iiyama X2474HV-B1 User Manual
Displayed below is the user manual for X2474HV-B1 by iiyama which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
ENGLISH
USER MANUAL
Thank you very much for choosing the
iiyama LCD monitor.
We recommend that you take a few
minutes to read carefully through
this brief but comprehensive manual
before installing and switching on the
monitor. Please keep this manual in a
safe place for your future reference.
ENGLISH
We reserve the right to change specifi cations without notice.
All trademarks used in this user manual are the property of their respective owners.
As an ENERGY STAR® Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines
for energy effi ciency.
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the address:
http://www.iiyama.com
You can access the Web page of diff erent countries from there.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC
Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU
“RoHS Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in
residential areas, business and light industrial premises and small-scale enterprises, inside as
well as outside of the buildings. All places of operation are characterised by their connection to
the public low voltage power supply system.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PL2474H
ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................1
SAFETY PRECAUTIONS................................................................1
SPECIAL NOTES ON LCD MONITORS .........................................3
CUSTOMER SERVICE ...................................................................3
CLEANING ......................................................................................3
BEFORE YOU OPERATE THE MONITOR ..........................................4
FEATURES......................................................................................4
CHECKING THE CONTENTS OF THE PACKAGE ........................4
WALL MOUNTING ..........................................................................5
FITTING AND REMOVAL OF BASE :
ProLite XB2474HS / ProLite XB2474HV .........................................6
FITTING AND REMOVAL OF BASE :
ProLite X2474HS / ProLite X2474HV ..............................................7
CONTROLS AND CONNECTORS :
ProLite XB2474HS / ProLite XB2474HV .........................................8
CONTROLS AND CONNECTORS :
ProLite X2474HS / ProLite X2474HV ..............................................9
CONNECTING YOUR MONITOR :
ProLite XB2474HS / ProLite XB2474HV .......................................10
CONNECTING YOUR MONITOR :
ProLite X2474HS / ProLite X2474HV ........................................... 11
COMPUTER SETTING .................................................................12
ADJUSTING THE VIEWING ANGLE :
ProLite X2474HS / ProLite X2474HV ............................................12
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE :
ProLite XB2474HS / ProLite XB2474HV ......................................13
PANEL ROTATION : ProLite XB2474HS / ProLite XB2474HV ....13
OPERATING THE MONITOR .............................................................14
ADJUSTMENT MENU CONTENTS ..............................................15
SCREEN ADJUSTMENTS ............................................................22
POWER MANAGEMENT FEATURE .............................................25
TROUBLE SHOOTING ......................................................................26
RECYCLING INFORMATION .............................................................27
APPENDIX ........................................................................................28
SPECIFICATIONS : ProLite XB2474HS .......................................28
SPECIFICATIONS : ProLite X2474HS ..........................................29
SPECIFICATIONS : ProLite XB2474HV .......................................30
SPECIFICATIONS : ProLite X2474HV ..........................................31
DIMENSIONS : ProLite XB2474HS / ProLite XB2474HV .............32
DIMENSIONS : ProLite X2474HS / ProLite X2474HV ..................32
COMPLIANT TIMING ....................................................................33
ENGLISH
FOR YOUR SAFETY 1
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR IF YOU ARE AWARE OF ANY PROBLEMS
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the
monitor and contact your dealer or iiyama service center immediately. Further use may be
dangerous and can cause fi re or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
fi re or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
any object inside may cause fi re, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fi re or electric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specifi ed power supply. Use of an incorrect voltage will
cause malfunction and may cause fi re or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objects on the cables. If damaged, the cables may cause fi re or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS
ENGLISH
2 FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or
smoky areas as it may cause fi re, electric shock or damage. You should also avoid areas where the
sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not
pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
fi re. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the
cabinet will be blocked and the monitor may overheat if the stand is removed. This may cause fi re
or damage. Operating the monitor on its back, side, upside down or on a carpet or any other soft
material may also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal
cable is disconnected. If you do not disconnect them, it may cause fi re or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable
itself as this may cause fi re or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may
damage your computer.
CAREFUL! PROTECT YOUR HANDS AND FINGERS
Be careful not to hurt your fi ngers or hands when you change the height or the angle.
Injury can occur if care is not taken to avoid fi nger contact with the displays base when adjusting
the height. (Just for height adjustable model.)
REMARK FOR 24/7 USAGE
This product is not specifi cally designed for 24/7 usage in all environments.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
ENGLISH
FOR YOUR SAFETY 3
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE
When you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture position to
the correct position.
You may fi nd slightly uneven brightness on the screen depending on the desktop pattern
you use.
Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screen can be recovered slowly by changing the image or turning off the Power Switch
for some hours.
SPECIAL NOTES ON LCD MONITORS
If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or replacement
packaging.
WARNING
If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.
CAUTION
For safety reasons, turn off the power switch and unplug the monitor before you
clean it.
To protect the LCD panel, do not scratch or rub the screen with a hard object.
Never use any of the following strong solvents. These will damage the cabinet and
the LCD screen.
Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
Thinner
Benzine
Abrasive cleaner
Spray-type cleaner
Wax
Acid or Alkaline solvent
CABINET Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
LCD
SCREEN
Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
CUSTOMER SERVICE
CLEANING
NOTE
NOTE
ENGLISH
4 BEFORE YOU OPERATE THE MONITOR
The following accessories are included in your package. Check to see if they are enclosed with
the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional
iiyama offi ce.
BEFORE YOU OPERATE THE MONITOR
CHECKING THE CONTENTS OF THE PACKAGE
FEATURES
Supports Resolutions up to 1920 × 1080
High Contrast 3000:1 (Typical), Adv. Contrast Function Available / Brightness
250cd/m2 (Typical) / Quick Response Time 4ms (Gray to Gray)
Flicker Free
Blue Light Reducer
Digital Character Smoothing
Automatic Set-up
Stereo Speakers : ProLite XB2474HS / ProLite X2474HS
2 × 2.5W Stereo Speakers
Plug & Play VESA DDC2B Compliant
Windows® 7/8.1/10 Compliant
Power Management (ENERGY STAR® and VESA DPMS Compliant)
VESA Mounting Standard (100mm×100mm) Compliant
Keyhole for Security Lock
*1 The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/250V
must be used. However, all guarantees and warranties are void for any problems or
damage caused by a power cable not supplied by iiyama.
*2 Accessory for ProLite XB2474HV / ProLite X2474HV.
*3 Accessory for ProLite XB2474HS / ProLite X2474HS.
*4 Accessory for ProLite X2474HS / ProLite X2474HV.
*5 Accessory for ProLite XB2474HS / ProLite XB2474HV.
Power Cable*1
VGA Cable*2
HDMI Cable*3
Stand-Base
Stand*4
Screw for stand fi xing (3pcs)*5
Safety Guide
Quick Start Guide
CAUTION
ENGLISH
BEFORE YOU OPERATE THE MONITOR 5
When you use with the wall mounting, in consideration of thickness of the mounting
stage, tighten the M4 Screw with washer which “L” length is 7mm to fasten the
monitor. Using the screw longer than this may cause electric shock or damage
because it may contact with the electrical parts inside the monitor.
Please check if the wall or ceiling can support the weight of the monitor before
mounting it.
WALL MOUNTING
WARNING
Screw
Chassis
Mounting Stage
L
ENGLISH
6 BEFORE YOU OPERATE THE MONITOR
Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid electric shock or damage.
CAUTION
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor fl at on a table with front face down.
Hold the monitor and push the Stand-Base.
Use ‘thumb screw’ provided to secure base to monitor column.
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor fl at on a table with front face down.
Remove ‘thumb screw’ to remove base from monitor column.
FITTING AND REMOVAL OF BASE : ProLite XB2474HS / ProLite XB2474HV
Thumb screw for Stand-Base fi xing
Stand-Base
<Stopper>
Put the monitor on a fl at surface. Press the stopper at
the back of the stand while pushing the monitor from the
top. Careful attention is required as the monitor is sprung
loaded and the stand may expand quickly. Stopper
ENGLISH
BEFORE YOU OPERATE THE MONITOR 7
Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid electric shock or damage.
CAUTION
FITTING AND REMOVAL OF BASE : ProLite X2474HS / ProLite X2474HV
<Installation>
Put a piece of soft cloth on the table beforehand
to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face
down.
Hold the monitor and push the Stand until it
clicks and is secure.
Hold the monitor and push the Stand-Base until
it clicks and is secure.
<Removal>
Put a piece of soft cloth on the table beforehand
to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face
down.
Press and hold the hooks inside, and pull the
Stand-Base.
Press the hook and remove the Stand.
Hooks
Stand-Base
Stand
Hooks
ENGLISH
8 BEFORE YOU OPERATE THE MONITOR
CONTROLS AND CONNECTORS : ProLite XB2474HS / ProLite XB2474HV
Power Switch ( )
Power Indicator
Blue: Normal operation
Orange: Power Management
Input select*2 / Select Button (INPUT*2/SELECT)*1
Scroll up / Audio Adjust*2 Button ( / *2 )*1
Scroll down / i-Style Color Button ( / i )*1
Menu / Exit Button (MENU/EXIT)
Speakers*2
Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
Headphone Connector ( )*2
Audio Connector ( )*2
VGA Connector (VGA)
HDMI Connector (HDMI)*2
DisplayPort Connector (DP)*2
Cable Holes
AC Connector( : Alternating current) (AC POWER IN)
*1 You can skip the Menu items and display an adjustment scale directly.
*2 Available for ProLite XB2474HS only.
<Front> <Back>
NOTE
NOTE
ENGLISH
BEFORE YOU OPERATE THE MONITOR 9
CONTROLS AND CONNECTORS : ProLite X2474HS / ProLite X2474HV
<Front> <Back>
Power Switch ( )
Power Indicator
Blue: Normal operation
Orange: Power Management
Input select*2 / Select Button (INPUT*2/SELECT)*1
Scroll up / Audio Adjust*2 Button ( / *2 )*1
Scroll down / i-Style Color Button ( / i )*1
Menu / Exit Button (MENU/EXIT)
Speakers*2
Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
Headphone Connector ( )*2
Audio Connector ( )*2
VGA Connector (VGA)
HDMI Connector (HDMI)*2
DisplayPort Connector (DP)*2
AC Connector( : Alternating current) (AC POWER IN)
*1 You can skip the Menu items and display an adjustment scale directly.
