Table of Contents
Lenovo 310-10ICR User Manual
Displayed below is the user manual for 310-10ICR by Lenovo which is a product in the Tablets category. This manual has pages.
Related Manuals
Lenovo ideapad
MIIX 310-10ICR
User Guide
Read the safety notices and important tips in the
included manuals before using your computer.
Notes
Before using the product, be sure to read Lenovo Safety and General Information Guide first.
The latest electronic compliance and environmental information are available from the
Lenovo compliance information Web sites.
To view compliance information go to: http://www.lenovo.com/compliance
-
-
To download environmental information go to: http://www.lenovo.com/ecodeclaration
Some instructions in this guide may assume that you are using Windows® 10. If you are
using another Windows operating system, some operations may be slightly different.
If you are using other operating systems, some operations may not apply to you.
The features described in this guide are common to most models. Some features may not
be available on your computer or your computer may include features that are not
described in this user guide.
•
•
•
•
•
The illustrations in this manual may differ from the actual product. The screenshots of
operating system are for reference only. Please refer to the actual product.
•
Regulatory Notice
For details, refer to Guides & Manuals at http://support.lenovo.com.
First Edition (February 2016)
© Copyright Lenovo 2016.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General
Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set
forth in Contract No. GS-35F-05925.
i
Contents
Chapter 1. Getting to know your computer..................................................................................... 1
Top view ......................................................................................................................................................... 1
Left-side view ................................................................................................................................................. 3
Right-side view .............................................................................................................................................. 4
Bottom view ................................................................................................................................................... 7
Rear view ........................................................................................................................................................ 8
Keyboard dock top view .............................................................................................................................. 9
Keyboard dock left-side view .................................................................................................................... 11
Keyboard dock right-side view ................................................................................................................. 11
Chapter 2. Starting to use Windows 10 ......................................................................................... 14
Configuring the operating system for the first time .............................................................................. 14
Operating system interface ........................................................................................................................ 14
Putting the computer to sleep or shutting it down ................................................................................ 16
Task and desktop management ................................................................................................................. 18
Connecting to a wireless network ............................................................................................................. 19
Get Started app ............................................................................................................................................ 19
Touch screen operation
.............................................................................................................................. 20
Chapter 3. Recovery system .......................................................................................................... 22
Chapter 4. Troubleshooting............................................................................................................ 24
Frequently asked questions ....................................................................................................................... 24
Troubleshooting ........................................................................................................................................... 25
Trademarks ...................................................................................................................................... 28
1
Chapter 1. Getting to know your computer
Top view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Note: The dashed areas indicate parts that are not visible externally.
Front camera Use the camera for video communication or taking photos.
Wireless LAN antennas
Connect to a wireless LAN adapter to send and receive wireless radio signals.
Wireless WAN antennas
(on select models)
Connect to a wireless WAN adapter to send and receive wireless radio signals.
Multi-touch screen Functions as the visual display as well as touchpad input.
Note: For details, see “Touch screen operation” on page 20.
2
Chapter 1. Getting to know your computer
Screen orientation
You can rotate the display panel to your preferred orientation.
The orientation of the display automatically changes (alternating between portrait and
landscape modes) depending on how you hold it.
Portrait
Landscape
Chapter 1. Getting to know your computer
3
Left-side view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Combo audio jack Connects to headsets.
Notes:
•The combo audio jack does not support conventional microphones.
•The recording function might not be supported if third-party headphones or headsets are connected,
due to different industry standards.
Speaker Provides audio output.
4
Chapter 1. Getting to know your computer
Right-side view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Power button
When the computer is off, press and hold this button to turn on the computer.
Volume up button Increases the volume level.
Volume down button Decreases the volume level.
Speaker Provides audio output.
Micro HDMI port Connects to devices with micro HDMI input such as a TV or an
external display.
Micro USB port Connects to USB devices.
AC power adapter jack Connects to the AC power adapter.
Built-in microphone Captures sound which can be used for video conferencing, voice
narration, or audio recording.
Power indicator
Symbol Indicator Indicator
status Meaning
Power
On (solid red) The tablet is charging.
On (solid amber) The tablet is connected to the AC power adapter and is
fully charged.
Off The tablet is disconnected from the AC power adapter.
