iiyama TF5538UHSC-B2AG User Manual
Displayed below is the user manual for TF5538UHSC-B2AG by iiyama which is a product in the Signage Displays category. This manual has pages.
Related Manuals
ENGLISH
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes
to read this comprehensive manual carefully
before installing and switching on the monitor.
Please keep this manual in a safe place for
your future reference.
USER MANUAL
ENGLISH
Wereservetherighttochangespecicationswithoutnotice.
All trademarks used in this user manual are the property of their respective owners.
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the
address: http://www.iiyama.com
YoucanaccesstheWebpageofdierentcountriesfromthere.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC
Directive”, 2014/35/EU “Low Voltage Directive” and 2011/65/EU “RoHS Directive”.
Warning
This is a class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PLT4938, PLT5538
ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................ 1
SAFETY PRECAUTIONS................................................................1
SPECIAL NOTES ON LCD MONITORS .........................................3
CUSTOMER SERVICE ...................................................................5
CLEANING ......................................................................................5
BEFORE YOU OPERATE THE MONITOR ..........................................6
FEATURES......................................................................................6
CHECKING THE CONTENTS OF THE PACKAGE ........................6
SPECIAL NOTES ON TOUCH PANEL............................................7
CONTROLS AND CONNECTORS : MONITOR ..............................8
INSTALLATION ............................................................................. 11
CONTROLS : REMOTE CONTROL ..............................................13
PREPARING THE REMOTE CONTROL.......................................14
BASIC OPERATION ......................................................................15
CONNECTING YOUR MONITOR .................................................18
COMPUTER SETTING .................................................................20
OPERATING THE MONITOR .............................................................22
ADJUSTMENT MENU CONTENTS ..............................................24
SCREEN ADJUSTMENTS ............................................................29
POWER MANAGEMENT FEATURE .............................................32
TROUBLE SHOOTING ......................................................................33
RECYCLING INFORMATION .............................................................34
APPENDIX ........................................................................................35
SPECIFICATIONS : ProLite TF4938UHSC-B2AG ........................35
SPECIFICATIONS :
ProLite TF5538UHSC-B2AG / ProLite TF5538UHSC-W2AG .......37
DIMENSIONS : ProLite TF4938UHSC-B2AG ...............................39
DIMENSIONS :
ProLite TF5538UHSC-B2AG / ProLite TF5538UHSC-W2AG .......39
COMPLIANT TIMING ....................................................................40
ENGLISH
FOR YOUR SAFETY 1
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the
monitor and contact your dealer or iiyama service center immediately. Further use may be
dangerousandcancausereorelectricshock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
reorelectricshock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
anyobjectinsidemaycausere,electricshockordamage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Donotusewherewatermaybesplashedorspiltontothemonitorasitmaycausereorelectric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Besuretooperatethemonitoronlywiththespeciedpowersupply.Useofanincorrectvoltagewill
causemalfunctionandmaycausereorelectricshock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objectsonthecables.Ifdamaged,thecablesmaycausereorelectricshock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS
ENGLISH
2 FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or
smokyareasasitmaycausere,electricshockordamage.Youshouldalsoavoidareaswherethe
sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not
pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
re.Toallowadequateaircirculation,placethemonitoratleast10cm(or4inches)fromanywalls.
Operating the monitor on its back, side, upside down or on a carpet or any other soft material may
also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
Whenyoumovethemonitor,turnothepowerswitch,unplugthemonitorandbesurethesignal
cableisdisconnected.Ifyoudonotdisconnectthem,itmaycausereorelectricshock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to
avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable
itselfasthismaycausereorelectricshock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may
damage your computer.
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
Foroptimalviewingcomfort,themonitorshouldbejustbeloweyeleveland40-60cm(16-24inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
OTHERS
ENGLISH
FOR YOUR SAFETY 3
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE -WhenyourstturnontheLCDmonitor,thepicturemaynottinthedisplayarea
because of the type of computer that is used. In this case, adjust the picture position to
the correct position.
-Youmayndslightlyunevenbrightnessonthescreendependingonthedesktop
pattern you use.
- Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screenisrecoveredslowlybychangingtheimageorturningothePowerSwitchfor
hours.
SPECIAL NOTES ON LCD MONITORS
This LCD cannot be used outdoors.
If you use a cable longer than the supplied one, the picture quality is not guaranteed. Touch
function can be disrupted if the USB cable length exceeds 3m.
ENGLISH
4 FOR YOUR SAFETY
USAGE CONFIRMATION
This product is designed for optimum usage at 24hours per day.
The monitor is compatible for usage in Landscape/Portrait and Tabletop (face-up) applications. If
being used in Tabletop application, please utilise the Fan-on function.
IMAGE PERSISTENCE / IMAGE STICKING
Please be aware that all LCD screens can experience Image Persistence or Image Sticking. This
occurs when a residual image remains visible on a screen when static images are displayed for long
periods of time. LCD Image Persistence is not permanent but constant images being displayed for a
long period of time should be avoided.
To counteract Image Persistence, turn off the monitor for as long as the previous image was
displayed, so if an image was on the monitor for 1 hour and there is evidence of a residual or “ghost”
image,youshouldturnothemonitorfor1hourinordertocleartheresidualimage.
For all LFD products, iiyama recommends displaying moving images and utilising a moving screen
saveratregularintervalswheneverthescreenisidle.Youcouldalsoturnothemonitorwhennot
in use to assist the prevention.
Other waystoreducetheriskofImagePersistencewillbetoutilisetheFAN-onfunction(if
available),LowBacklightandLowBrightnesssettings.
FOR EXTENDED USE AS A PUBLIC DISPLAY
Image Sticking on LCD Panel
When a static image is displayed for hours, an electric charge trace remains near the electrode
insidetheLCDproducinga“ghost”image.(ImagePersistence).
