iiyama X3272UHS-B1 User Manual
Displayed below is the user manual for X3272UHS-B1 by iiyama which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
ENGLISH
USER MANUAL
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes
to read this comprehensive manual carefully
before installing and switching on the monitor.
Please keep this manual in a safe place for
your future reference.
ENGLISH
ENGLISH
We reserve the right to change specifi cations without notice.
All trademarks used in this user manual are the property of their respective owners.
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the address:
http://www.iiyama.com
You can access the Web page of diff erent countries from there.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC
Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU
“RoHS Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in
residential areas, business and light industrial premises and small-scale enterprises, inside as
well as outside of the buildings. All places of operation are characterised by their connection to
the public low voltage power supply system.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PL3272UH
ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................1
SAFETY PRECAUTIONS................................................................1
SPECIAL NOTES ON LCD MONITORS .........................................3
CUSTOMER SERVICE ...................................................................3
CLEANING ......................................................................................3
BEFORE YOU OPERATE THE MONITOR ..........................................4
FEATURES......................................................................................4
CHECKING THE CONTENTS OF THE PACKAGE ........................4
WALL MOUNTING ..........................................................................5
CONTROLS AND CONNECTORS..................................................6
CONNECTING YOUR MONITOR ...................................................7
COMPUTER SETTING ...................................................................8
ADJUSTING THE VIEWING ANGLE ..............................................8
OPERATING THE MONITOR ...............................................................9
ADJUSTMENT MENU CONTENTS ..............................................10
POWER MANAGEMENT FEATURE .............................................17
TROUBLE SHOOTING ......................................................................18
RECYCLING INFORMATION .............................................................19
APPENDIX ........................................................................................20
SPECIFICATIONS .........................................................................20
DIMENSIONS ................................................................................21
COMPLIANT TIMING ....................................................................21
ENGLISH
FOR YOUR SAFETY 1
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the
monitor and contact your dealer or iiyama service center immediately. Further use may be
dangerous and can cause fi re or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
fi re or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
any object inside may cause fi re, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fi re or electric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specifi ed power supply. Use of an incorrect voltage will
cause malfunction and may cause fi re or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objects on the cables. If damaged, the cables may cause fi re or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS
ENGLISH
2 FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or
smoky areas as it may cause fi re, electric shock or damage. You should also avoid areas where the
sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not
pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
fi re. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the
cabinet will be blocked and the monitor may overheat if the stand is removed. This may cause fi re
or damage. Operating the monitor on its back, side, upside down or on a carpet or any other soft
material may also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal
cable is disconnected. If you do not disconnect them, it may cause fi re or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable
itself as this may cause fi re or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may
damage your computer.
CAREFUL! PROTECT YOUR HANDS AND FINGERS
Be careful not to hurt your fi ngers or hands when you change the height or the angle.
Injury can occur if care is not taken to avoid fi nger contact with the displays base when adjusting
the height. (Just for height adjustable model.)
REMARK FOR 24/7 USAGE
This product is not specifi cally designed for 24/7 usage in all environments.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
ENGLISH
FOR YOUR SAFETY 3
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE
When you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture position to
the correct position.
You may find slightly uneven brightness on the screen depending on the desktop
pattern you use.
Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screen can be recovered slowly by changing the image or turning off the Power Switch
for some hours.
SPECIAL NOTES ON LCD MONITORS
NOTE
If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
WARNING
If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.
CAUTION
For safety reasons, turn off the power switch and unplug the monitor before you
clean it.
NOTE
To protect the LCD panel, do not scratch or rub the screen with a hard object.
Never use any of the following strong solvents. These will damage the cabinet and
the LCD screen.
Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
Thinner
Benzine
Abrasive cleaner
Spray-type cleaner
Wax
Acid or Alkaline solvent
CABINET Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
LCD
SCREEN
Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
CUSTOMER SERVICE
CLEANING
ENGLISH
4 BEFORE YOU OPERATE THE MONITOR
The following accessories are included in your package. Check to see if they are enclosed with
the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional
iiyama offi ce.
* The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used. However, all guarantees and warranties are void for any
problems or damage caused by a power cable not supplied by iiyama.
