iiyama XUB3493WQSU-B1 User Manual
Displayed below is the user manual for XUB3493WQSU-B1 by iiyama which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
ENGLISH
USER MANUAL
Thank you very much for choosing the
iiyama LCD monitor.
We recommend that you take a few
minutes to read carefully through
this brief but comprehensive manual
before installing and switching on the
monitor. Please keep this manual in a
safe place for your future reference.
ENGLISH
Wereservetherighttochangespecicationswithoutnotice.
All trademarks used in this user manual are the property of their respective owners.
As an ENERGY STAR® Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines
forenergyeciency.
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the address:
http://www.iiyama.com
YoucanaccesstheWebpageofdierentcountriesfromthere.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC
Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU
“RoHS Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in
residential areas, business and light industrial premises and small-scale enterprises, inside as
well as outside of the buildings. All places of operation are characterized by their connection to
the public low voltage power supply system.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PL3493WQ
ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................ 1
SAFETY PRECAUTIONS................................................................1
SPECIAL NOTES ON LCD MONITORS .........................................3
CUSTOMER SERVICE ...................................................................3
CLEANING ......................................................................................3
BEFORE YOU OPERATE THE MONITOR ..........................................4
FEATURES......................................................................................4
CHECKING THE CONTENTS OF THE PACKAGE ........................4
INSTALLATION ...............................................................................5
FITTING AND REMOVAL OF BASE ...............................................6
CONTROLS AND CONNECTORS..................................................7
CONNECTING YOUR MONITOR ...................................................8
COMPUTER SETTING ...................................................................9
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE ..............9
OPERATING THE MONITOR .............................................................10
ADJUSTMENT MENU CONTENTS .............................................. 11
POWER MANAGEMENT FEATURE .............................................20
TROUBLE SHOOTING ......................................................................21
RECYCLING INFORMATION .............................................................22
APPENDIX ........................................................................................23
SPECIFICATIONS ......................................................................... 23
DIMENSIONS ................................................................................ 24
COMPLIANT TIMING ....................................................................24
ENGLISH
FOR YOUR SAFETY 1
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR IF YOU ARE AWARE OF ANY PROBLEMS
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the
monitor and contact your dealer or iiyama service center immediately. Further use may be
dangerousandcancausereorelectricshock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
reorelectricshock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
anyobjectinsidemaycausere,electricshockordamage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Donotusewherewatermaybesplashedorspiltontothemonitorasitmaycausereorelectric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Besuretooperatethemonitoronlywiththespeciedpowersupply.Useofanincorrectvoltagewill
causemalfunctionandmaycausereorelectricshock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objectsonthecables.Ifdamaged,thecablesmaycausereorelectricshock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS
ENGLISH
2 FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or
smokyareasasitmaycausere,electricshockordamage.Youshouldalsoavoidareaswherethe
sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not
pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
re.Toallowadequateaircirculation,placethemonitoratleast10cm(or4inches)fromanywalls.
When removing the tilt stand, the ventilation slots on the back side of the monitor can be blocked.
This may overheat the monitor and may cause fire or damage. Make sure to allow enough
ventilation when removing the tilt stand. Operating the monitor on its back, side, upside down or on
a carpet or any other soft material may also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
Whenyoumovethemonitor,turnothepowerswitch,unplugthemonitorandbesurethesignal
cableisdisconnected.Ifyoudonotdisconnectthem,itmaycausereorelectricshock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to
avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable
itselfasthismaycausereorelectricshock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may
damage your computer.
CAREFUL! PROTECT YOUR HANDS AND FINGERS
Becarefulnottohurtyourngersorhandswhenyouchangetheheightortheangle.
Injurycanoccurifcareisnottakentoavoidngercontactwiththedisplaysbasewhenadjusting
the height.
REMARK FOR 24/7 USAGE
Thisproductisnotspecicallydesignedfor24/7usageinallenvironments.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
Foroptimalviewingcomfort,themonitorshouldbejustbeloweyeleveland40-60cm(16-24inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
ENGLISH
FOR YOUR SAFETY 3
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE
When you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture position to
the correct position.
