Table of Contents
Lenovo 330-15IKB User Manual
Displayed below is the user manual for 330-15IKB by Lenovo which is a product in the Notebooks category. This manual has pages.
Related Manuals
Lenovo ideapad 330
ideapad 330-14IKB
ideapad 330-15IKB
ideapad 330-14AST
ideapad 330-15AST
ideapad 330-15IKB Touch
User Guide
Read the safety notices and important tips in the
included manuals before using your computer.
Notes
• Before using the product, be sure to read Lenovo Safety and General Information
Guide first.
• The latest electronic compliance and environmental information are available
from the Lenovo compliance information Web sites.
- To view compliance information go to:
http://www.lenovo.com/compliance.
- To download environmental information go to:
http://www.lenovo.com/ecodeclaration.
• Some instructions in this guide may assume that you are using Windows® 10.
If you are using another Windows operating system, some operations may be
slightly different. If you are using other operating systems, some operations
may not apply to you.
• The features described in this guide are common to most models. Some
features may not be available on your computer or your computer may include
features that are not described in this user guide.
• The illustrations used in this manual are for Lenovo ideapad 330-15IKB unless
otherwise stated.
• The illustrations in this manual may differ from the actual product. The
screenshots of operating system are for reference only. Please refer to the actual
product.
Regulatory Notice
• For details, refer to Guides & Manuals at http://support.lenovo.com.
First Edition (January 2018)
© Copyright Lenovo 2018.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General
Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set
forth in Contract No. GS-35F-05925.
Lenovo
User Guide
Instructions and technical information in this manual are applicable to the following
Lenovo notebook computers unless otherwise stated.
Model name MT Model name MT
Lenovo ideapad 330-14IKB
81DA
81G2
81FC (for
Brazil only)
Lenovo ideapad 330-14AST
81D5
Lenovo ideapad 330-14IKB D Lenovo ideapad 330-14AST D
Lenovo ideapad 330-14IKB U Lenovo ideapad 330-14AST U
Lenovo ideapad 330E-14IKB D Lenovo ideapad 330E-14AST D
Lenovo ideapad 330E-14IKB U Lenovo ideapad 330E-14AST U
Lenovo ideapad 330H-14IKB Lenovo ideapad 330H-14AST
Lenovo ideapad 330L-14IKB Lenovo ideapad 330L-14AST
Lenovo ideapad 330E-14IKB Lenovo ideapad 330E-14AST
Lenovo ideapad 330R-14IKB Lenovo ideapad 330R-14AST
Lenovo ideapad 330-15IKB
81DC
81DE
81FE (for
Brazil only)
81FD (for
Brazil only)
Lenovo ideapad 330-15AST
81D6
Lenovo ideapad 330-15IKB U Lenovo ideapad 330-15AST D
Lenovo ideapad 330E-15IKB D Lenovo ideapad 330-15AST U
Lenovo ideapad 330-15IKB D Lenovo ideapad 330E-15AST D
Lenovo ideapad 330H-15IKB Lenovo ideapad 330E-15AST U
Lenovo ideapad 330L-15IKB Lenovo ideapad 330H-15AST
Lenovo ideapad 330E-15IKB Lenovo ideapad 330L-15AST
Lenovo ideapad 330R-15IKB Lenovo ideapad 330E-15AST
Lenovo ideapad 330E-15IKB U Lenovo ideapad 330R-15AST
Lenovo ideapad 330-15IKB Touch
81DH
81DJ
i
Contents
Chapter 1. Getting to know your computer ......................................... 1
Top view ..................................................................................................................... 1
Left-side view ............................................................................................................ 8
Right-side view ........................................................................................................ 12
Bottom view ............................................................................................................. 14
Chapter 2. Starting to use Windows 10 ............................................. 15
Configuring the operating system for the first time .......................................... 15
Operating system interfaces .................................................................................. 15
Putting the computer to sleep or shutting it down ............................................ 19
Connecting to a wireless network ........................................................................ 21
Get help from Windows ......................................................................................... 22
Chapter 3. Recovery system ............................................................... 23
Push-button reset .................................................................................................... 23
Chapter 4. Troubleshooting ................................................................ 25
Frequently asked questions ................................................................................... 25
Troubleshooting ...................................................................................................... 27
Appendix A. CRU instructions ............................................................ 30
Replacing the optical drive/hard disk drive (on select models) ....................... 31
Trademarks .......................................................................................... 34
1
Chapter 1. Getting to know your computer
Top view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Lenovo ideapad 330-14IKB / ideapad 330-14AST
c
f
a b
d
e
Chapter 1. Getting to know your computer
2
Lenovo ideapad 330-15IKB / ideapad 330-15AST /
ideapad 330-15IKB Touch
c
g
ab
d
e
f
Note: The dashed areas indicate parts that are not visible externally.
