iiyama T5561UHSC-B1 User Manual
Displayed below is the user manual for T5561UHSC-B1 by iiyama which is a product in the Signage Displays category. This manual has pages.
Related Manuals
ENGLISH
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes
to read this comprehensive manual carefully
before installing and switching on the monitor.
Please keep this manual in a safe place for
your future reference.
USER MANUAL
ENGLISH
Wereservetherighttochangespecicationswithoutnotice.
All trademarks used in this user manual are the property of their respective owners.
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the
address: http://www.iiyama.com
YoucanaccesstheWebpageofdierentcountriesfromthere.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC
Directive”, 2014/35/EU “Low Voltage Directive” and 2011/65/EU “RoHS Directive”.
Warning
This is a class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PLT5561M / PLT4361M
ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................ 1
SAFETY PRECAUTIONS................................................................1
SPECIAL NOTES ON LCD MONITORS .........................................3
CUSTOMER SERVICE ...................................................................5
CLEANING ......................................................................................5
BEFORE YOU OPERATE THE MONITOR ..........................................6
FEATURES......................................................................................6
CHECKING THE CONTENTS OF THE PACKAGE ........................6
SPECIAL NOTES ON THE TOUCH PANEL ...................................7
INSTALLATION ...............................................................................8
CONTROLS AND CONNECTORS : MONITOR ..............................9
CONNECTING YOUR MONITOR : ProLite T5561UHSC .............12
CONNECTING YOUR MONITOR : ProLite T4361MSC ...............13
FITTING AND REMOVAL OF CABLE COVER .............................14
COMPUTER SETTING .................................................................15
OPERATING THE MONITOR .............................................................17
ADJUSTMENT MENU CONTENTS ..............................................19
SCREEN ADJUSTMENTS ............................................................24
POWER MANAGEMENT FEATURE .............................................27
TROUBLE SHOOTING ......................................................................28
RECYCLING INFORMATION .............................................................29
APPENDIX ........................................................................................30
SPECIFICATIONS : ProLite T5561UHSC .....................................30
SPECIFICATIONS : ProLite T4361MSC .......................................31
DIMENSIONS : ProLite T5561UHSC ............................................32
DIMENSIONS : ProLite T4361MSC ..............................................32
COMPLIANT TIMING ....................................................................33
ENGLISH
FOR YOUR SAFETY 1
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the
monitor and contact your dealer or iiyama service center immediately. Further use may be
dangerousandcancausereorelectricshock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
reorelectricshock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
anyobjectinsidemaycausere,electricshockordamage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Donotusewherewatermaybesplashedorspiltontothemonitorasitmaycausereorelectric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Besuretooperatethemonitoronlywiththespeciedpowersupply.Useofanincorrectvoltagewill
causemalfunctionandmaycausereorelectricshock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objectsonthecables.Ifdamaged,thecablesmaycausereorelectricshock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS
ENGLISH
2 FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or
smokyareasasitmaycausere,electricshockordamage.Youshouldalsoavoidareaswherethe
sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not
pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
re.Toallowadequateaircirculation,placethemonitoratleast10cm(or4inches)fromanywalls.
Operating the monitor on its back, side, upside down or on a carpet or any other soft material may
also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
Whenyoumovethemonitor,turnothepowerswitch,unplugthemonitorandbesurethesignal
cableisdisconnected.Ifyoudonotdisconnectthem,itmaycausereorelectricshock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to
avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable
itselfasthismaycausereorelectricshock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may
damage your computer.
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
Foroptimalviewingcomfort,themonitorshouldbejustbeloweyeleveland40-60cm(16-24inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
OTHERS
ENGLISH
FOR YOUR SAFETY 3
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE -WhenyourstturnontheLCDmonitor,thepicturemaynottinthedisplayarea
because of the type of computer that is used. In this case, adjust the picture position to
the correct position.
-Youmayndslightlyunevenbrightnessonthescreendependingonthedesktop
pattern you use.
- Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screenisrecoveredslowlybychangingtheimageorturningothePowerSwitchfor
hours.
SPECIAL NOTES ON LCD MONITORS
This LCD cannot be used outdoors.
If you use a cable longer than the supplied one, the picture quality is not guaranteed. Touch
function can be disrupted if the USB cable length exceeds 3m.
ENGLISH
4 FOR YOUR SAFETY
USAGE CONFIRMATION
This product is designed for optimum usage at 24hours per day.
The display is compatible for usage in Landscape/Portrait applications.
IMAGE PERSISTENCE / IMAGE STICKING
Please be aware that all LCD screens can experience Image Persistence or Image Sticking. This
occurs when a residual image remains visible on a screen when static images are displayed for long
periods of time. LCD Image Persistence is not permanent but constant images being displayed for a
long period of time should be avoided.
To counteract Image Persistence, turn off the monitor for as long as the previous image was
displayed, so if an image was on the monitor for 1 hour and there is evidence of a residual or “ghost”
image,youshouldturnothemonitorfor1hourinordertocleartheresidualimage.