Power Cable*
HDMI Cable DisplayPort Cable
Headphone hook Safety Guide Quick Start Guide
BEFORE YOU OPERATE THE MONITOR
CHECKING THE CONTENTS OF THE PACKAGE
CAUTION
FEATURES
Supports Resolutions up to 3840 × 2160
High Contrast 3000:1 (Typical), Adv. Contrast Function Available / Brightness
300cd/m2 (Typical) / Quick Respons Time 3ms (Gray to Gray)
Flicker - Free
Blue Light Reducer
Digital Character Smoothing
Stereo Speakers
2 × 2W Stereo Speakers
Plug & Play VESA DDC2B Compliant
Windows® 7/8.1/10 Compliant
Power Management (VESA DPMS Compliant)
VESA Mounting Standard (100mm×100mm) Compliant
Keyhole for Security Lock
ENGLISH
BEFORE YOU OPERATE THE MONITOR 5
When you use with the wall mounting, in consideration of thickness of the mounting
stage, tighten the M4 Screw with washer which “L” length is 9mm to fasten the
monitor. Using the screw longer than this may cause electric shock or damage
because it may contact with the electrical parts inside the monitor.
Please check if the wall or ceiling can support the weight of the monitor before
mounting it.
WALL MOUNTING
WARNING
Screw
Mounting Stage
LChassis
ENGLISH
6 BEFORE YOU OPERATE THE MONITOR
Power Indicator
White: Normal operation
Orange: Power Management
Headphone hook*
Navigation Button
Power Switch / Menu
Scroll Up ( )
Scroll Down / ECO Mode
(
)
Left / Input Select ( )
Right / Audio Adjust ( )
Keyhole for Security Lock
You can fasten a security lock
and cable to prevent the monitor
from being removed without your
permission.
Headphone Connector ( )
DisplayPort Connecto (DP)
HDMI Connector (HDMI2)
HDMI Connector (HDMI1)
AC Connector( : Alternating current) ( )
Speakers
* If necessary, install the included Headphone
hook, turn and secure it.
NOTE
NOTE
CONTROLS AND CONNECTORS
<Front>
<Back>
ENGLISH
BEFORE YOU OPERATE THE MONITOR 7
CONNECTING YOUR MONITOR
Ensure that both the computer and the monitor are switched off .
Connect the computer to the monitor with the signal cable.
Connect the Power Cable to the monitor fi rst and then to the power supply.
Turn on your monitor and computer.
To turn off your monitor, press and hold the Power Switch for 3 seconds when the menu is not
displayed.
[Example of Connection]
<Back>
NOTE The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regional iiyama offi ce.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama offi ce for a suitable adaptor.
Make sure you tighten the fi nger screws at each end of the signal cable.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.
Power Cable (Accessory)
Computer
HDMI Cable (Accessory)
DisplayPort Cable
(Accessory)
AV Equipment
HDMI Cable
(Not Included)
ENGLISH
8 BEFORE YOU OPERATE THE MONITOR
Signal Timing
Change to the desired signal timing listed on page 21: COMPLIANT TIMING.
COMPUTER SETTING
For optimal viewing it is recommended to look at the full face
of the monitor.
Hold the stand so that the monitor does not topple when you
change the monitor’s angle.
You are able to adjust the monitor’s angle up to 12° upward,
4° downward.
In order to ensure a healthy and relaxed body position
when using the monitor at visual display workstations, it
is recommended that the adjusted tilt angle should not
exceed 10 degrees. Adjust the monitor’s angle to your own
preference.
ADJUSTING THE VIEWING ANGLE
NOTE Do not touch the LCD screen when you change
the angle. It may cause damage or break the LCD
screen.
Careful attention is required not to catch your
fi ngers or hands when you change the angle.
4° 12°
ENGLISH
OPERATING THE MONITOR 9
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 21. You are also able to adjust the picture by following the button operation
shown below.
Press the MENU Button to start the On Screen Display feature. There are additional
Menu items which can be switched by using the / Buttons.
Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Press the MENU Button. Then, use the / Buttons to highlight
the desired adjustment icon.
Press the MENU Button again. Use the / Buttons to make the appropriate
adjustment or setting.
Press the Button to leave the menu, and the settings you just made would be
automatically saved.
When button operations are aborted during adjustment, On-Screen Display disappears when
the time set for the OSD Timeout has passed. Also, the button can be used to return previous
menu and turn off the On-Screen Display.
Any changes are automatically saved in the memory when the On Screen Display
disappears.
Turning off the power should be avoided while using the Menu.
NOTE
For example, to correct for OSD vertical position, select Menu item of OSD Setup and then
press the MENU Button. Then, select V.Position by using the / Buttons.
