
22 OPERATING THE DISPLAY
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option Button to Press
Too dark
Too bright
Brightness*1
Contrast Too dull
Too intense
Picture Mode*2
Custom
Vivid
Movie
Standard
Displays a picture on a screen set by Image Settings
adjustments.
For displaying outdoor scenery images.
For movie and video environment.
For general windows environment and the display
default setting.
Sharpness*2Too soft
Too sharp
Colour Too week
Too strong
Backlight Brightness of back light is reduced.
Picture
Hue
O
LOW
MIDDLE
HIGH
Purplish
Greenish
Noise Reduction isturnedo.
Electronicimagenoisecausedbydierent
media players is reduced.
Electronicimagenoisecausedbydierent
media players is reduced more than Low.
Electronicimagenoisecausedbydierent
media players is reduced more than Mid.
*1
Adjust the Brightness when you are using the display in a dark room and feel the screen is too bright.
*2 OnlyHDMI(Video),YPbPrandAVinput.
Natural
Photo For photo environment.
Reset Picture setting will be restored to factory-preset data.
Advanced Noise
reduction*2
Direct
Energy saving
Reset
Backlight
Contrast
Brightness
Hue
Colour
Sharpness
Advanced
Foramat and edges
Picture
Sound
General settings
Network settings
Picture Mode
Vivid
Natural
Standard
Movie
Photo
Energy saving
Custom
For displaying natural images.
To display the image while reducing power.
Yes
No Return to Menu.
ENGLISH
OPERATING THE DISPLAY 23
Too weak
Too strong
Custom
R-WP(Red)
G-W(Green)
B-WP(Blue)
Normal
Warm
Cool
Color temp.
Adjustment Item Problem / Option Button to Press
Picture
Gamma You can set the Gamma.
-4 - 4
Greenish white
Reddish white
Bluish white
Advanced
Advanced
sharpness*2Enhance the picture edge and lines.
Dynamic
contrast*2
Dynamically enhance the details areas of
the picture.
Dynamic
backlight*2
Colour
enhancement*
2
O
LOW
MIDDLE
HIGH
Dynamic contrast isturnedo.
Dynamically enhance the details areas of
the picture more than LOW.
Dynamically enhance the details areas of
the picture more than MIDDLE.
Optimize dynamic power consumption
and picture contrast.
O
Standard
Best Power
Best Picture
Dynamic backlight isturnedo.
Optimize dynamic power consumption.
Optimize dynamic picture contrast.
Colour enhancement the vividness and
details of colours.
O
LOW
MIDDLE
HIGH
Colour enhancement isturnedo.
Colour enhancement the vividness and
details of colours more than LOW.
Colour enhancement the vividness and
details of colours more than MIDDLE.
Reset
Backlight
Contrast
Brightness
Hue
Colour
Sharpness
Advanced
Foramat and edges
Picture
Sound
General settings
Network settings
Picture Mode
Vivid
Natural
Standard
Movie
Photo
Energy saving
Custom
O
On
Advanced sharpness isturnedo.
*2 OnlyHDMI(Video),YPbPrandAVinput.
ENGLISH
24 OPERATING THE DISPLAY
Adjustment Item Problem / Option Button to Press
Picture
Format and edges
Picture format
Auto zoom Enlarges the image on the screen to
the original screen ratio.
Movie
expand 16:9
Scale 4:3 format to 16:9.
Not recommended for HD or PC.
Wide screen
Shows widescreen format content
stretched.
Not recommended for HD or PC.
Unscaled Display all pictures in the original
resolution.
4:3 Display all pictures in 4:3 aspect ratio.
Screen
edges*2
Change the picture size.
0( )-10( )
Direct
Reset
Backlight
Contrast
Brightness
Hue
Colour
Sharpness
Advanced
Foramat and edges
Picture
Sound
General settings
Network settings
Picture Mode
Vivid
Natural
Standard
Movie
Photo
Energy saving
Custom
*2 OnlyHDMI(Video),YPbPrandAVinput.
Picture shift Move the position of the picture.
ENGLISH
OPERATING THE DISPLAY 25
Adjustment Item Problem / Option Button to Press
Bass Too weak
Too strong
Speaker
Clear sound Enable the volume
Sound
Sound Mode
News
Original
Sound quality suitable for the news.
Sound quality suitable for the movie.
Audio out
Auto volume
leveling
Custom Recalls customized settings.
Treble Too weak
Too strong
Adjust audio output volume.