For all LFD products, iiyama recommends displaying moving images and utilising a moving screen
saveratregularintervalswheneverthescreenisidle.Youcouldalsoturnothemonitorwhennot
in use to assist the prevention.
Other waystoreducetheriskofImagePersistencewillbetoutilisetheFAN-onfunction(if
available),LowBacklightandLowBrightnesssettings.
FOR EXTENDED USE AS A PUBLIC DISPLAY
Image Sticking on LCD Panel
When a static image is displayed for hours, an electric charge trace remains near the electrode
insidetheLCDproducinga“ghost”image.(ImagePersistence).
Image Persistence is not a permanent feature.
Recommendations
To prevent Image Sticking and promote longer life expectancy of display, we recommend the
following:
1. Avoid static images displayed for long periods – change static images on continuous loop.
2.Turnomonitorwhennotinuse,eitherbyremotecontrolorusePowerManagementorSchedule
functions.
3.Whenmonitorisinstalledinhighambienttemperatureenvironment(s)orinanenclosedposition,
utilise the Cooling Fan, Screen Saver and Low Brightness functions.
4. Suitable ventilation for any monitor is an expectation of any installation – climate control systems
may need to be employed.
5. We strongly recommend utilisation of active cooling with fans for long operation times or high
ambient temperature environments.
ENGLISH
FOR YOUR SAFETY 5
NOTE
If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
CUSTOMER SERVICE
CLEANING
WARNING
If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.
NOTE
To protect the Touch screen surface, do not scratch or rub the screen with a hard
object.
Never use any of the following strong solvents. These will damage the cabinet and
the Touch screen surface.
Abrasive cleaner Wax Solvent
Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
CABINET Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
TOUCH
SCREEN
Touch screen surface may be cleaned using a soft clean cloth moistened with mild
window glass commercial cleaners or 50/50 mixture of water and IPA(ISO-propyl-
alcohol). Don’tuse acidor alkalinesolvent toclean thesurface ofthe panel(or
screen).
ENGLISH
6 BEFORE YOU OPERATE THE MONITOR
The following accessories are included in your package. Check to see if they are enclosed with
the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional
iiyamaoce.
*1 The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used. However, all guarantees and warranties are void for any
problems or damage caused by a power cable not supplied by iiyama.
An approved power cable greater or equal to H05VVF, 3G, 0.75mm2 must be used.
*2 Accessory for ProLite T5561UHSC.
*3 Accessory for ProLite T4361MSC.
Power Cable*1
DVI-I-VGA Cable*2 VGA Cable*3
HDMI Cable USB Cable Audio Cable
Safety Guide Quick Start Guide
BEFORE YOU OPERATE THE MONITOR
CHECKING THE CONTENTS OF THE PACKAGE
CAUTION
FEATURES
Supports Resolutions up to 3840 × 2160 : ProLite T5561UHSC
Supports Resolutions up to 1920 × 1080 : ProLite T4361MSC
High Contrast 1100:1 (Typical) / Brightness 450cd/m2 (Typical: without Touch
panel) : ProLite T5561UHSC
High Contrast 4000:1 (Typical) / Brightness 400cd/m2 (Typical: without Touch
panel) : ProLite T4361MSC
Digital Character Smoothing
Automatic Set-up
Stereo Speakers
2 × 8W Stereo Speakers
Power Management (VESA DPMS Compliant)
VESA Mounting Standard (400mm×400mm) Compliant
IP65 Standard Compliant (Only front face)
Antingerprintnish
ENGLISH
BEFORE YOU OPERATE THE MONITOR 7
SPECIAL NOTES ON THE TOUCH PANEL
Permanent damage can occur if Sharp Edged, Pointed or Metal items are used to activate Touch.
This could invalidate any remaining warranty.
Werecommendyouuseastylus(tipR0.8orover)ornger.
CAUTION
ENGLISH
8 BEFORE YOU OPERATE THE MONITOR
INSTALLATION
CAUTION
Follow the manual instructions for the type of mount you have selected. Refer all servicing to
qualiedservicepersonnel.
Moving the monitor requires at least two people.
Before installing, please make sure the wall is strong enough to hold the necessary weight of the
display and the mount.
[WALL MOUNTING]
When using the wall mounting, consideration of thickness of the mounting stage needs to be taken.
Tighten the M6 Screw with washer which “L” length is 20mm to fasten the monitor. Using a screw
longer than this may cause electric shock or damage because it may contact with the electrical parts
inside the monitor.
CAUTION
[ROTATING THE DISPLAY]
It is designed to be compatible in both landscape and portrait modes.
