iiyama TF4338MSC-B1AG User Manual
Displayed below is the user manual for TF4338MSC-B1AG by iiyama which is a product in the Signage Displays category. This manual has pages.
Related Manuals
ENGLISH
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes
to read this comprehensive manual carefully
before installing and switching on the monitor.
Please keep this manual in a safe place for
your future reference.
USER MANUAL
ENGLISH
We reserve the right to change specifi cations without notice.
All trademarks used in this user manual are the property of their respective owners.
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the
address: http://www.iiyama.com
You can access the Web page of diff erent countries from there.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC
Directive”, 2014/35/EU “Low Voltage Directive” and 2011/65/EU “RoHS Directive”.
Warning
This is a class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PLT3238, PLT4338
ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................1
SAFETY PRECAUTIONS................................................................1
SPECIAL NOTES ON LCD MONITORS .........................................3
CUSTOMER SERVICE ...................................................................5
CLEANING ......................................................................................5
BEFORE YOU OPERATE THE MONITOR ..........................................6
FEATURES......................................................................................6
CHECKING THE CONTENTS OF THE PACKAGE ........................6
UNPACKING ...................................................................................7
SPECIAL NOTES ON ......................................................................7
CONTROLS AND CONNECTORS : MONITOR ..............................8
INSTALLATION .............................................................................10
CONTROLS AND CONNECTORS : REMOTE CONTROL ...........12
PREPARING THE REMOTE CONTROL.......................................13
BASIC OPERATION ......................................................................14
CONNECTING YOUR MONITOR .................................................17
COMPUTER SETTING .................................................................19
OPERATING THE MONITOR .............................................................21
ADJUSTMENT MENU CONTENTS ..............................................23
SCREEN ADJUSTMENTS ............................................................28
POWER MANAGEMENT FEATURE .............................................31
TROUBLE SHOOTING ......................................................................32
RECYCLING INFORMATION .............................................................33
APPENDIX ........................................................................................34
SPECIFICATIONS : ProLite TF3238MSC .....................................34
SPECIFICATIONS : ProLite TF4338MSC .....................................35
DIMENSIONS : ProLite TF3238MSC ............................................36
DIMENSIONS : ProLite TF4338MSC ............................................36
COMPLIANT TIMING ....................................................................37
ENGLISH
FOR YOUR SAFETY 1
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the
monitor and contact your dealer or iiyama service center immediately. Further use may be
dangerous and can cause fi re or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
fi re or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
any object inside may cause fi re, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fi re or electric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specifi ed power supply. Use of an incorrect voltage will
cause malfunction and may cause fi re or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objects on the cables. If damaged, the cables may cause fi re or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS
ENGLISH
2 FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or
smoky areas as it may cause fi re, electric shock or damage. You should also avoid areas where the
sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not
pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
fi re. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the
cabinet will be blocked and the monitor may overheat if the stand is removed. This may cause fi re
or damage. Operating the monitor on its back, side, upside down or on a carpet or any other soft
material may also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal
cable is disconnected. If you do not disconnect them, it may cause fi re or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to
avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable
itself as this may cause fi re or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may
damage your computer.
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
OTHERS
ENGLISH
FOR YOUR SAFETY 3
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE - When you fi rst turn on the LCD monitor, the picture may not fi t in the display area
because of the type of computer that is used. In this case, adjust the picture position to
the correct position.
- You may fi nd slightly uneven brightness on the screen depending on the desktop
pattern you use.
- Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screen is recovered slowly by changing the image or turning off the Power Switch for
hours.
SPECIAL NOTES ON LCD MONITORS
This LCD cannot be used outdoors.
If you use a cable longer than the supplied one, the picture quality is not guaranteed. Touch
function can be disrupted if the USB cable length exceeds 3m.
ENGLISH
4 FOR YOUR SAFETY
USAGE CONFIRMATION
This product is designed for optimum usage at 24hours per day.
The display is compatible for usage in Landscape/Portrait and Tabletop (face-up) applications. If
being used in Tabletop application, please utilise the Fan-on function.
IMAGE PERSISTENCE / IMAGE STICKING
Please be aware that all LCD screens can experience Image Persistence or Image Sticking. This
occurs when a residual image remains visible on a screen when static images are displayed for long
periods of time. LCD Image Persistence is not permanent but constant images being displayed for a
long period of time should be avoided.
To counteract Image Persistence, turn off the monitor for as long as the previous image was
displayed, so if an image was on the monitor for 1 hour and there is evidence of a residual or “ghost”
image, you should turn off the monitor for 1 hour in order to clear the residual image.
For all LFD products, iiyama recommends displaying moving images and utilising a moving screen
saver at regular intervals whenever the screen is idle. You could also turn off the monitor when not
in use to assist the prevention.
Other ways to reduce the risk of Image Persistence will be to utilise the FAN-on function (if
available), Low Backlight and Low Brightness settings.
FOR EXTENDED USE AS A PUBLIC DISPLAY
Image Sticking on LCD Panel
When a static image is displayed for hours, an electric charge trace remains near the electrode
inside the LCD producing a “ghost” image. (Image Persistence).
Image Persistence is not a permanent feature.
Recommendations
To prevent Image Sticking and promote longer life expectancy of display, we recommend the
following:
1. Avoid static images displayed for long periods – change static images on continuous loop.
2. Turn off monitor when not in use, either by remote control or use Power Management or Schedule
functions.