Direct
Movie
Sound quality suitable for the music.
Music
Sound quality suitable for the game.
Game
Reset
Sound setting will be restored to factory-preset data.
Direct
Too soft
Too loud
Advanced
Enable the reduction of sudden
volume changes.
O Auto volume leveling isturnedo.
On
O Clear sound isturnedo.
On
Reset
Bass
Treble
Audio out
Advanced
Picture
Sound
General settings
Network settings
Sound Mode
Original
Movie
Music
Game
News
Custom
Set the original sound quality.
O
On
TurnOtheinternalspeaker.
Turn On the internal speaker.
Yes
No Return to Menu.
ENGLISH
26 OPERATING THE DISPLAY
Adjustment Item Problem / Option Button to Press
General settings
Clock
Menu Language
English
Deutsch
English
German
Français French
Russian
Polski Polish
SpanishEspañol Česky Czech
Italian Italiano
Dutch Nederlands
Monitor id Set ID to the
display
.
1 - 255
Auto Search Automatically detects available input sources.
Control over LAN is not supported.
Normal Control over LAN is supported.
Low power standby
ECO Mode
Adjust the current date and time for the internal clock.
Daylightsaving(Daylightsavingtime/Standardtime)/Date/Time
You must set this item when using "Scheduling".
NOTE
Scheduling
Source
Select default input source to use when the
display is automatically turned on next time.
USB/HDMI/DVI/YPbPr/AV/VGA
On Time
OTime
Set the time for the display to turn on and
turno.
Repeat
modes
Sets a recurring schedule.
No Repeat / Every Sunday / Every Monday
/ Every Tuesday / Every Wednesday / Every
Thursday / Every Friday / Every Saturday
Sleep timer
Switchothisdisplayafteraspeciedtime.
0 - 180 mins
Autoswitcho
Setthetimeforthisdisplaytobeswitchedoafteraperiodofnoactivity.
0 - 240 mins
If the button operation is performed within the set time, the
timecountoftheAutoSwitchOwillbereset.Thedisplay
willbeturnedowhenthesettimehaselapsed.
On
O Auto Searchisturnedo.
Monitor id
ECO Mode
Auto Search
Clock
Scheduling
Sleep timer
Auto switch off
Pixel shift
Control settings
Picture
Sound
General settings
Network settings
Menu Language
Français
Italiano
Español
Deutsch
Nederlands
Polski
English
Русский
Česky
Opening logo
Auto adjust
Schedule1
Schedule2
Schedule3
Status On
O Scheduleisturnedo.
Schedule is turned on.
Playlist
setting
Settheletobestartedwhenthepoweris
turned on.
Japanese
NOTE
ENGLISH
OPERATING THE DISPLAY 27
*1 Only VGA input.
*2OnlyHDMI(Video),YPbPrandAVinput.
Adjustment Item Problem / Option Button to Press
General settings
Control settings
Local KB lock
Unlock
Lock all
Lock but
volume
Lock but
power
Enable the button function.
Choose to enable or disable the back controller
function of this display.
Lock all the button function.
Disable all the button function except
the VOL+ and VOL- button.
Disable all the button function except
the power button.
RC lock
Unlock
Lock all
Lock but
volume
Lock but
power
Enable the button function.
Choose to enable or disable the button function of the
remote control.
Lock all the button function.
Disable all the button function except
the VOL+ and VOL- button.
Disable all the button function except
the power button.
NOTE To disable the lock function from "Local KB lock" or "RC lock" item, press HOME
button and 1998 on the remote control.
Factory settings Factory-preset data is restored.
ECO Mode
Auto Search
Clock
Scheduling
Sleep timer
Auto switch off
Pixel shift
Picture
Sound
General settings
Network settings
Monitor id
Factory settings
Control settings
Opening logo
Auto adjust
Pixel shift *2
On
O Pixelshiftisturnedo.
Move the screen image automatically to protect the
display from “burn-in” or “after-image” symptoms If
not operating even 30 seconds.
Opening Logo
iiyama Logo displayed when the display is turned on. On
O iiyama Logo does not display when the display is
turned on.
Auto adjust *1Adjust H. / V. Position, Clock and Phase automatically.
Start
Cancel Return to Menu.
Cancel
OK
Return to Menu.
ENGLISH
28 OPERATING THE DISPLAY
Adjustment Item Problem / Option Button to Press
Network Settings
View network settings View connected network status.
