Table of Contents
- Chapter 1. Overview
- Chapter 2. Specifications
- Chapter 3. Computer locks
- Chapter 4. Replacing hardware
- Before replacing hardware
- Knowing FRUs (including CRUs)
- Locating FRUs (including CRUs)
- Replacing the keyboard or wireless keyboard
- Replacing the mouse or wireless mouse
- Replacing the power adapter
- Replacing the monitor stand
- Removing the LCD panel
- Replacing the LCD front decorative cover
- Replacing the integrated microphone
- Replacing the LCD bracket
- Replacing the integrated camera
- Replacing the optical drive
- Replacing the optical drive holder
- Replacing the storage drive
- Replacing the power button board
- Replacing the internal speaker
- Replacing the I/O board
- Replacing the system fan
- Replacing the heat sink
- Replacing the memory module
- Replacing the M.2 solid-state drive
- Replacing the microprocessor
- Replacing the Wi-Fi card
- Replacing the Wi-Fi antennas
- Replacing the system board
- Replacing the coin-cell battery
- Replacing the system board frame
- Replacing the VESA mount bracket
- Completing the parts replacement
- Appendix A. Notices
- Appendix B. Trademarks
Lenovo V530 User Manual
Displayed below is the user manual for V530 by Lenovo which is a product in the All-in-One PCs/Workstations category. This manual has pages.
Related Manuals
Lenovo V530-22ICB AIO User Guide and
Hardware Maintenance Manual
Energy Star Machine Types: 10US, 10UT, 10UU, and 10UV
Note: Before using this information and the product it supports, be sure to read and understand the
Important Product Information Guide and Appendix A “Notices” on page 61.
First Edition (June 2018)
© Copyright Lenovo 2018.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services
Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-
35F-05925.
Contents
Chapter 1. Overview. . . . . . . . . . . 1
Front view . . . . . . . . . . . . . . . . . . 1
Rear view . . . . . . . . . . . . . . . . . . 2
System board . . . . . . . . . . . . . . . . 4
Machine type and model label . . . . . . . . . . 5
Adjusting the monitor stand . . . . . . . . . . . 6
Chapter 2. Specifications . . . . . . . . 7
Chapter 3. Computer locks . . . . . . . 9
Attaching a Kensington-style cable lock . . . . . . 9
Chapter 4. Replacing hardware . . . . 11
Before replacing hardware . . . . . . . . . . 11
Knowing FRUs (including CRUs) . . . . . . . . 11
Locating FRUs (including CRUs) . . . . . . . . 12
Replacing the keyboard or wireless keyboard . . . 14
Replacing the mouse or wireless mouse . . . . . 15
Replacing the power adapter . . . . . . . . . 18
Replacing the monitor stand . . . . . . . . . . 20
Removing the LCD panel . . . . . . . . . . . 22
Replacing the LCD front decorative cover. . . . . 24
Replacing the integrated microphone . . . . . . 25
Replacing the LCD bracket . . . . . . . . . . 26
Replacing the integrated camera . . . . . . . . 27
Replacing the optical drive . . . . . . . . . . 28
Replacing the optical drive holder . . . . . . . . 32
Replacing the storage drive . . . . . . . . . . 32
Replacing the power button board . . . . . . . 35
Replacing the internal speaker . . . . . . . . . 36
Replacing the I/O board . . . . . . . . . . . 37
Replacing the system fan . . . . . . . . . . . 38
Replacing the heat sink . . . . . . . . . . . . 39
Replacing the memory module . . . . . . . . . 41
Replacing the M.2 solid-state drive . . . . . . . 43
Replacing the microprocessor . . . . . . . . . 47
Replacing the Wi-Fi card . . . . . . . . . . . 50
Replacing the Wi-Fi antennas . . . . . . . . . 52
Replacing the system board . . . . . . . . . . 53
Replacing the coin-cell battery . . . . . . . . . 54
Replacing the system board frame . . . . . . . 56
Replacing the VESA mount bracket . . . . . . . 57
Completing the parts replacement . . . . . . . 58
Appendix A. Notices. . . . . . . . . . 61
Appendix B. Trademarks . . . . . . . 63
© Copyright Lenovo 2018 i
ii Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Chapter 1. Overview
This chapter provides basic information to help you get familiar with your computer.
Front view
Note: Your computer model might look slightly different from the illustration.
