Lenovo P32u-10 User Manual
Displayed below is the user manual for P32u-10 by Lenovo which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
ThinkVision P32u-10
User Guide
Machine Types: 61C1
Product numbers
61C1-RAR2-WW
First Edition (May 2018)
© Copyright Lenovo 2018.
LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to
governmental entities as commercial items as dened by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction
and disclosure.
LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are delivered pursuant
a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in
Contract No. GS-35F-05925.
ii
Contents
Safety information .......................................................................................................................................... iii
General Safety guidelines ........................................................................................................................................................................ iii
Chapter 1. Getting started............................................................................................................................ 1-1
Shipping contents ................................................................................................................................................................................... 1-1
Notice for use ......................................................................................................................................................................................... 1-1
Product overview ................................................................................................................................................................................... 1-2
Types of adjustments ....................................................................................................................................................................... 1-2
Tilt .................................................................................................................................................................................................... 1-2
Swivel .............................................................................................................................................................................................. 1-2
Height Adjustment ........................................................................................................................................................................... 1-3
Monitor Pivot ................................................................................................................................................................................... 1-3
Monitor controls .............................................................................................................................................................................. 1-4
Cable lock slot ................................................................................................................................................................................. 1-4
Setting up your monitor ......................................................................................................................................................................... 1-5
Connecting and turning on your monitor ........................................................................................................................................ 1-5
Registering your option ........................................................................................................................................................................ 1-10
Chapter 2. Adjusting and using your monitor............................................................................................ 2-1
Comfort and accessibility ...................................................................................................................................................................... 2-1
Arranging your work area ................................................................................................................................................................ 2-1
Positioning your monitor ................................................................................................................................................................. 2-1
Quick tips for healthy work habits .................................................................................................................................................. 2-2
Accessibility information ................................................................................................................................................................ 2-2
Adjusting your monitor image ............................................................................................................................................................... 2-3
Using the direct access controls ....................................................................................................................................................... 2-3
Using the On-Screen Display (OSD) controls ................................................................................................................................. 2-4
Selecting a supported display mode ................................................................................................................................................ 2-7
Understanding power management ........................................................................................................................................................ 2-8
Caring for your monitor ......................................................................................................................................................................... 2-9
Detaching the monitor base and stand ................................................................................................................................................... 2-9
Wall Mounting (Optional) ...................................................................................................................................................................... 2-9
Chapter 3. Reference information ............................................................................................................... 3-1
Monitor specications ............................................................................................................................................................................ 3-1
Troubleshooting ..................................................................................................................................................................................... 3-3
Manually installing the monitor driver ............................................................................................................................................ 3-5
Installing the monitor driver in Windows 7 ................................................................................................................................ 3-5
Installing the monitor driver in Windows 10 .............................................................................................................................. 3-6
Getting further help .................................................................................................................................................................... 3-6
Service information ................................................................................................................................................................................ 3-7
Customer responsibilities ................................................................................................................................................................ 3-7
Service parts .................................................................................................................................................................................... 3-7
Appendix A. Service and Support ...............................................................................................................A-1
Registering your option ......................................................................................................................................................................... A-1
Online technical support ....................................................................................................................................................................... A-1
Telephone technical support.................................................................................................................................................................. A-1
Appendix B. Notices ...................................................................................................................................... B-1
Recycling information ...........................................................................................................................................................................B-2
Trademarks .............................................................................................................................................................................................B-2
Power cords and power adapters ............................................................................................................................................................B-3
Contents
iii
Safety information
General Safety guidelines
For tips to help you use your computer safely, go to:
http://www.lenovo.com/safety
Before installing this product, read the Safety Information.
Chapter 1. 1-1
Chapter 1. Getting started
1
This User’s Guide contains detailed information on the your Flat Panel Monitor. For a quick
overview, please see the Setup Poster that was shipped with your monitor.
Shipping contents
The product package should include the following items:
yFlat Panel Monitor
yInformation Flyer
yStand
yBase
yHDMI Cable
yDP Cable
yThunderbolt™ 3 Cable
yUSB3.0 A-B Cable
yPower Cord
Thunderbolt™
DP
USB3.0 A-B
HDMI
Note: To achieve 4K daisy chain at 60Hz on P32u-10 monitor, a 40G Thunderbolt™ 3 cable is
require.
Notice for use
To set up your monitor, please see the illustrations below.
Note: Do not touch the monitor within the screen area. The screen area is glass and can be
damaged by rough handling or excessive pressure.
1. Carefully lay the monitor on a at surface.
2. Put the stand and base to the monitor.
Note: To attach a VESA mount, please see “Wall Mounting (Optional)”on page 2-10.
Chapter 1. 1-2
Product overview
This section will provide information on adjusting monitor positions, setting user controls, and
using the cable lock slot.
Types of adjustments
Tilt
Please see the illustration below for an example of the tilt range.
Swivel
With the built-in pedestal, you can tilt and swivel the monitor for the most comfortable viewing
angle.
Chapter 1. 1-3
Height Adjustment
For height adjustment, user needs to press down or lift up the monitor.
110mm
Monitor Pivot
- Adjust the screen position before rotating the monitor screen. (Make sure that the monitor
screen ascent to its highest point, and it inclines backward at 30°.)
- then rotate clockwise /counterclockwise until the monitor stops at 90°.
Chapter 1. 1-4
Monitor controls
Your monitor has controls on the front which are used to adjust the display.