Assign {IP address}, {Netmask}, {Gateway}, {DNS1}, and {DNS2} for
this display.
NetworkConguration Select how this display should assign addresses to the network
resources.
DHCP & Auto IP / Static IP
Wake on lan *
ReceivemultimedialesfromSmartphonesorTablets
connected to your network.
StaticIPConguration
Digital Media Renderer
- DMR On
O Digital Media Renderer - DMRisturnedo.
Network Configuration
Static IP Configuration
Digital Media Render...
Wake on lan
Network name
Picture
Sound
General settings
Network settings
View network settings
Renamethisdisplayforeasyidentication.
Network name
On
O Wake on lanisturnedo.
Turn the display on remotely over LAN network.
* Wake on lan only available when ECO Mode is Low power standby.
ENGLISH
OPERATING THE DISPLAY 29
[Play Multimedia Files]
You can play videos, photos, and music on your display from:
· Your computer connected through your network.
· A USB device connected to this display.
Play les from computer
Toplaylesfromcomputer,youwillneed:
·Awirednetwork,connectedwithaUniversalPlugandPlay(uPnP)router.
· Optional: A LAN cable that connects your display to your network.
· A media server running on your computer.
·Appropriatesettingsonyourcomputerrewalltoallowyoutorunthemediaserver.
Set up media sharing
1.Installamediaserveronyourcomputertosharemediales.Thesearesomemediaservers:
•ForPC:WindowsMediaPlayer11(orhigher)orTVersity
• For Mac: Twonky
2. Switch on media sharing on your computer using the media server. For more information on
how to set up the media server, refer to the website of the media server.
Play les
1. Press SOURCE button.
2. Select [network], then press OK button.
3.Selectalefromthecontentbrowser,thenpressOKbuttontostartplaying.
4. Press the Play buttons on the remote control to control playing.
* •Selectthetopbartolterourlesbytype.
•Select[Sort]toarrangethelesbyalbumname,artist,orotherelds.
Play multimedia les from USB device
Thisdisplaycanplaymusic,movie,orphotolesfromyourUSBdevice.
1. Connect your USB device to the USB port on this display.
2. Press SOURCE button, select USB, then press OK button.
3.TheconnectedUSBdeviceisdetectedautomaticallyforallitsplayableleswhichwillbe
automatically sorted into 3 types: Music, Movie and Photo.
4. Press the BACK button to go up to the top layer in the screen. Press or button to
selecttheletype.PressOKbuttontoenteritsplaylist.
5.Selecttheleyouwant.PressOKbuttontostartplaying.
6. Follow the on-screen instruction to control the play option.
7.PressthePLAYbuttons( , , , , )tocontrolplaying.
ENGLISH
30 OPERATING THE DISPLAY
USB Standard:
2.0
Supported le system:
FAT32
Supported le format:
• Music: MP3, WMA, M4A, AAC, AC3
• Movie: AVI, MP4, MOV, MPG/MPEG
• Photo: JPEG, BMP, GIF
CAUTION
• The manufacturer is not responsible if the USB device is not supported, nor is it responsible for
damage to or loss of data in the device.
• Do not overload the USB port. If you connect a USB storage device that consumes more than
500mA power, make sure that it is connected to its own external power supply.
NOTE
Whenyou areplaying multimediales fromUSB deviceandturn thedisplay o.It willset input
source to the last real input source, such as HDMI, DVI, YPbPr, AV and VGA when you turn the
display on next time.
ENGLISH
OPERATING THE DISPLAY 31
[Play options]
Playing music les
1. Select Music in the top bar.
2. Select one music track, then press OK button.
3. Press the BACK button to display the play menu.
• Play All : To play all the tracks in a folder.
•Sort:Itclassiesthetrack.
• USB device : Music list of the USB device will be displayed.
• CH+ / CH- : To skip to the next or previous track.
• OK : To pause the track or resume.
• / : To skip backward or forward 10 seconds.
• / :Tosearchbackwardorforward.Pressrepeatedlytotogglebetweendierentspeeds.
• : To stop the music.
Music options
While playing music, press OPTIONS button.
• Repeat : To play a track or an album repeatedly.
• Play once : To play a track once.
• Media Server : Select the media server.
•ShueOn/ShueO:Enableordisablerandomplayoftracks.
Toviewinformationaboutasong(forexample,title,artistorduration),selectthesong,pressthe
BACK button to display the play menu and then press the INFO button. To hide the information,
press the INFO button again.
