iiyama XU2493HS-B1 User Manual
Displayed below is the user manual for XU2493HS-B1 by iiyama which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
ENGLISH
USER MANUAL
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes
to read this comprehensive manual carefully
before installing and switching on the monitor.
Please keep this manual in a safe place for
your future reference.
ENGLISH
ENGLISH
Wereservetherighttochangespecicationswithoutnotice.
All trademarks used in this user manual are the property of their respective owners.
As an ENERGY STAR® Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines
forenergyeciency.
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the address:
http://www.iiyama.com
YoucanaccesstheWebpageofdierentcountriesfromthere.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC
Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU
“RoHS Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in
residential areas, business and light industrial premises and small-scale enterprises, inside as
well as outside of the buildings. All places of operation are characterised by their connection to
the public low voltage power supply system.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PL2493H
ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................ 1
SAFETY PRECAUTIONS................................................................1
SPECIAL NOTES ON LCD MONITORS .........................................3
CUSTOMER SERVICE ...................................................................3
CLEANING ......................................................................................3
BEFORE YOU OPERATE THE MONITOR ..........................................4
FEATURES......................................................................................4
CHECKING THE CONTENTS OF THE PACKAGE ........................4
WALL MOUNTING ..........................................................................5
FITTING AND REMOVAL OF BASE : ProLite XUB2493HS ...........6
FITTING AND REMOVAL OF BASE : ProLite XU2493HS .............. 7
CONTROLS AND CONNECTORS : ProLite XUB2493HS .............. 8
CONTROLS AND CONNECTORS : ProLite XU2493HS ................9
CONNECTING YOUR MONITOR : ProLite XUB2493HS .............10
CONNECTING YOUR MONITOR : ProLite XU2493HS ................ 11
COMPUTER SETTING .................................................................11
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE :
ProLite XUB2493HS ...................................................................... 12
PANEL ROTATION : ProLite XUB2493HS ....................................12
ADJUSTING THE VIEWING ANGLE : ProLite XU2493HS ........... 13
OPERATING THE MONITOR .............................................................14
ADJUSTMENT MENU CONTENTS ..............................................15
SCREEN ADJUSTMENTS ............................................................22
POWER MANAGEMENT FEATURE .............................................25
TROUBLE SHOOTING ......................................................................26
RECYCLING INFORMATION .............................................................27
APPENDIX ........................................................................................28
SPECIFICATIONS : ProLite XUB2493HS ..................................... 28
SPECIFICATIONS : ProLite XU2493HS .......................................29
DIMENSIONS : ProLite XUB2493HS ............................................ 30
DIMENSIONS : ProLite XU2493HS ..............................................30
COMPLIANT TIMING ....................................................................31
ENGLISH
FOR YOUR SAFETY 1
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the
monitor and contact your dealer or iiyama service center immediately. Further use may be
dangerousandcancausereorelectricshock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
reorelectricshock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
anyobjectinsidemaycausere,electricshockordamage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Donotusewherewatermaybesplashedorspiltontothemonitorasitmaycausereor electric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Besuretooperatethemonitoronlywiththespeciedpowersupply.Useofanincorrectvoltagewill
causemalfunctionandmaycausereorelectricshock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objectsonthecables.Ifdamaged,thecablesmaycausereorelectricshock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS
ENGLISH
2 FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or
smokyareasasitmaycausere,electricshockordamage.Youshouldalsoavoidareaswherethe
sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not
pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
re.Toallowadequateaircirculation,placethemonitoratleast10cm(or4inches)fromanywalls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the
cabinetwillbeblockedandthemonitormayoverheatifthestandisremoved.Thismaycausere
or damage. Operating the monitor on its back, side, upside down or on a carpet or any other soft
material may also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
Whenyoumovethemonitor,turnothepower switch,unplugthemonitorandbesurethesignal
cableisdisconnected.Ifyoudonotdisconnectthem,itmaycausereorelectricshock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable
itselfasthismaycausereorelectricshock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may
damage your computer.
CAREFUL! PROTECT YOUR HANDS AND FINGERS
Becarefulnottohurtyourngersorhandswhenyouchangetheheightortheangle.
Injurycanoccurifcareisnottakentoavoidngercontactwiththedisplaysbasewhenadjusting
theheight.(Justforheightadjustablemodel.)
REMARK FOR 24/7 USAGE
Thisproductisnotspecicallydesignedfor24/7usageinallenvironments.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
Foroptimalviewingcomfort,themonitorshouldbejustbeloweyeleveland40-60cm(16-24inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
ENGLISH
FOR YOUR SAFETY 3
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE
When you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture position to
the correct position.