A
A
Not Available
A
A
Landscape
Portrait
Available
L
Mounting Stage Screw
Chassis
ENGLISH
BEFORE YOU OPERATE THE MONITOR 9
CONTROLS AND CONNECTORS : MONITOR
<Front>
ENGLISH
10 BEFORE YOU OPERATE THE MONITOR
●ProLIte T5561UHSC <Back>
Remote Control
Touch V01*1
MENU Menu Button
Scroll Up / Brightness Button
Scroll Down / Mute Button
SELECT Select / Auto Button
Power Button
DVI DVI-I DVI-I Connector
HDMI2 HDMI HDMI Connector
HDMI1 HDMI HDMI Connector
DP DisplayPort DisplayPort Connector
AUDIO-IN Mini Jack Audio Connector
AUDIO-OUT Mini Jack Audio Connector
RJ11*1RJ11 Remote Control Touch V01 Connector
USB USB Touch USB Connector
DC-OUT*2DC jack DC out connector( :Directcurrent)(DC-OUT)
AC-IN AC-INLET
ACConnector( :Alternatingcurrent)(AC-IN)
SPEAKERS Speakers
Option SDM slot*3Option SDM slot
*1 Remote Control Touch V01 is optional.
*2 DC-OUT may be unusable in some cases. Be sure to ask our service team for advice when you
use DC-OUT.
*3 Please contact the iiyama Support Centre in your country if you wish to use Option SDM.
ENGLISH
BEFORE YOU OPERATE THE MONITOR 11
<Back>
Remote Control
Touch V01*1
MENU Menu Button
Scroll Up / Brightness Button
Scroll Down / Mute Button
SELECT Select / Auto Button
Power Button
RJ11*1RJ11 Remote Control Touch V01 Connector
DP DisplayPort DisplayPort Connector
HDMI HDMI HDMI Connector
DVI DVI-D DVI-D Connector
VGA VGA VGA Connector
AUDIO-IN Mini Jack Audio Connector
USB USB Touch USB Connector
DC-OUT*2DC jack DC out connector( :Directcurrent)(DC-OUT)
AC-IN AC-INLET ACConnector( :Alternatingcurrent)(AC-IN)
SPEAKERS Speakers
Option SDM slot*3Option SDM slot
*1 Remote Control Touch V01 is optional.
*2 DC-OUT may be unusable in some cases. Be sure to ask our service team for advice when you
use DC-OUT.
*3 Please contact the iiyama Support Centre in your country if you wish to use Option SDM.
●ProLIte T4361MSC
ENGLISH
12 BEFORE YOU OPERATE THE MONITOR
CONNECTING YOUR MONITOR : ProLite T5561UHSC
Ensurethatboththecomputerandthemonitorareswitchedo.
Connect the computer to the monitor with the signal cable.
Connect the computer to the monitor with the USB Cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
ConnectthemonitorcabletotheRemoteControlTouchV01(option),ifnecessary.
ConnectthePowerCabletothemonitorrstandthentothepowersource.
Turn on your monitor and computer.
The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regionaliiyamaoce.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyamaoceforasuitableadaptor.
MakesureyoutightenthengerscrewsateachendoftheSignalCable.
When USB cable connected than wait for 8 seconds and the touch function is ready to
go.Itcanbeactivatedbypen,ngeroranyotherpointer.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing
loss.
[Example of Connection]
<Back>
NOTE
* DVI-D cable is not supplied with the monitor. If you use low quality DVI-D cable, it may cause a
result of electro-magnetic interference. Please contact the iiyama Support Centre in your country if
you wish to connect the monitor via the DVI-D input.
Computer
AV Equipment etc.
HDMI Cable (Accessory)
Power Cable (Accessory)
USB Cable (Accessory)
Audio Cable (Accessory)
DVI-I-VGA Cable (Accessory)*
DisplayPort Cable (Not Included)
Remote
Control
Touch V01
(option)
HDMI Cable (Not Included)
ENGLISH
BEFORE YOU OPERATE THE MONITOR 13
CONNECTING YOUR MONITOR : ProLite T4361MSC
Ensurethatboththecomputerandthemonitorareswitchedo.
Connect the computer to the monitor with the signal cable.
Connect the computer to the monitor with the USB Cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
ConnectthemonitorcabletotheRemoteControlTouchV01(option),ifnecessary.
ConnectthePowerCabletothemonitorrstandthentothepowersource.
Turn on your monitor and computer.
The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regionaliiyamaoce.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyamaoceforasuitableadaptor.
MakesureyoutightenthengerscrewsateachendoftheSignalCable.
When USB cable connected than wait for 8 seconds and the touch function is ready to
go.Itcanbeactivatedbypen,ngeroranyotherpointer.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
[Example of Connection]
<Back>
NOTE
* DVI-D cable is not supplied with the monitor. If you use low quality DVI-D cable, it may cause a
result of electro-magnetic interference. Please contact the iiyama Support Centre in your country if
you wish to connect the monitor via the DVI input.
Computer
AV Equipment etc. VGA Cable (Accessory)
HDMI Cable (Accessory)
Power Cable (Accessory)
USB Cable (Accessory)
Audio Cable (Accessory)
DVI-D Cable (Not Included)*
DisplayPort Cable (Not Included)
Remote
Control
Touch V01
(option)
ENGLISH
14 BEFORE YOU OPERATE THE MONITOR
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay
themonitoratonatablewithfrontfacedown.
FITTING AND REMOVAL OF CABLE COVER
Remove the screw of the cable cover and remove the cable cover from the monitor as shown in
Step 1.