3. When monitor is installed in high ambient temperature environment(s) or in an enclosed position,
utilise the Cooling Fan, Screen Saver and Low Brightness functions.
4. Suitable ventilation for any monitor is an expectation of any installation – climate control systems
may need to be employed.
5. We strongly recommend utilisation of active cooling with fans for long operation times or high
ambient temperature environments.
ENGLISH
FOR YOUR SAFETY 5
NOTE
If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
WARNING
If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.
CAUTION
For safety reasons, turn off the power switch and unplug the monitor before you
clean it.
NOTE
To protect the LCD panel, do not scratch or rub the screen with a hard object.
Never use any of the following strong solvents. These will damage the cabinet and
the LCD screen.
Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
Thinner Benzine Abrasive cleaner
Spray-type cleaner Wax Acid or Alkaline solvent
CABINET Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
LCD
SCREEN
Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
CUSTOMER SERVICE
CLEANING
ENGLISH
6 BEFORE YOU OPERATE THE MONITOR
The following accessories are included in your package. Check to see if they are enclosed with
the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional
iiyama offi ce.
* The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used. However, all guarantees and warranties are void for any
problems or damage caused by a power cable not supplied by iiyama.
Power Cable*
HDMI Cable DisplayPort Cable
USB Cable IR Extender Cable Remote Control
Battery (2pcs) Clamper Safety Guide
Quick Start Guide
BEFORE YOU OPERATE THE MONITOR
CHECKING THE CONTENTS OF THE PACKAGE
CAUTION
FEATURES
Supports Resolutions up to 1920 × 1080
High Contrast 3000:1 (Typical) / Brightness 500cd/m2 (Typical: without Touch
panel) : ProLite TF3238MSC
High Contrast 1100:1 (Typical) / Brightness 450cd/m2 (Typical: without Touch
panel) : ProLite TF4338MSC
Digital Character Smoothing
Automatic Set-up
Stereo Speakers
2 × 8W Stereo Speakers
Plug & Play VESA DDC2B Compliant
Windows® 7/8/8.1/10 Compliant
Power Management (VESA DPMS Compliant)
VESA Mounting Standard (400mm×200mm) Compliant
Glass with AG coating
ENGLISH
BEFORE YOU OPERATE THE MONITOR 7
UNPACKING
Before unpacking your monitor, prepare a stable, level, and clean surface near a wall outlet.
Set the LCD Monitor box in an upright position and open from the top of the box before removing
the top cushions.
Remove the carton holders.
Remove the top cushion and take
the accessories box and the Monitor out.
CAUTION
Moving the monitor requires at least two people. If not, it may drop
and could result in a serious injury.
When moving/shipping the monitor, please hold by the carton holders.
SPECIAL NOTES ON
Permanent damage can occur if Sharp Edged, Pointed or Metal items are used to activate Touch.
This could invalidate any remaining warranty.
We recommend you use a plastic stylus (tip R0.8 or over) or fi nger.
CAUTION
Pinch and Pull the Knob.
ENGLISH
8 BEFORE YOU OPERATE THE MONITOR
CONTROLS AND CONNECTORS : MONITOR
<Back Controller>
<Front>
Power Indicator Green Normal Operation
Orange Power Management
Power Button
Left / - Button
Right / + Button
Up Button
Down Button
MENU Menu Button
ENTER/
VIDEO SOURCE Enter / Input Select Button
ENGLISH
BEFORE YOU OPERATE THE MONITOR 9
<Back>
HDMI DVI DP D-Sub RS232 USB External
IR Line in/out RJ45
HDMI
AC-IN
IR Sensor Remote Sensor
HDMII HDMI1
HDMI2 HDMI Connector
DVI DVI-D DVI-D Connector
DP DisplayPort DisplayPort Connector
D-sub VGA VGA Connector
RS232C RS232C
9pin RS232C Connector
USB USB Touch USB Connector
External IR Mini jack IR Connector
Line In Mini Jack Audio Input Connector
Line Out Mini Jack Headphone connector
RJ45 RJ45 RJ45 Connector
AC SWITCH
(ON) / (OFF)
MAIN
POWER Main Power Switch
AC IN AC-INLET AC Connector( : Alternating current) (AC-IN)
SPEAKERS Speakers
ENGLISH
10 BEFORE YOU OPERATE THE MONITOR
INSTALLATION
CAUTION
Follow the manual instructions for the type of mount you have selected. Refer all servicing to
qualifi ed service personnel.
Moving the monitor requires at least two people.
Before installing, please make sure the wall is strong enough to hold the necessary weight of the
display and the mount.
[WALL MOUNTING]
When using the wall mounting, consideration of thickness of the mounting stage needs to be taken.
Tighten the M6 Screw with washer which “L” length is 10mm to fasten the monitor. Using a screw
longer than this may cause electric shock or damage because it may contact with the electrical parts
inside the monitor.
CAUTION
L
Mounting Stage Screw
Chassis
[FAN]
If the screen is used in face-up position, please be sure to turn on the FAN function.
If you do not use the FAN, the internal temperature rises and the product life cycle may get shorter.
If the screen is built into an external cabinet, please be sure to implement a cooling unit inside of the
cabinet.
Dirt and dust may stick to the FAN, reducing the cooling eff ect which may result in a shorter life
cycle of the product. Please clean regularly.
CAUTION
ENGLISH
BEFORE YOU OPERATE THE MONITOR 11
[ROTATING THE DISPLAY]
It is designed to be compatible in both landscape and portrait modes.