You may find slightly uneven brightness on the screen depending on the desktop
pattern you use.
Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screencanberecoveredslowlybychangingtheimageorturningothePowerSwitch
for some hours.
SPECIAL NOTES ON LCD MONITORS
NOTE
If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
WARNING
If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.
CAUTION
For safety reasons, turn o the power switch and unplug the monitor before you
clean it.
NOTE
To protect the LCD panel, do not scratch or rub the screen with a hard object.
Never use any of the following strong solvents. These will damage the cabinet and
the LCD screen.
Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
Thinner
Benzine
Abrasive cleaner
Spray-type cleaner
Wax
Acid or Alkaline solvent
CABINET Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
LCD
SCREEN
Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
CUSTOMER SERVICE
CLEANING
ENGLISH
4 BEFORE YOU OPERATE THE MONITOR
The following accessories are included in your package. Check to see if they are enclosed with
the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional
iiyamaoce.
*1 The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used. However, all guarantees and warranties are void for any
problems or damage caused by a power cable not supplied by iiyama.
An approved power cord greater or equal to H05VVF, 3G, 0.75mm² must be used.
*2 Accessory for ProLite XU2493HS.
*3 Accessory for ProLite XUB2493HS.
Power Cable*1
HDMI Cable Stand-Base
Stand*2 Screwforstandxing(3pcs)*3
Safety Guide Quick Start Guide
BEFORE YOU OPERATE THE MONITOR
CHECKING THE CONTENTS OF THE PACKAGE
CAUTION
FEATURES
Supports Resolutions up to 1920 × 1080
High Contrast 1000:1 (Typical), Adv. Contrast Function Available / Brightness
250cd/m2 (Typical)
Quick Response Time 4ms (Gray to Gray)
Blue Light Reducer
Digital Character Smoothing
Automatic Set-up
2 × 2W Stereo Speakers
Plug & Play VESA DDC2B Compliant
Windows® 7/8.1/10 Compliant
Power Management (ENERGY STAR® and VESA DPMS Compliant)
VESA Mounting Standard (100mm×100mm) Compliant
Keyhole for Security Lock
ENGLISH
BEFORE YOU OPERATE THE MONITOR 5
When you use with the wall mounting, in consideration of thickness of the mounting
stage, tighten the M4 Screw with washer which “L” length is 7mm to fasten the
monitor. Using the screw longer than this may cause electric shock or damage
because it may contact with the electrical parts inside the monitor.
Please check if the wall or ceiling can support the weight of the monitor before
mounting it.
WALL MOUNTING
WARNING
Screw
Chassis
Mounting Stage
L
ENGLISH
6 BEFORE YOU OPERATE THE MONITOR
FITTING AND REMOVAL OF BASE : ProLite XUB2493HS
CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid electric shock or damage.
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Laythemonitoratonatablewithfrontfacedown.
Remove the ‘thumb screw’ to remove the base from the monitor.
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Laythemonitoratonatablewithfrontfacedown.
Hold the monitor and install the Stand-Base.
Use the ‘thumb screw’ provided to secure the base to the monitor.
ThumbscrewforStand-Basexing
Stand-Base
<Stopper>
Put the monitor on a at surface. Press the stopper at
the back of the stand while pushing the monitor from the
top. Careful attention is required as the monitor is sprung
loaded and the stand may expand quickly.
Stopper
ENGLISH
BEFORE YOU OPERATE THE MONITOR 7
FITTING AND REMOVAL OF BASE : ProLite XU2493HS
CAUTION Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid electric shock or damage.
<Removal>
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitoratonatablewithfrontfacedown.
Keep pressing the hooks inward to pull out the
Stand-Base.
Press the hook on the back of the monitor and
remove the Stand from the monitor.
<Installation>
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitoratonatablewithfrontfacedown.
Hold the monitor and install the Stand to the monitor
until it clicks to secure.
Install the Stand-Base to the stand.
Stand
Stand-Base
Hooks
Hook
ENGLISH
8 BEFORE YOU OPERATE THE MONITOR
Power Indicator
Blue: Normal operation
Orange: Power Management
AutoAdjust/SignalSelect/ExitButton(AUTO)*
+/EcoButton(+)*
-/Volume/BlueLightReducerButton(-)*
MenuButton(MENU)
PowerSwitch()
Speakers
Headphone Connector
( )
Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
AudioConnector( )
VGAConnector(D-SUB)
HDMIConnector(HDMI)
DisplayPort
Connector(DP)
Cable Hole
ACConnector( :Alternatingcurrent)( )
* You can skip the Menu items and display an option selection screen or an adjustment scale directly.