Attention:
•Do not open the display panel beyond 170 degrees. When closing the display panel, be
careful not to leave pens or any other objects in between the display panel and the
keyboard. Otherwise, the display panel may be damaged.
aIntegrated
camera
Use the camera for video communication.
bBuilt-in
microphone
Capture sound which can be used for video conferencing,
voice narration, or audio recording.
cComputer display The LCD display with LED backlight provides brilliant
visual output.
dWireless LAN
antennas
Connect to a wireless LAN adapter to send and receive
wireless radio signals.
ePower Key Press this key to turn on/off the computer.
When the computer is on, press and hold this key for more
than 1 second, the computer will enter sleep mode, press
and hold it for more than 4 seconds, the computer will be
turned off.
fNumeric keypad For details, see “Using the keyboard” on page 4.
gTouch pad The touch pad functions as a conventional mouse.
Touch pad: To move the pointer on the screen, slide your
fingertip over the pad in the direction in which you want
the pointer to move.
Touch pad buttons: The functions of the left/right side
correspond to those of the left/right mouse button on a
conventional mouse.
Note: You can enable/disable the touch pad by pressing F6 ( ).
Chapter 1. Getting to know your computer
3
Chapter 1. Getting to know your computer
4
Using the keyboard
Your computer has number keys and function keys and may also have a
numeric keypad incorporated into its standard keyboard.
Numeric keypad
Lenovo ideapad 330-15IKB / ideapad 330-15AST / ideapad 330-
15IKB Touch
The keyboard has a separate numeric keypad. To enable or disable the
numeric keypad, press the Num Lock key.
Hotkeys
You can access certain system settings quickly by pressing the appropriate
hotkeys.
Lenovo ideapad 330-14IKB / ideapad 330-14AST
Chapter 1. Getting to know your computer
5
Lenovo ideapad 330-15IKB / ideapad 330-15AST /
ideapad 330-15IKB Touch
Mutes/unmutes the sound. Enables/disables airplane
mode.
Decreases the volume
level. Enables/disables camera.
Increases the volume level. Locks/unlocks the LCD
screen.
Enables/disables
microphone.
Enables the external
projector or dangles the
external display.
Refreshes page. Decreases display
brightness.
Enables/disables the touch
pad.
Increases display
brightness.
Note: If you changed the Hotkey Mode from Enabled to Disabled in the BIOS setup utility,
you will need to press the Fn key in combination with the appropriate hotkey.
Chapter 1. Getting to know your computer
6
Function key combinations
Through the use of the function keys, you can change operational features
instantly. To use this function, press and hold Fn a; then press one of the
function keys b.
Lenovo ideapad 330-14IKB / ideapad 330-14AST
a
b
Lenovo ideapad 330-15IKB / ideapad 330-15AST /
ideapad 330-15IKB Touch
a
b
Chapter 1. Getting to know your computer
7
The following describes the features of each function key.
Fn + B: Activates the break function.
Fn + P: Activates the pause function.
Fn + C: Enables/Disables the scroll lock.
Fn + Y: Activates the system request.
Fn + S + V: Set the battery Ship Mode.
Chapter 1. Getting to know your computer
8
Left-side view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Lenovo ideapad 330-14AST / ideapad 330-15AST
ab c d e gf i jk
Lenovo ideapad 330-14IKB / ideapad 330-15IKB / ideapad 330-
15IKB Touch
ab c d e g ih jk
aAC power
adapter jack
Connects to the AC power adapter.
bBattery/Charging
status indicator
AC power
adapter
status
Indicator status Meaning
Disconnected
Off The computer is in sleep mode or turned
off; The battery has more than 20%
charge.
Solid amber The battery has between 5% and 20%
charge.
Fast blinking amber The battery has between 1% and 5%
charge.
Connected
Slow blinking amber The battery is being charged. When
battery charge reaches 20%, the blinking
color changes to white.
Slow blinking white The battery has between 20% and 80%
charge and is still charging. When the
battery reaches 80% charge the light will
stop blinking.
