KYOCERA ECOSYS PA2001w User Manual
Displayed below is the user manual for ECOSYS PA2001w by KYOCERA which is a product in the Laser Printers category. This manual has pages.
Related Manuals
Before clicking on the “accept and continue” button to commence downloading the software
(“Software”) or documentation (“Documentation”), you should carefully read the terms and conditions
of this license agreement (“Agreement”). By clicking on the “accept and continue” button you are
agreeing to be legally bound by the terms and conditions of this Agreement and agree to become
a licensee. If you do not agree to all of the terms and conditions of this Agreement you should click
on the “cancel” button and not download or use the Software and/or Documentation.
When you accept the terms and conditions of this Licence Agreement, Kyocera Document Solutions
Europe BV (“Licensor”) shall immediately grant you (the "Licensee" meaning either an individual or a
single entity) a limited, non-exclusive, non-transferrable licence to use the Software and/or the
Documentation on the terms of the Agreement.
SOFTWARE
1 Use of Software
1.1 Licensor grants Licensee a license to use one copy of the Software on one or more
computers connected to an original “KYOCERA” printer, copier or multifunctional device. Use
means any permanent or temporary use of the Software and includes the storing, loading,
installing, executing or displaying of the Software or the processing of any data contained
therein. The Software may not be used on any other hardware unless such use is granted by
a separate license agreement.
2 Intellectual Property Rights
2.1 All ownership and intellectual property rights in the Software and any derivative work(s) shall
remain exclusively with the Licensor and/or its licensors. Licensee acknowledges such
ownership rights and will not take any action to jeopardise, limit or interfere in any manner
with Licensor’s rights with respect to the Software. Furthermore, Licensee may not remove or
alter any trademark, logo, copyright or other proprietary notices, legends, symbols or labels in
the Software without the prior written permission of Licensor. Any unauthorized deviation from
this condition will result in automatic termination of the Agreement. Licensor reserves the right
to take legal action for breach of this condition.
3 Rights to copy Software
3.1 Licensee may only copy the Software where this is essential to usage. This includes the
installation and loading of the Software into the temporary memory (i.e. RAM).
3.2 Licensee may make and store one back-up copy if this is necessary for securing later use.
The copy must be marked as such. If the Software is used in the course of business and if
routine back-up copies of all data including the Software are made for the purposes of
securing data and ensuring that the computer system can be reactivated quickly after a
breakdown, only so many back-up copies may be made as are absolutely essential. They
may be used for archival purposes only.
3.3 Licensee may not make any further copies.
3.4 Licensee may not decompile the Software except and only to the extent that such activity is
expressively permitted by law. Licensee may not alter any brand names, serial numbers or
other characteristics identifying the Software or any other legal information.
4 Transfer of Software
4.1 The license will automatically terminate upon any transfer of the Software to a third party. The
transferee will be regarded as a Licensee in the meaning of this contract.
4.2 The Software may only be transferred if the transferee accepts the terms and conditions of
this Agreement. Licensee is obliged to inform the transferee of these terms and conditions. If
Licensee does not have a copy of this Agreement, he may obtain a new one from Licensor at
his own expenses.
4.3 Upon transfer Licensee must immediately destroy any copies of the Software or parts thereof
including any changed or modified copies or parts thereof. This also applies to any back-up
copies.
4.4 Licensee may not rent, lease or subdivide any rights granted by this license or transfer or
grant sublicenses unless explicitly allowed in the Agreement.
5 Limited Warranty
5.1 Subject to the limitations and exclusions of liability below, the Licensor warrants that the
Software will materially conform with any documentation that accompanies it and with any
written descriptions provided by the Licensor.
5.2 Subject to sub-Clause 5.1, the Software is provided «as is» without any warranty of any kind,
whether express or implied, including but not limited to the implied warranties of
merchantability, fitness for a particular purpose, title and non-infringement.
5.3 The Licensor does not warrant that the Software will be error-free or that such errors will be
corrected and the Licensee is solely responsible for all costs and expenses associated with
the rectification, repair or damage caused by such errors.
5.4 The Licensor shall not be liable if the Software fails to operate in accordance with the limited
warranty set out in sub-Clause 5.1 as a result of any modification, variation or addition to the
Software not performed by the Licensor or caused by any abuse, corruption or incorrect use
of the Software, including use of the Software with equipment or other software which is
incompatible.
