iiyama LH6542UHS-B3 User Manual
Displayed below is the user manual for LH6542UHS-B3 by iiyama which is a product in the Signage Displays category. This manual has pages.
Related Manuals
ENGLISH
Thank you very much for choosing the iiyama
LCD monitor for signage.
We recommend that you take a few minutes
to read this comprehensive manual carefully
before installing and switching on the monitor.
Please keep this manual in a safe place for
your future reference.
USER MANUAL
ENGLISH
ENGLISH
Wereservetherighttochangespecicationswithoutnotice.
All trademarks used in this user manual are the property of their respective owners.
Eprel registration number LH6542UHS-B3 : 429798, LH7542UHS-B3 : 432080, LH8642UHS-B3 : 435970
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the
address: http://www.iiyama.com
YoucanaccesstheWebpageofdierentcountriesfromthere.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC
Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU
“RoHS Directive”.
Warning
This is a class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PL6542UH, PL7542UH, PL8642UH
ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................ 1
SAFETY PRECAUTIONS................................................................1
SPECIAL NOTES ON LCD MONITORS .........................................3
CUSTOMER SERVICE ...................................................................5
CLEANING ......................................................................................5
BEFORE YOU OPERATE THE MONITOR ..........................................6
FEATURES......................................................................................6
CHECKING THE CONTENTS OF THE PACKAGE ........................6
UNPACKING ...................................................................................7
CONTROLS AND CONNECTORS : MONITOR ..............................8
INSTALLATION ............................................................................. 11
CONTROLS AND CONNECTORS : REMOTE CONTROL ...........13
PREPARING THE REMOTE CONTROL.......................................14
ID REMOTE CONTROL ................................................................15
BASIC OPERATION ......................................................................16
CONNECTING YOUR THE MONITOR : ProLite LH6542UHS ....19
CONNECTING YOUR THE MONITOR : ProLite LH7542UHS ....20
CONNECTING YOUR THE MONITOR : ProLite LH8642UHS ....21
COMPUTER SETTING .................................................................25
OPERATING THE MONITOR .............................................................26
ADJUSTMENT MENU CONTENTS ..............................................28
SCREEN ADJUSTMENTS ............................................................46
STANDBY FEATURE ....................................................................49
TROUBLE SHOOTING ......................................................................50
RECYCLING INFORMATION .............................................................51
APPENDIX ........................................................................................52
SPECIFICATIONS : ProLite LH6542UHS-B3 ...............................52
SPECIFICATIONS : ProLite LH7542UHS-B3 ...............................53
SPECIFICATIONS : ProLite LH8642UHS-B3 ...............................54
DIMENSIONS : ProLite LH6542UHS ............................................55
DIMENSIONS : ProLite LH7542UHS ............................................55
DIMENSIONS : ProLite LH8642UHS ............................................56
COMPLIANT TIMING ....................................................................56
ENGLISH
FOR YOUR SAFETY 1
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the
monitor and contact your dealer or iiyama service center immediately. Further use may be
dangerousandcancausereorelectricshock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
reorelectricshock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
anyobjectinsidemaycausere,electricshockordamage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Donotusewhere watermaybesplashedorspiltontothemonitor asitmaycausereorelectric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Besuretooperatethemonitoronlywiththespeciedpowersupply.Useofanincorrectvoltagewill
causemalfunctionandmaycausereorelectricshock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objectsonthecables.Ifdamaged,thecablesmaycausereorelectricshock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS
ENGLISH
2 FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or
smokyareasasitmaycausere,electricshockordamage.Youshouldalsoavoidareaswherethe
sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not
pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
re.Toallowadequateaircirculation,placethemonitoratleast10cm(or4inches)fromanywalls.
Operating the monitor on its back, side, upside down or on a carpet or any other soft material may
also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
Whenyoumovethemonitor,turnothepowerswitch,unplugthemonitorand besurethesignal
cableisdisconnected.Ifyoudonotdisconnectthem,itmaycausereorelectricshock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to
avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable
itselfasthismaycausereorelectricshock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may
damage your computer.
REMARK FOR 24/7 USAGE
Thisproductisnotspecicallydesignedfor24/7usage.
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
Foroptimalviewingcomfort,themonitorshouldbejustbeloweyeleveland40-60cm(16-24inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
OTHERS
ENGLISH
FOR YOUR SAFETY 3
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE -WhenyourstturnontheLCDmonitor,thepicturemaynottinthedisplayarea
because of the type of computer that is used. In this case, adjust the picture position to
the correct position.
-Youmayndslightlyunevenbrightnessonthescreendependingonthedesktop
pattern you use.
- Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screenisrecoveredslowlybychangingtheimageorturningothePowerSwitchfor
hours.
SPECIAL NOTES ON LCD MONITORS
This LCD cannot be used outdoors.
This LCD cannot be used with the screen facing upwards.
If you use a cable longer than the supplied one, the picture quality is not guaranteed.
ENGLISH
4 FOR YOUR SAFETY
USAGE CONFIRMATION
This product is designed for optimum usage at 18hours per day.
The monitor is compatible for usage in Landscape/Portrait applications.
IMAGE PERSISTENCE / IMAGE STICKING
Please be aware that all LCD screens can experience Image Persistence or Image Sticking. This
occurs when a residual image remains visible on a screen when static images are displayed for long
periods of time. LCD Image Persistence is not permanent but constant images being displayed for a
long period of time should be avoided.
To counteract Image Persistence, turn off the monitor for as long as the previous image was
displayed, so if an image was on the monitor for 1 hour and there is evidence of a residual or “ghost”
image,youshouldturnothemonitorfor1hourinordertocleartheresidualimage.
For all LFD products, iiyama recommends displaying moving images and utilising a moving screen
saveratregularintervalswheneverthescreenisidle.Youcouldalsoturnothemonitorwhennot
in use to assist the prevention.
Other waystoreducetheriskofImagePersistencewillbetoutilisetheFAN-onfunction(if
available),LowBacklightandLowBrightnesssettings.
FOR EXTENDED USE AS A PUBLIC MONITOR
Image Sticking on LCD Panel
When a static image is displayed for hours, an electric charge trace remains near the electrode
insidetheLCDproducinga“ghost”image.(ImagePersistence).
Image Persistence is not a permanent feature.
Recommendations
To prevent Image Sticking and promote longer life expectancy of monitor, we recommend the
following:
1. Avoid static images displayed for long periods – change static images on continuous loop.
2.Turnomonitorwhennotinuse,eitherbyremotecontroloruseStandbyorSchedulefunctions.
3. Check the Monitor Menu Settings for "Pixel Shift" etc. and activate it when available. This will
reducetheImageStickingEect.
4.Whenmonitorisinstalledinhighambienttemperatureenvironment(s)orinanenclosedposition,
utilise the Cooling Fan, Screen Saver and Low Brightness functions.
5. Suitable ventilation for any monitor is an expectation of any installation – climate control systems
may need to be employed.
6. We strongly recommend utilisation of active cooling with fans for long operation times or high
ambient temperature environments.
ENGLISH
FOR YOUR SAFETY 5
NOTE
If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
WARNING
If you drop any materials or liquids such as water into the
monitor
when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.
CAUTION
For safety reasons, turn o the power switch and unplug the monitor before you
clean it.
NOTE
To protect the LCD panel, do not scratch or rub the screen with a hard object.
Never use any of the following strong solvents. These will damage the cabinet and
the LCD screen.
Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
Thinner Benzine Abrasive cleaner
Spray-type cleaner Wax Acid or Alkaline solvent
CABINET Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
LCD
SCREEN
Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
CUSTOMER SERVICE
CLEANING
ENGLISH
6 BEFORE YOU OPERATE THE MONITOR
The following accessories are included in your package. Check to see if they are enclosed with
the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional
iiyamaoce.
* The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used. However, all guarantees and warranties are void for any
problems or damage caused by a power cable not supplied by iiyama.
An approved power cable greater or equal to H05VVF, 3G, 0.75mm2 must be used.
Power Cable*
HDMI Cable RS-232C Cable
Remote Control Battery(2pcs)
Stickers for screw holes 2sheets(Stickers:20pcs) EU Energy Label
Safety Guide Quick Start Guide
BEFORE YOU OPERATE THE MONITOR
CHECKING THE CONTENTS OF THE PACKAGE
CAUTION
FEATURES
Supports Resolutions up to 3840 × 2160
High Contrast 1300:1 (Typical) / Brightness 500cd/m
2
(Typical) :
ProLite LH6542UHS
High Contrast 1400:1 (Typical) / Brightness 500cd/m
2
(Typical) :
ProLite LH7542UHS
High Contrast 1200:1 (Typical) / Brightness 500cd/m
2
(Typical) :
ProLite LH8642UHS
Digital Character Smoothing
Automatic Set-up
Stereo Speakers
2 × 10W Stereo Speakers
Standby Feature (VESA DPMS Compliant)
VESA Mounting Standard (400mm×400mm) Compliant
:
ProLite LH6542UHS
VESA Mounting Standard (600mm×400mm) Compliant
:
ProLite LH7542UHS / ProLite LH8642UHS
ENGLISH
BEFORE YOU OPERATE THE MONITOR 7
UNPACKING
CAUTION
Moving the monitor requires at least two people. If not, it may drop and could result in a serious
injury.
