LevelOne WAP-6221 User Manual
Displayed below is the user manual for WAP-6221 by LevelOne which is a product in the Wireless Access Points category. This manual has pages.
Related Manuals
密级
WAP-6221
N300 PoE Wireless Access Point, In-Wall
Mount, Controller Managed
User’s Manual
V1. 1_20170111
2
密级
Contents
CHAPTER 1 EQUIPMENT INSTRUCTION AND POWER SUPPLY ......... 4
1. AP INSTALLATION： ..................................................................... 4
2. POE POWER SUPPLY： .................................................................... 4
3. OPERATION MODE DESCRIPTION AND USAGE: ................................................... 4
CHAPTER 2 RUN AND LOGIN ...................................................................... 6
CHAPTER 3. OPERATION MODE SETTING .............................................. 7
1. Router operation: ................................................................................................................................................. 8
2. Repeater operation: .............................................................................................................................................. 8
3. Wireless Coverage: ............................................................................................................................................ 10
CHAPTER 4 SYSTEM TOOLS AND ADVANCED SETTINGS: ................ 12
1.SYSTEM TO O L S ......................................................................... 12
2.WIRELESS ............................................................................. 13
3.NETWORK SETTING ...................................................................... 14
4.MANAGEMENT ........................................................................... 15
4.1 System .................................................................................................................................. 15
4.2 User ...................................................................................................................................... 16
4.3 Logs ...................................................................................................................................... 16
4.4 Upgrade Firmware ............................................................................................................. 17
4.5 System Time ........................................................................................................................ 17
APPENDIX A LICENSE STATEMENT / GPL CODE STATEMENT.......... 19
3
密级
This quickly guider is for our 300Mbps in wall AP. It will instruct you how to
configure and manage this Access Point/Router/Repeater in right ways.
Packing Contents:
● 300Mbps in wall AP
● QIG
● Setting accessory
4
密级
Chapter 1 Equipment Instruction and Power Supply
1. AP Installation：
2. PoE Power supply：
There are two way to supply power for this device:
A. PoE Switch: pls make sure the PoE switch comply with IEEE 802.3af standard; then connect switch and
in wall AP as follow:
P2 Power Supply
3. Operation Mode description and usage:
There are three operation mode in our in wall AP: Internet Settings, Wireless Repeater, Wireless
Coverage
Internet Settings: WAN Connection, from cable internet to Wifi internet by setup PPPoE, Dynamic
IP, Static IP or PPTP in Internet Settings
Attent
ion
wrong connection may damage the device.
5
密级
P3 Internet Setting
Wireless Repeater：The in wall AP can bridge and extend the existing WiFi signal in this operation
mode, for example: this in wall AP bridge and extend the existing Wifi Signal from router, then PC will
connect with WiFi Repeater as follow:
P4 Wireless Repeater
Wireless Coverage Mode: LAN cable from Switch to in wall AP, then wired networking will change
to Wireless network via Wireless Coverage mode. it suit for hotel, travel, business trip, home
P5 Wireless Coverage Operation mode
Description of LED Status:
LED Status
Woking Status
Flash fast
Networking connecting
Flash slow
Networking connection success
Flash off
Networking connection failure
6
密级
Chapter 2 Run and Login
A. Power this in wall AP in right way
B. Set an IP address for your PC: configure local IP address as 192.168.188.X(X can be selected from
2-254), the same network segment as this access point, subnet mask is 255.255.255.0
P6 IP Address configure
C. Connect in wall AP with PC by LAN Cable or Wireless
Pls note, if connect in wall with PC by wireless, then the default SSID is Levelone 2.4G, default
passwords are 66666666.
D. Log in: type 192.168.188.253 in your IE, will pop up following picture, pls input admin/admin in User
name/Password to Log into this in wall AP
7
密级
P7 Login
Chapter 3. Operation mode setting
Log into 192.168.188.253 in your Internet Explorer and input user name/Passwords, following device status
will be showed, then you can set this in wall AP as Router/Repeater/AP from Quick Setup:
P8 Device Status
Pls note, if signal strength is blue, mean work fine,
8
密级
if signal strength is red, there is some connection problem.