Solid white The battery has more than 80% charge,
charging will continue until the battery
is fully charged.
cRJ-45 port Connects the computer to an Ethernet network.
dHDMI port Connects to devices with HDMI input such as a TV or a
display.
eUSB 3.0 port Connects to USB devices.
Note: For details, see “Connecting USB devices” on page 11.
fUSB 2.0 port (on
select models)
Connects to USB devices.
Note: For details, see “Connecting USB devices” on page 11.
Chapter 1. Getting to know your computer
9
gCombo audio
jack
Connects to headsets.
•The combo audio jack does not support conventional microphones.
•The recording function may not be supported if third-party headphones or headsets are
connected, due to different industry standards.
hType-C port (on
select models)
Type-C port supports:
• USB 3.0 (Gen1, Output 5V DC, 0.9A DC)
iMemory card slot Insert memory cards (not supplied) here.
Note: For details, see “Using memory cards (not supplied)” on page 13.
jNovo button When the computer is off, press this button to start the
System Recovery or the BIOS setup utility, or to enter the
boot menu.
kPower status
indicator
Indicator Indicator status Meaning
Power status
indicator
On (solid white) The computer is powered on.
Blinking The computer is in sleep mode.
Off The computer is powered off.
Chapter 1. Getting to know your computer
10
Notes:
Chapter 1. Getting to know your computer
11
Connecting USB devices
You can connect a USB device to your computer by inserting its USB plug
(Type A) into the USB port on your computer.
The first time you plug a USB device into a particular USB port on your
computer, Windows automatically installs a driver for that device. After the
driver has been installed, you can disconnect and reconnect the device
without performing any additional steps.
Note: Typically, Windows detects a new device after it has been connected, and then installs
the driver automatically. However, some devices may require you to install the driver
before connecting. Check the documentation provided by the device’s manufacturer
before connecting the device.
Before disconnecting a USB storage device, make sure your computer has
finished transferring data to that device. Click the Safely Remove Hardware
and Eject Media icon in the Windows notification area to remove the device
before disconnecting.
Note: If your USB device uses a power cord, connect the device to a power source before
connecting it. Otherwise, the device may not be recognized.
Chapter 1. Getting to know your computer
12
Right-side view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
aOptical disc drive
(on select
models)
Reads/Burns optical discs.
aDummy module
(on select
models)/hard
disk drive (on
select models)
Note: Some models are supplied with a dummy module. For some models, you can buy an
optical disc drive to replace the dummy module. For some models, you can buy an
optical disc drive or a hard disk drive to replace the dummy module.
bKensington
Security slot
Attach a security lock (not supplied) here to help protect
your computer from theft and unauthorized use. You can
attach a security lock to your computer to help prevent it
from being removed without your permission. For details
on installing the security lock, please refer to the
instructions shipped with the security lock that you have
purchased.
•Before purchasing any security product, verify that it is compatible with this type of
security keyhole.
•You are responsible for evaluating, selecting, and implementing the locking devices and
security features. Lenovo offers no comment, judgment, or warranty regarding the
function, quality, or performance of locking devices and security features.
Notes:
Chapter 1. Getting to know your computer
13
Using memory cards (not supplied)
Your computer supports the following types of memory cards:
• Secure Digital (SD) card
• Secure Digital High Capacity (SDHC) card
• SD eXtended Capacity (SDXC) card
• MultiMediaCard (MMC)
•Insert only one card in the slot at a time.
•This card reader does not support SDIO devices (e.g., SDIO Bluetooth, etc.).
Inserting a memory card
Insert the memory card until it touches the bottom of the slot.
Removing a memory card
Gently pull the memory card out of the memory card slot.
Note: Before removing the memory card, disable it by using the Windows safely remove
hardware and eject media utility to avoid data corruption.
Notes:
Chapter 1. Getting to know your computer
14
Bottom view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
aVentilation slots Dissipate internal heat.
Note: Make sure that none of the ventilation slots are blocked, or else overheating of the
computer may occur.
bSpeakers Provide audio output.
15
Chapter 2. Starting to use Windows 10
Configuring the operating system for the
first time - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
You may need to configure the operating system when it is first used. The
configuration process may include the procedures below:
• Accepting the end user license agreement
• Configuring the internet connection
• Registering the operating system
• Creating a user account
Operating system interfaces - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
The Start menu
Windows 10 comes with a powerful and useful start menu. To open the start
menu, do one of the following:
• Select the Start button in the lower-left corner, the Start menu is displayed.