Youmayndslightlyunevenbrightnessonthescreendependingonthedesktoppattern
you use.
Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screencanberecoveredslowlybychangingtheimageorturningothePowerSwitch
for some hours.
SPECIAL NOTES ON LCD MONITORS
If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or replacement
packaging.
WARNING
If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.
CAUTION
Forsafety reasons, turno the powerswitch and unplugthe monitor beforeyou
clean it.
To protect the LCD panel, do not scratch or rub the screen with a hard object.
Never use any of the following strong solvents. These will damage the cabinet and
the LCD screen.
Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
Thinner
Benzine
Abrasive cleaner
Spray-type cleaner
Wax
Acid or Alkaline solvent
CABINET Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
LCD
SCREEN
Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
CUSTOMER SERVICE
CLEANING
NOTE
NOTE
ENGLISH
4 BEFORE YOU OPERATE THE MONITOR
The following accessories are included in your package. Check to see if they are enclosed with
the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional
iiyamaoce.
BEFORE YOU OPERATE THE MONITOR
CHECKING THE CONTENTS OF THE PACKAGE
FEATURES
Supports Resolutions up to 3440 × 1440
High Contrast 1000:1 (Typical), Adv. Contrast Function Available / Brightness
400cd/m2 (Typical) / Quick Response Time 4ms (Gray to Gray)
Supports AMD Radeon FreeSync™ Technology
Flicker - Free
Blue Light Reducer
Digital Character Smoothing
Stereo Speakers
2 × 5W Stereo Speakers
Power Management (VESA DPMS Compliant)
VESA Mounting Standard (100mm×100mm) Compliant
Keyhole for Security Lock
* The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used. However, all guarantees and warranties are void for any
problems or damage caused by a power cable not supplied by iiyama.
An approved power cable greater or equal to H05VVF, 3G, 0.75mm² must be
used.
Power Cable*
HDMI Cable DisplayPort Cable
USB Cable Stand-Base with a screw Safety Guide
Quick Start Guide
CAUTION
ENGLISH
BEFORE YOU OPERATE THE MONITOR 5
INSTALLATION
When you use with the wall mounting, in consideration of thickness of the mounting
stage, tighten the M4 Screw with washer which “L” length is 10mm to fasten the
monitor. Using the screw longer than this may cause electric shock or damage
because it may contact with the electrical parts inside the monitor.
WARNING
Screw
Chassis
Mounting Stage
L
[WALL MOUNTING]
[ROTATING THE MONITOR]
Available
Landscape
Portrait
Power Indicator
Power Indicator
Power Indicator
Not Available
A
A
A
A
This monitor can only be used in landscape. Do not rotate or operate the monitor in any other
orientation than landscape.
Before installation, make sure the wall, ceiling or desktop arm is strong enough to
hold the necessary weight of the display and the mount.
WARNING
ENGLISH
6 BEFORE YOU OPERATE THE MONITOR
Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid an electric shock or a
damage.
CAUTION
FITTING AND REMOVAL OF BASE
Thumb screw for Stand-Base
Stand-Base
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Laythemonitoratonatablewithfrontfacedown.
Install the Stand-Base as shown on the below picture.
Tighten the ‘thumb screw’ to secure the Stand-Base to the monitor.
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Laythemonitoratonatablewithfrontfacedown.
Loosen the ‘thumb screw’ to remove the Stand-Base from the monitor.
Stand-Base
Hook
ENGLISH
BEFORE YOU OPERATE THE MONITOR 7
CONTROLS AND CONNECTORS
Power Indicator
Blue: Normal operation
Orange: Power Management
Speakers
Cable Hole
Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
USB Downstream Connector ( )
USBDownstream(BatteryCharger)Connector( )
USBUpstreamConnector( )
Headphone Connector( )
DisplayPortConnector(DP)
HDMIConnector(HDMI2)
HDMIConnector(HDMI1)
ACConnector( :Alternatingcurrent)
PowerSwitch()
MenuButton(MENU)
Right / Volume Button( / )*
Left / ECO Mode Button ( / )*
Input Select / Exit Button (INPUT/EXIT)*
* You can skip the Menu items and directly display an option setting screen or an adjustment scale.