Card reader Accept micro SD card (not supplied) and micro SIM card (not supplied).
Notes:
•Select models may not have the micro SIM card slot, please refer to the actual product.
•For details, see “Using the card reader” on page 5.
Chapter 1. Getting to know your computer
5
Using the card reader
Your computer supports the following types of cards:
• Micro Secure Digital (SD) card
• Micro Subscriber Identity Module (SIM) card (on select models)
Notes:
•The card tray may have two slots for different types of cards. Insert only one card in one slot at a time.
•Select models may not have the micro SIM card slot, please refer to the actual product.
•This card reader does not support SDIO devices (e.g., SDIO Bluetooth and so on.).
•The illustrations are for reference only, please refer to the actual product.
Inserting card(s)
1Turn off the tablet, and disconnect the AC adapter and any cable(s) from the tablet.
2Insert a prying pin into the tiny hole on the card tray. Press firmly and push it straight in
until the card tray pops out.
3Gently pull the card tray out of the card reader.
6
Chapter 1. Getting to know your computer
4Put card(s) in the corresponding slot on the card tray.
5Reinsert the card tray.
Removing card(s)
1Turn off the tablet, and disconnect the AC adapter and any cable(s) from the tablet.
2Insert a prying pin into the tiny hole on the card tray. Press firmly and push it straight in
until the card tray pops out.
3Gently pull the card tray out of the card reader.
4Remove card(s) from the card tray, then reinsert the card tray.
Notes:
•Do not insert or remove cards while the computer is turned on. Doing so may damage the card reader.
•Before removing the memory card, disable it by using the Windows safely remove hardware and eject
media utility to avoid data corruption.
Chapter 1. Getting to know your computer
7
Bottom view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tablet-keyboard dock
latch
Attaches the tablet to the dock keeping the tablet secured in place.
Note: For details, see “Combination of tablet and keyboard dock” on page 12.
Keyboard dock connector Connects the tablet to the keyboard dock.
8
Chapter 1. Getting to know your computer
Rear view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Rear camera Use the camera for video communication or taking photos.
Chapter 1. Getting to know your computer
9
Keyboard dock top view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tablet-keyboard dock latch Attaches the tablet to the dock keeping the tablet secured in place.
Note: For details, see “Combination of tablet and keyboard dock” on page 12.
Keyboard dock connector Connects the tablet to the keyboard dock.
System status indicators
Symbol Indicator Indicator
status Meaning
Power
On (solid white) The computer is powered on.
Off
•The computer is in sleep mode, or the display is off.
•The computer is powered off.
•The tablet is detached from the keyboard dock.
Caps lock On (solid white) Uppercase input mode is enabled. (All typed letters
are uppercase by default.)
Off Uppercase input mode is disabled.
Keyboard
Touchpad
10
Chapter 1. Getting to know your computer
Function key combinations
Through the use of the function keys, you can change operational features instantly. To use this
function, press and hold Fn
a
; then press one of the function keys
b
.
The following describes the features of each function key.
Fn + Esc: Mutes/unmutes the sound.
Fn + :Closes the currently active window.
Fn + Delete: Enables/disables the touchpad.
Fn + Backspace: Enables/disables Airplane mode.
Fn + PgUp: Activates the home key function.
Fn + PgDn: Activates the end key function.
Fn + :Increases the display brightness.
Fn + :Decreases the display brightness.
Fn + :Decreases the volume level.
Fn + :Increases the volume level.
Chapter 1. Getting to know your computer
11
Keyboard dock left-side view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
USB 2.0 port Connects to USB devices.
Keyboard dock right-side view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
USB 2.0 port Connects to USB devices.
12
Chapter 1. Getting to know your computer
Combination of tablet and keyboard dock
The Lenovo ideapad MIIX 310-10ICR is not only a tablet. It can be combined with a keyboard
dock and used as a notebook computer.
Attaching the tablet
Align the connector of the keyboard dock with the tablet and then attach the tablet in the
direction shown by the arrow.
Chapter 1. Getting to know your computer
13
Detaching the tablet
Carefully detaching the tablet in the direction shown by the arrow.
Notes:
•Be careful not to damage the connector when attaching or detaching the tablet.
•The illustrations above are for reference only, please refer to the actual product.