• Press the Windows key on the keyboard.
Chapter 2. Starting to use Windows 10
16
The power button is on the Start menu. Select it and you can choose to shut
down or restart the computer, or put the computer into sleep mode.
Through the Start menu, you can locate all the installed apps or view the
frequently used apps.
Chapter 2. Starting to use Windows 10
17
The ACTION CENTER
Select the ACTION CENTER icon on the taskbar and the ACTION
CENTER is displayed.
From the ACTION CENTER, you can examine important notifications from
Windows and your apps. Moreover, you can change common settings
quickly.
Task View in taskbar
In Windows 10, you can add a new desktop and switch between different
desktops.
To add a new desktop, do the following:
• Click the Task View icon in the taskbar area.
Chapter 2. Starting to use Windows 10
18
•Click New desktop.
To switch between desktops, click the Task View icon , then select your
desired desktop.
Chapter 2. Starting to use Windows 10
19
Putting the computer to sleep or shutting
it down - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
When you have finished working with your computer, you can put it to sleep
or shut it down.
Putting your computer to sleep
If you will be away from your computer for only a short time, put the
computer to sleep.
When the computer is in sleep mode, you can quickly wake it to resume use,
bypassing the startup process.
To put the computer to sleep, do one of the following:
• Close the display lid.
• Press the power button.
• Move the cursor to the lower-left corner, and then select the Start button.
Select Power Sleep.
Note: Put your computer to sleep before you move it. Moving your computer while the hard
disk drive is spinning can damage the hard disk, causing loss of data.
To wake up the computer, perform the following:
• Press any key on the keyboard.
• Press the power button.
Chapter 2. Starting to use Windows 10
20
Shutting down the computer
If you are not going to use your computer for a long time, shut it down.
To shut down your computer, do one of the following:
• Move the cursor to the lower-left corner, and then select the Start button.
Select Power Shut down.
• Right-click the Start button in the lower-left corner and select Shut down or
sign out Shut down.
Chapter 2. Starting to use Windows 10
21
Connecting to a wireless network - - - - - - - - - - - - - - - - - - - - - - - - - - -
Enabling wireless connection
To enable wireless functions, do one of the following:
• Click the ACTION CENTER icon in the notification area, and then
deselect Airplane mode.
•Press to disable airplane mode.
• Click Settings Network & Internet Airplane mode to open the
network configuration page. Then toggle the airplane mode switch to Off.
Connecting to a wireless network
After wireless has been enabled, the computer will automatically scan for
available wireless networks and display them in the wireless network list. To
connect to a wireless network, click the network name in the list, and then
click Connect.
Note: Some networks require a network security key or passphrase for connection. To
connect to one of those networks, ask the network administrator or the Internet Service
Provider (ISP) for the security key or passphrase.
Chapter 2. Starting to use Windows 10
22
Get help from Windows - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
If you have a problem with the operating system, see the Windows Get Help
app. To open it, do the following:
• Move the cursor to the lower-left corner, and then select the Start button.
Select Get Help from All apps.
23
Chapter 3. Recovery system
Push-button reset - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Push-button reset is a built-in recovery tool that enables users to restore
their operating system to its original state. This preserves their data and
important customizations, without the need to back up their data in advance.
The following Push-button reset features are available to users from
multiple locations within Windows:
Refreshing the computer
Fixes software problems by reinstalling the factory default configuration.
This preserves the user’s data, important settings, and any Windows Store
apps previously purchased from the Windows Store.
Resetting the computer
Prepares the computer for recycling or transfer of ownership. This reinstalls
the factory default configuration and returns all user data and applications to
the state of their original Out-of-Box Experience (OOBE).
Using Push-button reset
Push-button reset can be launched using one of the following methods:
• Novo button:
- Shut down the computer and wait at least five seconds. Press the Novo
button and then select System Recovery.
• Settings:
-Settings Update & security Recovery Advanced startup select
Restart now.
For more instructions, see the Windows Help and Support file on your
computer.
When I purchased my computer, it included a copy of Windows. How can I
determine whether the copy of Windows is preinstalled by Lenovo?
On the outside of the sales package of your computer, you should find a
label containing configuration information for your computer. Check the
printed string next to OS. If it contains Windows or WIN, the copy of
Windows was preinstalled by Lenovo.
Chapter 3. Recovery system
24
I uninstalled a preinstalled software, but there is no significant increase in the
free drive space.