<Front> <Back>
NOTE
NOTE
ENGLISH
8 BEFORE YOU OPERATE THE MONITOR
CONNECTING YOUR MONITOR
Ensurethatboththecomputerandthemonitorareswitchedo.
Connect the computer to the monitor with the signal cable.
Connect the computer to the monitor with the USB Cable.
ConnectthePowerCabletothemonitorrstandthentothepowersource.
Turn on your monitor and computer.
[Example of Connection]
<Back>
NOTE The signal cables used for connecting the computer and monitor may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the monitor and the computer. The cable supplied with the monitor is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regionaliiyamaoce.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyamaoceforasuitableadaptor.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.
[ Collect Cables ]
Put the cables through the Cable Hole to
bundle them.
Mouse Keyboard
Power Cable (Accessory)
HDMI Cable (Accessory)
HDMI Cable (Not included)
DisplayPort Cable (Accessory)
Computer
AV Equipment etc.
USB Cable (Accessory)
ENGLISH
BEFORE YOU OPERATE THE MONITOR 9
Signal Timing
Change to the desired signal timing listed on page 24: COMPLIANT TIMING.
COMPUTER SETTING
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE
For optimal viewing it is recommended to
position yourself directly opposite to the full face
of the monitor, then adjust the monitor’s height
and angle to your own preference.
Hold the panel so that the monitor does not topple
when you change the monitor’s height or angle.
You are able to adjust the monitor's height up to
130mm, angle up to 45 degrees right and left, 22
degrees upward and 3 degrees downward.
Do not touch the LCD screen when you
change the height or the angle. It may
cause damage or break the LCD screen.
Careful attention is required not to pinch
your fingers or hands into the moving
part of the stand when you change the
angle.
Injury can occur if care is not taken to
avoidngercontactwiththedisplays
base when adjusting the height.
NOTE
Monitor
Stand
130mm
3° 22°
45° 45°
ENGLISH
10 OPERATING THE MONITOR
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the
COMPLIANT TIMING shown on page 24. You are also able to adjust the picture by following the button
operation shown below.
When button operations are aborted during adjustment, On-Screen Display disappears
when the time set for the OSD Time Out has passed. Also, the EXIT Button can be used
toreturnpreviousmenuandturnotheOn-ScreenDisplay.
Any changes are automatically saved in the memory when the On Screen Display
disappears.TurningothepowershouldbeavoidedwhileusingtheMenu.
NOTE
Press the MENU Button to start the On Screen Display (OSD) feature. There are
additional Menu items which can be switched by using the / Buttons.
Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Press the INPUT Button. Then, use the
/
Buttons to highlight
the desired adjustment icon.
Press the
MENU
Button again. Use the / Buttons to make the appropriate
adjustment or setting.
Press the EXIT Button to leave the menu, and the settings you just made would be
automatically saved.
For example, to correct for OSD vertical position, select Menu item of OSD Settings and press
the MENU Button. Then, select OSD V. Position by using the / Buttons and press the
MENU Button. Use the / Buttons to change the OSD vertical position settings. The OSD
vertical position should be changing accordingly while you are doing this.
When you press the EXIT Button to end the adjustment, all changes are saved in the memory.
PICTURE
COLOR
PIP/PBP
INPUT SELECT
AUDIO
LANGUAGE
OSD SETTINGS
SETUP MENU
OSD H. POSITION
OSD V. POSITION
OSD BACKGROUND
OSD TIME OUT
50
50
OFF
10s
ProLite XUB3493WQSU
ENGLISH
OPERATING THE MONITOR 11
ADJUSTMENT MENU CONTENTS
Too dark
Too bright
Brightness *3,4
Too dull
Too intense
Adv. Contrast *1,4 Increase Contrast RatioOn
O Typical Contrast Ratio
Adjustment Item Problem / Option Button to Press
Contrast *4
Overdrive *1,4
O/-2/-1/0/+1/+2
Improve the gray level response time of the LCD
panel.
