Table of Contents
- Product Number
- Contents
- Safety information
- Chapter 1 Getting started
- Chapter 2 Adjusting and using your monitor
- Comfort and accessibility
- Arranging your work area
- Positioning and viewing your monitor
- Quick tips for healthy work habits
- Eye Strain
- Low Blue Light
- Accessibility information
- Adjusting your monitor image
- Selecting a supported display mode
- Understanding power management
- Caring for your monitor
- Detaching the monitor stand
- Wall Mounting (Optional)
- Chapter 3 Reference information
Lenovo D22-17 User Manual
Displayed below is the user manual for D22-17 by Lenovo which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
Lenovo
D22-17
User Guide
Product Number
61FF-KAR6-WW
First Edition (12 2019)
© Copyright Lenovo 2019.All rights reserved.
LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to
governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction
and -disclosure. LIMITED AND RESTRICTED RIGHTS NOTICE: IF products, data, computer software, or services are delivered
pursuant a -General Services Administration "GSA" contract, use, reproduction, or disclosure is subject to restrictions set forth in
Contract No. -GS-35F-05925.
i ©Copyright Lenovo 2019
Contents
Product Number .......................................................................................................................................................................... i
Contents ..................................................................................................................................................................................... ii
Safety information ..................................................................................................................................................................... iii
Chapter 1 Getting started ................................................................................................................................................... 1-1
Shipping contents ....................................................................................................................................................... 1-1
Notice for use ............................................................................................................................................................. 1-1
Product overview ....................................................................................................................................................... 1-2
Types of adjustments .................................................................................................................................................. 1-2
User controls .............................................................................................................................................................. 1-2
Cable lock slot ............................................................................................................................................................ 1-3
Setting up your monitor.............................................................................................................................................. 1-3
Connecting and turning on your monitor .................................................................................................................... 1-3
Registering your option .............................................................................................................................................. 1-5
Chapter 2 Adjusting and using your monitor ...................................................................................................................... 2-1
Comfort and accessibility ............................................................................................................................................ 2-1
Arranging your work area ........................................................................................................................................... 2-1
Positioning and viewing your monitor ......................................................................................................................... 2-1
Quick tips for healthy work habits ............................................................................................................................... 2-2
Eye Strain ................................................................................................................................................................... 2-2
Low Blue Light ............................................................................................................................................................ 2-2
Accessibility information............................................................................................................................................. 2-3
Adjusting your monitor image..................................................................................................................................... 2-4
Using the direct access controls .................................................................................................................................. 2-4
Using the On-Screen Display (OSD) controls ................................................................................................................ 2-4
Selecting a supported display mode ............................................................................................................................ 2-7
Understanding power management ............................................................................................................................ 2-7
Caring for your monitor .............................................................................................................................................. 2-8
Detaching the monitor stand ...................................................................................................................................... 2-8
Wall Mounting (Optional) ........................................................................................................................................... 2-8
Chapter 3 Reference information ....................................................................................................................................... 3-1
Monitor specifications ................................................................................................................................................ 3-1
Troubleshooting ......................................................................................................................................................... 3-2
Manual image setup ................................................................................................................................................... 3-3
Manually installing the monitor driver ........................................................................................................................ 3-4
Service information .................................................................................................................................................... 3-6
Appendix A Service and Support ........................................................................................................................................ A-1
Registering your option .............................................................................................................................................. A-1
Online technical support ............................................................................................................................................. A-1
Telephone technical support ....................................................................................................................................... A-1
Appendix B Notices ............................................................................................................................................................ B-1
Recycling information ................................................................................................................................................. B-1
Collecting and recycling a disused Lenovo computer or monitor.................................................................................. B-2
Disposing of Lenovo computer components ................................................................................................................ B-2
Trademarks ................................................................................................................................................................ B-2
Power cords and power adapters ................................................................................................................................ B-2
©Copyright Lenovo 2019 ii
Safety information
General Safety guidelines
For tips to help you use your computer safety, go to:
http://www.lenovo.com/safety
Before installing this product, read the Safety Information.
DANGER
To avoid shock hazard:
Do not remove the covers.
Do not operate this product unless the stand is attached.
Do not connect or disconnect this product during an electrical storm.
The power cord plug must be connected to a properly wired and grounded power outlet.
Any equipment to which this product will be attached must also be connected to
properly wired and grounded power outlets.
To isolate the monitor from the electrical supply, you must remove the plug from the
power outlet. The power outlet should be easily accessible.
To take special precautions to avoid the introduction of hazards when operating, installing,
servicing, transporting or storing equipment, the necessary instructions shall be made available.
To reduce the risk of electric shock, do not perform any servicing other than that contained in the
operating instructions unless you are qualified to do so.
Handling:
If your monitor weighs more than 18 kg (39.68 lb), it is recommended that it be moved or
lifted by two people.
iii ©Copyright Lenovo 2019
Chapter 1 Getting started
This User’s Guide provides detailed operation instructions for the user. For quick instruction overview, please
see the Setup Poster for brief information.
Shipping contents
The product package should include the following items:
Information Flyer
Flat Panel Monitor
Power Cord
Analog Interface Cable
Monitor Stand
Monitor base
Notice for use
To setup your monitor, please see the illustrations below.