Image Persistence is not a permanent feature.
Recommendations
To prevent Image Sticking and promote longer life expectancy of display, we recommend the
following:
1. Avoid static images displayed for long periods – change static images on continuous loop.
2.Turnomonitorwhennotinuse,eitherbyremotecontrolorusePowerManagementorSchedule
functions.
3.Whenmonitorisinstalledinhighambienttemperatureenvironment(s)orinanenclosedposition,
utilise the Cooling Fan, Screen Saver and Low Brightness functions.
4. Suitable ventilation for any monitor is an expectation of any installation – climate control systems
may need to be employed.
5. We strongly recommend utilisation of active cooling with fans for long operation times or high
ambient temperature environments.
ENGLISH
FOR YOUR SAFETY 5
NOTE
If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
WARNING
If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.
CAUTION
For safety reasons, turn o the power switch and unplug the monitor before you
clean it.
NOTE
To protect the LCD panel, do not scratch or rub the screen with a hard object.
Never use any of the following strong solvents. These will damage the cabinet and
the LCD screen.
Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
Thinner Benzine Abrasive cleaner
Spray-type cleaner Wax Acid or Alkaline solvent
CABINET Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
LCD
SCREEN
Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
CUSTOMER SERVICE
CLEANING
ENGLISH
6 BEFORE YOU OPERATE THE MONITOR
The following accessories are included in your package. Check to see if they are enclosed with
the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional
iiyamaoce.
* The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used. However, all guarantees and warranties are void for any
problems or damage caused by a power cable not supplied by iiyama.
An approved power cable greater or equal to H05VVF, 3G, 0.75mm² must be
used.
Power Cable*
HDMI Cable DisplayPort Cable
USB Cable IR Extender Cable Remote Control
Battery(2pcs) Clamper Safety Guide
Quick Start Guide
BEFORE YOU OPERATE THE MONITOR
CHECKING THE CONTENTS OF THE PACKAGE
CAUTION
FEATURES
Supports Resolutions up to 3840 × 2160
High Contrast 1100:1 (Typical) / Brightness 500cd/m2 (Typical)
Digital Character Smoothing
Automatic Set-up
Stereo Speakers
2 × 8W Stereo Speakers
Power Management (VESA DPMS Compliant)
VESA Mounting Standard (400mm×200mm) Compliant : ProLite TF4938UHSC
VESA Mounting Standard (600mm×400mm) Compliant : ProLite TF5538UHSC
Glass with AG coating
ENGLISH
BEFORE YOU OPERATE THE MONITOR 7
SPECIAL NOTES ON TOUCH PANEL
Permanent damage can occur if Sharp Edged, Pointed or Metal items are used to activate Touch.
This could invalidate any remaining warranty.
Werecommendtouseconductiverubbertiptypestylus(tipR8.0orover)ornger.
CAUTION
ENGLISH
8 BEFORE YOU OPERATE THE MONITOR
CONTROLS AND CONNECTORS : MONITOR
<Back Controller>
<Front>
Power Indicator Green Normal Operation
Orange Power Management
Power Button
Left / - Button
Right / + Button
Up Button
Down Button
MENU Menu Button
VIDEO SOURCE /
ENTER Input Select / Enter Button
ENGLISH
BEFORE YOU OPERATE THE MONITOR 9
<Back>
ProLite TF4938UHSC
ProLite TF5538UHSC
ENGLISH
10 BEFORE YOU OPERATE THE MONITOR
IR Sensor Remote Sensor
HDMI2 HDMI HDMI Connector
DVI DVI-D DVI-D Connector
HDMI1 HDMI HDMI Connector
DP DisplayPort DisplayPort Connector
VGA VGA VGA Connector
RS232C RS232C RS232C Connector
USB USB Touch USB Connector
IR Mini jack IR Connector
AUDIO IN Mini Jack Audio Input Connector
AUDIO OUT * Mini Jack Headphone connector
RJ45 RJ45 RJ45 Connector
AC-SW
(ON)/ (OFF) MAIN POWER Main Power Switch
AC IN AC-INLET ACConnector( :Alternatingcurrent)
Speakers Speakers
Handles
Handles
* Available for HDMI and DisplayPort input only.
ENGLISH
BEFORE YOU OPERATE THE MONITOR 11
INSTALLATION
CAUTION
Follow the manual instructions for the type of mount you have selected. Refer all servicing to
qualiedservicepersonnel.
Moving the monitor requires at least two people.
Before installation, please make sure the wall is strong enough to hold the necessary weight of
the monitor and the mount.
[WALL MOUNTING]
When using the wall mounting, consideration of thickness of the mounting stage needs to be taken.
Tighten the M6 Screw with washer which “L” length is 10mm to fasten the monitor. Using a screw
longer than this may cause electric shock or damage because it may contact with the electrical parts
inside the monitor.
CAUTION
L
Mounting Stage Screw
Chassis
[FAN]
If the screen is used in face-up position, please be sure to turn on the FAN function.
If you do not use the FAN, the internal temperature rises and the product life cycle may get shorter.
If the screen is built into an external cabinet, please be sure to implement a cooling unit inside of the
cabinet.
Dirt and dust may stick to the FAN, reducing the cooling eect which may result in a shorter life
cycle of the product. Please clean regularly.
CAUTION
ENGLISH
12 BEFORE YOU OPERATE THE MONITOR
[ROTATING THE MONITOR]
This monitor is designed to be compatible in landscape, portrait and face-up modes.
A
A
Not Available
A
A
Landscape
Portrait
Available
Face-up
ENGLISH
BEFORE YOU OPERATE THE MONITOR 13
CONTROLS : REMOTE CONTROL
ON/OFF Turn the monitor ON and OFF.
INPUT Select the source.