When cables are connected as shown in Step 2-1, Step 2-2 or Step 2-3, place the cable cover and
xitrmlyusingascrew.
< Fitting >
< Removal >
Step 1
Cable Cover
Screw
Step 2-1
Screw
Step 2-2
Step 2-3
Screw
ENGLISH
BEFORE YOU OPERATE THE MONITOR 15
Signal Timing
Change to the desired signal timing listed on page 33: COMPLIANT TIMING.
Windows XP/Vista/7/8/8.1/10 Plug & Play
The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs
on Windows XP/Vista/7/8/8.1/10 by connecting the monitor to DDC2B compliant computer with
the Signal Cable supplied.
For installation on Windows XP: The monitor Information File for iiyama monitors may be
necessary for your computer and obtained via the Internet, using the address:
http://www.iiyama.com
For additional information on how to download the driver for your touch screen monitor,
please access the internet site noted above.
Monitor Drivers are not required in most cases for Macintosh or Unix operating
systems.Forfurtherinformation,pleasecontactyourcomputerdealerrstforadvice.
COMPUTER SETTING
NOTE
Procedure for turning ON the Power Switch
TurnONthemonitorrst,andthenthecomputer.
ENGLISH
16 BEFORE YOU OPERATE THE MONITOR
MULTI-TOUCH :
ThismonitorcomplieswithDDC2BofVESAstandard.(Plug&playcompliant)
The MULTI-TOUCH function runs on Windows7/8/8.1/10 by connecting the monitor to DDC2B
compliant computer with the USB cable supplied.
TOUCH support operation system :
OS Version
(Windows)
Windows
Win 10 Win8/8.1 Win7 XP
Supported touches multi-touch
Note Windows inbox driver
(NoNeedSiSdriver) Single-touch
OS Version
(LinuxDistribution)
Android
Linux7.0 6.0 5.0 ~ 5.1 4.0 ~ 4.4
Supported touches multi-touch
Supported Kernel
version 4.4 3.18 3.0~3.14 3.0~4.4
Note Driver supports multi-touch
OS Version
(MacOS)
Mac OS
10.9(Mavericks) 10.10(Yosemite) 10.11
(ElCapitan)
10.12(Sierra)
10.13(HighSierra)
Supported touches Single-touch
Note
Similar to Apple
Trackpad gesture:
2-ngergesture:
zoom in/out, swipe
4-ngergesture:
show desktop
Similar to Apple
Trackpad gesture:
2-ngergesture:
zoom in/out, swipe
4-ngergesture:
show desktop
Our service team
provides you with
the driver and the
operation guide.
Similar to Apple
Trackpad gesture:
2-ngergesture:
zoom in/out, swipe
4-ngergesture:
show desktop
Our service team
provides you with
the driver and the
operation guide.
Our service team
provides you with
the driver and the
operation guide.
ENGLISH
OPERATING THE MONITOR 17
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 33. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 24 for SCREEN ADJUSTMENTS.
Press the MENU Button to start the On Screen Display feature. There are additional
Menu items which can be switched by using the / Buttons.
Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Use the SELECT Button to highlight the desired adjustment icon.
Use the / Buttons to make the appropriate adjustment or setting.
Press the MENU Button to leave the menu, and the settings you just made would be
automatically saved.
When button operations are aborted during adjustment, On-Screen Display disappears when the
time set for the OSD Timeout has passed.
MENU button can be used to return previous menu item.
Any changes are automatically saved in the memory when the On Screen Display
disappears.
TurningothepowershouldbeavoidedwhileusingtheMenu.
Adjustments for H/V Position, Clock and Phase are saved for each signal timing. Except for these
adjustments, all other adjustments have only one setting which applies to all signal timings.
NOTE
For example, to correct for vertical position, select Menu item of Picture. Then, select V Position
by using the SELECT Button.
Use the / Buttons to change the vertical position settings. The vertical position of the
overall display should be changing accordingly while you are doing this.
Press the MENU Button lastly, it ends, all changes are saved in the memory.
Picture Advanced OSD Option
Contrast
Brightness
H Position
V Position
Phase
Clock
Auto
Picture Advanced OSD Option
V Position
ENGLISH
18 OPERATING THE MONITOR
TOUCH FANCTION DISABLE:
ON: Pressing and holding of the MENU Button and the SELECT Button at the same time when
the Menu is not displayed, massage "TOUCH DISABLE" will appear on the top right corner.
OFF: Pressing and holding of the MENU Button and the SELECT Button at the same time for
about 5 seconds when the Menu is not displayed, till "TOUCH DISABLE" disappears.
LOCK MODE:
Simultaneously press the MENU button and the button when an image is displayed through
VGA, DVI, HDMI, DisplayPort or SDM.
* The OSD menu is not displayed when the OSD is locked. Press the MENU button and the
button simultaneously again.
The following OSD menu is displayed.
Direct
Adjustment Item Problem / Option
OSD
POWER Inactive
Active The POWER SWITCH is Locked.
The POWER SWITCH is Unlocked.
Inactive
Active The OSD menu is Locked.
The OSD menu is Unlocked.