For information on how to use these controls, please see “Adjusting your monitor image”on
page 2-3.
Cable lock slot
Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the
lower position).
Chapter 1. 1-5
Setting up your monitor
This section provides information on how to set up your monitor.
Connecting and turning on your monitor
Note: Be sure to read the Safety information located on page iii before carrying out this
procedure.
1. Power off your computer and all attached devices, and unplug the computer power cord.
2. Connect the cables according to below icon indication.
Thunderbolt™ 3
Input
Thunderbolt™
3
Output
3. For computer in HDMI connecting.
Chapter 1. 1-6
4. For computer in DisplayPort connecting.
DP
DP
5. For computer in Thunderbolt™ connecting.
Note 1: P32u-10 monitor supports Thunderbolt™ 3
Note 2:
is Thunderbolt™ 3 input port, is Thunderbolt™ 3 output port.
Input port supports PD Max 45W, 5V/3A, 9V/3A, 15V/3A, 20V/2.25A.
Output port supports PD Max 15W, 5V/3A.
Chapter 1. 1-7
6. For computer in USB Type-A connecting..
7. Connect the speaker’s audio cable and audio jack of monitor to transfer audio source from
DP, Thunderbolt™, HDMI.
Note: The audio output in DP, Thunderbolt™, HDMI modes.
Chapter 1. 1-8
8. Connect one end of the USB cable to the USB downstream terminal of the monitor, and
connect the other end of the USB cable to an appropriate USB port on your device.
Note: The USB downstream port does not provide power while the monitor switch is off.
Chapter 1. 1-9
9. Insert the power cord into the monitor, then plug the monitor power cord and the computer
cord into grounded electrical outlets.
Note: A certied power supply cord has to be used with this equipment. The relevant
national installation and or equipment regulations shall be considered. A certied power
supply cord not lighter than ordinary polyvinyl chloride exible cord according to IEC
60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G 0.75mm2 ) shall be used.
Alternative a exible cord be of synthetic rubber according to IEC 60245 (designation
H05RR-F 3G 0.75mm2 ) shall be used.
10. Connect the cables with cable clip.
12
Chapter 1. 1-10
11. Power on the monitor and the computer.
12. When you install the monitor driver, download the driver that corresponds to your monitor
model from the Lenovo website http://support.lenovo.com/docs/P32u_10. Refer to the
““Manually installing the monitor driver”on page 3-5” section to install the driver.
Registering your option
Thank you for purchasing this Lenovo™ product. Please take a few moments to register your
Product and provide us with information that will help Lenovo to better serve you in the future.
Your feedback is valuable to us in developing product and services that are important to you,
as well as in developing better ways to communicate with you. Register your option on the
following Web site: http://www.lenovo.com/register
Lenovo will send you information and updates on your registered product unless you indicate
on the Web site questionnaire that you do not want to receive further information.
Chapter 2. 2-1
Chapter 2. Adjusting and using your monitor
2
This section will give you information on adjusting and using your monitor.
Comfort and accessibility
Good ergonomic practice is important to get the most from your personal computer and to
avoid discomfort. Arrange your workplace and the equipment you use to suit your individual
needs and the kind of work that you perform. In addition, use healthy work habits to maximize
your performance and comfort while using your computer. For more detailed information
on any of these topics, visit the Healthy Computing Web site at: http://www.lenovo.com/
healthycomputing/.
Arranging your work area
Use a work surface of appropriate height and available working area to allow you to work in
comfort.
Organize your work area to match the way you use materials and equipment. Keep your work
area clean and clear for the materials that you typically use and place the items that you use
most frequently, such as the computer mouse or telephone, within the easiest reach.
Equipment layout and setup play a large role in your working posture. The following topics
describe how to optimize equipment setup to achieve and maintain good working posture.
Positioning your monitor
Position and adjust your computer monitor for comfortable viewing by considering the
following items:
yRecommended viewing distance between the eye and the monitor screen is l.5x the
diagonal of the screen. Solutions in meeting this required distance in cramped ofce
situations include pulling desk away from wall or divider to make room for monitor,
using at panel or compact displays placing the monitor in the desk corner, or placing the
keyboard in an adjustable drawer to create a deeper working surface.
yMonitor height: Position the monitor so your head and neck are in a comfortable and
neutral (vertical, or upright) position. If your monitor does not have height adjustments, you
might have to place books or other sturdy objects under the base of the monitor to achieve
the desired height. A general guideline is to position the monitor such that the top of the
screen is at or slightly below your eye-height when you are comfortably seated. However,
be sure to optimize your monitor height so the line of site between your eyes and the center
the monitor suits your preferences for visual distance and comfortable viewing when your
eye muscles are in a relaxed state.
yTilt: Adjust the tilt of your monitor to optimize the appearance of the screen content and to
accommodate your preferred head and neck posture.
yGeneral location: Position your monitor to avoid glare or reections on the screen from
overhead lighting or nearby windows.
The following are some other tips for comfortable viewing of your monitor:
Chapter 2. 2-2
yUse adequate lighting for the type of work you are performing.
yUse the monitor brightness, contrast controls, if equipped to optimize the image on your
screen to meet your visual preferences.
yKeep your monitor screen clean so you can focus on the screen’s contents.
Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to
periodically look away from your monitor screen and focus on a far object to allow your eye
muscles to relax. If you have questions on eye fatigue or visual discomfort, consult a vision care
specialist for advice.