A higher level results in a faster response time.
Full Screen Full screen display
Picture Format *1
Sharpness *1
You can change the picture quality from 0 to 100
(sharptosoft).
Press the Button to change the picture quality in
numerical order. Press the Button to change the
picture quality in reverse numerical order.
Adjust the picture quality at resolutions of less than
3440 × 1440.
You can change the picture quality.
Picture
Black Tuner From-5to+5
You can adjust Dark shades.
17 inch
19 inch
19.5 inch
21.5 inch
23 inch
Displaythepictureas17inchscreen(5:4)
Displaythepictureas19inchscreen(5:4)
Displaythepictureas19.5inchscreen(16:9)
Displaythepictureas21.5inchscreen(16:9)
Displaythepictureas23inchscreen(16:9)
24 inch Displaythepictureas24inchscreen(16:9)
27 inch Displaythepictureas27inchscreen(16:9)
PICTURE
COLOR
PIP/PBP
INPUT SELECT
AUDIO
LANGUAGE
OSD SETTINGS
SETUP MENU
PICTURE FORMAT
BRIGHTNESS
CONTRAST
BLACK TUNER
50
80
FULL SCREEN
0
0
50
OFF
OFF
OFF
SHARPNESS
OVERDRIVE
ADV. CONTRAST
ECO MODE
X-RES TECHNOLOGY
ProLite XUB3493WQSU
Expansion display of Aspect
Aspect Ratio *2
Display the picture dot by dot.
Dot By Dot *2
ENGLISH
12 OPERATING THE MONITOR
Adjustment Item Problem / Option
Picture
Enhance the picture edge.
O Normal
Soft
Enhance the picture edge more than the Middle option.Hard
X-Res Technology Enhance the picture edge more than the Soft option.
Middle
You can skip the Menu items and directly display an option setting screen by using the following
button operations.
ECO Mode: Press the Button when the Menu is not displayed.
Direct
PICTURE
COLOR
PIP/PBP
INPUT SELECT
AUDIO
LANGUAGE
OSD SETTINGS
SETUP MENU
PICTURE FORMAT
BRIGHTNESS
CONTRAST
BLACK TUNER
50
80
FULL SCREEN
0
0
50
OFF
OFF
OFF
SHARPNESS
OVERDRIVE
ADV. CONTRAST
ECO MODE
X-RES TECHNOLOGY
ProLite XUB3493WQSU
Brightness of back-light is reduced.
O Normal
ECO Mode *41
Brightness of back-light is reduced more than 1.2
Brightness of back-light is reduced more than 2.3
Direct
*1 Picture Format, Sharpness, Overdrive and Adv. Contrast are disabled when PiP/PbP Mode is
activated.
*2 Selectable only at resolutions less than 3440 × 1440.
*3 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
bright.
*4 Adjustable / settable items depend on which item is activated. See page 19 Function Correlation
Matrix for more details.
ENGLISH
OPERATING THE MONITOR 13
Too weak
Too strong
Adjustment Item Problem / Option Button to Press
User Color
Red
Green
Blue
Cool
Normal
Warm
i-Style Color *2
*1 Functions other than Blue Light Reducer is disabled when Blue Light Reducer is activated.
*2 Adjustable / settable items depend on which item is activated. See page 19 Function Correlation
Matrix for more details.
Standard For general windows environment and monitor
default setting
Text For text editing and viewing in a word processing
environment
Scenery For displaying outdoor scenery images
Cinema For movie and video environment
Game For PC game environment
O Return to a state set by color adjustment except
i-Style Color.
Blue Light Reducer *2
O Typical
1Blue light is reduced.
2Blue light is reduced more than 1.
3Blue light is reduced more than 2.