1. Router operation:
Click Internet Settings, then will see following page, pls choose dynamic IP or PPPOE, then input the user
name, passwords in PPPOE part, after that can change the SSID, Channel, Key as you like, then apply.
P9 Internet Setting
2. Repeater operation:
Click Wireless Repeater, then will see following page:
9
密级
P10 Wireless Repeater
Then scan AP, choose AP, input AP’s passwords to finish the connection setting.
P11 Scan AP
If you want to change this device’s SSID, channel, Key, then set it from Wireless Part. After that, then apply.
10
密级
P12 Internet Setting
3. Wireless Coverage:
click wireless coverage, then will appear following page, change the SSID, Key, Channel as you like, then
apply.
11
密级
P13 Wireless Coverage
After finish the setting, then cancel the IP address you setted for your PC, then the internet setting
is finished.
P14 Obtain IP address automatically
12
密级
Chapter 4 System Tools and Advanced Settings:
1.System Tools
P15 System Tools
In system tools, you can ping any IP address/Domain easy to check the AP’s working status.
13
密级
P16 Advanced Setting
In Advanced Setting, you can set operation mode, SSID, IP address setting, Channel setting, management and
firmware upgrade, let’s show how to upgrade firmware and revert to default.
2. Wireless
In basic setting, you can change the SSID, Region, mode and decide the encryption type and key to SSID.
Intelligent analysis can help you to choose the best channel.
In Virtual AP, you are allowed to use three virtual ap. Please select the SSID first and then enable it. For
instance, i would like to use the VAP1, I should select VAP1 as below and then enable it. After being enabled,
you can configure the details of the AP.After configuration, please apply them.
14
密级
3. Network Setting
In this page, users can set up the basic LAN setting
Under AP Mode, DHCP from Controller means you are allowing the controller to control the IP of the
AP(originally 192.168.188.253) . Therefore the controller can find and manage the AP.
15
密级
When you choose Fixed IP, that means the AP is having the right to decide its own IP instead of being totally
controlled by controller. However, when the IP Address is in the same network segment as controller’s, can the
controller find and manage the AP. Take one for example, when controller’s IP is 192.168.10.1, and only when
AP’s IP is 192.168.10.X can the controller find and manage the AP.
4.Management
4.1 System
16
密级
Press the WPS/Reset button until the LED light off. Click Reset Default from
System.
P18 Reset Default
Backup function allows you to save the current configuration to your PC.
Restore helps you to apply your configuration you saved before in your PC.
Reset Default and Reboot the device just with one click.
4.2 User
Change the user name and password for Log in
4.3 Logs
Logs helps to record the running history of the device which will help you a lot when you have trouble with
this device.You can copy the logs and send it to consult your engineers.
17
密级
4.4 Upgrade Firmware
Browse and choose the firmware should upgrade from above picture, then click upgrade.
After that click Reset Default from System to finish firmware
upgrade
P17 Firmware upgrade
4.5 System Time
In this part, you can set the time of the device. NTP server can only work under Gateway mode. When NTP
server is chosen, Sync with host will be unavailable. When it connects with controller click Sync with Host, it
will get time from controller rather than from PC.
When device running at xx:xx will reboot the device automatically at xx:xx.
18
密级
19
密级
Appendix A LICENSE STATEMENT / GPL
CODE STATEMENT
This product resp. the here
(http://global.level1.com/downloads.php?action=init) for
downloading offered software includes software code developed
by third parties, including software code subject to the GNU
General Public License Version 2 (“GPLv2”) and GNU Lesser
General Public License 2.1 („LGPLv2.1“).