14
Chapter 2. Starting to use Windows 10
Configuring the operating system for the first time - - - - - - - - - - - - - - - - -
You may need to configure the operating system when it is first used.
The configuration process may include the procedures below:
• Accepting the end user license agreement
• Configuring the Internet connection
• Registering the operating system
• Creating a user account
Operating system interface - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Windows 10 comes with a powerful and useful start menu.
To open the start menu, do one of the following:
• Press the Windows key on the keyboard.
• Select Start on the lower-left corner of the desktop.
Get Started app
Settings button
Power button
All apps button
Start button
Search box
Task view button
Chapter 2. Starting to use Windows 10
15
Settings
Settings lets you perform basic tasks. You can also search for more settings with the settings
search box in the upper-right corner.
To open the settings, do the following:
• Open the start menu, and then select Settings .
Personalize the start menu
You can personalize the start menu with your favorite apps.
To personalize the start menu, do the following:
1Open the start menu, and then select All apps to display the apps list.
2Right click the app you want to add to the start menu, and then select Pin to Start.
Note: You can also drag apps from the Most used or All apps columns to add them to the start menu.
16
Chapter 2. Starting to use Windows 10
Putting the computer to sleep or shutting it down - - - - - - - - - - - - - - - - - - - -
When you have finished working with your computer, you can put it to sleep or shut it down.
Putting your computer to sleep
If you will be away from your computer for only a short time, put the computer to sleep.
When the computer is in sleep mode, you can quickly wake it to resume use, bypassing the
startup process.
To put the computer to sleep, do one of the following:
• Press the Power button.
• Open the start menu, and then select Power Sleep.
Note: Wait until the power indicator light starts blinking (indicating that the computer is in sleep mode)
before you move your computer. Moving your computer while the hard disk is spinning can damage
the hard disk, causing loss of data.
To wake the computer, do one of the following:
• Press any key on the keyboard.
• Press the Power button.
Chapter 2. Starting to use Windows 10
17
Shutting down the computer
If you are not going to use your computer for a long time, shut it down.
To shut down the computer, do one of the following:
• Open the start menu, and then select Power Shut down.
• Press and hold or right-click the Start button in the lower-left corner and select Shut down or
sign out Shut down.
18
Chapter 2. Starting to use Windows 10
Task and desktop management - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Task view
To open the task view, do one of the following:
• Select the Task view button on the task bar.
• Press the Windows key + Tab.
• Swiping in from the left edge of the screen.
Virtual desktop management
Windows 10 supports the ability to create, manage and switch between virtual desktops.
To create a new virtual desktop, do one of the following:
• Open the task view, and then select New desktop.
• Press the Windows key + Ctrl + D.
To switch between different desktops, do one of the following:
• Open the task view and select the desktop you want active.
• Press the Windows key + Ctrl + / to scroll through the desktops you’ve created.
Chapter 2. Starting to use Windows 10
19
Connecting to a wireless network - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Enabling wireless connection
To enable wireless functions, do the following:
1Press Fn + Backspace to disable airplane mode.
2Click on the lower-right corner of the task bar to open the network configuration page.
Connecting to a wireless network
After wireless has been enabled, the computer will automatically scan for available wireless
networks and display them in the wireless network list. To connect to a wireless network, click
the network name in the list, and then click Connect.
Note: Some networks require a network security key or passphrase for connection. To connect to one of
those networks, ask the network administrator or the Internet service provider (ISP) for the security
key or passphrase.
Get Started app - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Windows 10 also provides the Get Started app to explain the new features of Windows 10. You
can find it on the start menu.
To open the Get Started app, do one of the following:
• Open the start menu and select Get Started .
• Press Windows key + Fn + F1 (depending on your keyboard layout).
20
Chapter 2. Starting to use Windows 10
Touch screen operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
The display panel can accept inputs like a tablet, using the multi-touch screen, or like a
traditional notebook computer, using the keyboard and touchpad.
Multi-touch gestures
You can touch the screen with one or more fingertips to perform a variety of tasks.
Frequently used gestures Tasks performed
Tap
Tap once on an item.
Performs an action, such as starting an app,
opening a link, or performing a command.
Similar to left-clicking with a mouse.
Press and hold
Press your finger down and leave it there for a
moment.
Enables you to see detailed information
before selecting an action. Can also open a
menu with more options. Similar to right-
clicking with a mouse.