Quick tips for healthy work habits
The following information is a summary of some important factors to consider to help you
remain comfortable and productive while you use your computer.
yGood posture starts with equipment setup: The layout of your work area and the setup
of your computer equipment have a large effect on your posture while using your computer.
Be sure to optimize the position and orientation of your equipment by following the tips
outlined in “Arranging your work area”on page 2-1 so you can maintain a comfortable
and productive posture. Also, be sure to use the adjustment capabilities of your computer
components and ofce furniture to best suit your preferences now and as your preferences
change over time.
yMinor changes in posture can help avoid discomfort: The longer you sit and work with
your computer, the more important it is to observe your working posture. Avoid assuming
any one posture for an extended period of time. Periodically make minor modications in
your posture to help deter any discomforts that might arise. Make use of any adjustments
that your ofce furniture or equipment provide to accommodate changes in posture.
yShort, periodic breaks help ensure healthy computing: Because computing is
primarily a static activity, it is particularly important to take short breaks from your work.
Periodically, stand up from your work area, stretch, walk for a drink of water, or otherwise
take a short break from using your computer. A short break from work gives your body a
welcome change in posture and helps to ensure you remain comfortable and productive
while you do work.
Accessibility information
Lenovo is committed to providing greater access to information and technology to people
with disabilities. With assistive technologies, users can access information in the way most
appropriate to their disability. Some of these technologies are already provided in your
operating system; others can be purchased through vendors or accessed at:
https://lenovo.ssbbartgroup.com/lenovo/request_vpat.php
Chapter 2. 2-3
Adjusting your monitor image
This section describes the control features to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Table 2-1. Direct access controls
Icon Control Description
1
One Key Switch
Select “1” is Thunderbolt™ port USB-C
function, select “2” is HDMI1/HDMI2/DP port
USB-B function
Exit Exit from menu and return before menu
DDC-CI Press and hold for 10 seconds to enable or
disable the DDC-CI function
2
Input Change Switches the video input source
HDMI2.0/
HDMI1.4 Switch
For HDMI1 Port, press and hold for 5 seconds
will switch from HDMI2.0 to HDMI1.4
Increase For increasing the value on adjustment bar/tune
In press to move to next item
Up Right browsing key
3
Brightness Direct access to Brightness adjustment
Down Down key function and down circle
DP1.2/DP1.1
Switch
For DP port, press and hold for 5 seconds will
switch from DP1.2 to DP1.1
4
Menu
To access OSD menu
Press to conrm selection
Press and hold for 10 seconds will lock menu/
unlock menu
Enter
Press to enter next level on main menu/
sub menu status or enter previous level on
adjustment bar
*Note:
One Key Switch: Press and select “1” to be Thunderbolt™ port USB-C function.
Press and select “2” to be HDMI1/HDMI2/DP port USB-B function.
·1 2·
USB Type-BThunderbolt
Chapter 2. 2-4
Using the On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
Input: DisplayPort Resolution: 2560 x 1440
30Contrast
50Volume
Volume: 60Color Mode: sRGB
P32u
Advanced Setup
Options
OSD Setting
Exit
Screen Controls Brightness85100
70
To use the controls:
1. Press to open the main OSD menu.
2. Use or to move among the icons. Select an icon and press to access that function. If
there is a sub-menu, you can move between options using or , then press to select
that function. Use or to make adjustments. Press to save.
3. Press to move backwards through the sub-menus and exit from the OSD.
4. Press and hold for 10 seconds to lock the OSD. This will prevent accidental adjustments
to the OSD. Press and hold for 10 seconds to unlock the OSD and allow adjustments to
the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, Press and hold for 10 seconds to
disable / enable DDC/CI function. The words “DDC/CI disable” shows on the screen.
Chapter 2. 2-5
Table 2-2. OSD functions
OSD Icon on
Main Menu Sub menu Description Controls and
Adjustments
Screen Controls
Brightness Adjust bar 0~100 70
Contrast Adjust bar 0~100 85
Volume Adjust bar 0~100 50
Advanced Setup
Input Signal Thunderbolt™/DisplayPort/HDMI1/HDMI2 Thunderbolt™
Dynamic Contrast On/Off OFF
Over Drive Extreme/Normal/Off OFF
Color
AdobeRGB
AdobeRGB
sRGB D50
sRGB
DCI-P3 D65
DCI-P3 D63
BT.709
BT.2020
Neutral
Reddish
Bluish
Customer
Red adjust bar
Green adjust bar
Blue adjust bar
Close
Scenario Modes
Panel Native
Professional
Image
Image Creation
Image Preview
Digital Cinema
Professional Image
Video Creation
UHD Video
Low Blue Light
PIP/PBP
PBP Top-Bottom
Top Source
Thunderbolt™
Thunderbolt™
DisplayPort
HDMI1
HDMI2
Bottom Source
Thunderbolt™
Thunderbolt™
DisplayPort
HDMI1
HDMI2
Swap
PBP Left-Right
Left Source
Thunderbolt™
Thunderbolt™
DisplayPort
HDMI1
HDMI2
Right Source
Thunderbolt™
Thunderbolt™
DisplayPort
HDMI1
HDMI2
PBP Ratio 2:1
1:1
Swap
Chapter 2. 2-6
OSD Icon on
Main Menu Sub menu Description Controls and
Adjustments
Advanced Setup PIP/PBP
PIP
PIP Source
Thunderbolt™
Thunderbolt™
DisplayPort
HDMI 1
HDMI 2
PIP adjust
H. POS 0~100 0
V.POS 0~100 100
SIZE 0-100 50
Swap
Preset Color
AdobeRGB
AdobeRGB
sRGB D50
sRGB
DCI-P3 D65
DCI-P3 D63
BT.709
BT.2020
Audio Input
Thunderbolt™
Thunderbolt™
DisplayPort
HDMI 1
HDMI 2
OFF
Option
USB Selection Thunderbolt™ / USB Type-B Thunderbolt™
USB Charging On/Off Off
Button repeat rate Off/Default/Slow default
DP Select DP 1.1 / DP 1.2 DP1.2
HDMI 1 Select 1.4 / 2.0 2.0
OSD Setting
Language English/French/Italian/Chinese/Spanish/
Japanese/German/Russian English
Menu time out Adjust bar 5~60 30
Menu Horizontal (Joystick adjustment) 100
Menu Vertical (Joystick adjustment) 0
Factory Reset No No
Yes
Information (always on)
Exit
*Note:
HDMI 1 Select: Select 2.0 to be HDMI 2.0, select 1.4 to be HDMI 1.4.