NOTE
NOTE
CONTROLS AND CONNECTORS : ProLite XUB2493HS
<Front> <Back>
ENGLISH
BEFORE YOU OPERATE THE MONITOR 9
CONTROLS AND CONNECTORS : ProLite XU2493HS
<Front> <Back>
Power Indicator
Blue: Normal operation
Orange: Power Management
AutoAdjust/SignalSelect/ExitButton(AUTO)*
+/EcoButton(+)*
-/Volume/BlueLightReducerButton(-)*
MenuButton(MENU)
PowerSwitch()
Speakers
Headphone Connector
( )
Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
AudioConnector( )
VGAConnector(D-SUB)
HDMIConnector(HDMI)
DisplayPort
Connector(DP)
ACConnector( :Alternatingcurrent)( )
* You can skip the Menu items and display an option selection screen or an adjustment scale directly.
NOTE
NOTE
ENGLISH
10 BEFORE YOU OPERATE THE MONITOR
CONNECTING YOUR MONITOR : ProLite XUB2493HS
Ensurethatboththecomputerandthemonitorareswitchedo.
Connect the computer to the monitor with the signal cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
ConnectthePowerCabletothemonitorrstandthentothepowersource.
Turn on your monitor and computer.
[Example of Connection]
<Back>
NOTE The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regionaliiyamaoce.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyamaoceforasuitableadaptor.
Makesureyoutightenthengerscrewsateachendofthesignalcable.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.
[ Collect Cables ]
Put the cables through the cable hole.
Collect the cables at the back of the stand.
* VGA cable is not supplied with the monitor. If you use low quality VGA cable, it may cause a result
of electro-magnetic interference. Please contact the iiyama Support Centre in your country if you
wish to connect the monitor via the VGA input.
Power Cable (Accessory)
Computer
AV Equipment
Audio Cable (Not Included)
VGA Cable (Not Included)*
DisplayPort Cable (Not Included)
HDMI Cable (Accessory)
ENGLISH
BEFORE YOU OPERATE THE MONITOR 11
CONNECTING YOUR MONITOR : ProLite XU2493HS
Ensurethatboththecomputerandthemonitorareswitchedo.
Connect the computer to the monitor with the signal cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
ConnectthePowerCabletothemonitorrstandthentothepowersource.
Turn on your monitor and computer.
[Example of Connection]
<Back>
NOTE The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regionaliiyamaoce.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyamaoceforasuitableadaptor.
Makesureyoutightenthengerscrewsateachendofthesignalcable.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.
* VGA cable is not supplied with the monitor. If you use low quality VGA cable, it may cause a result
of electro-magnetic interference. Please contact the iiyama Support Centre in your country if you
wish to connect the monitor via the VGA input.
Computer
AV Equipment
Audio Cable (Not Included)
VGA Cable (Not Included)*
DisplayPort Cable (Not Included)
HDMI Cable (Accessory)
Power Cable (Accessory)
Signal Timing
Change to the desired signal timing listed on page 31: COMPLIANT TIMING.
COMPUTER SETTING
ENGLISH
12 BEFORE YOU OPERATE THE MONITOR
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE :
ProLite XUB2493HS
For optimal viewing it is recommended to
position yourself directly opposite to the full face
of the monitor, then adjust the monitor’s height
and angle to your own preference.
Hold the panel so that the monitor does not topple
when you change the monitor’s height or angle.
You are able to adjust the monitor's height up to
130mm, angle up to 45 degrees right and left, 22
degrees upward and 5 degrees downward.
Do not touch the LCD screen when you
change the height or the angle. It
may cause damage or break the LCD
screen.
Careful attention is required not to
catch your fingers or hands when you
change the height or the angle.
Injury can occur if care is not taken to
avoidngercontactwiththedisplays
base when adjusting the height.
NOTE
PANEL ROTATION : ProLite XUB2493HS
Adjust the monitor’s height.
Rotate the panel 90 degrees.
Portrait: Turn clockwise.
Landscape: Turn counter clockwise.
Attempting to rotate without fully extending
upward may cause damage to stand.
Video card for portrait display will be
required for rotating the image on the
screen.
Adjust the monitor’s angle to your preference.
NOTE
Monitor
Stand
90°
45° 45°
130m
m
5° 22°
ENGLISH
BEFORE YOU OPERATE THE MONITOR 13
For optimal viewing it is recommended to look at the full face
of the monitor.
Hold the stand so that the monitor does not topple when you
change the monitor’s angle.
You are able to adjust the monitor’s angle up to 21.5° upward,
3.5° downward.
In order to ensure a healthy and relaxed body position
when using the monitor at visual display workstations, it
is recommended that the adjusted tilt angle should not
exceed 10 degrees. Adjust the monitor’s angle to your own
preference.