ENGLISH
8 BEFORE YOU OPERATE THE MONITOR
CONTROLS AND CONNECTORS : MONITOR
<Back Controller>
<Front>
Power Button
MUTE Mute Button
INPUT Input Select
Button
+ + Button
- - Button
Up Button
Down Button
MENU Menu Button
INPUT MENU
MUTE
Power Indicator
Green Lighting : Normal Operation
Flash : When SCHEDULE is enabled.
Red IfturnothePowerButtonontheRemoteControlandthe
Back Controller. Standby mode
O PowerO
Remote Sensor Remote Sensor
ENGLISH
BEFORE YOU OPERATE THE MONITOR 9
<Back>
ProLite LH6542UHS
ProLite LH7542UHS
ENGLISH
10 BEFORE YOU OPERATE THE MONITOR
ProLite LH8642UHS
AC SWITCH
(ON)/ (OFF)
MAIN
POWER Main Power Switch
AC IN AC-INLET ACConnector( :Alternatingcurrent)( )(AC-IN)
LAN RJ45 RJ45 Connector
AUDIO OUT Mini Jack Headphone Connector
DisplayPort IN DisplayPort DisplayPort Connector
DisplayPort OUT DisplayPort DisplayPort Connector
DVI IN DVI-I DVI-I Connector
HDMI1 IN HDMI HDMI Connector
HDMI2 IN HDMI HDMI Connector
RS232C OUT Mini Jack RS232C Connector
RS232C IN Mini Jack RS232C Connector
USB2 USB2.0
(5V,500mA) USB Connector
USB1 USB2.0
(5V,500mA) USB Connector
MICRO SD Micro SD slot
IR OUT IR IR Connector
IR IN IR IR Connector
AUDIO IN Mini Jack Audio Connector
HDMI3 IN HDMI HDMI Connector
OptionSlot(SDM-L)
Speakers
Handles
Keyhole for Security Lock
ENGLISH
BEFORE YOU OPERATE THE MONITOR 11
INSTALLATION
CAUTION
Follow the manual instructions for the type of mount you have selected. Refer all servicing to
qualiedservicepersonnel.
Moving the monitor requires at least two people.
Before installing, please make sure the wall is strong enough to hold the necessary weight of the
monitor and the mount.
[WALL MOUNTING]
When using the wall mounting, consideration of thickness of the mounting stage needs to be taken.
Tighten the M8
Screws(4pcs)
with washer which “L” length is 15mm to fasten the monitor. Using
a screw longer than this may cause electric shock or damage because it may contact with the
electrical parts inside the monitor.
CAUTION
L
Mounting Stage Screw
Chassis
[ROTATING THE MONITOR]
This monitor is designed to be compatible in both landscape and portrait modes.
A
A
Portrait
Available
Power Indicator
Landscape
A
A
Not Available
Power Indicator
Power Indicator
Power Indicator
ENGLISH
12 BEFORE YOU OPERATE THE MONITOR
[PLACING THE STICKERS]
If you feel the screw holes are too visible in portrait mode, please use the stickers to cover
them.
ProLite LH6542UHS
Screw holes : 13
ProLite LH7542UHS
Screw holes : 13
ProLite LH8642UHS
Screw holes : 17
ENGLISH
BEFORE YOU OPERATE THE MONITOR 13
CONTROLS AND CONNECTORS : REMOTE CONTROL
Turns the monitor ON and OFF.
[PLAY]
Controlplaybackofmediales.
: Play
:
Stop
:
Pause
: Quick-Return
: Fast-Forward
SOURCE
Selects the source.
Press or button to select from
HDMI1, HDMI2, HDMI3, DVI-I,
DisplayPort, VGA, SDM, Media
Player, Browser, iiSignage, PDF
Player or Custom. Press [OK]
buttontoconrmandexit.
HOME Opens the display’s on-screen
menu systems.
LIST Not available on this model.
Navigates through submenus and
settings.
: Up Button
: Down Button
: Left Button
:
Right Button
OK Conrmsyourselectionorsave
changes.
ADJUST Auto Adjust function only available
when VGA input is selected.
MUTE Turnsonorothemutefunction
when the Menu is not displayed.
COLOR
Select tasks or options.
Blue:Zoomin(PDFPlayer)
Yellow:Zoomout(PDFPlayer)
NUMBER/
ID SET/ENTER Enter text for network setting.
ID Mode ID: To enter ID Mode
NORMAL: To leave ID Mode
FORMAT Change picture format.
BACK Returns to a previous menu or
closes the OSD Menu.
INFO Provides source and resolution
information.
OPTIONS Not available on this model.
VOLUME - / +
VOLUME-: Decreases the sound
volume.
VOLUME+: Increases the sound
volume.
ENGLISH
14 BEFORE YOU OPERATE THE MONITOR
To use the remote control, insert the two dry batteries.
PREPARING THE REMOTE CONTROL
CAUTION
DonotuseanyotherbatteriesotherthanthosespeciedinthismanualfortheRemoteControl.
Do not insert old and new batteries together in the Remote Control.
Make sure that the terminals match the "+" and "-" indications in the battery compartment.
Remove the dead batteries immediately to prevent them from liquid leaking into the battery
compartment.
Burstbatteriesortheelectrolytefromthesebatteriesmaycausestains,reorinjury.
Press and then slide the battery cover to open it.
Align and insert twoAAAbatteriesaccordingtotheirplusandminusports(asindicatedinthe
remotecontrol).
Replace the battery cover.
Battery x 2
ENGLISH
BEFORE YOU OPERATE THE MONITOR 15
YoucansettheremotecontrolIDwhenyouwanttousetheremotecontrolonspecicmonitors.
IDMode(ToenterIDMode):PressandholdtheIDbuttonuntiltheredLEDblinkstwice.
NormalMode(ToleaveIDMode): PressandholdtheNormalbuttonuntilthegreenLEDblinks
twice.
ID REMOTE CONTROL
Programming ID Mode
To assign an ID to a remote control.
1. Enter ID Mode.
2. Press and hold the ID SET button until the red LED turned on.
3.Usingthenumberbutton,inputthedesiredID.(01-255)
4.PresstheENTERbuttontoconrmID.
5.TheredLEDwillblinktwicewhenIDhasbeenconrmed.
6. Press the ID SET button will exit the ID Mode. The green LED turned on.
• Not pressing any button within 10 seconds will exit the ID Mode.
• If an error pressing of buttons other than the digits occured, wait 1 second after the red LED
lightsoandthenlightsupagain,thenpressthecorrectdigitsagain.
• To cancel or stop programming an ID, press the ID SET button.
• It is necessary to set up the ID number for each monitor before selecting its ID number.
Use ID Mode
1. Enter ID Mode.
2. Input the ID of the monitor which would like to control by number button.
3. Press the ENTER button.
NOTE
NOTE Refer to the above instructions when taking out the batteries.
Replace with new batteries when the Remote Control does not work close to the monitor.
Use AAA dry batteries. Risk of explosion if battery is replaced by an incorrect type.
Operate the Remote Control by pointing it toward the Remote Sensor on the monitor.
Other manufacturers remote control will not work with this monitor. Use the provided
Remote Control ONLY.
Usedbatteriesneededtofollowthecityruletobediscarded.(suggestion:todisposeof
usedbatteriespleasefollowcorrectpolicyasperyourcouncilregulations)
Batteriesshallnotbeexposedtoexcessiveheatsuchassunshine,reorthelike.
If you do not intend to use the remote control for a long period, remove the batteries.
ENGLISH
16 BEFORE YOU OPERATE THE MONITOR
BASIC OPERATION
Turning the monitor ON
The monitor is turned On and the Power Indicator turns to
Green when you press the POWER button on the monitor or
theRemoteControl.ThemonitoristurnedOandthePower
Indicator turns to Red when you press the POWER button on
the monitor or the Remote Control. Press again to turn On the
monitor.
NOTE
Even when using the standby mode or turning OFF the
Power Switch, the monitor will consume a small amount of
electricity. Disconnect the Power Cable from the power supply
whenever the monitor is not in use or during the night, to avoid
unnecessary power consumption.
[Remote Control]
Display the adjustment menu page
The menu page appears on the screen when you press the
MENU button on the monitor or the HOME button on the
Remote Control.