A
A
Not Available
● ProLite TF3238MSC
● ProLite TF4338MSC
A
A
Landscape
Portrait
Available
A
A
Not Available
A
A
Landscape
Portrait
Available
ENGLISH
12 BEFORE YOU OPERATE THE MONITOR
CONTROLS AND CONNECTORS : REMOTE CONTROL
ON/OFF Turns the monitor ON and OFF.
INPUT Selects the source.
Number (1-9) /
Input source
Serve as input source buttons when
the Menu is not displayed.
(VGA/DVI/HDMI-1/HDMI-2/DP)
Number (7) /
MODE Select the Picture mode.
EXIT Returns to a previous menu or closes
the OSD Menu.
Navigates through submenus and
settings.
: Up Button
: Down Button
: Left Button
: Right Button
(VOLUME-): Decreases the sound
volume.
(VOLUME+): Increases the sound
volume.
OK Confi rms your selection or save
changes.
INFO Provides source and resolution
information.
MENU
Opens the monitor's on-screen menu
systems. When the menu system is
already open, pressing this button
will select the previous submenu.
Number (0)/
MUTE
Turns on or off the mute function
when the Menu is not displayed.
ENGLISH
BEFORE YOU OPERATE THE MONITOR 13
To use the remote control, insert the two dry batteries.
PREPARING THE REMOTE CONTROL
CAUTION
Do not use any other batteries other than those specifi ed in this manual for the Remote Control. Do
not insert old and new batteries together in the Remote Control. Make sure that the terminals match
the "+" and "-" indications in the battery compartment. Burst batteries or the electrolyte from these
batteries may cause stains, fi re or injury.
Slide back and remove the battery cover in the direction of the arrow.
Align and insert two AAA batteries according to their plus and minus ports (as indicated in the
remote control).
Replace the battery cover in the direction of the arrow and snap it back into place.
NOTE Replace with new batteries when the Remote Control does not work close to the
monitor. Use AAA dry batteries.
Operate the Remote Control by pointing it toward the Remote Sensor on the monitor.
Other manufacturers remote control will not work with this monitor. Use the provided
Remote Control ONLY.
Used batteries needed to follow the local rules to be discarded. (Suggestion: to dispose
of used batteries please follow correct policy as per your local regulations.)
Battery x 2
ENGLISH
14 BEFORE YOU OPERATE THE MONITOR
BASIC OPERATION
Turning the monitor ON
The monitor is turned On and the Power Indicator turns to Green when you press the POWER
Button on the monitor or the Remote Control. The monitor is turned Off and the Power Indicator
turns to Red when you press the POWER Button on the monitor or the Remote Control.
Press again to turn On the monitor.
NOTE
Even when using the power management mode or turning OFF the Power Switch, the monitor
will consume a small amount of electricity. Disconnect the Power Cable from the power supply
whenever the monitor is not in use or during the night, to avoid unnecessary power consumption.
[Remote Control]
Display the adjustment menu page
The menu page appears on the screen when you press the MENU Button on the monitor or the
Remote Control.
The menu page disappears when you press the EXIT Button on the Remote Control again.
[Monitor]
[Remote Control][Monitor]
ENGLISH
BEFORE YOU OPERATE THE MONITOR 15
Move the cursor horizontally
Select menu or setting, or perform the adjustment by pressing the / Button while the menu
page is displayed on the screen.
Move the cursor vertically
Select adjustment by pressing the / Button while the menu page is displayed on the screen.
[Remote Control]
[Monitor]
[Remote Control]
[Monitor]
ENGLISH
16 BEFORE YOU OPERATE THE MONITOR
Adjust the volume of sound
Press the / Button to adjust the volume of sound when the menu page is not displayed on
the screen.
Switch the input signal
Press the VIDEO SOURCE Button on the monitor or INPUT Button on the Remote Control to
display the Input signal menu when the menu page is not displayed on the screen. Press the /
Button or Input source Button to switch the Input signal.
[Remote Control][Monitor]
[Remote Control][Monitor]
ENGLISH
BEFORE YOU OPERATE THE MONITOR 17
CONNECTING YOUR MONITOR
Ensure that both the computer and the monitor are switched off .
Connect the computer to the monitor with the signal cable.
Connect the computer to the monitor with the USB Cable.
Connect the Power Cable to the monitor fi rst and then to the power supply.
Turn on your monitor (Main Power Switch and Power Switch) and computer.
The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regional iiyama offi ce.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama offi ce for a suitable adaptor.
Make sure you tighten the fi nger screws at each end of the Signal Cable.
When USB cable connected than wait for 5 seconds and the touch function is ready to
go. It can be activated by pen, fi nger or any other pointer.*
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.
[Example of Connection]
<Back>
NOTE
*
Cable is not supplied with the monitor. If you use low quality Cable, it may cause a result of electro-
magnetic interference. Please contact the iiyama Support Centre in your country if you wish to connect
the monitor via the VGA or DVI input.
Router
Computer
AV Equipment
VGA Cable (Not Included)*
HDMI Cable (Accessory)
Power Cable (Accessory)
USB Cable (Accessory)
Audio Cable (Not Included)
HDMI Cable (Not Included)
DVI-D Cable (Not Included)*
DisplayPort Cable (Accessory)
RS-232C Cable (Not Included)
IR Extender Cable (Accessory)
LAN(RJ45) Cable (Not Included)
ENGLISH
18 BEFORE YOU OPERATE THE MONITOR
[ Network Connection ]
Connecting to a LAN
To set the monitor to connect to a local area network.