ADJUSTING THE VIEWING ANGLE : ProLite XU2493HS
NOTE Do not touch the LCD screen when you change
the angle. It may cause damage or break the LCD
screen.
Careful attention is required not to catch your
ngersorhandswhenyouchangetheangle.
3.5° 21.5°
ENGLISH
14 OPERATING THE MONITOR
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 31. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 22 for SCREEN ADJUSTMENTS.
Press the MENU Button to start the On Screen Display feature. There are additional
Menu items which can be switched by using the + / - Buttons.
Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Press the MENU Button. Then, use the + / - Buttons to highlight
the desired adjustment icon.
Press the MENU Button again. Use the + / - Buttons to make the appropriate
adjustment or setting.
Press the AUTO Button to leave the menu, and the settings you just made would be
automatically saved.
When button operations are aborted during adjustment, On-Screen Display disappears when the
time set for the OSD Timeout has passed. Also, the AUTO button can be used to return previous
menuandturnotheOn-ScreenDisplay.
Any changes are automatically saved in the memory when the On Screen Display
disappears.
TurningothepowershouldbeavoidedwhileusingtheMenu.
Adjustments for Pixel Clock, Phase and Horizontal / Vertical Position are saved for each signal
timing. Except for these adjustments, all other adjustments have only one setting which applies to
all signal timings.
NOTE
For example, to correct for vertical position, select Menu item of Image Settings and then press
the MENU Button. Then, select Vertical Position by using the + / - Buttons.
An adjustment page appears after you press the MENU Button. Then, use the + / - Buttons
to change the vertical position settings. The vertical position of the overall display should be
changing accordingly while you are doing this.
Press the AUTO Button lastly, it ends, all changes are saved in the memory.
LUMINANCE
IMAGE SETTINGS
COLOR SETTINGS
OSD
EXTRA
IMAGE SETTINGS
PIXEL CLOCK
PHASE
HORIZONTAL POSITION
VERTICAL POSITION
ASPECT RATIO FULL
ProLite XUB2493HS
ENGLISH
OPERATING THE MONITOR 15
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option Button to Press
Luminance
Too dark
Too bright
Brightness *1
Contrast Too dull
Too intense
*1 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
bright.
*2 i-Style Color and Adv. Contrast are disabled when Blue Light Reducer is activated.
LUMINANCE
IMAGE SETTINGS
COLOR SETTINGS
OSD
EXTRA
CONTRAST
BRIGHTNESS
I-STYLE COLOR STANDARD
ON OFF
OFF
ADV. CONTRAST
ECO
ProLite XUB2493HS
Mode1 Brightness of back-light is reduced.
Mode2 Brightness of back-light is reduced more than Mode1.
O Normal
Eco
Mode3 Brightness of back-light is reduced more than Mode2.
i-Style Color *2
Standard For general windows environment and monitor
default setting.
Text For text editing and viewing in a word processing
environment.
Internet For internet environment.
Game For PC game environment.
Movie For movie and video environment.
Sports For sport environment.
Adv. Contrast *2Increased Contrast Ratio
On
O Typical Contrast Ratio
Adv. Contrast adjusts brightness according to the image, and improve the contrast ratio
during movie playing.
Contrast, Brightness, i-Style Color, Eco, Gamma and Color Temp. cannot be adjusted
and selected while Adv. Contrast is active.
NOTE
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
Eco: Press the + Button when the Menu is not displayed.
Direct
Direct
ENGLISH
16 OPERATING THE MONITOR
Adjustment Item Problem / Option Button to Press
Image Settings
Phase *1,2
Pixel Clock *1,2
Too left
Too right
Too low
Too high
Horizontal Position *2
Vertical Position *2
Too narrow
Too wide
Tocorrectickeringtextorlines
LUMINANCE
IMAGE SETTINGS
COLOR SETTINGS
OSD
EXTRA
IMAGE SETTINGS
PIXEL CLOCK
PHASE
HORIZONTAL POSITION
VERTICAL POSITION
ASPECT RATIO FULL
ProLite XUB2493HS
*1 See page 22 for SCREEN ADJUSTMENTS.
*2 Only Analog Input.
Expansion displayFull
Aspect Expansion display of Aspect
Aspect Ratio
ENGLISH
OPERATING THE MONITOR 17
Adjustment Item Problem / Option Button to Press
Color Settings *
Yellowish white
Bluish white
Green
Red
Blue
Greenish white
NormalGamma1
Gamma2 Dark
High contrast
Gamma3
LUMINANCE
IMAGE SETTINGS
COLOR SETTINGS
OSD
EXTRA
COLOR SETTINGS
USER PRESET
GAMMA
COLOR TEMP.