An adjustment page appears after you press the MENU Button. Then, use the / Buttons
to change the OSD vertical position settings. The OSD vertical position of the overall display
should be changing accordingly while you are doing this.
Press the Button lastly, it ends, all changes are saved in the memory.
Luminance
Contrast
Brightness
i-Style Color
50
100
Standard
Overdrive Off
Adv. Contrast Off
OSD
Exit Move Select
OSD
OSD Setup
H. Position 95
V. Position
Timeout
Language
10
English
Exit Move Select
5
ENGLISH
10 OPERATING THE MONITOR
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option Button to Press
Luminance
Too dark
Too bright
Brightness *1
Contrast Too dull
Too intense
*1 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
bright. Brightness adjustment is disabled when Eco is activated.
*2 i-Style Color cannot be adjusted and selected while Blue Light Reducer is active.
*3 When Overdrive is activated, some level of image retention will be caused.
i-Style Color *2
Standard For general windows environment and monitor
default setting.
Text For text editing and viewing in a word processing
environment.
Internet For internet environment.
Game For PC game environment.
Movie For movie and video environment.
Sports For sport environment.
Adv. Contrast Increased Contrast Ratio
On
Off Typical Contrast Ratio
Adv. Contrast adjusts brightness according to the image, and improve the contrast ratio
during movie playing.
Contrast, Brightness, Color Temp., Eco, i-Style Color and Blue Light Reducer cannot be
adjusted and selected while Adv. Contrast is active.
NOTE
Overdrive *3
Off / -2 / -1 / 0 / +1 / +2
It will improve the gray level response time of the
LCD panel.
A higher level results in a faster response time.
Luminance
Contrast
Brightness
i-Style Color
50
100
Standard
Overdrive Off
Adv. Contrast Off
OSD
Exit Move Select
ENGLISH
OPERATING THE MONITOR 11
Adjustment Item Problem / Option Button to Press
Image Setup
Expansion displayWide
4:3 Displays all picture in 4:3 aspect ratio.
Aspect Ratio
5:4 Displays all picture in 5:4 aspect ratio.
Image Setup
Aspect Ratio Wide
OSD
Exit Move Select
ENGLISH
12 OPERATING THE MONITOR
Adjustment Item Problem / Option Button to Press
Color Temp. *
Yellowish white
Bluish white
Green
Red
Blue
Greenish white
Color Temp.
Normal
Warm
Cool
sRGB
sRGB
NOTE
sRGB is an international standard which defi nes and unifi es the diff erence of color
appearance between equipment.
You can not adjust the Contrast, Brightness, i-Style Color and Eco during sRGB
mode because those settings are locked.
Too weak
Too strong
User
* Color Temp. cannot be adjusted and selected while Blue Light Reducer is active.
Color Temp.
Color Temp.
Red
Green
Warm
43
Blue
44
50
OSD
Exit Move Select
ENGLISH
OPERATING THE MONITOR 13
Language
English
Deutsch
English
German
Français French
Japanese
Timeout You can set the OSD display duration time
between 5 and 100 seconds.
Adjustment Item Problem / Option Button to Press
OSD Setup
OSD
Polski Polish
Русский Russian
Nederlands Dutch
Portuguese
Italiano Italian
Español Spanish
Português
Čeština Czech
H. Position
V. Position
OSD is too left
OSD is too right
OSD is too low
OSD is too high
OSD
OSD Setup
H. Position 95
V. Position 5
Timeout
Language
10
English
Exit Move Select
ENGLISH
14 OPERATING THE MONITOR
Adjustment Item Problem / Option Button to Press
PIP Setting
PIP Setting
PIP Setting
Size
Off
Small
Position
Swap
Right-Up
OSD
Exit Move Select
Off PIP Setting is turned off .
PIP Setting Display the Sub screen in the main screen.
PIP *
Divide screen display in Left and Right.
PBP *
Size
Position
Swap
Small
Middle
Large
Right-Up
Left-Up
Right-Down
Left-Down
Reduce the size of the Sub screen.
Increase the size of the Sub screen.
Move the sub screen to the top right corner.
Move the sub screen to the top left corner.
Move the sub screen to the bottom right corner.
Move the sub screen to the bottom left corner.
Swap the Main/Sub or Right/Left screens when PiP or PbP
mode is active.
Normal size
* PiP = Picture In Picture
With this function, you can display two diff erent pictures.
Display Sub screen in Main screen.
PbP = Picture By Picture
With this function, you can display two diff erent pictures.