1. Connect a RJ45 cable to the corresponding ports on the monitor and your LAN switch or router.
2. Enter the OSD menu Setting > Control Setting. Select LAN.
3. Enter the next OSD menu Setting > Network Settings > IP Address DHCP or Manual
Setup
• If you are in a DHCP environment, highlight Auto Setup and select On. Once done, the IP
Address, Subnet Mask, Default Gateway, and Primary DNS settings will be displayed.
• If you are not in a DHCP environment, highlight Auto Setup and select Off . Contact your ITS
administrator for information on the IP Address, Subnet Mask, Default Gateway, and Primary
DNS settings and enter it accordingly.
Controlling the Monitor
Once you have the correct IP Address for your monitor and the monitor is on or in standby mode,
you can use any computer that is on the same local area network to control the monitor.
• You can not control the monitor via the RS-232C connector when LAN control is in use.
• It is recommended that you use Google Chrome versions 51.0.2704.103 or higher
browser.
1. Enter the IP Address of the monitor in the address bar of your browser and press ENTER
button.
2. The setting page appears.
INFORMATION / PICTURE&SOUND / SCREEN / SETTING / SCHEDULE / NETWORK
NOTE
ENGLISH
BEFORE YOU OPERATE THE MONITOR 19
Signal Timing
Change to the desired signal timing listed on page 37: COMPLIANT TIMING.
Windows XP/Vista/7/8/8.1/10 Plug & Play
The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs
on Windows XP/Vista/7/8/8.1/10 by connecting the monitor to DDC2B compliant computer with
the Signal Cable supplied.
For installation on Windows XP: The monitor Information File for iiyama monitors may be
necessary for your computer and obtained via the Internet, using the address:
http://www.iiyama.com
For additional information on how to download the driver for your touch screen monitor,
please access the internet site noted above.
Monitor Drivers are not required in most cases for Macintosh or Unix operating
systems. For further information, please contact your computer dealer fi rst for advice.
COMPUTER SETTING
NOTE
Procedure for turning ON the Power Switch
Turn ON the monitor fi rst, and then the computer.
ENGLISH
20 BEFORE YOU OPERATE THE MONITOR
MULTI-TOUCH :
This monitor complies with DDC2B of VESA standard. (Plug&play compliant)
The MULTI-TOUCH function runs on Windows7/8/8.1/10 by connecting the monitor to DDC2B
compliant computer with the USB cable supplied.
TOUCH support operation system :
OS Version
(Windows)
Windows
Win 10 Win8 Win7 XP
Supported touches multi-touch
Note Windows inbox driver
(No Need SiS driver)
1. Single-touch
2. for Dual-Monitor
OS Version
(Linux Distribution)
Android
Linux6.0 5.0 ~ 5.1 4.0 ~ 4.4
Supported touches multi-touch
Supported Kernel
version 3.18 2.6.38~3.14 2.6.38~3.18
Note Driver supports multi-touch
OS Version
(Mac OS)
Mac OS
10.9 (Mavericks) 10.10 (Yosemite) 10.11
(El Capitan) 10.12 (Sierra)
Supported touches single-touch
Note
Similar to Apple
Trackpad gesture:
2-fi nger gesture:
zoom in/out, swipe
4-fi nger gesture:
show desktop
Similar to Apple
Trackpad gesture:
2-fi nger gesture:
zoom in/out, swipe
4-fi nger gesture:
show desktop
Driver team need to
help add PID/VID in
driver source code.
Similar to Apple
Trackpad gesture:
2-fi nger gesture:
zoom in/out, swipe
4-fi nger gesture:
show desktop
Driver team need to
help add PID/VID in
driver source code.
Driver team need to
help add PID/VID in
driver source code.
ENGLISH
OPERATING THE MONITOR 21
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 37. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 28 for SCREEN ADJUSTMENTS.
Press the MENU button to start the On Screen Display feature. There are additional
Menu items which can be switched by using the / buttons.
Select the Menu item of the adjustment you want to make. Press the OK button on
the remote control or ENTER button on the monitor and enter the menu page. Then,
use the / buttons to highlight the desired adjustment item.
Press the OK button on the remote control or ENTER button on the monitor again.
Use the / buttons to make the appropriate adjustment or setting.
Press the EXIT button to leave the menu, and the settings you just made would be
automatically saved.
The EXIT button on the remote control can be used to return previous menu item.
Any changes are automatically saved in the memory when the On Screen Display
disappears.
Turning off the power should be avoided while using the Menu.
Adjustments for Image Position, Clock Frequency and Phase are saved for each signal timing.
Except for these adjustments, all other adjustments have only one setting which applies to all
signal timings.
NOTE
For example, to correct for vertical position, select Menu item of Screen. Select "Screen" by
using the / buttons. Press the OK button on the remote control. Next, select "Adjust
Screen" by using the / buttons. Press the OK button on the remote control. Then, select
"V. Position" by using the / buttons.
Use the / buttons to change the vertical position settings. The vertical position of the
overall display should be changing accordingly while you are doing this.
Press the EXIT button on the remote control lastly, it ends, all changes are saved in the memory.
Picture
Move Enter
ENTER
/OK EXIT
Exit
Picture Mode
Backlight
Contrast
Brightness
Chroma
Phase
Sharpness
Color Temp.