Number(1-9)/
Input source
Serve as input source buttons when
the Menu is not displayed.
(VGA/DVI/HDMI-1/HDMI-2/DP)
Number(7)/
MODE Select the Picture mode.
EXIT Return to a previous menu or closes
the OSD Menu.
Navigate through submenus and
settings.
: Up Button
: Down Button
: Left Button
: Right Button
(VOLUME-):Decrease the sound
volume.
(VOLUME+): Increase the sound
volume.
OK Conrmyourselectionorsave
changes.
INFO
• Provide source and resolution
information.
• Press and hold this button for 3
seconds to minimize the brightness.
The brightness returns to its previous
level by repeating the above button
operation again.
MENU
Open the monitor's on-screen menu
systems. When the menu system is
already open, pressing this button
will select the previous submenu.
Number(0)/
MUTE
Turnonorothemutefunction
when the Menu is not displayed.
ENGLISH
14 BEFORE YOU OPERATE THE MONITOR
To use the remote control, insert the two dry batteries.
PREPARING THE REMOTE CONTROL
CAUTION
DonotuseanyotherbatteriesotherthanthosespeciedinthismanualfortheRemoteControl.Do
not insert old and new batteries together in the Remote Control. Make sure that the terminals match
the "+" and "-" indications in the battery compartment. Burst batteries or the electrolyte from these
batteriesmaycausestains,reorinjury.
Slide back and remove the battery cover in the direction of the arrow.
Align and insert twoAAA batteries according to their plus and minus ports (as indicated in the
remotecontrol).
Replace the battery cover in the direction of the arrow and snap it back into place.
NOTE Refer to the above instructions when taking out the batteries.
Replace with new batteries when the Remote Control does not work close to the monitor.
Use AAA dry batteries. Risk of explosion if battery is replaced by an incorrect type.
Operate the Remote Control by pointing it toward the Remote Sensor on the monitor.
Other manufacturers remote control will not work with this monitor. Use the provided
Remote Control ONLY.
Usedbatteriesneededtofollowthelocalrulestobediscarded.(Suggestion:todispose
ofusedbatteriespleasefollowcorrectpolicyasperyourlocalregulations.)
Battery x 2
ENGLISH
BEFORE YOU OPERATE THE MONITOR 15
BASIC OPERATION
Turning the monitor ON
The monitor is turned On and the Power Indicator turns to Green when you press the POWER
ButtononthemonitorortheRemoteControl.ThemonitoristurnedOandthePowerIndicator
turns to Orange when you press the POWER Button on the monitor or the Remote Control.
Press again to turn On the monitor.
NOTE
Even when using the power management mode or turning OFF the Power Switch, the monitor
will consume a small amount of electricity. Disconnect the Power Cable from the power supply
whenever the monitor is not in use or during the night, to avoid unnecessary power consumption.
[Remote Control]
Display the adjustment menu page
The menu page appears on the screen when you press the MENU Button on the monitor or the
Remote Control.
The menu page disappears when you press the EXIT Button on the Remote Control again.
[Monitor]
[Remote Control][Monitor]
ENGLISH
16 BEFORE YOU OPERATE THE MONITOR
Move the cursor horizontally
Select menu or setting, or perform the adjustment by pressing the / Button while the menu
page is displayed on the screen.
Move the cursor vertically
Select adjustment by pressing the / Button while the menu page is displayed on the screen.
[Remote Control]
[Monitor]
[Remote Control]
[Monitor]
ENGLISH
BEFORE YOU OPERATE THE MONITOR 17
Adjust the volume of sound
Press the / Button to adjust the volume of sound when the menu page is not displayed on
the screen.
Switch the input signal
Press the VIDEO SOURCE Button on the monitor or INPUT Button on the Remote Control to
display the Input signal menu when the menu page is not displayed on the screen. Press the /
Button or Input source Button to switch the Input signal.
[Remote Control][Monitor]
[Remote Control][Monitor]
ENGLISH
18 BEFORE YOU OPERATE THE MONITOR
CONNECTING YOUR MONITOR
Ensurethatboththecomputerandthemonitorareswitchedo.
Connect the computer to the monitor with the signal cable.
Connect the computer to the monitor with the USB Cable.
ConnectthePowerCabletothemonitorrstandthentothepowersource.
Turnonyourmonitor(MainPowerSwitchandPowerButton)andcomputer.
The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regionaliiyamaoce.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyamaoceforasuitableadaptor.
MakesureyoutightenthengerscrewsateachendoftheSignalCable.
The touch function is ready for use about 8 seconds after connecting the USB cable and
canbeoperatedwithapen,ngeroranyotherpointer.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.
[Example of Connection]
<Back>
NOTE
*
Cable is not supplied with the monitor. If you use low quality Cable, it may cause a result of electro-
magnetic interference. Please contact the iiyama Support Centre in your country if you wish to connect
the monitor via the VGA or DVI input.
Router
Computer
AV Equipment
VGA Cable (Not Included)*
HDMI Cable (Accessory)
Power Cable (Accessory)
USB Cable (Accessory)
Audio Cable (Not Included)
HDMI Cable (Not Included)
DisplayPort Cable (Accessory)
RS-232C Cable (Not Included)
IR Extender Cable (Accessory)
LAN(RJ45) Cable (Not Included)
DVI-D Cable (Not Included)*
ENGLISH
BEFORE YOU OPERATE THE MONITOR 19
[ Network Connection ]
Connecting to a LAN
To set the monitor to connect to a local area network.
1. Connect a RJ45 cable to the corresponding ports on the monitor and your LAN switch or router.
2. Enter the OSD menu Setting > Control Setting. Select LAN.
3. Enter the next OSD menu Setting > Network Settings > IP Address DHCP or Manual
Setup
• If you are in a DHCP environment, highlight Auto Setup and select On. Once done, the IP
Address, Subnet Mask, Default Gateway, and Primary DNS settings will be displayed.