Note: Do not touch the monitor within the screen area. The screen area is glass and can be damaged by
rough handling or excessive pressure.
1. Place your monitor with the screen face down on a soft flat surface.
2. Align the stand assembly bracket to the monitor.
3. Insert the bracket towards monitor until it locks in place.
Note: To attach a VESA mount, please see “Detaching the monitor stand” on page 2-8.
1-1 D22-17 Flat Panel Monitor User’s Guide
Product overview
This section will provide information on adjusting monitor positions, setting user controls, and using the cable
lock slot.
Types of adjustments
Tilt
Please see the illustration below for an example of the tilt range.
User controls
Your monitor has controls on the front which are used to adjust the display.
For information on how to use these controls, please see “Adjusting your monitor image ” on
page 2-3.
Chapter 1 Getting Started 1-2
Cable lock slot
Your monitor is equipped with a cable lock slot located on the rear of your monitor. Please
follow the instructions that came with the cable lock to attach it.
Setting up your monitor
This section provides information to help you set up your monitor.
Connecting and turning on your monitor
Note: Be sure to read the Safety information on page iv before carrying out this procedure.
1. Power off your computer and all attached devices, and unplug the computer power cord.
2. Connect the analog signal cable to the D-SUB connector of the monitor and the other end on the
back of the computer.
1-3 D22-17 Flat Panel Monitor User’s Guide
3. Connect one end of the HDMI cable to the HDMI connector on the back of the computer, and
the other end to the HDMI connector on the monitor. Lenovo recommends that customers who
require to use the HDMI input on their monitor purchase the “Lenovo HDMI to HDMI
cableOB47070”.
For more information, go to the following:
www.lenovo.com/support/monitoraccessories
4. Plug the monitor power cord and the computer cord into grounded electrical outlets.
Note: A certified power supply cord has to be used with this equipment. The relevant national
installation and/or equipment regulations shall be considered. A certified power supply cord
not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation
H05VV-F 3G 0.75mm² or H05VVH2-F2 3G 0.75mm²) shall be used. Alternative a flexible cord
be of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm²) shall be used.
5. Power on the monitor and the computer.
Chapter 1 Getting Started 1-4
6. To install the monitor driver, you must download it from Lenovo website
(http://support.lenovo.com/docs/d22_17) and follow the instructions on page 3-4.
Registering your option
Thank you for purchasing this Lenovo TM product. Please take a few moments to
register your product and provide us with information that will help Lenovo to better
serve you in the future. Your feedback is valuable to us in developing products and
services that are important to you, as well as in developing better ways to communicate
with you. Register your option on the following Web site:
http://www.lenovo.com/register
Lenovo will send you information and updates on your registered product unless you
indicate on the Web site questionnaire that you do not want to receive further
information.
1-5 D22-17 Flat Panel Monitor User’s Guide
Chapter 2 Adjusting and using your monitor
This section will give you information on adjusting and using your monitor.
Comfort and accessibility
Good ergonomic practice is important to get the most from your personal computer and
to avoid discomfort. Arrange your workplace and the equipment you use to suit your
individual needs and the kind of work that you perform. In addition, use healthy work
habits to maximize your performance and comfort while using your computer.
Arranging your work area
Use a work surface of appropriate height and available working area to allow you to
work in comfort.
Organize you work area to match the way you use materials and equipment. Keep your
work area clean and clear for the materials that you typically use and place the items
that you use most frequently, such as the computer mouse or telephone, within the
easiest reach.
Equipment layout and setup play a large role in your working posture. The following
topics describe how to optimize equipment setup to achieve and maintain good
working posture.
Positioning and viewing your monitor
Position and adjust your computer monitor for comfortable viewing by considering the
following items:
● Viewing distance:
Optimal viewing distances for monitors range from approximately 510mm to 760mm
(20 in to 30 in) and can vary depending on ambient light and time of day. You can
achieve different viewing distances by repositioning your monitor or by modifying
your posture or chair position. Use a viewing distance that is most comfortable for
you.
● Monitor height:
Position the monitor so your head and neck are in a comfortable and neutral (vertical,
or upright) position. If your monitor does not have height adjustments, you might
have to place books or other sturdy objects under the base of the monitor to achieve
the desired height. A general guideline is to position the monitor such that the top of
the screen is at or slightly below your eye-height when you are comfortably seated.
However, be sure to optimize your monitor height so the line of site between your
eyes and the center the monitor suits your preferences for visual distance and
comfortable viewing when your eye muscles are in a relaxed stated.
● Tilt :
Adjust the tilt of your monitor to optimize the appearance of the screen content and to
accommodate your preferred head and neck posture.
● General location:
Position your monitor to avoid glare or reflections on the screen from overhead
lighting or nearby windows.
The following are some other tips for comfortable viewing of your monitor:
● Use adequate lighting for the type of work you are performing.
● Use the monitor brightness, contrast, and image adjustment controls, if equipped, to
optimize the image on your screen to meet your visual preferences.
● Keep your monitor screen clean so you can focus on the screen’s contents.
Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to
periodically look away from your monitor screen and focus on a far object to allow your
eye muscles to relax. If you have questions on eye fatigue or visual discomfort, consult a
vision care specialist for advice.