Reset
Standard
100
80
50
50
50
5
Custom
Screen
Move Enter
ENTER
/OK EXIT
Exit
Aspect
Touch Feature
Normal
Off
Adjust Screen
Screen
Move Enter
ENTER
/OK EXIT
Exit
Phase
Clock Frequency
34
0
50
H. Position
Auto Adjustment
50
V. Position
ENGLISH
22 OPERATING THE MONITOR
[LOCK MODE]
Back Controller Button:
Pressing and holding the MENU and buttons for about 5 seconds, will lock/unlock the Back
Controller Button Lock function.
Power Button:
Pressing and holding the MENU and ENTER buttons for about 5 seconds, will lock/unlock the
Power Button Lock function.
Remote Control Button:
Pressing and holding the MENU and buttons for about 5 seconds, will lock/unlock the Remote
Control Button Lock function.
* Available Back Controller only.
PALM REJECTION FUNCTION:
Palm rejection is a way to disregard touch made with “a large contact area” while fi nger modes.
A large contact area : palm, clenched fi st, elbow, arm, etc.
When you touch the screen with a fi nger, palm rejection is activated and the screen does not
recognize touch made with the large contact area.
ENGLISH
OPERATING THE MONITOR 23
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option Button to Press
Too dark
Too bright
Brightness*1,3
Contrast*3Too dull
Too intense
Picture Mode*3
Custom
Vivid
Cinema
Standard
Displays a picture on a screen set by Image
Settings adjustments.
For displaying outdoor scenery images.
For movie and video environment.
For general windows environment and monitor
default setting.
Sharpness Too soft
Too sharp
Chroma*2Too weak
Too strong
Backlight Brightness of back light is reduced.
Picture
Too weak
Too strong
Custom
R
G
B
Neutral
Warm
Cool
Color Temp.*3
Phase Purplish
Greenish
Picture
Move Enter
ENTER
/OK EXIT
Exit
Picture Mode
Backlight
Contrast
Brightness
Chroma
Phase
Sharpness
Color Temp.
Reset
Standard
100
80
50
50
50
5
Custom
Greenish white
Reddish white
Bluish white
Reset Resets all settings in the Picture menu.
*1
Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright.
*2 Only HDMI and DisplayPort inputs.
*3 Contrast, Brightness, Color Temp. and Picture Mode cannot be adjusted and selected while Adv.
Contrast is active.
Cancel
OK
Return to Menu.
ENGLISH
24 OPERATING THE MONITOR
Adjustment Item Problem / Option Button to Press
Audio Source Audio-In Select the Line-In input.
Sound
Auto Select the audio input automatically.
Balance Left side speaker louder
Right side speaker louder
Treble Too weak
Too strong
Volume
Bass Too weak
Too strong
Too soft
Too loud
Mute Off
On Turn off the sound temporarily.
Return the sound volume to the previous level.
Speaker Line-out
Internal Select the Internal Speaker.
Select the External Speaker or Headphone.
Reset Resets all settings in the Sound Settings menu.
Sound
Move Enter
ENTER
/OK EXIT
Exit
Treble
Bass
Balance
Volume
Mute
Speaker
Audio Source
Reset
Off
0
Center
50
0
Internal
Audio In
Cancel
OK
Return to Menu.
ENGLISH
OPERATING THE MONITOR 25
Aspect*5
Auto
Adjustment*4Adjusts Position, Clock Frequency and Phase
automatically.
Clock
Frequency
Too narrow
Too wide
Phase To correct fl ickering text or lines
H. Position Too far to the left
Too far to the right
Too low
Too high
V. Position
Adjustment Item Problem / Option Button to Press
Screen
4:3*1
Real*2
Displays all picture in 4:3 aspect ratio.
Displays the picture dot by dot.
Adjust Screen*3
Normal*2Enlarges the picture to fi ll the screen in the vertical
direction, keeping the same aspect ratio.
16:10*1Displays all picture in 16:10 aspect ratio.
5:4*1Displays all picture in 5:4 aspect ratio.
Touch Feature On
Off Return to Menu.
Enable the touch function.
Display wall will be disabled to optimize
touch performance.
NOTE
*1 Only HDMI(Video) and DisplayPort inputs.
*2 Only VGA and HDMI(PC) inputs.
*3 Only VGA input.
*4 For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 28 for
SCREEN ADJUSTMENTS.
*5 If the Touch Feature is enabled, this feature is not available.
Screen
Move Enter
ENTER
/OK EXIT
Exit
Aspect
Adjust Screen
Touch Feature
Normal
Off
Cancel
OK
Return to Menu.
ENGLISH
26 OPERATING THE MONITOR
Adjustment Item Problem / Option Button to Press
Language
Setting
English
Deutsch
English
German
Français French
Russian
Polski Polish
Power Save *2
Low
Off Power Save is turned off .
Dutch Nederlands
All input sources can activate entering the
power saving mode, but only the VGA signal
can deactivate it. If an another input source
is connected you have to press the POWER
button.
Control Setting RS-232C
LAN
Off
Selects the RS-232C to control the display.
Selects this option to control the display via LAN.
Network Settings *6
Once you are connected, the IP
Address, Subnet mask, Default
gateway, Primary DNS and Secondary
DNS settings are displayed
automatically.
DHCP
Manual
If you are not connected, contact your IT
administrator for information on the
IP Address,
Subnet mask, Default gateway,
Primary DNS
and
Secondary DNS
settings and enter them
accordingly.
