iiyama X2485WS-B3 User Manual
Displayed below is the user manual for X2485WS-B3 by iiyama which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
ENGLISH
USER MANUAL
Thank you very much for choosing the
iiyama LCD monitor.
We recommend that you take a few
minutes to read carefully through
this brief but comprehensive manual
before installing and switching on the
monitor. Please keep this manual in a
safe place for your future reference.
ENGLISH
ENGLISH
Congratulations!
This product is TCO Certified for Sustainable IT
TCO Certified is an international third party sustainability certification for
IT products. TCO Certified ensures that the manufacture, use and
recycling of IT products reflect environmental, social and economic
responsibility. Every TCO Certified product model is verified by an
accredited independent test laboratory.
This product has been verified to meet all the criteria in TCO Certified, including:
Corporate Social Responsibility
Socially responsible production - working conditions and labor law in manufacturing country
Energy Efficiency
Energy efficiency of product and power supply. Energy Star compliant, where applicable
Environmental Management System
Manufacturer must be certified according to either ISO 14001 or EMAS
Minimization of Hazardous Substances
Limits on cadmium, mercury, lead & hexavalent chromium including requirements for mercury-free
products, halogenated substances and hazardous flame retardants
Design for Recycling
Coding of plastics for easy recycling. Limit on the number of different plastics used.
Product Lifetime, Product Take Back
Minimum one-year product warranty. Minimum three-year availability of spare parts. Product takeback
Packaging
Limits on hazardous substances in product packaging. Packaging prepared for recycling
Ergonomic, User-centered design
Visual ergonomics in products with a display. Adjustability for user comfort (displays, headsets)
Acoustic performance protection against sound spikes (headsets) and fan noise (projectors, computers)
Ergonomically designed keyboard (notebooks)
Electrical Safety, minimal electro-magnetic Emissions
Third Party Testing
All certified product models have been tested in an independent, accredited laboratory.
A detailed criteria set is available for download at www.tcodevelopment.com, where you can also
find a searchable database of all TCO Certified IT products.
TCO Development, the organization behind TCO Certified, has been an international driver in the
field of Sustainable IT for 20 years. Criteria in TCO Certified are developed in collaboration with
scientists, experts, users and manufacturers. Organizations around the world rely on TCO Certified
as a tool to help them reach their sustainable IT goals. We are owned by TCO, a non-profit
organization representing office workers. TCO Development is headquartered in Stockholm,
Sweden, with regional presence in North America and Asia.
For more information, please visit
www.tcodevelopment.com
ENGLISH
We reserve the right to change specifi cations without notice.
All trademarks used in this user manual are the property of their respective owners.
As an ENERGY STAR® Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines
for energy effi ciency .
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the address:
http://www.iiyama.com
You can access the Web page of different countries from there.
For displays with glossy bezels the user should consider the placement of the display as the
bezel may cause disturbing refl ections from surrounding light and bright surfaces.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC
Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU
“RoHS Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in
residential areas, business and light industrial premises and small-scale enterprises, inside as
well as outside of the buildings. All places of operation are characterised by their connection to
the public low voltage power supply system.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PL2485W
An approved power cord greater or equal to H05VVF, 3G, 0.75mm2 must be used.
ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................1
SAFETY PRECAUTIONS................................................................1
SPECIAL NOTES ON LCD MONITORS .........................................3
CUSTOMER SERVICE ...................................................................3
CLEANING ......................................................................................3
BEFORE YOU OPERATE THE MONITOR ..........................................4
FEATURES......................................................................................4
CHECKING THE CONTENTS OF THE PACKAGE ........................4
WALL MOUNTING ..........................................................................5
FITTING AND REMOVAL OF BASE : ProLite XB2485WSU ...........6
FITTING AND REMOVAL OF BASE : ProLite X2485WS ................7
CONTROLS AND CONNECTORS : ProLite XB2485WSU .............8
CONTROLS AND CONNECTORS : ProLite X2485WS ..................9
CONNECTING YOUR MONITOR : ProLite XB2485WSU ............10
CONNECTING YOUR MONITOR : ProLite X2485WS .................11
COMPUTER SETTING .................................................................12
ADJUSTING THE VIEWING ANGLE : ProLite X2485WS .............12
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE :
ProLite XB2485WSU .....................................................................13
PANEL ROTATION : ProLite XB2485WSU ...................................13
OPERATING THE MONITOR .............................................................14
ADJUSTMENT MENU CONTENTS ..............................................15
SCREEN ADJUSTMENTS ............................................................22
POWER MANAGEMENT FEATURE .............................................25
TROUBLE SHOOTING ......................................................................26
RECYCLING INFORMATION .............................................................27
APPENDIX ........................................................................................28
SPECIFICATIONS : ProLite XB2485WSU ....................................28
SPECIFICATIONS : ProLite X2485WS .........................................29
DIMENSIONS : ProLite XB2485WSU ...........................................30
DIMENSIONS : ProLite X2485WS ................................................30
COMPLIANT TIMING ....................................................................31
ENGLISH
FOR YOUR SAFETY 1
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR IF YOU ARE AWARE OF ANY PROBLEMS
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the
monitor and contact your dealer or iiyama service center immediately. Further use may be
dangerous and can cause fi re or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
fi re or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
any object inside may cause fi re, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fi re or electric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specifi ed power supply. Use of an incorrect voltage will
cause malfunction and may cause fi re or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objects on the cables. If damaged, the cables may cause fi re or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS
ENGLISH
2 FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or
smoky areas as it may cause fi re, electric shock or damage. You should also avoid areas where the
sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not
pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
fi re. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the
cabinet will be blocked and the monitor may overheat if the stand is removed. This may cause fi re
or damage. Operating the monitor on its back, side, upside down or on a carpet or any other soft
material may also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal
cable is disconnected. If you do not disconnect them, it may cause fi re or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable
itself as this may cause fi re or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may
damage your computer.