Display Left and Right screen is divided.
When there are two or more input signals, you can display PIP /
PBP.
ENGLISH
OPERATING THE MONITOR 15
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
Input Select: Press the button when the Menu is not displayed.
Direct
See your graphic card user guide for more information
about changing the resolution and refresh.
NOTE
Displays information regarding the current input signal coming from
the graphic card in your computer.
Information
Adjustment Item Problem / Option Button to Press
Extra
Reset Factory-preset data is restored.
No Return to Menu.
Yes
Input Select
Extra
Input Select
DDC/CI
Reset
Information
Resolution:
H. Frequency:
V. Frequency:
Off
1920<H> * 1080<V>
67KHz
60Hz
OSD
Exit Move Select
Direct
Select the Digital (HDMI1) input. HDMI1
Select the Digital (DisplayPort) input.
DP
DDC / CI Off DDC / CI is Off .
DDC /CI is On.On
Main Source
Select the Digital (HDMI1) input. HDMI1
Select the Digital (DisplayPort) input.
DP
Sub Source
Auto-Switch
Input
Off Auto-Switch Input is Off .
If there is no signal source at the
selected input signal, the input signal
with the signal source is automatically
selected.
On
Select the Digital (HDMI2) input. HDMI2
Select the Digital (HDMI2) input. HDMI2
ENGLISH
16 OPERATING THE MONITOR
OSD Key Lock:
Press and hold the Button for 2-3 seconds when the Menu is not displayed, it will lock/unlock the
OSD Key Lock function.
Adjustment Item Problem / Option Button to Press
Volume Too soft
Too loud
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
Direct
Audio Adjust: Press the Button when the Menu is not displayed.
Eco * : Press the Button when the Menu is not displayed.
Off : Normal
Mode1 : Brightness of back-light is reduced.
Mode2 : Brightness of back-light is reduced more than 1.
Mode3 : Brightness of back-light is reduced more than 2.
* Eco is disabled when i-Style Color, Adv. Contrast or Color Temp. sRGB is activated.
Blue Light Reducer * : Pressing and holding of the Button for 3 seconds when the Menu is not
displayed.
Off : Normal
Mode1 : Blue light is reduced.
Mode2 : Blue light is reduced more than Mode1.
Mode3 : Blue light is reduced more than Mode2.
* Blue Light Reducer is disabled when i-Style Color or Color Temp. sRGB is activated.
ENGLISH
OPERATING THE MONITOR 17
Even when using the power management mode, the monitor consumes electricity. Turn
off the Power Switch whenever the monitor is not in use, during the night and weekends,
to avoid unnecessary power consumption.
It is possible that the video signal from the computer may be on while the H or V sync
signal is missing. In this instance, the POWER MANAGEMENT feature may not work
properly.
NOTE
POWER MANAGEMENT FEATURE
Power Management Mode
When the H-sync signal / V-sync signal / H and V sync signals from the computer are off , the
monitor enters into Power Management Mode which reduces the power consumption to less
than 0.5W. The screen becomes dark, and the power indicator turns to orange. From Power
Management Mode, the image reappears in several seconds when either the keyboard or the
mouse are touched again.
The power management feature of this product complies with power saving requirement of VESA
DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor
when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer.
There is a power management step the monitor takes as described below. The power management
function, including any timer settings is confi gured by the operating system. Check your operating
system manual for information on how this can be confi gured.
0 0.5W 100%
POWER
CONSUMPTION
Blue
Orange
Power Indicator
NORMAL MODE
POWER MANAGEMENT MODE
ENGLISH
18 TROUBLE SHOOTING
TROUBLE SHOOTING
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem
you have. If the monitor does not get a picture, skip to 2.
2. Consult the following items if you cannot fi nd an appropriate adjustment item in OPERATING THE
MONITOR or if the problem persists.
3. If you are experiencing a problem which is not described below or you cannot correct the
problem, discontinue using the monitor and contact your dealer or iiyama service center for further
assistance.
Problem Check
(Power indicator
is orange.)
The screen is not
synchronized.
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
(Power indicator
is blue.)
The picture does
not appear.
(Power indicator
does not light up.)
The screen
position is not in
the center.
The screen is too
bright or too dark.
The Power Cable is fi rmly seated in the socket.
The Power Switch is turned ON.
The AC socket is live. Please check with another piece of equipment.
If the blank screen saver is in active mode, touch the keyboard or the
mouse.