Italian Italiano
Schedule
Today *1Displays the current date and time.
Year/Month/Day/Hour/Minute
Time set / Date set
Sets when to turn on or off the display.
Off /On(Date Set/Input/On Timer/Off Timer)
Clock Display On
Off
Displays time.
Clock Display is turned off .
On/Off Timer
Control Setting is turned off .
Cancel
Execute
Return to Menu.
Setting
Move Enter
ENTER
/OK EXIT
Exit
Language
Schedule
Power Save
English
Off
Control Setting
Network Settings
Advanced
Information
All Reset
Off
Advanced
Auto Search Automatically detects available input
sources.
Auto
Adjustment *3Adjusts Position, Clock Frequency
and Phase automatically.
On
Off Auto Search is turned off .
On
Off Auto Adjustment is turned off .
Español Spanish
ENGLISH
OPERATING THE MONITOR 27
*1 You must set this item when using "On/Off Timer".
*2 RS-232C can bring any mode out of the power saving status.
*3 For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 28 for
SCREEN ADJUSTMENTS.
*4 If the screen is used in face-up position, please be sure to turn on the FAN function.
*5 IP adress is displayed only when LAN is connected.
*6 It can be used when LAN of Control Setting is selected.
Adjustment Item Problem / Option Button to Press
Setting
Anti Image
Retention
The fan turns on automatically when the
monitor's internal temperature reaches
60°C or higher.
OSD Info Box
OSD Info Box is turned off .
Switching signal inputs, or changing timing,
the current input source and resolution
information will be displayed on the screen.
On
Off
OSD Rotation
On
Off
Landscape
Portrait Portrait display
Landscape display
See your graphic card user guide for more information about
changing the resolution and refresh.
Model Name/Operation Time/Software Version/LAN Version/IP Address*5
NOTE
Information
All Reset Factory-preset data is restored.
OK
Cancel Return to Menu.
Opening Logo
On
Off
iiyama Logo displayed when the monitor is
turned on.
iiyama Logo does not display when the
monitor is turned on.
Advanced
Adv. Contrast Increased Contrast Ratio
On
Off Typical Contrast Ratio
Not available on this model.
DP
Fan *4
Off
On Fan is turned on.
Auto
Fan is turned off .
Dot Wash Dot wash is turned off .
White Wash
To prevent burn-in, set the display time of all
white pattern after Sleep mode with no signal.
Off / 15min / 30min
Setting
Move Enter
ENTER
/OK EXIT
Exit
Language
Schedule
Power Save
English
Off
Control Setting
Network Settings
Advanced
Information
All Reset
Off
Draw a 4x4 pixel block on the screen.
ENGLISH
28 OPERATING THE MONITOR
SCREEN ADJUSTMENTS
The screen adjustments described in this manual are designed to set image position and minimize
fl icker or blur for the particular computer in use.
The monitor is designed to provide the best performance at resolution of 1920 × 1080, but can not
provide the best at resolutions of less than 1920 × 1080 because the picture is automatically stretched
to fi t the full screen. It is recommended to operate at resolution of 1920 × 1080 in normal use.
Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to
the screen enlargement process.
It is preferable to adjust the image position and frequency with the monitor controls, rather than
the computer software or utilities.
Perform adjustments after a warm-up period of at least thirty minutes.
Additional adjustments may be required after the Auto Adjust depending on the resolution or signal timing.
The Auto Adjust may not work correctly when displaying the picture other than the screen
adjustment pattern. In this case, manual adjustments are required.
There are two ways to adjust the screen. One way is automatic adjustment for Position, Clock
Frequency and Phase. The other way is performing each adjustment manually.
Perform the Auto Adjust first when the monitor is connected to a new computer, or resolution is
changed. If the screen has a fl icker or blur, or the picture does not fi t in the display area after performing
the Auto Adjust, manual adjustments are required. Both adjustments should be made by using the
screen adjustment pattern (Test.bmp) obtained via the IIYAMA web site (http://www.iiyama.com).
Adjust the image by following the procedure below to get the desired picture.
This manual explains adjustment under Windows® OS.
Display the picture at the optimum resolution.
Enter the Test.bmp (screen adjustment pattern) to wallpaper.
Consult the appropriate documentation for doing this.
Test.bmp is made at resolution of 1280 × 1024. Set the display position to center in
the wallpaper setting dialogue box. If you use Microsoft® PLUS! 95/98 cancel the
setting of “Stretch desktop wallpaper to fi t the screen”.
[Adjustment pattern]
Zebra pattern
Color bar
Picture frame
NOTE
Adjust the image by following the procedure below to get the desired picture when selecting Analog input.
ENGLISH
OPERATING THE MONITOR 29
1) Adjust the H-Position so that the left side of the picture frame will move to the left edge
of the display area.
When the left side of the picture frame moves apart from the left edge of the display
area during the Clock Frequency adjustment, adjust steps 1) and 2).
Another way to make the Clock Frequency adjustment is to correct the vertical wavy
lines in the zebra pattern.
The picture may fl icker during the Clock Frequency, H/V-Position adjustment.
In case the picture frame is bigger or smaller than the data display area after the
Clock Frequency adjustment, repeat steps from .
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the Clock Frequency.
Adjust the Auto Adjustment.
Adjust the image manually by following procedure below when the screen has a fl icker or
blur, or the picture does not fi t in the display area after performing the Auto Adjust.