Figure 1. Front view
1 Integrated camera activity indicator (optional) 2 Infrared light-emitting diodes (LEDs) (2) (optional)
3 Integrated camera shield control slider (optional) 4 Integrated camera (optional)
5 Power button 6 Internal speakers (2)
7 Integrated microphone 8 USB 3.1 Gen 1 connector
9 Card reader slot 10 Headset connector
11 Screen
1 Integrated camera activity indicator (optional)
When the indicator is on, the camera is in use.
2 Infrared light-emitting diodes (LEDs) (optional)
The LEDs are on when you are using the Microsoft® Windows® Hello face authentication feature.
Note: In the Windows 10 operating system, the Windows Hello face authentication feature enables you to
log in to the computer using face recognition. For more details, go to:
© Copyright Lenovo 2018 1
https://www.microsoft.com
3 Integrated camera shield control slider
Used to cover the integrated camera.
4 Integrated camera
Used to take pictures or hold a video conference.
5 Power button
Used to turn on your computer. When you cannot shut down the computer from the operating system, press
and hold the power button for four or more seconds to turn off the computer.
6 Internal speakers
Used to listen to the sounds from your computer without using a headset or headphones.
7 Integrated microphone
Used to record sounds or use speech-recognition software without using a microphone.
8 USB 3.1 Gen 1 connector
Used to connect a USB-compatible device. For optimal data transfer, connect a USB 3.1 Gen 1 device to a
USB 3.1 Gen 2 or USB 3.1 Gen 1 connector instead of a USB 2.0 connector.
9 Card reader slot
Used to read data from a supported memory card.
10 Headset connector
Used to connect a headset or headphones to your computer.
11 Screen
Depending on the computer model, your computer screen might support the multi-touch feature. This
feature enables you to use one or two fingers to interact with the computer.
Notes:
• To single click, tap the touch screen once with your finger.
• To double-click, tap the touch screen twice without pausing.
• To right-click, tap and hold the touch screen until a round circle is displayed. Then, lift your finger off the
touch screen to display a context menu. You can make your selection from the menu.
• To make it easier to read or edit a document, use two fingers to zoom in, zoom out, scroll, or rotate on the
touch screen.
Rear view
Note: Your computer model might look slightly different from the illustration.
2Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Figure 2. Rear view
1 USB 3.1 Gen 1 connector 2 HDMI™ 1.4 in connector
3 USB 3.1 Gen 2 connector 4 USB 2.0 connectors (3)
5 HDMI 1.4 out connector 6 Ethernet connector
7 Power adapter connector 8 Security-lock slot
9 VESA® threaded holes 10 Optical drive activity indicator (optional)
11 Optical drive eject/close button (optional)
1 USB 3.1 Gen 1 connector
Used to connect a USB-compatible device. For optimal data transfer, connect a USB 3.1 Gen 1 device to a
USB 3.1 Gen 2 or USB 3.1 Gen 1 connector instead of a USB 2.0 connector.
2 HDMI 1.4 out connector
Used to send video and audio signals from your computer to another audio or video device, such as a high-
performance monitor.
3 USB 3.1 Gen 2 connector
Used to connect a USB-compatible device. For optimal data transfer, connect a USB 3.1 Gen 2 device to a
USB 3.1 Gen 2 connector instead of a USB 3.1 Gen 1 or USB 2.0 connector.
4 USB 2.0 connectors
Used to connect a USB-compatible device. For optimal data transfer, connect a USB 2.0 device to a USB
2.0 connector.
5 HDMI 1.4 in connector
Chapter 1.Overview 3
Used to send video and audio signals from your computer to another audio or video device, such as a high-
performance monitor.
6 Ethernet connector
Used to connect an Ethernet cable for network access.
7 Power adapter connector
Used to connect the power adapter to your computer for power supply.
8 Security-lock slot
Used to secure a Kensington-style cable lock.
9 VESA threaded holes
Used to connect the matched VESA mount with the matched screws when you install the computer on the
wall. When you need to install the computer onto the ceiling or the wall, install four M4 x 10 mm screws there.
Note: Before connecting to the VESA mount, attach a mounting pad with 2.6 mm thickness to each screw
hole on the VESA mount.
10 Optical drive activity indicator (optional)
This indicator is on when the optical drive is in use.
11 Optical drive eject/close button (optional)
Used to eject the tray of the optical drive. After you insert a disc into the tray, press the eject/close button to
close the tray.
System board
Note: See “Front view” and “Rear view” for additional component descriptions.
4Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Figure 3. System board
1 Integrated camera connector 2 Microprocessor socket
3 Memory slot 1 (DIMM1) 4 Memory slot 2 (DIMM2)
5 System fan connector 6 LVDS connector
7 Optical drive connector 8 Power button board connector
9 LCD backlight connector 10 IO board connector 3
11 M.2 solid-state drive slot 12 JCRIS1 pads
13 M.2 Wi-Fi card slot 14 I/O board connector 1
15 Internal speaker connector 16 I/O board connector 2
17 Coin-cell battery 18 SATA connector for storage drive
19 Power connector for storage drive
Machine type and model label
The machine type and model label identifies the computer. When you contact Lenovo for help, the machine
type and model information helps support technicians to identify the computer and provide faster service.
The machine type and model label is attached on the computer as shown.
Chapter 1.Overview 5
Figure 4. Machine type and model label
Adjusting the monitor stand
Note: The monitor stand is optional.
• Adjust the vertical position of the computer between 5° forward and 65° back.
Figure 5. Adjusting the vertical position of the computer between 5° forward and 65° back
• Adjust the angle of the computer between 45° to the left and 45° to the right.
Figure 6. Adjusting the angle of the computer between 45° to the left and 45° to the right
6Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Chapter 2. Specifications
Power supply
• 90-watt automatic voltage-sensing power supply
• 120-watt automatic voltage-sensing power supply
Storage drives
• 2.5-inch storage drive (optional)
• M.2 solid-state drive (optional)
Video features
• HDMI 1.4 in connector
• HDMI 1.4 out connector
Audio features
• The integrated video card supports the following:
– Headset connector
– Integrated microphone
– Internal speaker
• The optional discrete video card provides an enhanced audio experience and extended capabilities.
Input/Output (I/O) features
• Audio connectors (headset connector and integrated microphone connector)
• Card reader slot
• Ethernet connector
• HDMI 1.4 in connector
• HDMI 1.4 out connector
• Headset connector
• USB connectors (USB 2.0 and USB 3.1)
Expansion
• Memory slots
• Optical drive (optional)
• Storage drive bay
Network features
• Ethernet LAN
• Wireless LAN (optional)
• Bluetooth (optional)
Physical dimensions
• For V530-22ICB:
– Width: 490 mm (19.3 inches)
© Copyright Lenovo 2018 7
– Height: 409 mm (16.1 inches)
– Depth: 228 mm (9.0 inches)
• For V530-24ICB:
– Width: 543 mm (21.4 inches)
– Height: 437 mm (17.2 inches)
– Depth: 228 mm (9.0 inches)
Weight (without the package)
• For V530-22ICB: Maximum configuration as shipped: 6.1kg (16.3 lb)
• For V530-24ICB: Maximum configuration as shipped: 7.0 kg (18.8 lb)
8Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Chapter 3. Computer locks
This chapter provides instructions on how to lock your computer with the locking devices to keep your
computer safe.
Attaching a Kensington-style cable lock
You can use a Kensington-style cable lock to secure your computer to a desk, table, or other nonpermanent
fixture. The cable lock connects to the security-lock slot at the rear of your computer. Depending on the type
selected, the cable lock can be operated with a key or combination. The cable lock also locks the buttons
used to open the computer cover. This is the same type of lock used with many notebook computers. You
can order such a cable lock directly from Lenovo by searching for Kensington at:
http://www.lenovo.com/support
Figure 7. Attaching a Kensington-style cable lock
© Copyright Lenovo 2018 9
10 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Chapter 4. Replacing hardware
This chapter provides instructions on how to replace hardware for your computer.
Before replacing hardware
Attention: Do not open your computer or attempt any repairs before reading this section and the Important
Product Information Guide.
Notes before replacing hardware
• Use computer components provided only by Lenovo.
• When installing or replacing an option, use the appropriate instructions explained in this manual along with
the instructions that come with the option.
• In most areas of the world, Lenovo requires the return of defective CRUs. Information about this will come
with the CRU or will come a few days after the CRU arrives.
Handling static-sensitive devices
Do not open the static-protective package containing the new part until the defective part has been removed
and you are ready to install the new part. Static electricity, although harmless to you, can seriously damage
computer components and options.
When you handle options and other computer components, take these precautions to avoid static-electricity
damage:
• Limit your movement. Movement can cause static electricity to build up around you.
• Always handle options and other computer components carefully. Handle PCI/PCIe cards, memory
modules, system boards, and microprocessors by the edges. Never touch any exposed circuitry.
• Prevent others from touching the options and other computer components.