CAREFUL! PROTECT YOUR HANDS AND FINGERS
Be careful not to hurt your fi ngers or hands when you change the height or the angle.
Injury can occur if care is not taken to avoid fi nger contact with the displays base when adjusting
the height. (Just for height adjustable model.)
REMARK FOR 24/7 USAGE
This product is not specifi cally designed for 24/7 usage in all environments.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
ENGLISH
FOR YOUR SAFETY 3
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE
When you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture position to
the correct position.
You may fi nd slightly uneven brightness on the screen depending on the desktop pattern
you use.
Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screen can be recovered slowly by changing the image or turning off the Power Switch
for some hours.
SPECIAL NOTES ON LCD MONITORS
If you have to return your unit for service and the original packaging has been discarded,
please contact your dealer or iiyama service center for advice or replacement packaging.
WARNING
If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.
CAUTION
For safety reasons, turn off the power switch and unplug the monitor before you
clean it.
To protect the LCD panel, do not scratch or rub the screen with a hard object.
Never use any of the following strong solvents. These will damage the cabinet and
the LCD screen.
Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
Thinner
Benzine
Abrasive cleaner
Spray-type cleaner
Wax
Acid or Alkaline solvent
CABINET Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
LCD
SCREEN
Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
CUSTOMER SERVICE
CLEANING
NOTE
NOTE
ENGLISH
4 BEFORE YOU OPERATE THE MONITOR
The following accessories are included in your package. Check to see if they are enclosed with
the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional
iiyama offi ce.
BEFORE YOU OPERATE THE MONITOR
CHECKING THE CONTENTS OF THE PACKAGE
FEATURES
Supports Resolutions up to 1920 × 1200
High Contrast 1000:1 (Typical), Adv. Contrast Function Available / Brightness
250cd/m2 (Typical)
Digital Character Smoothing
Automatic Set-up
Stereo Speakers
2 × 1.5W Stereo Speakers
Plug & Play VESA DDC2B Compliant
Windows® XP/Vista/7/8/8.1/10 Compliant
Power Management (ENERGY STAR® VESA DPMS Compliant)
Ergonomic Design TCO Certifi ed
VESA Mounting Standard (100mm×100mm) Compliant
Keyhole for Security Lock
*1 The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/250V
must be used. However, all guarantees and warranties are void for any
problems or damage caused by a power cable not supplied by iiyama.
*2 Accessory for ProLite XB2485WSU.
*3 Accessory for ProLite X2485WS.
Power Cable*1
DVI-D Signal Cable
DisplayPort Cable
USB Cable*2
Audio Cable
Stand-Base (Screw for stand fi xing attached)*2
Stand-Base*3
Cable Holder*2
Safety Guide
Quick Start Guide
CAUTION
ENGLISH
BEFORE YOU OPERATE THE MONITOR 5
When you use with the wall mounting, in consideration of thickness of the mounting
stage, tighten the M4 Screw with washer which “L” length is 10mm to fasten the
monitor. Using the screw longer than this may cause electric shock or damage
because it may contact with the electrical parts inside the monitor.
Please check if the wall or ceiling can support the weight of the monitor before
mounting it.
WALL MOUNTING
WARNING
Screw
Chassis
Mounting Stage
L
ENGLISH
6 BEFORE YOU OPERATE THE MONITOR
Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid electric shock or damage.
CAUTION
FITTING AND REMOVAL OF BASE : ProLite XB2485WSU
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor fl at on a table with front face down.
Install the Stand-Base to the Monitor.
Fix the Monitor to the Stand by the screw fi rmly and the push-down knob.