Zoom
Move two fingers together or apart while
touching the screen.
Zooms in and out on visual apps, such as
pictures and maps. Can also jump to the
beginning or end of a list.
Chapter 2. Starting to use Windows 10
21
Rotate
Place two or more fingers on an item and then
turn your hand.
Rotates an object (Note: Not all items can be
rotated, depending upon the app.).
Slide
Drag your finger across the screen.
Pans or scrolls through lists and pages. Can
also move an object or be used to draw or
write, depending upon the app. Similar to
pressing and holding to pan and to
scrolling with a mouse.
Swipe
Start from left/right edge of the screen, then
swipe inwards toward the center.
Swiping in from the left edge of the screen
can open the task view.
Swiping in from the right edge of the screen
displays the action center.
(continued)
Frequently used gestures Tasks performed
22
Chapter 3. Recovery system
Introduction
Push-button reset is a built-in recovery tool that enables users to restore their operating system
to its original state. This preserves their data and important customizations, without the need to
back up their data in advance.
The following Push-button reset features are available to users from multiple locations
within Windows:
Refreshing the computer
Fixes software problems by reinstalling the factory default configuration. This preserves the
user’s data, important settings, and any Windows Store apps previously purchased from the
Windows Store.
Resetting the computer
Prepares the computer for recycling or transfer of ownership. This reinstalls the factory default
configuration and returns all user data and applications to the state of their original Out-of-Box
Experience (OOBE).
Using Push-button reset
Push-button reset can be launched using one of the following methods:
• Power button + Volume up button:
- Shut down the computer and wait at least five seconds.
- Press and hold the volume up button and then press the Power button, until the Novo
Menu appears on the screen.
•Settings:
-Settings Update & security Recovery Advanced startup select Restart now.
For more instructions, see the Windows Help and Support file on your computer.
When I purchased my computer, it included a copy of Windows. How can I determine whether the
copy of Windows is preinstalled by Lenovo?
On the outside of the sales package of your computer, you should find a label containing
configuration information for your computer. Check the printed string next to OS. If it contains
Windows or WIN, the copy of Windows was preinstalled by Lenovo.
What is the Recovery Partition?
If your computer is preinstalled with any version of Windows 10, the storage device of your
computer contains a Recovery Partition. This partition contains the image file of the preinstalled
Windows operating system. In cases of system failure, you can use the Lenovo OneKey Recovery
system or the Windows Reset feature to restore the operating system to its factory status.
Note: The Recovery Partition is not assigned a drive letter and cannot be accessed through Windows File
Explorer.
Chapter 3. Recovery system
23
I uninstalled a preinstalled software, but there is no significant increase in the free drive space.
The copy of Windows running on your computer may be WIMBoot-enabled. For computers
with WIMBoot-enabled Windows, the majority of files needed for preinstalled software are
installed on the Recovery Partition and won’t be deleted through normal uninstallation.
What happens if I attempt to delete or modify the Recovery Partition?
Attention:
•Do not delete or modify the Recovery Partition on a WIMBoot-enabled computer.
If the Recovery Partition is deleted or modified, you may not be able to restore Windows to the
factory status. For computer models on which WIMBoot is enabled, deleting the Recovery
Partition may cause Windows to fail to start.
How can I determine whether the Windows running on my computer is WIMBoot enabled?
WIMBoot technology is normally enabled on copies of Windows 10 Update running on SSD
(or eMMC) -only computer models. To check your computer,
1On the start menu, click the Search box.
2Make sure Settings is selected as the search scope and type Disk Management in the
search box.
3Click the search result and the Disk Management program starts.
If Wim Boot is labeled on the Windows partition, WIMBoot is enabled on your copy of Windows.
24
Chapter 4. Troubleshooting
Frequently asked questions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
This section lists frequently asked questions by category.
Finding information
What safety precautions should I follow when using my computer?
The Lenovo Safety and General Information Guide which came with your computer contains safety
precautions for using your computer. Read and follow all precautions during use.
Where can I find the hardware specifications for my computer?
You can find hardware specifications for your computer on the printed flyers which came with
your computer.
Where can I find warranty information?
For detailed warranty information on this machine, please visit below website to check out:
support.lenovo.com/warrantystatus.