• Touch the static-protective package containing the part to a metal expansion-slot cover or other
unpainted metal surface on the computer for at least two seconds. This reduces static electricity from the
package and your body before you install or replace a new part.
• When possible, remove the new part from the static-protective package, and install it directly in the
computer without setting the part down. When this is not possible, place the static-protective package on
a smooth, level surface and place the part on the package.
• Do not place the part on the computer cover or other metal surface.
Knowing FRUs (including CRUs)
• Field Replaceable Units (FRUs) are computer parts that a trained technician can upgrade or replace. FRUs
include all CRUs. For detailed FRU information, such as the FRU part numbers and supported computer
models, go to:
http://www.lenovo.com/serviceparts-lookup
• Customer Replaceable Units (CRUs) are computer parts that a user can upgrade or replace.
– Self-service CRUs: You can install self-service CRUs easily. These CRUs might be stand-alone,
latched, or secured by up to two screws. Examples of self-service CRUs include the keyboard, mouse,
any USB device. You are responsible for replacing all self-service CRUs.
– Optional-service CRUs: Handling optional-service CRUs requires some technical skills and simple tools
(such as a screwdriver). These CRUs are isolated parts within the computer. They are usually
© Copyright Lenovo 2018 11
concealed by an access panel that is secured by more than two screws. You must remove the screws
and panel to access the specific CRU. Optional-service CRUs can be removed and installed by users
or, during the warranty period, by a Lenovo service technician.
Before replacing FRUs
Before replacing any FRU, read the following:
• Only certified and trained personnel can service the computer.
• Before replacing an FRU, read the entire section about replacing the part.
• Be extremely careful during writing operations such as copying, saving, or formatting.
The sequence of the drives in the computer that you are servicing might have been altered. If you select
an incorrect drive, data or programs might be overwritten.
• Replace an FRU only with another FRU of the correct model.
When you replace an FRU, ensure that the model of the machine and the FRU part number are correct.
• An FRU should not be replaced because of a single, unreproducible failure.
Single failures can occur for a variety of reasons that have nothing to do with a hardware defect, such as
cosmic radiation, electrostatic discharge, or software errors. Consider replacing an FRU only when a
problem recurs. If you suspect that an FRU is defective, clear the error log and run the test again. If the
error does not recur, do not replace the FRU.
• Only replace a defective FRU.
Locating FRUs (including CRUs)
Notes:
• Some of the components are optional.
• To replace a component that is not in the list below, contact a Lenovo service technician. For a list of
Lenovo Support phone numbers, go to:
http://www.lenovo.com/support/phone
12 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Figure 8. Locating FRUs (including CRUs)
Self-service CRUs Non-CRUs
19 Monitor stand 1 LCD front decorative cover
20 Monitor stand base 2 LCD panel
40 Mouse 3 LCD bracket
41 Keyboard 4 Integrated microphone bracket
42 Power cord 5 Integrated microphone
43 Power adapter 6 LCD backlight cable
7 LVDS cable
8 Optical drive bracket
9 Optical drive holder
10 Optical drive cable
11 Optical drive
Chapter 4.Replacing hardware 13
Self-service CRUs Non-CRUs
12 Optical drive bezel
13 VESA mount bracket
14 Storage drive cable
15 Integrated camera
16 Storage drive bracket
17 Storage drive
18 Computer cover
21 Power button board
22 Power button board cable
23 Wi-Fi antennas
24 Internal speakers
25 I/O board cable 1
26 I/O board cable 3
27 I/O board cable 2
28 I/O board bracket
29 I/O board
30 System board frame
31 Coin-cell battery
32 Memory module
33 System fan
34 Microprocessor
35 Heat sink
36 System board
37 Wi-Fi card
38 Wi-Fi card shield
39 M.2 solid-state drive
Replacing the keyboard or wireless keyboard
Note: The wireless keyboard is available only on some models.
Replacing the keyboard
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Disconnect the old keyboard cable from the computer.
3. Connect a new keyboard to the appropriate connector on the computer.
14 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Figure 9. Replacing the keyboard
Replacing the wireless keyboard
1. Remove your old wireless keyboard.
2. Take out the new wireless keyboard from the package.
3. Open the battery compartment cover, and install two AAA batteries according to the polarity indicators.
Figure 10. Replacing the wireless keyboard
4. Remove the USB dongle from the keyboard compartment or from the wireless mouse compartment and
connect it to an available USB connector on the computer.
5. Close the compartment cover. The keyboard is ready for use.
Replacing the mouse or wireless mouse
Note: The wireless mouse is available only on some models.
