iiyama X1670HC-B1 User Manual
Displayed below is the user manual for X1670HC-B1 by iiyama which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
ENGLISH
USER MANUAL
Thank you very much for choosing the
iiyama LCD monitor.
We recommend that you take a few
minutes to read carefully through
this brief but comprehensive manual
before installing and switching on the
monitor. Please keep this manual in a
safe place for your future reference.
ENGLISH
Wereservetherighttochangespecicationswithoutnotice.
All trademarks used in this user manual are the property of their respective owners.
Eprel registration number X1670HC-B1 : 397558
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the address:
http://www.iiyama.com
YoucanaccesstheWebpageofdierentcountriesfromthere.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC
Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU
“RoHS Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in
residential areas, business and light industrial premises and small-scale enterprises, inside as
well as outside of the buildings. All places of operation are characterised by their connection to
the public low voltage power supply system.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PL1670HC
ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................ 1
SAFETY PRECAUTIONS................................................................1
SPECIAL NOTES ON LCD MONITORS .........................................3
CUSTOMER SERVICE ...................................................................3
CLEANING ......................................................................................3
BEFORE YOU OPERATE THE MONITOR ..........................................4
FEATURES......................................................................................4
CHECKING THE CONTENTS OF THE PACKAGE ........................4
CONTROLS AND CONNECTORS..................................................5
CONNECTING YOUR MONITOR ..................................................6
COMPUTER SETTING ...................................................................7
ADJUSTING THE VIEWING ANGLE ..............................................7
OPERATING THE MONITOR ...............................................................8
ADJUSTMENT MENU CONTENTS ................................................9
STANDBY FEATURE ....................................................................14
TROUBLE SHOOTING ......................................................................15
RECYCLING INFORMATION .............................................................16
APPENDIX ........................................................................................17
SPECIFICATIONS ......................................................................... 17
DIMENSIONS ................................................................................ 18
COMPLIANT TIMING ....................................................................18
ENGLISH
FOR YOUR SAFETY 1
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR IF YOU ARE AWARE OF ANY PROBLEMS
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the
monitor and contact your dealer or iiyama service center immediately. Further use may be
dangerousandcancausereorelectricshock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
reorelectricshock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
anyobjectinsidemaycausere,electricshockordamage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Donotusewherewatermaybesplashedorspiltontothemonitorasit maycausereorelectric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Besuretooperatethemonitoronlywiththespeciedpowersupply.Useofanincorrectvoltagewill
causemalfunctionandmaycausereorelectricshock.
PROTECT THE CABLES
Do not pull or bend the cables. Do not place the monitor or any other heavy objects on the cables. If
damaged,thecablesmaycausereorelectricshock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS
ENGLISH
2 FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or
smokyareasasitmaycausere,electricshockordamage.Youshouldalsoavoidareaswherethe
sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not
pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
re.Toallowadequateaircirculation,placethemonitoratleast10cm(or4inches)fromanywalls.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
Whenyoumovethemonitor,turnothe powerswitch,unplugthemonitorandbesurethesignal
cableisdisconnected.Ifyoudonotdisconnectthem,itmaycausereorelectricshock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the cables, always pull it by the plug. Never pull on the cable itself as this may cause
reorelectricshock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may
damage your computer.
CAREFUL! PROTECT YOUR HANDS AND FINGERS
Becarefulnottohurtyourngersorhandswhenyouchangetheheightortheangle.
Injurycanoccurifcareisnottakentoavoidngercontactwiththedisplaysbasewhenadjusting
theheight.(Justforheightadjustablemodel.)
REMARK FOR 24/7 USAGE
Thisproductisnotspecicallydesignedfor24/7usageinallenvironments.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
Foroptimalviewingcomfort,themonitorshouldbejustbeloweyeleveland40-60cm(16-24inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
ENGLISH
FOR YOUR SAFETY 3
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE
When you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture position to
the correct position.
Youmayndslightlyunevenbrightnessonthescreendependingonthedesktoppattern
you use.
Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screencanberecoveredslowlybychangingtheimageorturningothePowerSwitch
for some hours.
SPECIAL NOTES ON LCD MONITORS
If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or replacement
packaging.
WARNING
If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.
CAUTION
For safety reasons, turn o the power switch and unplug the monitor before you
clean it.
To protect the LCD panel, do not scratch or rub the screen with a hard object.
Never use any of the following strong solvents. These will damage the cabinet and
the LCD screen.
Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
Thinner
Benzine
Abrasive cleaner
Spray-type cleaner
Wax
Acid or Alkaline solvent
CABINET Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
LCD
SCREEN
Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
CUSTOMER SERVICE
CLEANING
NOTE
NOTE
ENGLISH
4 BEFORE YOU OPERATE THE MONITOR
The following accessories are included in your package. Check to see if they are enclosed with
the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional
iiyamaoce.
BEFORE YOU OPERATE THE MONITOR
CHECKING THE CONTENTS OF THE PACKAGE
FEATURES
Supports Resolutions up to 1920 × 1080
High Contrast 800:1 (Typical), Adv. Contrast Function Available / Brightness
220cd/m2 (Typical)
Blue Light Reducer
Digital Character Smoothing
Standby Feature (VESA DPMS Compliant)
* All guarantees and warranties are void for any problems or damage caused by a
USB-C cable not supplied by iiyama.
USB-C Cable *
Safety Guide
Quick Start Guide
Carrying bag
CAUTION
ENGLISH
BEFORE YOU OPERATE THE MONITOR 5
CONTROLS AND CONNECTORS
Power Indicator
Blue: Normal operation
Orange: Standby mode
PowerSwitch()
MenuButton(MENU)
Scrollup/ECOModeButton( )
Scrolldown/i-StyleColorButton( )
ExitButton(EXIT)
USBConnector(MICROUSB,DC-IN)
USBConnector(USB-C,INPUT/DC-IN)
Stand
<Front> <Back>
NOTE
: Direct current
ENGLISH
6 BEFORE YOU OPERATE THE MONITOR
CONNECTING YOUR MONITOR
Ensurethatboththenotebookandthemonitorareswitchedo.
Connect the notebook to the monitor with the USB-C Cable.
ConnecttheMicroUSBCableandACadaptertothemonitorrstandthentothepowersource
whensupplyingpowerfromanoutlet.(WhenusingACadapterandMicroUSBcable)
Turn on your monitor and notebook.
[Example of Connection]
<Back>
MICRO USB Cable
(Not included)
Notebook
USB-C Cable*
(Accessory)
AC adapter
(Not included)
or
Smartphone
Depending on the type of USB-C connector, your monitor may not have enough power
supply from your computer, even with a USB-C cable attached. In that case, purchase a
commercially available Micro USB cable and AC adapter which complies with the limited
power source before use.
Specication Input: 100-240V , 50/60Hz, 0.3A Output: 5Vdc, 2A
NOTE
* Check the user manual of your device if it supports video over USB-C.
ENGLISH
BEFORE YOU OPERATE THE MONITOR 7
Signal Timing
Change to the desired signal timing listed on page 18: COMPLIANT TIMING.
COMPUTER SETTING
For optimal viewing it is recommended to look at
the full face of the monitor.
You are able to adjust the monitor’s angle up to
15 - 35 degrees upward.
Put a piece of soft cloth on the table beforehand
to prevent the monitor from being scratched. Lay
themonitoratonatablewithfrontfacedown.
Hold the monitor and pull the stand up until you
hear a click.
Stand the monitor in the upright position. Adjust
the screen tilt to your preference.
NOTE Do not touch the LCD screen when
you change the angle. It may cause
damage or break the LCD screen.
Careful attention is required not to
pinch your fingers or hands into the
moving part of the stand when you
change the angle.
When packaged, the stand is folded.
Do not use in this state otherwise injury
may occur if it falls or is dropped.