• If you are not in a DHCP environment, highlightAuto Setup and select O. Contact your ITS
administrator for information on the IP Address, Subnet Mask, Default Gateway, and Primary
DNS settings and enter it accordingly.
Controlling the Monitor
Once you have the correct IP Address for your monitor and the monitor is on or in standby mode,
you can use any computer that is on the same local area network to control the monitor.
• You can not control the monitor via the RS-232C connector when LAN control is in use.
• It is recommended that you use Google Chrome versions 51.0.2704.103 or higher
browser.
1. Enter the IP Address of the monitor in the address bar of your browser and press ENTER
button.
2. The setting page appears.
INFORMATION / PICTURE&SOUND / SCREEN / SETTING / SCHEDULE / NETWORK
NOTE
ENGLISH
20 BEFORE YOU OPERATE THE MONITOR
Signal Timing
Change to the desired signal timing listed on page 40: COMPLIANT TIMING.
Windows XP/Vista/7/8/8.1/10 Plug & Play
The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs
on Windows XP/Vista/7/8/8.1/10 by connecting the monitor to DDC2B compliant computer with
the Signal Cable supplied.
For installation on Windows XP: The monitor Information File for iiyama monitors may be
necessary for your computer and obtained via the Internet, using the address:
http://www.iiyama.com
For additional information on how to download the driver for your touch screen monitor,
please access the internet site noted above.
Monitor Drivers are not required in most cases for Macintosh or Unix operating
systems.Forfurtherinformation,pleasecontactyourcomputerdealerrstforadvice.
COMPUTER SETTING
NOTE
Procedure for turning ON the Power Switch
TurnONthemonitorrst,andthenthecomputer.
ENGLISH
BEFORE YOU OPERATE THE MONITOR 21
MULTI-TOUCH :
ThismonitorcomplieswithDDC2BofVESAstandard.(Plug&playcompliant)
The MULTI-TOUCH function runs on Windows7/8/8.1/10 by connecting the monitor to DDC2B
compliant computer with the USB cable supplied.
TOUCH support operation system :
OS Version
(Windows)
Windows
Win 10 Win8 Win7 XP
Supported touches multi-touch
Note Windows inbox driver
(NoNeedSiSdriver) Single-touch
OS Version
(LinuxDistribution)
Android
Linux7.0 6.0 5.0 ~ 5.1 4.0 ~ 4.4
Supported touches multi-touch
Supported Kernel
version 4.4 3.18 3.0~3.14 3.0~4.4
Note Driver supports multi-touch
OS Version
(MacOS)
Mac OS
10.9(Mavericks) 10.10(Yosemite) 10.11
(ElCapitan)
10.12(Sierra)
10.13(HighSierra)
Supported touches Single-touch
Note
Similar to Apple
Trackpad gesture:
2-ngergesture:
zoom in/out, swipe
4-ngergesture:
show desktop
Similar to Apple
Trackpad gesture:
2-ngergesture:
zoom in/out, swipe
4-ngergesture:
show desktop
Our service team
provides you with
the driver and the
operation guide.
Similar to Apple
Trackpad gesture:
2-ngergesture:
zoom in/out, swipe
4-ngergesture:
show desktop
Our service team
provides you with
the driver and the
operation guide.
Our service team
provides you with
the driver and the
operation guide.
ENGLISH
22 OPERATING THE MONITOR
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 40. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 29 for SCREEN ADJUSTMENTS.
Press the MENU button to start the On Screen Display feature. There are additional
Menu items which can be switched by using the / buttons.
Select the Menu item of the adjustment you want to make. Press the OK button on
the remote control or ENTER button on the monitor and enter the menu page. Then,
use the / buttons to highlight the desired adjustment item.
Press the OK button on the remote control or ENTER button on the monitor again.
Use the / buttons to make the appropriate adjustment or setting.
Press the EXIT button to leave the menu, and the settings you just made would be
automatically saved.
The EXIT button on the remote control can be used to return previous menu item.
Any changes are automatically saved in the memory when the On Screen Display
disappears.
TurningothepowershouldbeavoidedwhileusingtheMenu.
Adjustments for Image Position, Clock Frequency and Phase are saved for each signal timing.
Except for these adjustments, all other adjustments have only one setting which applies to all
signal timings.
NOTE
For example, to correct for vertical position, select Menu item of Screen. Select "Screen" by
using the / buttons. Press the OK button on the remote control. Next, select "Adjust
Screen" by using the / buttons. Press the OK button on the remote control. Then, select
"V. Position" by using the / buttons.
Use the / buttons to change the vertical position settings. The vertical position of the
overall display should be changing accordingly while you are doing this.
Press the EXIT button on the remote control lastly, it ends, all changes are saved in the memory.
Picture
Move Enter
ENTER
/OK EXIT
Exit
Picture Mode
Backlight
Contrast
Brightness
Chroma
Phase
Sharpness
Color Temp.
Reset
Standard
100
80
50
50
50
5
Custom
Network Settings
Control SettingRS-232C
1DI rotinoM teS
Energy Saving Settings
Aspect Full
Freeze Off
Setting
hsilgnEegaugnaL
VGA Settings
VGA Settings
Phase
Auto Adjustment
H. Position
Clock Frequency
V. Position
Screen
Move Enter
ENTER
/OK EXIT
Exit
Aspect
Touch Feature
Normal
Off
Adjust Screen
Screen
Move Enter
ENTER
/OK EXIT
Exit
Phase
Clock Frequency
34
0
50
H. Position
Auto Adjustment
50
V. Position
ENGLISH
OPERATING THE MONITOR 23
[LOCK MODE]
Back Controller Button:
Pressing and holding the MENU and buttons for about 5 seconds, will lock/unlock the Back
Controller Button Lock function.