Input: Display Port Resolution: 2560 x 1440 Volume: 60Color Mode: sRGB
P32u
Advanced Setup
OSD Setting
Exit
Screen Controls
Options
USB Selection Thunderbolt
Off
Default
DP 1.2
USB Charging
Button repeat rate
DP Select
HDMI 1 Select 1.4
2.0
Table 2-2. OSD functions
Chapter 2. 2-7
Selecting a supported display mode
The display mode the monitor uses is controlled by the computer. Therefore, refer to your
computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes. This is
normal and the image can be readjusted using automatic image setup and the image controls.
Unlike CRT monitors, which require a high refresh rate to minimize icker, LCD or Flat Panel
technology is inherently icker-free.
Note: If your system has previously been used with a CRT monitor and is currently congured
to a display mode outside the range of this monitor, you may need to reattach the CRT monitor
temporarily until you have re-congured the system; preferably to 3840 x 2160 at 60 Hz, which
is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Table 2-3. Factory set display modes
Timing Refresh rate(Hz)
480p (640x480) 60 Hz
480p (720x480) 60 Hz
720p 50/60 Hz
720x576p 50 Hz
1080i 50/60 Hz
1080p 50/60 Hz
720x400 70 Hz
640x480 60/75 Hz
800x600 60/75 Hz
1024x768 60/75 Hz
1280x1024 60/75 Hz
1440x900 60 Hz-R
1600x900 60 Hz
1680x1050 60 Hz
1920x1080 60 Hz-R
1920x1200 60 Hz
2560x1440 60 Hz
3840x2160 30 Hz
3840x2160 60 Hz
Chapter 2. 2-8
Understanding power management
Power management is invoked when the computer recognizes that you have not used your
mouse or keyboard for a user-denable period. There are several states as described in the table
below.
For optimal performance, switch off your monitor at the end of each working day, or whenever
you expect to leave it unused for long periods during the day.
Table 2-4. Power indicator
State Power Indicator Screen
Restoring
Operation Compliance
On Green Normal
Standby/Suspend Amber Blank Press a key or
move the mouse
There may be
a slight delay
before the image
reappears.
Note: Standby also
occurs if there is
no image output to
the monitor.
ENERGY STAR
Off Off Blank Press the power
button
There may be
a slight delay
before the image
reappears.
ENERGY STAR
Power Management Modes
VESA Modes Horizontal
Sync Vertical Sync Video Power
Indicator Power Consumption
Normal
operation Active Active Active Green 190 W (maximum)*
57 W (typical)
Active-off
mode Inactive Inactive Off Orange Less than 0.5 W
Switch off - - - Off Less than 0.3 W
Energy Star Power Consumption
PLIG 40.36 W
ETEC 130 kWh
* Maximum power consumption with max luminance.
This document is informational only and reflects laboratory performance. Your product may
perform differently, depending on the software, components and peripherals you ordered and
shall have no obligation to update such information. Accordingly, the customer should not rely
upon this information in making decisions about electrical tolerances or otherwise. No warranty
as to accuracy or completeness is expressed or implied.
Chapter 2. 2-9
Caring for your monitor
Be sure to turn off the power before you perform any maintenance on the monitor.
Do not:
yApply water or liquid directly to your monitor.
yUse solvents or abrasives.
yUse ammable cleaning materials to clean your monitor or any other electrical equipment.
yTouch the screen area of your monitor with sharp or abrasive items. This type of contact
may cause permanent damage to your screen.
yUse any cleaner which contains an anti-static solution or similar additives. This may harm
the coating of the screen area.
Do:
yLightly dampen a soft cloth with water and use this to gently wipe the covers and the
screen.
yRemove grease or nger marks with a damp cloth and a little mild detergent.
Detaching the monitor base and stand
Step 1: Place the monitor on a soft and at surface.
Step 2: Remove the base and stand from the monitor.
Wall Mounting (Optional)
Refer to the instructions that come with the base mounting kit. To convert your LCD display
from a desk-mounted to a wall-mounted display, do the following:
Step 1: Verify that the Power button is turned Off, then disconnect the power cord.
Step 2: Lay the LCD display face down on a towel or blanket.