Replacing the mouse
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Disconnect the old mouse cable from the computer.
3. Connect a new mouse to the appropriate connector on the computer.
Chapter 4.Replacing hardware 15
Figure 11. Replacing the mouse
Replacing the wireless mouse
1. Disconnect the USB dongle from your computer. Then, remove your old wireless mouse.
2. Remove the new wireless mouse from the package.
3. Open the battery compartment cover, and install two AAA batteries according to the polarity indicators.
Figure 12. Opening the battery compartment
Figure 13. Taking out the USB dongle
16 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Figure 17. Pushing the power switch to the on position
Notes:
• The green LED indicates that the mouse is ready for use.
• The flashing amber LED indicates a low battery level.
• Push the power switch to the off position when you are not using the mouse to extend the battery life.
• After disconnecting the USB dongle from your computer, store it in the wireless mouse compartment
or in the wireless keyboard compartment.
Replacing the power adapter
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove any media from the drives and turn off all connected devices and the computer.
2. Disconnect all power cords from electrical outlets and disconnect all cables that are connected to the
computer.
3. Replace the power adapter.
Note: Your power adapter might look different from the one illustrated.
18 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Figure 21. Installing the power adapter
Replacing the monitor stand
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove any media from the drives and turn off all connected devices and the computer.
2. Disconnect all power cords from electrical outlets and disconnect all cables that are connected to the
computer.
3. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently lay
it down so that the screen is against the surface and the computer cover is facing up.
4. Replace the monitor stand.
Figure 22. Removing the monitor stand
20 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Removing the LCD panel
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
CAUTION:
Before you open the LCD panel, turn off the computer and wait several minutes until the
computer is cool.
1. Remove any media from the drives and turn off all connected devices and the computer.
2. Disconnect all power cords from electrical outlets and disconnect all cables that are connected to the
computer.
3. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
4. Remove the LCD panel.
Figure 27. Pulling out the LCD panel screw cap
Figure 28. Removing or loosening the screws
22 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Figure 31. Disconnecting the LCD cables from the system board
Replacing the LCD front decorative cover
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
2. Remove the LCD panel. See “Removing the LCD panel” on page 22.
3. Remove the screws that secure the LCD front decorative cover to remove the cover.
Figure 32. Removing the screws that secure the LCD front decorative cover
4. Install the screws to secure the new LCD front decorative cover to the LCD panel.
5. Complete the replacement. See “Completing the parts replacement” on page 58.
24 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Replacing the integrated microphone
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
2. Remove the LCD panel. See “Removing the LCD panel” on page 22.
3. Disconnect the integrated microphone cable from the LCD panel.
4. Replace the integrated microphone.
Figure 33. Removing the integrated microphone
Figure 34. Removing the integrated microphone bracket
Chapter 4.Replacing hardware 25
Figure 35. Installing the integrated microphone bracket
Figure 36. Installing the integrated microphone
5. Connect the integrated microphone cable to the LCD panel.
6. Complete the replacement. See “Completing the parts replacement” on page 58.
Replacing the LCD bracket
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
2. Remove the LCD panel. See “Removing the LCD panel” on page 22.
3. Remove the LCD front decorative cover. See “Replacing the LCD front decorative cover” on page 24.
4. Remove the integrated microphone. See “Replacing the integrated microphone” on page 25.
5. Disconnect the LCD cables from the LCD panel.
6. Remove the screws that secure the LCD bracket.
26 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Figure 37. Removing the LCD bracket screws
7. Install the screws to secure the new LCD bracket to the LCD panel.
8. Connect the LCD cables to the LCD panel.
9. Complete the replacement. See “Completing the parts replacement” on page 58.
Replacing the integrated camera
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
2. Remove the LCD panel. See “Removing the LCD panel” on page 22.
3. Disconnect the integrated camera cable from the system board.
4. Replace the integrated camera.
Figure 38. Removing the integrated camera
Chapter 4.Replacing hardware 27
Figure 39. Installing the integrated camera
Figure 40. Installing the screws to secure the integrated camera
5. Connect the integrated camera cable to the system board.
6. Complete the replacement. See “Completing the parts replacement” on page 58.
Replacing the optical drive
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
2. Remove the LCD panel. See “Removing the LCD panel” on page 22.
3. Replace the optical drive.
28 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Figure 44. Pulling out the optical drive bezel
Figure 45. Removing the optical drive bracket
Figure 46. Installing the optical drive bracket
30 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Replacing the optical drive holder