*2 Available for ProLite X2474HS only.
NOTE
NOTE
ENGLISH
10 BEFORE YOU OPERATE THE MONITOR
CONNECTING YOUR MONITOR : ProLite XB2474HS / ProLite XB2474HV
Ensure that both the computer and the monitor are switched off .
Connect the computer to the monitor with the signal cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
Connect the Power Cable to the monitor fi rst and then to the power supply.
Turn on your monitor and computer.
[Example of Connection]
<Back>
NOTE The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regional iiyama offi ce.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama offi ce for a suitable adaptor.
Make sure you tighten the fi nger screws at each end of the signal cable.
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.
[ Collect Cables ]
Put the cables through the cable hole.
Collect cables at the back of the stand.
Power Cable (Accessory)
Audio Cable (Not Included)*
1
Computer
VGA Cable(Accessory)*
2
DisplayPort Cable (Not Included)*
1
HDMI Cable (Accessory)*
1
AV Equipment
*1 Available for ProLite XB2474HS only.
*2 Not included in the ProLite XB2474HS.
VGA cable is not supplied with the monitor. If you use low quality VGA cable, it may cause a result
of electro-magnetic interference. Please contact the iiyama Support Centre in your country if you
wish to connect the monitor via the VGA input.
ENGLISH
BEFORE YOU OPERATE THE MONITOR 11
CONNECTING YOUR MONITOR : ProLite X2474HS / ProLite X2474HV
[Example of Connection]
<Back>
Power Cable (Accessory)
Audio Cable (Not Included)*
1
Computer
VGA Cable (Accessory)*
2
DisplayPort Cable (Not Included)*
1
HDMI Cable (Accessory)*
1
AV Equipment
Ensure that both the computer and the monitor are switched off .
Connect the computer to the monitor with the signal cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
Connect the Power Cable to the monitor fi rst and then to the power supply.
Turn on your monitor and computer.
NOTE The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regional iiyama offi ce.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama offi ce for a suitable adaptor.
Make sure you tighten the fi nger screws at each end of the signal cable.
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.
*1 Available for ProLite X2474HS only.
*2 Not included in the ProLite X2474HS.
VGA cable is not supplied with the monitor. If you use low quality VGA cable, it may cause a result
of electro-magnetic interference. Please contact the iiyama Support Centre in your country if you
wish to connect the monitor via the VGA input.
ENGLISH
12 BEFORE YOU OPERATE THE MONITOR
Signal Timing
Change to the desired signal timing listed on page 33: COMPLIANT TIMING.
COMPUTER SETTING
ADJUSTING THE VIEWING ANGLE : ProLite X2474HS / ProLite X2474HV
For optimal viewing it is recommended to look at the full face
of the monitor.
Hold the stand so that the monitor does not topple when you
change the monitor’s angle.
You are able to adjust the monitor’s angle up to 20° upward,
3° downward.
In order to ensure a healthy and relaxed body position
when using the monitor at visual display workstations, it
is recommended that the adjusted tilt angle should not
exceed 10 degrees. Adjust the monitor’s angle to your own
preference.
NOTE Do not touch the LCD screen when you change
the angle. It may cause damage or break the LCD
screen.
Careful attention is required not to catch your
fi ngers or hands when you change the angle.
3° 20°
ENGLISH
BEFORE YOU OPERATE THE MONITOR 13
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE :
ProLite XB2474HS / ProLite XB2474HV
For optimal viewing it is recommended to
position yourself directly opposite to the full face
of the monitor, then adjust the monitor’s height
and angle to your own preference.
Hold the panel so that the monitor does not topple
when you change the monitor’s height or angle.
You are able to adjust the monitor's height up to
130mm, angle up to 45 degrees right and left, 22
degrees upward and 5 degrees downward.
Do not touch the LCD screen when you
change the height or the angle. It may
cause damage or break the LCD screen.
Careful attention is required not to
catch your fingers or hands when you
change the height or the angle.
Injury can occur if care is not taken to
avoid fi nger contact with the displays
base when adjusting the height.
NOTE
PANEL ROTATION : ProLite XB2474HS / ProLite XB2474HV
Adjust the monitor’s height.
Rotate the panel 90 degrees.
Portrait: Turn clockwise.
Landscape: Turn counter clockwise.
Attempting to rotate without fully extending
upward may cause damage to stand.
Video card for portrait display will be
required for rotating the image on the
screen.
Adjust the monitor’s angle to your preference.
NOTE
Monitor
Stand
90°
45° 45°
130mm
ENGLISH
14 OPERATING THE MONITOR
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the
COMPLIANT TIMING shown on page 33. You are also able to adjust the picture by following the button
operation shown below. For more detailed adjustments, see page 22 for SCREEN ADJUSTMENTS.
Press the MENU Button to start the On Screen Display (OSD) feature. There are
additional Menu items which can be switched by using the / Buttons.
Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Press the SELECT Button. Then, use the / Buttons to
highlight the desired adjustment icon.