Place the Cable Holder.
<Remove>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor fl at on a table with front face down.
Pull up the knob, then remove the screws and the Stand-Base.
Cable Holder Stand-Base
Thumb screw
for Stand-Base fi xing
Stand-Base
ENGLISH
BEFORE YOU OPERATE THE MONITOR 7
Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid electric shock or damage.
CAUTION
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor fl at on a table with front face down.
Hold the monitor and push the Stand-Base until it clicks and is secure.
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor fl at on a table with front face down.
Press and hold the hooks inside, and pull the Stand-Base.
FITTING AND REMOVAL OF BASE : ProLite X2485WS
Stand-Base
Stopper
ENGLISH
8 BEFORE YOU OPERATE THE MONITOR
CONTROLS AND CONNECTORS : ProLite XB2485WSU
<Front> <Back>
Power Indicator
Blue: Normal operation
Orange: Power Management
Power Switch ( )
Menu Button (MENU)
Scroll Up / Volume Button ( / )
Scroll Down / ECO Button ( / )
Auto Button (AUTO)
Headphone connector ( )
Speakers
USB Downstream Connector ( )
USB Downstream Connector ( )
USB Downstream Connector ( )
USB Upstream Connector ( )
VGA(D-sub) mini 15pin Connector (D-SUB)
DVI-D 24pin Connector (DVI)
DisplayPort Connector (DP)
Audio Connector (AUDIO IN)
AC Connector( : Alternating current) (AC IN)
Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
NOTE
NOTE
ENGLISH
BEFORE YOU OPERATE THE MONITOR 9
CONTROLS AND CONNECTORS : ProLite X2485WS
<Front> <Back>
Power Indicator
Blue: Normal operation
Orange: Power Management
Power Switch ( )
Menu Button (MENU)
Scroll Up / Volume Button ( / )
Scroll Down / ECO Button ( / )
Auto Button (AUTO)
Headphone connector ( )
Speakers
VGA(D-sub) mini 15pin Connector (D-SUB)
DVI-D 24pin Connector (DVI)
DisplayPort Connector (DP)
Audio Connector (AUDIO IN)
AC Connector( : Alternating current) (AC IN)
Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
NOTE
NOTE
ENGLISH
10 BEFORE YOU OPERATE THE MONITOR
CONNECTING YOUR MONITOR : ProLite XB2485WSU
Ensure that both the computer and the monitor are switched off.
Connect the computer to the monitor with the signal cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
Connect the Power Cable to the monitor fi rst and then to the power supply.
Turn on your monitor and computer.
[Example of Connection]
<Back>
NOTE The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regional iiyama offi ce.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama offi ce for a suitable adaptor.
Make sure you tighten the fi nger screws at each end of the signal cable.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
[ Collect Cables ]
Put the cables through the cable holder.
Collect cables at the back of the stand.
Power Cable
(Accessory)
Audio Cable (Accessory) Computer
VGA(D-sub) Signal Cable
(Not included)
DVI-D Cable (Accessory)
USB Cable (Accessory)
Mouse Keyboard
DisplayPort Cable (Accessory)
*
VGA (D-Sub) cable is not supplied with the monitor; you need to use a special VGA (D-Sub) cable
dedicated for this model. Please contact the iiyama Support Centre in your country if you wish to
connect the monitor via the VGA input.
ENGLISH
BEFORE YOU OPERATE THE MONITOR 11
CONNECTING YOUR MONITOR : ProLite X2485WS
Ensure that both the computer and the monitor are switched off.
Connect the computer to the monitor with the signal cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
Connect the Power Cable to the monitor fi rst and then to the power supply.
Turn on your monitor and computer.
[Example of Connection]
<Back>
NOTE The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regional iiyama offi ce.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama offi ce for a suitable adaptor.
Make sure you tighten the fi nger screws at each end of the signal cable.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Power Cable
(Accessory)
Audio Cable (Accessory) Computer
VGA(D-sub) Signal Cable
(Not included)
DVI-D Cable (Accessory)
DisplayPort Cable (Accessory)
*
VGA (D-Sub) cable is not supplied with the monitor; you need to use a special VGA (D-Sub) cable
dedicated for this model. Please contact the iiyama Support Centre in your country if you wish to
connect the monitor via the VGA input.
ENGLISH
12 BEFORE YOU OPERATE THE MONITOR
Signal Timing
Change to the desired signal timing listed on page 33: COMPLIANT TIMING.
COMPUTER SETTING
For optimal viewing it is recommended to look at the full face
of the monitor.
Hold the stand so that the monitor does not topple when you
change the monitor’s angle.
You are able to adjust the monitor’s angle up to 22 degrees
upward and 5 degrees downward.