2-1 D22-17 Flat Panel Monitor User’s Guide
Quick tips for healthy work habits
The following information is a summary of some important factors to consider to help
you remain comfortable and productive while you use your computer.
● Good posture starts with equipment setup:
The layout of your work area and the setup of your computer equipment have a large
effect on your posture while using your computer. Be sure to optimize the position
and orientation of your equipment by following the tips outlined in “Arranging your
work area ” on page 2-1 so you can maintain a comfortable and productive posture.
Also, be sure to use the adjustment capabilities of your computer components and
office furniture to best suit your preferences now and as your preferences change over
time.
● Minor changes in posture can help avoid discomfort:
The longer you sit and work in front of your computer, the more important it is to
observe your working posture. Avoid as summing any one posture for an extended
period of time. Periodically make minor modifications in your posture to help deter
any discomforts that might arise. Make use of any adjustments that your office
furniture or equipment provide to accommodate changes in posture
● Short, periodic breaks help ensure healthy computing:
Because computing is primarily a static activity, it is particularly important to take
short breaks from your work. Periodically, stand up in front of your work area, stretch,
walk for a drink of water, or otherwise take a short break from using your computer.
A short break from work gives your body a welcome change in posture and helps to
ensure you remain comfortable and productive while you do work.
Eye Strain
● Break Times
Computer users should take some time away from the screen especially if working for
prolong hours. Generally, it is recommended to take short breaks (5 – 15 min.) after
1 –2 hours of continuous computer works. Taking short and frequent breaks is more
advised than longer breaks.
● Looking at Distant Objects
Users often blink less when in front of monitor screen. To minimize eye strain and
dryness, users should rest the eye periodically by focusing on objects that are far away.
● Eye Exercises
1. Alternate looking up and looking down while keeping the body and head upright.
2. Slowly roll your eyes to look to the left and right.
3. Roll eyes to look at objects on the upper right corner and then on lower right. Do
same thing to look at objects on the upper left and lower left.
Low Blue Light
Concerns on blue light affecting eye health have risen over the years. Blue light have
wavelength between 300 nm to 500 nm. The monitors have a factory setting that reduces
blue light emissions. Users can enable low blue light mode on these monitors from the
OSD settings.
1. Press to open the main OSD menu.
Chapter 2. Adjusting and Using your monitor 2-2
2. Use or to move among the icons. Select icon and press to access
this function.
3. Use or to move among the icons. Select icon and press to access
this function.
4. Use or move among the items. Select Low Blue Light and press to
confirm.
Accessibility information
Lenovo is committed to providing greater access to information and technology to
people with disabilities. With assistive technologies, users can access information in the
way most appropriate to their disability. Some of these technologies are already
provided in your operating system; others can be purchased through vendors or
accessed at:
https://lenovo.ssbbartgroup.com/lenovo/request_vpat.php
2-3 D22-17 Flat Panel Monitor User’s Guide
Adjusting your monitor image
This section describes the user control features used to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Table 2-1. Direct access controls
Icon Control Description
Input change Switches the video input source.
Image Setup Activates automatic image adjustment.
Brightness Direct access to Brightness adjustment.
Low Blue Light Press and hold for 3 seconds to
enable/disable Low Blue Light.
Main menu Open OSD main menu
Using the On-Screen Display (OSD) controls
The settings adjustable with the user controls are viewed through the On-Screen Display (OSD),
as shown below.
To use the controls:
1. Press to open the main OSD menu.
2. Use or to move among the icons. Select an icon and press to access that
function. If there is a sub-menu, you can move between options using or , then
press to select that function. Use or to make adjustments. Press to
save.
3. Press to move backwards through the sub-menus and exit from the OSD.
4. Press and hold for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold for 10 seconds to unlock the OSD
and allow adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, press and hold the buttons for 10
seconds to disable/enable DDC/CI function. The words " DDC/CI
Disable/DDC/CI/Enable" shows on the screen.
Chapter 2. Adjusting and Using your monitor 2-4
Table 2-2. OSD functions
OSD Icon on Main Menu Submenu Description Controls and
Adjustments
Brightness/Contrast
Brightness Adjusts overall brightness
Brightness/Contrast
Contrast
Adjusts difference between
light and dark areas.
Brightness/Contrast
DCR Enable dynamic contrast ratio.
On
Off
Image Position
Horizontal Position
Vertical Position
Moves the image left or right.
Moves the image up or Down.
Image Setup
Automatic
Manual
Automatically optimizes the
image.
Manually optimizes the image.
See “Manual image setup” on
page 3-3
● Clock
● Phase
●
Save
Image Properties
Color
Adjusts intensity of red, green,
and blue.
Preset mode
● Neutral
● sRGB
● Reddish
● Bluish
Custom
● Red: Increases or decreases
the saturation of ‘red’ in the
image.
● Green: Increases or
decreases the saturation of
‘green’ in the image.
● Blue: Increases or
decreases the saturation of
‘blue’ in the image.
● Save: Saves the custom
colour choices.
Image Properties Input Signal Analog
HDMI
Select Analog Signal
Select HDMI Signal
Image Properties Scaling ●
Full Screen
● Original AR
Image Properties Novo Vision
Screen Prioritization
● Text Mode
● Web pic Mode
● Video Mode
●
Low Blue Light
2-5 D22-17 Flat Panel Monitor User’s Guide
Table 2-2. OSD functions
OSD Icon on Main
Menu Submenu Description
Options
Information
Shows resolution, refresh rate, and product details.