The menu page disappears when you press the
BACK
button on the Remote Control again.
[Monitor]
[Remote Control]
[Monitor]
INPUT MENU
MUTE
INPUT MENU
MUTE
ENGLISH
BEFORE YOU OPERATE THE MONITOR 17
Move the cursor horizontally
Select menu or setting, or perform the adjustment by pressing
the + / - button on the monitor or the / button on the
remote control while the menu page is displayed on the
screen.
Move the cursor vertically
Select adjustment by pressing the / button on the
monitor or the / button on the remote control while the
menu page is displayed on the screen.
[Remote Control]
[Monitor]
[Remote Control]
[Monitor]
INPUT MENU
MUTE
INPUT MENU
MUTE
ENGLISH
18 BEFORE YOU OPERATE THE MONITOR
Adjust the volume of sound
Press the + / - button on the monitor or the remote control
to adjust the volume of sound when the menu page is not
displayed on the screen.
Switch the input signal
This is activated when you successively press the INPUT
button on the monitor or the SOURCE button on the remote
control.
[Remote Control]
[Monitor]
[Remote Control]
[Monitor]
INPUT MENU
MUTE
INPUT MENU
MUTE
ENGLISH
BEFORE YOU OPERATE THE MONITOR 19
CONNECTING YOUR THE MONITOR : ProLite LH6542UHS
Ensurethatboththecomputerandthemonitorareswitchedo.
Connect the computer to the monitor with the signal cable.
Connect the computer with the RS-232C Cable from the monitor.
ConnectthePowerCabletothemonitorrstandthentothepowersource.
Turnonyourmonitor(MainPowerSwitchandPowerSwitch)andcomputer.
Makesurethatthebuildinginstallationhasacircuitbreakerof120/240V,20A(maximum).
The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regionaliiyamaoce.
MakesureyoutightenthengerscrewsateachendoftheSignalCable.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing
loss.
[Example of Connection]
<Back>
NOTE
* DVI-I cable is not supplied with the monitor. If you use low quality DVI-I cable, it may cause a result
of electro-magnetic interference. Please contact the iiyama Support Centre in your country if you
wish to connect the monitor via the DVI input.
Computer
AV Equipment etc.
DVI-I Cable (Not Included)*
HDMI Cable (Not Included)
Power Cable (Accessory)
RS-232C Cable (Accessory)
GAME
Equipment etc.
HDMI Cable (Accessory)
DisplayPort Cable
(Not Included)
Audio Cable
(Not Included)
ENGLISH
20 BEFORE YOU OPERATE THE MONITOR
CONNECTING YOUR THE MONITOR : ProLite LH7542UHS
Ensurethatboththecomputerandthemonitorareswitchedo.
Connect the computer to the monitor with the signal cable.
Connect the computer with the RS-232C Cable from the monitor.
ConnectthePowerCabletothemonitorrstandthentothepowersource.
Turnonyourmonitor(MainPowerSwitchandPowerSwitch)andcomputer.
Makesurethatthebuildinginstallationhasacircuitbreakerof120/240V,20A(maximum).
The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regionaliiyamaoce.
MakesureyoutightenthengerscrewsateachendoftheSignalCable.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing
loss.
[Example of Connection]
<Back>
NOTE
Computer
AV Equipment etc.
Power Cable (Accessory)
GAME
Equipment etc.
HDMI Cable (Accessory)
DVI-I Cable (Not Included)*
HDMI Cable (Not Included)
DisplayPort Cable
(Not Included)
RS-232C Cable (Accessory)
Audio Cable
(Not Included)
* DVI-I cable is not supplied with the monitor. If you use low quality DVI-I cable, it may cause a result
of electro-magnetic interference. Please contact the iiyama Support Centre in your country if you
wish to connect the monitor via the DVI input.
ENGLISH
BEFORE YOU OPERATE THE MONITOR 21
CONNECTING YOUR THE MONITOR : ProLite LH8642UHS
Ensurethatboththecomputerandthemonitorareswitchedo.
Connect the computer to the monitor with the signal cable.
Connect the computer with the RS-232C Cable from the monitor.
ConnectthePowerCabletothemonitorrstandthentothepowersource.
Turnonyourmonitor(MainPowerSwitchandPowerSwitch)andcomputer.
Makesurethatthebuildinginstallationhasacircuitbreakerof120/240V,20A(maximum).
The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regionaliiyamaoce.
MakesureyoutightenthengerscrewsateachendoftheSignalCable.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing
loss.
[Example of Connection]
<Back>
NOTE
Computer
AV Equipment etc.
GAME
Equipment etc.
HDMI Cable (Accessory)
RS-232C Cable (Accessory)
DVI-I Cable (Not Included)*
HDMI Cable (Not Included)
DisplayPort Cable
(Not Included)
Power Cable (Accessory)
Audio Cable
(Not Included)
* DVI-I cable is not supplied with the monitor. If you use low quality DVI-I cable, it may cause a result
of electro-magnetic interference. Please contact the iiyama Support Centre in your country if you
wish to connect the monitor via the DVI input.
ENGLISH
22 BEFORE YOU OPERATE THE MONITOR
[ Connection example with the peripheral device ]
CAUTION
Turnothepowerswitchandunplugthemonitor and peripherals before connection to avoid electric
shock or damage.
NOTE
Refer to the user manual of peripherals at the same time.
Ensure you have the necessary cables as required.
ProLite LH6542UHS
ProLite LH7542UHS
ENGLISH
BEFORE YOU OPERATE THE MONITOR 23
[ About the daisy chain ]
PC
[RS-232C IN]
[RS-232C]
[RS-232C OUT] [RS-232C IN]
MONITOR1 MONITOR2
Monitor control connection
RS-232C
ProLite LH8642UHS
PC
[DPIN]
[DP]
]NIPD[]TUOPD[
MONITOR1 MONITOR2
Digital video connection
DisplayPort
ENGLISH
24 BEFORE YOU OPERATE THE MONITOR
PC
[RJ-45]
[RJ-45] ROUTER
INTERNET
Monitor
[ To setup the network ]
1. Switch on the router and switch on its DHCP setting.
2. Connect the router to this monitor with an Ethernet cable.
3. Press HOME button on the remote control, then select Setup.
4. Select "Connect to network", then press OK button.
5. Follow the on-screen instructions to install the network.
6.Waitforthismonitortondthenetworkconnection.
7. If you are prompted, agree to the “End User Licence Agreement”.
Connecting with a shielded CAT-5 Ethernet cable to comply with the EMC directive.
NOTE
ENGLISH
BEFORE YOU OPERATE THE MONITOR 25
Procedure for turning ON the Power Switch
TurnONthemonitorrst,andthenthecomputer.
Signal Timing
Change to the desired signal timing listed on page 56: COMPLIANT TIMING.
Windows XP/Vista/7/8/8.1/10 Plug & Play
The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs
on Windows XP/Vista/7/8/8.1/10 by connecting the monitor to DDC2B compliant computer with
the Signal Cable supplied.
For installation on Windows XP: The monitor Information File for iiyama monitors may be
necessary for your computer and obtained via the Internet, using the address:
http://www.iiyama.com
Monitor Drivers are not required in most cases for Macintosh or Unix operating
systems.Forfurtherinformation,pleasecontactyourcomputerdealerrstforadvice.
COMPUTER SETTING
NOTE
ENGLISH
26 OPERATING THE MONITOR
OPERATING THE MONITOR
To create the best picture, your iiyama LCD
monitor
has been preset at the factory with the COMPLIANT
TIMING shown on page 56. You are also able to adjust the picture by following the button operation
shown below.
For more detailed adjustments, see page 46 for SCREEN ADJUSTMENTS.
Press the HOME button on the remote control or the MENU button on the monitor
to start the On Screen Display feature. There are additional Menu items which can
be switched by using the / buttons on the remote control or the / buttons on
the monitor.
Select the Menu item of the adjustment you want to make. Press the OK button on
the remote control or the + button on the monitor and enter the menu page. Then,
use the / buttons on the remote control or the / buttons on the monitor to
highlight the desired adjustment item.
Press the OK button on the remote control or the + button on the monitor again. Use
the / buttons on the remote control or the + / - buttons on the monitor to make
the appropriate adjustment or setting.
Press the BACK button on the remote control or the MENU button on the monitor
to leave the menu, and the settings you just made would be automatically saved.
Sharpness
Black level
Tint
Color
Noise reduction
Gamma selection
Color temperature
Color controal
Smart power
Picture
Screen
Audio
Configuration1
Contrast
20
50
50
55
Medium
Native
50
Configuration2
Advanced option
Overscan
Native
Action
Off
Off
Brightness 90
For example, to correct for vertical position, select Menu item of "Screen". Press the OK button
on the remote control or the + button on the monitor. Then, select "V. Position" by using the /
buttons on the remote control or the / buttons on the monitor.