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
2. Remove the LCD panel. See “Removing the LCD panel” on page 22.
3. Disconnect the optical drive cable from the optical drive holder.
4. Replace the optical drive holder.
Figure 50. Removing the optical drive holder
Figure 51. Installing the optical drive holder
5. Connect the optical drive cable to the new optical drive holder.
6. Complete the replacement. See “Completing the parts replacement” on page 58.
Replacing the storage drive
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
32 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
1. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
2. Remove the LCD panel. See “Removing the LCD panel” on page 22.
3. Disconnect the storage drive cable from the system board.
4. Replace the storage drive.
Figure 52. Removing the storage drive bracket
Figure 53. Removing the storage drive bracket shield
Chapter 4.Replacing hardware 33
Figure 54. Removing the storage drive
Figure 55. Installing the storage drive
Figure 56. Installing the storage drive bracket shield
34 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Figure 57. Installing the storage drive
5. Connect the storage drive cable to the system board.
6. Complete the replacement. See “Completing the parts replacement” on page 58.
Replacing the power button board
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
2. Remove the LCD panel. See “Removing the LCD panel” on page 22.
3. Remove the storage drive. See “Replacing the storage drive” on page 32.
4. Disconnect the power button board cable from the system board.
5. Replace the power button board.
Figure 58. Removing the power button board
Chapter 4.Replacing hardware 35
Figure 59. Installing the power button board
6. Connect the power button board cable to the system board.
7. Complete the replacement. See “Completing the parts replacement” on page 58.
Replacing the internal speaker
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
2. Remove the LCD panel. See “Removing the LCD panel” on page 22.
3. Disconnect the internal speaker cable from the system board.
4. Replace the internal speaker.
Figure 60. Removing the internal speaker
36 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Figure 61. Installing the internal speaker
5. Connect the internal speaker cable to the system board.
6. Complete the replacement. See “Completing the parts replacement” on page 58.
Replacing the I/O board
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
2. Remove the LCD panel. See “Removing the LCD panel” on page 22.
3. Disconnect the I/O board cables from the system board.
4. Replace the I/O board.
Figure 62. Removing the I/O board bracket
Chapter 4.Replacing hardware 37
Figure 63. Removing the I/O board
Figure 64. Installing the I/O board
Figure 65. Installing the I/O board bracket
5. Connect the I/O board cables to the system board.
6. Complete the replacement. See “Completing the parts replacement” on page 58.
Replacing the system fan
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
2. Remove the LCD panel. See “Removing the LCD panel” on page 22.
38 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
3. Disconnect the system fan cable from the system board.
4. Replace the system fan.
Figure 66. Removing the system fan
Figure 67. Installing the system fan
5. Connect the system fan cable to the system board.
6. Complete the replacement. See “Completing the parts replacement” on page 58.
Replacing the heat sink
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
2. Remove the LCD panel. See “Removing the LCD panel” on page 22.
3. Depending on the computer model, refer to one of the following to replace the heat sink.
• Type 1
Chapter 4.Replacing hardware 39
Figure 68. Removing the heat sink
Figure 69. Installing the heat sink
• Type 2
40 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Figure 70. Removing the heat sink
Figure 71. Installing the heat sink
4. Complete the replacement. See “Completing the parts replacement” on page 58.
Replacing the memory module
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
If your computer supports one memory module, install the module into the DIMM 1 slot. If your computer
supports two memory modules, install one memory module into the DIMM 1 slot first and then install the
other into the DIMM 2 slot.
1. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
2. Remove the LCD panel. See “Removing the LCD panel” on page 22.
3. Replace the memory module.
Chapter 4.Replacing hardware 41
Figure 72. Opening the memory module retainer
Figure 73. Removing the memory module
Figure 74. Installing the memory module
Figure 75. Closing the memory module retainer
4. Complete the replacement. See “Completing the parts replacement” on page 58.
42 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Replacing the M.2 solid-state drive
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
2. Remove the LCD panel. See “Removing the LCD panel” on page 22.
3. Depending on the computer model, refer to one of the following to replace the M.2 solid-state drive.
• Type 1
Figure 76. Peeling off the tape from the M.2 solid-state drive
Figure 77. Removing the screw
Chapter 4.Replacing hardware 43
Figure 78. Removing the M.2 solid-state drive
Figure 79. Installing the M.2 solid-state drive
Figure 80. Installing the screw
44 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Figure 84. Removing the M.2 solid-state drive
Figure 85. Installing the M.2 solid-state drive
Figure 86. Installing the screw
Figure 87. Sticking the tape to the new M.2 solid-state drive
4. Complete the replacement. See “Completing the parts replacement” on page 58.
46 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Replacing the microprocessor
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
CAUTION:
The heat sink might be very hot. Before you open the computer cover, turn off the computer
and wait several minutes until the computer is cool.
1. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
2. Remove the LCD panel. See “Removing the LCD panel” on page 22.
3. Remove the heat sink. See “Replacing the heat sink” on page 39.
4. Replace the microprocessor.
Notes:
• Your microprocessor and socket might look different from the one illustrated.
• Touch only the edges of the microprocessor. Do not touch the gold contacts on the bottom.
• Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be
kept as clean as possible.
Figure 88. Unlocking the microprocessor socket retainer
Chapter 4.Replacing hardware 47
Figure 89. Tilting the microprocessor socket upward
Figure 90. Removing the microprocessor
48 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Figure 92. Tilting the microprocessor socket downward
Figure 93. Locking the microprocessor socket retainer
5. Complete the replacement. See “Completing the parts replacement” on page 58.
Replacing the Wi-Fi card
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
50 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Figure 98. Connecting the Wi-Fi antennas
Figure 99. Install the Wi-Fi card shield
4. Complete the replacement. See “Completing the parts replacement” on page 58.
Replacing the Wi-Fi antennas
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
2. Remove the LCD panel. See “Removing the LCD panel” on page 22.
3. Remove the internal speakers. See “Replacing the internal speaker” on page 36.
4. Remove the I/O board. See “Replacing the I/O board” on page 37.
5. Replace the Wi-Fi antennas.
52 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Figure 100. Removing the Wi-Fi antennas
Figure 101. Installing the Wi-Fi antennas
6. Complete the replacement. See “Completing the parts replacement” on page 58.
Replacing the system board
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
2. Remove the LCD panel. See “Removing the LCD panel” on page 22.
3. Remove the heat sink. See “Replacing the heat sink” on page 39.
4. Remove the microprocessor. See “Replacing the microprocessor” on page 47.
5. Remove the memory module. See “Replacing the memory module” on page 41.
6. Remove the Wi-Fi card. See “Replacing the Wi-Fi card” on page 50.
7. Remove the M.2 solid-state drive. See “Replacing the M.2 solid-state drive” on page 43.
8. Record the cable routing and cable connections, and then disconnect all cables from the system board.
See “System board” on page 4.
9. Remove the screws that secure the system board to remove the system board.
Note: Carefully handle the system board by its edges.
Chapter 4.Replacing hardware 53
Figure 102. Removing the screws that secure the system board
10. Install the screws to secure the new system board.
11. Route all the cables that you disconnected from the failing system board, and then reconnect the cables
to the new system board. See “System board” on page 4.
12. Complete the replacement. See “Completing the parts replacement” on page 58.
Replacing the coin-cell battery
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
Your computer has a special type of memory that maintains the date, time, and settings for built-in features,
such as parallel connector assignments (configurations). A coin-cell battery keeps this information active
when you turn off the computer.
The coin-cell battery normally requires no charging or maintenance throughout its life; however, no coin-cell
battery lasts forever. If the coin-cell battery fails, the date, time, and configuration information (including
passwords) are lost. An error message is displayed when you turn on the computer.
1. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
2. Remove the LCD panel. See “Removing the LCD panel” on page 22.
3. Remove the heat sink. See “Replacing the heat sink” on page 39.
4. Remove the microprocessor. See “Replacing the microprocessor” on page 47.
5. Remove the memory module. See “Replacing the memory module” on page 41.
6. Remove the Wi-Fi card. See “Replacing the Wi-Fi card” on page 50.
7. Remove the M.2 solid-state drive. See “Replacing the M.2 solid-state drive” on page 43.
8. Remove the system board. See “Replacing the system board” on page 53.
9. Replace the coin-cell battery.
54 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Figure 105. Installing the coin-cell battery
Figure 106. Pressing the coin-cell battery downward
10. Complete the replacement. See “Completing the parts replacement” on page 58.
To dispose of the coin-cell battery, refer to the “Lithium coin-cell battery notice” topic in the Safety and
Warranty Guide.