Press the SELECT Button again. Use the / Buttons to make the appropriate
adjustment or setting.
Press the EXIT Button to leave the menu, and the settings you just made would be
automatically saved.
When button operations are aborted during adjustment, On-Screen Display disappears
when the time set for the OSD Time Out has passed. Also, the EXIT button can be used
to return previous menu and turn off the On-Screen Display.
Any changes are automatically saved in the memory when the On Screen Display
disappears. Turning off the power should be avoided while using the Menu.
Adjustments for H./V. Position, Clock and Phase are saved for each signal timing. Except for
these adjustments, all other adjustments have only one setting which applies to all signal timings.
For example, to correct for vertical position, select Menu item of Manual Image Adjust and then
press the SELECT Button. Then, select H./V.Position by using the / Buttons.
An adjustment page appears after you press the SELECT Button. Then, select V. Position
by using the / Buttons. Press the SELECT Button again. Then, use the / Buttons
to change the vertical position settings. The vertical position of the overall display should be
changing accordingly while you are doing this.
Press the EXIT Button lastly, it ends, all changes are saved in the memory.
NOTE
Manual Image Adjust
H./V. Position
H. Position
V. Position
▲
▲
50
▲
▲
50
EXIT : E x i t S e l e c t : SELECT
Picture Adjust
Input Select
Audio Adjust
Color Adjust
Information
Manual Image Adjust
Setup Menu
Reset
Auto Image Adjust
EXIT : E x i t S e l e c t : SELECT
Picture Adjust
Input Select
Audio Adjust
Color Adjust
Information
Setup Menu
Reset
Auto Image Adjust
Manual Image Adjust
EXIT : E x i t S e l e c t : SELECT
H./V. Position
Clock
Phase
Sharpness
Video Mode Adjust
Blue Light Reducer
X-res Technology
Manual Image Adjust
EXIT : E x i t S e l e c t : SELECT
ENGLISH
OPERATING THE MONITOR 15
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option Button to Press
Auto Image Adjust
Auto Image Adjust * Adjust H. / V. Position, Clock and Phase automatically.
* For best results, use the Auto Image Adjust in conjunction with the adjustment pattern. See page
22 for SCREEN ADJUSTMENTS.
Only Analog Input
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
Auto Image Adjust: Pressing and holding of the Button for about 2 seconds when the Menu is
not displayed.
Direct
Direct
Auto Image Adjust
ENGLISH
16 OPERATING THE MONITOR
Too dark
Too bright
Brightness *1,2
Too dull
Too intense
*1 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
bright.
*2 See page 21 for Disabled function matrix.
*3 To activate the option, mark it in the setup menu. To deactivate it, remove the marking.
Brightness of back-light is reduced.
Off Normal
ECO Mode *2
Adv. Contrast *2,3
Increased Contrast RatioOn
Off Typical Contrast Ratio
Adjustment Item Problem / Option Button to Press
Picture Adjust
Contrast *2
1
Brightness of back-light is reduced more than 1.2
Brightness of back-light is reduced more than 2.3
Picture Adjust
Overdrive
Off / -2 / -1 / 0 / +1 / +2
It will improve the gray level response time of the
LCD panel.
A higher level results in a faster response time.
ENGLISH
OPERATING THE MONITOR 17
Adjustment Item Problem / Option Button to Press
Input Select *
Input Select
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
Input Select: Press the INPUT Button when the Menu is not displayed.
Direct
Direct
Input source is fi xed, not selected automatically when VGA, HDMI and DisplayPort
which are selected.
Select the VGA input.
Select the HDMI input.
VGA
HDMI
Auto
Search for an available input source and select
automatically.
Select the DisplayPort input. DisplayPort
NOTE
Volume Too soft
Too loud
Adjustment Item Problem / Option Button to Press
Audio Adjust *1
Mute *2
Direct
Direct
Return the sound volume to the previous level.
Turn off the sound temporarily.
Select the Line-In input. Line-In
Select the HDMI input. HDMI
Audio Input *3
*1 Available for ProLite XB2474HS / ProLite X2474HS only.
*2 To activate the option, mark it in the setup menu. To deactivate it, remove the marking.
*3 Suitable for HDMI / DisplayPort input only.
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
Audio Adjust: Press the Button when the Menu is not displayed.
Mute: Pressing and holding of the Button for about 2 seconds when the Menu is not
displayed.
Mute and Unmute are switched as follows by pressing the Button successively.
Input Select
Audio Adjust
On
Off
Direct
* Available for ProLite XB2474HS / ProLite X2474HS only.
Select the DisplayPort input. DisplayPort
ENGLISH
18 OPERATING THE MONITOR
Information
See your graphic card user guide for more information
about changing the resolution and refresh.
Displays information regarding the current input signal coming
from the graphic card in your computer.
NOTE
Too weak
Too strong
Adjustment Item Problem / Option Button to Press
Color Adjust *
User Color
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
i-Style Color: Press the Button when the Menu is not displayed.
Direct
Direct
Bluish white
Red
Green
Blue
Cool
Reddish white
Normal Greenish white
Warm
i-Style Color
Standard For general windows environment and monitor
default setting.