Use the / buttons on the remote control or the + / - buttons on the monitor to change
the vertical position settings. The vertical position of the overall monitor should be changing
accordingly while you are doing this.
Press the BACK button on the remote control or the MENU button on the monitor lastly, it
ends, all changes are saved in the memory.
Clock
Clock Phase
Zoom mode
Custom zoom
Auto adjust
Screen reset
Picture
Screen
Audio
Configuration1
H position
Full
Action
Action
Configuration2
Advanced option
Action
V position
50
V position
ENGLISH
OPERATING THE MONITOR 27
The BACK button on the remote control or the + button on the monitor can be used to return
previous menu item.
Any changes are automatically saved in the memory when the On Screen Display
disappears.
TurningothepowershouldbeavoidedwhileusingtheMenu.
Adjustments for H./V. Position, Clock and Phase are saved for each signal timing. Except for
these adjustments, all other adjustments have only one setting which applies to all signal timings.
NOTE
Direct
You can skip the Menu items and directly display an option setting screen by using the following
button operations.
Auto Adjust:
Press the ADJUST Button when the Menu is not displayed.
Zoom mode:
Press the FORMAT Button when the Menu is not displayed.
* Available for Remote Control only.
ENGLISH
28 OPERATING THE MONITOR
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option Button to Press
Too dark
Too bright
Brightness*1
Contrast*4Too dull
Too intense
Sharpness*2,4 Too soft
Too sharp
Color*4Too week
Too strong
Black level*4Black is too dark
Black is too bright
Picture
Tint*4
O
Low
Medium
High
Purplish
Greenish
Noise Reduction isturnedo.
Electronicimagenoisecausedbydierentmediaplayersis
reduced.
Electronicimagenoisecausedbydierentmediaplayersis
reduced more than Low.
Electronicimagenoisecausedbydierentmediaplayersis
reduced more than Medium.
Noise reduction*4
Color temperature*4
Gamma selection*3,4 You can set the Gamma.
Native / 2.2 / 2.4 / s gamma / D-image
Sharpness
Black level
Tint
Color
Noise reduction
Gamma selection
Color temperature
Color controal
Smart power
Picture
Screen
Audio
Configuration1
Contrast
20
50
50
55
Medium
Native
50
Configuration2
Advanced option
Overscan
Native
Action
Off
Off
Brightness 90
Auto Electronicimagenoisecausedbydierentmediaplayersis
reduced by selecting the Auto-setting.
9300°K
7500°K
6500°K
10000°K
Native
User 1
5000°K
User preset 1
Original color temperature
4000°K
3000°K
User 2 User preset 2
ENGLISH
OPERATING THE MONITOR 29
*1
Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright.
Brightness adjustment is disabled when Brightness of Panel saving is on.
*2 NotavailableforVGA(Video)input.
*3 Press to display the options.
*4 Not available for Media Player, Browser, iiSignage, PDF Player and Custom inputs.
Picture reset Picture setting will be restored to factory-preset data.
Too weak
Too strong
User-R
User-G
User-B
Adjustment Item Problem / Option Button to Press
Picture
Color control
Set user color.
Brightnessofback-lightisreduced.(80%)
O Normal
Smart power Midium
Brightness of back-light is reduced more than Midium.(65%)
High
Overscan*4O Over scan isturnedo.
On Displayareaabout95%.
Sharpness
Black level
Tint
Color
Noise reduction
Gamma selection
Color temperature
Color controal
Smart power
Picture
Screen
Audio
Configuration1
Contrast
20
50
50
55
Medium
Native
50
Configuration2
Advanced option
Overscan
Picture reset
Native
Action
Off
Off
Action
Cancel
Reset
Return to Menu.
ENGLISH
30 OPERATING THE MONITOR
Adjustment Item Problem / Option Button to Press
Screen
Clock*1,4
Too left
Too right
Too low
Too high
H Position*1
V Position*1
Too narrow
Too wide
Full*2,3
Enlargethepicturehorizontallytollthescreenifthe
picturesourceis4:3(standarddenition).Whenthe
picturesourceis16:9(highdenition),itisnotscaled.
Zoom mode 4:3*2,3 Display all pictures in 4:3 aspect ratio.
Real*2,3 Display the picture dot by dot.
16:9*2,3 Display all pictures in 16:9 aspect ratio.
Custom zoom*2
Zoom
Zoom the horizontal and vertical size of the image
simultaneously.
H zoom
V zoom
Zoom the horizontal size of the image.
Zoom the vertical size of the image.
Auto adjust*1,5 Adjust Position, Clock and Clock Phase automatically.
Screen reset Screen setting will be restored to factory-preset data.
*1 Only VGA input.
*2 Only VGA and HDMI inputs.
*3 Only Mediaplayer input.
*4 See page 46 for SCREEN ADJUSTMENTS.
*5 For best results, use the Auto Adjust in conjunction with the adjustment pattern.
See page 46 for SCREEN ADJUSTMENTS.
Clock
Clock Phase
Zoom mode
Custom zoom
Auto adjust
Screen reset
Picture
Screen
Audio
Configuration1
H position
Full
Action
Action
Configuration2
Advanced option
Action
V position
Clock Phase*1,4 Tocorrectickeringtextorlines
Cancel
Reset
Return to Menu.
21:9*2,3 Display all pictures in 21:9 aspect ratio.
ENGLISH
OPERATING THE MONITOR 31
Adjustment Item Problem / Option Button to Press
Bass Too weak
Too strong
Audio
Audioout(lineout)
Treble Too weak
Too strong
Adjust audio output volume.
Audio reset
Audio setting will be restored to factory-preset data.
Too soft
Too loud
Balance Left side speaker is louder.
Right side speaker is louder.
Maximum volume
Minimum volume
Set the maximum volume.
Set the minimum volume.
Return the sound volume to the previous level.
Turnothesoundtemporarily.
O
On
Mute
Select the VGA input.
Analog
Select the HDMI/DisplayPort input.
Digital
Audio Source
Audio out sync O
On
Disableaudioout(lineout)volume.
Enableaudioout(lineout)volume.
Treble
Bass
Volume
Audio out (line out)
Maximum volume
Minimum volume
Mute
Picture
Screen
Audio
Configuration1
Balance
20
100
0
Configuration2
Advanced option
Off
Audio source
Audio reset
Audio Out Sync
50
50
20
50
Digital
Action
Off
Speaker Setting Off
Volume Too soft
Too loud
Cancel
Reset
Return to Menu.
Speaker Setting O
On
Disable the built-in speaker.
Enable the built-in speaker.
ENGLISH
32 OPERATING THE MONITOR
Adjustment Item Problem / Option Button to Press
Conguration1
Switch on state
Powero Themonitorwillremainowhenthepowercordis
connected to a wall outlet.
Forced on The dmonitor will turn on when the power cord is
connected to a wall outlet.
Last status
Themonitorwillreturntothepreviouspowerstatus(on/
o/standby)whenremovingandreplacingthepower
cord.
Panel saving
Brightness
Brightness isturnedo.
For the monitor to slightly expand the image size and
shiftthepositionofpixelsinfourdirections(up,down,
leftorright).
O
On The image brightness will be reduced to an
appropriate level.
Pixel shift*1O
Auto
10-900
Pixel shift isturnedo.
Move the position of the image
automatically.
Move the position of the image at set
intervals.
RS232-routing
Select the network control port.
RS232 / LAN RS232
Boot on source*2,3
Input
Select input source when boot up.
HDMI1 / HDMI2 / HDMI3 / DVI-I / DisplayPort / VGA / SDM*
4
/ Media Player / Browser / iiSignage / PDF Player / Custom
Playlist Select playlist index for Mediaplayer, Browser and PDF
player.
*1 Only VGA and HDMI input.
*2 No failover function, system will keep source even the source is no signal input.
*3 Press to display the options.
*4 It can be used only when SDM-L is installed.
Panel saving
RS232 routing
Boot on source
Configuration1 reset
Factory reset
Picture
Screen
Audio
Configuration1
Switch on state
Action
Configuration2
Advanced option
Action
Action
RS232
Action
Force on
WOL Action
Last input
When the power is turned on, it starts with the same
settingaswhenthepowerwaslastturnedo.
Disable / Enable
Conguration1reset
Conguration1 setting will be restored to factory-preset data.
Factory reset Factory-preset data is restored.
Cancel
Reset
Return to Menu.
Cancel
Reset
Return to Menu.
WOL O
On
Disable wake on LAN function.
Enable wake on LAN function.
ENGLISH
OPERATING THE MONITOR 33
Adjustment Item Problem / Option Button to Press
Conguration2
OSDturno
You can set the OSD display duration time between
5 and 120 seconds.