ADJUSTING THE VIEWING ANGLE
15°
35°
ENGLISH
8 OPERATING THE MONITOR
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the
COMPLIANT TIMING shown on page 18. You are also able to adjust the picture by following the button
operation shown below.
Press the MENU Button to start the On Screen Display (OSD) feature. There are
additional Menu items which can be switched by using the / Buttons.
Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Press the MENU Button. Then, use the / Buttons to highlight
the desired adjustment icon.
Press the MENU Button again. Use the / Buttons to make the appropriate
adjustment or setting.
Press the EXIT Button to leave the menu, and the settings you just made would be
automatically saved.
For example, to correct for OSD vertical position, select Menu item of (OSDSettings) and
then press the MENU Button. Then, select OSD V. Position by using the / Buttons and press
then the MENU Button.
And use the / Buttons to change the OSD vertical position settings. The OSD vertical
position should be changing accordingly while you are doing this.
Press the EXIT Button lastly, it ends, all changes are saved in the memory.
Over Drive
Brightness
Sharpness
Adv. Contrast
Color
Language
OSD Settings
Contrast
Setup Menu
ECO Mode
Picture
ECO Mode
50
Off
90
50
Off
Off
Picture
Color
Language
Setup Menu
OSD Settings
50
OSD Time Out
OSD V. Position
OSD Background
OSD H. Position
Off
5
50
When button operations are aborted during adjustment, On-Screen Display disappears
when the time set for the OSD Time Out has passed. Also, the EXIT Button can be used
toreturnpreviousmenuandturnotheOn-ScreenDisplay.
Any changes are automatically saved in the memory when the On Screen Display
disappears.TurningothepowershouldbeavoidedwhileusingtheMenu.
All adjustments have only one setting which applies to all signal timings.
NOTE
ENGLISH
OPERATING THE MONITOR 9
ADJUSTMENT MENU CONTENTS
Too dark
Too bright
Brightness *1,2
Too dull
Too intense
*1 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
bright.
*2 Adjustable / settable items depend on which item is activated. See page 13 Function Correlation
Matrix for more details.
Brightness of back-light is reduced.
O Normal
ECO Mode *2
Adv. Contrast *2Increased Contrast RatioOn
O Typical Contrast Ratio
Adjustment Item Problem / Option Button to Press
Picture
Contrast *2
1
Brightness of back-light is reduced more than 1.2
Brightness of back-light is reduced more than 2.3
Over Drive *2
O/-2/-1/0/+1/+2
It will improve the gray level response time of the
LCD panel.
A higher level results in a faster response time.
Sharpness *2
You can change the picture quality from 0 to 100
(softtosharp).
Press the Button to change the picture quality in
numerical order. Press the Button to change the
picture quality in reverse numerical order.
Adjust the picture quality at resolutions of less
1920 x 1080. You can change the picture quality.
+
+
+
+
You can skip the Menu items and directly display an option setting screen by using the following
button operations.
ECO Mode: Press the Button when the Menu is not displayed.
Direct
Direct
ENGLISH
10 OPERATING THE MONITOR
Too weak
Too strong
Adjustment Item Problem / Option Button to Press
Color *1,2
User Color
Cool color
Red
Green
Blue
Cool(9300k)
Warm color
Normal(6500k) Normal color
Warm(5500K)
*1 Functions other than i-Style Color is disabled when i-Style Color is activated.
*2 Functions other than Blue Light Reducer is disabled when Blue Light Reducer is activated.
*3 Adjustable / settable items depend on which item is activated. See page 18 Function Correlation
Matrix for more details.
You can skip the Menu items and directly display an option setting screen by using the following
button operations.
i-Style Color: Press the Button when the Menu is not displayed.
Direct
Blue Light Reducer *3
O Typical
1Blue light is reduced.
2Blue light is reduced more than Mode1.
3Blue light is reduced more than Mode2.
Direct
i-Style Color *3
Standard For general windows environment and
monitor default setting.
Text For text editing and viewing in a word
processing environment.
Game For PC game environment.
Cinema For movie and video environment.