WRITTEN OFFER FOR GPL/LGPL
SOURCE CODE
We will provide everyone upon request the applicable GPLv2 and
LGPLv2.1 source code files via CDROM or similar storage
medium for a nominal cost to cover shipping and media charges
as allowed under the GPLv2 and LGPLv2.1. This offer is valid for 3
years. GPLv2 and LGPLv2 inquiries: Please direct all GPL and
LGPL inquiries to the following address:
Digital Data Communications GmbH
Zeche-Norm-Str. 25
44319 Dortmund
Deutschland
Phone: +49 231 9075 - 0
20
密级
Fax: +49 231 9075 - 184
Email: support@level1.com
Web: www.level1.com
NO WARRANTY
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. See the GNU General Public License for more details.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR
AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR
ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE
PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA
OR DATA BEING RENDERED INACCURATE OR LOSSES
SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF
THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
21
密级
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General
Public License is intended to guarantee your freedom to share and
change free software--to make sure the software is free for all its
users. This General Public License applies to most of the Free
Software Foundation's software and to any other program whose
authors commit to using it. (Some other Free Software Foundation
software is covered by the GNU Lesser General Public License
instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that
you have the freedom to distribute copies of free software (and
charge for this service if you wish), that you receive source code or
can get it if you want it, that you can change the software or use
pieces of it in new free programs; and that you know you can do
these things.
22
密级
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the
rights. These restrictions translate to certain responsibilities for you
if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get
the source code. And you must show them these terms so they
know their rights.
We protect your rights with two steps: (1) copyright the software,
and (2) offer you this license which gives you legal permission to
copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make
certain that everyone understands that there is no warranty for this
free software. If the software is modified by someone else and
passed on, we want its recipients to know that what they have is
not the original, so that any problems introduced by others will not
reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making
the program proprietary. To prevent this, we have made it clear
that any patent must be licensed for everyone's free use or not
licensed at all.
23
密级
The precise terms and conditions for copying, distribution and
modification follow.
TERMS AND CONDITIONS FOR
COPYING, DISTRIBUTION AND
MODIFICATION
0. This License applies to any program or other work which
contains a notice placed by the copyright holder saying it may be
distributed under the terms of this General Public License. The
"Program", below, refers to any such program or work, and a "work
based on the Program" means either the Program or any
derivative work under copyright law: that is to say, a work
containing the Program or a portion of it, either verbatim or with
modifications and/or translated into another language. (Hereinafter,
translation is included without limitation in the term "modification".)
Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the
Program is covered only if its contents constitute a work based on
the Program (independent of having been made by running the
Program). Whether that is true depends on what the Program
does.
1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
24
密级
conspicuously and appropriately publish on each copy an
appropriate copyright notice and disclaimer of warranty; keep
intact all the notices that refer to this License and to the absence of
any warranty; and give any other recipients of the Program a copy
of this License along with the Program.
You may charge a fee for the physical act of transferring a copy,
and you may at your option offer warranty protection in exchange
for a fee.
2. You may modify your copy or copies of the Program or any
portion of it, thus forming a work based on the Program, and copy
and distribute such modifications or work under the terms of
Section 1 above, provided that you also meet all of these
conditions:
a) You must cause the modified files to carry prominent notices
stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in
whole or in part contains or is derived from the Program or any part
thereof, to be licensed as a whole at no charge to all third parties
under the terms of this License.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
25
密级
interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide a
warranty) and that users may redistribute the program under these
conditions, and telling the user how to view a copy of this License.
(Exception: if the Program itself is interactive but does not normally
print such an announcement, your work based on the Program is
not required to print an announcement.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate
works in themselves, then this License, and its terms, do not apply
to those sections when you distribute them as separate works. But
when you distribute the same sections as part of a whole which is
a work based on the Program, the distribution of the whole must be
on the terms of this Lic ense, whose permissions for other
licensees extend to the entire whole, and thus to each and every
part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Program.
In addition, mere aggregation of another work not based on the
Program with the Program (or with a work based on the Program)
26
密级
on a volume of a storage or distribution medium does not bring the
other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms
of Sections 1 and 2 above provided that you also do one of the
following:
we use this doubled UL to get the sub-sections indented, while
making the bullets as unobvious as possible.
a) Accompany it with the complete corresponding
machine-readable source code, which must be distributed under
the terms of Sections 1 and 2 above on a medium customarily
used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years,
to give any third party, for a charge no more than your cost of
physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to
distribute corresponding source code. (This alternative is allowed
only for noncommercial distribution and only if you received the
27
密级
program in object code or executable form with such an offer, in
accord with Subsection b above.)