Adjust the V-Position so that the top and bottom of the picture frame will fi t to the display
area.
NOTE
ENGLISH
30 OPERATING THE MONITOR
In case the strong fl icker or blurs remain on a part of the screen, repeat steps and
because the Clock Frequency may not be adjusted correctly. If the fl icker or blurs still
remain, set the refresh rate of computer to low (60Hz) and repeat steps from again.
Adjust the H-Position after the Phase adjustment if the horizontal position moves
during the adjustment.
Adjust the Brightness and Color to get the desired picture after you complete the Clock
Frequency and Phase adjustments.
Put back your favorite wallpaper.
Adjust the Phase to correct horizontal wavy noise, fl icker or blur in the zebra pattern.
NOTE
ENGLISH
OPERATING THE MONITOR 31
Even when using the power management mode, the monitor consumes electricity. Turn
off the Power Switch whenever the monitor is not in use, during the night and weekends,
to avoid unnecessary power consumption.
It is possible that the video signal from the computer may be on while the H or V sync
signal is missing. In this instance, the POWER MANAGEMENT feature may not work
properly.
NOTE
POWER MANAGEMENT FEATURE
Power Management Mode
When the H-sync signal / V-sync signal / H and V sync signals from the computer are off , the
monitor enters into Power Management Mode which reduces the power consumption to less
than 1.0W. The screen becomes dark. From Power Management Mode, the image reappears in
several seconds when either the keyboard or the mouse are touched again.
The power management feature of this product complies with power saving requirement of VESA
DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor
when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer.
There is a power management step the monitor takes as described below. The power management
function, including any timer settings is confi gured by the operating system. Check your operating
system manual for information on how this can be confi gured.
01W 100%
POWER
CONSUMPTION
Green
Red
Power Indicator
NORMAL MODE
POWER MANAGEMENT MODE
ENGLISH
32 TROUBLE SHOOTING
The screen is not
synchronized.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.
The video output level of the computer is within the specifi cation of the monitor.
The picture does
not appear.
The Power Cable is fi rmly seated in the socket.
The Power Switch is turned ON.
The AC socket is live. Please check with another piece of equipment.
If the blank screen saver is in active mode, touch the keyboard or the mouse.
Increase the Contrast and/or Brightness.
The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.
If the monitor is in power management mode, touch the keyboard or the mouse.
The screen
position is not in
the center.
The signal timing of the computer is within the specifi cation of the monitor.
The screen is too
bright or too dark.
The screen is
shaking.
The video output level of the computer is within the specifi cation of the
monitor.
The power voltage is within the specifi cation of the monitor.
The signal timing of the computer is within the specifi cation of the monitor.
No sound.
The audio equipment (computer etc.) is ON.
The Audio Cable is properly connected.
The Volume is turned up.
The Mute is OFF.
The audio output level of the audio equipment is within the specifi cation of
the monitor.
The sound is too
loud or too quiet.
The audio output level of the audio equipment is within the specifi cation of
the monitor.
A strange noise is
heard.
The Audio Cable is properly connected.
The touch
screen shows no
response.
The USB Cable is fi rmly seated in the socket.
Touch screen driver software is installed.
The touch position
does not deviate.
The calibration function set up correctly.
TROUBLE SHOOTING
Problem Check
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem
you have. If the monitor does not get a picture, skip to 2.
2. Consult the following items if you cannot fi nd an appropriate adjustment item in OPERATING THE
MONITOR or if the problem persists.
3.
If you are experiencing a problem which is not described below or you cannot correct the problem,
discontinue using the monitor and contact your dealer or iiyama service center for further assistance.
ENGLISH
Recycling information 33
For better environment protection please don't dispose your monitor.
Please visit our web site: www.iiyama.com/recycle for monitor recycling.
RECYCLING INFORMATION
ENGLISH
34 APPENDIX
APPENDIX
Design and specifi cations are subject to change without prior notice.
SPECIFICATIONS : ProLite TF3238MSC
* USB peripherals / Audio equipment are not connected.
NOTE
Touch
Screen
Technology Projected capacitive 12points
Light transmission
84%
Hardness 7H
Thickness 3mm
Communication system
USB serial transfer
Size Category 32"
LCD
Panel
Panel technology
RGB
Size Diagonal: 32" (80cm)
Pixel pitch 0.3637mm H × 0.3637mm V
Brightness 500cd/m2 (Typical: without Touch panel)
Contrast ratio 3000 : 1 (Typical)
Viewable angle Horizontal : 178 degrees, Vertical: 178 degrees (Typical)
Response time 8ms (Gray to Gray)
Display Colors Approx.16.7M
Sync Frequency Analog: Horizontal: 30.0-83.0kHz, Vertical: 50-76Hz
Digital: Horizontal: 30.0-83.0kHz, Vertical: 23-76Hz
Maximum Resolution 1920 × 1080, 2.1 MegaPixels
Input Connector VGA, DVI-D, HDMI×2, DisplayPort
Input Audio Connector mini jack
LAN RJ45
Serial Port RS-232C In
Plug & Play VESA DDC2BTM
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal Analog: 0.7Vp-p (Standard), 75Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
Digital: HDMI, DisplayPort
Input Audio Signal 2Vrms maximum
External IR Connector
mini jack
Headphone Connector RCA(L/R)
Speakers 8W×2 (Stereo speakers)
Maximum Screen Size 698.40mm W × 392.85mm H / 27.5" W × 15.5" H
Power Source 100-240VAC, 50-60Hz, 1.2A
Power Consumption* 60W typical, Power management mode: 1.0W maximum
Energy Effi ciency Class: B
Dimensions / Net Weight 748.5 × 450.0 × 68.0mm / 29.5 × 17.7 × 2.7" (W×H×D)
14.5kg / 31.9lbs
Environmental Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
0 to 40°C / 32 to 104°F
90% (No condensation)
-20 to 60°C / 4 to 140°F
90% (No condensation)
Approvals CB, CE, CU, TÜV-Bauart, cULus
ENGLISH
APPENDIX 35
SPECIFICATIONS : ProLite TF4338MSC
* USB peripherals / Audio equipment are not connected.
