Legrand 0 765 90 User Manual
Displayed below is the user manual for 0 765 90 by Legrand which is a product in the Socket-Outlets category. This manual has pages.
Related Manuals
87045 LIMOGES Cedex
Telephone: + 33 0 5 55 06 87 87 - Fax: + 33 0 5 55 06 88 88
Technical data sheet: F01436EN/01
Cat. No(s) : 0 765 09/26/27/71/74/90
0 794 71/74
Updated : 03/10/2012 Created: 15/11/2011
1/5
MosaicTM
LCS2 Cat. 6A UTP RJ 45 socket
CONTENTS
3. INSTALLATION
The mechanisms can be surface mounted or flush mounted.
They can also be mounted in Mosaic Programme trunkings, columns,
floor boxes and office modules (min. depth 40 mm).
Rail mounting is possible using adaptor Cat. No. 0 802 99 (2 modules).
The mechanisms can be mounted on thin panels with adaptors:
Cat. No. 0 802 90 (1 module), Cat. No. 0 802 91 (2 modules),
Cat. No. 0 802 92 (2 x 1 vertical module).
1. GENERAL CHARACTERISTICS
Cat. 6A RJ 45 terminal socket for high speed connection to a network.
Enables data transmission at 10 Gbit/s.
Socket is used with Cat. 6A U/UTP cables.
2. PRESENTATION
Identification number
UTP : SA61 12
Colour code and
Contact number
Category colour code: Cat. 6A yellow
Designation Nbr. of
modules
UTP
Cat. 6A UTP RJ 45
socket 10 765 71
Cat. 6A STP RJ 45
socket - aluminium 10 794 71
Cat. 6A UTP RJ 45
socket green shutter 1 0 765 26
Cat. 6A UTP RJ 45
socket orange shutter 1 0 765 27
Cat. 6A UTP RJ 45
socket 20 765 74
Cat. 6A UTP RJ 45
socket - aluminium 20 794 74
RJ 45 safety socket
Cat. 6A UTP 20 765 90
RJ 45 socket 45°
Cat. 6A UTP 2 0 765 09
*
*
*
* Not supplied with the mechanism
40 mm
CONTENTS Page
1. General characteristics.............1
2. Presentation .....................1
3. Installation ......................1
4. Technical characteristics ...........2
5. Connection ......................2
6. Overall dimensions................2
7. Usual connection of RJ 45 sockets ...2
8. Standards and approvals ...........3
9. Performance...................3-6
0 765 71 0 765 74
Unlocking
0 334 80
MosaicTM
LCS2 Cat. 6A UTP RJ 45 socket
Technical data sheet: F01436EN/01 Updated : 03/10/2012 Created: 15/11/2011
2/5
CONTENTS
Cat. No(s) : 0 765 09/26/27/71/74/90
0 794 71/74
6. OVERALL DIMENSIONS (cont.)
Side view:
7. USUAL CONNECTION OF RJ 45
Accepts the following cable connectors :
RJ11 (4 contacts), RJ12 (6 contacts), RJ45 (9 contacts).
Double colour code EIA – TIA 568 A and B on terminals:
Conductors supported:
- Single-wire: AWG 22 to 26
- Multiple-wire: AWG 26
- Polyethylene conductor insulation: max Ø with insulation 1.58 mm.
RJ 45 connectors are equipped with a locking nut that does not require
the use of a specific tool and which enables re-cabling in the event of
error.
12
L1
L3
L2
L1 90 m
L2 5 m
L3 5 m
4. TECHNICAL CHARACTERISTICS
4.1 Material characteristics
Contacts: gold/nickel, minimum thickness of gold > 0.8 µm
Metal parts: bronze, nickel, platinum, gold
PBT polycarbonate
4.2 Electrical characteristics
Breakdown voltage 1000 V
Contact resistance 20 m
Insulation resistance 500 M at 100 V DC
Connector tested and guaranteed under PoE restrictions, IEEE 802.3af
standard and PoE+, draft standard 802.3at, up to 2500 on-load
connections / disconnections.