Power Button:
Pressing and holding the MENU and ENTER buttons for about 5 seconds, will lock/unlock the
Power Button Lock function.
Remote Control Button:
Pressing and holding the MENU and buttons for about 5 seconds, will lock/unlock the Remote
Control Button Lock function.
* Available Back Controller only.
PALM REJECTION FUNCTION:
Palmrejectionisawaytodisregardtouchmadewith“alargecontactarea”whilengermodes.
Alargecontactarea:palm,clenchedst,elbow,arm,etc.
When you touch the screen with a nger, palm rejection is activated and the screen does not
recognize touch made with the large contact area.
ENGLISH
24 OPERATING THE MONITOR
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option Button to Press
Too dark
Too bright
Brightness*1,3
Contrast*3Too dull
Too intense
Picture Mode*3
Custom
Vivid
Cinema
Standard
Displays a picture on a screen set by Image
Settings adjustments.
For displaying outdoor scenery images.
For movie and video environment.
For general windows environment and monitor
default setting.
Sharpness Too soft
Too sharp
Chroma*2Too weak
Too strong
Backlight Brightness of back light is reduced.
Picture
Too weak
Too strong
Custom
R
G
B
Neutral
Warm
Cool
Color Temp.*3
Phase Purplish
Greenish
Picture
Move Enter
ENTER
/OK EXIT
Exit
Picture Mode
Backlight
Contrast
Brightness
Chroma
Phase
Sharpness
Color Temp.
Reset
Standard
100
80
50
50
50
5
Custom
Neutral color
Warm color
Cool color
Reset Resets all settings in the Picture menu.
*1
Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright.
*2 Only HDMI and DisplayPort inputs.
*3 Contrast, Brightness, Color Temp. and Picture Mode cannot be adjusted and selected while Adv.
Contrast is active.
Cancel
OK
Return to Menu.
ENGLISH
OPERATING THE MONITOR 25
Adjustment Item Problem / Option Button to Press
Audio Source Audio-In Select the Line-In input.
Sound
Auto Select the audio input automatically.
Balance Left side speaker louder
Right side speaker louder
Treble Too weak
Too strong
Volume
Bass Too weak
Too strong
Too soft
Too loud
Mute O
On Turnothesoundtemporarily.
Return the sound volume to the previous level.
Speaker Line-out *
Internal Select the Internal Speaker.
Select the External Speaker or Headphone.
Reset Resets all settings in the Sound Settings menu.
Sound
Move Enter
ENTER
/OK EXIT
Exit
Treble
Bass
Balance
Volume
Mute
Speaker
Audio Source
Reset
Off
0
Center
50
0
Internal
Audio In
Cancel
OK
Return to Menu.
* Available for HDMI and DisplayPort input only.
ENGLISH
26 OPERATING THE MONITOR
Aspect*5
Auto
Adjustment*4Adjusts Position, Clock Frequency and Phase
automatically.
Clock
Frequency
Too narrow
Too wide
Phase Tocorrectickeringtextorlines
H. Position Too far to the left
Too far to the right
Too low
Too high
V. Position
Adjustment Item Problem / Option Button to Press
Screen
4:3*1
Real*2
Displays all picture in 4:3 aspect ratio.
Displays the picture dot by dot.
Adjust Screen*3
Normal*2Enlargesthepicturetollthescreeninthevertical
direction, keeping the same aspect ratio.
16:10*1Displays all picture in 16:10 aspect ratio.
5:4*1Displays all picture in 5:4 aspect ratio.
Touch Feature On
O Return to Menu.
Enable the touch function.
Display wall will be disabled to optimize
touch performance.
NOTE
*1OnlyHDMI(Video)andDisplayPortinputs.
*2OnlyVGAandHDMI(PC)inputs.
*3 Only VGA input.
*4 For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 29 for
SCREEN ADJUSTMENTS.
*5 If the Touch Feature is enabled, this feature is not available.
Screen
Move Enter
ENTER
/OK EXIT
Exit
Aspect
Adjust Screen
Touch Feature
Normal
Off
Cancel
OK
Return to Menu.
ENGLISH
OPERATING THE MONITOR 27
Adjustment Item Problem / Option Button to Press
Language
Setting
English
Deutsch
English
German
Français French
Russian
Polski Polish
Power Save *2
Low
O PowerSaveisturnedo.
Dutch Nederlands
All input sources can activate entering the
power saving mode, but only the VGA signal
can deactivate it. If an another input source
is connected you have to press the POWER
button.
Control Setting RS-232C
LAN
O
Selects the RS-232C to control the monitor.
Selects this option to control the monitor via LAN.
Network Settings *6
Once you are connected, the IP
Address, Subnet mask, Default
gateway, Primary DNS and Secondary
DNS settings are displayed
automatically.
DHCP
Manual
If you are not connected, contact your IT
administrator for information on the
IP Address,
Subnet mask, Default gateway,
Primary DNS
and
Secondary DNS
settings and enter them
accordingly.
Italian Italiano
Schedule
Today *1Displays the current date and time.
Year/Month/Day/Hour/Minute
Time set / Date set
Setswhentoturnonorothemonitor.
O/On(DateSet/Input/OnTimer/OTimer)
Clock Display On
O
Displays time.
ClockDisplayisturnedo.
On/OTimer
Control Settingisturnedo.
Cancel
Execute
Return to Menu.
Setting
Move Enter
ENTER
/OK EXIT
Exit
Language
Schedule
Power Save
English
Off
Control Setting
Network Settings
Advanced
Information
All Reset
Off
Advanced
Auto Search Automatically detects available input
sources.
Auto
Adjustment *3Adjusts Position, Clock Frequency
and Phase automatically.
On
O Auto Searchisturnedo.