NOTE
Touch
Screen
Technology Projected capacitive 12points
Light transmission
84%
Hardness 7H
Thickness 3mm
Communication system
USB serial transfer
Size Category 43"
LCD
Panel
Panel technology
RGB
Size Diagonal: 43" (108cm)
Pixel pitch 0.4902mm H × 0.4902mm V
Brightness 450cd/m2 (Typical: without Touch panel)
Contrast ratio 1100 : 1 (Typical)
Viewable angle Horizontal : 178 degrees, Vertical: 178 degrees (Typical)
Response time 12ms (Gray to Gray)
Display Colors Approx.16.7M
Sync Frequency Analog: Horizontal: 30.0-83.0kHz, Vertical: 50-76Hz
Digital: Horizontal: 30.0-83.0kHz, Vertical: 23-76Hz
Maximum Resolution 1920 × 1080, 2.1 MegaPixels
Input Connector VGA, DVI-D, HDMI×2, DisplayPort
Input Audio Connector mini jack
LAN RJ45
Serial Port RS-232C In
Plug & Play VESA DDC2BTM
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal Analog: 0.7Vp-p (Standard), 75Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
Digital: HDMI, DisplayPort
Input Audio Signal 2Vrms maximum
External IR Connector
mini jack
Headphone Connector RCA(L/R)
Speakers 8W×2 (Stereo speakers)
Maximum Screen Size 941.18mm W × 529.41mm H / 37.1" W × 20.8" H
Power Source 100-240VAC, 50-60Hz, 1.2A
Power Consumption* 75W typical, Power management mode: 1.0W maximum
Energy Effi ciency Class: A
Dimensions / Net Weight 987.5 × 587.5 × 68.0mm / 38.9 × 23.1 × 2.7" (W×H×D)
21.6kg / 47.6lbs
Environmental Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
0 to 40°C / 32 to 104°F
90% (No condensation)
-20 to 60°C / 4 to 140°F
90% (No condensation)
Approvals CB, CE, CU, TÜV-Bauart, cULus
ENGLISH
36 APPENDIX
DIMENSIONS : ProLite TF4338MSC
DIMENSIONS : ProLite TF3238MSC
748.5mm/29.5”
701.0mm/27.6”
395.5mm/15.6”
450.0mm/17.7”
581.0mm/22.9”
36.0mm/1.4”
68.0mm/2.7”
225.0mm/8.9”
330.0mm/13.0”
100.0mm/3.9”
400.0mm/15.7”
200.0mm/7.9”
400.0mm/15.7” 174.25mm/6.8”
20.0mm/0.8”
125.0mm/4.9”
174.25mm/6.8”
200.0mm/7.9”
4xM6 SCREW HOLE
(VESA MOUNT)
987.5mm/38.9”
943.5mm/37.1”
294.0mm/11.6”
672.0mm/26.5”
36.0mm/1.4”
68.0mm/2.7”
367.5mm/14.5”
100.0mm/3.9”
400.0mm/15.7”
200.0mm/7.9”
587.5mm/23.1”
531.5mm/20.9”
4xM6 SCREW HOLE
(VESA MOUNT)
400.0mm/15.7” 293.75mm/11.6”
200.0mm/7.9”
20.0mm/0.8”
193.75mm/7.6”
293.75mm/11.6”
ENGLISH
APPENDIX 37
COMPLIANT TIMING
M199A21
Video Mode Horizontal
Frequency
Vertical
Frequency Dot Clock
VESA
VGA 640 × 480 31.469kHz 59.940Hz 25.175MHz
720 × 400 31.467kHz 70.080Hz 28.320MHz
SVGA 800 × 600 37.879kHz 60.317Hz 40.000MHz
XGA 1024 × 768 48.363kHz 60.004Hz 65.000MHz
1280 × 720 44.720kHz 60.000Hz 74.500MHz
SXGA 1280 × 1024 63.981kHz 60.020Hz 108.000MHz
79.976kHz 75.025Hz 135.000MHz
WSXGA+ 1680 × 1050 65.290kHz 59.954Hz 146.250MHz
Full HD 1920 × 1080 67.500kHz 60.000Hz 148.500MHz
480p 60Hz 31.469kHz 59.940Hz 27.000MHz
576p 50Hz 31.250kHz 50.000Hz 27.000MHz
HD
720p 50Hz 37.500kHz 50.000Hz 74.250MHz
720p 60Hz 45.000kHz 60.000Hz 74.250MHz
1080p 24Hz 27.000kHz 24.000Hz 74.250MHz
1080p 30Hz 33.750kHz 30.000Hz 74.250MHz
1080p 50Hz 56.250kHz 50.000Hz 148.500MHz
1080p 60Hz 67.500kHz 60.000Hz 148.500MHz