After pressing the OK button to select a song, the menu screen dissapears when the INFO
button is selected again. When press the BACK button to display the menu screen.
Play photo les from music le menu
Whileplayingamusicle,pressthe BACK button, go to the top of the screen, select a picture
and then select slide show.
USB deviceSortPlay All OptionsInfo
05:051. Music
Album
NOTE
ENGLISH
32 OPERATING THE DISPLAY
Playing movie les
1. Select Movie in the top bar.
2. Select a video, then press OK button.
• Play All : To play all the videos in a folder.
•Sort:Itclassiesthemovie.
• USB device : Movie list of the USB device will be displayed.
• CH+ / CH- : To skip to the next or previous video.
• OK : To pause the video or resume.
• / : To skip backward or forward 10 seconds.
• / :Tosearchbackwardorforward.Pressrepeatedlytotogglebetweendierentspeeds.
• : To stop the video.
Movie options
While playing video, press OPTIONS button.
<Option>
• Subtitles : Select the available subtitle settings.
•SubtitlesOn/O:Subtitledisplayon/o.
• On During Mute : Enable the subtitle display.
Subtitlecanbeswitchedon/obypressingtheMutebutton.
• Subtitle Language : Select the language for subtitles if available.
• Character Set : Select the correct character set for the subtitles.
• Audio Language : Select an audio language.
•Repeat:Toplaythevideolerepeatedly.
•Playonce:Toplaythevideoleonce.
• Media Server : Select the media server.
•ShueOn/ShueO:Enableordisablerandomplayofvideoles.
• Status : Displays video information.
<Picture and Sound>
• Picture Mode / Sound Mode / Audio out / Picture Format
<Eco Setting>
• ScreenO:Turnothescreentosavepowerconsumption.Todisplayagain,pressanybutton
on the remote control.
• AutoSwitchO
<Clock>
• Clock : Clockdisplayon/o.
• Sleep timer
USB devicePlay All OptionsInfo
Track
ENGLISH
OPERATING THE DISPLAY 33
Playing photo les
1. Select Photo in the top bar.
2. Select a photo thumbnail, then press OK button.
Start a slideshow
•PlayAll:Toplayallthephotoinafolder.(multiplephoto)
•Sort:Itclassiesthephoto.
• USB device : Photo list of the USB device will be displayed.
• / : To skip to the previous or next photo, then press OK button at the end.
• : To stop the slideshow.
Slideshow options
While you play a slideshow, press OPTIONS button.
<Option>
•ShueOn/ShueO:Enableordisablerandompictureintheslideshow.
• Repeat : To watch a slideshow.
• Play once : To watch once.
• Slideshow Time : Select the displaying time for each photo in the slideshow.
• Slideshow Transitions : Select the transition from one photo to the next.
• Media Server : Select the media server.
<Picture and Sound>
• Picture Mode / Sound Mode / Audio out / Picture Format
<Eco Setting>
• ScreenO:Turnothescreentosavepowerconsumption.Todisplayagain,pressanybutton
on the remote control.
• AutoSwitchO
Folder
ItliststhelesintheUSBdevice.ItispossibletoplaydirectlyfromtheUSB.
USB deviceSortPlay All OptionsInfo
Date
ENGLISH
34 OPERATING THE DISPLAY
Even when using the standby mode, the
display
consumeselectricity.TurnothePower
Switch whenever the
display
is not in use, during the night and weekends, to avoid
unnecessary power consumption.
NOTE
STANDBY FEATURE
Standby Mode
When the video signal from the computer is off, the
display
enters into Standby Mode which
reduces the power consumption to less than 0.5W*. The screen becomes dark. From Standby
Mode, the image reappears in several seconds when either the keyboard or the mouse are
touched again.
The standby feature of this product complies with power saving requirement of VESA DPMS.
When activated, it automatically reduces unnecessary power consumption of the
display
when your
computer is not in use.
To use the feature, the
display
needs to be connected to a VESA DPMS compliant computer. There
is a standby step the
display
takes as described below. The standby function, including any timer
settingsisconguredbytheoperatingsystem.Checkyouroperatingsystemmanualforinformation
onhowthiscanbecongured.
* USB peripherals and audio equipments are not connected.
00.5 W100%
POWER
CONSUMPTION
Green
Red
Power Indicator
NORMAL MODE
STANDBY MODE
*
ENGLISH
TROUBLE SHOOTING 35
The screen is not
synchronized.
The Signal Cable is properly connected.