Note: This screen does not allow any changes to the settings.
This section lists the languages supported by your monitor.
Options
Language Note:
The language chosen only affects the language of the OSD. It has
no effect on any software running on the computer.
Options
Menu Position
Default
Custom
Menu position adjusts menu location on the screen.
Returns the menu position to the default settings.
● Horizontal: Changes the horizontal position of the OSD
● Vertical: Changes the vertical position of the OSD.
Options Reset
● Cancel
● Reset
Resets monitor to the original factory settings.
Controls button and menu settings for accessibility preferences.
Options
Accessibility
Button repeat rate:
Select or to change.
● Off
● Default
● Slow
Menu time out: Sets the length of time the OSD will remain active after
the last time a button is pressed.
*Low Blue Light Mode is reducing the blue light content.
*The use of Extreme Mode (response time) may result in reduced display quality when fast moving video
graphics are displayed.
Users should check Extreme Mode (response time) to verify if it is compatible with any applications they would
like to use it with.
Chapter 2. Adjusting and Using your monitor 2-6
Selecting a supported display mode
The display mode the monitor uses is controlled by the computer. Therefore, refer to your
computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes. This is
normal and the image can be readjusted using automatic image setup and the image
controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat
Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to re-attach
the CRT monitor temporarily until you have re-configured the system; preferably to
1920x1080 at 60Hz, which is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Table 2-3.Factory set display modes
Addressability
Refresh rate
PAL
50Hz
640x350
70Hz
640x480
60Hz, 72Hz,75Hz
700x570
50Hz
720x400
70Hz
800x600
60Hz,72Hz,75Hz
832x624
75Hz
1024x768
60Hz,70Hz,75Hz
1152x864
75Hz
1280x1024
60Hz,70Hz,75Hz
1366x768
60Hz
1440x1080
60Hz,70Hz
1920x1080
60Hz
Understanding power management
Power management is invoked when the computer recognizes that you have not using
your mouse or keyboard for a user-definable period. There are several states as described in
the table below.
For optimal performance, switch off your monitor at the end of each working day, or
whenever you expect to leave it unused for long periods during the day.
Table2-4.Power indicator
State Power Indicator Screen Restoring Operation Compliance
On Steady White Normal
Standby/
Suspend
Steady amber Blank
Press a key or move the
mouse.
There may be a slight delay
reappears.
Note: Standby also occurs
if there is no image output to
the monitor.
ENERGY
STAR
Off Off Off Press power key to switch on
There may be a slight delay
before the image reappears.
ENERGY
STAR
2-7 D22-17 Flat Panel Monitor User’s Guide
Caring for your monitor
Be sure to turn off the power before you perform any maintenance on the monitor.
Do not:
Apply water or liquid directly to your monitor.
Use solvents or abrasives.
Use flammable cleaning materials to clean your monitor or any other electrical
equipment.
Touch the screen area of your monitor with sharp or abrasive items. This type
of contact may cause permanent damage to your screen.
Use any cleaner which contains an anti-static solution or similar additives. This
may harm the coating of the screen area.
Do:
Lightly dampen a soft cloth with water and use this to gently wipe the covers
and the screen.
Remove grease or finger marks with a damp cloth and a little mild detergent.
Detaching the monitor stand
After placing the monitor face down on a clean surface or soft cloth, Press the release button
to remove the stand and base from the monitor.
Wall Mounting (Optional)
Refer to the instructions that come with the VESA compatible base mounting kit.
1. Place the monitor face down on a non-abrasive surface on stable flat table.
2. Remove the stand.
3. Attach the mounting bracket from the wall mounting kit to the monitor.
4. Mount the monitor on the wall by following the instructions that come with the
base mounting kit.
NOTE: For use only with UL and GS Listed Wall Mount Bracket with minimum
weight/load bearing capacity of 6.00 kg. In order to fulfil TCO Certification for this wall
mounting option, shielded power cable is mandatory to be used.
Chapter 2. Adjusting and Using your monitor 2-8
Chapter 3 Reference information
This section contains monitor specifications, instructions to manually install the monitor driver,
troubleshooting information, and service information.
Monitor specifications
Table 3-1. Monitor specifications
Dimensions Height
Depth
Width
399.03mm (15.71 in.)
190.00mm (7.48 in.)
509.20 mm (20.05 in.)
Stand Tilt range Range: -5°/+22°
VESA mount
Supported
(UL&GS approved)
100 mm (3.94 in.)
Image
Viewable image size
Maximum height
Maximum width
Pixel pitch
546.1 mm (21.5 in.)
268.11 mm (10.56 in.)
476.64 mm (18.77 in.)
0.2482mm(H)x0.2482 mm (V)
Power input Supply voltage
Max supply current
100-240 VAC, 60/50 Hz
1.5 A
Power consumption
Note: Power consumption
figures are for the monitor and
the power supply combined.