O/5-120seconds
OSD H position OSD is too left
OSD is too right
OSD is too low
OSD is too high
OSD V position
Information OSD
Set the period of time the information OSD is
displayed on the upper right corner of the screen.
O/1-60seconds
Logo iiyama Logo displayed when the monitor is turned on.
On
O iiyama Logo does not display when the monitor is
turned on.
User*1Custom logo option in android is set, there will be only
custom logo when the monitor is turned on.
Monitor ID Set ID to the
monitor
.
1 - 254
Shows information about your monitor, including Model name, Serial
No., Operation hours and SW version.
Monitor information
HDMI Version*3Set the version of the HDMI.
1.4 / 2.0
Conguration2reset
*1 When you would like to use a Custom Boot Logo, go to Settings Signage Display General
settings and set Boot Logo.
*2 Suitable for DisplayPort input only.
*3 Suitable for HDMI input only.
OSD H position
OSD V position
Information OSD
Logo
Monitor ID
Monitor information
Picture
Screen
Audio
Configuration1
OSD turn off
On
Action
Configuration2
Advanced option
Action
50
50
10
115
HDMI Version
Configuration2 reset Action
Action
System Rotation
Heat status
DP Version
Conguration2 setting will be restored to factory-preset data.
Cancel
Reset
Return to Menu.
System Rotation Landscape
Portrait
Display the OSD in Landscape mode.
Display the OSD in Portrait mode.
This function allows you to check the thermal status of the display at
any time.
Heat status
DP Version*2Set the version of the DisplayPort.
1.1 / 1.2
ENGLISH
34 OPERATING THE MONITOR
Adjustment Item Problem / Option Button to Press
Advanced option
IR control
Select the operation mode of the remote control when multiple
monitors are connected via an RS232C connection.
Primary Set the monitor as the primary monitor for
remote control operation.
Secondary
Set the monitor as the secondary monitor. This
monitor can not be operated by the remote
control, and will only receive the control signal
from the primary monitor via the RS232C
connection.
Lock All
*1 To unlock, press and hold the INFO button on the remote control for 6 seconds.
*2 To unlock, hold the + button and button on the monitor for more than 3 seconds, it will lock/
unlock the control button function.
Power LED light The Power Indicator is turned On.
On
O ThePowerIndicatoristurnedO.
Keyboard control
Lockthekeyboardfunction.(Controlbuttons)
Power LED Light
Keyboard control
Off timer
Tiling
Schedule
Language
Picture
Screen
Audio
Configuration1
IR control
Action
Action
Configuration2
Advanced option
English
On
Unlock
Off
Unlock
OSD transparency
Power Save Mode1
Off
HDMI with One Wire Off
HDMI with One Wire Power Off Off
Auto signal detection Action
Lock all but Volume
Lock all but Power
Lock all except
PWR & VOL
Unlock*1
Lock all of the remote control.
Unlock the remote control.
Lock all except the volume of the remote control.
Lock all except the power of the remote control.
Lock all except the volume and power of the
remote control.
Lock All
Lock all but Volume
Lock all but Power
Lock all except
PWR & VOL
Unlock*2
Lock all of the keyboard.
Unlock the keyboard.
Lock all except the volume of the keyboard.
Lock all except the power of the keyboard.
Lock all except the volume and power of the
keyboard.
ENGLISH
OPERATING THE MONITOR 35
Adjustment Item Problem / Option Button to Press
Advanced option
Power LED Light
Keyboard control
Off timer
Tiling
Schedule
Language
Picture
Screen
Audio
Configuration1
IR control
Action
Action
Configuration2
Advanced option
English
On
Unlock
Off
Unlock
OSD transparency
Power Save Mode1
Off
HDMI with One Wire Off
HDMI with One Wire Power Off Off
Auto signal detection Action
H monitors
Tiling *3
Position
Sets the number of monitors used in the
horizontal position.
Frame comp.
The monitor will apply the settings in "H monitors",
"V monitors", "Position" and "Frame comp.".
O Enable isturnedo.
On
O
On
Enable
V monitors Sets the number of monitors used in the
vertical position.
Sets the position of the screen matrix.*4
Frame comp. isturnedo.
The monitor will adjust the image to compensate
for the width of the monitor bezels in order to
accurately display the image.
*3 With this function you can create a single large-screen matrix (video wall) that consists of up
to 100 sets of this monitor (up to 10-sets on the vertical and 10-sets on the horizontal sides).
However, the image quality may be degraded, display speed may be slowed down, or noise may
occur and pictures may not be displayed correctly. It is recommended that the screen matrix be
settoamaximumof5x5screencongurations(25monitors).
*4 Screen Matrix
Example:2x2screenmatrix(4monitors)
H monitors = 2 monitors
V monitors = 2 monitors
Example:5x5screenmatrix(25monitors)
H monitors = 5 monitors
V monitors = 5 monitors
12
34
H monitors
V monitors
Position
12
67
34
89
5
10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
H monitors
V monitors
Position
Switch on
delay
Adjustthepower-ondelayingtime(inseconds)allows
a sequential powering-on for each monitor by their ID
number when multiple monitors are connected.
O(0)/Auto(1-255)seconds
ENGLISH
36 OPERATING THE MONITOR
Adjustment Item Problem / Option Button to Press
Advanced option
Schedule
Schedule
1/2/3/4/
5/6/7 Input
Select default input source to use when the
monitor is automatically turned on next time.
HDMI1 / HDMI2 / HDMI3 / DVI-I /
DisplayPort / VGA / SDM*5 / Media Player /
Browser / iiSignage / PDF Player / Custom
Playlist
1/2/3/4/5/6/7
Chooseplaylist(1-7)forthemediaplayer,
PDF player and browser.
Days of
the week
Set the day of the week.
Sun / Mon / Tue / Wed / Thu / Fri / Sat
Every week
Back
Save Save schedule data.
Does not change schedule data.
Schedule list Up to 7 schedules can be set.
Enable
Enable / disable schedule.
NOTE
Ifsetwithotherschedulelistconict,you
can not enable schedule.
Start time
End time
Set start time.
Set end time.
*5 It can be used only when SDM-L is installed.
*6 The display detects and select available signal source automatically.
*7 Order of detection: HDMI1 HDMI2 HDMI3 DP OPS Media Player Browser
iiSignage PDF Player Custom
Set whether to repeat every week.
OTimer Setwhenturnothemonitor.
O/1-24hours
Power LED Light
Keyboard control
Off timer
Tiling
Schedule
Language
Picture
Screen
Audio
Configuration1
IR control
Action
Action
Configuration2
Advanced option
English
On
Unlock
Off
Unlock
OSD transparency
Power Save Mode1
Off
HDMI with One Wire Off
HDMI with One Wire Power Off Off
Auto signal detection Action
HDMI with One Wire
HDMI with One Wire
PowerO
O
On
HDMIwithOneWireisturnedo.
Control all devices connected by HDMI cable with one
remote control.
O
On
HDMIwithOneWirePowerOisturnedo.
Use the power button on the device connected with the
HDMI cable to switch to standby mode.
Auto signal detection *
6
O
All *7
Disable the Auto signal detection.
Detects all sources automatically if there is no signal on the
default input and selects the available signal automatically.
Failover Detectssourcesautomaticallywithuser-denedorder
if there is no signal on the default input and selects the
available signal automatically.
ENGLISH
OPERATING THE MONITOR 37
English
Deutsch
English
German
Français French
Russian
Polski Polish
SpanishEspañol
Italian Italiano
Dutch Nederlands
Language
OSD Transparency The background of OSD is made transparent.
O/1-100
SimpliedChinese
Turkish Türkçe
Traditional Chinese
Japanese
PortuguesePortuguês
Arabic
DanishDansk
SwedishSvenska
FinnishSuomalainen
NorwegianNorsk
Adjustment Item Problem / Option Button to Press
Advanced option
Power Save
Mode1
Mode2
Mode3
Mode4
Advanced option
reset Advanced option setting will be restored except "Date and
Time" in the Advanced option menu to factory-preset data.
Powerbuttono
No signal WOL Android
DCo DCo On ARMo
ARMo
ARMo
O
O
Backlighto
Backlighto
Backlighto
Backlight on, show "no
signal"
Schedule
Language
Picture
Screen
Audio
Configuration1
Action
Configuration2
Advanced option
English
OSD transparency
Power Save Mode1
Advanced option reset Action
Off
SDM settings Auto
HDMI with One Wire Off
HDMI with One Wire Power Off Off
Auto signal detection Action
Off timer Off
Tiling Action
Cancel
Reset
Return to Menu.
Not available on this model.
SDM settings*8
Auto
Alwayso
Always on
When turning on the display power and switching input
source to SDM, SDM power is automatically turned on.
