LevelOne FEP-0800W65 User Manual
Displayed below is the user manual for FEP-0800W65 by LevelOne which is a product in the Network Switches category. This manual has pages.
Related Manuals
1
FEP-0800
8 FE PoE Switch
User Manual
Ver 1.0
2
1. Introductions
Thank you for purchasing the PoE Switch.
The PoE Switch, is a 8-port 10/100Mbps PoE Switch with PoE On/Off control capability. With 8
dip switches, each PoE port can be manually set for On-Off control. 8-Port PoE Switch supports
up to 15.4W/30W on each LAN port when the corresponding port DIP switch is set ON.
The PoE Switch supports power protections as OVP (Over Voltage Protection), OCP (Over
Current Protection), OTP (Over Temperature Protection), robust short-circuit protection and surge
protection. You may also make use of PoE repeater to extend another 100 meters or serveral 100
meters distance if multiple PoE repeaters are cascaded.
2. Application
PoE Switch Connects with PoE PD Devices
3. Packing Contents
Inside the package you shall find:
(1) 8-Port PoE Switch
(2) Power Adapter
(3) User Manual
Please check if the packing is damaged or any component is missing. If so, please contact your
distributor.
3
4. Technical Specifications
Standards
IEEE 802.3/u 10/100BaseT/TX
IEEE 802.3x Flow Control
Midspan PoE compliant
Features
MAC Address: 4K
Buffer Memory: 512KB
Transmission Method: Store and Forward
Filtering/Forwarding Rates
100Mbps port - 148,800pps
10Mbps port - 14,880pps
Transmission Media
10BaseT Cat. 3, 4, 5 UTP
100BaseTX Cat. 5 UTP
PoE on each Port
30W
Output PoE Pin
4, 5, 7, 8
LED Indicators
Port 1~8: 10/100M, PoE ON/OFF, Power
Power Adaptor
Input: 100-240VAC, 50~60Hz
Output: 56VDC 1.6A (90W)
Dimensions
165 × 100 × 40 mm (L x W x H)
Weight
0.6 kg
Operating Temperature
0 to 50℃
Humidity
10 to 90% RH (non-condensing)
Certifications
FCC Class A, CE
5. LED Indicators
On the front panel of 8-Port FE PoE Switch, there are 17 LED indicators as the following;
POWER: “Green On” indicates power is on and normal.
Port 1~8 LAN: “Green On” indicates each Ethernet LAN port is in connection.
PoE: “Green On” indicates Power over Ethernet function is enabled for each port.
“OFF” indicates the PoE is disabled, and it becomes a regular LAN port.
6. Dip Switch Settings vs Power over Ethernet
Note that the dip switches can be switched ON and OFF anytime. However, it is
suggested that the dip switches be set ready before the PoE port is connected for
power management.
The device will be re-started if the overall PoE power consumption is over the
power budget. Please make less PoE ports enabled when over the power
budget.
1 ~ 8 ports DIP ON
Per PoE Port
15.4/30 Watts Injected
Maximum PoE Power
85 Watts