6 Obligations to examine and to notify
6.1 Licensee is obliged to examine the Software for any evident faults. An evident fault means a
fault obvious to the average Licensee. Unless Licensor is notified of such faults within 14 days
of downloading the Software, the warranty will expire.
6.2 Licensor has to be informed of any other fault within fourteen days of its discovery.
6.3 This license does not affect any further obligations of Licensee normally owed in the course of
business.
6.4 If this obligation is violated, Licensee will be deemed to have accepted the Software as
faultless.
DOCUMENTATION
7 Warranty
7.1 Except as expressly provided herein, Licensor excludes all warranties, representations,
terms, conditions or other commitments of any kind, whether express or implied, statutory or
otherwise, and specifically disclaims all implied warranties, including (without limitation) any
warranties, representations, terms, conditions or other commitments of merchantability or
fitness for a particular purpose or of satisfactory quality or of reasonable skill and care, in
each case, to the maximum extent permitted by applicable law. Without prejudice to the
foregoing, the Documentation is provided ‘as is’, as available and without warranty of any
kind.
7.2 Information and views expressed in the Documentation, including URL and other Internet
Web site references, may change without notice.
7.3 Some examples depicted in the Documentation are provided for illustration only and are
fictitious. No real association or connection is intended or should be inferred.
8 Intellectual Property Rights
8.1 All ownership and intellectual property rights in the Documentation and any derivative work(s)
shall remain exclusively with the Licensor and/or its licensors. Licensee acknowledges such
ownership rights and will not take any action to jeopardise, limit or interfere in any manner
with Licensor’s rights with respect to the Documentation. Furthermore, Licensee may not
remove or alter any trademark, logo, copyright or other proprietary notices, legends, symbols
or labels in the Documentation without the prior written permission of Licensor. Any
unauthorised deviation from this condition will result in automatic termination of the
Agreement. Licensor reserves the right to take legal action for breach of this condition.
9 Rights to copy Documentation and use of it
9.1 Licensee may copy and use this document for its internal, reference purposes. The
Documentation is provided to Licensee for Licensee's own use and not for re-sale.
SOFTWARE AND DOCUMENTATION
10 Liability
10.1 Licensor’s total liability to Licensee for breach of this Agreement or tort is limited to the license
fee paid by the Licensee for the Software and/or the Documentation. Parties agree that
Licensor has no liability for incidental or consequential damages i.e. loss of profits, loss of
savings, or loss caused by interruption of operations.
10.2 Licensor is not liable to Licensee, under contract, tort, or otherwise, for any:
a) Loss of profit; or
b) Loss of goodwill; or
c) Loss of business; or
d) Loss of business opportunity; or
e) Loss of anticipated saving; or
f) Loss or corruption of data or information; or
g) Other special, indirect or consequential damage.
10.3 The limitations of liability set out in in this Article do not apply if the damages are the result of
Licensor’s wilful intent or deliberate recklessness.
11 Term and Termination of the Agreement
11.1 This Agreement comes into effect as soon as the Licensee has accepted the terms of this
Agreement by clicking on the “accept and continue” button.
11.2 This license and Licensee’s right to use the Software and/or Documentation terminate
automatically if Licensee is in breach of any term of this Agreement.
11.3 Both Licensor and Licensee may terminate this Agreement by a fourteen (14) days written
notice.
11.4 In the event of termination, Licensee must destroy the original and all copies of the Software
and/or Documentation and certify the destruction to Licensor.
12 No other applicable agreements, written form
12.1 This Agreement governs the contractual relation between Licensor and Licensee with regards
to the contractual obligation established by this license. There are no further agreements. Any
prior contracts or agreements are null and void upon acceptance of this Agreement.
12.2 Any amendment to this Agreement must be made in writing.
13 Notices
13.1 Any notification to Licensor shall be made in writing to the following address:
KYOCERA DOCUMENT SOLUTIONS EUROPE B.V.
Bloemlaan 4
2132 NP Hoofddorp, the Netherlands
14 Governing law and jurisdiction
14.1 All relations between Licensor and Licensee shall be deemed to have been fully governed by
and construed in accordance with the laws of the Netherlands, the application of the Vienna
Convention on Contracts for the International Sale of Goods (CISG) being excluded.
14.2 All disputes arising in connection with this Agreement shall be finally settled by the competent
court in Amsterdam, the Netherlands.