GAMMA1
USER
RED
GREEN
BLUE
ProLite XUB2493HS
6-AXIS HUE
Gamma
Color Temp.
Normal
Warm
Cool
sRGB
sRGB
NOTE
sRGB is an international standard which denes and unies the dierence of color
appearance between equipment.
You can not adjust the Contrast, Brightness, i-Style Color, Adv. Contrast, Eco, Gamma
and Blue Light Reducer during sRGB mode because those settings are locked.
Too weak
Too strong
User
* Color Settings are disabled when Blue Light Reducer is activated.
6-Axis
Hue
Saturation
Red
Yellow
Green
Cyan
Blue
Magenta
Red
Yellow
Green
Cyan
Blue
Magenta
Too weak
Too strong
Too weak
Too strong
ENGLISH
18 OPERATING THE MONITOR
Language
OSD Time
OSD Horizontal Position OSD is too left
OSD is too right
OSD is too low
OSD is too high
You can set the OSD display duration time
between 5 and 100 seconds.
Adjustment Item Problem / Option Button to Press
OSD
OSD Vertical Position
LUMINANCE
IMAGE SETTINGS
COLOR SETTINGS
OSD
EXTRA
ON SCREEN DISPLAY SETTINGS
OSD HORIZONTAL POSITION
OSD VERTICAL POSITION
OSD TIME
LANGUAGE ENGLISH
ProLite XUB2493HS
English
Deutsch
English
German
Français French
Japanese
Portuguese
Italiano Italian Russian
Español Spanish
Portuguese
Polski Polish
Nederlands Dutch
ENGLISH
OPERATING THE MONITOR 19
Adjustment Item Problem / Option Button to Press
Extra
Reset Factory-preset data is restored.
No Return to Menu.
Yes
Signal Select
At selected the AUTO, it will automatically be selected when just one source is available.
If there are more input sources available and you select one of them, the AUTO option is
not available.
If multiple inputs are connected, the monitor may not recover the last one used after
turningitoandonagain.
Itisonlypossiblewhenyousetaspecicsource.
NOTE
Select the Analog input.
SelecttheDigital(HDMI)input.
VGA
HDMI
LUMINANCE
IMAGE SETTINGS
COLOR SETTINGS
OSD
EXTRA
EXTRA
RESET
DDC/CI
SIGNAL SELECT
OVERDRIVE
AUDIO SOURCE
OPENING LOGO
LED
YES NO
HDMI
ON OFF
OFF
LINE IN
ON OFF
ProLite XUB2493HS
INFORMATION
OFF
ON
Auto Select the signal input automatically.
Direct
SelecttheDigital(DisplayPort)input.
DP
Select the HDMI input.
LINE IN Select the LINE IN input.
HDMI
Audio Source *2
*1 When OverDrive is activated, some level of image retention will be caused.
*2 Suitable for HDMI/DisplayPort input only.
OverDrive *1
O/-2/-1/0/+1/+2
It will improve the gray level response time of the
LCD panel.
A higher level results in a faster response time.
DDC / CI O DDC/CIisO.
DDC/CI is On.On
SIGNAL SELECT
AUTO VGA HDMI DP
Select the DisplayPort input.DP
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
Signal Select: Press the AUTO button when the Menu is not displayed, it shows following Menu.
Press the AUTO button again to select input source and then press the MENU button.
Direct
ENGLISH
20 OPERATING THE MONITOR
See your graphic card user guide for more information
about changing the resolution and refresh.
NOTE
Displays information regarding the current input signal coming
from the graphic card in your computer.
Information
Adjustment Item Problem / Option Button to Press
Extra
LUMINANCE
IMAGE SETTINGS
COLOR SETTINGS
OSD
EXTRA
EXTRA
RESET
DDC/CI
SIGNAL SELECT
OVERDRIVE
AUDIO SOURCE
OPENING LOGO
LED
YES NO
HDMI
ON OFF
OFF
LINE IN
ON OFF
ProLite XUB2493HS
INFORMATION
OFF
ON
Opening Logo O OpeningLogoisO.
Opening Logo is On.On
TurnOthePower Indicator when you are bothered by the light.
NOTE
LED O ThePowerIndicatoristurnedO.
The Power Indicator is turned On.On
ENGLISH
OPERATING THE MONITOR 21
Adjustment Item Problem / Option Button to Press
Volume Too soft
Too loud
Adjustment Item Problem / Option Button to Press
Auto Adjust *
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
Direct
Adjust Pixel Clock, Phase and Horizontal / Vertical Position
automatically.