In order to ensure a healthy and relaxed body position
when using the monitor at visual display workstations, it
is recommended that the adjusted tilt angle should not
exceed 10 degrees. Adjust the monitor’s angle to your own
preference.
NOTE Do not touch the LCD screen when you change
the angle. It may cause damage or break the LCD
screen.
Careful attention is required not to catch your
fi ngers or hands when you change the angle.
ADJUSTING THE VIEWING ANGLE : ProLite X2485WS
ENGLISH
BEFORE YOU OPERATE THE MONITOR 13
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite XB2485WSU
For optimal viewing it is recommended to
position yourself directly opposite to the full face
of the monitor, then adjust the monitor’s height
and angle to your own preference.
Hold the panel so that the monitor does not topple
when you change the monitor’s height or angle.
You are able to adjust the monitor's height up to
110mm, angle up to 160 degrees right and left,
22 degrees upward and 5 degrees downward.
Do not touch the LCD screen when you
change the height or the angle. It
may cause damage or break the LCD
screen.
Careful attention is required not to
catch your fingers or hands when you
change the height or the angle.
Injury can occur if care is not taken to
avoid fi nger contact with the displays
base when adjusting the height.
NOTE
PANEL ROTATION : ProLite XB2485WSU
Adjust the mother’s height.
Rotate the panel 90 degrees.
Portrait: Turn clockwise.
Landscape: Turn counter clockwise.
Attempting to rotate without fully extending
upward may cause damage to stand.
Video card for portrait display will be
required for rotating the image on the
screen.
Adjust the monitor’s angle to your preference.
NOTE
Monitor
Stand
90°
110mm
ENGLISH
14 OPERATING THE MONITOR
Picture
OSD
Display
Audio Settings
Miscellaneous
Information
Brightness
Contrast
H.Position
V.Position
Phase
Clock
Color Temp
Auto Adjust
90
80
50
50
41
50
6500
1920x1200
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 33. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 22 for SCREEN ADJUSTMENTS.
Press the MENU Button to start the On Screen Display feature. There are additional
Menu items which can be switched by using the / Buttons.
Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Press the MENU Button. Then, use the / Buttons to highlight
the desired adjustment icon.
Press the MENU Button again. Use the / Buttons to make the appropriate
adjustment or setting.
Press the AUTO Button to leave the menu, and the settings you just made would
be automatically saved.
When button operations are aborted during adjustment, On-Screen Display disappears when the
time set for the OSD Timeout has passed. Also, press the AUTO button to quickly turn off the On-
Screen Display.
Any changes are automatically saved in the memory when the On Screen Display
disappears.
Turning off the power should be avoided while using the Menu.
Adjustments for H. / V. Position, Clock and Phase are saved for each signal timing. Except for
these adjustments, all other adjustments have only one setting which applies to all signal timings.
NOTE
For example, to correct for vertical position, select Menu item of Picture and then press the
MENU Button. Then, select V.Position by using the / Buttons.
An adjustment page appears after you press the MENU Button. Then, use the / Buttons
to change the vertical position settings. The vertical position of the overall display should be
changing accordingly while you are doing this.
Press the AUTO Button lastly, it ends, all changes are saved in the memory.
Picture
OSD
Display
Audio Settings
Miscellaneous
Information
6500
1920x1200
Brightness
Contrast
H.Position
V.Position
Phase
Clock
Color Temp
Auto Adjust
90
80
50
50
41
50
ENGLISH
OPERATING THE MONITOR 15
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option Button to Press
Picture
Phase*2,3
Clock*2,3
Too left
Too right
Too low
Too high
H. Position*2,3
V. Position*2,3
Too narrow
Too wide
To correct fl ickering text or lines
Too dark
Too bright
Brightness*1,5,6
Contrast *5Too dull
Too intense
Yellowish white
Reddish white
Green
Blue
Too weak
Too strong
User
Bluish white
Color Temp
7500
9300
6500
Auto Adjust*3,4 Adjust H. / V. Position, Clock and Phase automatically.
Picture
OSD
Display
Audio Settings
Miscellaneous
Information
Brightness
Contrast
H.Position
V.Position
Phase
Clock
Color Temp
Auto Adjust
90
80
50
50
41
50
6500
1920x1200
Red
Direct
Matrix
Green
Blue
Red
Magenta
Yellow
Cyan You can set the Colours.
ENGLISH
16 OPERATING THE MONITOR
*1 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
bright.
*2 See page 22 for SCREEN ADJUSTMENTS.
*3 Only Analog Input.
*4 For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 22 for
SCREEN ADJUSTMENTS.
*5 Contrast and Brightness adjustment disabled when i-Style Color is set to Game or Movie or Text
or Scenery.
*6 Brightness adjustment disabled when Adv. Contrast is active or when ECO Mode is active.