Increase the Contrast and/or Brightness.
The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.
If the monitor is in power management mode, touch the keyboard or the
mouse.
The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.
The video output level of the computer is within the specifi cation of the
monitor.
The signal timing of the computer is within the specifi cation of the monitor.
The video output level of the computer is within the specifi cation of the
monitor.
ENGLISH
TROUBLE SHOOTING / RECYCLING INFORMATION 19
The screen is
shaking.
The power voltage is within the specifi cation of the monitor.
The signal timing of the computer is within the specifi cation of the monitor.
The audio equipment (computer etc.) is ON.
The Volume is turned up.
The Mute is OFF.
The audio output level of the audio equipment is within the specifi cation of
the monitor.
The audio output level of the audio equipment is within the specifi cation of
the monitor.
Problem Check
No sound.
For better environment protection please don't dispose your monitor.
Please visit our web site: www.iiyama.com/recycle for monitor recycling.
RECYCLING INFORMATION
The sound is too
loud or too quiet.
ENGLISH
20 APPENDIX
APPENDIX
Design and specifi cations are subject to change without prior notice.
SPECIFICATIONS
Size Category 32"
LCD
Panel
Panel technology
VA
Size Diagonal: 31.5" (80cm)
Pixel pitch 0.181mm H × 0.181mm V
Brightness 300cd/m2 (Typical)
Contrast ratio 3000 : 1 (Typical), Adv. Contrast Function Available
Viewable angle
Right / Left : 89 degrees each, Up / Down : 89 degrees each (Typical)
Response time 3ms (Gray to Gray)
Display Colors Approx. 1.07 Billion
Sync Frequency HDMI: Horizontal: 30.0-135.0kHz, Vertical: 24-75Hz
DisplayPort: Horizontal: 30.0-135.0kHz, Vertical: 24-75Hz
Native Resolution 3840 × 2160, 8.2 MegaPixels
Support max. resolution HDMI: 3840 × 2160 60Hz
DisplayPort: 3840 × 2160 60Hz
Input Connector HDMI x 2, DisplayPort
Plug & Play VESA DDC2BTM
Input Video Signal Digital: HDMI, DisplayPort
Headphone Connector ø 3.5mm mini jack (Stereo)
Speakers 2W × 2 (Stereo speakers)
Maximum Screen Size 695.04mm W × 390.96mm H / 27.4" W × 15.4" H
Power Source 100-240VAC, 50/60Hz, 1.5A
Power Consumption 52W typical, Power management mode: 0.5W maximum
Energy Effi ciency Class: B
Dimensions / Net Weight
729.5 × 546.0 × 254.0mm / 28.7 × 21.5 × 10.0" (W×H×D)*
6.8kg / 15.0lbs
Tilt Angle Upward: 12 degrees, Downward: 4 degrees
Environmental
Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
5 to 35°C / 41 to 95°F
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
Approvals CE, TÜV-Bauart, CU, VCCI-B, PSE
* Protruding portion(s) not included.
ENGLISH
APPENDIX 21
DIMENSIONS
729.5mm/28.7”
254.0mm/10.0”
457.5mm/18.0”
700.5mm/27.6”
395.0mm/15.6”
433.0mm/17.0”
546.0mm/21.5”
64.5mm/2.5”
COMPLIANT TIMING
M197A21
* Recommended to use on PbP mode.
NOTE
Video Mode Horizontal
Frequency Vertical
Frequency Dot Clock
VESA
VGA 640 × 480 31.469kHz 59.940Hz 25.175MHz
37.500kHz 75.000Hz 31.500MHz
SVGA 800 × 600 37.879kHz 60.317Hz 40.000MHz
46.875kHz 75.000Hz 49.500MHz
XGA 1024 × 768 48.363kHz 60.004Hz 65.000MHz
60.023kHz 75.029Hz 78.750MHz
SXGA 1280 × 1024 63.981kHz 60.020Hz 108.000MHz
79.976kHz 75.025Hz 135.000MHz
WSXGA+ 1680 × 1050 65.290kHz 60.000Hz 146.250MHz
Full HD 1920 × 1080 66.590kHz 59.930Hz 138.500MHz
QHD 2560 × 1440 88.787kHz 59.951Hz 241.500MHz
UHD 3840 × 2160 67.430kHz 29.970Hz 296.700MHz
133.313kHz 59.997Hz 533.250MHz
1920 × 2160 133.293kHz 59.988Hz 277.250MHz *