On
O Auto Adjustmentisturnedo.
Español Spanish
ENGLISH
28 OPERATING THE MONITOR
*1 Youmustsetthisitemwhenusing"On/OTimer".
*2 RS-232C can bring any mode out of the power saving status.
*3 For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 29 for
SCREEN ADJUSTMENTS.
*4 If the screen is used in face-up position, please be sure to turn on the FAN function.
*5 IP adress is displayed only when LAN is connected.
*6 It can be used when LAN of Control Setting is selected.
Adjustment Item Problem / Option Button to Press
Setting
Anti Image
Retention
The fan turns on automatically when the
monitor's internal temperature reaches
60°C or higher.
OSD Info Box
OSDInfoBoxisturnedo.
Switching signal inputs, or changing timing,
the current input source and resolution
information will be displayed on the screen.
On
O
OSD Rotation
On
O
Landscape
Portrait Portrait display
Landscape display
See your graphic card user guide for more information about
changing the resolution and refresh.
Model Name/Operation Time/Software Version/LAN Version/IP Address*5
NOTEInformation
All Reset Factory-preset data is restored.
OK
Cancel Return to Menu.
Opening Logo
On
O
iiyama Logo displayed when the monitor is
turned on.
iiyama Logo does not display when the
monitor is turned on.
Advanced
Adv. Contrast Increased Contrast Ratio
On
O Typical Contrast Ratio
DP
Fan *4
O
On Fan is turned on.
Auto
Fanisturnedo.
Dot Wash Dotwashisturnedo.
White Wash
To prevent burn-in, set the display time of all
white pattern after Sleep mode with no signal.
O/15min/30min
Setting
Move Enter
ENTER
/OK EXIT
Exit
Language
Schedule
Power Save
English
Off
Control Setting
Network Settings
Advanced
Information
All Reset
Off
Draw a 4
×
4 pixel block on the screen.
Set the version of the DisplayPort.
1.1 / 1.2
ENGLISH
OPERATING THE MONITOR 29
SCREEN ADJUSTMENTS
The screen adjustments described in this manual are designed to set image position and minimize
ickerorblurfortheparticularcomputerinuse.
The monitor is designed to provide the best performance at resolution of 1920 × 1200, but can not
provide the best at resolutions of less than 1920 × 1200 because the picture is automatically stretched
totthefullscreen.Itisrecommendedtooperateatresolutionof1920×1200innormaluse.
Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to
the screen enlargement process.
It is preferable to adjust the image position and frequency with the monitor controls, rather than
the computer software or utilities.
Perform adjustments after a warm-up period of at least thirty minutes.
Additional adjustments may be required after the Auto Adjust depending on the resolution or signal timing.
The Auto Adjust may not work correctly when displaying the picture other than the screen
adjustment pattern. In this case, manual adjustments are required.
There are two ways to adjust the screen. One way is automatic adjustment for Position, Clock
Frequency and Phase. The other way is performing each adjustment manually.
Perform the Auto Adjust first when the monitor is connected to a new computer, or resolution is
changed.Ifthescreenhasaickerorblur,orthepicturedoesnottinthedisplayareaafterperforming
the Auto Adjust, manual adjustments are required. Both adjustments should be made by using the
screenadjustmentpattern(Test.bmp)obtainedviatheIIYAMAwebsite(http://www.iiyama.com).
Adjust the image by following the procedure below to get the desired picture.
This manual explains adjustment under Windows® OS.
Display the picture at the optimum resolution.
Enter the Test.bmp (screen adjustment pattern) to wallpaper.
Consult the appropriate documentation for doing this.
Set the display position to center in the wallpaper setting dialogue box.
[Adjustment pattern]
Zebra pattern
Color bar
Picture frame
NOTE
Adjust the image by following the procedure below to get the desired picture when selecting Analog input.
ENGLISH
30 OPERATING THE MONITOR
1) Adjust the H-Position so that the left side of the picture frame will move to the left edge
of the display area.
When the left side of the picture frame moves apart from the left edge of the display
areaduringtheClockFrequencyadjustment,adjuststeps1)and2).
Another way to make the Clock Frequency adjustment is to correct the vertical wavy
lines in the zebra pattern.
ThepicturemayickerduringtheClockFrequency,H/V-Positionadjustment.
In case the picture frame is bigger or smaller than the data display area after the
Clock Frequency adjustment, repeat steps from .
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the Clock Frequency.
Adjust the Auto Adjustment.
Adjust the image manually by following procedure below when the screen has a icker or
blur, or the picture does not t in the display area after performing the Auto Adjust.
Adjust the V-Position so that the top and bottom of the picture frame will t to the display
area.
NOTE
ENGLISH
OPERATING THE MONITOR 31
Incasethestrongickerorblursremainonapartofthescreen,repeatsteps and
becausetheClockFrequency maynotbeadjustedcorrectly.Iftheickerorblursstill
remain,settherefreshrateofcomputertolow(60Hz)andrepeatstepsfrom again.
Adjust the H-Position after the Phase adjustment if the horizontal position moves
during the adjustment.
Adjust the Brightness and Color to get the desired picture after you complete the Clock
Frequency and Phase adjustments.
Put back your favorite wallpaper.
Adjust the Phase to correct horizontal wavy noise, icker or blur in the zebra pattern.
NOTE
ENGLISH
32 OPERATING THE MONITOR
Even when using the power management mode, the monitor consumes electricity. Turn
othePowerSwitchwheneverthemonitorisnotinuse,duringthenightandweekends,
to avoid unnecessary power consumption.
It is possible that the video signal from the computer may be on while the H or V sync
signal is missing. In this instance, the POWER MANAGEMENT feature may not work
properly.