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
Direct
Auto Adjust: Press the AUTO Button when the Menu is not displayed.
ENGLISH
OPERATING THE MONITOR 17
OSD T imeout
H.Position OSD is too left
OSD is too right
OSD is too low
OSD is too high
You can set the OSD display duration time
between 5 and 30 seconds.
Adjustment Item Problem / Option Button to Press
OSD
V.Position
H.Position
V.Position
OSD Timeout
Transparency
90
10
10
25
1920x1200
Picture
OSD
Display
Audio Settings
Miscellaneous
Information
Transparency You can set the transmittance of the OSD
background.
ENGLISH
18 OPERATING THE MONITOR
Adv. Contrast *2
Increased Contrast Ratio
On
Off Typical Contrast Ratio
Display Mode
Expansion display
Full
Aspect Expansion display of Aspect
Over Drive
Off / -2 / -1 / 0 / +1 / +2
It will improve the gray level response time of the
LCD panel.
A higher level results in a faster response time.
Adjustment Item Problem / Option Button to Press
Display
Display Mode
i-Style Color
Adv. Contrast
X-Res Technology
Sharpness
Over Drive
Gamma
Blue Light Reducer
50
0
Full
1920x1080
Picture
OSD
Display
Audio Settings
Miscellaneous
Information
Standard
Off
Off
2.2
Off
Standard
Text
Cinema
Game
Scenery
i-Style Color *1,2,3
Sharpness
For general windows environment and monitor
default setting.
For text editing and viewing in a word processing
environment.
For PC game environment.
For movie and video environment.
For displaying outdoor scenery images
*1 i-Style Color cannot be adjusted and selected while Adv. Contrast is active.
*2 i-Style Color and Adv. Contrast cannot be adjusted and selected while ECO Mode is active.
*3 i-Style Color is disabled when Blue Light Reducer is activated.
*4 Blue Light Reducer is disabled when i-Style Color is activated.
Too soft
Too sharp
Gamma 1.8 / 2.0 / 2.2 / 2.4
You can set the Gamma.
1:1 Displayed at the same magnifi cation
Enhance the picture edge.
Off Normal
Soft
Hard
X-Res Technology
Enhance the picture edge more than the Soft option.
Blue Light Reducer *4
Off Typical
1Blue light is reduced.
2Blue light is reduced more than Mode1.
3Blue light is reduced more than Mode2.
ENGLISH
OPERATING THE MONITOR 19
Audio Input*
Volume
Adjustment Item Problem / Option Button to Press
Audio Settings
Mute
Volume
Mute
Audio Input
50
1920x1200
Picture
OSD
Display
Audio Settings
Miscellaneous
Information
Off
Line in
Too soft
Too loud
Return the sound volume to the previous level.
Turn off the sound temporarily.
Off
On
Select the DP input.
Line in Select the LINE IN input.
DP
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
Direct
Volume: Press the Button when the Menu is not displayed.
Direct
* Suitable for DisplayPort input only.
ENGLISH
20 OPERATING THE MONITOR
Language
Adjustment Item Problem / Option Button to Press
Miscellaneous
Input Select
Language
Input Select
Opening Logo
After AC Cut
ECO Mode
Reset
1920x1200
Picture
OSD
Display
Audio Settings
Miscellaneous
Information
English
Auto
Off
Off
Off
English
Deutsch English
German
Français French
Japanese
Italiano Italian
Simplifi ed Chinese
Español Spanish
Traditional Chinese
However it will automatically be selected when just one source is using.
In Power Management Mode input switching is disabled.
Input source is fi xed, not selected automatically when VGA, DVI and DisplayPort which
are selected.
NOTE
Select the D-SUB input.
Select the DVI input.
VGA
DVI
Auto Select the signal input automatically.
Select the DisplayPort input. Displayport
Direct
Reset Factory-preset data is restored.
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
Input Select: Pressing and holding of the AUTO Button for 3 seconds when the Menu is not
displayed.
ECO Mode: Press the Button when the Menu is not displayed.
Direct
Dutch
Russian
Nederlands
iiyama Logo displayed when the monitor is turned on.
On
Off iiyama Logo does not display when the monitor is
turned on.
Opening Logo
Monitors stays in off mode when power is back.
To turn the monitor back on, press the power
switch.
On
Off When power is back, the monitor returns to the mode
it was in before AC loss.
After AC Cut
NOTE
ECO Mode *
Off Normal
Direct
Mode1 Brightness of back-light is reduced.
Brightness of back-light is reduced more than Mode1.
Mode3
Brightness of back-light is reduced more than Mode2.
Mode2
* ECO Mode cannot be adjusted and selected while Adv. Contrast is active.