<Touch OSD function>
WhentheTouchfunctionisactive,youcanoperatetheOSDmenubytouchingitwithyournger.
To exit the OSD after saving the settings or adjustments, touch the screen other than on the OSD.
* To display the OSD menu, press the MENU button.
ENGLISH
OPERATING THE MONITOR 19
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option Button to Press
Too dark
Too bright
Brightness*1
Contrast Too dull
Too intense
*1 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
bright.
*2 See page 24 for SCREEN ADJUSTMENTS.
*3 For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 24 for
SCREEN ADJUSTMENTS.
*4 Only Analog Input.
You can skip the Menu items and directly display an adjustment scale by using the following button
operations.
Contrast: Press the Button when the Menu is not displayed.
Brightness: Press the Button when the Menu is not displayed.
Direct
Direct
Picture Advanced OSD Option
Contrast
Brightness
H Position
V Position
Phase
Clock
Auto
Direct
Phase*2,4
Clock*2,4
Too left
Too right
Too low
Too high
H Position*4
V Position*4
Too narrow
Too wide
Tocorrectickeringtextorlines
Auto*3,4 Adjust H/V Position, Clock and Phase automatically.
Picture
ENGLISH
20 OPERATING THE MONITOR
Picture Advanced OSD Option
Color Temp
Red
Green
Blue
Sharpness
User
Adjustment Item Problem / Option Button to Press
Green
Red Too weak
Too strong
User
9300k
Color Temp
5500k
6500k
7500k
Blue
Sharpness
Youcanchangethepicturequalityfrom0to100(soft
tosharp).
Press the Button to change the picture quality in
numerical order. Press the Button to change the
picture quality in reverse numerical order.
Adjust the picture quality at resolutions of less 1920
x1080(ProLiteT4361MSC)or3840x2160(ProLite
T5561UHSC).Youcanchangethepicturequality.
Advanced
ENGLISH
OPERATING THE MONITOR 21
Picture Advanced OSD Option
User
OSD Timeout
OSD Position
OSD H Pos.
OSD V Pos.
Touch Switch Normal
White Wash
Image Shift
No
No
OSD Timeout
OSD H Pos. OSD is too left
OSD is too right
OSD is too low
OSD is too high
You can set the OSD display duration time
between 5 and 60 seconds.
Adjustment Item Problem / Option Button to Press
OSD V Pos.
OSD Position
OSD
You can set the OSD position.
User(Upperleft/Lowerleft/Upperright/Lower
right/Center)
Touch Switch *
Normal
Glove
Through-Glass
Normaltouch(withbarehandsorstylusdevice)
Touchwithglovedhand(Supportsthickness+2mm,
5ptstouch)
Touchthroughglass(Supportsthickness+6mm,
2ptstouch)
* Please turn on the power and set the Touch Switch after the monitor installation is completed.
Turning on the power and setting the Touch Switch before the monitor installation may cause
misalignment or malfunction of the touch calibration.
White Wash
Image Shift
No
Yes
WhiteWashisturnedo.
No
Yes
ImageShiftisturnedo.
When the monitor will go into sleep mode, an all-
white pattern will be displayed for 30 minutes.
To prevent burn-in as much as possible, an image
will randomly move in 2 dots by the minute.
ENGLISH
22 OPERATING THE MONITOR
Picture Advanced OSD Option
Factory Reset
Language
Source Select
DisplayMode
Auto Dim.
English
VGA
Volume
Mute
5
No
No
Adjustment Item Problem / Option Button to Press
Language
English
Deutsch
English
German
Français French Japanese
Italiano Italian SimpliedChinese
Español Spanish
Traditional Chinese
Source Select
However it will automatically be selected when just one source is using.
In Power Management Mode input switching is disabled.
Inputsourceisxed,notselectedautomaticallywhenDVI-A,DVI-D,HDMI1,HDMI2,
DisplayPort and SDM which are selected.
Selecttheanalog(DVI-A)input.
Selectthedigital(HDMI1)input.
DVI-A*1
HDMI1*1
NOTE
Search for an available input source and select
automatically.
Auto
Direct
You can skip the Menu items and directly display an option setting screen by using the
following button operations.
Source Select : Pressing and holding of the SELECT Button for about 5 seconds
when the Menu is not displayed. By pressing the SELECT Button
during power management mode, the Source Select menu will be
displayed.
Direct
Selectthedigital(DisplayPort)input.
DP
Reset Factory-preset data is restored.
Option
No
Yes
Return to Menu.
繁中
中
Select the SDM input.
SDM*2
Source Select
However it will automatically be selected when just one source is using.
In Power Management Mode input switching is disabled.
Inputsourceisxed,notselectedautomaticallywhenVGA,DVI,HDMI,DisplayPortand
SDM which are selected.
Select the analog input.
Selectthedigital(HDMI)input.
VGA*3
HDMI*3
NOTE
Search for an available input source and select
automatically.
Auto
Direct
Selectthedigital(DisplayPort)input.DP
Select the SDM input.