Max Consumption
(Without USB hub)
Typical Consumption
Standby/Suspend
Off
<16W
<12W
<0.3W
<0.3W
Video input (Analog)
Input signal
Horizontal addressability
Vertical addressability
Clock frequency
Analog Direct Drive, 75 ohm
0.7 V
1920 pixels (max)
1080 lines (max)
210 MHz
Video input (Digital) Input signal
Horizontal addressability
Vertical addressability
Clock frequency
HDMI
1920 pixels (max)
1080 lines (max)
225 MHz
Communications VESA DDC CI
Altitude Test Operation 16400 ft.
Supported Display Modes
(VESA Standard modes
between noted ranges)
Horizontal frequency
Vertical frequency
Native Resolution
30 kHz – 81 kHz
50 Hz – 75 Hz
1920 x 1080 at 60 Hz
Temperature
Operating
Storage
Shipping
0° to 50°C (32°F to 122° F)
-20° to 60°C (-4°F to 140° F)
-20° to 60°C (-4° F to 140° F)
Humidity Operating
Storage
Shipping
8% to 80%
5% to 95%
5% to 95%
3-1 D22-17 Flat Panel Monitor User’s Guide
Troubleshooting
If you have a problem setting up or using your monitor, you might be able to solve it
yourself. Before calling your dealer or Lenovo, try the suggested actions that are
appropriate to your problem.
Table3-2.Troubleshooting
Problem Possible cause Suggested action Reference
The words” Out
of Range” are
shown on the
screen, and the
power indicator is
flashing green.
The system is set
to a display
mode which is
not supported by
the monitor.
● If you are replacing an old
monitor, reconnect it and
adjust the display mode to
within the specified range
for your new monitor.
● If using a Windows
system, restart the system
in safe mode, then select a
supported display mode
for your computer.
● If these options do not
work, contact the
Customer Support Centre.
“Selecting a supported
display mode” on page
2-7
The image quality
is unacceptable.
The video signal
cable is not
connected with
the monitor or
system
completely.
Be sure the signal cable is
firmly plugged into the
system and monitor.
“Connecting and turning
on your monitor” on
page 1-3
The color
settings may be
incorrect.
Select another colour setting
from the OSD menu.
“Adjusting your monitor
image” on page 2-4
The automatic
image setup
function was not
performed.
Perform automatic image
setup.
“Adjusting your monitor
image” on page 2-4
The power
indicator is not lit
and there is no
image.
● The monitor’s
power switch
is not switched
on.
● The power
cord is loose or
disconnected.
● There is no
power at the
outlet.
● Be sure the power cord is
connected properly.
● Be sure the outlet has
power.
● Power on the monitor.
● Try using another power
cord.
● Try using another
electrical outlet.
“Connecting and turning
on your monitor” on
page 1-3
Chapter 3 Reference information 3-2
Table3-2.Troubleshooting (continued)
Problem Possible cause Suggested action Reference
Screen is blank
and power
indicator is
steady amber
or flashing
green
The monitor is in
Standby/Suspend
mode
● Press any key on the
keyboard or move the
mouse to restore
operation.
● Check the Power options
settings on your
computer.
“Understanding power
management” on page
2-7
The power
indicator is
green, but
there is no
image.
The video signal
cable is loose or
disconnected from
the system or
monitor.
Be sure the video cable is
connected with the system
properly.
“Connecting and turning
on your monitor” on
page 1-3
The monitor
brightness and
contrast are at the
lowest setting.
Adjust the brightness and
contrast setting on the OSD
menu.
“Adjusting your monitor
image” on page 2-4
One or more
of the pixels
appear
discoloured
This is a
characteristic of the
LCD technology
and is not an LCD
defect.
If there are more than five
pixels missing, contact the
Customer Support Centre.
Appendix A, “Service
and Support,” on page
A-1
● Fuzzy lines
in text or a
blurry image.
● Horizontal
or vertical
lines through
the image.
● Image setup has
not been
optimized
● Your system
Display
Properties setting
have not been
optimized.
Adjust the resolution
settings on your system to
match the native resolution
for this monitor: 1920x1080
at 60 Hz.
“Adjusting your monitor
image” on page 2-4
“Manual image setup” on
page 3-3
Perform automatic image
setup. If automatic image
setup does not help,
perform manual image
setup.
“Selecting a supported
display mode” on page
2-7
When working in the native
resolution, you may find
additional improvements by
adjusting the Dots Per Inch
(DPI) setting on your
system.
See the Advanced section
of your system’s display
properties.
The image is
not acceptable
when
switching to
dual mode
It has not set the
optimum
resolution for each
mode
● Use ThinkVision Duo
software to optimize the
dual screen operation
● Adjust graphic card
resolution manually
“Using the direct access
controls” on page 2-4
Manual image setup
If automatic image setup does not establish the image that you prefer, perform
manual image setup.
Note: Have your monitor powered on for about 15 minutes, until the monitor warms up.
3-3 D22-17 Flat Panel Monitor User’s Guide
1. Press at the bottom of the monitor to open the OSD menu.
2. Use or to select and press to access.
3. Use or to select Clock and Phase adjustment.
● Clock (pixel frequency) adjusts the number of pixels scanned by one
Horizontal sweep. If the frequency is not correct, the screen shows vertical
Stripes and the picture does not have the correct width.
● Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the picture has horizontal disturbances in light picture.