NOTE
POWER MANAGEMENT FEATURE
Power Management Mode
When the H-sync signal / V-sync signal / H and V sync signals from the computer are o, the
monitor enters into Power Management Mode which reduces the power consumption to less
than 1.0W. The screen becomes dark, and the power indicator turns to orange. From Power
Management Mode, the image reappears in several seconds when either the keyboard or the
mouse are touched again.
The power management feature of this product complies with power saving requirement of VESA
DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor
when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer.
There is a power management step the monitor takes as described below. The power management
function,includingany timersettingsiscongured bytheoperatingsystem.Check youroperating
systemmanualforinformationonhowthiscanbecongured.
0 1.0W 100%
POWER
CONSUMPTION
Green
Orange
Power Indicator
NORMAL MODE
POWER MANAGEMENT MODE
ENGLISH
TROUBLE SHOOTING 33
The screen is not
synchronized.
The Signal Cable is properly connected.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
Thevideooutputlevelofthecomputeriswithinthespecicationofthemonitor.
The picture does
not appear.
The screen
position is not in
the center.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
The screen is too
bright or too dark.
The screen is
shaking.
The video output level of the computer is within the specication of the
monitor.
Thepowervoltageiswithinthespecicationofthemonitor.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
No sound.
Theaudioequipment(computeretc.)isON.
The Audio Cable is properly connected.
The Volume is turned up.
The Mute is OFF.
Theaudiooutputleveloftheaudioequipmentiswithinthespecicationof
the monitor.
The sound is too
loud or too quiet.
Theaudiooutputleveloftheaudioequipmentiswithinthespecicationof
the monitor.
TROUBLE SHOOTING
Problem Check
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem
you have. If the monitor does not get a picture, skip to 2.
2.ConsultthefollowingitemsifyoucannotndanappropriateadjustmentiteminOPERATINGTHE
MONITOR or if the problem persists.
3.
If you are experiencing a problem which is not described below or you cannot correct the problem,
discontinue using the monitor and contact your dealer or iiyama service center for further assistance.
ThePowerCableisrmlyseatedinthesocket.
The Power Switch is turned ON.
The AC socket is live. Please check with another piece of equipment.
If the blank screen saver is in active mode, touch the keyboard or the mouse.
Increase the Contrast and/or Brightness.
The computer is ON.
The Signal Cable is properly connected.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
If the monitor is in power management mode, touch the keyboard or the mouse.
The computer is ON.
The Signal Cable is properly connected.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
(Powerindicator
isorange.)
(Powerindicator
isgreen.)
(Powerindicator
doesnotlightup.)
ENGLISH
34 TROUBLE SHOOTING / RECYCLING INFORMATION
For better environment protection please don't dispose your monitor.
Please visit our web site: www.iiyama.com for monitor recycling.
RECYCLING INFORMATION
A strange noise is
heard.
The Audio Cable is properly connected.
The touch
screen shows no
response.
TheUSBCableisrmlyseatedinthesocket.
Touch screen driver software is installed.
The touch position
does not deviate.
The calibration function set up correctly.
Problem Check
ENGLISH
APPENDIX 35
APPENDIX
Designandspecicationsaresubjecttochangewithoutpriornotice.
SPECIFICATIONS : ProLite TF4938UHSC-B2AG
* USB peripherals / Audio equipment are not connected.NOTE
Touch
Screen
Technology Projected capacitive 15points
Light transmission
84%
Hardness 7H
Thickness 4mm
Communication system
USB serial transfer
Size Category 49"
LCD
Panel
Panel technology
IPS
Size Diagonal:49"(123cm)
Pixel pitch 0.27963mm H × 0.27963mm V
Brightness 500cd/m2(Typical)
420cd/m2(withTouchpanel)
Contrast ratio 1100:1(Typical)
Viewable angle Horizontal:178degrees,Vertical:178degrees(Typical)
Response time 8ms(GraytoGray)
Pixel format 3840(H),2160(V)Pixels
Display Colors Approx.16.7M
Sync Frequency
VGA: Horizontal: 30.0-83.0kHz, Vertical: 50-76Hz
DVI/HDMI2: Horizontal: 30.0-83.0kHz, Vertical: 23-76Hz
HDMI1/DisplayPort: Horizontal: 30.0-135.0kHz, Vertical: 23-76Hz
Supported max. resolution
VGA/
DVI
: 1920 × 1200, 60Hz
HDMI1/DisplayPort: 3840 × 2160, 60Hz
HDMI2: 3840 × 2160, 30Hz
Input Connector VGA, DVI-D, HDMI×2, DisplayPort