The copy of Windows running on your computer may be Compact
technology enabled. For computers with Compact technology enabled
Windows, the majority of files needed for preinstalled software are
installed on the Recovery Partition and won’t be deleted through normal
uninstallation.
How can I determine whether the Windows running on my computer is
Compact technology enabled?
Compact technology is normally enabled on copies of Windows 10 Update
running on SSD (or eMMC) -only computer models. To check your
computer,
1Right-click the Start button in the lower-left corner and select Disk
Management.
2The Disk Management program starts.
If Wim Boot is labeled on the Windows partition (as illustrated), Compact
technology is enabled on your copy of Windows.
Where can I find drivers for the various hardware devices of my computer?
If your computer is preinstalled with a Windows operating system, first
check the installation program on the D partition of your hard disk (for
select models, on the C partition). If you cannot find the drivers for all the
hardware devices that you need there, download the drivers from the
Lenovo consumer support website.
Note: The Lenovo support web site contains the latest drivers.
25
Chapter 4. Troubleshooting
Frequently asked questions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
This section lists frequently asked questions by category.
Finding information
What safety precautions should I follow when using my computer?
The Lenovo Safety and General Information Guide which came with your
computer contains safety precautions for using your computer. Read and
follow all the precautions when using your computer.
Where can I find the hardware specifications for my computer?
You can find hardware specifications for your computer from within the
Companion (or Lenovo PC Manager) app.
Where can I find warranty information?
For the warranty applicable to your computer, including the warranty
period and type of warranty service, see the Lenovo limited warranty.
Drivers and preinstalled software
Where are the installation discs for Lenovo preinstalled software (desktop
software)?
Your computer does not come with installation discs for Lenovo
preinstalled software. If you need to reinstall any preinstalled software,
you can find the installation program on the D partition of your hard disk
(for select models, on the C partition). If you cannot find the installation
program there, you can also download it from the Lenovo consumer
support website.
Where can I find drivers for the various hardware devices of my computer?
If your computer is preinstalled with a Windows operating system, Lenovo
provides drivers for all the hardware devices that you need on the D
partition of your hard disk (for select models, on the C partition). You can
also download the latest device drivers from the Lenovo consumer support
website.
Chapter 4. Troubleshooting
26
BIOS setup utility
What is the BIOS setup utility?
The BIOS setup utility is ROM-based software. It displays basic computer
information and provides options for setting boot devices, security,
hardware mode, and other preferences.
How can I start the BIOS setup utility?
To start the BIOS setup utility:
1Shut down the computer.
2Press the Novo button and then select BIOS Setup.
How can I change the boot mode?
There are two boot modes: UEFI and Legacy Support. To change the boot
mode, start the BIOS setup utility and set boot mode to UEFI or Legacy
Support on the boot menu.
When do I need to change the boot mode?
The default boot mode for your computer is UEFI mode. If you need to
install a legacy operating system, such as Windows, Linux or Dos, etc (that
is, any operating system before Windows 8) on your computer, you must
change the boot mode to Legacy Support. The legacy operating system,
such as Windows, Linux or Dos, etc cannot be installed if you don't change
the boot mode.
Getting help
How can I contact the customer support center?
See “Chapter 3. Getting help and service” of Lenovo Safety and General
Information Guide.
Chapter 4. Troubleshooting
27
Troubleshooting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Display problems
When I turn on the
computer, nothing appears
on the screen.
•If the screen is blank, make sure that:
- The AC power adapter is connected to the
computer, and the power cord is plugged into a
working electrical outlet.
- The computer power is on. Press the Power key
again for confirmation.
•If these items are set correctly, and the screen remains
blank, have the computer serviced.
When I turn on the
computer, only a white
cursor appears on a blank
screen.
•Restore backed-up files to your Windows
environment or the entire contents of your hard disk
to its original factory contents using the Push-button
reset. If you still see only the cursor on the screen,
have the computer serviced.
The screen goes blank
while the computer is on.
•Your power management is enabled. Perform the
following to resume from sleep mode:
- Press any key on the keyboard.
Sleep problems
The critical low-battery
error message appears,
and the computer
immediately turns off.
•The battery power is getting low. Connect the AC
power adapter to the computer.
The computer enters sleep
mode immediately after
Power-on.
•Make sure that:
- The battery is charged.
- The operating temperature is within the acceptable
range. See “Chapter 2. Use and care Information” in
the Lenovo Safety and General Information Guide.