Text For text editing and viewing in a word processing
environment.
Game For PC game environment.
Cinema For movie and video environment.
Scenery For displaying outdoor scenery images
Off Return to a state set by color adjustment except
i-Style Color.
<Example>
Color Adjust
Information
Resolution:
H.Frequency:
V.Frequency:
Pixel Clock:
Model Number:
Information
1920x1080
67.56KHz
60.0Hz
148.5MHz
X/XB2474HS
EXIT : E x i t S e l e c t : SELECT
* See page 21 for Disabled function matrix.
ENGLISH
OPERATING THE MONITOR 19
Too left
Too right
Too low
Too high
Too narrow
Too wide
To correct fl ickering text or lines
*1 Only Analog Input.
*2 See page 22 for SCREEN ADJUSTMENTS.
*3 It can display in the center of the screen with a 4:3, 5:4 or 16:10 aspect ratio when input video
resolution is 4:3, 5:4 or 16:10.
*4 See page 21 for Disabled function matrix.
*5 Available for ProLite XB2474HS / ProLite X2474HS only.
Full
Screen
Expansion display of Aspect
Adjustment Item Problem / Option Button to Press
Manual Image Adjust
Clock *1
H./V. Position *1,2
H. Position
V. Position
Phase *1
Sharpness
Aspect
Ratio *3
Video Mode Adjust Full screen display
1 2 3 4 5
You can change the picture quality from 1 to 5 (soft to sharp).
Press the Button to change the picture quality in numerical
order. Press the Button to change the picture quality in reverse
numerical order.
Adjust the picture quality at resolutions of less 1920 x 1080.
You can change the picture quality (5 steps).
Manual Image Adjust
Blue Light Reducer *4
Off Typical
1Blue light is reduced.
2Blue light is reduced more than Mode1.
3Blue light is reduced more than Mode2.
Enhance the picture edge.
Off Normal
Soft
Enhance the picture edge more than the Middle option.
Hard
X-Res Technology *5
Enhance the picture edge more than the Soft option.
Middle
ENGLISH
20 OPERATING THE MONITOR
Reset Factory-preset data is restored.
English
Deutsch
English
German
Français French
Japanese
Russian
Polski Polish
Simplifi ed Chinese
Nederlands Dutch
Русский
OSD
H.Position
OSD is too left
OSD is too right
OSD is too low
OSD is too high
You can set the OSD display duration time.
5 / 15 / 30 / 60 seconds
OSD
V.Position
Adjustment Item Problem / Option Button to Press
Setup Menu
Language Select
OSD Position
OSD Time Out
OSD Background*
LED*
The background of OSD is made transparent.
Off Retune the background of OSD.
On
The Power Indicator is turned On.
Off The Power Indicator is turned Off .
On
Turn Off the Power Indicator when you are bothered by the light.
NOTE
Adjustment Item Problem / Option Button to Press
Reset
iiyama Logo displayed when the monitor is turned on.
On
Off iiyama Logo does not display when the monitor is
turned on.
Opening Logo*
Setup Menu
Reset
* To activate the option, mark it in the setup menu. To deactivate it, remove the marking.
Traditional Chinese
Česky Czech
Italiano Italian
ENGLISH
OPERATING THE MONITOR 21
● Lock Mode
<OSD Menu>
1. The OSD lock will be activated by pressing the front buttons MENU and for about 10 seconds.
If you try to access the OSD by pressing any of the buttons MENU, , and SELECT, message
"OSD Locked" will appear on the screen.
2. The OSD lock will be deactivated by pressing the front buttons MENU and again for 10
seconds.
<Power Switch>
1. The power switch lock will be activated by pressing the front buttons MENU and for 10
seconds. Locking the power switch means that won't be able to turn off the Monitor while the
power switch is locked. If presses the power switch message "Power Button Locked" will appear
on the screen.
2. The power switch lock will be deactivated by pressing the front buttons MENU and again for
about 10 seconds.
Disabled function matrix
After enabled function
Contrast Brightness Adv.
Contrast
ECO
Mode Overdrive Color Blue Light
Reducer
Function
enabled
Adv. Contrast
ECO Mode
i-Style Color
Blue Light
Reducer
: adjustable
: disabled
ENGLISH
22 OPERATING THE MONITOR
SCREEN ADJUSTMENTS
The screen adjustments described in this manual are designed to set image position and minimize
fl icker or blur for the particular computer in use.
The monitor is designed to provide the best performance at resolution of 1920 × 1080, but can not
provide the best at resolutions of less than 1920 × 1080 because the picture is automatically stretched
to fi t the full screen. It is recommended to operate at resolution of 1920 × 1080 in normal use.
Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to
the screen enlargement process.
It is preferable to adjust the image position and frequency with the monitor controls, rather than
the computer software or utilities.
Perform adjustments after a warm-up period of at least thirty minutes.
Additional adjustments may be required after the Auto Image Adjust depending on the resolution
or signal timing.
The Auto Image Adjust may not work correctly when displaying the picture other than the screen
adjustment pattern. In this case, manual adjustments are required.
There are two ways to adjust the screen. One way is automatic adjustment for Position, Clock and
Phase. The other way is performing each adjustment manually.