Tests are carried out with 2 simultaneous PoE+ circuits for a minimum
total power of 50 W.
4.3 Mechanical characteristics
Max. number of connections and disconnections: 5 without refreshing
the wiring.
Endurance: 2500 movements (plug insertion/withdrawal)
IK03
4.4 Climatic characteristics
Operating temperature: - 40° C to + 70° C
Humid heat cycle 21 days
5. CONNECTION
6. OVERALL DIMENSIONS
Front view:
45 22.5
45
45
0 765 09/74/90 - 0 794 74 0 765 26/27/71 - 0 794 71
0 765 09/26/27/71/74 - 0 794 71/74
25.2
0 765 09
45
45
25,1 15,6
MosaicTM
LCS2 Cat. 6A UTP RJ 45 socket
Technical data sheet: F01436EN/01 Updated : 03/10/2012 Created: 15/11/2011
3/5
CONTENTS
Cat. No(s) : 0 765 09/26/27/71/74/90
0 794 71/74
7. USUAL CONNECTION OF RJ 45S (cont.)
This system allows the wire pairs to be spread easily before mounting
them on the connector.
Spreading cables ensures that each pair is separated by the specified
13 mm.
Spreading pairs by 90° in relation to the cable ensures optimum
performance.
8. STANDARDS AND APPROVALS
Compliant with standards: ISO 11801 Second edition
EN 50173 Second edition
EIA/TIA-568-B.2
NF C 20730
Standard 8877 - 603.7
5
3
4
OK
9. PERFORMANCE
9.1 Performance of permanent link with cat. 6A U/UTP cable
Return loss
Attenuation
NEXT (Near end Crosstalk Attenuation)
0 dB
20
40
60
80
100 dB
1 MHz 500 Mz
0 dB
20
40
60
80
100 dB
1 MHz 500 MHz
0 dB
20
40
60
80
100 dB
1 MHz 500 MHz
MosaicTM
LCS2 Cat. 6A UTP RJ 45 socket
Technical data sheet: F01436EN/01 Updated : 03/10/2012 Created: 15/11/2011
4/5
CONTENTS
Cat. No(s) : 0 765 09/26/27/71/74/90
0 794 71/74
9. PERFORMANCE (cont.)
9.1 Performance of permanent link with cat. 6A U/UTP cable (cont.)
PS NEXT (Power Sum NEXT)
ACR-N (Attenuation to Crosstalk Ratio Near End)
ACR-F (Equal Level End Crosstalk Attenuation Far End) - (ELFEXT)
0 dB
20
40
60
80
100 dB
1 MHz 500 MHz
-20 dB
0
20
40
60
80 dB
1 MHz 500 MHz
0 dB
20
40
60
80
100 dB
1 MHz 500 MHz
9.2 Performances canal (Channel)
Return loss
Attenuation
NEXT (Near end Crosstalk Attenuation)
0 dB
20
40
60
80
100 dB
1 MHz 500 MHz
0 dB
20
40
60
80
100 dB 1 MHz 500 MHz
0 dB
20
40
60
80
100 dB
1 MHz 500 MHz
MosaicTM
LCS2 Cat. 6A UTP RJ 45 socket
Technical data sheet: F01436EN/01 Updated : 03/10/2012 Created: 15/11/2011
5/5
CONTENTS
Cat. No(s) : 0 765 09/26/27/71/74/90
0 794 71/74
0 dB
20
40
60
80
100 dB
1 MHz 500 MHz
9. PERFORMANCE (cont.)
9.2 Performances canal (Channel) (cont.)
PS NEXT (Power Sum NEXT)
ACR-N (Attenuation to Crosstalk Ratio)
ACR-F (Equal Level End Crosstalk Attenuation)
0 dB
20
40
60
80
100 dB
1 MHz 500 MHz
-20 dB
0
20
40
60
80 dB
1 MHz 500 MHz