4. When the image no longer looks distorted, save the Clock and Phase adjustments.
5. Press to leave the OSD menu.
Manually installing the monitor driver
Below are steps for manually installing the monitor driver in Microsoft Windows 7,
Microsoft Windows 10.
Installing the monitor driver in Windows 7
To install the device driver in Microsoft® Windows 10, do the following:
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then turn on the computer. Allow your computer to boot into
Windows 7 operating system.
4. From the Lenovo website http://support.lenovo.com/docs/d22_17, find the
corresponding monitor driver and download it to a PC to which this monitor is
connected (such as a desktop).
5. Open the Display Properties window by right-clicking Start, Control Panel, Hardware and
Sound icon, and then click the Display icon.
6. Click the Change the display settings tab.
7. Click the Advanced Settings icon.
8. Click the Monitor tab.
9. Click the Properties button.
10. Click the Driver tab.
11. Click Update Driver, then click Browse the computer to find the driver program.
12. Select Pick from the list of device driver program on the computer.
13. Click the Have Disk button. By clicking the Browse button, browse and point to the
following path: X:\Monitor Drivers
(Where X indicates "the folder in which the downloaded driver is located" (such as a
desktop)
14. Select the “D22-17.inf” file and click the Open button. Click the OK button.
15. Select Lenovo D22-17 and click Next.
16. After the installation is complete, delete all downloaded files and close all windows.
17. Restart the system. The system will automatically select the maximum refresh rate
and corresponding Colour Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display
quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or
640 x 480 at refresh rate of 60 Hz.
Chapter 3 Reference information 3-4
Installing the monitor driver in Windows 10
To use the Plug and Play feature in Microsoft Windows 10, do the following:
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then turn on the computer. Allow your computer to
boot into Windows 10 operating system.
4. From the Lenovo website http://support.lenovo.com/docs/d22_17, find the
corresponding monitor driver and download it to a PC to which this monitor is
connected (such as a desktop).
5. On the Desktop, move mouse to bottom-left corner of screen, right-click
choose Control Panel, then double click the icon of Hardware and Sound, and
then click Display.
6. Click the Change the display settings tab.
7. Click the Advanced Settings button.
8. Click the Monitor tab.
9. Click the Properties button.
10. Click the Driver tab.
11. Click Update Driver, then click Browse the computer to find the driver program.
12. Select “Let me pick from a list of device drivers on my computer”.
13. Click the Have Disk button. By clicking the Browse button, browse and
point to the following path:
X:\Monitor Drivers\Windows 10
(Where X indicates "the folder in which the downloaded driver is located"
(such as a desktop)
14. Select the “D22-17.inf” file and click the Open button. Click the OK button.
15. In the new window, select Lenovo D22-17 and click Next.
16. After the installation is complete, delete all downloaded files and close all
windows.
17. Restart the system. The system will automatically select the maximum
refresh rate and corresponding Color Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display
quality. Lenovo recommends using either 1920x1080 at a refresh rate of 60 Hz, or 640 x
480 at a refresh rate of 60 Hz.
3-5 D22-17 Flat Panel Monitor User’s Guide
Service information
Customer responsibilities
The warranty does not apply to a product which has been damaged due to accident,
misuse, abuse, improper installation, usage not in accordance with product specifications
and instructions, natural or personal disaster, or unauthorized alterations, repairs or
modifications.
The following are examples of misuse or abuse and not covered by warranty:
● Images burned on to the screen of a CRT monitor. Burned image is preventable by
utilizing a moving screen saver or power management.
● Physical damage to covers, bezel, base and cables.
● Scratches or punctures on monitor screens.
Getting further help
If you still can’t solve your problem, please contact the Customer Support Center. For
more information on contacting the Customer Support Center, please see Appendix A,
“Service and Support,” on page A-1.
Service parts
The following parts are for use by Lenovo service, or Lenovo authorized dealers to support
the customer warranty. Parts are for service use only. The table below shows information for
model 61FF-KAR6-WW.
Table 3-3. List of service parts
FRU (Field
Replaceable Unit)
Part number
Description colour Machine Type
Model (MTM)
5D10Y86273
D22-17(D18215FD0)-21.5"
FRU Monitor Raven Black 61FF-KAR6-WW
01YY013 (pick up
from T22v-10)
D22-17 Analog cable(1.8m,
RoHS) Raven Black 61FF-KAR6-WW
01YY016 (pick up
from T22v-10)
D22-17 HDMI
cable (1.8m, RoHS) Raven Black 61FF-KAR6-WW
01YY100
（
(pick up
from D22-10)
D22-17 - FRU Base
and Stand Raven Black 61FF-KAR6-WW
Chapter 3 Reference information 3-6
Appendix A Service and Support
The following information describes the technical support that is available for your product, during
the warranty period or throughout the life of your product. Refer to the Lenovo Limited Warranty
for a full explanation of Lenovo warranty terms.
Registering your option
Register to receive product service and support updates, as well as free and discounted computer
accessories and content. Go to: http://www.lenovo.com/register
Online technical support
Online technical support is available during the lifetime of a product at:
http://www.lenovo.com/support
Product replacement assistance or exchange of defective components also is available during the
warranty period. In addition, if your option is installed in a Lenovo computer, you might be entitled
to service at your location. A Lenovo technical support representative can help you determine the
best alternative.