ENGLISH
OPERATING THE MONITOR 21
Adjustment Item Problem / Option Button to Press
Information
1920x1200
H:74kHz V:60Hz
Auto
SN: xxxxxxxxxxxxx
1920x1200
Picture
OSD
Display
Audio Settings
Miscellaneous
Information
See your graphic card user guide for more information
about changing the resolution and refresh.
NOTE
Displays information regarding the current input signal coming
from the graphic card in your computer.
Information
● Lock Mode
<OSD Menu>
1. The OSD lock will be activated by pressing the front buttons MENU and for about 10 seconds.
If you try to access the OSD by pressing any of the buttons MENU, , and AUTO, message
"OSD Lock" will appear on the screen.
2. The OSD lock will be deactivated by pressing the front buttons MENU and again for about 10
seconds.
<Power Switch>
1. The power switch lock will be activated by pressing the front buttons MENU and for about 10
seconds. Locking the power switch means that won't be able to turn off the Monitor while the
power switch is locked. If presses the power switch massage "Power Lock" will appear on the
screen.
2. The power switch lock will be deactivated by pressing the front buttons MENU and again for
about 10 seconds.
ENGLISH
22 OPERATING THE MONITOR
SCREEN ADJUSTMENTS
The screen adjustments described in this manual are designed to set image position and minimize
fl icker or blur for the particular computer in use.
The monitor is designed to provide the best performance at resolution of 1920 × 1200, but can not
provide the best at resolutions of less than 1920 × 1200 because the picture is automatically stretched
to fi t the full screen. It is recommended to operate at resolution of 1920 × 1200 in normal use.
Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to
the screen enlargement process.
It is preferable to adjust the image position and frequency with the monitor controls, rather than
the computer software or utilities.
Perform adjustments after a warm-up period of at least thirty minutes.
Additional adjustments may be required after the Auto Image Adjust depending on the resolution
or signal timing.
The Auto Image Adjust may not work correctly when displaying the picture other than the screen
adjustment pattern. In this case, manual adjustments are required.
There are two ways to adjust the screen. One way is automatic adjustment for Position, Clock and
Phase. The other way is performing each adjustment manually.
Perform the Auto Image Adjust fi rst when the monitor is connected to a new computer, or resolution
is changed. If the screen has a fl icker or blur, or the picture does not fi t in the display area after
performing the Auto Image Adjust, manual adjustments are required. Both adjustments should be
made by using the screen adjustment pattern (Test.bmp) obtained via the IIYAMA web site (http://
www.iiyama.com).
Adjust the image by following the procedure below to get the desired picture.
This manual explains adjustment under Windows® OS.
Display the picture at the optimum resolution.
Enter the Test.bmp (screen adjustment pattern) to wallpaper. OTE
Adjust the image by following the procedure below to get the desired picture when selecting Analog input.
NOTE
Zebra pattern
Color bar
Picture frame
[Adjustment pattern]
Consult the appropriate documentation for doing this.
Test.bmp is made at resolution of 1280 × 1024. Set the display position to center in
the wallpaper setting dialogue box.
ENGLISH
OPERATING THE MONITOR 23
1) Adjust the H.Position so that the left side of the picture frame will move to the left edge
of the display area.
When the left side of the picture frame moves apart from the left edge of the display
area during the Clock adjustment, adjust steps 1) and 2).
Another way to make the Clock adjustment is to correct the vertical wavy lines in the
zebra pattern.
The picture may fl icker during the Clock, H.Position and V.Position adjustment.
In case the picture frame is bigger or smaller than the data display area after the
Clock adjustment, repeat steps from .
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the Clock.
Press the AUTO Button. (Auto Adjust)
Adjust the image manually by following procedure below when the screen has a fl icker or
blur, or the picture does not fi t in the display area after performing the Auto Image Adjust.
Adjust the V.Position so that the top and bottom of the picture frame will fi t to the display
area.
NOTE
ENGLISH
24 OPERATING THE MONITOR
In case the strong fl icker or blurs remain on a part of the screen, repeat steps
and
because the Clock may not be adjusted correctly. If the fl icker or blurs still remain,
set the refresh rate of computer to low (60Hz) and repeat steps from
again.
Adjust the H.Position after the Phase adjustment if the horizontal position moves
during the adjustment.
Adjust the Phase to correct horizontal wavy noise, fl icker or blur in the zebra pattern.
NOTE
Adjust the Brightness and Color to get the desired picture after you complete the Clock
and Phase adjustments.
Put back your favorite wallpaper.
ENGLISH
OPERATING THE MONITOR 25
Even when using the power management mode, the monitor consumes electricity. Turn
off the Power Switch whenever the monitor is not in use, during the night and weekends,
to avoid unnecessary power consumption.
It is possible that the video signal from the computer may be on while the H or V sync
signal is missing. In this instance, the POWER MANAGEMENT feature may not work
properly.