SDM*2
For ProLite T4361MSC
For ProLite T5561UHSC Selectthedigital(HDMI2)input.HDMI2*1
DVI-D*1Selectthedigital(DVI-D)input.
*1 Available for ProLite T5561UHSC only.
*2 SDM can only be used when Option SDM is installed.
*3 Available for ProLite T4361MSC only.
Selectthedigital(DVI)input.
DVI*3
ENGLISH
OPERATING THE MONITOR 23
Picture Advanced OSD Option
Factory Reset
Language
Source Select
DisplayMode
Auto Dim.
English
VGA
Volume
Mute
5
No
No
Adjustment Item Problem / Option Button to Press
Option
Mute Return the sound volume to the previous level.
Turnothesoundtemporarily.
No
Yes
Automatically adjust image brightness to
changing ambient lighting conditions.
Auto Dim.isturnedo.
No
Yes
Auto Dim.
Volume Too soft
Too loud
Display Mode
See your graphic card user guide for more information about
changing the resolution and refresh.
Displays information regarding the current input signal coming
from the graphic card in your computer.
NOTE
ENGLISH
24 OPERATING THE MONITOR
SCREEN ADJUSTMENTS
The screen adjustments described in this manual are designed to set image position and minimize
ickerorblurfortheparticularcomputerinuse.
ProLite T5561UHSC : The monitor is designed to provide the best performance at resolution of 3840
× 2160, but can not provide the best at resolutions of less than 3840 × 2160 because the picture
isautomaticallystretchedtotthefullscreen.Itisrecommendedtooperateatresolutionof3840×
2160 in normal use.
ProLite T4361MSC : The monitor is designed to provide the best performance at resolution of 1920
× 1080, but can not provide the best at resolutions of less than 1920 × 1080 because the picture
isautomaticallystretchedtotthefullscreen.Itisrecommendedtooperateatresolutionof1920×
1080 in normal use.
Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to
the screen enlargement process.
It is preferable to adjust the image position and frequency with the monitor controls, rather than
the computer software or utilities.
Perform adjustments after a warm-up period of at least thirty minutes.
Additional adjustments may be required after the Auto Adjust depending on the resolution or signal timing.
The Auto Adjust may not work correctly when displaying the picture other than the screen
adjustment pattern. In this case, manual adjustments are required.
There are two ways to adjust the screen. One way is automatic adjustment for Position, Clock and
Phase. The other way is performing each adjustment manually.
Perform the Auto Adjust first when the monitor is connected to a new computer, or resolution is
changed.Ifthescreenhasaickerorblur,orthepicturedoesnottinthedisplayareaafterperforming
the Auto Adjust, manual adjustments are required. Both adjustments should be made by using the
screenadjustmentpattern(Test.bmp)obtainedviatheIIYAMAwebsite(http://www.iiyama.com).
Adjust the image by following the procedure below to get the desired picture.
This manual explains adjustment under Windows® OS.
Display the picture at the optimum resolution.
Enter the Test.bmp (screen adjustment pattern) to wallpaper.
Consult the appropriate documentation for doing this.
Set the display position to center in the wallpaper setting dialogue box.
[Adjustment pattern]
Zebra pattern
Color bar
Picture frame
NOTE
Adjust the image by following the procedure below to get the desired picture when selecting Analog input.
ENGLISH
OPERATING THE MONITOR 25
1) Adjust the H Position so that the left side of the picture frame will move to the left edge
of the display area.
When the left side of the picture frame moves apart from the left edge of the display
areaduringtheClockadjustment,adjuststeps1)and2).
Another way to make the Clock adjustment is to correct the vertical wavy lines in the
zebra pattern.
ThepicturemayickerduringtheClock,H/VPositionadjustment.
In case the picture frame is bigger or smaller than the data display area after the
Clock adjustment, repeat steps from .
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the Clock.
Adjust the Auto Adjustment.
Adjusttheimagemanuallybyfollowingprocedurebelowwhenthescreenhasaickeror
blur,orthepicturedoesnottinthedisplayareaafterperformingtheAutoAdjust.
AdjusttheVPositionsothatthetopandbottomofthepictureframewillttothedisplay
area.
NOTE
ENGLISH
26 OPERATING THE MONITOR
Incasethestrongickerorblursremainonapartofthescreen,repeatsteps and
becausetheClockmaynotbeadjustedcorrectly.Iftheickerorblursstillremain,set
therefreshrateofcomputertolow(60Hz)andrepeatstepsfrom again.
Adjust the H Position after the Phase adjustment if the horizontal position moves
during the adjustment.
Adjust the Brightness and Color to get the desired picture after you complete the Clock
and Phase adjustments.
Put back your favorite wallpaper.
AdjustthePhasetocorrecthorizontalwavynoise,ickerorblurinthezebrapattern.
NOTE
ENGLISH
OPERATING THE MONITOR 27
Even when using the power management mode, the monitor consumes electricity. Turn
othePowerSwitchwheneverthemonitorisnotinuse,duringthenightandweekends,
to avoid unnecessary power consumption.
It is possible that the video signal from the computer may be on while the H or V sync
signal is missing. In this instance, the POWER MANAGEMENT feature may not work
properly.