Telephone technical support
Installation and configuration support through the Customer Support Center will be available until
90 days after the option has been withdrawn from marketing. After that time, the support is
cancelled, or made available for a fee, at Lenovo’s discretion. Additional support is also available for
a nominal fee.
Before contacting a Lenovo technical support representative, please have the following information
available: option name and number, proof of purchase, computer manufacturer, model, serial
number and manual, the exact wording of any error message, description of the problem, and the
hardware and software configuration information for your system.
Your technical support representative might want to walk you through the problem while you are at
your computer during the call.
Telephone numbers are subject to change without notice. The most up-to-date telephone list for
Lenovo Support is always available at:
http://www.lenovo.com/support
Country or Region Telephone Number
Argentina
0800-666-0011 (Spanish, English)
Australia
1-800-041-267 (English )
Austria
0810-100-654 (local phone) (German)
Belgium
Warrant service and support: 02-339-36-11 (Dutch, French)
Bolivia
0800-10-0189 ( Spanish)
Brazil
Calls made from within the Sao Paulo region: 11-3889-8986
Calls made from outside the Sao Paulo region: 0800-701-4815
(Portuguese)
Brunei Darussalam
800-1111 (English)
Canada
1-800-565-3344 (English, French)
Chile
800-361-213(Spanish )
China
Technical Support Line: 400-100-6000 (Mandarin)
China
(Hong Kong S.A.R.)
(852) 3516-8977
(Cantonese, English, Mandarin)
China
(Macau S.A.R.)
0800-807 / (852) 3071-3559
(Cantonese, English, Mandarin)
Colombia
1-800-912-3021 (Spanish)
Costa Rica
0-800-011-1029( Spanish )
Croatia
385-1-3033-120(Croatian)
Cyprus
800-92537(Greek)
Czech Republic
800-353-637(Czech)
Denmark
Warranty service and support: 7010-5150 (Danish)
A-1 D22-17 Flat Panel Monitor User’s Guide
Country or Region Telephone Number
Dominican Republic
1-866-434-2080(Spanish )
Ecuador
1-800-426911 (OPCION 4) (Spanish )
Egypt
Primary: 0800-0000-850
Secondary:0800-0000-744
(Arabic, English)
El Salvador
800-6264 (Spanish)
Estonia
372-66-0-800
(Estonian, Russian, English)
Finland
Warranty service and support: +358-800-1-4260(Finnish)
France
Warranty service and support (hardware): 0810-631-213(French)
Germany Warranty service and support: 0800-500-4618 (toll-free)(German)
Greece Lenovo Business Partner (Greek)
Guatemala Dial 999-9190, wait for operator, and request to reach 877-404-9661 (Spanish)
Honduras
Dial 800-0123(Spanish)
Hungary
+36-13-825-716
(English, Hungarian)
India
Primary: 1800-419-4666 (Tata)
Secondary: 1800-3000-8465 (Reliance)
Email: commercialts@lenovo.com
(English and Hindi)
Indonesia
1-803-442-425
62 213-002-1090 (Standard Charges Apply)
(English, Bahasa Indonesia)
Ireland Warranty service and support: 01-881-1444 (English)
Israel
Givat Shmuel Service and Center: +972-3-531-3900
(Hebrew, English)
Italy Warranty service and support: +39-800-820094 (Italian)
Japan
0120-000-817
(Japanese, English)
Kazakhstan 77-273-231-427(Standard charges Apply) (Russian , English)
Korea
080-513-0880 (Collect Call)
02-3483-2829 (Toll Call) (Korean)
Latvia 371-6707-360(Latvian, Russian, English)
Lithuania 370 5278 6602(Italian, Russian, English )
Luxembourg
ThinkServer and ThinkStation: 352-360-385-343 ThinkCentre and
ThinkPad: 352-360-385-222 (French)
Malaysia
1-800-88-0013
03-7724-8023 (Standard Charges Apply) (English)
Malta
356-21-445-566(English, Italian, Maltese Arabic)
Mexico 001-866-434-2080(Spanish)
Netherlands 020-513-3939 (Dutch)
New Zealand 0508-770-506 (English )
Nicaragua 001-800-220-2282 (Spanish)
Norway 8152-1550(Norwegian)
Panama
Lenovo Customer Support Center: 001-866-434(Toll-Free)(Spanish)
Peru 0-800-50-866 (OPCION 2) (Spanish)
Philippines
1-800-8908-6454 (GLOBE subscribers)
1-800-1441-0719 (PLDT subscribers) (Tagalog, English)
Poland
Laptops and tablets branded with logo Think: 48-22-273-9777
ThinkStation and ThinkServer: 48-22-878-6999
(Polish, English )
A-2 D22-17 Flat Panel Monitor User’s Guide
Country or Region Telephone Number
Portugal
808-225-115 (Standard Charges Apply) (Portuguese)
Romania
4-021-224-4015(Romanian)
Russia
+7-499-705-6204
+7-495-240-8558
(Standard Charges Apply)(Russian)
Singapore
1-800-415-5529
6818-5315 (Standard Charges Apply)
(English, Mandarin, Bahasa Malaysia)
Slovakia ThinkStation and ThinkServer: 421-2-4954-5555
Slovenia 386-1-2005-60 (Slovenian)
Spain 34-917-147-833(Spanish)
Sri Lanka +9477-7357-123 (Sumathi Information systems) (English)
Sweden Warranty service and support: 077-117-1040 (Swedish)
Switzerland Warranty service and support: 0800-55-54-54 (German, French,
Italian)
Taiwan 0800-000-702 (Mandarin)
Thailand
001-800-4415-734
(+662) 787-3067 (Standard Charges Apply)(Thai, English)
Turkey 444-04-26 (Turkish)
United Kingdom
Standard warranty support: 03705-500-900 ( local rate) Standard warranty
support: 08705-500-900(English)
United States 1-800-426-7378 (English)
Uruguay 000-411-005-6649 (Spanish)
Venezuela 0-800-100-2011 (Spanish)
Vietnam
120-11072 (Toll Free)
84-8-4458-1042 (Standard Charges Apply) (Vietnamese, English)
A-3 D22-17 Flat Panel Monitor User’s Guide
Appendix B Notices
Lenovo may not offer the products, services, or features discussed in this document in all
countries. Consult your local Lenovo representative for information on the products and
services currently available in your area. Any reference to a Lenovo product, program, or
service is not intended to state or imply that only that Lenovo product, program, or
service may be used. Any functionally equivalent product, program, or service that does
not infringe any Lenovo intellectual property right may be used instead.