Thesignaltimingofthecomputeriswithinthespecicationofthe
display
.
The picture does
not appear.
ThePowerCableisrmlyseatedinthesocket.
The Power Switch is turned ON.
The AC socket is live. Please check with another piece of equipment.
If the blank screen saver is in active mode, touch the keyboard or the mouse.
Increase the Contrast and/or Brightness.
The computer is ON.
The Signal Cable is properly connected.
Thesignaltimingofthecomputeriswithinthespecicationofthe
display
.
If the display is in standby mode, touch the keyboard or the mouse.
The screen
position is not in
the center.
Thesignaltimingofthecomputeriswithinthespecicationofthe
display
.
The screen is too
bright or too dark.
The screen is
shaking.
Thevideo outputlevel ofthe computeriswithin thespecication ofthe
display
.
Thepowervoltageiswithinthespecicationofthe
display
.
Thesignaltimingofthecomputeriswithinthespecicationofthe
display
.
No sound.
Theaudioequipment(computeretc.)isON.
The Audio Cable is properly connected.
The Volume is turned up.
The Mute is OFF.
Theaudiooutputleveloftheaudioequipmentiswithinthespecicationof
the
display
.
The sound is too
loud or too quiet.
Theaudiooutputleveloftheaudioequipmentiswithinthespecicationof
the
display
.
A strange noise is
heard.
The Audio Cable is properly connected.
TROUBLE SHOOTING
Problem Check
If the display fails to operate correctly, please follow the steps below for a possible solution.
1. Perform the adjustments described in OPERATING THE DISPLAY, depending on the problem you
have. If the
display
does not get a picture, skip to 2.
2.ConsultthefollowingitemsifyoucannotndanappropriateadjustmentiteminOPERATINGTHE
DISPLAY or if the problem persists.
3.
If you are experiencing a problem which is not described below or you cannot correct the problem,
discontinue using the
display
and contact your dealer or iiyama service center for further assistance.
ENGLISH
36 RECYCLING INFORMATION
For better environment protection please don't dispose your
display
.
Please visit our web site: www.iiyama.com for monitor recycling.
RECYCLING INFORMATION
ENGLISH
APPENDIX 37
APPENDIX
Designandspecicationsaresubjecttochangewithoutpriornotice.
SPECIFICATIONS : ProLite LE3240S-B1
* USB peripherals and audio equipment are not connected.
NOTE
Size Category 32"
LCD
Panel
Panel technology
IPS
Size Diagonal:31,5"(80cm)
Pixel pitch 0.36375mm H × 0.36375mm V
Brightness 350cd/m2(Typical)
Contrast ratio 1400:1(Typical)
Viewable angle Horizontal:178degrees,Vertical:178degrees(Typical)
Response time 8ms(Typical,GraytoGray)
Display Colors Approx.16.7M
Sync Frequency Analog: Horizontal: 30.0-83.0kHz, Vertical: 50-76Hz
Digital: Horizontal: 30.0-83.0kHz, Vertical: 50-76Hz
Maximum Resolution 1920 × 1080, 2.1 MegaPixels
Input Connector VGA, DVI-D, HDMI
Input Audio Connector minijack,RCA(L/R)
Input Component
Connector RCA(Video/L/R)
LAN RJ45
Serial Port RS-232C In/Out mini jack
Plug & Play VESA DDC2BTM
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal Analog:0.7Vp-p(Standard),75Ω, Positive
Digital:DVI(DigitalVisualInterfaceStandardRev.1.0)compliance
Digital: HDMI
Input Audio Signal 0.5Vrms maximum
IR Extender Connector
IR In/Out
USB Connector
USB2.0(DC5V,500mA,USBMediaPlayer)
Headphone Connector RCA(L/R)
Speakers Internal:10W×2(Stereospeakers)
Maximum Screen Size 698.40mm W × 392.85mm H / 27.5" W × 15.5" H
Power Source 100-240VAC, 50/60Hz, 1.5A
Power Consumption* 42W typical, Standby mode : 0.5W maximum
Dimensions / Net Weight 726.5×425.5×63.5mm/28.6×16.8×2.5"(W×H×D)
5.2kg / 11.5lbs
Environmental
Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
0 to 40°C / 32 to 104°F
20-80%(Nocondensation)
-20 to 60°C / 4 to 140°F
5-95%(Nocondensation)
Approvals CE
ENGLISH
38 APPENDIX
SPECIFICATIONS : ProLite LE3240S-B2
* USB peripherals and audio equipment are not connected.