POWER MANAGEMENT FEATURE
Power Management Mode
When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the
monitor enters into Power Management Mode which reduces the power consumption to less
than 0.5W. The screen becomes dark, and the power indicator turns to orange. From Power
Management Mode, the image reappears in several seconds when either the keyboard or the
mouse are touched again.
The power management feature of this product complies with power saving requirement of ENERGY
STAR® and VESA DPMS. When activated, it automatically reduces unnecessary power consumption
of the monitor when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer.
There is a power management step the monitor takes as described below. The power management
function, including any timer settings is confi gured by the operating system. Check your operating
system manual for information on how this can be confi gured.
0 0.5W 100%
POWER
CONSUMPTION
Blue
Orange
Power Indicator
NORMAL MODE
POWER MANAGEMENT MODE
NOTE
ENGLISH
26 TROUBLE SHOOTING
TROUBLE SHOOTING
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem
you have. If the monitor does not get a picture, skip to 2.
2. Consult the following items if you cannot fi nd an appropriate adjustment item in OPERATING THE
MONITOR or if the problem persists.
3.
If you are experiencing a problem which is not described below or you cannot correct the problem,
discontinue using the monitor and contact your dealer or iiyama service center for further assistance.
Problem Check
(Power indicator
is orange.)
The screen is not
synchronized.
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
(Power indicator
is blue.)
The picture does
not appear.
(Power indicator
does not light up.)
The Power Cable is fi rmly seated in the socket.
The Power Switch is turned ON.
The AC socket is live. Please check with another piece of equipment.
If the blank screen saver is in active mode, touch th e keyboa rd or the mo u se.
Increase the Contrast and/or Brightness.
The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.
If the mo n i to r is i n powe r ma n ag e m e n t mo d e , tou ch the key bo a rd or the m o u se .
The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.
The video output level of the computer is within th e specifi cation of the monitor .
The signal timing of the computer is within the specifi cation of the monitor.
The video output level of the computer is within the specifi cation of the
monitor.
The power voltage is within the specifi cation of the monitor.
The signal timing of the computer is within the specifi cation of the monitor.
The screen
position is not in
the center.
The screen is too
bright or too dark.
The screen is
shaking.
ENGLISH
TROUBLE SHOOTING / RECYCLING INFORMATION 27
No sound.
The audio equipment (computer etc.) is ON.
The Audio Cable is properly connected.
The Volume is turned up.
The Mute is OFF.
The audio output level of the audio equipment is within the specifi cation
of the monitor.
The audio output level of the audio equipment is within the specifi cation
of the monitor.
The Audio Cable is properly connected.
The sound is too
loud or too quiet.
A strange noise is
heard.
For better environment protection please don't dispose your monitor.
Please visit our web site: www.iiyama.com/recycle for monitor recycling.
RECYCLING INFORMATION
Problem Check
ENGLISH
28 APPENDIX
SPECIFICATIONS : ProLite XB2485WSU
APPENDIX
Design and specifi cations are subject to change without prior notice.
*1 When set to Over Drive +2.
*2 Condition: USB peripherals and audio-video equipment are not connected.
LCD
Panel
0.27mm H × 0.27mm V
Response time
Pixel pitch
4ms (Gray to Gray)*1
Display Colours Approx.16.7M
Sync Frequency Analog: Horizontal: 30.0-94.0kHz, Vertical: 50-75Hz
Digital: Horizontal: 30.0-80.0kHz, Vertical: 50-75Hz
Maximum Resolution 1920 × 1200, 2.3 MegaPixels
Input Connector VGA(D-sub) mini 15 pin, DVI-D 24 pin, DisplayPort
Input Sync Signal Separate sync: TTL, Positive or Negative
Plug & Play VESA DDC2BTM
24W typical, Power management mode: 0.5W maximumPower Consumption*2
Dimensions / Net Weight
561.0 × 416.0 - 526.0 × 244.5mm / 22.1 × 16.4 - 20.7 × 9.6" (W×H×D)
6.6kg / 14.5lbs
Upward: 22 degrees, Downward: 5 degrees, Left/Right: 160 degrees each
Viewable angle Right / Left: 89 degrees each, Up / Down: 89 degrees each (Typical)
Maximum Screen Size 518.4mm W × 324.0mm H / 20.4" W × 12.8" H
Power Source 100-240VAC, 50/60Hz, 1.5A
Environmental
Considerations
Approvals
TCO Certifi ed, CE, TÜV-GS, VCCI-B, CU, ENERGY STAR
®
T ilt Angle
Brightness
Contrast ratio
250cd/m2 (Typical)
1000 : 1 (Typical)
Analog: 0.7Vp-p (Standard), 75Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
Digital: DisplayPort (Ver. 1.2)
Input Video Signal
Input Audio Signal 1.0Vrms maximum
Speakers 1.5W × 2 (Stereo speakers)
Input Audio Connector ø 3.5mm mini jack (Stereo)
Operating:
Storage:
5 to 35°C / 41 to 95°F
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
Temperature
Humidity
Temperature
Humidity
Size Category 24"
Diagonal: 24.1" (61.13cm)Size
NOTE
USB Standard USB2.0
Number of USB Ports
Connector shape 1 Upstream : Series B
4 Downstream : Series A
Headphone Connector ø 3.5mm mini jack (Stereo)
IPS technologyPanel technology
ENGLISH
APPENDIX 29
SPECIFICATIONS : ProLite X2485WS
*1 When set to Over Drive +2.