SDMisalwaysturnedO.
SDM is always turned On.
*8 When"Powersave"issettoMode3orMode4,thebacklightturnsobutSDMkeepsonstate.
ENGLISH
38 OPERATING THE MONITOR
APPLICATION
Press the HOME button and number 1668 on the remote control.
or
ENGLISH
OPERATING THE MONITOR 39
Adjustment Item Problem / Option
Network
General
settings
<Settings>
Set the wired network.
Disable/Enable(ConnectionType:DHCP/StaticIP/IP
Address/Netmask/DNSAddress/Gateway,MACAddress)
Signage Display
Signage Display
name
Set the monitor name Ethernet Mac
Address.
Boot Logo*1Select Boot Animation*2
Screenshot
Disable/Enable(Interval,Starttime,End
time, Repeat, Save to, Purge Screenshots,
Sendscreenshotsviaemail)
Server
settings
Email
Notication
Disable/Enable(SMTP,ManagerEmail,
Test)
FTP Disable/Enable(Account,Password,
StoragePath,Port)
Platform Web
API Disable/Enable(Platform Web API)
Source
settings
Media Player EditMediaPlayerplaylistandeect
settings.
Browser EditBookmarkcongration.
iiSignage*3Set the iiSignage.
PDF Player EditPDFPlayerplaylistandeectsettings.
Custom app Edit the Custom app.
*1 The Boot Logo is only available when you select “User” of Logo function in the OSD menu
"Conguration2".
*2 For details, refer to download the Custom Boot Animation manual on the IIYAMA web site.
*3 For details, refer to download the iiSignage manual on the IIYAMA web site.
Settings
Signage Display
Network
Display
Apps
Security
System
Proxy
Set the proxy server.
Disable/Enable(Hostname:Proxyserver
IP Adress, Port: Proxy server port number,
Type:Proxyservertype)
Network
application
OTSP Network
Port Change the OTSP Network Port.
Ethernet
ENGLISH
40 OPERATING THE MONITOR
External
Storage
Disable
Enable
SD card / USB External Storage
unlock.
SD card / USB External Storage
lock.
Save: Save
Forget: Delete
Discard: Discard
Cancel: Close without saving
Adjustment Item Problem / Option
Clear Storage
System
Tools
Clear all data in signage folders.
All / Internal storage / USB storage / SD card
Factory Reset
Export to signage folder under USB/SD.
USB storage / SD card
Export signage
Display settings
Clone Media
File
Copythemedialefrominternal,USBorSD
folder.
Cancel
OK
Return to Menu.
Factory-preset data is restored.
Import signage
Display settings
Import from signage folder under USB/SD.
USB storage / SD card
Display Set the font size.
Apps Display applications information.
Security Display credential storage information.
Developer
options
When you change the system settings, a problem like
system instability may occur. In that case, contact your
dealer or iiyama service center for assistance.
About
Main info in About: System updates / Android version /
Kernel version / Build number
Automatically search update .zip from USB or SD card.
Whenyouselecttheupdated.ziple,themonitor will
restart and the update will start.
Settings
Signage Display
Network
Display
Apps
Security
System
Quick Info
Press the Info button and number 77 on the remote control.
Display the Network and Monitor etc. information.
Date & Time Display Date & Time information.
Signage Display
System
updates Local update
System
Firmware update.
ENGLISH
OPERATING THE MONITOR 41
<Android> * Android upgrade is not available on this model.
• Settings : Go to settings app.
•Apps:Showallapps.(Browser/Chromium/iiSignage/File Manager/Media Player/PDF player/
Settings)
• Network : Set Ethernet.
• Storage : Display current Android storage information.
Preparation for using Media Player and PDF Player
InordertousetheMediaPlayeryouneedtosavetheleinanspeciclefolderonyourUSBor
SD card.
1.Createafoldercalled"signage"onyourUSBorSDcard,createasubfolders(video/photo/
music/pdf)inthatfolder.
-videos in /signage/video/
-photos in /signage/photo/
-music in /signage/music/
-pdfs in /signage/pdf/
2.SavetheVideo/Photo/Music/PDFlesinthesubfoldersofyourUSBorSDcard.
3. Insert your USB or SD card into an USB port or SD card slot of the monitor.
4.Whenusinginternalstorage,savethenecessarylesofyourUSBorSDcardtoanappropriate
signage folder and subfolders in the internal storage of the monitor.
-videos in /signage/video/
-photos in /signage/photo/
-music in /signage/music/
-pdfs in /signage/pdf/
Make sure you select the right folder.
Ifyousavetheleinthewrongfolder,youmaynotndit.
Slide bar
• Open:Openfolder(USB/SDcard)
• Delete:Deleteles.
• Copy:Copyles.
• Move:Moveles.
• Select:Selectles.
• Select All: Selectallles.
Supportedlesystem:
FAT32
Supportedleformat:
• Music: MP3, WMA, WMA pro, M4A, AAC, LPCM
• Video: AVI, MP4, 3GPP, MKV, ASF, VRO VOB, PS, TS
• Photo: JPEG, BMP, PNG, GIF
NOTE
ENGLISH
42 OPERATING THE MONITOR
[Media Player]
· Play: Select playlist to play
· Compose: Edit playlist
· Settings: Setting play properties
Compose
1. Select "Compose" on the page. First you select one playlist to play between FILE1 and
FILE7.
2.Selecttheleandselecteditordelete.
3.Savetheeditedle.
-videos in /signage/video/
-photos in /signage/photo/
-music in /signage/music/
4. When you create photo list you will be asked if you want to play back ground music during
slideshow playback. Set as required.
Slide bar
• Source:Selectstorage(USB/SDcard)
• Playlist:Showplaylist(Internal)
• Select all:Selectallstorageles.
• Delete all:Deleteplaylistles.
• Add/Remove: Update playlist from the source.
• Sort: Sort playlist.
• Save/Abort: Save or abort playlist.
• Back: Return.
Remote control
• Option key: Display slidebar
•
Play key: Playmediale
•
Pause key: Pause
• Info key: Show media info
• OK key: Select/deselectle
Play
Select "Play" on the page. First you select one playlist to play between FILE1 and FILE7.
Media Hotkey
• Play:Toplaythemediale.
• Pause:Topausethemediale.
• Fast forward: To skip forward 20 seconds.
• Rewind: To skip backward 20 seconds.
• Stop:Tostopthemediale.Ifitisagifle,itwillpause.
ENGLISH
OPERATING THE MONITOR 43
Settings
Select "Settings" on the page.
• Repeat mode: Play mode.
Repeatonce:Alllesarerepeatedonce.
Repeatall:Alllesinthesamefolderplayrepeatedly.
• Slideshow Eect:Photoslideshoweect.
Right to left: Change from right to left sliding.
Fold: Change by rotating horizontally in the center.
Corner: Change by enlarging from the upper left corner to the lower right
corner.
None: Normal
• Eect Duration:Photoeectduration.5s/10s/15s/20s
[Browser]
Settings
Select "Settings" on the page.
• Set frequently used URL.
1. Select 1 - 7.
2. Enter URL and press OK.
3. Press 'Option' to display the slide bar.
Import:ImportURLlistle
Export:ExportURLlistle
Delete all: Delete all URL record
Back: Slide bar will be closed
ENGLISH
44 OPERATING THE MONITOR
[PDF Player]
Compose
1. Select "Compose" on the page. First you select one playlist to play between FILE1 and
FILE7.
2.Selecttheleandselecteditordelete.
3.Savetheeditedle.
-pdfs in /signage/pdf/
Slide bar
• Source:Selectstorage(USB/SDcard)
• Playlist:Showplaylist(Internal)
• Select all:Selectallstorageles.
• Delete all:Deleteplaylistles.
• Add/Remove: Update playlist from source.
• Sort: Sort playlist.
• Save/Abort: Save or abort playlist.
• Back: Return.
Remote control
• Option key: Display slidebar
•
Play key: Playmediale
• Info key: Show media info
• OK key: Select/deselectle
Play
Select "Play" on the page. First you select one playlist to play between FILE1 and FILE7.
Media Hotkey
• Play:ToplaythePDFle.
• Pause:TopausethePDFle.
• Fast forward:Gotothenextpage,ifthepageisendofthele,itwillgotonextle.
• Rewind:Backtopreviouspage,ifthepageisrstofthele,itwillbacktopreviousle.
• Stop:Returntorstpageofle.
Color Hotkey
• Blue key:Zoomin(+10%)
• Yellow key:Zoomout(-10%)
• OK key: Restore zoom
Arrow key
• / / / :Adjustpage(Whenthepagehaszoomedin/out)
• :Previouspage(Whenthepagehasnotzoomedin/out)
• :Nextpage(Whenthapagehasnotzoomedin/out)
Settings
Select "Settings" on the page.