Perform the Auto Image Adjust fi rst when the monitor is connected to a new computer, or resolution
is changed. If the screen has a fl icker or blur, or the picture does not fi t in the display area after
performing the Auto Image Adjust, manual adjustments are required. Both adjustments should be
made by using the screen adjustment pattern (Test.bmp) obtained via the IIYAMA web site (http://
www.iiyama.com).
Adjust the image by following the procedure below to get the desired picture.
This manual explains adjustment under Windows® OS.
Display the picture at the optimum resolution.
Enter the Test.bmp (screen adjustment pattern) to wallpaper.
Adjust the image by following the procedure below to get the desired picture when selecting Analog input.
NOTE
Zebra pattern
Color bar
Picture frame
[Adjustment pattern]
Consult the appropriate documentation for doing this.
Test.bmp is made at resolution of 1280 × 1024. Set the display position to center in
the wallpaper setting dialogue box.
ENGLISH
OPERATING THE MONITOR 23
1) Adjust the H.Position so that the left side of the picture frame will move to the left edge
of the display area.
When the left side of the picture frame moves apart from the left edge of the display
area during the Clock adjustment, adjust steps 1) and 2).
Another way to make the Clock adjustment is to correct the vertical wavy lines in the
zebra pattern.
The picture may fl icker during the Clock, H.Position and V.Position adjustment.
In case the picture frame is bigger or smaller than the data display area after the
Clock adjustment, repeat steps from .
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the Clock.
Pressing and holding of the Button for about 2 seconds. (Auto Image Adjust)
Adjust the image manually by following procedure below when the screen has a fl icker or
blur, or the picture does not fi t in the display area after performing the Auto Image Adjust.
Adjust the V.Position so that the top and bottom of the picture frame will fi t to the display
area.
NOTE
ENGLISH
24 OPERATING THE MONITOR
In case the strong fl icker or blurs remain on a part of the screen, repeat steps and
because the Clock may not be adjusted correctly. If the fl icker or blurs still remain,
set the refresh rate of computer to low (60Hz) and repeat steps from again.
Adjust the H.Position after the Phase adjustment if the horizontal position moves
during the adjustment.
Adjust the Phase to correct horizontal wavy noise, fl icker or blur in the zebra pattern.
NOTE
Adjust the Brightness and Color to get the desired picture after you complete the Clock
and Phase adjustments.
Put back your favorite wallpaper.
ENGLISH
OPERATING THE MONITOR 25
Even when using the power management mode, the monitor consumes electricity. Turn
off the Power Switch whenever the monitor is not in use, during the night and weekends,
to avoid unnecessary power consumption.
It is possible that the video signal from the computer may be on while the H or V sync
signal is missing. In this instance, the POWER MANAGEMENT feature may not work
properly.
POWER MANAGEMENT FEATURE
Power Management Mode
When the H-sync signal / V-sync signal / H and V sync signals from the computer are off , the
monitor enters into Power Management Mode which reduces the power consumption to less
than 0.5W. The screen becomes dark, and the power indicator turns to orange. From Power
Management Mode, the image reappears in several seconds when either the keyboard or the
mouse are touched again.
The power management feature of this product complies with power saving requirement of ENERGY
STAR® and VESA DPMS. When activated, it automatically reduces unnecessary power consumption
of the monitor when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer.
There is a power management step the monitor takes as described below. The power management
function, including any timer settings is confi gured by the operating system. Check your operating
system manual for information on how this can be confi gured.
0 0.5W 100%
POWER
CONSUMPTION
Blue
Orange
Power Indicator
NORMAL MODE
POWER MANAGEMENT MODE
NOTE
ENGLISH
26 TROUBLE SHOOTING
TROUBLE SHOOTING
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem
you have. If the monitor does not get a picture, skip to 2.
2. Consult the following items if you cannot fi nd an appropriate adjustment item in OPERATING THE
MONITOR or if the problem persists.
3.
If you are experiencing a problem which is not described below or you cannot correct the problem,
discontinue using the monitor and contact your dealer or iiyama service center for further assistance.
Problem Check
(Power indicator
is orange.)
The screen is not
synchronized.
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
(Power indicator
is blue.)
The picture does
not appear.
(Power indicator
does not light
up.)
The Power Cable is fi rmly seated in the socket.
The Power Switch is turned ON.
The AC socket is live. Please check with another piece of equipment.
If the blank screen saver is in active mode, touch the keyboard or the mouse.
Increase the Contrast and/or Brightness.
The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.
If the monitor is in power management mode, touch the keyboard or the mouse.
The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.
The video output level of the computer is within the specifi cation of the monitor.
The signal timing of the computer is within the specifi cation of the monitor.
The video output level of the computer is within the specifi cation of the
monitor.
The power voltage is within the specifi cation of the monitor.
The signal timing of the computer is within the specifi cation of the monitor.
The screen
position is not in
the center.
The screen is too
bright or too dark.
The screen is
shaking.
ENGLISH
TROUBLE SHOOTING / RECYCLING INFORMATION 27
No sound.
The audio equipment (computer etc.) is ON.
The Audio Cable is properly connected.