Step 3: Remove the base from the monitor, refer to “Detaching the monitor base and stand”.
Chapter 2. 2-10
Step 4: Attach the mounting bracket from the VESA compatible wall mounting kit (100mm
x100mm distance), VESA Mounting Screw M4 x 10 mm.
VESA hole
Step 5: Attach the LCD display to the wall, following the instructions in the wallmounting kit.
For use only with UL/GS Listed Wall Mount Bracket with minimum weight/load: 8kg
Chapter 3. 3-1
Chapter 3. Reference information
3
This section contains monitor specications, instructions to manually install the monitor driver,
troubleshooting information, and service information.
Monitor specications
Table 3-1. Monitor specications for type-model 61C1-RAR2-WW
Dimensions Depth 350.0 mm (13.78 in.)
Height 497.85 mm (19.6 in.)
Width 726.7 mm (28.61 in.)
Panel Size 32 in.
Backlight LED
Aspect ratio 16:9
Stand Tilt Range: -5° ~ 30°
VESA mount Supported 100 mm x 100 mm (3.94 in. x 3.94 in.)
Image Viewable image size 812.8 mm (32 inch)
Maximum height 708.48 mm (27.9 inch)
Maximum width 398.52 mm (15.7 inch)
Pixel pitch 0.1845 mm (0.007 inch)
Power input Supply voltage 100-240V AC
Max supply current 2.4A
Power consumption Normal operation <190W (max)
<57W (typical)
Note: Power
consumption gures
are for the monitor
and the power supply
combined
Standby/Suspend <0.5W
Off <0.3W
Note: without USB/webcam/
external/speaker
Video input (DP) Interface DP
Input signal VESA TMDS (Panel Link™)
Horizontal addressability 3840 pixels (max)
Vertical addressability 2160 lines (max)
Clock frequency 5.4 GBps
Chapter 3. 3-2
Table 3-1. Monitor specications for type-model 61C1-RAR2-WW
Video input (HDMI) Interface HDMI
Input signal VESA TMDS (Panel Link™)
Horizontal addressability 3840 pixels (max)
Vertical addressability 2160 lines (max)
Clock frequency 600 MHz
Video input
(Thunderbolt™ 3
Input)
Interface Thunderbolt™ 3 Input
Input signal VESA TMDS (Panel Link™)
Horizontal addressability 3840 pixels (max)
Vertical addressability 2160 lines (max)
Clock frequency 5.4 GBps
Communications VESA DDC CI
Supported Display
Modes
Horizontal frequency 30 kHz -160 kHz
Vertical frequency 23 Hz - 80 Hz
Native Resolution 3840 x 2160 at 60 Hz
Temperature Operating 0° to 35° C (32° to 95° F)
Storage -20° to 60° C (-4° to 140° F)
Shipping -20° to 60° C (-4° to 140° F)
Humidity Operating 10% to 80% non-condensing
Storage 5% to 95% non-condensing
Shipping 5% to 95% non-condensing
Chapter 3. 3-3
Troubleshooting
If you have a problem setting up or using your monitor, you might be able to solve it yourself.
Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your
problem.
Table 3-2. Troubleshooting
Problem Possible cause Suggested action Reference
The words “Out
of Range” are
shown on the
screen, and the
power indicator
is ashing green.
The system is set to a
display mode which is
not supported by the
monitor.
If you are replacing an old
monitor, reconnect it and
adjust the display mode to
within the specied range for
your new monitor.
If using a Windows system,
restart the system in safe
mode, then select a supported
display mode for your
computer.
If these options do not work,
contact the Support Center.
“Selecting a supported
display mode”on page
2-8
The image
quality is
unacceptable.
The video signal cable
is not connected with
the monitor or system
completely.
Be sure the signal cable
is rmly plugged into the
system and monitor.
“Connecting and
turning on your
monitor”on page 1-5
The color settings may
be incorrect.
Select another color setting
from the OSD menu.
“Adjusting your
monitor image”on
page 2-3
The power
indicator is not
lit and there is no
image.
yThe monitor’s
power switch is not
switched on.
yThe power
cord is loose or
disconnected.
yThere is no power
at the outlet.
yBe sure the power cord is
connected properly.
yBe sure the outlet has
power.
yPower on the monitor.
yTry using another power
cord.
yTry using another
electrical outlet.
“Connecting and
turning on your
monitor”on page 1-5
Screen is blank
and power
indicator is
amber.
The monitor is in
Standby / Suspend
mode.
yPress any key on the
keyboard or move
the mouse to restore
operation.
yCheck the Power Options
settings on your computer.
“Understanding power
management”on page
2-9
The power
indicator is
orange, but there
is no image.
The video signal
cable is loose or
disconnected from the
system or monitor.
Be sure the video cable is
connected with the system
properly.
“Connecting and
turning on your
monitor”on page 1-5
The monitor brightness
and contrast are at the
lowest setting.
Adjust the brightness and
contrast setting on the OSD
menu.
“Adjusting your
monitor image”on
page 2-3
Chapter 3. 3-4
Table 3-2. Troubleshooting
Problem Possible cause Suggested action Reference
One or more of
the pixels appear
discolored.
This is a characteristic
of the LCD technology
and is not an LCD
defect.
If there are more than ve
pixels missing, contact the
Support Center.