• Repeat mode: Play mode.
Repeatonce:Alllesarerepeatedonce.
Repeatall:Alllesinthesamefolderplayrepeatedly.
• Eect Duration:PDFeectduration.5s/10s/15s/20s
ENGLISH
OPERATING THE MONITOR 45
NOTE
[iiSignage]
SettheServer/Account/PINcode/Version(Ver.2/Ver.3)*/Content(Internalstorage/USBstorage/SD
card).
* When Ver.2, Server/Account/PIN code will turn to gray to indicate it is not available on this model.
When Ver.3, Server/Account/PIN code is available.
To be able to use the functionality , please download the iiSignage Software and User Manual from
our Website https://iiyama.com/iisignage
iiSignage software is using the network Port: 9989 , future information are available in the
iiSignage User Manual
[Chromium]
Connect the network, and browse the web.
[File Manager]
Browsethelesstoredintheinternalstorage,USBandSDcard.
[Settings]
See page 39,40 for Settings.
[Custom]
Set up the application for Customer Source.
• Only display user installed app.
• Will not appear in the system pre-install app.
ENGLISH
46 OPERATING THE MONITOR
SCREEN ADJUSTMENTS
The screen adjustments described in this manual are designed to set image position and minimize
ickerorblurfortheparticularcomputerinuse.
The monitor is designed to provide the best performance at resolution of 3840 × 2160, but can not
provide the best at resolutions of less than 3840 × 2160 because the picture is automatically stretched
totthefullscreen.Itisrecommendedtooperateatresolutionof3840×2160innormaluse.
Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to
the screen enlargement process.
It is preferable to adjust the image position and frequency with the monitor controls, rather than
the computer software or utilities.
Perform adjustments after a warm-up period of at least thirty minutes.
Additional adjustments may be required after the Auto Adjust depending on the resolution or
signal timing.
The Auto Adjust may not work correctly when displaying the picture other than the screen
adjustment pattern. In this case, manual adjustments are required.
There are two ways to adjust the screen. One way is automatic adjustment for Position, Clock and
Phase. The other way is performing each adjustment manually.
Perform theAutoAdjust rst when the monitor is connected to a new computer, or resolution is
changed. If the screen has a flicker or blur, or the picture does not fit in the display area after
performing the Auto Adjust, manual adjustments are required. Both adjustments should be made by
usingthescreenadjustmentpattern(Test.bmp)obtainedviatheIIYAMAwebsite(http://www.iiyama.
com).
Adjust the image by following the procedure below to get the desired picture.
This manual explains adjustment under Windows® OS.
Display the picture at the optimum resolution.
Enter the Test.bmp (screen adjustment pattern) to wallpaper.
Consult the appropriate documentation for doing this.
Set the display position to center in the wallpaper setting dialogue box.
[Adjustment pattern]
Zebra pattern
Color bar
Picture frame
NOTE
Adjust the image by following the procedure below to get the desired picture when selecting Analog input.
ENGLISH
OPERATING THE MONITOR 47
1) Adjust the H.Position so that the left side of the picture frame will move to the left edge
of the display area.
When the left side of the picture frame moves apart from the left edge of the display
areaduringtheClockadjustment,adjuststeps1)and2).
Another way to make the Clock adjustment is to correct the vertical wavy lines in the
zebra pattern.
ThepicturemayickerduringtheClock,H.PositionandV.Positionadjustment.
In case the picture frame is bigger or smaller than the data display area after the
Pixel Clock adjustment, repeat steps from .
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the Clock.
Adjust the Auto Adjustment. (Auto Adjust)
Adjust the image manually by following procedure below when the screen has a icker or
blur, or the picture does not t in the display area after performing the Auto Adjust.
Adjust the V.Position so that the top and bottom of the picture frame will t to the display
area.
NOTE
ENGLISH
48 OPERATING THE MONITOR
Adjust the Brightness and Color to get the desired picture after you complete the Clock
and Phase adjustments.
Put back your favorite wallpaper.
Adjust the Phase to correct horizontal wavy noise, icker or blur in the zebra pattern.
NOTE Incasethestrongickerorblursremainonapartofthescreen,repeatsteps and
because the Clock may not be adjusted correctly.
Adjust the H.Position after the Phase adjustment if the horizontal position moves
during the adjustment.
ENGLISH
OPERATING THE MONITOR 49
* USB peripherals and audio equipment are not connected.
00.5 W100%
POWER
CONSUMPTION
Green
Red
Power Indicator
NORMAL MODE
STANDBY MODE
*
Evenwhenusingthestandbymode,themonitorconsumeselectricity.TurnothePower
Switch whenever the monitor is not in use, during the night and weekends, to avoid
unnecessary power consumption.
NOTE
STANDBY FEATURE
Standby Mode
When the video signal from the computer is o, the monitor enters into Standby Mode which
reduces the power consumption to less than 0.5W*. The screen becomes dark, and the power
indicator turns to red. From Standby Mode, the image reappears in several seconds when either
the keyboard or the mouse are touched again.
The standby feature of this product complies with power saving requirement of VESA DPMS. When
activated, it automatically reduces unnecessary power consumption of the monitor when your
computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There
is a standby step the monitor takes as described below. The standby function, including any timer
settingsisconguredbytheoperatingsystem.Checkyouroperatingsystemmanualforinformation
onhowthiscanbecongured.
ENGLISH
50 TROUBLE SHOOTING
TROUBLE SHOOTING
Problem Check
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem
you have. If the monitor does not get a picture, skip to 2.
2.ConsultthefollowingitemsifyoucannotndanappropriateadjustmentiteminOPERATINGTHE
MONITOR or if the problem persists.
3.
If you are experiencing a problem which is not described below or you cannot correct the problem,
discontinue using the
monitor
and contact your dealer or iiyama service center for further assistance.
The screen is not
synchronized.
The Signal Cable is properly connected.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
The picture does
not appear.
ThePowerCableisrmlyseatedinthesocket.
The Power Switch is turned ON.
The AC socket is live. Please check with another piece of equipment.
If the blank screen saver is in active mode, touch the keyboard or the mouse.
Increase the Contrast and/or Brightness.
The computer is ON.
The Signal Cable is properly connected.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
If the monitor is in standby mode, touch the keyboard or the mouse.
The computer is ON.
The Signal Cable is properly connected.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
The screen
position is not in
the center.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
The screen is too
bright or too dark.
The screen is
shaking.
The video output level of the computer is within the specication of the
monitor.
Thepowervoltageiswithinthespecicationofthemonitor.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
No sound.
Theaudioequipment(computeretc.)isON.
The Audio Cable is properly connected.
The Volume is turned up.
The Mute is OFF.
Theaudiooutputleveloftheaudioequipmentiswithinthespecicationof
the monitor.
The sound is too
loud or too quiet.
Theaudiooutputleveloftheaudioequipmentiswithinthespecicationof
the monitor.
A strange noise is
heard.
The Audio Cable is properly connected.
(Powerindicator
isred.)
(Powerindicator
isgreen.)
(Powerindicator
doesnotlightup.)
ENGLISH
RECYCLING INFORMATION 51
For better environment protection please don't dispose your monitor.
Please visit our web site: www.iiyama.com for monitor recycling.
RECYCLING INFORMATION
ENGLISH
52 APPENDIX
APPENDIX
Designandspecicationsaresubjecttochangewithoutpriornotice.
SPECIFICATIONS : ProLite LH6542UHS-B3
* USB peripherals and audio equipment are not connected.
NOTE
Size Category 65"
LCD
Panel
Panel technology
IPS
Size Diagonal:64.5"(164cm)
Pixel pitch 0.372mm H × 0.372mm V
Brightness 500cd/m2(Typical)
Contrast ratio 1300:1(Typical)
Viewable angle Horizontal:178degrees,Vertical:178degrees(Typical)
Response time 9ms(Typical,GraytoGray)
Display Colors Approx.1.07 Billion
Sync Frequency DVI: Horizontal: 30.0-80.0kHz, Vertical: 50-75Hz
HDMI/DisplayPort: Horizontal: 30.0-135.0kHz, Vertical: 50-75Hz
Native Resolution 3840 × 2160, 8.3 MegaPixels
Support Max. Resolution DVI: 1920 × 1080 60Hz
HDMI/DisplayPort: 3840 × 2160 60Hz
Input Connector DVI-I, HDMI × 3, DisplayPort
Input Audio Connector ø3.5mmminijack(Stereo)
LAN RJ45
Serial Port RS-232C In/Out ø 2.5mm sub-mini jack
Plug & Play VESA DDC2BTM
Input Video Signal Digital:DVI(DigitalVisualInterfaceStandardRev.1.0)compliance
Digital: HDMI, DisplayPort
Input Audio Signal 0.5Vrms maximum
IR Extender Connector
IR In/Out
USB Connector
USB2.0(DC5V,500mA)(USBMediaPlayer)×2
Micro SD card slot Micro SD
Output Connector DisplayPort
Speakers Internal:10W×2(Stereospeakers)
Maximum Screen Size 1428.48mm W × 803.52mm H / 56.2" W × 31.6" H
Power Source 100-240VAC, 50/60Hz, 4A
Power Consumption* 183W typical, Standby mode: 0.5W maximum
Dimensions / Net Weight 1462.5×837.5×93.5mm/57.6×33.0×3.7"(W×H×D)
27.8kg / 61.2lbs
Environmental
Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
0 to 40°C / 32 to 104°F
20to80%(Nocondensation)
-20 to 60°C / 4 to 140°F
5to95%(Nocondensation)
Approvals CE, UKCA, EAC, TÜV-Bauart
ENGLISH
APPENDIX 53
SPECIFICATIONS : ProLite LH7542UHS-B3
* USB peripherals and audio equipment are not connected.