The source code for a work means the preferred form of the work
for making modifications to it. For an executable work, complete
source code means all the source code for all modules it contains,
plus any associated interface definition files, plus the scripts used
to control compilation and installation of the executable. However,
as a special exception, the source code distributed need not
include anything that is normally distributed (in either source or
binary form) with the major components (compiler, kernel, and so
on) of the operating system on which the executable runs, unless
that component itself accompanies the executable.
If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this
License. However, parties who have received copies, or rights,
from you under this License will not have their licenses terminated
so long as such parties remain in full compliance.
28
密级
5. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify
or distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so,
and all its terms and conditions for copying, distributing or
modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on
the Program), the recipient automatically receives a license from
the original licensor to copy, distribute or modify the Program
subject to these terms and conditions. You may not impose any
further restrictions on the recipients' exercise of the rights granted
herein. You are not responsible for enforcing compliance by third
parties to this License.
7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement
or otherwise) that contradict the conditions of this License, they do
not excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under
this License and any other pertinent obligations, then as a
consequence you may not distribute the Program at all. For
example, if a patent license would not permit royalty-free
29
密级
redistribution of the Program by all those who receive copies
directly or indirectly through you, then the only way you could
satisfy both it and this License would be to refrain entirely from
distribution of the Program.
If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended
to apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee
cannot impose that choice.
This section is intended to make thoroughly clear what is believed
to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this
License may add an explicit geographical distribution limitation
30
密级
excluding those countries, so that distribution is permitted only in
or among countries not thus excluded. In such case, this License
incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new
versions of the General Public License from time to time. Such
new versions will be similar in spirit to the present version, but may
differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the
Program specifies a version number of this License which applies
to it and "any later version", you have the option of following the
terms and conditions either of that version or of any later version
published by the Free Software Foundation. If the Program does
not specify a version number of this License, you may choose any
version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the
author to ask for permission. For software which is copyrighted by
the Free Software Foundation, write to the Free Software
Foundation; we sometimes make exceptions for this. Our decision
will be guided by the two goals of preserving the free status of all
derivatives of our free software and of promoting the sharing and
reuse of software generally.
NO WARRANTY
31
密级
11. BECAUSE THE PROGRAM IS LICENSED FREE OF
CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO
THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT
WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE
PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD
THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE
COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW
OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER,
OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE
PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA
OR DATA BEING RENDERED INACCURATE OR LOSSES
SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF
32
密级
THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your
New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under
these terms.
To do so, attach the following notices to the program. It is safest to
attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at
least the "copyright" line and a pointer to where the full notice is
found.
one line to give the program's name and an idea of what it does.
Copyright (C) yyyy name of author
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
33
密级
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301, USA.
Also add information on how to contact you by electronic and
paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details
type `show w'. This is free software, and you are welcome
to redistribute it under certain conditions; type `show c'
for details.
The hypothetical commands `show w' and `show c' should show
the appropriate parts of the General Public License. Of course, the
commands you use may be called something other than `show w'
and `show c'; they could even be mouse-clicks or menu
items--whatever suits your program.
You should also get your employer (if you work as a programmer)
or your school, if any, to sign a "copyright disclaimer" for the
program, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright
interest in the program `Gnomovision'
(which makes passes at compilers) written
by James Hacker.
signature of Ty Coon, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your
program into proprietary programs. If your program is a subroutine
library, you may consider it more useful to permit linking
proprietary applications with the library. If this is what you want to
do, use the GNU Lesser General Public License instead of this
34
密级
License.
Notification of Compliance
Europe - EU Declaration of Conformity
For complete DoC please visit
http://global.level1.com/downloads.php?action=init
GPL License Agreement
GPL may be included in this product, to view the GPL license agreement goes to
http://download.level1.com/level1/gpl/GPL.pdf
For GNU General Public License (GPL) related information, please visit
http://global.level1.com/downloads.php?action=init