Drivers
Where can I find drivers for the various hardware devices of my computer?
You can download the latest device drivers from the Lenovo consumer support website.
Getting help
How can I contact the customer support center?
See “Chapter 3. Getting help and service” in the Lenovo Safety and General Information Guide.
Chapter 4. Troubleshooting
25
Troubleshooting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
If you do not find your problem here, see Chapter 1. The following section only describes
problems that might negate the need to refer to the more comprehensive information in Chapter 1.
Display problems
When I turn on the
computer, nothing appears
on the screen.
•If the screen is blank, make sure that:
- The AC power adapter is connected to the computer and
the power cord is plugged into a working electrical outlet.
- The computer power is on. Press and hold the Power
button for about three seconds for confirmation.
- Press and hold the Power button for about ten seconds to
force shut down the computer. Then press the Power button
for about three seconds to restart.
•If these items are set correctly and the screen remains blank,
have the computer serviced.
The screen goes blank
while the computer is on.
•Your power management is enabled. Do one of the following
to resume from sleep mode:
- Press any key on the keyboard.
-Press the Power button.
Sleep problems
The critical low-battery
error message appears,
and the computer
immediately turns off.
•The battery power is getting low. Connect the AC power
adapter to the computer.
The computer enters sleep
mode immediately after
Power-on.
•Make sure that:
- The battery is charged.
- The operating temperature is within the acceptable range.
See “Chapter 2. Use and care Information” in the Lenovo
Safety and General Information Guide.
Note: If the battery is charged and the temperature is within range, do the following:
Press the Power button for about three seconds to turn on the computer.
Press and hold the Power button for about ten seconds to force shut down.
Press the Power button for about three seconds again to restart. Then reset the computer with the
Push-button reset recovery system.
If the problem persists, have the computer serviced.
26
Chapter 4. Troubleshooting
The computer does not
return from sleep mode
and the computer does
not work.
•If the computer does not return from sleep mode, it might be
because the battery is depleted.
•If your computer is in sleep mode, connect the AC power
adapter to the computer. Then press the Power button.
•If your computer is powered-off, connect the AC power
adapter to the computer. Then press the Power button to
resume operation.
Note: If the system still does not return from sleep mode, your system has stopped responding, and you
cannot turn off the computer; force shut down the computer (Unsaved data may be lost). To force shut
down the computer, press and hold the Power button for about ten seconds or more. If the computer
still does not turn off, remove the AC power adapter.
Display panel problems
The screen is blank. •Do the following:
- If you are using the AC power adapter or the battery, press
Fn + (located on the keyboard) to make the screen brighter.
- Press the Power button to confirm if the computer is in
sleep mode.
- If the problem persists, follow the solution in the next
problem “The screen is unreadable or distorted.”
The screen is unreadable
or distorted.
•Make sure that the screen resolution and color quality are
correctly set.
Incorrect characters
appear on the screen.
•Is the operating system or programs installed correctly?
If they are installed and configured correctly, do the following:
Press the Power button for about three seconds to turn on
the computer.
Press and hold the Power button for about ten seconds to
force shut down.
Press the Power button for about three seconds again to
restart. Then reset the computer with the Push-button
reset recovery system.
If the problem persists, have the computer serviced.
Sound problems
No sound can be heard
from the speakers even
when the volume is
turned up.
•Make sure that:
- The Mute function is off.
- The combo audio jack is not being used.
- Speakers are selected as the playback device.
Chapter 4. Troubleshooting
27
Battery problems
Your computer shuts down
before the battery status
icon shows it is empty.
-or-
Your computer operates
after the battery status
icon shows it is empty.
•Recharge the battery.
A startup problem
The Microsoft® Windows
operating system does
not start.
•For details, see “Recovery system” on page 22.
Recovery System problems
Failure to restore system
partition to factory default.
•The system partition (e.g. the partition size or the drive
capacity of C) has been modified.
Other problems
Your computer does not
respond.
•To turn off your computer, press and hold the Power button
for about ten seconds or more. If the computer still does not
respond, remove the AC power adapter.
28
Trademarks
The following terms are trademarks or registered trademarks of Lenovo in the United States,
other countries, or both.
Lenovo
ideapad
Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other
countries, or both.
©Lenovo China 2016
en-US
Rev. RP01