NOTE
Size Category 32"
LCD
Panel
Panel technology
VA
Size Diagonal:31,5"(80cm)
Pixel pitch 0.36375mm H × 0.36375mm V
Brightness 350cd/m2(Typical)
Contrast ratio 4000:1(Typical)
Viewable angle Horizontal:178degrees,Vertical:178degrees(Typical)
Response time 6.5ms(Typical,GraytoGray)
Display Colors Approx.16.7M
Sync Frequency Analog: Horizontal: 30.0-83.0kHz, Vertical: 50-76Hz
Digital: Horizontal: 30.0-83.0kHz, Vertical: 50-76Hz
Maximum Resolution 1920 × 1080, 2.1 MegaPixels
Input Connector VGA, DVI-D, HDMI
Input Audio Connector minijack,RCA(L/R)
Input Component
Connector RCA(Video/L/R)
LAN RJ45
Serial Port RS-232C In/Out mini jack
Plug & Play VESA DDC2BTM
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal Analog:0.7Vp-p(Standard),75Ω, Positive
Digital:DVI(DigitalVisualInterfaceStandardRev.1.0)compliance
Digital: HDMI
Input Audio Signal 0.5Vrms maximum
IR Extender Connector
IR In/Out
USB Connector
USB2.0(DC5V,500mA,USBMediaPlayer)
Headphone Connector RCA(L/R)
Speakers Internal:10W×2(Stereospeakers)
Maximum Screen Size 698.40mm W × 392.85mm H / 27.5" W × 15.5" H
Power Source 100-240VAC, 50/60Hz, 1.5A
Power Consumption* 42W typical, Standby mode : 0.5W maximum
Dimensions / Net Weight 726.5×425.5×65.0mm/28.6×16.8×2.6"(W×H×D)
5.7kg / 12.6lbs
Environmental
Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
0 to 40°C / 32 to 104°F
20-80%(Nocondensation)
-20 to 60°C / 4 to 140°F
5-95%(Nocondensation)
Approvals CE, EAC, TÜV-Bauart
ENGLISH
APPENDIX 39
SPECIFICATIONS : ProLite LE4340S-B1 / ProLite LE4340S-B1 A
* USB peripherals and audio equipment are not connected.
NOTE
Model Name ProLite LE4340S-B1 ProLite LE4340S-B1 A
Size Category 43"
LCD
Panel
Panel technology
AMVA3
Size Diagonal:43"(108cm)
Pixel pitch 0.49mm H × 0.49mm V
Brightness 350cd/m2(Typical)
Contrast ratio 3000:1(Typical)
Viewable angle Horizontal:178degrees,Vertical:178degrees(Typical)
Response time 8ms(Typical,GraytoGray)
Display Colors Approx.16.7M
Sync Frequency Analog: Horizontal: 30.0-83.0kHz, Vertical: 50-76Hz
Digital: Horizontal: 30.0-83.0kHz, Vertical: 50-76Hz
Maximum Resolution 1920 × 1080, 2.1 MegaPixels
Input Connector VGA, DVI-D, HDMI
Input Audio Connector minijack,RCA(L/R)
Input Component
Connector RCA(Video/L/R)
LAN RJ45
Serial Port RS-232C In/Out mini jack
Plug & Play VESA DDC2BTM
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal Analog:0.7Vp-p(Standard),75Ω, Positive
Digital:DVI(DigitalVisualInterfaceStandardRev.1.0)compliance
Digital: HDMI
Input Audio Signal 0.5Vrms maximum
IR Extender Connector
IR In/Out
USB Connector
USB2.0(DC5V,500mA,USBMediaPlayer)
Headphone Connector RCA(L/R)
Speakers Internal:10W×2(Stereospeakers)
Maximum Screen Size 940.90mm W × 529.25mm H / 37" W × 20.8" H
Power Source 100-240VAC, 50/60Hz, 2.5A
Power Consumption* 73W typical, Standby mode : 0.5W maximum
Dimensions / Net Weight 968.0×559.5×61.0mm/38.1×22.0×2.4"(W×H×D)
8.7kg / 19.2lbs
Environmental
Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
0 to 40°C / 32 to 104°F
20-80%(Nocondensation)
-20 to 60°C / 4 to 140°F
5-95%(Nocondensation)
Approvals CE, EAC, TÜV-Bauart CE, UKCA, EAC, TÜV-Bauart
ENGLISH
40 APPENDIX
SPECIFICATIONS : ProLite LE4840S
* USB peripherals and audio equipment are not connected.