Appendix A.”Service
and Support”on page
A-1
yFuzzy lines
in text or a
blurry image.
yHorizontal or
vertical lines
through the
image.
yImage setup has not
been optimized.
yYour system
Display Properties
setting have not
been optimized.
Adjust the resolution settings
on your system to match
the native resolution for this
monitor: 3840 x 2160 at 60
Hz.
“Adjusting your
monitor image”on
page 2-3
Perform automatic image
setup. If automatic image
setup does not help, perform
manual image setup.
“Selecting a supported
display mode”on page
2-8
When working in the native
resolution, you may nd
additional improvements by
adjusting the Dots Per Inch
(DPI) setting on your system.
See the Advanced
section of your
system’s display
properties.
*Note: The P32u-10 monitor supports Thunderbolt™ 3 technology. There is a wide range of sources and
devices on the market. Some compatibility issues may be experienced including use with USB Type-C.
Chapter 3. 3-5
Manually installing the monitor driver
Below are steps for manually installing the monitor driver in Microsoft Windows 7, Microsoft
Windows 10.
Installing the monitor driver in Windows 7
To use the Plug and Play feature in Microsoft Windows 7, do the following:
1. Turn off the computer, all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows 7
operating system.
4. From the Lenovo website http://support.lenovo.com/docs/P32u_10, nd the corresponding
monitor driver and download it to a PC to which this monitor is connected (such as a
desktop).
5. Open the Display Properties window by clicking Start, Control Panel and Hardware
and Sound icon. and then clicking the Display icon.
6. Click the Change the display settings tab.
7. Click the Advanced Settings icon.
8. Click the Monitor tab.
9. Click the Properties button.
10. Click the Driver tab.
11. Click Update Driver, then click Browse the computer to nd the driver program.
12. Select Pick from the list of device driver program on the computer.
13. Click the Hard Disk button. By clicking the Browse button, browse and point to the
following path:
X:\Monitor Drivers\Windows 7
(where X indicates “the folder in which the downloaded driver is located” (such as a
desktop)).
14. Select the “lenp32u-10.inf” le and click the Open button. Click the OK button.
15. In the new window, select LEN P32u-10 and click Next.
16. After the installation is complete, delete all downloaded les and close all windows.
17. Restart the system. The system will automatically select the maximum refresh rate and
corresponding Color Matching Proles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
Lenovo recommends using either 3840 x 2160 at a refresh rate of 60 Hz, or 640 x 480 at a
refresh rate of 60 Hz.
Chapter 3. 3-6
Installing the monitor driver in Windows 10
To use the Plug and Play feature in Microsoft Windows 10, do the following:
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows 10
operating system.
4. From the Lenovo website http://support.lenovo.com/docs/P32u_10, nd the corresponding
monitor driver and download it to a PC to which this monitor is connected (such as a
desktop).
5. On the Desktop, move mouse to bottom-left corner of screen, right-click choose Control
Panel, then double click the icon of Hardware and Sound, and then click Display.
6. Click the Change the display settings tab.
7. Click the Advanced Settings icon.
8. Click the Monitor tab.
9. Click the Properties button.
10. Click the Driver tab.
11. Click Update Driver, then click Browse the computer to nd the driver program.
12. Select Pick from the list of device driver program on the computer.
13. Click the Hard Disk button. By clicking the Browse button, browse and point to the
following path:
X:\Monitor Drivers\Windows 10
(where X indicates “the folder in which the downloaded driver is located” (such as a
desktop)).
14. Select the “lenp32u-10.inf” le and click the Open button. Click the OK button.
15. In the new window, select LEN P32u-10 and click Next.
16. After the installation is complete, delete all downloaded les and close all windows.
17. Restart the system. The system will automatically select the maximum refresh rate and
corresponding Color Matching Proles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
Lenovo recommends using either 3840 x 2160 at a refresh rate of 60 Hz, or 640 x 480 at a
refresh rate of 60 Hz.
Getting further help
If you still can’t solve your problem, please contact the Lenovo Support Center. For more
information on contacting the Support Center, please see Appendix A.”Service and Support”on
page A-1
Chapter 3. 3-7
Service information
Customer responsibilities
The warranty does not apply to a product which has been damaged due to accident, misuse,
abuse, improper installation, usage not in accordance with product specications and
instructions, natural or personal disaster, or unauthorized alterations, repairs or modications.
The following are examples of misuse or abuse and not covered by warranty:
yImages burned onto the screen of a CRT monitor. Burned image is preventable by utilizing
a moving screen saver or power management.
yPhysical damage to covers, bezel, base and cables.
yScratches or punctures on monitor screens.
Service parts
The following parts are for use by Lenovo service, or Lenovo aurthorized dealers, to support the
customer warranty. Parts are for service use only. The table below shows information for model
61C1-RAR2-WW.
Table 3-3. List of service parts
FRU (FIELD
REPLACEABLE
UNIT) PART
NUMBER
DESCRIPTION Machine Type/
Model (MTM)
COLOR GEOGRAPHY
01YY040 P32u-10 - 32inch FRU
Monitor (HDMI)
61C1 Raven Black WORLDWIDE
01YY041 P32u-10 DP cable 61C1 Raven Black WORLDWIDE
01YY042 P32u-10 HDMI cable 61C1 Raven Black WORLDWIDE
01YY043 P32u-10 USB Type-A to
Type-B cable
61C1 Raven Black WORLDWIDE
01YY044 P32u-10 -
Thunderbolt™ cable
61C1 Raven Black WORLDWIDE
01YY045 P32u-10 - FRU Base
and Stand
61C1 Raven Black WORLDWIDE
Appendix A. A-1
Appendix A. Service and Support
A
The following information describes the technical support that is available for your product,
during the warranty period or throughout the life of your product. Refer to the Lenovo Limited
Warranty for a full explanation of Lenovo warranty terms.