However, it is the user 's responsibility to evaluate and verify the operation of any other
product, program, or service.
Lenovo may have patents or pending patent applications covering subject matter
described in this document. The furnishing of this document does not give you any
license to these patents. You can send license inquiries, in writing, to:
Lenovo (United States), Inc.
1009 Think Place - Building One Morrisville, NC 27560
U.S.A.
Attention: Lenovo Director of Licensing
LENOVO PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of
express or implied warranties in certain transactions, therefore,this statement may not
apply to you.
This information could include technical inaccuracies or typographical errors. Changes
are periodically made to the information herein; these changes will be incorporated in
new editions of the publication. Lenovo may make improvements and/or changes in the
product(s) and/or the program(s) described in this publication at any time without
notice.
The products described in this document are not intended for use in implantation or
other life support applications where malfunction may result in injury or death to
persons. The information contained in this document does not affect or change Lenovo
product specifications or warranties. Nothing in this document shall operate as an
express or implied license or indemnity under the intellectual property rights of Lenovo
or third parties. All information contained in this document was obtained in specific
environments and is presented as an illustration. The result obtained in other operating
environments may vary.
Lenovo may use or distribute any of the information you supply in any way it believes
appropriate without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for convenience
only and do not in any manner serve as an endorsement of those Web sites. The materials
at those Web sites are not part of the materials for this Lenovo product, and use of those
Web sites is at your own risk.
Any performance data contained herein was determined in a controlled environment.
Therefore, the result obtained in other operating environments may vary significantly.
Some measurements may have been made on development-level systems and there is no
guarantee that these measurements will be the same on generally available systems.
Furthermore, some measurements may have been estimated through extrapolation.
Actual results may vary. Users of this document should verify the applicable data for
their specific environment.
Recycling information
Lenovo encourages owners of information technology (IT) equipment to responsibly
recycle their equipment when it is no longer needed. Lenovo offers a variety of programs
and services to assist equipment owners in recycling their IT products. For information
on recycling Lenovo products, go to: www.lenovo.com/recycling
Notices B-1
Collecting and recycling a disused Lenovo computer or monitor
If you are a company employee and need to dispose of a Lenovo computer or monitor
that is the property of the company, you must do so in accordance with the Law for
Promotion of Effective Utilization of Resources. Computers and monitors are
categorized as industrial waste and should be properly disposed of by an industrial
waste disposal contractor certified by a local government. In accordance with the Law
for Promotion of Effective Utilization of Resources, Lenovo Japan provides, through its
PC Collecting and Recycling Services, for the collecting, reuse, and recycling of disused
computers and monitors. For details, visit the Lenovo Web site at
www.ibm.com/jp/pc/service/recycle/pcrecycle/.Pursuant to the Law for Promotion
of Effective Utilization of Resources, the collecting and recycling of home-used
computers and monitors by the manufacturer was begun in October 1, 2003. This
service is provided free of charge for home-used computers sold after October 1, 2003.
For details, visit the Lenovo Web site at:
www.ibm.com/jp/pc/service/recycle/personal/.
Disposing of Lenovo computer components
Some Lenovo computer products sold in Japan may have components that contain heavy
metals or other environmental sensitive substances. To properly dispose of disused
components, such as a printed circuit board or drive, use the methods described above for
collecting and recycling a disused computer or monitor.
Trademarks
The following terms are trademarks of Lenovo in the United States, other countries, or both:
Lenovo
The Lenovo logo
ThinkCenter
ThinkPad
ThinkVision
Microsoft, Windows, and Windows NT are trademarks of the Microsoft group of
companies.
Other company, product, or service names may be trademarks or service marks of others.
Power cords and power adapters
Use only the power cords and power adapters supplied by the product manufacturer. Do
not use the ac power cord for other devices.
B-2 D22-17 Flat Panel Monitor User’s Guide