*2 Audio equipment is not connected.
LCD
Panel
0.27mm H × 0.27mm V
Response time
Pixel pitch
4ms (Gray to Gray)*1
Display Colours Approx.16.7M
Sync Frequency Analog: Horizontal: 30.0-94.0kHz, Vertical: 50-75Hz
Digital: Horizontal: 30.0-80.0kHz, Vertical: 50-75Hz
Maximum Resolution 1920 × 1200, 2.3 MegaPixels
Input Connector VGA(D-sub) mini 15 pin, DVI-D 24 pin, DisplayPort
Input Sync Signal Separate sync: TTL, Positive or Negative
Plug & Play VESA DDC2BTM
24W typical, Power management mode: 0.5W maximumPower Consumption*2
Dimensions / Net Weight 561.0 × 449.0 × 216.5mm / 22.1 × 17.7 × 8.5" (W×H×D)
4.8kg / 10.6lbs
Upward: 22 degrees
, Downward: 5 degrees
Viewable angle Right / Left: 89 degrees each, Up / Down: 89 degrees each (Typical)
Maximum Screen Size 518.4mm W × 324.0mm H / 20.4" W × 12.8" H
Power Source 100-240VAC, 50/60Hz, 1.5A
Environmental
Considerations
Approvals
TCO Certifi ed, CE, TÜV-GS, VCCI-B, CU, ENERGY STAR
®
T ilt Angle
Brightness
Contrast ratio
250cd/m2 (Typical)
1000 : 1 (Typical)
Analog: 0.7Vp-p (Standard), 75Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
Digital: DisplayPort (Ver. 1.2)
Input Video Signal
Input Audio Signal 1.0Vrms maximum
Speakers 1.5W × 2 (Stereo speakers)
Input Audio Connector ø 3.5mm mini jack (Stereo)
Operating:
Storage:
5 to 35°C / 41 to 95°F
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
Temperature
Humidity
Temperature
Humidity
Size Category 24"
Diagonal: 24.1" (61.13cm)Size
NOTE
Headphone Connector ø 3.5mm mini jack (Stereo)
IPS technologyPanel technology
ENGLISH
30 APPENDIX
DIMENSIONS : ProLite XB2485WSU
( ) : Maximum adjustment range
520.0mm/20.5”
561.0mm/22.1”
325.5mm/12.8”
380.0mm/15.0”
51.0mm/2.0”
416.0mm/16.4”(526.0mm/20.7”)
244.5mm/9.6”
DIMENSIONS : ProLite X2485WS
520.0mm/20.5”
561.0mm/22.1”
325.5mm/12.8”
380.0mm/15.0”
234.5mm/9.2”
216.5mm/8.5”
51.0mm/2.0”
449.0mm/17.7”
ENGLISH
APPENDIX 31
M106D41
COMPLIANT TIMING
Dot Clock
25.175MHz
31.500MHz
31.500MHz
36.000MHz
40.000MHz
49.500MHz
50.000MHz
65.000MHz
75.000MHz
78.750MHz
108.000MHz
135.000MHz
106.500MHz
146.250MHz
138.500MHz
154.000MHz
Vertical
Frequency
59.940Hz
75.000Hz
72.809Hz
56.250Hz
60.317Hz
75.000Hz
72.188Hz
60.004Hz
70.069Hz
75.029Hz
60.020Hz
75.025Hz
59.887Hz
60.000Hz
59.930Hz
59.950Hz
VESA
SVGA
VGA
XGA 1024 × 768
640 × 480
800 × 600
Horizontal
Frequency
31.469kHz
37.500kHz
37.861kHz
35.156kHz
37.879kHz
46.875kHz
48.077kHz
48.363kHz
56.476kHz
60.023kHz
63.981kHz
79.976kHz
55.935kHz
65.290kHz
66.590kHz
74.038kHz
Video Mode
SXGA 1280 × 1024
WXGA+ 1440 × 900
WSXGA+
1680 × 1050
Full HD 1920 × 1080
WUXGA 1920 × 1200