Color *1
Cool color
Normal color
Warm color
PICTURE
COLOR
PIP/PBP
INPUT SELECT
AUDIO
LANGUAGE
OSD SETTINGS
SETUP MENU
WARM
NORMAL
COOL
USER COLOR
0
100
OFF
OFF
OFF
RED
GREEN
BLUE
I-STYLE COLOR
BLUE LIGHT REDUCER
100
100
ProLite XUB3493WQSU
ENGLISH
14 OPERATING THE MONITOR
PICTURE
COLOR
PIP/PBP
INPUT SELECT
AUDIO
LANGUAGE
OSD SETTINGS
SETUP MENU
PIP/PBP MODE
SUB WIN INPUT
PIP SIZE
PIP POSITION
SMALL
TOP-RIGHT
SWAP
DISPLAYPORT
PBP
ProLite XUB3493WQSU
PiP/PbP Main Screen
HDMI1 HDMI2 DisplayPort
Sub Screen
HDMI1 –
HDMI2 –
DisplayPort
: Available
– : Not available
PiP/PbP Input Matrix
Adjustment Item Option
O PiP/PbP Mode isturnedo.
PiP/PbP Mode * Display the main screen on the left and the sub
screen on the right.
PbP
Display the sub screen in the main screen.
PiP
Select the HDMI1 input. HDMI1
Select the DisplayPort input. DisplayPort
Sub Win Input
PiP Size
PiP Position
Swap
Small
Middle
Large
Top-Right
Top-Left
Bottom-Right
Bottom-Left
Reduce the size of the Sub screen.
Increase the size of the Sub screen.
Move the sub screen to the top right corner.
Move the sub screen to the top left corner.
Move the sub screen to the bottom right corner.
Move the sub screen to the bottom left corner.
Swap the Main/Sub screens when PiP/PbP mode is active.
Normal size
* PiP = Picture in Picture
Withthisfunction,youcandisplaytwodierentpictures.
PbP = Picture by Picture
With this function, display images from two sources side by side.
Select the HDMI2 input. HDMI2
PiP/PbP
ENGLISH
OPERATING THE MONITOR 15
Adjustment Item Option
Input Select
You can skip the Menu items and directly display an option setting screen by using the following
button operations.
Input Select: Press the INPUT Button when the Menu is not displayed.
Direct
Direct
"AUTO" function enables automatic selection of the input sources available.
The input source from the computer in power management mode can not be selected.
If you manually select one of the input sources, the other source is not automatically
selected.
NOTE
Select the HDMI1 input. HDMI1
Select the DisplayPort input. DisplayPort
Search for an available input source and select
automatically.
AUTO
Select the HDMI2 input. HDMI2
Input Select *
PICTURE
COLOR
PIP/PBP
INPUT SELECT
AUDIO
LANGUAGE
OSD SETTINGS
SETUP MENU
HDMI1
HDMI2
DISPLAYPORT
AUTO
ProLite XUB3493WQSU
* "Input Select" including direct operation below is disabled when PiP/PbP function is activated.
INPUT SELECT
AUTO
HDMI 1 HDMI 2
DISPLAY
PORT
ENGLISH
16 OPERATING THE MONITOR
Volume Too soft
Too loud
Adjustment Item Problem / Option Button to Press
Mute
Direct
Return the sound volume to the previous level.
Turnothesoundtemporarily.
Select the HDMI1 input. HDMI1
Audio Input *
You can skip the Menu items and directly display an adjustment scale or an option setting screen by
using the following button operations.
Volume: Press the Button when the Menu is not displayed.
Mute: Keep pressing the Button for about 2 seconds when the Menu is not displayed.
Mute and Unmute are switched by repeating the above button operation.
O
On
Direct
Select the HDMI2 input. HDMI2
Select the DisplayPort input. DisplayPort
Audio
Direct
* "Audio Input" selection is available only when PiP/PbP function is activated.
PICTURE
COLOR
PIP/PBP
INPUT SELECT
AUDIO
LANGUAGE
OSD SETTINGS
SETUP MENU
VOLUME
MUTE
AUDIO INPUT
50
DISPLAY PORT
OFF
ProLite XUB3493WQSU
ENGLISH
OPERATING THE MONITOR 17
OSD H. Position OSD is too left
OSD is too right
OSD is too low
OSD is too high
You can set the OSD display duration time.