Input Audio Connector mini jack
LAN RJ45
Serial Port RS-232C In
Plug & Play VESA DDC2BTM
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal
Analog:0.7Vp-p(Standard),75Ω, Positive
Digital:DVI(DigitalVisualInterfaceStandardRev.1.0)compliance
Digital: HDMI1, HDMI2, DisplayPort
Input Audio Signal 2Vrms maximum
External IR Connector
mini jack
Headphone Connector mini jack
Speakers 8W×2(Stereospeakers)
Maximum Screen Size 1073.8mm W × 604.0mm H / 42.3" W × 23.8" H
Power Source 100-240VAC, 50-60Hz, 1.75A
Power Consumption* 135W typical, Power management mode: 1.0W maximum
EnergyEciencyClass:C
ENGLISH
36 APPENDIX
Dimensions / Net Weight 1154.0×684.0×73.5mm/45.4×26.9×2.9"(W×H×D)
33.3kg / 73.4lbs
Environmental Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
0 to 40°C / 32 to 104°F
10to90%(Nocondensation)
-20 to 60°C / 4 to 140°F
10to90%(Nocondensation)
Approvals CE, EAC, TÜV-Bauart, cULus
ENGLISH
APPENDIX 37
SPECIFICATIONS : ProLite TF5538UHSC-B2AG /
ProLite TF5538UHSC-W2AG
* USB peripherals / Audio equipment are not connected.NOTE
Touch
Screen
Technology Projected capacitive 15points
Light transmission
84%
Hardness 7H
Thickness 4mm
Communication system
USB serial transfer
Size Category 55"
LCD
Panel
Panel technology
IPS
Size Diagonal:55"(139cm)
Pixel pitch 0.315mm H × 0.315mm V
Brightness 500cd/m2(Typical)
420cd/m2(withTouchpanel)
Contrast ratio 1100:1(Typical)
Viewable angle Horizontal:178degrees,Vertical:178degrees(Typical)
Response time 8ms(GraytoGray)
Pixel format 3840(H),2160(V)Pixels
Display Colors Approx.16.7M
Sync Frequency
VGA: Horizontal: 30.0-83.0kHz, Vertical: 50-76Hz
DVI/HDMI2: Horizontal: 30.0-83.0kHz, Vertical: 23-76Hz
HDMI1/DisplayPort: Horizontal: 30.0-135.0kHz, Vertical: 23-76Hz
Supported max. resolution
VGA/
DVI
: 1920 × 1200, 60Hz
HDMI1/DisplayPort: 3840 × 2160, 60Hz
HDMI2: 3840 × 2160, 30Hz
Input Connector VGA, DVI-D, HDMI×2, DisplayPort
Input Audio Connector mini jack
LAN RJ45
Serial Port RS-232C In
Plug & Play VESA DDC2BTM
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal
Analog:0.7Vp-p(Standard),75Ω, Positive
Digital:DVI(DigitalVisualInterfaceStandardRev.1.0)compliance
Digital: HDMI1, HDMI2, DisplayPort
Input Audio Signal 2Vrms maximum
External IR Connector
mini jack
Headphone Connector mini jack
Speakers 8W×2(Stereospeakers)
Maximum Screen Size 1209.6mm W × 680.4mm H / 47.6" W × 26.8" H
Power Source 100-240VAC, 50-60Hz, 1.9A
Power Consumption* 155W typical, Power management mode: 1.0W maximum
EnergyEciencyClass:B
Dimensions / Net Weight 1294.5×765.5×68.0mm/51.0×30.1×2.7"(W×H×D)
41.0kg / 90.4lbs
ENGLISH
38 APPENDIX
Environmental Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
0 to 40°C / 32 to 104°F
10to90%(Nocondensation)
-20 to 60°C / 4 to 140°F
10to90%(Nocondensation)
Approvals CE, EAC, TÜV-Bauart, cULus
ENGLISH
APPENDIX 39
DIMENSIONS : ProLite TF5538UHSC-B2AG /
ProLite TF5538UHSC-W2AG
DIMENSIONS : ProLite TF4938UHSC-B2AG
672.0mm/26.5”
600.0mm/23.6” 277.5mm/10.9”
400.0mm/15.7”
367.5mm/14.5”
24.0mm/0.9”
1076.0mm/42.4”
1154.0mm/45.4”
342.0mm/13.5”
606.5mm/23.9”
684.0mm/26.9”
200.0mm/7.8”
400.0mm/15.7”
100.0mm/3.9”
377.0mm/14.8”
242.0mm/9.5”
4xM6 SCREW HOLE
(VESA MOUNT)
41.5mm/1.6”
73.5mm/2.9”
82.5mm/3.2”
771.0mm/30.4”
600.0mm/23.6” 347.5mm/13.7”
38.0mm/1.5”
68.0mm/2.7”
79.0mm/3.1”
382.5mm/15.1”
1212.0mm/47.7”
1294.5mm/51.0”
683.0mm/26.9”
765.5mm/30.1”
400.0mm/15.7”
24.0mm/0.9”
490.0mm/19.3”
200.0mm/7.8”
600.0mm/23.6”
400.0mm/15.7”
347.5mm/13.7”
182.5mm/7.2”
4xM6 SCREW HOLE
(VESA MOUNT)
ENGLISH
40 APPENDIX
COMPLIANT TIMING
M199A25
Video Mode Horizontal
Frequency
Vertical
Frequency Dot Clock
VESA
VGA 640 × 480 31.469kHz 59.940Hz 25.175MHz
720 × 400 31.467kHz 70.080Hz 28.320MHz
SVGA 800 × 600 37.879kHz 60.317Hz 40.000MHz
XGA 1024 × 768 48.363kHz 60.004Hz 65.000MHz
1280 × 720 44.720kHz 60.000Hz 74.500MHz
SXGA 1280 × 1024 63.981kHz 60.020Hz 108.000MHz
79.976kHz 75.025Hz 135.000MHz
WSXGA+ 1680 × 1050 65.290kHz 59.954Hz 146.250MHz
Full HD 1920 × 1080 67.500kHz 60.000Hz 148.500MHz
WUXGA 1920 × 1200 74.038kHz 59.950Hz 154.000MHz
UHD 3840 × 2160 67.430kHz 29.970Hz 296.700MHz *1
133.313kHz 59.997Hz 533.250MHz *2
SD 480p 60Hz 31.469kHz 59.940Hz 27.000MHz *1
576p 50Hz 31.250kHz 50.000Hz 27.000MHz *1
HD
720p 50Hz 37.500kHz 50.000Hz 74.250MHz *1
720p 60Hz 45.000kHz 60.000Hz 74.250MHz *1
1080p 24Hz 27.000kHz 24.000Hz 74.250MHz *1
1080p 30Hz 33.750kHz 30.000Hz 74.250MHz *1
1080p 50Hz 56.250kHz 50.000Hz 148.500MHz *1
1080p 60Hz 67.500kHz 60.000Hz 148.500MHz *1
*1 HDMI1/HDMI2/DisplayPort input only.
*2 HDMI1/DisplayPort input only.