NOTE
Size Category 48"
LCD
Panel
Panel technology
SVA
Size Diagonal:48"(121cm)
Pixel pitch 0.549mm H × 0.549mm V
Brightness 350cd/m2(Typical)
Contrast ratio 4000:1(Typical)
Viewable angle Horizontal:178degrees,Vertical:178degrees(Typical)
Response time 8ms(Typical,GraytoGray)
Display Colors Approx.10.6B
Sync Frequency Analog: Horizontal: 30.0-83.0kHz, Vertical: 50-76Hz
Digital: Horizontal: 30.0-83.0kHz, Vertical: 50-76Hz
Maximum Resolution 1920 × 1080, 2.1 MegaPixels
Input Connector VGA, DVI-D, HDMI
Input Audio Connector minijack,RCA(L/R)
Input Component
Connector RCA(Video/L/R)
LAN RJ45
Serial Port RS-232C In/Out mini jack
Plug & Play VESA DDC2BTM
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal Analog:0.7Vp-p(Standard),75Ω, Positive
Digital:DVI(DigitalVisualInterfaceStandardRev.1.0)compliance
Digital: HDMI
Input Audio Signal 0.5Vrms maximum
IR Extender Connector
IR In/Out
USB Connector
USB2.0(DC5V,500mA,USBMediaPlayer)
Output Audio Connector RCA(L/R)
Speakers Internal:10W×2(Stereospeakers)
Maximum Screen Size 1054.08mm W × 592.92mm H / 41.5" W × 23.3" H
Power Source 100-240VAC, 50/60Hz, 2.5A
Power Consumption* 89W typical, Standby mode : 0.5W maximum
Dimensions / Net Weight 1082.0×623.5×61.0mm/42.6×24.5×2.4"(W×H×D)
11.5kg / 25.4lbs
Environmental
Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
0 to 40°C / 32 to 104°F
20-80%(Nocondensation)
-20 to 60°C / 4 to 140°F
5-95%(Nocondensation)
Approvals CE, EAC
ENGLISH
APPENDIX 41
SPECIFICATIONS : ProLite LE5540S
* USB peripherals and audio equipment are not connected.
NOTE
Size Category 55"
LCD
Panel
Panel technology
IPS
Size Diagonal:55"(139cm)
Pixel pitch 0.63mm H × 0.63mm V
Brightness 350cd/m2(Typical)
Contrast ratio 1200:1(Typical)
Viewable angle Horizontal:178degrees,Vertical:178degrees(Typical)
Response time 8ms(Typical,GraytoGray)
Display Colors Approx.16.7M
Sync Frequency Analog: Horizontal: 30.0-83.0kHz, Vertical: 50-76Hz
Digital: Horizontal: 30.0-83.0kHz, Vertical: 50-76Hz
Maximum Resolution 1920 × 1080, 2.1 MegaPixels
Input Connector VGA, DVI-D, HDMI
Input Audio Connector minijack,RCA(L/R)
Input Component
Connector RCA(Video/L/R)
LAN RJ45
Serial Port RS-232C In/Out mini jack
Plug & Play VESA DDC2BTM
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal Analog:0.7Vp-p(Standard),75Ω, Positive
Digital:DVI(DigitalVisualInterfaceStandardRev.1.0)compliance
Digital: HDMI
Input Audio Signal 0.5Vrms maximum
IR Extender Connector
IR In/Out
USB Connector
USB2.0(DC5V,500mA,USBMediaPlayer)
Output Audio Connector RCA(L/R)
Speakers Internal:10W×2(Stereospeakers)
Maximum Screen Size 1209.6mm W × 680.4mm H / 47.6" W × 26.8" H
Power Source 100-240VAC, 50/60Hz, 2.5A
Power Consumption* 98W typical, Standby mode : 0.5W maximum