5 / 10 / 30 / 60 seconds
OSD V. Position
Adjustment Item Problem / Option Button to Press
OSD Time Out
OSD Background The background of OSD is made transparent.
O/1/2/3/4
English
Deutsch
English
German
Français French
Japanese
Russian
Polski Polish
Nederlands Dutch
Русский
Adjustment Item Option
Language
Česky Czech
Italiano Italian
Language
OSD Settings
PICTURE
COLOR
PIP/PBP
INPUT SELECT
AUDIO
LANGUAGE
OSD SETTINGS
SETUP MENU
Français
Deutsch
Nederlands
Polski
Česky
Italiano
日本語
ENGLISH
ProLite XUB3493WQSU
PICTURE
COLOR
PIP/PBP
INPUT SELECT
AUDIO
LANGUAGE
OSD SETTINGS
SETUP MENU
OSD H. POSITION
OSD V. POSITION
OSD BACKGROUND
OSD TIME OUT
50
50
OFF
10s
ProLite XUB3493WQSU
ENGLISH
18 OPERATING THE MONITOR
Factory-preset data is restored.
See your graphic card user guide for more
information about changing the resolution and
refresh rate.
Display the information regarding the current input signal coming from the
graphic card in your computer.
NOTE
<Example>
Adjustment Item Option
DP Format *1
Memory Recall
Information
No
Yes
Return to Menu.
iiyama Logo is displayed when the monitor is turned on.
On
O iiyama Logo is not displayed when the monitor is turned on.
Opening Logo
1.1
1.2
If any abnormal picture visible, you can change the setting
to 1.1.
Standard
HDMI RGB Range *2Full Range
Limited Range
For full-range color scale signal
For limited color scale signal
LED The Power Indicator is turned On.
O ThePowerIndicatoristurnedO.
On
TurnOthePower Indicator when you are bothered by the light.
NOTE
AutoPow.O Enable the AutoPow.O function.
O AutoPow.OfunctionisturnedO.
On
TheAutoPow.Ofunctionisenabledasdefaultsetting.Themonitorturnso
automatically 3 hours after the key operation stops.
DisableAutoPow.Ofunctionwhenyouusethemonitorcontinuouslyformorethan3
hours.
NOTE
Setup Menu
HDR On
O
ForHDR(HighDynamicRange)signal
For normal signal
FreeSync On
O
Enable the Freesync function.
TheFreesyncfunctionisturnedo.
PICTURE
COLOR
PIP/PBP
INPUT SELECT
AUDIO
LANGUAGE
OSD SETTINGS
SETUP MENU
DP FORMAT
HDMI RGB RANGE
HDR
FREESYNC
OFF
NO
ON
OPENING LOGO
LED
AUTO POW. OFF
MEMORY RECALL
INFORMATION
ON
ON
OFF
FULL RANGE
1.2
HDMI
RGB
HDR
FREE
SYNC
ProLite XUB3493WQSU
PICTURE
COLOR
PIP/PBP
INPUT SELECT
AUDIO
LANGUAGE
OSD SETTINGS
SETUP MENU
DP FORMAT
HDMI RGB RANGE
HDR
FREESYNC
OPENING LOGO
LED
AUTO POW. OFF
MEMORY RECALL
INFORMATION
RESOLUTION :
3440x1440@75Hz
H.FREQUENCY : 113 KHz
V.FREQUENCY : 75 Hz
HDMI
RGB
HDR
FREE
SYNC
ProLite XUB3493WQSU
ENGLISH
OPERATING THE MONITOR 19
*1 To display 3440 × 1440 at 75Hz, the DisplayPort setting must be enabled as 1.2, and the source
graphic card must be capable of supporting 3440 × 1440 resolution at 75Hz.
*2 Available for HDMI input only.
● Lock Mode
<OSD Menu>
1. The OSD lock will be activated by pressing the Button for 5 seconds. If you try to access the
OSD by pressing any of the buttons, message "OSD Locked" will appear on the screen.