Registering your option
Register to receive product service and support updates, as well as free and discounted
computer accessories and content. Go to: http://www.lenovo.com/register
Online technical support
Online technical support is available during the lifetime of a product at: http://www.lenovo.
com/support
Product replacement assistance or exchange of defective components also is available during
the warranty period. In addition, if your option is installed in a Lenovo computer, you might
be entitled to service at your location. A Lenovo technical support representative can help you
determine the best alternative.
Telephone technical support
Installation and conguration support through the Customer Support Center will be available
until 90 days after the option has been withdrawn from marketing. After that time, the support
is cancelled, or made available for a fee, at Lenovo’s discretion. Additional support is also
available for a nominal fee.
Before contacting a Lenovo technical support representative, please have the following
information available: option name and number, proof of purchase, computer manufacturer,
model, serial number and manual, the exact wording of any error message, description of the
problem, and the hardware and software conguration information for your system.
Your technical support representative might want to walk you through the problem while you
are at your computer during the call.
Telephone numbers are subject to change without notice. The most up-to-date telephone list for
Lenovo Support is always available at: http://consumersupport.lenovo.com
Country or Region Telephone Number
Argentina 0800-666-0011
(Spanish, English)
Australia 1-800-041-267
(English)
Austria 0810-100-654 (For local rate)
(German)
Belgium Warranty service and support: 02-339-36-11
(Dutch, French)
Bolivia 0800-10-0189
(Spanish)
Appendix A. A-2
Country or Region Telephone Number
Brazil Calls made from within the Sao Paulo region: 11-3889-8986
Calls made from outside the Sao Paulo region: 0800-701-4815
(Portuguese)
Brunei Darussalam Dial 800-1111
(English)
Canada 1-800-565-3344
(English, French)
Chile 800-361-213
(Spanish)
China Technical Support Line: 400-990-8888
(Mandarin)
China
(Hong Kong S.A.R.)
(852) 3516-8977
(Cantonese, English, Mandarin)
China
(Macau S.A.R.)
0800-807 / (852) 3071-3559
(Cantonese, English, Mandarin)
Colombia 1-800-912-3021
(Spanish)
Costa Rica 0-800-011-1029
(Spanish)
Croatia 385-1-3033-120
(Croatian)
Cyprus 800-92537
(Greek)
Czech Republic 800-353-637
(Czech)
Denmark Warranty service and support: 7010-5150
(Danish)
Dominican Republic 1-866-434-2080
(Spanish)
Ecuador 1-800-426911-OPCION 4
(Spanish)
Egypt Primary: 0800-0000-850
Secondary: 0800-0000-744
(Arabic,English)
El Salvador 800-6264
(Spanish)
Estonia 372-66-0-800
(Estonian, Russian, English)
Finland Warranty service and support: +358-800-1-4260
(Finnish)
France Warranty service and support: 0810-631-213 (hardware)
(French)
Germany Warranty service and support: 0800-500-4618 (toll-free)
(German)
Appendix A. A-3
Country or Region Telephone Number
Greece Lenovo Business Partner
(Greek)
Guatemala Dial 999-9190, wait for operator, and request to reach 877-404-9661
(Spanish)
Honduras Dial 800-0123
(Spanish)
Hungary +36-13-825-716
(English, Hungarian)
India Primary: 1800-419-4666 (Tata)
Secondary: 1800-3000-8465 (Reliance)
Email: commercialts@lenovo.com
(English and Hindi)
Indonesia 1-803-442-425
62 213-002-1090 (Standard Charges Apply)
(English, Bahasa Indonesia)
Ireland Warranty service and support: 01-881-1444
(English)
Israel Givat Shmuel Service Center: +972-3-531-3900
(Hebrew, English)
Italy Warranty service and support: +39-800-820094
(Italian)
Japan 0120-000-817
(Japanese, English)
Kazakhstan 77-273-231-427 (Standard Charges Apply)
(Russian, English)
Korea 080-513-0880 (Collect call)
02-3483-2829 (Toll Call)
(Korean)
Latvia 371-6707-360
(Latvian, Russian, English)
Lithuania 370 5278 6602
(Italian, Russian, English )
Luxembourg ThinkServer and ThinkStation: 352-360-385-343
ThinkCentre and ThinkPad: 352-360-385-222
(French)
Malaysia 1-800-88-0013
03-7724-8023 (Standard Charges Apply)
(English)
Malta 356-21-445-566
(English, Italian, Maltese Arabic)
Mexico 001-866-434-2080
(Spanish)
Netherlands 020-513-3939
(Dutch)
New Zealand 0508-770-506
(English)
Appendix A. A-4
Country or Region Telephone Number
Nicaragua 001-800-220-2282
(Spanish)
Norway 8152-1550
(Norwegian)
Panama Lenovo Customer Support Center: 001-866-434 (toll-free)
(Spanish)
Peru 0-800-50-866 OPCION 2
(Spanish)
Philippines 1-800-8908-6454 (GLOBE subscribers)
1-800-1441-0719 (PLDT subscribers)
(Tagalog, English)
Poland Laptops and tablets branded with logo Think: 48-22-273-9777
ThinkStation and ThinkServer: 48-22-878-6999
(Polish, English )
Portugal 808-225-115 (Standard Charges Apply)
(Portuguese)
Romania 4-021-224-4015
(Romanian)
Russia +7-499-705-6204
+7-495-240-8558 (Standard Charges Apply)
(Russian)
Singapore 1-800-415-5529
6818-5315 (Standard Charges Apply)
(English, Mandarin, Bahasa Malaysia)
Slovakia ThinkStation and ThinkServer: 421-2-4954-5555
Slovenia 386-1-2005-60
(Slovenian)
Spain 34-917-147-833
(Spanish)
Sri Lanka 9477-7357-123 (Sumathi Information systems)
(English)
Sweden Warranty service and support: 077-117-1040
(Swedish)
Switzerland Warranty service and support: 0800-55-54-54
(German, French, Italian)
Taiwan 0800-000-702
(Mandarin)
Thailand 001-800-4415-734
(+662) 787-3067 (Standard Charges Apply)
(Thai, English)
Turkey 444-04-26
(Turkish)