* For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 22 for
SCREEN ADJUSTMENTS.
Only Analog Input
Auto Adjust: Press and hold the AUTO Button for 3-4 seconds when the Menu is not displayed.
Volume: Press the - Button when the Menu is not displayed.
Lock Mode:
<OSD>
HoldtheMENUbuttonandturnonthemonitorwhenthemonitorispower-o,itwilllock/unlockthe
OSD Key Lock function.
<Power/OSD>
Pressing and holding the MENU button for 10 seconds when Menu is not displayed, will lock/unlock
the Power/OSD Key Lock function.
Blue Light Reducer * : Pressing and holding of the - Button for 3-4 seconds when the Menu
is not displayed.
O:Normal
Mode1 : Blue light is reduced.
Mode2 : Blue light is reduced more than Mode1.
Mode3 : Blue light is reduced more than Mode2.
* Blue Light Reducer cannot be enabled if i-Style Color, Adv. Contrast or sRGB is enabled.
ENGLISH
22 OPERATING THE MONITOR
SCREEN ADJUSTMENTS
The screen adjustments described in this manual are designed to set image position and minimize
ickerorblurfortheparticularcomputerinuse.
The monitor is designed to provide the best performance at resolution of 1920 × 1080, but can not
provide the best at resolutions of less than 1920 × 1080 because the picture is automatically stretched
totthefullscreen.Itisrecommendedtooperateatresolutionof1920×1080innormaluse.
Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to
the screen enlargement process.
It is preferable to adjust the image position and frequency with the monitor controls, rather than
the computer software or utilities.
Perform adjustments after a warm-up period of at least thirty minutes.
Additional adjustments may be required after the Auto Adjust depending on the resolution or
signal timing.
The Auto Adjust may not work correctly when displaying the picture other than the screen
adjustment pattern. In this case, manual adjustments are required.
There are two ways to adjust the screen. One way is automatic adjustment for Position, Pixel Clock
and Phase. The other way is performing each adjustment manually.
Perform theAutoAdjust rst when the monitor is connected to a new computer, or resolution is
changed. If the screen has a flicker or blur, or the picture does not fit in the display area after
performing the Auto Adjust, manual adjustments are required. Both adjustments should be made by
usingthescreenadjustmentpattern(Test.bmp)obtainedviatheIIYAMAwebsite(http://www.iiyama.
com).
Adjust the image by following the procedure below to get the desired picture.
This manual explains adjustment under Windows® OS.
Display the picture at the optimum resolution.
Enter the Test.bmp (screen adjustment pattern) to wallpaper.
Consult the appropriate documentation for doing this.
Set the display position to center in the wallpaper setting dialogue box.
[Adjustment pattern]
Zebra pattern
Color bar
Picture frame
NOTE
Adjust the image by following the procedure below to get the desired picture when selecting Analog input.
ENGLISH
OPERATING THE MONITOR 23
1) Adjust the Horizontal Position so that the left side of the picture frame will move to the
left edge of the display area.
When the left side of the picture frame moves apart from the left edge of the display
areaduringthePixelClockadjustment,adjuststeps1)and2).
Another way to make the Pixel Clock adjustment is to correct the vertical wavy lines
in the zebra pattern.
The picture may flicker during the Pixel Clock and Horizontal / Vertical Position
adjustments.
In case the picture frame is bigger or smaller than the data display area after the
Pixel Clock adjustment, repeat steps from .
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the Pixel Clock.
Pressing and holding of the AUTO Button for 3-4 seconds when the Menu is not
displayed. (Auto Adjust)
Adjust the image manually by following procedure below when the screen has a icker or
blur, or the picture does not t in the display area after performing the Auto Adjust.
Adjust the Vertical Position so that the top and bottom of the picture frame will t to the
display area.
NOTE
ENGLISH
24 OPERATING THE MONITOR
Adjust the Brightness and Color to get the desired picture after you complete the Pixel
Clock and Phase adjustments.
Put back your favorite wallpaper.
Adjust the Phase to correct horizontal wavy noise, icker or blur in the zebra pattern.
NOTE Incasethestrongickerorblursremainonapartofthescreen,repeatsteps and
because the Pixel Clock may not be adjusted correctly.
Adjust the Horizontal Position after the Phase adjustment if the horizontal position
moves during the adjustment.
ENGLISH
OPERATING THE MONITOR 25
Even when using the power management mode, the monitor consumes electricity. Turn
othePowerSwitchwheneverthemonitorisnotinuse,duringthenightandweekends,
to avoid unnecessary power consumption.
It is possible that the video signal from the computer may be on while the H or V sync
signal is missing. In this instance, the POWER MANAGEMENT feature may not work
properly.