NOTE
POWER MANAGEMENT FEATURE
Power Management Mode
When the H-sync signal / V-sync signal / H and V sync signals from the computer are o, the
monitor enters into Power Management Mode which reduces the power consumption to less
than 2.0W. The screen becomes dark. From Power Management Mode, the image reappears in
several seconds when either the keyboard or the mouse are touched again.
The power management feature of this product complies with power saving requirement of VESA
DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor
when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer.
There is a power management step the monitor takes as described below. The power management
function,includingany timersettingsiscongured bytheoperatingsystem.Check youroperating
systemmanualforinformationonhowthiscanbecongured.
02.0W100%
POWER
CONSUMPTION
NORMAL MODE
POWER MANAGEMENT MODE
ENGLISH
28 TROUBLE SHOOTING
The screen is not
synchronized.
The Signal Cable is properly connected.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
Thevideooutputlevelofthecomputeriswithinthespecicationofthemonitor.
The picture does
not appear.
The screen
position is not in
the center.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
The screen is too
bright or too dark.
The screen is
shaking.
The video output level of the computer is within the specication of the
monitor.
Thepowervoltageiswithinthespecicationofthemonitor.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
No sound.
Theaudioequipment(computeretc.)isON.
The Audio Cable is properly connected.
The Volume is turned up.
The Mute is OFF.
Theaudiooutputleveloftheaudioequipmentiswithinthespecicationof
the monitor.
The sound is too
loud or too quiet.
Theaudiooutputleveloftheaudioequipmentiswithinthespecicationof
the monitor.
TROUBLE SHOOTING
Problem Check
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem
you have. If the monitor does not get a picture, skip to 2.
2.ConsultthefollowingitemsifyoucannotndanappropriateadjustmentiteminOPERATINGTHE
MONITOR or if the problem persists.
3.
If you are experiencing a problem which is not described below or you cannot correct the problem,
discontinue using the monitor and contact your dealer or iiyama service center for further assistance.
ThePowerCableisrmlyseatedinthesocket.
The Power Switch is turned ON.
The AC socket is live. Please check with another piece of equipment.
If the blank screen saver is in active mode, touch the keyboard or the mouse.
Increase the Contrast and/or Brightness.
The computer is ON.
The Signal Cable is properly connected.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
If the monitor is in power management mode, touch the keyboard or the mouse.
ENGLISH
TROUBLE SHOOTING / RECYCLING INFORMATION 29
A strange noise is
heard.
The Audio Cable is properly connected.
The touch
screen shows no
response.
TheUSBCableisrmlyseatedinthesocket.
Touch screen driver software is installed.
The touch position
does not deviate.
The calibration function set up correctly.
For better environment protection please don't dispose your monitor.
Please visit our web site: www.iiyama.com for monitor recycling.
RECYCLING INFORMATION
Problem Check
ENGLISH
30 APPENDIX
APPENDIX
Designandspecicationsaresubjecttochangewithoutpriornotice.
SPECIFICATIONS : ProLite T5561UHSC
* USB peripherals / Audio equipment are not connected.NOTE
Touch
Screen
Technology Projectedcapacitive40pointsmax.(bynormalmode)
Light transmission
85%
Hardness 6H
Thickness 3mm
Communication system
USB serial transfer
Surfacenish Antingerprintcoating
Size Category 55"
LCD
Panel
Panel technology
IPS
Size Diagonal:55"(140cm)
Pixel pitch 0.315mm H × 0.315mm V
Brightness 450cd/m2(Typical:withoutTouchpanel)
Contrast ratio 1100:1(Typical)
Viewable angle Horizontal:178degrees,Vertical:178degrees(Typical)
Response time 6ms(GraytoGray)
Display Colors Approx.16.7M
Sync Frequency DVI-A/D: Horizontal: 30.0-81.0kHz, Vertical: 30-60Hz
HDMI1/DisplayPort: Horizontal: 30.0-135.0kHz, Vertical: 30-60Hz