Scenery For displaying outdoor scenery images
O Return to a state set by color adjustment
except i-Style Color.
+
ENGLISH
OPERATING THE MONITOR 11
OSD H. Position OSD is too left
OSD is too right
OSD is too low
OSD is too high
You can set the OSD display duration time.
5s / 15s / 30s / 60s
OSD V. Position
Adjustment Item Problem / Option Button to Press
OSD Settings
OSD Time Out
OSD Background
English
Deutsch
English
German
Français French Japanese
Russian
Polski Polish
Nederlands Dutch
Русский
Adjustment Item Problem / Option Button to Press
Language
Language
+
+
+
SimpliedChinese
Traditional Chinese
The background of OSD is made transparent.
O Return the background of OSD.
On
ENGLISH
12 OPERATING THE MONITOR
Factory-preset data is restored.
Adjustment Item Problem / Option Button to Press
Setup Menu
Memory Recall No
Yes
Return to Menu.
iiyama Logo displayed when the monitor is turned on.
On
O iiyama Logo does not display when the monitor is
turned on.
Opening Logo
LED The Power Indicator is turned On.
O ThePowerIndicatoristurnedO.
On
TurnOthePower Indicator when you are bothered by the light.
NOTE
Full Screen
Expansion display of Aspect
Aspect Ratio *
Video Mode Adjust Full screen display
See your graphic card user guide for more
information about changing the resolution and
refresh.
Displays information regarding the current input signal coming from the
graphic card in your computer.
NOTE
<Example>
Opening Logo
LED
Video Mode Adjust
Picture
Color
Language
OSD Settings
Setup Menu Memory Recall
1920x1080@60Hz
MODEL:X1670HC
Information
Information
* It can display in the center of the screen with a 4:3, 5:4 or 16:10 aspect ratio when input video
resolution is 4:3, 5:4 or 16:10.
ENGLISH
OPERATING THE MONITOR 13
● Lock Mode
<OSD Menu>
1. The OSD lock will be activated by pressing the front buttons MENU and for about 5 seconds. If
you try to access the OSD by pressing any of the buttons MENU, , and EXIT, message "OSD
Locked" will appear on the screen.
2. The OSD lock will be deactivated by pressing the front buttons MENU and again for 5 seconds.
<Power Switch>
1. The power switch lock will be activated by pressing the front buttons EXIT and for 10 seconds.
Lockingthepowerswitchmeansthatwon'tbeabletoturnotheMonitorwhilethepowerswitch
is locked. If presses the power switch message "Power Button Locked" will appear on the screen.
2. The power switch lock will be deactivated by pressing the front buttons EXIT and again for
about 10 seconds.
Function Correlation Matrix
Item to be selected
Adv.
Contrast
ECO
Mode
i-Style
Color
Blue Light
Reducer Brightness Contrast Sharpness Over Drive
Item
activated
Adv. Contrast – –
ECO Mode – –
i-Style Color –– –––––
Blue Light
Reducer – – – –
: Available
– : Not available
ENGLISH
14 OPERATING THE MONITOR
Evenwhenusingthestandbymode,themonitorconsumeselectricity.TurnothePower
Switch whenever the monitor is not in use, during the night and weekends, to avoid
unnecessary power consumption.
NOTE
STANDBY FEATURE
Standby Mode
When the video signal from the computer is o, the monitor enters into Standby Mode which
reduces the power consumption to less than 0.5W. The screen becomes dark, and the power
indicator turns to orange. From Standby Mode, the image reappears in several seconds when
either the keyboard or the mouse are touched again.
The standby feature of this product complies with power saving requirement of VESA DPMS. When
activated, it automatically reduces unnecessary power consumption of the monitor when your
computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There
is a standby step the monitor takes as described below. The standby function, including any timer
settingsisconguredbytheoperatingsystem.Checkyouroperatingsystemmanualforinformation
onhowthiscanbecongured.