NOTE
POWER MANAGEMENT FEATURE
Power Management Mode
When the H-sync signal / V-sync signal / H and V sync signals from the computer are o, the
monitor enters into Power Management Mode which reduces the power consumption to less
than 0.5W. The screen becomes dark, and the power indicator turns to orange. From Power
Management Mode, the image reappears in several seconds when either the keyboard or the
mouse are touched again.
The power management feature of this product complies with power saving requirement of ENERGY
STAR® and VESA DPMS. When activated, it automatically reduces unnecessary power consumption
of the monitor when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer.
There is a power management step the monitor takes as described below. The power management
function,includingany timersettingsis conguredbytheoperating system.Checkyour operating
systemmanualforinformationonhowthiscanbecongured.
0 0.5W 100%
POWER
CONSUMPTION
Blue
Orange
Power Indicator
NORMAL MODE
POWER MANAGEMENT MODE
ENGLISH
26 TROUBLE SHOOTING
TROUBLE SHOOTING
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem
you have. If the monitor does not get a picture, skip to 2.
2.ConsultthefollowingitemsifyoucannotndanappropriateadjustmentiteminOPERATINGTHE
MONITOR or if the problem persists.
3. If you are experiencing a problem which is not described below or you cannot correct the
problem, discontinue using the monitor and contact your dealer or iiyama service center for further
assistance.
Problem Check
(Powerindicator
isorange.)
The screen is not
synchronized.
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
(Powerindicator
isblue.)
The picture does
not appear.
(Powerindicator
doesnotlightup.)
The screen
position is not in
the center.
The screen is too
bright or too dark.
ThePowerCableisrmlyseatedinthesocket.
The Power Switch is turned ON.
The AC socket is live. Please check with another piece of equipment.
If the blank screen saver is in active mode, touch the keyboard or the
mouse.
Increase the Contrast and/or Brightness.
The computer is ON.
The Signal Cable is properly connected.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
If the monitor is in power management mode, touch the keyboard or the
mouse.
The computer is ON.
The Signal Cable is properly connected.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
The Signal Cable is properly connected.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
The video output level of the computer is within the specication of the
monitor.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
The video output level of the computer is within the specication of the
monitor.
ENGLISH
TROUBLE SHOOTING / RECYCLING INFORMATION 27
The screen is
shaking.
Thepowervoltageiswithinthespecicationofthemonitor.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
Theaudioequipment(computeretc.)isON.
The Audio Cable is properly connected.
The Volume is turned up.
The Mute is OFF.
Theaudiooutputleveloftheaudioequipmentiswithinthespecicationof
the monitor.
Theaudiooutputleveloftheaudioequipmentiswithinthespecicationof
the monitor.
The Audio Cable is properly connected.
Problem Check
No sound.
For better environment protection please don't dispose your monitor.
Please visit our web site: www.iiyama.com/recycle for monitor recycling.
RECYCLING INFORMATION
The sound is too
loud or too quiet.
A strange noise is
heard.
ENGLISH
28 APPENDIX
APPENDIX
Designandspecicationsaresubjecttochangewithoutpriornotice.
SPECIFICATIONS : ProLite XUB2493HS
* Audio equipment is not connected.
NOTE
Size Category 24"
LCD
Panel
Panel technology
IPS Panel Technology
Size Diagonal:23.8"(60.47cm)
Pixel pitch 0.275mm H × 0.275mm V
Brightness 250cd/m2(Typical)
Contrast ratio 1000:1(Typical),Adv.ContrastFunctionAvailable
Viewable angle
Right/Left:89degreeseach,Up/Down:89degreeseach(Typical)
Response time 4ms(GraytoGray)
Display Colors Approx. 16.7M
Sync Frequency Horizontal: 30.0-80.0kHz, Vertical: 55-75Hz
Native Resolution 1920 × 1080, 2.1 MegaPixels
Support max. resolution VGA: 1920 × 1080 60Hz
HDMI: 1920 × 1080 60Hz
DisplayPort: 1920 × 1080 60Hz
Input Connector VGA, HDMI, DisplayPort
Plug & Play VESA DDC2BTM
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal Analog:0.7Vp-p(Standard),75Ω, Positive
Digital: HDMI, DisplayPort
Input Audio Connector ø3.5mmminijack(Stereo)
Input Audio Signal 1.0Vrms maximum
Headphone Connector ø3.5mmminijack(Stereo)
Speakers 2W×2(Stereospeakers)
Maximum Screen Size 527.04mm W × 296.46mm H / 20.7" W × 11.7" H
Power Source 100-240VAC, 50/60Hz, 1.5A
Power Consumption * 19W typical, Power management mode: 0.5W maximum
EnergyEciencyClass:A+
Dimensions / Net Weight
540.5×378.0-508.0×230.0mm/21.3×14.9-20.0×9.1"(W×H×D),
5.5kg / 12.12lbs
Tilt Angle
Upward: 22 degrees Downward: 5 degrees, Left/Right: 45 degrees each
Environmental
Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
5 to 35°C / 41 to 95°F
10to80%(Nocondensation)
-20 to 60°C / -4 to 140°F
5to85%(Nocondensation)
Approvals CE, TÜV-Bauart, VCCI-B, PSE, CU
, ENERGY STAR
®
ENGLISH
APPENDIX 29
SPECIFICATIONS : ProLite XU2493HS
* Audio equipment is not connected.