NOTE
Size Category 75"
LCD
Panel
Panel technology
IPS
Size Diagonal:74.5"(189cm)
Pixel pitch 0.429mm H × 0.429mm V
Brightness 500cd/m2(Typical)
Contrast ratio 1400:1(Typical)
Viewable angle Horizontal:178degrees,Vertical:178degrees(Typical)
Response time 8ms(Typical,GraytoGray)
Display Colors Approx.1.07 Billion
Sync Frequency DVI: Horizontal: 30.0-80.0kHz, Vertical: 50-75Hz
HDMI/DisplayPort: Horizontal: 30.0-135.0kHz, Vertical: 50-75Hz
Native Resolution 3840 × 2160, 8.3 MegaPixels
Support Max. Resolution DVI: 1920 × 1080 60Hz
HDMI/DisplayPort: 3840 × 2160 60Hz
Input Connector DVI-I, HDMI × 3, DisplayPort
Input Audio Connector ø3.5mmminijack(Stereo)
LAN RJ45
Serial Port RS-232C In/Out ø 2.5mm sub-mini jack
Plug & Play VESA DDC2BTM
Input Video Signal Digital:DVI(DigitalVisualInterfaceStandardRev.1.0)compliance
Digital: HDMI, DisplayPort
Input Audio Signal 0.5Vrms maximum
IR Extender Connector
IR In/Out
USB Connector
USB2.0(DC5V,500mA)(USBMediaPlayer)×2
Micro SD card slot Micro SD
Output Connector DisplayPort
Speakers Internal:10W×2(Stereospeakers)
Maximum Screen Size 1649.6mm W × 927.9mm H / 64.9" W × 36.5" H
Power Source 100-240VAC, 50/60Hz, 4.1A
Power Consumption* 255W typical, Stnadby mode: 0.5W maximum
Dimensions / Net Weight 1683.5×961.5×95.5mm/66.3×37.9×3.7"(W×H×D)
36.8kg / 81.1lbs
Environmental
Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
0 to 40°C / 32 to 104°F
20to80%(Nocondensation)
-20 to 60°C / 4 to 140°F
5to95%(Nocondensation)
Approvals CE, UKCA, EAC, TÜV-Bauart
ENGLISH
54 APPENDIX
SPECIFICATIONS : ProLite LH8642UHS-B3
* USB peripherals and audio equipment are not connected.NOTE
Size Category 86"
LCD
Panel
Panel technology
IPS
Size Diagonal:85.6"(217cm)
Pixel pitch 0.4935mm H × 0.4935mm V
Brightness 500cd/m2(Typical)
Contrast ratio 1200:1(Typical)
Viewable angle Horizontal:178degrees,Vertical:178degrees(Typical)
Response time 8ms(Typical,GraytoGray)
Display Colors Approx.1.07 Billion
Sync Frequency DVI: Horizontal: 30.0-80.0kHz, Vertical: 50-75Hz
HDMI/DisplayPort: Horizontal: 30.0-135.0kHz, Vertical: 50-75Hz
Native Resolution 3840 × 2160, 8.3 MegaPixels
Support Max. Resolution DVI: 1920 × 1080 60Hz
HDMI/DisplayPort: 3840 × 2160 60Hz
Input Connector DVI-I, HDMI × 3, DisplayPort
Input Audio Connector ø3.5mmminijack(Stereo)
LAN RJ45
Serial Port RS-232C In/Out ø 2.5mm sub-mini jack
Plug & Play VESA DDC2BTM
Input Video Signal Digital:DVI(DigitalVisualInterfaceStandardRev.1.0)compliance
Digital: HDMI, DisplayPort
Input Audio Signal 0.5Vrms maximum
IR Extender Connector
IR In/Out
USB Connector
USB2.0(DC5V,500mA)(USBMediaPlayer)×2
Micro SD card slot Micro SD
Output Connector DisplayPort
Speakers Internal:10W×2(Stereospeakers)
Maximum Screen Size 1895.0mm W × 1066.9mm H / 74.6" W × 42.0" H
Power Source 100-240VAC, 50/60Hz, 7A
Power Consumption* 444W typical, Standby mode: 0.5W maximum
Dimensions / Net Weight 1929.0×1100.0×95.5mm/75.9×43.3×3.7"(W×H×D)
49.5kg / 109.1lbs
Environmental
Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
0 to 40°C / 32 to 104°F
20to80%(Nocondensation)
-20 to 60°C / 4 to 140°F
5to95%(Nocondensation)
Approvals CE, UKCA, EAC, TÜV-Bauart
ENGLISH
APPENDIX 55
DIMENSIONS : ProLite LH6542UHS
1432.5mm/56.4”
93.5mm/3.7”
418.5mm/16.5”
1462.5mm/57.6”
807.5mm/31.8”
837.5mm/33.0”
581.0mm/22.9”
50.5mm/2.0”
69.0mm/2.7”
1062.0mm/41.8”
400.0mm/15.7”
200.0mm/7.8”
400.0mm/15.7”
4xM8 SCREW HOLE
(VESA MOUNT)
106.0mm/4.2”
51.5mm/2.0”
DIMENSIONS : ProLite LH7542UHS
1653.5mm/65.1”
481.0mm/18.9”
1683.5mm/66.3”
932.0mm/36.7”
961.5mm/37.9”
534.0mm/21.0”
1360.0mm/53.5”
52.5mm/2.0”
69.5mm/2.7”
95.5mm/3.7”
200.0mm/7.8”
600.0mm/23.6”
400.0mm/15.7”
4xM8 SCREW HOLE
(VESA MOUNT)
97.0mm/3.8”
57.0mm/2.2”
ENGLISH
56 APPENDIX
COMPLIANT TIMING
M250A22
DIMENSIONS : ProLite LH8642UHS
550.0mm/21.7”
1929.0mm/75.9”
1898.0mm/74.7”
1069.0mm/42.1”
1100.0mm/43.3”
534.0mm/21.0”
1360.0mm/53.5”
52.5mm/2.0”
69.5mm/2.7”
95.5mm/3.7”
200.0mm/7.8”
600.0mm/23.6”
400.0mm/15.7”
4xM8 SCREW HOLE
(VESA MOUNT)
94.5mm/3.7”
82.0mm/3.2”
* means supported the timing.
Timing
VESA
VGA 640x480 31.5 60.0 25.175
SVGA 800x600 37.9 60.0 40.000
XGA 1024x768 48.4 60.0 65.000
WXGA 1280x768 47.8 60.0 79.500
QVGA 1280x960 60.0 60.0 108.000
SXGA 1280x1024 64.0 60.0 108.000
HD FWXGA 1366x768 47.7 60.0 85.500
CVT 1400x900 55.9 60.0 106.500
WSXGA 1680x1050 65.3 60.0 146.250
FHD 1920x1080 67.5 60.0 148.500
4K 3840x2160 67.5 30.0 297.000
135.0 60.0 594.000
IBM 720x400 31.5 70.0 28.320
SD
NTSC-M 15.7 60.0 13.500
NTSC-J 15.7 60.0 13.500
PAL-BDGHI 15.7 60.0 13.500
480i 60Hz 15.7 60.0 13.500
576i 50Hz 15.6 50.0 13.500
480p 60Hz 31.5 60.0 27.000
576p 50Hz 31.3 50.0 27.000
HD
720p 50Hz 37.5 50.0 74.250
60Hz 45.0 60.0 74.250
1080i 50Hz 28.1 50.0 74.250
60Hz 33.8 60.0 74.250
1080p 50Hz 56.3 50.0 148.500
60Hz 67.5 60.0 148.500
fH(kHz)
fV(Hz)
Dot clock
(MHz)
HDMI1
DVI
HDMI2
DisplayPort
HDMI3
VGA(viaDVI)