Note: If the battery is charged and the temperature is within range, have the computer
serviced.
The computer does not
return from sleep mode and
the computer does not
work.
•If your computer is in sleep mode, connect the AC
power adapter to the computer, then press the Power
button.
•If the system still does not return from sleep mode,
your system has stopped responding, and you cannot
turn off the computer; reset the computer. Unsaved
data may be lost. To reset the computer, press and
hold the Power key for eight seconds or more. If the
computer still does not reset, remove the AC power
adapter.
Display panel problems
The screen is blank. •Do the following:
- If you are using the AC power adapter or the
battery, and the battery status indicator is on, press
F12 ( ) to make the screen brighter.
- If the power indicator is blinking, press the Power
key to resume from sleep mode.
- If the problem persists, follow the solution in the
next problem “The screen is unreadable or
distorted.”
The screen is unreadable or
distorted.
•Make sure that:
- The screen resolution and color quality are correctly
set.
-The monitor type is correct.
Incorrect characters appear
on the screen.
•Is the operating system or programs installed
correctly? If they are installed and configured
correctly, have the computer serviced.
Sound problems
No sound can be heard
from the speakers even
when the volume is turned
up.
•Make sure that:
- The Mute function is off.
- The combo audio jack is not being used.
- Speakers are selected as the playback device.
Chapter 4. Troubleshooting
28
Battery problems
Your computer shuts down
before the battery status
indicator shows empty.
-or-
Your computer operates
after the battery status
indicator shows empty.
•Recharge the battery.
Other problems
Your computer does not
respond.
•To turn off your computer, press and hold the Power
key for eight seconds or more. If the computer still
does not respond, remove the AC power adapter.
•Your computer might lock when it enters sleep mode
during a communication operation. Disable the sleep
timer when you are working on the network.
The connected external
device does not work.
•Do not connect or disconnect any external device
cables other than USB while the computer power is
on. Otherwise, you might damage your computer.
•When using high power consumption external
devices, such as an external USB optical drive, use an
external device power adapter. Otherwise, the device
may not be recognized, or the system may shut down
as a result.
Chapter 4. Troubleshooting
29
30
Appendix A. CRU instructions
Customer Replaceable Units (CRUs) are parts that can be upgraded or
replaced by the customer. If a CRU is determined to be defective during the
warranty period, a replacement CRU will be provided to the customer.
Customers are responsible for installing the self-service CRUs for this
product. Customers also can install optional-service CRUs, which might
require some technical skills or tools, or request that a technician install the
optional-service CRU under the terms of the applicable warranty service
type for your country or region.
•The illustrations used in this chapter are of the Lenovo ideapad 330-15IKB, unless
otherwise stated.
•The illustrations in this manual might differ from the actual product. Please refer to the
actual product.
•The CRU service is only applicable to certain countries.
CAUTION:
Set the built-in battery in Ship Mode before replacing a CRU or sending your
computer for service.
• Turn off the computer and disconnect the AC adapter.
• Press Fn + S + V.
• Press the Power button to verify if Ship Mode has been set.
Note: When set in Ship Mode, the battery does not supply power to the computer. To awake
the battery from Ship Mode, connect the AC adapter to your computer.
Notes:
Appendix A. CRU instructions
31
Replacing the optical drive/hard disk drive (on
select models) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
To replace the optical drive/hard disk drive, do the following:
1Turn off the computer. Disconnect the AC power adapter and all cables
from the computer.
2Close the computer display and turn the computer over.
3Remove the screw a.
a
Appendix A. CRU instructions
32
4Gently pull the optical drive/hard disk drive out from its cavity b.
b
5Insert a new optical drive/hard disk drive and tighten the screw to secure
the optical drive/hard disk drive.
6Turn the computer over again.
7Connect the AC power adapter and the cables to the computer.
Appendix A. CRU instructions
33
The following table provides a list of CRUs for your computer, and informs
you of where to find replacement instructions.
Self-service CRUs
Safety, Warranty, and
Setup Guide User Guide
AC power adapter ×
Optical drive/hard disk
drive
×
34
Trademarks
The following terms are trademarks or registered trademarks of Lenovo in the
United States, other countries, or both.
Lenovo
Microsoft and Windows are trademarks of Microsoft Corporation in the United
States, other countries, or both.
Other company, products, or service names may be trademarks or service marks
of others.
en-US
Rev. AA00
©Lenovo China 2018