NOTE
Size Category 24"
LCD
Panel
Panel technology
IPS Panel Technology
Size Diagonal:23.8"(60.47cm)
Pixel pitch 0.275mm H × 0.275mm V
Brightness 250cd/m2(Typical)
Contrast ratio 1000:1(Typical),Adv.ContrastFunctionAvailable
Viewable angle
Right/Left:89degreeseach,Up/Down:89degreeseach(Typical)
Response time 4ms(GraytoGray)
Display Colors Approx. 16.7M
Sync Frequency Horizontal: 30.0-80.0kHz, Vertical: 55-75Hz
Native Resolution 1920 × 1080, 2.1 MegaPixels
Support max. resolution VGA: 1920 × 1080 60Hz
HDMI: 1920 × 1080 60Hz
DisplayPort: 1920 × 1080 60Hz
Input Connector VGA, HDMI, DisplayPort
Plug & Play VESA DDC2BTM
Input Sync Signal Separate sync: TTL, Positive or Negative
Input Video Signal Analog:0.7Vp-p(Standard),75Ω, Positive
Digital: HDMI, DisplayPort
Input Audio Connector ø3.5mmminijack(Stereo)
Input Audio Signal 1.0Vrms maximum
Headphone Connector ø3.5mmminijack(Stereo)
Speakers 2W×2(Stereospeakers)
Maximum Screen Size 527.04mm W × 296.46mm H / 20.7" W × 11.7" H
Power Source 100-240VAC, 50/60Hz, 1.5A
Power Consumption * 19W typical, Power management mode: 0.5W maximum
EnergyEciencyClass:A+
Dimensions / Net Weight 540.5×396.0×197.0mm/21.3×15.6×7.7"(W×H×D)
3.7kg / 8.15lbs
Tilt Angle Upward: 21.5 degrees Downward: 3.5 degrees
Environmental
Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
5 to 35°C / 41 to 95°F
10to80%(Nocondensation)
-20 to 60°C / -4 to 140°F
5to85%(Nocondensation)
Approvals CE, TÜV-Bauart, VCCI-B, PSE, CU
, ENERGY STAR
®
ENGLISH
30 APPENDIX
DIMENSIONS : ProLite XUB2493HS
():Maximumadjustmentrange
DIMENSIONS : ProLite XU2493HS
378.0mm/14.9” (508.0mm/20.0”)
47.0mm/1.9”
395.5mm/15.6”
540.5mm/21.3”
534.5mm/21.0”
322.5mm/12.7”
301.0mm/11.9”
230.0mm/9.1”
250.0mm/9.8”
540.5mm/21.3”
534.5mm/21.0”
322.5mm/12.7”
301.0mm/11.9”
47.0mm/1.9”
396.0mm/15.6”
197.0mm/7.7”
198.0mm/7.8”
ENGLISH
APPENDIX 31
M215B21
COMPLIANT TIMING
Video Mode Horizontal
Frequency Vertical
Frequency Dot Clock
640 × 480
31.469kHz 59.940Hz 25.175MHz
37.500kHz 75.000Hz 31.500MHz
37.861kHz 72.809Hz 31.500MHz
800 × 600
35.156kHz 56.250Hz 36.000MHz
37.879kHz 60.317Hz 40.000MHz
46.875kHz 75.000Hz 49.500MHz
1024 × 768
48.363kHz 60.004Hz 65.000MHz
56.476kHz 70.069Hz 75.000MHz
60.023kHz 75.029Hz 78.750MHz
1280 × 1024 63.981kHz 60.020Hz 108.000MHz
79.976kHz 75.025Hz 135.000MHz
1440 × 900 55.935kHz 59.887Hz 106.500MHz
70.635kHz 74.984Hz 136.750MHz
1680 × 1050 65.290kHz 60.000Hz 146.250MHz
1920 × 1080 66.590kHz 59.930Hz 138.500MHz