Replacing the system board frame
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
2. Remove the LCD panel. See “Removing the LCD panel” on page 22.
3. Remove the heat sink. See “Replacing the heat sink” on page 39.
4. Remove the microprocessor. See “Replacing the microprocessor” on page 47.
5. Remove the memory module. See “Replacing the memory module” on page 41.
56 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
6. Remove the Wi-Fi card. See “Replacing the Wi-Fi card” on page 50.
7. Remove the M.2 solid-state drive. See “Replacing the M.2 solid-state drive” on page 43.
8. Remove the system board. See “Replacing the system board” on page 53.
9. Replace the system board frame.
Figure 107. Removing the system board frame
Figure 108. Installing the system board frame
10. Complete the replacement. See “Completing the parts replacement” on page 58.
Replacing the VESA mount bracket
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the monitor stand. See “Replacing the monitor stand” on page 20.
2. Remove the LCD panel. See “Removing the LCD panel” on page 22.
3. Remove the system fan. See “Replacing the system fan” on page 38.
4. Remove the heat sink. See “Replacing the heat sink” on page 39.
5. Remove the microprocessor. See “Replacing the microprocessor” on page 47.
6. Remove the memory module. See “Replacing the memory module” on page 41.
Chapter 4.Replacing hardware 57
7. Remove the Wi-Fi card. See “Replacing the Wi-Fi card” on page 50.
8. Remove the M.2 solid-state drive. See “Replacing the M.2 solid-state drive” on page 43.
9. Remove the system board. See “Replacing the system board” on page 53.
10. Remove the system board frame. See “Replacing the system board frame” on page 56.
11. Replace the VESA mount bracket.
Figure 109. Removing the VESA mount bracket
Figure 110. Installing the VESA mount bracket
12. Complete the replacement. See “Completing the parts replacement” on page 58.
Completing the parts replacement
After completing the installation or replacement for all parts, reinstall the computer cover and reconnect the
cables.
To reinstall the computer cover and reconnect the cables to your computer, do the following:
58 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside your computer.
2. Ensure that the cables are routed correctly before reinstalling the computer cover. Keep cables clear of
the hinges and sides of the computer chassis to avoid interference when reinstalling the computer
cover.
3. Reinstall the LCD panel.
Figure 111. Connecting the LCD cables to the system board
Figure 112. Installing the computer cover
Chapter 4.Replacing hardware 59
Figure 113. Installing or tightening the screws
4. Install the computer stand.
5. Place the computer in an upright position.
6. If a locking device is available, use it to lock the computer.
7. Reconnect the external cables and power cords to the corresponding connectors on the computer.
60 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Appendix A. Notices
Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult
your local Lenovo representative for information on the products and services currently available in your
area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that
Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service
that does not infringe any Lenovo intellectual property right may be used instead. However, it is the user's
responsibility to evaluate and verify the operation of any other product, program, or service.
Lenovo may have patents or pending patent applications covering subject matter described in this
document. The furnishing of this document does not give you any license to these patents. You can send
license inquiries, in writing, to:
Lenovo (United States), Inc.
1009 Think Place - Building One
Morrisville, NC 27560
U.S.A.
Attention: Lenovo Director of Licensing
LENOVO PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow
disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to
you.
This information could include technical inaccuracies or typographical errors. Changes are periodically made
to the information herein; these changes will be incorporated in new editions of the publication. Lenovo may
make improvements and/or changes in the products and/or the programs described in this publication at any
time without notice.
The products described in this document are not intended for use in implantation or other life support
applications where malfunction may result in injury or death to persons. The information contained in this
document does not affect or change Lenovo product specifications or warranties. Nothing in this document
shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or
third parties. All information contained in this document was obtained in specific environments and is
presented as an illustration. The result obtained in other operating environments may vary.
Lenovo may use or distribute any of the information you supply in any way it believes appropriate without
incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in
any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the
materials for this Lenovo product, and use of those Web sites is at your own risk.
Any performance data contained herein was determined in a controlled environment. Therefore, the result
obtained in other operating environments may vary significantly. Some measurements may have been made
on development-level systems and there is no guarantee that these measurements will be the same on
generally available systems. Furthermore, some measurements may have been estimated through
extrapolation. Actual results may vary. Users of this document should verify the applicable data for their
specific environment.
© Copyright Lenovo 2018 61
62 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
Appendix B. Trademarks
The following terms are trademarks of Lenovo in the United States, other countries, or both:
Lenovo
The Lenovo logo
VESA is a trademark of the Video Electronics Standards Association.
The terms HDMI and HDMI High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
Other company, product, or service names may be trademarks or service marks of others.
© Copyright Lenovo 2018 63
64 Lenovo V530-22ICB AIO User Guide and Hardware Maintenance Manual