2. The OSD lock will be deactivated by pressing the Button again for 5 seconds.
<Power Switch>
1. The power switch lock will be activated by pressing the INPUT/EXIT Button for 5 seconds.
Lockingthepowerswitchmeansthatwon'tbeabletoturnotheMonitorwhilethepowerswitch
is locked. If you press the power switch, message "Power Button Locked" will appear on the
screen.
2. The power switch lock will be deactivated by pressing the INPUT/EXIT Button again for 5
seconds.
Function Correlation Matrix
Item to be selected
Adv.
Contrast
ECO
Mode
i-Style
Color
Blue Light
Reducer Brightness Contrast Overdrive
Item
activated
Adv. Contrast –– –
ECO Mode –– –
i-Style Color –– ––––
Blue Light
Reducer –––
: Available
– : Not available
ENGLISH
20 OPERATING THE MONITOR
Even when using the power management mode, the monitor consumes electricity. Turn
othePowerSwitchwheneverthemonitorisnotinuse,duringthenightandweekends,
to avoid unnecessary power consumption.
It is possible that the video signal from the computer may be on while the H or V sync
signal is missing. In this instance, the POWER MANAGEMENT feature may not work
properly.
POWER MANAGEMENT FEATURE
Power Management Mode
Whenthe H-sync signal/V-sync signal /Hand Vsync signalsfromthe computer areo,the
monitor enters into Power Management Mode which reduces the power consumption to less
than 0.5W. The screen becomes dark, and the power indicator turns to orange. From Power
Management Mode, the image reappears in several seconds when either the keyboard or the
mouse are touched again.
The power management feature of this product complies with power saving requirement of VESA
DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor
when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer.
There is a power management step the monitor takes as described below. The power management
function,includinganytimersettingsisconguredbytheoperatingsystem.Checkyouroperating
systemmanualforinformationonhowthiscanbecongured.
0 0.5W 100%
POWER
CONSUMPTION
Blue
Orange
Power Indicator
NORMAL MODE
POWER MANAGEMENT MODE
NOTE
ENGLISH
TROUBLE SHOOTING 21
TROUBLE SHOOTING
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem
you have. If the monitor does not get a picture, skip to 2.
2.ConsultthefollowingitemsifyoucannotndanappropriateadjustmentiteminOPERATINGTHE
MONITOR or if the problem persists.
3.
If you are experiencing a problem which is not described below or you cannot correct the problem,
discontinue using the monitor and contact your dealer or iiyama service center for further assistance.
Problem Check
(Powerindicator
isorange.)
The screen is not
synchronized.
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
(Powerindicator
isblue.)
The picture does
not appear.
(Powerindicator
does not light
up.)
ThePowerCableisrmlyseatedinthesocket.
The Power Switch is turned ON.
The AC socket is live. Please check with another piece of equipment.
If the blank screen saver is in active mode, touch the keyboard or the mouse.
Increase the Contrast and/or Brightness.
The computer is ON.
The Signal Cable is properly connected.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
If the monitor is in power management mode, touch the keyboard or the mouse.
The computer is ON.
The Signal Cable is properly connected.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
The Signal Cable is properly connected.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
Thevideooutputlevelofthecomputeriswithinthespecicationofthemonitor.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
Thevideooutput level ofthecomputeris within thespecicationofthe
monitor.
Thepowervoltageiswithinthespecicationofthemonitor.
Thesignaltimingofthecomputeriswithinthespecicationofthemonitor.
The screen
position is not in
the center.
The screen is too
bright or too dark.
The screen is
shaking.
No sound.
Theaudioequipment(computeretc.)isON.
The Volume is turned up.
The Mute is OFF.
Theaudiooutputleveloftheaudioequipmentiswithinthespecicationof
the monitor.
Theaudiooutputleveloftheaudioequipmentiswithinthespecicationof
the monitor.
The sound is too
loud or too quiet.
ENGLISH
22 RECYCLING INFORMATION
For better environment protection please don't dispose your monitor.
Please visit our web site: www.iiyama.com for monitor recycling.
RECYCLING INFORMATION
ENGLISH
APPENDIX 23
SPECIFICATIONS
APPENDIX
Designandspecicationsaresubjecttochangewithoutpriornotice.