Dimensions / Net Weight 1238.5×711.0×60.0mm/48.8×28.0×2.4"(W×H×D)
16.0kg / 35.3lbs
Environmental
Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
0 to 40°C / 32 to 104°F
20-80%(Nocondensation)
-20 to 60°C / 4 to 140°F
5-95%(Nocondensation)
Approvals CE, EAC
ENGLISH
42 APPENDIX
DIMENSIONS : ProLite LE3240S-B1
210.0mm/8.3”
702.5mm/27.7”
726.5mm/28.6”
396.5mm/15.6”
425.5mm/16.8”
610.0mm/24.0”
63.5mm/2.5”
45.0mm/1.8”
395.0mm/15.6”
150.0mm/5.9”
50.0mm/2.0”
200.0mm/7.9”
100.0mm/3.9”
100.0mm/3.9”
200.0mm/7.9”
8xM4 SCREW HOLE
(VESA MOUNT)
DIMENSIONS : ProLite LE3240S-B2
610.0mm/24.0”
210.0mm/8.3”
702.5mm/27.7”
726.5mm/28.6”
396.5mm/15.6”
425.5mm/16.8”
46.5mm/1.8”
65.0mm/2.6”
395.0mm/15.6”
49.5mm/1.9”
150.0mm/5.9”
100.0mm/3.9”
200.0mm/7.9”
100.0mm/3.9”
200.0mm/7.9”
8xM4 SCREW HOLE
(VESA MOUNT)
ENGLISH
APPENDIX 43
DIMENSIONS : ProLite LE4840S
310.5mm/12.2”
1058.0mm/41.7”
1082.0mm/42.6”
597.0mm/23.5”
623.5mm/24.5”
724.0mm/28.5”
60.0mm/2.4”
46.0mm/1.8”
491.0mm/19.3”
91.5mm/3.6”
136.5mm/5.4”
200.0mm/7.9”
400.0mm/15.7”
200.0mm/7.9”
400.0mm/15.7”
8xM6 SCREW HOLE
(VESA MOUNT)
DIMENSIONS : ProLite LE4340S
278.0mm/10.9”
944.5mm/37.2”
968.0mm/38.1”
532.5mm/21.0”
559.5mm/22.0”
724.0mm/28.5”
45.0mm/1.8”
60.0mm/2.4”
509.0mm/20.0”
109.5mm/4.3”
204.5mm/8.1”
200.0mm/7.9”
400.0mm/15.7”
200.0mm/7.9”
400.0mm/15.7”
8xM6 SCREW HOLE
(VESA MOUNT)
ENGLISH
44 APPENDIX
DIMENSIONS : ProLite LE5540S
354.5mm/14.0”
1213.5mm/47.8”
1238.5mm/48.8”
684.0mm/26.9”
711.0mm/28.0”
944.0mm/37.2”
46.5mm/1.8”
60.0mm/2.4”
589.0mm/23.2”
100.0mm/3.9”
200.0mm/7.9”
400.0mm/15.7”
400.0mm/15.7”
200.0mm/7.9”
400.0mm/15.7”
8xM6 SCREW HOLE
(VESA MOUNT)
ENGLISH
APPENDIX 45
COMPLIANT TIMING
* means supported the timing.
Timing
VESA
VGA 640x480
31.469 59.940 25.175
37.861 72.809 31.500
37.500 75.000 31.500
SVGA 800x600 37.879 60.317 40.000
46.875 75.000 49.500
XGA 1024x768 48.363 60.004 65.000
60.023 75.029 78.750
WXGA 1280x768 47.776 59.870 79.500
WXGA 1280x800 49.702 59.810 83.500
SXGA 1280x960 60.000 60.000 108.000
SXGA 1280x1024 63.981 60.020 108.000
WXGA1360x768 47.712 60.020 85.500
WXGA1366x768 47.712 59.700 85.500
UXGA 1600x1200 75.000 60.000 162.000
FHD 1920x1080 67.500 60.000 148.500
IBM 720x400 31.467 70.080 28.320
MAC
640x480 35.000 66.667 30.240
832x624 49.725 74.500 57.283
1152x870 68.681 75.062 100.000
SD
NTSC(SD480i) 15.734 59.940 13.500
PAL(SD576i) 15.625 59.940 13.500
SECAM(SD576i) 15.625 59.940 13.500
480i 60Hz 15.734 59.940 27.000
576i 50Hz 15.625 50.000 13.500
480p 60Hz 31.469 59.940 27.000
576p 50Hz 31.250 50.000 27.000
HD
720p 50Hz 37.500 50.000 27.000
60Hz 45.000 60.000 74.250
1080i 50Hz 28.125 50.000 74.250
60Hz 33.716 60.000 74.250
1080p 50Hz 56.250 50.000 148.500
60Hz 67.500 60.000 148.500
fH(kHz)
fV(Hz)
Dot clock
(MHz)
HDMI
VGA
YPbPr
AV
DVI
M150P21