The Volume is turned up.
The Mute is OFF.
The audio output level of the audio equipment is within the specifi cation
of the monitor.
The audio output level of the audio equipment is within the specifi cation
of the monitor.
The Audio Cable is properly connected.
The sound is too
loud or too quiet.
A strange noise
is heard.
For better environment protection please don't dispose your monitor.
Please visit our web site: www.iiyama.com/recycle for monitor recycling.
RECYCLING INFORMATION
Problem Check
ENGLISH
28 APPENDIX
APPENDIX
Design and specifi cations are subject to change without prior notice.
SPECIFICATIONS : ProLite XB2474HS
* Audio equipment is not connected.
NOTE
Size Category 24"
LCD
Panel
Panel technology
VA
Size Diagonal: 23.6" (60cm)
Pixel pitch 0.272mm H × 0.272mm V
Brightness 250cd/m2 (Typical)
Contrast ratio 3000 : 1 (Typical), Adv. Contrast Function Available
Viewable angle
Right / Left : 89 degrees each, Up / Down: 89 degrees each (Typical)
Response time 4ms (Gray to Gray)
Display Colors Approx.16.7M
Sync Frequency VGA: Horizontal: 30.0-80.0kHz, Vertical: 55-75Hz
HDMI: Horizontal: 30.0-84.0kHz, Vertical: 50-75Hz
DisplayPort: Horizontal: 30.0-84.0kHz, Vertical: 50-75Hz
Native Resolution 1920 × 1080, 2.1 MegaPixels
Support max. resolution VGA: 1920 × 1080 60Hz
HDMI: 1920 × 1080 75Hz
DisplayPort: 1920 × 1080 75Hz
Input Connector VGA, HDMI, DisplayPort
Plug & Play VESA DDC2BTM
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal Analog: 0.7Vp-p (Standard), 75Positive
Digital: HDMI, DisplayPort
Input Audio Connector ø 3.5mm mini jack (Stereo)
Input Audio Signal 1.0Vrms maximum
Headphone Connector ø 3.5mm mini jack (Stereo)
Speakers 2.5W × 2 (Stereo speakers)
Maximum Screen Size 521.3mm W × 293.2mm H / 20.51" W × 11.54" H
Power Source 100-240VAC, 50/60Hz, 0.8A
Power Consumption* 19W typical, Power management mode: 0.5W maximum
Energy Effi ciency Class: A
Dimensions / Net Weight
547.5 × 382.5 - 512.5 × 230.0mm / 21.6 × 15.1 - 20.2 × 9.1" (W×H×D)
5.0kg / 11.0lbs
Tilt Angle
Upward: 22 degrees, Downward: 5 degrees, Left/Right: 45 degrees each
Environmental
Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
5 to 35°C / 41 to 95°F
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
Approvals CE, TÜV-Bauart, CU, VCCI-B, PSE, ENERGY STAR®
ENGLISH
APPENDIX 29
SPECIFICATIONS : ProLite X2474HS
* Audio equipment is not connected.
NOTE
Size Category 24"
LCD
Panel
Panel technology
VA
Size Diagonal: 23.6" (60cm)
Pixel pitch 0.272mm H × 0.272mm V
Brightness 250cd/m2 (Typical)
Contrast ratio 3000 : 1 (Typical), Adv. Contrast Function Available
Viewable angle
Right / Left : 89 degrees each, Up / Down: 89 degrees each (Typical)
Response time 4ms (Gray to Gray)
Display Colors Approx.16.7M
Sync Frequency VGA: Horizontal: 30.0-80.0kHz, Vertical: 55-75Hz
HDMI: Horizontal: 30.0-84.0kHz, Vertical: 50-75Hz
DisplayPort: Horizontal: 30.0-84.0kHz, Vertical: 50-75Hz
Native Resolution 1920 × 1080, 2.1 MegaPixels
Support max. resolution VGA: 1920 × 1080 60Hz
HDMI: 1920 × 1080 75Hz
DisplayPort: 1920 × 1080 75Hz
Input Connector VGA, HDMI, DisplayPort
Plug & Play VESA DDC2BTM
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal Analog: 0.7Vp-p (Standard), 75Positive
Digital: HDMI, DisplayPort
Input Audio Connector ø 3.5mm mini jack (Stereo)
Input Audio Signal 1.0Vrms maximum
Headphone Connector ø 3.5mm mini jack (Stereo)
Speakers 2.5W × 2 (Stereo speakers)
Maximum Screen Size 521.3mm W × 293.2mm H / 20.51" W × 11.54" H
Power Source 100-240VAC, 50/60Hz, 0.8A
Power Consumption* 19W typical, Power management mode: 0.5W maximum
Energy Effi ciency Class: A
Dimensions / Net Weight 547.5 × 405.5 × 177.0mm / 21.6 × 16.0 × 7.0" (W×H×D)
3.2kg / 7.1lbs
Tilt Angle Upward: 20 degrees, Downward: 3 degrees
Environmental
Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
5 to 35°C / 41 to 95°F
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
Approvals CE, TÜV-Bauart, CU, VCCI-B, PSE, ENERGY STAR®
ENGLISH
30 APPENDIX
SPECIFICATIONS : ProLite XB2474HV
Size Category 24"
LCD
Panel
Panel technology
VA
Size Diagonal: 23.6" (60cm)
Pixel pitch 0.272mm H × 0.272mm V
Brightness 250cd/m2 (Typical)
Contrast ratio 3000 : 1 (Typical), Adv. Contrast Function Available
Viewable angle
Right / Left : 89 degrees each, Up / Down: 89 degrees each (Typical)
Response time 4ms (Gray to Gray)
Display Colors Approx.16.7M
Sync Frequency Horizontal: 30.0-80.0kHz, Vertical: 55-75Hz
Native Resolution 1920 × 1080, 2.1 MegaPixels
Support max. resolution 1920 × 1080 60Hz
Input Connector VGA
Plug & Play VESA DDC2BTM
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal Analog: 0.7Vp-p (Standard), 75Positive
Maximum Screen Size 521.3mm W × 293.2mm H / 20.51" W × 11.54" H
Power Source 100-240VAC, 50/60Hz, 0.8A
Power Consumption 17W typical, Power management mode: 0.5W maximum
Dimensions / Net Weight
547.5 × 382.5 - 512.5 × 230.0mm / 21.6 × 15.1 - 20.2 × 9.1" (W×H×D)
5.0kg / 11.0lbs
Tilt Angle
Upward: 22 degrees, Downward: 5 degrees, Left/Right: 45 degrees each
Environmental
Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
5 to 35°C / 41 to 95°F
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
Approvals CE, TÜV-Bauart, CU, VCCI-B, ENERGY STAR®
ENGLISH
APPENDIX 31
SPECIFICATIONS : ProLite X2474HV
Size Category 24"
LCD
Panel
Panel technology
VA
Size Diagonal: 23.6" (60cm)
Pixel pitch 0.272mm H × 0.272mm V
Brightness 250cd/m2 (Typical)
Contrast ratio 3000 : 1 (Typical), Adv. Contrast Function Available
Viewable angle
Right / Left : 89 degrees each, Up / Down: 89 degrees each (Typical)
Response time 4ms (Gray to Gray)
Display Colors Approx.16.7M
Sync Frequency Horizontal: 30.0-80.0kHz, Vertical: 55-75Hz
Native Resolution 1920 × 1080, 2.1 MegaPixels
Support max. resolution 1920 × 1080 60Hz
Input Connector VGA
Plug & Play VESA DDC2BTM
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal Analog: 0.7Vp-p (Standard), 75Positive
Maximum Screen Size 521.3mm W × 293.2mm H / 20.51" W × 11.54" H
Power Source 100-240VAC, 50/60Hz, 0.8A
Power Consumption 17W typical, Power management mode: 0.5W maximum
Dimensions / Net Weight 547.5 × 405.5 × 177.0mm / 21.6 × 16.0 × 7.0" (W×H×D)
3.2kg / 7.1lbs
Tilt Angle Upward: 20 degrees, Downward: 3 degrees
Environmental
Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
5 to 35°C / 41 to 95°F
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
Approvals CE, TÜV-Bauart, CU, VCCI-B, ENERGY STAR®
ENGLISH
32 APPENDIX
DIMENSIONS : ProLite X2474HS / ProLite X2474HV
547.5mm/21.6”
523.5mm/20.6”
295.0mm/11.6”
324.5mm/12.8”
200.0mm/7.8”
177.0mm/7.0”
41.0mm/1.6”
405.5mm/16.0”
DIMENSIONS : ProLite XB2474HS / ProLite XB2474HV
523.5mm/20.6”
547.5mm/21.6”
295.0mm/11.6”
324.5mm/12.8”
250.0mm/9.8”
230.0mm/9.1”
41.0mm/1.6”
382.5mm/15.1”(512.5mm/20.2”)
393.5mm/15.5”
( ) : Maximum adjustment range
ENGLISH
APPENDIX 33
M182A21
COMPLIANT TIMING
Video Mode Horizontal
Frequency Vertical
Frequency Dot Clock
VESA
VGA 640 × 480
31.469kHz 59.940Hz 25.175MHz
37.500kHz 75.000Hz 31.500MHz
37.861kHz 72.809Hz 31.500MHz
SVGA 800 × 600
35.156kHz 56.250Hz 36.000MHz
37.879kHz 60.317Hz 40.000MHz
46.875kHz 75.000Hz 49.500MHz
XGA 1024 × 768
48.363kHz 60.004Hz 65.000MHz
56.476kHz 70.069Hz 75.000MHz
60.023kHz 75.029Hz 78.750MHz
SXGA 1280 × 1024 63.981kHz 60.020Hz 108.000MHz
79.976kHz 75.025Hz 135.000MHz
WXGA+ 1440 × 900 55.935kHz 59.887Hz 106.500MHz
70.635kHz 74.984Hz 136.750MHz
WSXGA+ 1680 × 1050 65.290kHz 60.000Hz 146.250MHz
Full HD 1920 × 1080 66.590kHz 59.930Hz 138.500MHz
83.890kHz 74.970Hz 174.500MHz *
* HDMI/DisplayPort input only.
NOTE