0 0.5W 100%
POWER
CONSUMPTION
Blue
Orange
Power Indicator
NORMAL MODE
STANDBY MODE
ENGLISH
TROUBLE SHOOTING 15
TROUBLE SHOOTING
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem
you have. If the monitor does not get a picture, skip to 2.
2.ConsultthefollowingitemsifyoucannotndanappropriateadjustmentiteminOPERATINGTHE
MONITOR or if the problem persists.
3.
If you are experiencing a problem which is not described below or you cannot correct the problem,
discontinue using the monitor and contact your dealer or iiyama service center for further assistance.
Problem Check
(Power indicator
isorange.)
The screen is not
synchronized.
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
(Power indicator
isblue.)
The picture does
not appear.
(Power indicator
does not light
up.)
ThePowerCableisrmlyseatedinthesocket.
The Power Switch is turned ON.
The AC socket is live. Please check with another piece of equipment.
If the blank screen saver is in active mode, touch the keyboard or the mouse.
Increase the Contrast and/or Brightness.
The computer is ON.
The Signal Cable is properly connected.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
If the monitor is in standby mode, touch the keyboard or the mouse.
The computer is ON.
The Signal Cable is properly connected.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
The Signal Cable is properly connected.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
The video output level of the computer is within the specication of the
monitor.
Thepowervoltageiswithinthespecicationofthemonitor.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
The screen
position is not in
the center.
The screen is too
bright or too dark.
The screen is
shaking.
ENGLISH
16 RECYCLING INFORMATION
For better environment protection please don't dispose your monitor.
Please visit our web site: www.iiyama.com for monitor recycling.
RECYCLING INFORMATION
ENGLISH
APPENDIX 17
SPECIFICATIONS
APPENDIX
Designandspecicationsaresubjecttochangewithoutpriornotice.
Size Category 16"
LCD
Panel
Panel technology
IPS(In-Plane-Switching)
Size Diagonal:15.6"(39.5cm)
Pixel pitch 0.179mm H × 0.179mm V
Brightness 220cd/m2(Typical)
Contrast ratio 800:1(Typical),Adv.ContrastFunctionAvailable
Viewable angle Right/Left:85°each,Up/Down:85°each(Typical)
Response time 6ms(GraytoGray)
Display Colors Approx. 16.7M
Sync Frequency Horizontal: 30.0 - 68.0kHz, Vertical: 60Hz
Native Resolution 1920 × 1080, 2.1 MegaPixels
Supported max. resolution 1920 × 1080 60Hz
Input Connector USB-C(DPalt-mode),MicroUSB
Plug & Play VESA DDC2BTM
Input Video Signal USB-C(DPalt-mode)
Maximum Screen Size 344.2mm W × 193.6mm H / 13.6" W × 7.6" H
Power Source 5VDC, 2A
Power Consumption 8W typical, Standby mode: 0.5W maximum
Dimensions / Net Weight
377.0×234.5×20.0mm/14.8×9.2×0.8"(W×H×D)
0.96kg / 2.1lbs
Tilt Angle Upward: 15 - 35°
Environmental
Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
5 to 35°C / 41 to 95°F
10to80%(Nocondensation)
-20 to 60°C / -4 to 140°F
5to85%(Nocondensation)
Approvals CE, TÜV-Bauart, EAC
ENGLISH
18 APPENDIX
DIMENSIONS
M264A21
COMPLIANT TIMING
Video Mode Horizontal
Frequency Vertical
Frequency Dot Clock
640 × 480 31.469kHz 59.940Hz 25.175MHz
800 × 600 37.879kHz 60.317Hz 40.000MHz
1024 × 768 48.363kHz 60.004Hz 65.000MHz
1280 × 1024 63.981kHz 60.020Hz 108.000MHz
1680 × 1050 65.290kHz 60.000Hz 146.250MHz
1920 × 1080 66.590kHz 59.930Hz 138.500MHz
377.0mm/14.8”
346.5mm/13.6”
196.0mm/7.7”
234.5mm/9.2”
20.0mm/0.8”
28.0mm/1.1”
79.5mm/3.1”
* When the stand is closed.