* USB peripheral and audio equipment are not connected.
NOTE
Size Category 34"
LCD
Panel
Panel technology
IPS Panel Technology
Size Diagonal:34"(86.7cm)
Pixel pitch 0.233mm H × 0.233mm V
Brightness 400cd/m2(Typical)
Contrast ratio 1000:1(Typical),Adv.ContrastFunctionAvailable
Viewable angle
Right / Left : 89 degrees each, Up / Down: 89 degrees each
(Typical)
Response time 4ms(GraytoGray)
Display Colors 16,777,216
Sync Frequency
HDMI(withoutFreeSync):
Horizontal: 30.0-115.0kHz, Vertical: 15-30 / 55-75Hz
HDMI(withFreeSync):
Horizontal: 30.0-115.0kHz, Vertical: 48-75Hz
DisplayPort(withoutFreeSync):
Horizontal: 30.0-115.0kHz, Vertical: 15-30 / 55-75Hz
DisplayPort(withFreeSync):
Horizontal: 30.0-115.0kHz, Vertical: 48-75Hz
Native Resolution 3440 × 1440, 8.3 MegaPixels
Supported max. resolution 3440 × 1440, 75Hz
Input Connector HDMI × 2, DisplayPort
Plug & Play VESA DDC2BTM
Input Video Signal HDMI, DisplayPort
USB Standard USB3.0
Number of USB Ports
Connector shape
1 Upstream : Series B
2 Downstream : Series A
Headphone Connector ø3.5mmminijack(Stereo)
Speakers 5W×2(Stereospeakers)
Maximum Screen Size 799.8mm W × 334.8mm H / 31.5" W × 13.2" H
Power Source 100-240VAC, 50/60Hz, 1.2A
Power Consumption* 43W typical, Power management mode: 0.5W maximum
EnergyEciencyClass:A
Dimensions / Net Weight
817.0×415.0-545.0×230.0mm/32.2×16.3-21.5×9.1"(W×H×D)
9.5kg / 20.9lbs
Angle Tilt: Upward: 22 degrees, Downward: 3 degrees
Swivel: Left/Right: 45 degrees each
Environmental Considerations
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
5 to 35°C / 41 to 95°F
10to80%(Nocondensation)
-20 to 60°C / -4 to 140°F
5to85%(Nocondensation)
Approvals CE, TÜV-Bauart, VCCI, PSE, EAC,
ENERGY STAR
®
ENGLISH
24 APPENDIX
DIMENSIONS
():Maximumadjustmentrange
M234A21
COMPLIANT TIMING
300.0mm/11.8”
230.0mm/9.1”
415.0mm/16.3” (545.0mm/21.5”)
58.5mm/2.3”
817.0mm/32.2”
811.0mm/31.9”
367.0mm/14.4”
343.0mm/13.5”
*1 The source graphic card must be capable of supporting 3440 × 1440 resolution at 60Hz /
75Hz.
*2 The DisplayPort setting has to be enabled as 1.2.
*3 Recommended to use on PbP mode.
NOTE
Video Mode Horizontal
Frequency Vertical
Frequency Dot Clock
800 × 600 37.879kHz 60.317Hz 40.000MHz
46.875kHz 75.000Hz 49.500MHz
1024 × 768 48.363kHz 60.004Hz 65.000MHz
60.023kHz 75.029Hz 78.750MHz
1280 × 1024 63.981kHz 60.020Hz 108.000MHz
79.976kHz 75.025Hz 135.000MHz
1680 × 1050 65.290kHz 60.000Hz 146.250MHz
1920 × 1080 66.590kHz 59.930Hz 138.500MHz
2560 × 1440 88.787kHz 59.951Hz 241.500MHz
3440 × 1440
44.790kHz 30.000Hz 200.659MHz
88.800kHz 60.000Hz 319.800MHz *1,2
113.030kHz 75.050Hz 438.540MHz *1,2
1720 × 1440 112.950kHz 75.000Hz 219.120MHz *3