HDMI2: Horizontal: 3
0.0-135.0kHz, Vertical: 30-60Hz
Native Resolution 3840 × 2160, 8.2 MegaPixels
Supported max. resolution DVI-A/D: 1920 × 1200 60Hz
HDMI2: 3840 × 2160 30Hz
HDMI1/DisplayPort: 3840 × 2160 60Hz
Input Connector DVI-I, HDMI × 2, DisplayPort
Input Audio Connector ø3.5mmminijack(Stereo)
Input Audio Signal 2Vrms maximum
Plug & Play VESA DDC2BTM
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal Analog:0.7Vp-p(Standard),75Ω, Positive
Digital:DVI(DigitalVisualInterfaceStandardRev.1.0)compliance
Digital: HDMI, DisplayPort
Output Audio Connector ø3.5mmminijack(Stereo)
Speakers 8W×2(Stereospeakers)
Maximum Screen Size 1209.6mm W × 680.4mm H / 47.6" W × 26.8" H
Power Source Input: 100-240VAC, 50-60Hz, 1.8-0.8A
Output: 5VDC, 2.0A
Power Consumption* 110W typical, Power management mode: 2.0W maximum
EnergyEciencyClass:C
Dimensions / Net Weight 1247.5×732.5×81.0mm/49.1×28.8×3.2"(W×H×D)
30.7kg / 67.8lbs
Environmental Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
0 to 40°C / 32 to 104°F
90%(Nocondensation)
-20 to 60°C / 4 to 140°F
90%(Nocondensation)
Approvals CB, CE, CU
ENGLISH
APPENDIX 31
SPECIFICATIONS : ProLite T4361MSC
* USB peripherals / Audio equipment are not connected.NOTE
Touch
Screen
Technology Projectedcapacitive40pointsmax.(bynormalmode)
Light transmission
84%
Hardness 7H
Thickness 3mm
Communication system
USB serial transfer
Surfacenish Antingerprintcoating
Size Category 43"
LCD
Panel
Panel technology
MVA
Size Diagonal:43"(108cm)
Pixel pitch 0.49mm H × 0.49mm V
Brightness 400cd/m2(Typical:withoutTouchpanel)
Contrast ratio 4000:1(Typical)
Viewable angle Horizontal:178degrees,Vertical:178degrees(Typical)
Response time 8ms(GraytoGray)
Display Colors Approx.16.7M
Sync Frequency VGA: Horizontal: 30.0-73.0kHz, Vertical: 47-63Hz
DVI/HDMI/DisplayPort: Horizontal: 30.0-73.0kHz, Vertical: 47-63Hz
Native Resolution 1920 × 1080, 2.1 MegaPixels
Supported max. resolution VGA: 1920 × 1080 60Hz
DVI/HDMI/DisplayPort: 1920 × 1080 60Hz
Input Connector VGA, DVI-D, HDMI, DisplayPort
Input Audio Connector ø3.5mmminijack(Stereo)
Input Audio Signal 2Vrms maximum
Plug & Play VESA DDC2BTM
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal
Analog:0.7Vp-p(Standard),75Ω, Positive
Digital:DVI(DigitalVisualInterfaceStandardRev.1.0)compliance
Digital: HDMI, DisplayPort
Speakers 8W×2(Stereospeakers)
Maximum Screen Size 940.86mm W × 529.25mm H / 37.0" W × 20.8" H
Power Source Input: 100-240VAC, 50-60Hz, 1.4-0.6A
Output: 5VDC, 2.0A
Power Consumption* 65W typical, Power management mode: 2.0W maximum
EnergyEciencyClass:B
Dimensions / Net Weight 983.0×571.5×82.5mm/38.7×22.5×3.2"(W×H×D)
19.5kg / 43.0lbs
Environmental Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
0 to 40°C / 32 to 104°F
90%(Nocondensation)
-20 to 60°C / 4 to 140°F
90%(Nocondensation)
Approvals CB, CE, CU, cULus, CCC
ENGLISH
32 APPENDIX
DIMENSIONS : ProLite T4361MSC
983.0mm/38.7”
979.0mm/38.5”
285.5mm/11.2”
567.0mm/22.3”
571.5mm/22.5”
40.0mm/1.6”
79.0mm/3.1”
82.5mm/3.2”
512.0mm/20.2”
341.0mm/13.4”
200.0mm/7.9”
400.0mm/15.7”
400.0mm/15.7”
4xM6 SCREW HOLE
(VESA MOUNT)
DIMENSIONS : ProLite T5561UHSC
1243.5mm/49.0”
1247.5mm/49.1”
366.0mm/14.4”
728.0mm/28.7”
732.5mm/28.8”
509.5mm/20.1”
40.0mm/1.6”
79.0mm/3.1”
81.0mm/3.2”
338.5mm/13.3”
200.0mm/7.9”
400.0mm/15.7”
400.0mm/15.7”
4xM6 SCREW HOLE
(VESA MOUNT)
ENGLISH
APPENDIX 33
COMPLIANT TIMING
M227B21
Video Mode Horizontal
Frequency
Vertical
Frequency Dot Clock
VESA
VGA 640 × 480 31.469kHz 59.940Hz 25.175MHz
SVGA 800 × 600 37.879kHz 60.317Hz 40.000MHz
XGA 1024 × 768 48.363kHz 60.004Hz 65.000MHz
1280 × 720 44.720kHz 60.000Hz 74.500MHz
SXGA 1280 × 1024 63.981kHz 60.020Hz 108.000MHz
WSXGA+ 1680 × 1050 65.290kHz 59.954Hz 146.250MHz
Full HD 1920 × 1080 67.500kHz 60.000Hz 148.500MHz
WUXGA 1920 × 1200 74.038kHz 59.950Hz 154.000MHz *1
UHD 3840 × 2160 30Hz 67.430kHz 29.970Hz 296.700MHz *1,2
3840 × 2160 60Hz 133.313kHz 59.997Hz 533.250MHz *1,3
*1 Available for ProLite T5561UHSC only.
*2 HDMI2 input only.
*3 HDMI1/DisplayPort input only.
NOTE