United Kingdom Standard warranty support: 03705-500-900 ( local rate)
Standard warranty support: 08705-500-900
(English)
Appendix A. A-5
Country or Region Telephone Number
United States 1-800-426-7378
(English)
Uruguay 000-411-005-6649
(Spanish)
Venezuela 0-800-100-2011
(Spanish)
Vietnam 120-11072 (Toll Free)
84-8-4458-1042 (Standard Charges Apply)
(Vietnamese, English)
Appendix B. B-1
Appendix B. Notices
B
Lenovo may not offer the products, services, or features discussed in this document in all
countries. Consult your local Lenovo representative for information on the products and
services currently available in your area. Any reference to a Lenovo product, program, or
service is not intended to state or imply that only that Lenovo product, program, or service may
be used. Any functionally equivalent product, program, or service that does not infringe any
Lenovo intellectual property right may be used instead.
However, it is the user ‘s responsibility to evaluate and verify the operation of any other
product, program, or service.
Lenovo may have patents or pending patent applications covering subject matter described in
this document. The furnishing of this document does not give you any license to these patents.
You can send license inquiries, in writing, to:
Lenovo (United States), Inc.
1009 Think Place - Building One
Morrisville, NC 27560
U.S.A.
Attention: Lenovo Director of Licensing
LENOVO PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or
implied warranties in certain transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors. Changes are
periodically made to the information herein; these changes will be incorporated in new editions
of the publication. Lenovo may make improvements and/or changes in the product(s) and/or the
program(s) described in this publication at any time without notice.
The products described in this document are not intended for use in implantation or other
life support applications where malfunction may result in injury or death to persons. The
information contained in this document does not affect or change Lenovo product specications
or warranties. Nothing in this document shall operate as an express or implied license or
indemnity under the intellectual property rights of Lenovo or third parties. All information
contained in this document was obtained in specic environments and is presented as an
illustration. The result obtained in other operating environments may vary.
Lenovo may use or distribute any of the information you supply in any way it believes
appropriate without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for convenience only
and do not in any manner serve as an endorsement of those Web sites. The materials at those
Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at
your own risk.
Any performance data contained herein was determined in a controlled environment.
Therefore, the result obtained in other operating environments may vary signicantly. Some
measurements may have been made on development-level systems and there is no guarantee
that these measurements will be the same on generally available systems. Furthermore, some
measurements may have been estimated through extrapolation. Actual results may vary. Users
of this document should verify the applicable data for their specic environment.
Appendix B. B-2
Recycling information
Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their
equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist
equipment owners in recycling their IT products. For information on recycling Lenovo products, go to:
http://www.lenovo.com/recycling
Collecting and recycling a disused Lenovo computer or monitor
If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property
of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of
Resources. Computers and monitors are categorized as industrial waste and should be properly disposed
of by an industrial waste disposal contractor certied by a local government. In accordance with the Law
for Promotion of Effective Utilization of Resources, Lenovo Japan provides, through its PC Collecting
and Recycling Services, for the collecting, reuse, and recycling of disused computers and monitors. For
details, visit the Lenovo Web site at www.ibm.com/jp/pc/service/recycle/ pcrecycle/. Pursuant to the Law
for Promotion of Effective Utilization of Resources, the collecting and recycling of home-used computers
and monitors by the manufacturer was begun on October 1, 2003. This service is provided free of charge
for home-used computers sold after October 1, 2003. For details, visit the Lenovo Web site at www.ibm.
com/jp/pc/service/recycle/personal/.
Disposing of Lenovo computer components
Some Lenovo computer products sold in Japan may have components that contain heavy metals or other
environmental sensitive substances. To properly dispose of disused components, such as a printed circuit
board or drive, use the methods described above for collecting and recycling a disused computer or
monitor.
Trademarks
The following terms are trademarks of Lenovo in the United States, other countries, or both:
Lenovo
The Lenovo logo
ThinkCenter
ThinkPad
ThinkVision
Microsoft, Windows, and Windows NT are trademarks of the Microsoft group of companies.
Other company, product, or service names may be trademarks or service marks of others.
Appendix B. B-3
Power cords and power adapters
Use only the power cords and power adapters supplied by the product manufacture Do not use
the ac power cord for other devices.